Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Certificates
Device platform RAPTOR
ET-208
SERIES 200 Operator Interfaces
HW-Rev. ET-208-TX-*-DC: 01.00.14 HW-Rev. ET-208-TX-*-AC: 01.00.23 HW-Rev. ET-208-TX-W00-DC-GLN: 01.00.31 HW-Rev. ET-208-TX-W00-AC-GLN: 01.00.40
Certificates version: 01.00.07 Issue: 18.08.2020
Certificates SERIES 200 Disclaimer
Page 2 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
Disclaimer
Publisher and copyright holder: R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 D 50829 Köln Telephone: (Sales Support) +49/(0)221/ 76 806 - 1000 (Technical Support) - 5000 Fax: - 4100 E-mail: (Sales Support) [email protected] (Technical Support) [email protected]
• All rights reserved. • This document may not be reproduced in whole or in part except with the written
consent of the publisher. • This document may be subject to change without notice.
Any warranty claims are limited to the right to demand amendments. Liability for any damage that might result from the content of this description or all other documentation is limited to clear cases of premeditation. We reserve the right to change our products and their specifications at any time, provided it is in the interest of technical progress. The information in the current manual (in the internet and on CD / DVD / USB stick) or in the operating instructions included with the HMI device applies. Trademarks The terms and names used in this document are registered trademarks and / or products of the companies in question. Copyright © 2020 R. STAHL HMI Systems GmbH. Subject to alterations.
Table of contents Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 3 of 44
Table of contents
Description Page
Disclaimer 2
Table of contents 3
1 Preface 4
2 ATEX EC type examination certificate 5
3 IECEx certificate 9
4 EAC certificate 14
5 PESO certificate 22
6 CNEX certificate 25
7 KGS certificate 30
7.1 KCC certification 32
8 JPNEx certificate 34
9 NEC certificate 38
10 CEC certificate 39
11 DNV / GL certificate 40
12 Release Notes 43
Certificates SERIES 200 Preface
Page 4 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
1 Preface
This document contains all valid certificates for the HMI devices of the SERIES 200 - device platform RAPTOR. All certificates are also available on R. STAHL's website and on the CDs / DVDs / USB sticks included in the delivery and a copy can also be ordered from R. STAHL HMI Systems GmbH.
NOTICE
ATEX EC type examination certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 5 of 44
2 ATEX EC type examination certificate
Certificates SERIES 200 ATEX EC type examination certificate
Page 6 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
ATEX EC type examination certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 7 of 44
Certificates SERIES 200 ATEX EC type examination certificate
Page 8 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
IECEx certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 9 of 44
3 IECEx certificate
Certificates SERIES 200 IECEx certificate
Page 10 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
IECEx certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 11 of 44
Certificates SERIES 200 IECEx certificate
Page 12 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
IECEx certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 13 of 44
Certificates SERIES 200 EAC certificate
Page 14 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
4 EAC certificate
EAC certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 15 of 44
Certificates SERIES 200 EAC certificate
Page 16 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
EAC certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 17 of 44
Certificates SERIES 200 EAC certificate
Page 18 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
EAC certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 19 of 44
Certificates SERIES 200 EAC certificate
Page 20 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
EAC certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 21 of 44
Certificates SERIES 200 PESO certificate
Page 22 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
5 PESO certificate
PESO certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 23 of 44
Certificates SERIES 200 PESO certificate
Page 24 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
CNEX certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 25 of 44
6 CNEX certificate
Certificates SERIES 200 CNEX certificate
Page 26 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
CNEX certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 27 of 44
Certificates SERIES 200 CNEX certificate
Page 28 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
CNEX certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 29 of 44
Certificates SERIES 200 KGS certificate
Page 30 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
7 KGS certificate
KGS certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 31 of 44
Certificates SERIES 200 KGS certificate
Page 32 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
7.1 KCC certification
KGS certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 33 of 44
Certificates SERIES 200 JPNEx certificate
Page 34 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
8 JPNEx certificate
JPNEx certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 35 of 44
Certificates SERIES 200 JPNEx certificate
Page 36 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
JPNEx certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 37 of 44
Certificates SERIES 200 NEC certificate
Page 38 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
9 NEC certificate
Not version: ET-208-TX-W00-AC-GL (see operating instruction)
CEC certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 39 of 44
10 CEC certificate
Not version: ET-208-TX-W00-AC-GL (see operating instruction)
Certificates SERIES 200 DNV / GL certificate
Page 40 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
11 DNV / GL certificate
only version: ET-208-TX-W00-AC-GL
DNV / GL certificate Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 41 of 44
Certificates SERIES 200 DNV / GL certificate
Page 42 of 44 R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020
Release Notes Certificates SERIES 200
R. STAHL HMI Systems GmbH / CE_ET_208_en_V_01_00_07.docx / 18.08.2020 Page 43 of 44
12 Release Notes
The chapter entitled "Release Notes" contains all the changes made in every version of the certificates. Version 01.00.00
First edition for ET-208 devices
Version 01.00.01
Using of new name device platform Manta
Changing of address and phone numbers
Changing of HW revision
Removal of sentence "Microsoft Corporation" in Trademarks"
Addition of TR certificate Version 01.00.02
Renew of TR (EAC) certificate
Formal corrections Version 01.00.03
Addition of PESO certificate
Formal corrections Version 01.00.04
Addition of CNEX certificate
Formal corrections Version 01.00.05
Addition of KGS certificate
Formal corrections Version 01.00.06
Changing disclaimer, new mail addresses
Adaption address field verso
Changing HW Rev at cover
Addition of ET-208-TX-W00-DC-GLN device version
Addition of JPNEx (Japan) certification
Addition of UL approval (NEC / CEC) for device version ET-208-TX-W00-DC-GLN
Formal corrections Version 01.00.07
Changing layout cover
Adaption HW Rev at cover to operating instructions
Renew of EAC certificate
Changing notice at NEC / CEC certification
Addition of DNV / GL certification for version ET-208-TX-W00-AC-GL
Formal changes
R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 D 50829 Köln T: (Sales Support) +49 221 768 06 - 1000 (Technical Support) +49 221 768 06 - 5000 F: +49 221 768 06 - 4100 E: (Sales Support) [email protected] (Technical Support) [email protected] r-stahl.com exicom.de