Embed Size (px)
Citation preview
Wiztech Automation Solutions
www.plctraininginchennai.net
Ph: +91 99404 26826 - 044-2620 9369 #71, W-Block, 3rd Street,Anna nagar roundana,
Anna nagar,Chennai – 600 040.
Chennai’s Best PLC Training in Chennai:-Join the next generation of Automation engineers. Embrace a well paid, intensive yet enjoyable
Career by taking this comprehensive and practical course. It is delivered by Practical learning
and presented by some of the leading automation training in Chennai, Instrumentation and
control engineering instructors.
There is a Critical shortage of automation, instrumentation and control engineers around the
world now due to retirement, restructuring and rapid growth in new industries and technologies.
The respected ISA organization estimated that at least 15,000 new automation engineers are
needed annually in the US, alone.
PLC training is the best technical training in automation field. PLC Training is the advanced training in Automation field. So PLC Training in Chennai is best for engineering candidates. Wiztech is the best PLC training centre in Chennai, which is give the best practical training in PLC Automation. Candidates need PLC Training in Chennai and wiztech is the best PLC Training institute in Chennai. Not only PLC Training in Chennai, wiztech provides, Free accommodation in Chennai. Wiztech provides the advanced PLC Training in Chennai.
International Accreditation Certification(IAO)
It fosters excellence in education through the development of criteria and guidelines for assessing
educational effectiveness.
It encourages institutional improvement of educational endeavors through continuous self-study and
evaluation.
It ensures the confidence of educational community, the general public, and other agencies of
organizations, educational institutions
These standards allow the accreditation body to appraise a wide variety of institutions, differing in
purpose, size, and Organization, scope of program, support and control.
In addition to making decisions on the accreditations of institutions, the Accreditation Commission is also
responsible for reviewing IAO’s Conditions, standards and criteria from time to time. Any changes
considered appropriate will be recommended to the Committee which may decide to implement them.
Our Progress dependent upon the annual evaluations conducted by IAO and their suggestions will be
implemented with due respect to improve the standard Training and learning.
International Standard Organization(ISO)
ISO 9001:2008 sets out the criteria for a quality management system and is the only standard in
the family that can be certified to (although this is not a requirement).
ISO, the International Organization for Standardization. Develop and publish International
Standards. ISO International Standards ensure that products and services are safe, reliable and of good
quality. It can be used by any organization, large or small, regardless of its field of activity. In fact ISO
9001:2008 is implemented by over one million companies and organizations in over 170 countries.
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.
104, W-block, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
See our web & Live Chat with us@http://www.plctraininginchennai.nethttp://www. wiztechautomationsolutions.com http://www.industrialautomation.net.inhttp://www.scadatraining.net
Engineering Final Year ProjectsStudents from engineering final year want to do final year projects. But they have some doubts about, which domain have to select and which project is best for future and new in technology and how to start the project and what are the steps are there to finish the project. Here Wiztech is help to students these questions. Wiztech is give full support to students to finish their final year projects in IEEE and non-IEEE papers with 100% practical experience of their projects. This is what students really want. Wiztech fulfill the student requirements and supporting their placement in core industry.
You can download our project titles also:-http://enggfinalyearproject.wix.com/projecttitles#!downloads/c1qp1
For more details about project topic and base papers,Wiztech Automation Solutions pvt ltd.,
Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.
Mail us:[email protected]:http://enggfinalyearproject.wix.com/projecttitles http://www.ieeeprojectcentre.com
Engineering final year project - Best Project Centre (IEEE & non-IEEE)Wiztech – 9940426826. Is the best engineering final year project Centre for IEEE and
non-IEEE projects in latest advanced technology with 100% practical hands-on projects handling and individual batch guidance and full support to finish their projects on time.
Students from engineering final year wants to do final year projects. But they have some doubts about, which domain have to select and which project is best for future and new in technology and how to start the project and what are the steps are there to finish the project. Here Wiztech is help to students these questions. Wiztech is give full support to students to finish their final year projects in IEEE and non-IEEE papers with 100% practical experience of their projects. This is what students really want. Wiztech Fulfill the students requirements and supporting their placement in core industry.
The Projects Domains are, Embedded system, PLC, SCADA, Mechanical, VLSI, Software, Simulation projects, Lab view, Mat-lab projects, WirelessDSP/IPJava ProjectsC++ ProjectsAndroid projects, Real time projects, Robotics projects, Electrical projects, Instrumentation projects, Arduino projects, etc.,
We will provide below additional benefits for our students, Time on delivery
International certification for projects Company project certificate. Attendance certificate Accommodation Placement assistance. Interview Training.
