Upload
athief-veteran
View
220
Download
0
Embed Size (px)
Citation preview
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
1/15
Econ 101: Principles of Microeconomics
Chapter 12 - Behind the Supply Curve - Inputs and Costs
Fall2010
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 1 / 30
Outline
1 The Production Function
2 Marginal Cost and Average Cost
3 Short-Run versus Long-Run Costs
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 2 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
2/15
Overview
In this chapter we turn our attention to the firm.
Afirmis an organization that produces goods or services for sale.
We will begin by characterizing the relationship between the firmsinputs and the quantity of outputs it produces.
Theproduction functiondescribes the relationship between thequantity of inputs and the quantity of outputs that the firm produces.
Basic characteristics of the production function has implications forthe cost structure for the firm, which in turn has implications for thefirm ultimate supply function.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 3 / 30
The Production Function
The Short Run and the Long Run
It is useful to categorize firms decisions into
- Long-run decisionsinvolves a time horizon long enough for a firm tovary all of its inputs
- Short-run decisionsinvolves any time horizon over which at least oneof the firms inputs cannot be varied
To guide the firm over the next several years, manager must use thelong-run view
To determine what the firm should do next week, the short run viewis best.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 4 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
3/15
The Production Function
Production in the Short Run
In the short-run, the firms inputs can be divided into one of twocategories
1 Fixed inputs
- These are inputs whose quantity is constant for some period of time
(regardless of how much output is produced).- Typically, fixed inputs will include land and machinery, though they can
also include certain types of labor (due to contracts).
2 Variable inputs
- These are inputs whose quantity the firm can vary, even in the shortrun.
- Examples of variable inputs often include labor, energy, fuel, etc.
When firms make short-run decisions, there is nothing they can doabout their fixed inputs; i.e., they are stuck with whatever quantity
they have.However, they can make choices about their variable inputs.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 5 / 30
The Production Function
Total Product
To fix ideas, suppose we have a firm whose only variable input is labor
All other inputs (capital, land, raw materials, etc.) we will assume fornow are fixed.
Total productis the maximum quantity of output that can beproduced from a given combination of inputs.
Thetotal product curveshows how the quantity of output depends onthe quantity of variable input, for a given quantity of the fixed input.
We would generally expect the total product curve to be increasing;i.e., as the quantity of the variable input increases, we would expecttotal output to increase.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 6 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
4/15
The Production Function
Consider Johns Woodworking Shop Again
Units of Labor Total Product0 01 102 353 804 1605 1936 2187 2398 257
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 7 / 30
The Production Function
The Total Product Curve
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 8 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
5/15
The Production Function
Marginal Product
Notice that the Total Product curve is always increasing in this case,but that its slope is not the same throughout.
- Initial the slope is increasing- but eventually it starts to flatten out.
The slope of the Total Product Curve is theMarginal Productoflabor.
Formally,
Marginal Product of Labor (MPL) = Change in Quantity of Output
Change in Quantity of Labor
= Q
L
Tells us the rise in output produced when one more worker is hired
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 9 / 30
The Production Function
Units of Labor Total Product Marginal Product0 010
1 1025
2 3545
3 8080
4 160
335 193
256 218
217 239
188 257
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 10 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
6/15
The Production Function
The Marginal Product Curve
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 11 / 30
The Production Function
Marginal Returns To Labor
As more and more workers are hired, the MPL is at first increasing
- This is known asincreasing returns to labor- This is typically due to the returns to specialization- It can also arise due to minimum labor requirements for equipment.
Eventually, however, the MPL starts to decline
- This is known asdiminishing returns to labor
- This arises as the gains from specialization are exhausted and- The constraints caused by the fixed inputs start to bind
This pattern of MPL (and for other inputs) is thought to hold formost industries.
Consider the problem of a woodworking shop.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 12 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
7/15
Marginal Cost and Average Cost
Production and Firm Costs
Understanding the nature of a firms production function is importantin that it has implications for the firms costs.
In the short run, the firms costs can be divided into two broadcategories:
1 Total Fixed costs (TFC): These are costs that do not depend upon thequantity of output produced.
- These costs are typically associated with fixed inputs.- Examples of fixed costs might be the rent paid for the firms building or
equipment rentals.
2 Total Variable costs (TVC): These are costs that depend on thequantity output produced.
- As the name suggests, these are costs associated with the variableinputs.
- In the case of Johns Woodworking shop, theTVC
=w L
wherew
denotes the wage rate.
Total Costs= TFC + TVC.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 13 / 30
Marginal Cost and Average Cost
Johns Cost Structure
Suppose that John has a TFC of 5000 and pays a wage rate of
1200 per week
Units of Total Total Fixed Total Variable TotalLabor Output Cost (TFC) Costs (TVC) Costs (TC)
0 0 5000 0 50001 10 5000 1200 6200
2 35
5000
2400
74003 80 5000 3600 86004 160 5000 4800 98005 193 5000 6000 110006 218 5000 7200 122007 239 5000 8400 134008 257 5000 9600 14600
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 14 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
8/15
Marginal Cost and Average Cost
The Cost Curves
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 15 / 30
Marginal Cost and Average Cost
Marginal and Average Cost Curves
While the breakdown of Total Cost into Total Fixed and TotalVariable Costs is helpful, two other measures of cost will be evenmore useful:
1 Marginal Cost: Measures the additionalcost of producing one moreunit of a good or service.
2 Average Cost: Measures the averagecost per unit of the good or
service (i.e., the costs averaged over allof the output produced by thefirm).
