Chemical Protection

Chemical Protection

Tel.: +49(0)7234 - 9 48 59-0 • www.tesimax.de

Chemical Protection

P. 40 P. 41Tel.: +49(0)7234 - 9 48 59-0 • www.tesimax.de

Suit description, GS 3 & GS 3 M series

• One-piece complete chemical/fi re brigade protection suit (CPS) with replaceable visor.

• The protection suits (CPS) of this series have been tested or certifi ed to DIN EN 943 Part 1 or (partly) to DIN EN 943 Part 2 (emergency teams (ET), for unrestricted use in fi re brigades) according to Directive 89/686/EEC.

• Type 1b = gas-tight. chemical protection suit with breathing air supply worn outside the chemical protection suit, for example compressed air equipment for example compressed air equipment.

• All popular fi refi ghter helmets and industrial hard hats can be worn over the suit. We recommend a helmet to DIN EN 397 for industrial hard hats and EN 12492 for mountaineering helmets (see extras).

Standard equipment, GS 3 series

One-piece protective suit with form rubber seal in the hood for secure fi t under full-face masks.This CPS unites excellent quality with high-grade materials.The wide face cutout is surrounded with a special seal made from BUTYL® that allows the use of all popular full-face masks.

Five-fi nger exchangeable chemical protection gloves with the TESIMAX exchange system are fi tted (standard: Size 10). Inner or overgloves are not generally required. For models and possible alternatives see the model description.

- FIREMAN SA/BF safety boots, size 46, certifi ed to DIN EN 15090, DIN EN ISO 20345 and DIN EN 13832-3 are exchangeable (TESIMAX® replacement system). For other sizes (43–47) see Extras.

- Some hazmat suit models are equipped with PRISMA safety boots to DIN EN 344 and DIN EN 345 (see models). These boots are resistant against chemicals such as oils and grease.

- The 130 cm long, gas- and liquid-tight zip is fi tted horizontally across the back. and is protected with a labyrinth cover and closes from left to right.

- The suit features one safety (exhalation) valves with an additional splash cover made from suit fabric.

- All hazmat suits of this series are prepared for later installation of an external F-AU 4 series forced ventilation system for internal ventilation (see Extras).

- The suit is supplied in a black, tear-resistant storage bag for fl at storage. For other bags Extras.

Standard equipment, GS 3 M series

- As for GS 3 but with permanently built-in mask. A choice of several tested full-face masks of various makes is available. Contact TESIMAX® for further information. The mask is included in the price.

- The standard normal-pressure version of the GS 3 M CPS has an EPDM full-face mask (for fi re brigades) or a full-face mask made from technical rubber (for industry use).

- For further tested full-face mask versions see Extras.

For further equipment, see “Extras for GS 3 series”.

!

+

Can be combined with various full-face masks, for example TR 2002 CL 2

The universal glove – WIPAN C/CK

FIREMAN SA/BF

®

Chemical Protection


Chemical Protection


Material description, GS 3/GS 3 M POLYRAN-L®

• Base fabric coated on both sides with POLYRAN, very light-weight and fl exible• Reusable, washable, excellent mechanical properties (tear-, abrasion- and perforation-resistant)• Excellent chemicals resistance to most acids and alkalis• Applications: In industry or as training suit for fi re brigades• Colour: Yellow or red (optional)• Approval: DIN EN 943 Part 1 –1b (industry) Ex-area zone 0, DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS• Weight (4 kg without extras)• Service life: Up to 15 year according to manufacturer’s guideline• Protective gloves: Telblue in sizes 9 to 10 (please specify when ordering) Alternatives: Neotex, Temp-Cook, Alpha Tec (please specify when ordering)• Boot size: 42 to 47 (please specify when ordering) PRISMA safety boots to DIN EN 344 and DIN EN 345

