Upload
michelle-silva
View
222
Download
1
Tags:
Embed Size (px)
Citation preview
Chapter 8, Section 1
Erosion Process that wears away surface materials and moves them from one place to another.
Erosion only occurs when the eroding agent has enough energy to move sediments.
Eroded sediments are not lost, but simply recycled.
What wears away sediments?
Agents of erosion: Gravity
Force of attraction that pulls objects towards the center of the Earth.
The greater the mass of an object, the greater its gravitational pull.
Water Wind Glaciers
Dropping Sediments
Deposition Dropping of sediments by eroding
agents when they lose energy.
Mass movement
Any type of erosion that happens when gravity moves materials downslope.
Can be very slow or very quick. Usually occurs on steep slopes and after
heavy rains. Water adds mass and creates a fluid
pressure between the grains and layers of sediment causing the sediment to expand and weaken.
Examples: Slump Creep Rockfalls Rock slides Mud flows
Slump Occurs when a mass of material slips down along a curved surface.
Leaves a curved scar where the slumped material originated.
Often occurs when: The slope becomes so steep that the
base material cannot support the material above it.
The base material is weaker than the material above it (ex. clay)
Water moves to the base of a slipping mass of sediment.
Creep Occurs when sediments slowly shift their positions downhill.
Common in areas of freezing and thawing.
Causes structures and trees to “lean” uphill.
Rockfalls Occur when blocks of rock break loose from a steep slope and tumble through the air.
As the rocks move down the slope, they break other rocks loose.
Rock Slides Occur when layers of rock slip downslope suddenly.
Commonly occur on steep slopes in mountainous areas or areas with steep cliffs.
Happen most often after heavy rains or earthquakes.
Mudflows Occur when heavy rains mix with sediment causing the sediment to become thick and pasty and then move downhill under the force of gravity. The materials of the mudflow are
deposited at the base of the slope…often in a fan shape.
Usually occur in areas that have thick layers of loose sediments.
Often happen after vegetation has been removed by fire.
Building on Steep Slopes
Building on slopes can speed up erosion by making the slope steeper or removing vegetation.
Making Steep Slopes Safe
Plant vegetation to anchor the soil and absorb water.
Use drainage pipes or ceramic tiles inserted in slopes to prevent the build up of water.
Use walls of concrete or boulders to hold soil in place.