Wiztech done the projects in the department of M.E., B.E., and Diploma and B.Sc., electronics, M.Sc., electronics in the department of ECE Department final year projects, EEE Department final year projects, E&I Department final year projects, Mechanical Department final year projects, Computer Department final year projects, CSE Department final year projects, I.T Department final year projects, VLSI Department final year projects, Embedded Department final year projects, etc.,
You can download our project titles also:-http://enggfinalyearproject.wix.com/projecttitles#!downloads/c1qp1
For more details about project topic and base papers,Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
Live Chat web: http:// www.plctraininginchennai.net http:// www.vlsitraininginchennai.com
Live Chat with us@
http://www.enggfinalyearproject.wix.com/projecttitleshttp://www.plctraininginchennai.nethttp://www.wiztechautomationsolutions.comhttp://www.industrialautomation.net.inhttp://www.scadatraining.net
Advanced PLC Training in Chennai | Best PLC SCADA Training in ChennaiWiztechproviding the best practical training in Chennai. Wiztech is the best leading company, which is providing the advanced practical training in PLC, SCADA, DCS, VFD, HMI, Embedded, and VLSI Training with international training certification and free placement service.
Wiztech Automation Solutions pvt ltd.,
Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.
Mail us:[email protected]:-www.plctraininginchennai.netwww.industrialautomation.net.inwww.scadatraining.net
Advanced DCS Training in Chennai | Best SCADA Training in IndiaSCADA (Supervisory Control and Data Acquisition) is the advanced software that used to monitor the process of the plant control through system. We can also control the same. So it is used in insecure automation process or where the high security needed. Wiztech is the best way to control and monitor the process. SCADA is only used monitor and control the Automation process, which is already programmed and executed by PLC (Programmable Logic Controller).
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.
Mail us:[email protected]:-www.plctraininginchennai.netwww.industrialautomation.net.inwww.scadatraining.net
PLC Automation Training and VFD Training in ChennaiWiztech provides PLC Automation and VFD Training in Chennai, with advanced syllabus and international certification. Wiztech provides Free Accommodation for outstation candidates. Wiztech is the best institute for learning the PLC, SCADA, DCS, embedded, VLSI Automation classes with 100% practical and free placement.
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)
Chennai – 600040.Tamilnadu.
Mail us:[email protected]:-www.plctraininginchennai.netwww.industrialautomation.net.inwww.scadatraining.net
Embedded System Training in Chennai | PLC Automation Training in ChennaiEmbedded and PLC Automation are the two major part in Automation industry.
This practical course avoids too much emphasis on theory. This is rarely needed in the real world of industry where time is short and immediate results, with hard-hitting and useful know-how, are required as a minimal requirement. Call @ 9940426826.
The objective of this course is to impart a solid understanding of the role of embedded systems and embedded systems design and development. Students completing this course will have a framework for evaluating, developing, implementing and integrating embedded systems software projects in this high demand field and will understand the role of embedded systems in the context of complex engineering systems.
Opportunities in PLC SCADA Industries with Training in Chennai In core industries there are more job opportunities but the Candidates still having placement problems. The reason is the lagging of practical knowledge in students to work in a very big plants and highly technical oriented process. If the candidates having the practical knowledge in technical process, companies are pick them with competition and they are ready to pay high scales. Students must understand this demand in core industry. If they ready to learn practical automation training with practical then they don't have placement issues thereafter. Automation are mainly segregated by two major parts of technology. One is PLC Automation and another one is Embedded, VLSI Automation. Wiztech Automation is the leading automation training Centre in Chennai. Wiztech provides PLC Automation and Embedded system Training in Chennai to train the students 100% practical manner and give them placement assistance. Here candidates can get free accommodation for the training period. So Wiztech Automation Solution is the best PLC Training Centre in Chennai and it is also the Best Embedded system Training institute in Chennai and VLSI Training institute in Chennai.
Here is the, Wiztech Automation Solutions Address:-Wiztech Automation Solutions pvt ltd.,
Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar, (Near Indian bank)Chennai – 600 040.Tamilnadu. Mail us: [email protected]:-www.wiztechautomationsolutions.comwww.plctraininginchennai.netwww.industrialautomation.net.inwww.scadatraining.net
Wiztech having the best fee structure for Automation Training (PLC Automation, Embedded system and VLSI Automation). Not only this is, we have many slots in Fee structure. We know the student back ground and fresher’s financial capacity. Candidates can select the fees, which is more affordable to them. And we have more offers for candidates to encourage them. We are also providing free accommodation for who come from out of city and our Placement services are free of cost only.