Ordering data• Sizes 160 to 175 cm, order no.: 0222-151 M• Sizes 170 to 185 cm, order no.: 0222-151 L• Sizes 180 to 190 cm, order no.: 0222-151 XL (standard)• Sizes 190 to 200 cm, order no.: 0222GS 3 M SYKAN® -151:Ordering data GS 3 M• Size 160 to 175 cm, order no.: 0223-151 M• Size 170 to 185 cm, order no.: 0223-151 L• Size 180 to 190 cm, order no.: 0223-151 XL (standard)• Size 190 to 200 cm, order no.: 0223-151 XXL

Property rating, GS 3/GS 3 M POLYRAN-L®

Chemical resistance*

Mechanical resistance*

Heat**: Contact heat at about 850 ± 50 °C

Heat**: Hot vapour at about 350 °C

Heat**: Radiated heat at about 1000 °C Not tested

Cold**: Contact cold at –30 °C

Cold**: Contact cold at –80 °C Not tested


*/** For classifi cation of chemical and mechanical resistance and thermal properties, see page 02

Material description, GS 3/ GS 3 M SYKAN® 1

• SYKAN® 1 consists of a polyamide base fabric coated with a high- performance CR elastomer (yellow colour) and with a chemically and physically resistant MCPM inner layer.• Good resistance against heat, ageing, weather and ozone• Good oil resistance; good physical properties and elasticity• Applications: Industrial use• Colour: Yellow• Approval: DIN EN 943 Part 1 –1b (industry) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2• Weight (4 kg without extras)• Service life: Up to 15 year according to manufacturer’s guideline• Protective gloves: Neotex in sizes 9 to 10 (please specify when ordering) Alternatives: Wipan C, Temp-Cook, Alpha Tec (please specify when ordering)• Boot size: 42 to 47 (please specify when ordering) PRISMA safety boots to DIN EN 344 and DIN EN 345

Ordering data, GS 3 (without respirator mask)• Sizes 160 to 175 cm, order no.: 0222-215 M• Sizes 170 to 185 cm, order no.: 0222-215 L• Sizes 180 to 190 cm, order no.: 0222-215 XL (standard)• Sizes 190 to 200 cm, order no.: 0222-215 XXLOrdering data, GS 3 M• Size 160 to 175 cm, order no.: 0223-215 M• Size 170 to 185 cm, order no.: 0223-215 L• Size 180 to 190 cm, order no.: 0223-215 XL (standard)• Size 190 to 200 cm, order no.: 0223-215 XXL

Property rating, VS 20 SYKAN® 1










®

®

Chemical Protection


Chemical Protection


Material description, GS 3/GS 3 M SYKAN® 2

• SYKAN® 2 consists of a polyamide base fabric coated with a high- performance FPM elastomer (orange colour) and with a chemically and physically resistant MCPM inner layer.• Outstanding weathering, ageing and ozone resistance• Excellent chemicals resistance; low gas permeability (also against war gasses)• Applications: In industry or for fi re brigades (unlimited)• Colour: Orange• Approval: DIN EN 943 Part 2 (ET) – 1b (industry & fi re brigades) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS, MED• Weight (4 kg without extras)• Service life: Up to 15 year according to manufacturer’s guideline• Protective gloves: WIPAN C in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK, Temp-Cook, Butofl ex (please specify when ordering)• Boot size: 42 to 47 (please specify when ordering)

Ordering data, GS 3• Size 160 to 175 cm, order no.: 0222-212 M• Size 170 to 185 cm, order no.: 0222-212 L• Size 180 to 190 cm, order no.: 0222-212 XL (standard)• Size 190 to 200 cm, order no.: 0222-212 XXLOrdering data, GS 3 M• Size 160 to 175 cm, order no.: 0223-212 M• Size 170 to 185 cm, order no.: 0223-212 L• Size 180 to 190 cm, order no.: 0223-212 XL (standard)• Size 190 to 200 cm, order no.: 0223-212 XXL

Property rating, GS 3/GS 3 M SYKAN® 2










®


• SYKAN® 4 consists of a 100 percent Kevlar base fabric coated with a high-performance FPM elastomer (orange colour) and with a chemically and physically resistant MCPM inner layer.• Very good heat-resistance; outstanding weathering, ageing and ozone resistance• Excellent chemicals resistance; low gas permeability (also against war gasses)• Applications: In industry or for fi re brigades (unlimited)• Colour: Orange• Approval: DIN EN 943 Part 2 (ET) – 1a (industry & fi re brigades) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, MED• Weight (6 kg without extras)• Service life: Up to 15 year according to manufacturer’s guideline• Protective gloves: WIPAN CK in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN C, Butofl ex (please specify when ordering)• Boot size: 42 to 47 (please specify when ordering)


