Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
*23044128_0816*Drive Technology \ Drive Automation \ System Integration \ Services
Data Sheet
Functional SafetyCharacteristic Safety Values for MOVIFIT® FC/MC with S12Safety Option
Edition 08/2016 23044128/EN
1 Data SheetSafety characteristic values MOVIFIT® FC/MC with S12 safety option
Data Sheet – Characteristic Safety Values for MOVIFIT® FC/MC with S12 Safety Option2
1 Data Sheet
INFORMATIONThis data sheet does not replace the following documents1) :• "MOVIFIT® FC" operating instructions• "MOVIFIT® MC" operating instructions• "MOVIFIT® FC/MC – Functional Safety with S12 Safety Option" manual
1) We reserve the right to make technical changes
1.1 Safety characteristic values MOVIFIT® FC/MC with S12 safety optionSafetycharacteristic valuesMOVIFIT®FC/MC withS12 safetyoption
1.1.1 Overall component: S12 safety optionThe tables below show the safety characteristics of the overall component.
Designation Characteristic safety values according toIEC 62061 / IEC
61508EN ISO 13849-1
Classification SIL 21) PL d
System structure HFT = 0 Category 2
Operating mode selection High demand –
Probability of dangerous failure perhour(PFHd value)
< 1.5 x 10-8 1/h < 1.5 x 10-8 1/h
Mission time / service life 20 years
Proof test interval Not required –
Safe state • PROFIsafe: Logic value "0" for all safety-related process values
• Safety-related F-DO outputs: Outputs de-activated (logic "0")2)
Safety functions • STO, SS1, SLS, SDI (according toEN 61800-5-2)
• Safety-related digital inputs and outputs• PROFIsafe communication
1) The S12 safety option is a subsystem of type B according to IEC 61508.2) When a safety-related output is used to control the STO function of the inverter, the function is activated
in a safe state.
2304
4128
/EN
– 0
8/20
16
1Data SheetSafety characteristic values MOVIFIT® FC/MC with S12 safety option
Data Sheet – Characteristic Safety Values for MOVIFIT® FC/MC with S12 Safety Option 3
1.1.2 Extended safety class for safety-related digital inputs and outputsThe following tables show the safety characteristics for safety-related digital inputsand outputs.
Designation Characteristic safety values according toIEC 62061 / IEC
61508EN ISO 13849-1
• Safety-related inputs• Safety-related outputs (sourcing/
sinking)• PROFIsafe
Classification SIL 3 PL e
System structure HFT = 1 2 channels(corresponds to cat-
egory 3)
Probability of dangerous failure perhour(PFHd value)
< 1 x 10-9 1/h < 1 x 10-9 1/h
Designation Characteristic safety values according toIEC 62061 / IEC
61508EN ISO 13849-1
• Safety-related outputs (sourcing/sinking)
• PROFIsafe
Classification SIL 3 PL e
System structure HFT = 1 2 channels(corresponds to cat-
egory 3)
Probability of dangerous failure perhour(PFHd value)
< 4 x 10-9 1/h < 4 x 10-9 1/h
2304
4128
/EN
– 0
8/20
16
SEW-EURODRIVE—Driving the world
SEW-EURODRIVE GmbH & Co KGP.O. Box 302376642 BRUCHSALGERMANYPhone +49 7251 75-0Fax +49 7251 [email protected]