For all the above features, Wiztech is the best Automation Training Institute in Chennai for Learning advanced Technology with affordable fees.
Feel free to call us for your customized offers.
Call @ +91 99404 26826, 044-2620 9369.
Mail to: [email protected]@[email protected]
Address: 102, W-block, 2nd & 3rd floor, 2nd Avenue, Anna nagar roundana, Anna nagar, (Near Indian bank) Chennai – 600 040. Tamilnadu.
Wiztech - 9940426826 - www.plctraininginchennai.net is the best PLC Training Centre in Chennai. Wiztech provides 100% practical training with Free Accommodation and Placement. Pls tell me the what are the other advantages in Wiztech?
Advanced PLC Automation Training for fulfill next generation job vacancy
PLC training www.plctraininginchennai.net is the heart of the Automation technology. Nowadays Major Automation processes are done by PLC Only. You can learn this PLC Automation technology in Wiztech Automation.
PLC Automation uses in core industry are widely improves by the competition of world production. By improving production quality and quantity in the highly competition market we have use the Advanced PLC Automation process only. In that PLC is the heart of the automation processes. In wiztech Automation in Anna nagar. Wiztech is the best PLC Training Centre in Chennai. Candidates must learn industrial automation for practically. So Wiztech understand the industrial needs and students lagging area for fit into industrial Automation process. Wiztech Concentrate in this area to fulfill the pit of the student’s weaken areas. For working in industrial automation, which is using advanced process of automation technology, student must training for that, like had training in Advanced PLC Training, 100% practical training, individual focus, industrial automation training, best technical lab, individually project handling capacity, working knowledge in live industrial process.
So, wiztech know these important things and give the best training to candidates and to fit the above needed in industries. Wiztech provides advanced diploma Automation training with international certification and 100% practical. Wiztech provides, FREE Accommodation, Free Placement service, Live Project Training, Individual Focus, 100% Practical Training, IAO Certification, Best Fee structures in Chennai. So if you want to do PLC, SCADA, DCS and Embedded, VLSI Training just enquire in Wiztech. Wiztech is the Best Automation Training Institute. Embedded - VLSI - PLC – SCADA – DCS is the Advanced Job oriented technology in Automation field.
Wiztech Provides Above these Trainings with 100% Hand-on manner. In Chennai, Students can get very low fee structures and best training in Wiztech only.
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
Wiztech Automation provides best practical training in PLC, SCADA, DCS, Embedded, VLSI Training and Job Oriented industrial training. Here wiztech will place the candidates to its tie-up companies, who is trained in its advanced technical training.
VLSI Training with Placement in Wiztech In core industries there are more job opportunities but the Candidates still having placement problems. The reason is the lagging of practical knowledge in students to work in a very big plants and highly technical oriented process. If the candidates having the practical knowledge in technical process, companies are pick them with competition and they are ready to pay high scales. Students must understand this demand in core industry. If they ready to learn practical automation training with practical then they don't have placement issues thereafter. Automation technology is the heart of the industries. Mainly VLSI Automation for the electronics field. Wiztech Automation is the leading VLSI System automation training Centre in Chennai. Wiztech provides VLSI system Training in Chennai to train the students 100% practical manner and give them placement assistance. Here candidates can get free accommodation for the training period. So Wiztech Automation Solution is the best VLSI Training Institute in Chennai and it is also the Best Embedded system Training institute in Chennai and Depth & advanced VLSI Training institute in Chennai.
VLSI (Very Large Scale Integration) – Syllabus:*Digital Electronics, *VHDL, *VERI-Log, *FPGA Flow, *Simulation *FGPA Implementation.
Wiztech Training features and Advantages are:-
Individual Focus Flexible Timing for Training FREE Accommodation 100% Practical Training Live Training on Industrial Machineries Advanced Diploma Certification International certification Free Placement service Interview Training Soft skills Training Best Fee structure Friendly management Live Project Training Industrial professional faculties 100% Technical assistance IAO Certification for Training Project Handling Certification Handling 10 Industrial Projects Advanced industrial Lab setup
Unlimited Lab practices Scholarship & offers College & Group Concession
For FREE DEMO and Enquiry,Feel Free To Call US…
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
See our web & Live Chat with us@http://www.plctraininginchennai.nethttp://www. wiztechautomationsolutions.com http://www.industrialautomation.net.inhttp://www.scadatraining.net
Wiztech Provides 100% practical training in Industrial Automation Training like 10 Types of PLC, 3 Types of SCADA, DCS, HMI, VFD, Control Panel Training with International Certification and Free Accommodation and Placement service... You can work Live industrial projects and machineries here.
facutyWe are the service providers of many leading core companies. Our Faculties has been handled many industrial projects. So they can able to teach current industrial needs and problems and rectification of the industrial automation process and machineries.