Property rating, GS 3/GS 3 M SYKAN® 4










®

Chemical Protection


Chemical Protection



• SYKAN® 5 consists of a polyamide base fabric coated on both sides with a high- performance CPM elastomer (yellow colour) and featuring an outstanding chem-stop barrier.• Reusable, washable, excellent mechanical properties (tear-, abrasion- and perforation-resistant)• Outstanding chemicals resistance (for more than 8 hours against all 15 reference chemicals to DIN EN 943-2); low gas permeability (also against war gasses)• Good ageing, weathering and ozone resistance; low air permeability• Applications: In industry or for fi re brigades (unlimited)• Colour: Yellow• Approval: DIN EN 943 Part 2 (ET) – 1b (industry & fi re brigades) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS (MED available soon)• Weight (4 kg without extras)• Service life: Up to 15 year according to manufacturer’s guideline• Protective gloves: WIPAN C in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK, Butofl ex (please specify when ordering)• Boot size: 42 to 47 (please specify when ordering)


Property rating, VS 5 SYKAN® 5










EXTRAS FOR GS 3 SERIES CPS

- Forced air supply F-AU 4 for ventilation with regulating valve 0250-022 Tip: Ideally matched respiratory protection equipment for the CPS- Adapter hose, Flat-Face to Euro coupling 0250-023

Full-face masks for the GS 3/GS 3 M series with screw thread to DIN EN 148-1:- Full-face mask TR2002 CL2, normal pressure, industry, technical rubber, blue 0700-066- Full-face mask TR2002 CL3, normal pressure, industry, silicone, yellow 0700-065- Full-face mask TR2002 CL3, normal pressure, fi re brigade, EPDM, black 0700-064- Full-face mask TR2002 CL3, gauge or normal pressure / optionally with ESA connector, fi re brigade, EPDM, black 0700-063 On request, we also supply other masks of various brands. Ideally matched respiratory protection equipment for the CPS

- 5-fi nger WIPAN-CK gloves 2509-002- 5-fi nger WIPAN C gloves 2509-001- 5-fi nger BUTOFLEX gloves 2507-650- 5-fi nger NEOTEX gloves 2507-350- 5-fi nger ALPHA-TEC gloves 2504-530- 5-fi nger TEMP-COOK gloves 2507-476- 5-fi nger TELBLUE gloves 2504-412

- Direct print: In the chest/back area Please enquire In the sleeve/visor area Please enquire

- Self-adhesive numbers: In the chest/back area (200 mm) 0372-002 In the sleeve/visor area (45 mm) 0372-001 For frequent use we recommend the self-adhesive numbers (black, rounded)

- Undersuits, GATEX 0650-229- Undersuits, thermal fl eece 0650-228

- Breathing underwear FALKE (CLIMA BALANCE SYSTEM) For advice and further information, contact us.- Breathing underwear BLUE COOLMAX (CLIMA BALANCE SYSTEM) Colour: Dark blue (for other colours please enquire) Order no.: Leggings (without fl y) 0628-003 Order no.: Long-sleeve vest 0628-004- Breathing underwear BLACK HEAT (CLIMA BALANCE SYSTEM) Order no.: Leggings (without fl y) 0628-001 Order no.: Long-sleeve vest 0628-002

- Textile storage bag- Standard-carry bag, black (2100 × 600 × 120 mm) 0191-006- Compact version (400 × 400 × 700 mm) 0191-001- For fl at storage, made from resilient PVC, red (2100 × 600 × 120 mm) 0191-003- For suspended storage, made from resilient PVC, red (2100 × 600 × 120 mm) 0192-000

For further information about our products, see this catalogue or the corresponding product instruc-tions, or call us.

+

Documents

Chemical Protection