Unrestricted / © Siemens AG 2016. All Rights Reserved.

Change of temperature sensor KTY84-130 on PT1000

Information and roadmap

23.03.2016

Unrestricted / © Siemens AG 2016. All Rights Reserved.

Page 2

Product discontinuation KTY84-130 temperature sensor PT1000 is the successor

KTY temperature sensor is discontinued and no longer available in the

market.

The PT1000 is the alternative successor to be used in our motors and

spindles

(the temperature characteristic is not compatible!!!).

With a project team set up for the purpose, we will be accompanying

the individual phases of the changeover.

The project team continuously updates the information available.

Siemens Industry Online Support (SIOS) Product note: 109478106

23.03.2016

Unrestricted / © Siemens AG 2016. All Rights Reserved.

Page 3

What is the impact when the KTY is no longer used?

Motors and spindles without DRIVE-

CLiQ interface and PT1000

temperature sensor will be assigned

a new MLFB *) (Article number)

(see roadmap and

FAQ, Entry ID: 109478077

Motors and spindles with DRIVE-

CLiQ interface remain compatible

towards the outside, and will keep

their MLFB (Article number)

*) Detailed information at product level about SIOS for explanation of the new article number at the time of change

23.03.2016

Unrestricted / © Siemens AG 2016. All Rights Reserved.

Page 4

Disclaimer

Information in the following Roadmap

is not binding and does not contain any commitment – it has been prepared solely for informational purposes based on currently available information.

is given preliminary and is subject to change without notice.

Binding information about product delivery date, functionality, order number, technical data, etc. is given only by Sales Release and Delivery Release Notice.

23.03.2016

Unrestricted / © Siemens AG 2016. All Rights Reserved.

Page 5

KTY-Motors SIMOTICS S/M/L/T 2SP1 spindles and application specific motors

PT1000-Motors SIMOTICS M/L/T 2SP1 spindles and application specific motors

Roadmap Drives Firmware and motors without DRIVE-CLiQ

2016

SINAMICS S PT1000 Support

SINUMERIK PT1000 Support

SIMOTION PT1000 Support

2020 2028

V4.8 V4.7 HF17

V4.8

V4.5

V4.7 SP2 HF1

V4.5 SP6

2018 2022 2024 2026

PT1000-Motors SIMOTICS S

SINAMICS G PT1000 Support

V4.7 SP6

*) exception T-1FW6 midyear 2017 **) exception T-1FW6 approx. 9 month later

Exact appointments will be communicated at product level about SIOS

Start Phase-out **)

Start Delivery *)

10 years spare part availability Product Cancellation **)

Product Discontinuation **)

Start Delivery *)

calendar year

23.03.2016

Unrestricted / © Siemens AG 2016. All Rights Reserved.

Page 6

Many thanks for your attention

You will find your personal contact person in our

Contact Person database