CERTIFICATE OF COMPLIANCE - CIMON

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20131202-E231117

Report Reference E231117-20131128

Issue Date 2013-DECEMBER-02

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 1

Issued to: CIMON CO., LTD

KDT B/D 48 BEOLMAL-RO

BUNDANG-GU

SEONGNAM-SI GYEONGGI-DO 463-836 KOREA

This is to certify that

representative samples of

PROGRAMMABLE CONTROLLERS

Monitoring Units of Programmable controller, Xpanel Hybrid

Series, Model CM-HP followed by 07, followed by CD-,

followed by A or D, followed by E, N, followed by R or S

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 508 Industrial Control Equipment

CAN/CSA C22.2 No. 142-M1987 Process Control

Equipment

Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Listing Mark for the US and Canada should be considered as being covered by UL's Listing and Follow-Up Service meeting the appropriate requirements for US and Canada. The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with “C” and

“US” identifiers: the word “LISTED”; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product.

http://www.ul.com/database

File E231117

Project 4786090845

November 28, 2013

REPORT

ON

PROGRAMMABLE CONTROLLERS

CIMON CO., LTD

SEONGNAM-SI GYEONGGI-DO 463-836 KOREA

Copyright © 2013 UL LLC.

UL LLC authorizes the above named company to reproduce this Report

provided it is reproduced in its entirety.

File E231117 Vol. 1 Sec. 7 Page 1 Issued: 2013-11-28

and Report

DESCRIPTION

PRODUCT COVERED:

USL, CNL – Monitoring Units of Programmable controller, Xpanel Hybrid

Series, Model CM-HP followed by 07, followed by CD-, followed by A or D,

followed by E, N, followed by R or S.

GENERAL:

USL - Indicates evaluation to UL 508, Seventeenth Edition, the Standard

for Industrial Control Equipment.

CNL - Indicates evaluation to CSA 22.2 No. 142-1987, 3rd Edition, the

Standard for Process Control Equipment for Use in Ordinary Locations.

ELECTRICAL RATINGS:

INPUT / OUTPUT Modules:

Models System Power Input rating Output rating

CM-HP-EAA 24 V dc 24 V dc, 154 mA Analog Output

CM-HP-EDR

Supplied by

internal LVLC

circuit

8 point Relay Output:

6 point, 250 V ac,

110 V dc, 5 A.

DM-HP-Dummy N/A N/A N/A

N/A: Not applicable

Ambient Temperature Rating: 50 C.

Flat Surface of Type 1 Enclosure.

Model Series Model Input Source

Xpanel

Hybrid

CM-HP07CD-AER 100-240 V ac, 50/60 Hz, 0.9 A

CM-HP07CD-AES 100-240 V ac, 50/60 Hz, 0.9 A

CM-HP07CD-ANR 100-240 V ac, 50/60 Hz, 0.9 A

CM-HP07CD-ANS 100-240 V ac, 50/60 Hz, 0.9 A

CM-HP07CD-DER 24 V dc, 1.65 A

CM-HP07CD-DES 24 V dc, 1.65 A

CM-HP07CD-DNR 24 V dc, 1.65 A

CM-HP07CD-DNS 24 V dc, 1.65 A


and Report

NOMENCLATURE:

Xpanel Hybrid

CM-HP 07 CD - A E R

I II III IV V VI

I CM-HP – Xpanel Hybrid Series Name

II LCD Size

07 – 7.0 inch

III Main Board Version

CD – Fourth version

IV Power Supply Type

A – AC type (100-240 V ac)

D – DC type (24 V dc)

V Hardware Type

E – Ethernet

N – Economical type

VI Communication Type

R – RS232

S – RS485


and Report

TECHNICAL CONSIDERATIONS: (Not for Field Representative’s Use)

Use - These devices are Programmable controller operator interface panel

intended for use in industrial applications where the suitability of the

combination has been determined by Underwriters Laboratories Inc.

Spacings - Spacings were evaluated in accordance with Table 36.1, Column

B and Table 180.1 of UL 508, the Standard for Industrial Control Equipment,

Seventeenth Edition and Table 3 and 4 for the Canadian Standard for Process

Control Equipment CAN CSA C22.2 No. 142-1987.

CONSTRUCTION DETAILS:

See Section General for additional details.

The product shall be constructed in accordance with the following

description.

Corrosion Protection - All parts are of corrosion resistant material or

are plated or painted as corrosion protection.

Printed Wiring Board - R/C (ZPMV2) rated V-2 or better, with maximum

operating temperature at least 105 C.

Marking - Pressure-sensitive label indicating Listee’s name or file

number, model number and electrical ratings provided on each device. Unless

otherwise specified all markings in the Report are printed in R/C (PGDQ2),

suitable for the surface applied to.

Following marking is shipped separately with the device. In addition,

the device shall be marked on the label, with a reference to the information,

such as by diagram number or document number.