Understanding the distinction between these two concepts will be keyto finding the optimal level of production for the firm.
Well start with average cost
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 16 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
9/15
Marginal Cost and Average Cost
Average CostsThere are three types of average costs
1 Average Fixed Costs (AFC)= Total Fixed Costs divided by Output
AFC = TFC
Q (1)
Since the numerator is fixed, AFC will decline as output increases.2 Average Variable Costs (AVC)= Total Variable Costs divided by
Output
AVC = TVC
Q (2)
- Since TVC is initial slowing down as output increases (with increasingreturns to labor), AVC will initially fall as output increases.
- As TVC starts to increase more rapidly with output (with diminishing
returns to labor), AVC will start to increase with output.3 Average Total Costs (ATC)= Total Costs divided by Output
ATC = TC
Q =AFC+AVC (3)
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 17 / 30
Marginal Cost and Average Cost
Johns Average Costs
Units of Labor Total Product AFC AVC ATC1 10 500.00 120.00 620.002 35 142.86 68.57 211.433 80 62.50 45.00 107.504 160 31.25 30.00 61.25
5 193 25.91 31.09 56.996 218 22.94 33.03 55.967 239 20.92 35.15 56.078 257 19.46 37.35 56.81
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 18 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
10/15
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
11/15
Marginal Cost and Average Cost
Adding in the MC Curve
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 21 / 30
Marginal Cost and Average Cost
Patterns in the MC and AC Curves
Notice that the MC curve is
- Initially declining- this is due to increasing returns to labor- Eventually increasing- this is due to diminishing returns to labor
Theminimum-cost output, Qmin, is the quantity at which the averagetotal cost is lowest.
- This is at the bottom of the ATC curve.- and occurs where ATC=MC
At outputs less than Qmin, ATC >MC and ATC is falling.
At outputs greater than Qmin, ATC < MC and ATC is rising.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 22 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
12/15
Short-Run versus Long-Run Costs
Production Costs in the Long Run
Up until now, we have been focussing on the short-run, with some ofthe firms inputs held fixed.
In the long run, costs behave differently
Firm can adjust all of its inputs in any way it wantsIn the long run, there are no fixed inputs or fixed costs; i.e. all inputsand all costs are variable
Firm must decide what combination of inputs to use in producing anylevel of output
The firms goal is to earn the highest possible profit
To do this, it must follow the least cost rule; i.e., to produce any givenlevel of output the firm will choose the input mix with the lowest cost
This yields aLong-Run Average Total Cost Curve; i.e., therelationship between the output and the ATC when fixed costs arechosen to minimize total cost for each level of output.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 23 / 30
Short-Run versus Long-Run Costs
Consider Johns Woodworking Shop
Suppose that in our first production function, we assumed that Johnhad only one set of tools (e.g., 1 table saw, 1 drill press, and 1 routertable).
Well call this one unit of capital
The tools (and the space to house his tools) constitute fixed costs forJohn in the short-run.
In the long-run, John must decide whether or not he wants to expandhis capital stock
The trade-off is that additional capital will avoid worker congestion,but imposes a large fixed cost on the firm.
At low levels of production, having just one set of tools is not a bindingconstraint and John would rather avoid the additional capital costs.At higher levels of production, additional capital will avoid congestionproblems and the capital costs are spread out over more units ofproduction.
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 24 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
13/15
Short-Run versus Long-Run Costs
Different Levels of Capital
Labor Units of CapitalUnits of Labor Capital = 1 Capital = 2 Capital = 3
0 0 0 01 10 10 102 35 39 393 80 92 1014 160 184 2025 193 284 3146 218 397 4397 239 443 5718 257 478 709
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 25 / 30
Short-Run versus Long-Run Costs
The Corresponding ATC Figures are Given by
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 26 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
14/15
Short-Run versus Long-Run Costs
Johns Capital Stock ChoiceThe level of capital stock John chooses depends on his expected level ofoutput
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 27 / 30
Short-Run versus Long-Run Costs
If Capital Stock Can be Varied Continuously, We Get
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 28 / 30
8/13/2019 Chapter 12H - Behind the Supply Curve - Inputs and Costs
15/15
Short-Run versus Long-Run Costs
Returns to Scale
LRATC curves for industries usually exhibit three basic phases:1 Increasing Returns to Scale: Output range with declining LRATC
This is also known aseconomies of scaleEconomies of scale often arise due to the gains from specialization.The greatest opportunities for increased specialization occur when afirm is producing at a relatively low level of outputEconomies of scale can also arise due to minimum size requirements forcertain types of equipment.
2 Constant Returns to Scale: Output range with constant LRATC
Over some range of production, size may not matter and firms of thesame size will be equally cost-effective.
3 Decreasing Returns to Scale: Output range with increasing LRATC
This is also known asdiseconomies of scaleAs output continues to increase, most firms will reach a point where
bigness begins to cause problemsThis is true even in the long run, when the firm is free to increase itsplant size as well as its workforceDiseconomies of scale are more likely at higher output levels
Herriges (ISU) Ch. 12 Behind the Supply Curve Fall 2010 29 / 30
Short-Run versus Long-Run Costs