>Training Advantages in wiztech ---> 6 lines >News And Updates -----> 6 news>Download Software>Student Desk » Training with Placement ----->content>Technical TutorialsVideo Gallery
Great Diwali OfferWiztech Announces Diwali Offer for Its Training Section. Click Here to avail this opportunity.
Free One day Workshop
Wiztech provide FREE one day workshop in industrial process for final year and Pre-final year students only.
FREE Demo ClassWiztech offers a FREE Demo class for all Engineering Candidates. Click Here to get appointment.
Wiztech in News papers Thanks to Dinathanthi for published our College Workshops in its edition.
Project Title DownloadNow you can Download your project domain Titles and Abstract in Wiztech site.
Live Chat for Enquires…You can Ask anything about Training, Project, Industrial service and your other doubts in Live Online Chat with us.
This is a Industrial Labeling Machine in Wiztech for the purpose of Train the candidates in industrial live process. This used for EEE Department students training, ECE Department students training, E&I Department students training, Mechanical Department students training, best training in automation training in wiztech.
Wiztech provides 100% practical training on industrial automation that provides the best training on industrial process and advanced technology training.
Wiztech-9940426826 helps the students on how to choose the best PLC training Institute in Chennai and also where they can acquire the best PLC training Course in Chennai. With major contribution of our PLC, SCADA, Embedded Training centre in Chennai, team creates the students according to the core industries standards. Our placement expert team has well experienced faculties to guide the students through providing the knowledge on how to clear and face the interviews. There are more PLC training Centers in Chennai , we are considered and recognized as the No. 1 PLC training Institute in Chennai. Our PLC training institute in Chennai offers the free accommodation for the outstation candidates and with this you could understand how we provide the Our PLC DCS training institute in Chennai has tie-ups with more clients to present the better benefits with at most care. We provide the great career to the students who received the training in our institute.
PLC Automation - The Heart of Core industry jobs
Wiztech Automation is the best PLC Automation practical training centre in Chennai. Wiztech provides also Embedded Training, SCADA Training, VLSI Training, I.T Training. Call us immediately and get the full information by attending a free industrial automation DEMO class.Call us@ 9940426826, 044-26209369.
Engineering fresher needs the best core industry job. But companies need the best industrial knowledge having person to work with industries. So here Wiztech act as a bridge with fresher and industrial professionals give training and placement.
PLC training Course in Chennai ( Call us @ 9940426826) is getting popular nowadays because of its tremendous growth. As we know that Chennai is well known for providing the best plc training and the only issue we face is the filtering the best one from number of training institute. Researchers analyzed that within few years, the growth of the automation industries will touch the peak and the opportunities in the automation industry will increase a lot. I hope that you have realized the importance of the PLC training course in chennai to attain the highest position in your life.
WIZTECH automation which is the best PLC training institute in Chennai, offering hundreds of candidates every day with the high class industrial training slots. In our training you get massive resource of information about industrial automation and its demand in industries.
Plc scada is attaining popularity soon and its growth now is tremendous. I hope within few years it will reach to peak, so students prepare yourself with plc automation training. Students who are in Chennai has great scope to learn plc scada training in Chennai because here you have different plc scada training centers that train you and also place you with good job. So once you are trained well in plc scada, then your career shines well. Let us see the benefit of learning plc scada training so that you can know about its uses and applications.
PLC – SCADA – DCS – Embedded – VLSI Training institute in Chennai – Wiztech - 9940426826Wiztech – 9940426826. PLC – SCADA – DCS is the best technology in electronics field. It is a grooming field in world technology. It consumes more job opportunity in industry. Wiztech is the best PLC – SCADA – DCS Training institute in Chennai Wiztech provides advanced diploma Automation training with international certification and 100% practical. Wiztech provides FREE Accommodation and free Placement service also. So if you want to do PLC, SCADA, DCS and Embedded, VLSI Training just enquire in Wiztech.The Syllabus of the Wiztech Automation Training institute is:
1. 10Types of PLC (Programmable Logic Controller)1. AB, 2.ABB, 3.Siemens, 4.Keyence, 5.GE-Fanuc, 6.Omran, 7.Delta, 8.messing, 9.Mitsubishi, 10.Schneider.
