Changing the way the world lights for security®

The CAST LED Perimeter Series®

Award-Winning Perimeter LightingEnhance Security with up to 85% Savings in Materials, Labor, and Energy

Old world craftsmanship. . .today’s technology®

LED Perimeter LightingThe CAST LED Perimeter Lighting System™

Remarkable Savings for Lighting Fence and Building Perimeters “Provide highly effective perimeter security while saving up to 85% in materials, labor and energy.”

Descriptions: CAST LED Perimeter Fence Lights (CPL1, CPL12X, CPL13X, CPL14X - Complete System Kits available)

Low-voltage security lights powered by a reliable 24-volt power supply. Mounted on fence posts, these lights are sim-ple and quick to install and consume a fraction of the en-ergy of traditional perimeter lighting. Can also be used in any lighting application where long wire runs are required (such as wooded paths and piers). Higher powered models are available for applications that require higher illumination levels.CAST LED Perimeter Wall Pack Light (CPWP1)

Using the same LED array and driver as the Perimeter Fence Light, this compact Wall Pack is small enough to be used in niche areas, on posts, along alleys, under awnings - anywhere light is needed. It can be mounted flush on a surface or on a junction box.

Features of both luminaire types: ◗ 24-volt system allows for fast, safe installation with consider-

able cost savings (for labor, materials, and energy) compared to 120-volt installation.

◗ Provides no-glare lighting of appropriate illuminance for security cameras and patrols.

◗ Highest quality Cree LED’s with an extended life.

◗ All components protected from dust and moisture - impervious to environmental damage.

◗ Cast aluminum alloy and galvanized steel construction - withstands physical abuse.

◗ Extremely wide input voltage range (from 12 to 24 volts) al-lowing extremely long wire runs while maintaining acceptable voltage.

◗ A single 24-volt wire powers up to 60 lights to illuminate over1,200 linear ft. of fence.

◗ Dark-sky compliant - full-cutoff fixtures do not contribute to light pollution and light trespass.

“Typical flood lighting is cost-prohibitive for long perimeters -

the CAST System is remarkably affordable.”

CPL1

CPL12XCPWP1

“Never has so little light done so much work. We found this to be a simple, clean, efficient, energy-effective solution which could be used on nearly every property. It leverages the best benefits of LED – low voltage operation, optical efficiency, small size and long life for a truly robust security lighting solution.” - LightFair 2012 Judges

From the Judges:

CAST LED Perimeter Fence Light Winner of 6 Security & Lighting Industry Awards

CAST LED Perimeter Light

Awards

★ “Product Innovation Award” (PIA) (Architectual Products)

★ “Best In Category- Industrial, Vandal, Emergency & Exit” (Light Fair International)

★ “Most Innovative Product of the Year” (Light Fair International)

★ “Best of Security Products” (ASIS12 Accolades)

★ “Homeland Security Finalist - Best Perimeter Protection Solution”

(Government Security News)

★ “Top 30 Technology Innovations” (Security Sales & Integration)

2012

MOST INNOVATIVEPRODUCT

w w w . c a s t - l i g h t i n g . c o m

www.cast-lighting.comPh: 973•423•2303 Fax: 973•423•2304

cast-perimeter-system-brochure-2-6-14

© 2014 CAST Lighting LLC., 1120-A Goffle Rd., Hawthorne, NJ 07506 • Patents Pending

LED Perimeter LightingLED Perimeter Lighting Applications: Fence Lights & Wall Packs

CAST Fence Light: Airport application.

CAST Fence Light: Warehouse storage yard application.

CAST Wall Pack: Alley application.

www.cast-lighting.com

CAST LED Perimeter Fence Lighting: The CAST LED Perimeter Fence Lighting System addresses a need that other lighting systems do not - an inexpensive, en-ergy-efficient way to improve visual security for extensive or remote property boundaries. In addition to the base model, three other higher power models can be ordered to satisfy any lighting requirement.

Applications: ◗ Airports and other Transportation Hubs ◗ Correctional Facilities, Universities, and Schools ◗ Mines, Pipelines, Refineries and Energy Utilities ◗ Warehouses, Data Centers, and Storage Yards ◗ Embassies, Hotels, Resorts, and Parks ◗ Temporary Fences at Construction Sites and Military Bases

◗ Any property with a perimeter fence

Cost savings: ◗ Materials: Up to 85% savings because these compact fixtures are priced to make every perimeter lighting project affordable.

◗ Labor & Maintenance: Up to 90% savings because fixtures and wire are mounted directly to the fence, no trenching or pole in-stallation. No maintenance required over the expected 15-year life of the fixture.

◗ Energy: Up to 80% savings because these energy-efficient LED sources are highly targeted to the perimeter region - no wasted light.

AFTERBEFORE

CAST LED Building Perimeter Lighting : For CAST Wall PackThe CAST LED Perimeter Wall Pack Light (CPWP1) is a direct replacement for existing wall pack or flood light units or can be used as a low-cost way to add illumination to new or existing buildings and paths.

Applications: ◗ Any secure facility or property with buildings, paths, or outdoor structures

◗ Any location with existing wall pack or flood light fixtures

Cost savings: ◗ Materials: Up to 80% savings because this compact fixture is very affordable and priced far below

traditional wall packs and flood lights.

◗ Labor & Maintenance: Up to 50% savings because this fixture can be mounted directly to gang boxes or surface mounted; no lamp replacement - ever!

◗ Energy: Up to 80% savings because these energy-efficient LED sources are highly targeted to the building or path perimeters - no wasted light.