“For use on a flat surface of a Type 1 enclosure”.

Wiring Terminal Markings, Tightening Torque and type of wire – See

Section General in details.


and Report

CONSTRUCTION DETAILS: (CONT’D)

The Instruction manual shall contain a notice adjacent to the battery

stating the following for Battery of All models as described in this report:

"Replace Battery With Hitachi Maxell Ltd, Part No. CR2032 Only. Use of Another

Battery May Present A Risk Of Fire Or Explosion. See Owner's Manual For

Safety Instructions."

The instruction manual shall also contain the above warning notice along with

instructions to the user as to where replacement batteries can be obtained.

The instruction manual shall also contain the following additional warning

notice for All models:

"WARNING, Battery may explode if mistreated. Do not recharge, disassemble or

dispose of in fire."


and Report

Xpanel Hybrid Series, Model CM-HP07CD-AER – FIG. 1

General – FIG. 1 shows external view. It represents models CM-HP07CD-

AES, CM-HP07CD-ANR, CM-HP07CD-ANS, CM-HP07CD-DER, CM-HP07CD-DES, CM-HP07CD-DNR

and CM-HP07CD-DNS except where noted.

1. Front Enclosure - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV

(E115797), type VE-0856(+), rated 5VB, min. 2.4 mm thick. Overall

dimension approx. 185 by 127 by 23.4 mm. Secured to Rear Housing by 4

screws. (Subjected to 5 inch flammability test)

2. Rear Housing - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV


dimension approx. 176 by 117.5 by 67.96 mm. Secured to Front Enclosre by

4 screws. (Subjected to 5 inch flammability test)

3. RS-232C Communication Connector - 9 pin connector for RS-232C

communication between Xpanel and another communication units.

4. Audio output – 3.5 pi phone jack.

5. SD Card socket – 1 provided.

6. Ethernet (RJ-45) – 1 provided.

7. USB port – 2 provided, general USB type for Host and mini USB type for

Client.

8. Glass Plate (LCD Screen) - Overall dimensions approx. 164.9 by 100 mm,

5.7 mm thick.

9. Terminal Block (TB1) (Mating Header) – R/C (XCFR2/8), DEGSON ELECTRONICS

CO LTD (E228872), Cat. No. 2EDGRC5.08. rated 300 V, 15 A. (28-12 AWG,

Str/Sol, torque 4.4 lb-in., FW1)

10. Terminal Block (Plug-in Block) – R/C (XCFR2/8), JIE KE ELECTRONICS CO

LTD (E228313), Cat. No. JK2EDGK5.08. rated 300 V, 10 A. (12-24 AWG,

Str/Sol, torque 5.0 lb-in., FW2)


and Report

Xpanel Hybrid Series, Model CM-HP07CD-AER – FIG. 2

General – FIG. 2 shows internal main board of model CM-HP07CD-AER. Main

board is same for all models.

1. Lithium Battery - R/C (BBCV2), Hitachi Maxell Ltd., (MH12568), Cat. No.

CR2032, maximum reverse charging current 10 mA. Reverse charging

protection is provided by series circuit of IC (U4) of Maxim Integrated

Products type DS1339+.


and Report

Xpanel Hybrid Series, AC Power model CM-HP07CD-AER – FIG. 3

Fig. 3 shows internal SMPS of CM-HP55A manufactured by LCK. It

represents all AC power models. See ILL. 1 for schematic diagram and ILL. 2

for trace layout.

1. Terminal Block (TB1) – R/C (XCFR2/8), DEGSON ELECTRONICS CO LTD

(E228872), Cat. No. 2EDGRC5.08, rated 300 V, 15 A. (28-12 AWG, Sol/Str,

torque 4.4 lb-in., FW1).

2. Fuse (F1) – R/C (JDYX2/8), COOPER BUSSMANN L L C (E19180), type SS-5,

rated 250 Vac, 3.15 A.

Alternate - R/C (JDYX2/8), ORISEL CO LTD (E126056), type OS5, rated 250

Vac, 3.15 A.

3. Surge Protective Device (S1) – R/C (VZCA2), CN, AMOTECH CO LTD

(E332687), Type INR14D471, SPD Type 3 applications.

Alternate - R/C (VZCA2), CN, SAMWHA CAPACITOR CO LTD (E332621), Type

SVC471D-14A, SPD Type 3 applications.

4. Surge Protective Device (S2, S3) – R/C (VZCA2), CN, AMOTECH CO LTD




5. Y Capacitor (C1, C2) – R/C (FOWX2/8), DONGIL ELECTRONIC CO LTD

(E128646), Type DA, rated 400 V, 2200 pF.

Alternate - R/C (FOWX2/8), SAMWHA CAPACITOR CO LTD (E97754), Type SD,

rated 400 V, 2200 pF.