2. 3Types of SCADA (Supervisory Control And Data Acquisition) 1. Intellution FIX32/IFIX32, 2.Wonderware in-touch 10.0 3.EV-Designer.
3. DCS (Distributed Control System)4. VFD (Variable Frequency Drives)5. Control panels. 6. Embedded System
*Embedded ‘C’, *8051, *PIC, *ARM, *AVR, *RTOS, *VLSI. 7. VLSI (Very Large Scale Integration)
*Digital Electronics, *VHDL, *VERI-Log, *FPGA Flow, *Simulation *FGPA Implementation.
Wiztech Provides Above these Trainings with 100% Hand-on manner. In Chennai, Students can get very low fee structures and best training in Wiztech only.
Wiztech Automation Solutions pvt ltd.,Ph: +91 99404-26826, 044-26209369.102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.
Mail us:[email protected]:www.plctraininginchennai.net
Engineering training on PLC Automation & Embedded system programmingPLC Automation Training for engineering fresherWiztech automation solutions provide the best PLC training in Chennai. It is highly needed for engineering candidates and fresher.
You can get the Excellent training with industrial oriented training in Chennai also. Wiztech provides 100% practical training in PLC, SCADA, DCS, HMI, VFD automation training with free Accommodation and Free Placement also and you can get the Advanced diploma in Automation technology by IAO Certification.
Wiztech is the Best SCADA training centre in Chennai. Wiztech provides not only scada training also providing PLC, DCS, HMI, VFD, Control panel 100% practical training. You can get the industrial oriented projects, while you learning and you can work in industrial projects after the training. I will give the wiztech details below,
Wiztech Automation Solutions pvt ltd., Ph: +91 99404-26826, 044-26209369. 102, W-block, 2nd & 3rd floor, 2nd Avenue, Anna nagar roundana, Anna nagar, (Near Indian bank) Chennai – 600040. Tamilnadu.
Mail us:[email protected]
Web: www.plctraininginchennai.net Live Chat@ http://www.plctraininginchennai.net
Embedded system is the advanced technology of mini level automation process. It is the grooming field and it is the future of engineering candidates. Wiztech provides the Embedded system training in Chennai with free placement service. Wiztech is the best embedded system training institute in Chennai.
Embedded system is the advanced technology of industrial automation process and it is the grooming field. It consumes the major percentage of job vacancies in automation field. So Wiztech provides the practical training on embedded system, 8051, PIC, ARM, AVR, RTOS training with placement service.
Scada designing is changing the automation process industry. scada change this field of automation process into easy monitoring and flexible. It is needed to candidates and working professionals of core industrial automation process. So wiztech provides Scada training and PLC training in Chennai. It is more helpful to candidates, who have engineering backgrounds to get the best core industry job.
Questions:-Which is the best PLC training centre in Chennai?Wiztech - 9940426826. I know about this in http://www.plctraininginchennai.net. They provide 100% practical training on live industrial machineries and placement also. Is any other institute is providing these type of training really? My professor also suggested wiztech only.
Scada designing is the advanced technology training in PLC automation industry. Nowadays it is used in all industrial automation process. It is Reduce workers and accidents and increase the factory safety and time. So every engineer must to learn this to get a good job in core industry. Wiztech provides these training with practical and live industrial machineries. Wiztech is the best PLC training centre in Chennai, Scada training centre in Chennai.
Advanced Automation technology – PLC training in Chennai – plc scada training centre in Chennai PLC Training, SCADA training, DCS training is the needed technology to run a automation process in a core industry. We can’t imagine a automation process industry without PLC, SCADA and DCS and its sub technology. In world of automation PLC is the heart of industrial process automation. Engineering candidates must have the knowledge of these of the advanced technology to work in core industry. Wiztech clearly understood the industrial need from engineering candidates and engineering candidate problems to get the job in industry. So here wiztech act as a bridge by providing advanced technology training to engineering candidates with 100% practical training on real time industrial machineries and industrial projects and send these qualified automation engineers, who trained by wiztech to its tie up core companies. So this PLC training in wiztech is more useful for engineering candidates to get the best industrial job and can work easily on any industrial project with industrial knowledge, which is provided by wiztech automation in Chennai. So Wiztech is the best PLC training centre in Chennai.