Calculate Voltage Loss and Energy Use It’s quick and easy to calculate voltage loss and energy con-sumption for any size CAST Perimeter Lighting System. To access calculators and tutorials, go to CAST website (www.cast-lighting.com) and navigate to Installers / Support / System Calculator.

Watch a quick 11-minute training video of an entire Perimeter System installation at

www.youtube.com/castlighting

SpecificationsSustainability & Replaceability

Sustainabable: CAST fixtures are designed for a lifetime of use. Cast-metal components are sand-cast in CAST Lighting’s own foundry that incorporates trimmings into new product. Nothing is discarded.

Replaceable and Upgradable: All parts of the CAST LED Perimeter Lights are replaceable and upgradeable. Should the LED array or driver fail, then the body or base can be replaced or repaired in the field without special tools or training. New technology can be incorporated into the fixture in the future.

Operational Features

Ambient Temperature Range (Operating): -40ºC to +55ºC

Voltage Input: Fixtures: 12 to 24 volts AC/DC; Transformers: Both 120V and 220/240V models available

Thermal Management: Passive thermal transfer through integrated components in physical contact with thermal pads and luminaire components.

Component Selection: No electrolytic capacitors in drive circuit; components rated for high long life.

Surge & Spike Protection: Voltage suppression for transient spikes and surges for voltages over 40V.

Moisture Protection: Encapsulated driver in thermally conductive epoxy, borosilicate dome to protect LEDs.

Electromagnetic Interference Prevention: Compliance with FCC Class B Conducted & Radiated.

Dimming: Units are not dimmable.

Mounting, Control, and Security Options

Mounting: CPL1: Fence Light attaches to top of fence posts up to 3” diameter; Offset Bracket (CPLOSB) available for situations where CPL1 must be mounted below fence top or for other offset needs. CPL12X, CPL13X, CPL14X: Fence Light attaches to top of fence posts up to 4” diameter; Offset Bracket (CPLOSB2) available for situations where CPL1 must be mounted below fence top or for other offset needs.CPWP1: Mounting tabs at top and bottom used for flush mounting on wall or other surface; mounting holes in back plate align with standard mounting tabs on singly gang junction box.

Control: 24-volt (300VA or 600VA) CAST Perimeter Lighting Transformers (CPT300, CPT600, E1CPT300 and E1CPT600) have built-in manual timers that can be combined with optional photocells (CTPC) or external control units to tie into existing control system.

Security: Vandal-proof hardware and hard-wired security line through conduit can deter theft of luminaires and alert owners via security system. Call for sources and options.

Dimensions & Construction

LED Perimeter Fence Light (CPL1)

22.5” tall x 4.625” wide. Eurometal hat, vase, and base; galvanized steel stem; aluminum saddle bracket; zinc-plated bolts; borosilicate glass LED enclosure.

LED Perimeter Fence Light (Higher Power) (CPL12X, CPL13X, CPL14X,)

35.3” tall x 7” wide. Eurometal hat, vase, and base; galvanized steel stem; stainless steel saddle bracket; stainless steel bolts; borosilicate glass LED enclosure.

LED Perimeter Wall Pack Light (CPWP1)

4.5” wide x 3” tall x 3” deep (matches plate size of single-gang electrical junction box). Eurometal body; borosilicate glass LED enclosure; stainless steel hardware.

Fixture Lead Wires (All): (2) 4” Tin-Coated Marine-Grade #20 AWG wires for connections to be made inside luminaire junction box. Parallel crimp connectors included.

Name (Model #) Light Source

Colo

r Te

mp

(CCT)

(ºK)

Colo

r Ren

der

ing

Index

(CRI)

Lum

en

Mai

nte

nan

ce

(L70)

(Hrs

)

Input

Voltag

e (V

)

Input

Curr

ent

(A)

Input

Pow

er

(W)

Pow

er F

acto

r (p

f)

Appar

ent

Pow

er (

VA)

Lum

inai

re

Lum

ens

(Lm

)

Max

imum

Can

del

a (C

BCP)

LED Perimeter Wall Pack Light (CPWP1) (3) Cree XTE Array

4,450ºK Neutral White

77 66,50012-24 AC/DC

0.38 7.0 0.82 8.5 490 138

LED Perimeter Fence Light (CPL1) (3) Cree XTE Array 0.38 7.0 0.82 8.5 265 90

LED Perimeter Fence Light (2X Power) (CPL12X)

(6) Cree XTE Array 0.76 14.0 0.82 17.1 960 276

LED Perimeter Fence Light (3X Power) (CPL13X)

(9) Cree XTE Array 1.14 21.0 0.82 25.6 1440 414

LED Perimeter Fence Light (4X Power) (CPL14X)

(12) Cree XTE Array 1.52 28.0 0.82 34.1 1900 552

IESNA Cut-Off Classification: Full-Cutoff (0% above Nadir); Dark-Sky Compliant (MLO) for reduction of light pollution and light trespass.

Contact CAST for photometrics, calculators and kit information.

Listings & Certifications

All CAST LED Lights: Conform to: UL Std’s. 1838 & 8750; CE; Certified to CAN/CSA Stds C22.2 No. 250.0 & C22.2 No. 250.13. Suitable for wet locations. FCC Class B Conducted and Radiated. RoHS

www.cast-lighting.comPh: 973•423•2303 Fax: 973•423•2304

cast-perimeter-system-brochure-2-6-14

© 2014, CAST Lighting LLC., 1120-A Goffle Rd., Hawthorne, NJ 07506 • Patents Pending

4.625” 7.0”

22.5” 35.3”

CPL1

CPL12XCPL13XCPL14X

4.5”

3”

CPWP1