Upload
matana
View
39
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Chapter 5 Creating Basic Features. Features covered. Extrude Boss/Base Feature Extruded Cut Feature Revolve Boss/Base Feature Revolved Cut Feature Rib Feature Fillet, FilletXpert , Chamfer Sketch Text Dome Feature. Extrude Boss/Base Feature. Where to start the extrusion . - PowerPoint PPT Presentation
Citation preview
Chapter 5Creating Basic Features
1
Features covered• Extrude Boss/Base Feature• Extruded Cut Feature• Revolve Boss/Base Feature• Revolved Cut Feature• Rib Feature• Fillet, FilletXpert, Chamfer• Sketch Text• Dome Feature
2
Extrude Boss/Base Feature
3
4
Where to start the extrusion
Where to end the extrusion
Can extrude in a second direction
Can extrude from a thin feature or a contour
Add a draft to the part
Can choose the angle of extrusion
From• Sketch Plane
– The plane of the sketch• Surface/Face/Plane
– Can choose any face• Vertex
– Can choose a point for reference to start
• Offset– Can enter a quantity to offset from
surface 5
Direction 1/Direction 2• Blind
• Extrudes a specified distance• Through All
• Goes through all bodies• Up To Next
• Extrudes to the nearest feature• Up to Vertex
• Up to a specified point• Up to Surface
• Can choose a surface to extrude to• Offset from Surface
• Can set a distance from a selected surface
• Up to Body• Similar to surface, but can choose a whole object (body)
• Midplane• Extrude in two directions with the current plane set as center
6
Draft• You can use a draft to add an angle
to the extrusion
7
Contours vs. Thin Feature• 2 Contours
• 3 Contours
• Thin Feature
8
Thin Feature• One direction• Midplane• Two-direction
– Sets the thickness of the extruded feature
9
Extrude Cut Feature
• All options are similar to extruded boss/base
10
Revolve Boss/Base Feature
11
12
Axis of revolution
Where to end the extrusion
Can extrude in a second direction
Can revolve from a thin feature or a contour
Revolve Cut Feature
13
Rib Feature
• 1st make a new plane• Make either an open or closed
sketch
14
Fillet/FilletXpert
15
Fillet Types• Constant Radius
– Entire fillet has a constant radius• Variable Radius
– Radius varies• Face fillet• Full round fillet
– Rounds off bosses or ribs
16
Chamfer
17
Dome Feature
18
19
20
21
22