The Syllabus of the Wiztech Automation Training institute is:
1. 10Types of PLC (Programmable Logic Controller)1. AB, 2.ABB, 3.Siemens, 4.Keyence, 5.GE-Fanuc, 6.Omran, 7.Delta, 8.messing, 9.Mitsubishi, 10.Schneider.
2. 3Types of SCADA (Supervisory Control And Data Acquisition) 1. Intellution FIX32/IFIX32, 2.Wonderware in-touch 10.0 3.EV-Designer.
3. DCS (Distributed Control System)4. VFD (Variable Frequency Drives)5. Control panels. 6. Embedded System
*Embedded ‘C’, *8051, *PIC, *ARM, *AVR, *RTOS, *VLSI. 7. VLSI (Very Large Scale Integration)
*Digital Electronics, *VHDL, *VERI-Log, *FPGA Flow, *Simulation *FGPA Implementation.
Wiztech Provides Above these Trainings with 100% Hand-on manner. In Chennai, Students can get very low fee structures and best training in Wiztech only.
Wiztech Training features and Advantages are:-
Individual Focus Flexible Timing for Training FREE Accommodation 100% Practical Training Live Training on Industrial Machineries Advanced Diploma Certification International certification Free Placement service
Interview Training Soft skills Training Best Fee structure Friendly management Live Project Training Industrial professional faculties 100% Technical assistance IAO Certification for Training Project Handling Certification Handling 10 Industrial Projects Advanced industrial Lab setup Unlimited Lab practices Scholarship & offers College & Group Concession FREE DEMO and Enquiry,
For Enquiry Contact us@Wiztech Automation Solutions pvt ltd.,102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
For Free Demo fell free to call us@Ph: +91 99404-26826, 044-26209369
For Live Chat visit us@Webiste:http://www.plctraininginchennai.nethttp://www.industrialautomation.net.inhttp://www.scadatraining.net
PLC Embedded training are the best innovation of advanced modern technology. Nowadays we can’t imagine automation technology without PLC and Embedded. Wiztech Automation provides these practical training to engineering candidates.
PLC automation training is needed for PLC automation process in industries. Engineers who want to be work in core industry; they need to get training on PLC and scada training.
PROCESS AUTOMATION TRAINING IN CHENNAIProcess automation is used by world widely in all core industry for easy the method of production, product accuracy, reduction of employees and increase the quantity of product. Advanced Technology’s advancements in process automation in monitoring, control and industrial automation over the past have contributed greatly to improvise the accuracy, productivity, reduce the man power of all manufacturing industries throughout the world.
In Wiztech Automation engineers are trained practically on automatically control processes in various industries such as oil refineries, chemical industries. Process automation replaces the need for manual operators. Wiztech is the process automation training centre in Chennai. Its giving practical knowledge to candidates. Major percentage of global production is still controlled by process automation, almost all the controls installed as a part of a new plant or plant expansion are Digital Control Systems DCS connected by digital networks.
Nowadays, anyone can access the data, anywhere through the laptop or computer by internet to displays and intelligence that anywhere on the DCS network. This can achieved by innovation of advanced technology and its human understanding and utilization and combination of self-tuning, self-diagnosing and optimizing features of modern process control, DCS training, DCS training in Chennai, PLC training in Chennai, scada training in Chennai.
Engineering students, Engineers, working professionals can get the full knowledge with practical experience in process automation and control system in Wiztech Automation at Annanagar. Wiztech train the candidates all topics related to Process Automation and Control, like Distributed Control Systems DCS, Programmable Logic Controller - PLC, Batch Control, Validation, Foundation Field-bus, Profi-bus, AS-Interface, Device Net, PID, Advanced Control, Measurement, Human Machine Interface HMI, OLE for Process Control OPC, Supervisory Control And Data Acquisition – SCADA, Measurement, Process Instrumentation. So students in Wiztech can clearly understand the technology of process automation in industrial process unit.
For Enquiry Contact us@Wiztech Automation Solutions pvt ltd.,102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.
Tamilnadu.Mail us:[email protected]
For Free Demo fell free to call us@Ph: +91 99404-26826, 044-26209369
For Live Chat visit us@Webiste:http://www.plctraininginchennai.nethttp://www.industrialautomation.net.inhttp://www.scadatraining.net
Wiztech provides the best PLC training on PLC, SCADA, DCS, HMI, VFD, Control panel, Embedded, VLSI with industrial oriented machinery training in live industrial machineries.
