Reach: 10,5 - 15 meters

engine output: 224 kW

engine: c9 aceRt or electrical

+

We pRovide caRgo handleRs foR poRts & teRminals. ouR pRoducts aRe chaRacteRized by high efficiency, fast peRfoRmance, faultless Reliability, high machine availability and a long loW-cost WoRking life. the pRoducts aRe built of mostly standaRd, tRied-and-tested, ultRa-Reliable cateRpillaR components enhanced With ouR oWn application-specific and innovative solutions.

C H 3 6 E

ch36 for pedestal mounting; approx 35 ton

caterpillar 336

10,5-15 meter reach. heX and mh versions available

pedestalgantry

Lifting speed, end of stick ≈ 5 m/sslewing body 5 rpmslewing 360 °

Joystick hydraulic controlsautomatic climate controlAM/FM radiofront guard for protection of penetrating objects - ”fops”overhead protection frame for protection of falling objects - ”ops”

cat standard mineral oilhydraulic tank volume 175 litrestotal hydraulic system volume 410 litrespilot system volume 19 litresMax flow pilot system 43 l/minMax flow main pumps 560 l/min (2x280 l/min)Max pressure main circuit 350 bars (normal mode)

veg 200 kW, 690 volt, 60 hz cable and connector for shore supply not includedcat c9 acert, 224 kW

1 no. caterpillar rear view camera, mounted on the counter weight integrated with the main monitor in the cabin. 1 no. camera mounted on stick. 1 no. monitor mounted in cabin.

lincoln Quicklube vdc233 system for automatic greasing of the boom, stick and the swing bearing

external working lights:2 no. mounted on the cabin2 no. mounted on boom1 no. mounted on the upper body

front guard for protection of penetrating objects – “fops”overhead protection frame for protection of falling objects – “ops” 3 no. fire extinguishers

multidocker operator’s manualcaterpillar operator’s manualmultidocker spare parts listcaterpillar spare parts list

multidocker ch36 is delivered with a 12 month or 2 000 running hours’ warranty, whichever occurs first, to cover defects in materials or workmanship. Other options available.

machine weight

base machine

boom & stick

undercarriage

cycle data

cabin features

hydraulic system

drive electrical motor diesel engine

safety cameras

lubrication system

lightning

safety equipment

documentation

Warrenty

Technical data

MG7500C Pylon

Modules

Depending on the customer’s needs, the MultiDocker CH36E can be delivered in four standard undercarriage configurations with crawler tracks. Other options are the rail track fitted gantry undercarriage or pedestal. It’s also possible to have the cargo handler installed onboard a vessel or a barge. due to the unique module system we can tailor the height and width of the undercarriage raiser, the length of the track frames and the width of the flat shoes to meet special requirements in regards of weight, ground loadings, available space at the site etc.

the boom and stick is designed for multipurpose use and can easily handle most different kind of cargoes.

as an option we can offer a quick release coupling making the change between different work tools convenient and quick. due to our unique module design we can tailor the lengths of booms and sticks for special requirements.

heX and mh versions available.

A proper cabin environment generates good comfort and increases efficiency. With four standardized cabin solutions, multidocker offer a unique approach to operating comfort. by consulting the customer, we choose the most optimal cabin for each customer’s application. All MultiDocker cabin solutions reflect powerful and exceptional design, which creates a stable and unaffected environment during full production and heavy lifts.

Comfort and convinence keeps people productive+ Cabins

designed for multipurpose use+ Boom & stick

Solutions for your needs+ Undercarriage

This

doc

umen

t and

its

cont

ents

are

the

excl

usiv

e pr

oper

ty o

f Mul

tiDoc

ker C

argo

Han

dlin

g A

B an

d m

ay n

ot b

e co

pied

, re

prod

uced

, tra

nsm

itted

or c

omm

unic

ated

to a

third

pa

rty, o

r use

d fo

r any

pur

pose

with

out w

ritte

n pe

rmis

sion

.

Released

Date DateDate

Drawing No. Sheet Issue

Weight

Scale

First angle

projection

ISO 128:1982

Designed Checked

N/A

2 / 2 1

MultiDocker Cargo Handling ABNorrköping, Sweden

www.multidocker.com

jok

2013-02-20

CH70 Komplett

MG2600C

Width 4750 mm height 4300 mm

Width 4700 mm height 1-9 meters

Working hard for you!

We didn’t invent the multidockeR and staRt the company to make money. We invented the multidockeR to do a Job, foR us. because We WeRe dock-opeRatoRs ouRselves, We kneW Just What’s needed. We sat doWn and said to ouRselves: if We could invent eXactly the Right machines to do the Jobs We need, What Would it look like? hoW Would it WoRk?

and With a long pRocess of eXpeRimentation, We devised the multidockeR ch - a machine that’s mostly standaRd, tRied- and-tested, ultRa-Reliable cateRpillaR components. We Wanted high efficiency, fast peRfoRmance, faultless Reliability, high machine availability and a long loW-cost WoRking life. so We built it, and it WoRked. oveR the yeaRs We have developed the pRoducts fuRtheR and incReased ouR poRtfolio and ouR numbeR of paRtneRs. today We aRe pRoud to offeR WoRld leading pRoducts and seRvices to customeRs in many industRies all oveR the WoRld. Welcome to contact us oR visit ouR Web site foR moRe infoRmation!

multidocker cargo handling ab saltängsgatan 15se-602 22 norrköping, sweden

Phone +46 (0)11 450 30 00e-mail: info@multidocker.comWeb: www.multidocker.com

+