Final Year IEEE ProjectsWiztech provides the best guidance for final year IEEE projects with practical lab practice. Engineering Final year students refer the below projects and get full details projects & enquiry Click Here….
Chennai’s best PLC Training centre in ChennaiChennai is famous for all technologies all
Wiztech is the best plc training institute in ChennaiIndustry needs engineers who finished PLC training in Best PLC training Centre in Chennai Industry needs engineers who finished PLC Training they highly needed in Chennai. Chennai and its outer areas become a industrial city, many industries and companies starting their new branches in Chennai, even MNCs also focusing Chennai only. These companies need more engineers to run their plant. These engineers must had the knowledge of PLC, scada, dcs, hmi, vfd and control panel. So who finished PLC Training, Scada training, DCS training, HMI training, VFD training and Control panel training, Specially who finished the PLC training in Chennai. PLC training in Chennai by wiztech provides the 100% practical oriented knowledge and live Industrial machineries lab training. Wiztech frame advanced automation technology syllabus and practical and industrial oriented machinery training for fulfill the industrial needs from students. These
methods of training by wiztech helps the students to get job in core job easily and they can work any industrial project with the help of the training from wiztech automation in Chennai, Anna nagar. Wiztech provides the best PLC training in Chennai. So Wiztech is the Best PLC Training Centre in Chennai
Wiztech also provides the more offers for student convenience and encourage students to get the practical training and improve their industrial experience and work high end technical project in core industry. We can’t imagine the world without automation field. Nowadays everything is changed to automation. And in automation their using advanced technologies, so engineers wants to improve their knowledge before going to automation field. Are you finding the best automation training centre in Chennai, Stop the search and ask to wiztech for the advanced automation field entry card. Yes wiztech provides the training which you want exactly to become a advanced engineer with industrial automation practical experience of advanced automation process & projects. This the right time to get automation training to get the best place in advanced industrial race.
Wiztech have more advantages compare to other PLC Training Institutes in Chennai. Wiztech Special practical syllabus, Advantages and features are listed below,
Syllabus of the Wiztech Automation Training institute is:
10Types of PLC (Programmable Logic Controller)1. AB, 2. ABB, 3. Siemens,4. Keyence, 5. GE-Fanuc, 6. Omran, 7. Delta, 8. messing, 9. Mitsubishi, 10. Schneider.
3Types of SCADA (Supervisory Control And Data Acquisition) 1. Intellution FIX32/IFIX32,
2. Wonderware in-touch 10.0 3. EV-Designer.4. Kings View
DCS (Distributed Control System)
VFD (Variable Frequency Drives)
Control panels.
Wiztech Provides Above these Trainings with 100% Hand-on manner. In Chennai, Students can get very low fee structures and best training in Wiztech only.
Wiztech Training features and Advantages are:-
Individual Focus Flexible Timing for Training FREE Accommodation 100% Practical Training Live Training on Industrial Machineries Advanced Diploma Certification International certification Free Placement service Interview Training Soft skills Training Best Fee structure Friendly management Live Project Training Industrial professional faculties 100% Technical assistance IAO Certification for Training Project Handling Certification Handling 10 Industrial Projects Advanced industrial Lab setup Unlimited Lab practices Scholarship & offers College & Group Concession FREE DEMO and Enquiry,
For Enquiry Contact us@Wiztech Automation Solutions pvt ltd.,102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
For Free Demo fell free to call us@Ph: +91 99404-26826, 044-26209369
For Live Chat visit us@Webiste:
http://www.plctraininginchennai.nethttp://www.industrialautomation.net.inhttp://www.scadatraining.net
SCADA Designing - SCADA training in ChennaiSCADA (Supervisory Control And Data Acquisition) Design is the Advanced technology of industrial automation process, Which is provide the highly flexible controlling and safety to the dangerous and huge industrial processes in automation industry. Using the SCADA system we can able to design the whole automation process unit and its controlling unit in our local system screen, after that we just interface the controlling modules into our scada design screen into the particular I/O’s using interfacing cables. Now the magic is over. Then we can able to monitor the process and control the automation process in our system screen just operating the mouse and screen. But engineering candidates have to get training on PLC software and SCADA design software clearly for designing and operating this praocess. There are lot of scada software are in market but we have to get the knowledge in Major brands of software, Which are mostly using in industries.
Which is the best scada training institute in Chennai? SCADA and PLC technologies are having more job vacancies in industrial automation field. If engineering candidate wants to find best scada training institute in Chennai means, we have to check some features, which are all the qualities are scada training and plc training institutes should have. Many PLC and scada training centers are there in Chennai. But If it is best scada training centre it should have below features like Individual focus on training so only we can learn clearly and will provide flexible Timing for Training, 100% Practical Training, Live Training on Industrial Machineries, Live Project Training in scada system, Industrial professional faculties with years of experience, 100% Technical assistance in scada training and PLC training, Unlimited Lab practices in PLC and scada training, Interview Training Soft skills Training, Best fee structure for training in PLC SCADA in Chennai, Friendly management will only give guidance to your career, Certification is more important for getting a training, institutes must give IAO – International certification for that we can apply abroad job also and scada certification for Training, scada project handling certification, at least we have to handle 10 Industrial Projects, after completing training, Advanced industrial Lab setup, Advanced Diploma Certification, if institute provides Free Placement service it is a additional advantage to candidates, College & Group concession, Scholarship & offers is more useful for college students, If FREE Accommodation also provides by plc scada training institute means, we don’t want faces any accommodation problems in out of city and out of station, They also provide FREE DEMO class means we can get prior knowledge about our PLC SCADA training
institute’s teaching style and training manner in the best PLC scada training institute in Chennai.
Do you have above knowledge about qualities of best plc scada training institute in Chennai? Do you think it is not possible to find the plc scada training institute / centre in Chennai like this? Don’t Worry here you got your best PLC Training institute and scada training institute in Chennai. Yes, Wiztech provides the best PLC Training in Chennai, Scada training in Chennai, DCS Training in Chennai, and Embedded Training in Chennai, VLSI Training in Chennai, IT training in Chennai with Above all qualities of best PLC SCADA training centre in Chennai. Students who are all need the Best Scada training along with PLC Training in Chennai they can contact the Wiztech automation, which is the best PLC Training and SCADA training centre in Chennai, and get the full knowledge and practical experience of plc scada designing training and job in wiztech’s tie-up companies by using the wiztech placement service.
For Enquiry Contact us@Wiztech Automation Solutions pvt ltd.,102, W-block, 2nd & 3rd floor, 2nd Avenue,Anna nagar roundana,Anna nagar,(Near Indian bank)Chennai – 600040.Tamilnadu.Mail us:[email protected]
For Free Demo fell free to call us@Ph: +91 99404-26826, 044-26209369
For Live Chat visit us@Webiste:http://www.plctraininginchennai.nethttp://www.industrialautomation.net.inhttp://www.scadatraining.net
Wiztech is the Best PLC Training Centre in Chennai offers Best PLC Scada DCS training
Wiztech is the best PLC training Centre in Chennai, Wiztech provides advanced training on PLC Scada DCS VFD HMI, Control panel automation training with advanced industrial live training
Wiztech offers the best PLC training and SCADA training on PLC training centre in Chennai. we provide the best practical experience in industrial oriented training on
process automation. Engineering candidates needs this training to get the best core industry jobs. Industries needs the experience from the engineering candidates. But freshers, who came out just before from engineering colleges having limited knowledge and without industrial experience. So these candidates struggles in industries to prove them. So if engineers can get automation training with practical experience in live industrial projects means, they can easily get the best core jobs and prove their project oriented knowledge in their career of industrial works. Wiztech provides these types of industrial experience to engineering fresher and working professionals too. Wiztech provides best industrial oriented practical PLC training, Scada training, dcs training, VFD training, HMI, Training, Embedded training, VLSI training, IT training in Chennai with advanced diploma IAO (International Accreditation Certification) certification with free placement service in their tie-up core companies. In Chennai lot PLC automation training Centres are there, but wiztech only provides the best practical oriented training and industrial exposure to students, industrial process handling, live project handling, Industrial oriented machinery process handling in automation field. Apart from these wiztech give more moral support to engineering candidates such as providing soft skill training, free placement service, placement guidance, unlimited practical labs, lab training on after finished the training also, provides attention to every students capacity to improve them technically as customized process, giving the best support to students, keeping the friendly relationship to engineering candidates. These qualities has been keep the unique place in a automation training industry and PLC automation training institute in Chennai and in India. So only Wiztech
Shopclues damaging its name by sending like these products. Its not a reebok watch. the strap holding metal is flexible to bend and its damaged and also it is not the watch what I ordered. you didn't tell colour and model as per availability. then why are you changing this product as cheapest low quality damaged product. This is a big cheating. I need my money and pls retake your dustbin product.