6. X Capacitors (C3, C4) – R/C (FOWX2/8), PILKOR ELECTRONICS CO LTD

(E165646), Type PCX2 225, rated 0.22 uF.

Alternate – R/C (FOWX2/8), CARLI ELECTRONICS CO LTD (E120045), Type MPX,

rated 0.22 uF.

7. Thermister (TH1) – R/C (XGPU2/8), DSC ELECTRONICS CO LTD (E156388), Type

DSC-10D-15, rated 240 V, 10 ohm.

8. Linefilter (L1) – Constructed as follows.

a. Bobbin - R/C (QMFZ2), Phenolic, HEXION SPECIALTY CHEMICALS GMBH

(E61040), type PF2736(a)(b), rated minimum V-0, RTI minimum 150

C, minimum 1.2 mm thickness.

b. Core – Ferrite Core. Overall sized 18.5 by 16.8 by 23.5 mm.

C. Windings – Magnet wire.


and Report

Xpanel Hybrid Series, AC Power model CM-HP07CD-AER – FIG. 3 (Cont’d)

9. Capacitor (C10) – Rated 400 V, 100 uF.

10. Optical Isolator (PC1) – R/C (FPQU2/8), LITE-ON TECHNOLOGY CORP

(E113898), Type LTV817, 5300 V isolation.

Alternate - R/C (FPQU2/8), SHARP CORP ELECTRONIC COMPONENTS AND DEVICES

DIV (E64380), Type PC817, 5000 V isolation.

11. Bridge Capacitor (C18) – R/C (FOWX2/8), DONGIL ELECTRONIC CO LTD



rated 400 V, 2200 pF.

12. Bridge Diode (BD1) – Rated 800 V, 2 A.

13. Switching IC (U1) - Type TOP258MN by Power Integration, rated 700 V,

6.88 A, (Junction Temp. 150 C).

14. Diode (D4) – Rated 40 V, 30 A.

15. Heatsink (HS1) – Aluminum, overall approx. 38 by 20 by 25 mm, minimum

1.5 mm thick. Soldered on PWB.

16. Transformer (T1) - Type LMT55A by LCK Electronics, constructed as

follows. See ILL. 5 for details.

Bobbin - R/C (QMFZ2), Phenolic, MOMENTIVE SPECIALTY CHEMICALS GMBH

(E61040), type PF2736(a)(b), rated minimum V-0, RTI minimum 150 C,

minimum 0.9 mm thickness. Suitable for direct support requirement.


and Report

Xpanel Hybrid Series, DC Power model CM-HP07CD-DER – FIG. 4

Fig. 4 shows internal SMPS of CM-HP55D manufactured by LCK. It

represents all DC power models. See ILL. 3 for schematic diagram and ILL. 4

for trace layout.

1. Terminal Block (CN1) – R/C (XCFR2/8), DEGSON ELECTRONICS CO LTD

(E228872), Cat. No. 2EDGRC5.08, rated 300 V, 15 A. (28-12 AWG, Sol/Str,

torque 4.4 lb-in., FW1)

2. Fuse (F1) – R/C (JDYX2/8), ORISEL CO LTD (E126056), type OR5, rated 250

Vac, 8 A.

3. Surge Protective Device (S1, S2, S3) – R/C (VZCA2), CN, AMOTECH CO LTD




4. Y Capacitor (C1, C2) – R/C (FOWX2/8), DONGIL ELECTRONIC CO LTD



rated 400 V, 2200 pF.

5. X Capacitor (C3, C4, C21) – R/C (FOWX2/8), PILKOR ELECTRONICS CO LTD

(E165646), Type PCX2 335, rated 0.33 uF.

Alternate – R/C (FOWX2/8), CARLI ELECTRONICS CO LTD (E120045), Type MPX,

rated 0.33 uF.

6. Linefilter (L1, L3) – Constructed as follows.

a. Bobbin - R/C (QMFZ2), Phenolic, HEXION SPECIALTY CHEMICALS GMBH

(E61040), type PF2736(a)(b), rated minimum V-0, RTI minimum 150

C, minimum 1.2 mm thickness.

b. Core – Ferrite Core. Overall sized 18.5 by 16.8 by 23.5 mm.

C. Windings – Magnet wire.


and Report

Xpanel Hybrid Series, DC Power model CM-HP07CD-DER – FIG. 4 (Cont’d)

7. Optical Isolator (PC1) – R/C (FPQU2/8), LITE-ON TECHNOLOGY CORP

(E113898), Type LTV817, 5300 V isolation.

Alternate - R/C (FPQU2/8), SHARP CORP ELECTRONIC COMPONENTS AND DEVICES

DIV (E64380), Type PC817, 5000 V isolation.

8. Bridge Capacitor (C6) - R/C (FOWX2/8), DONGIL ELECTRONIC CO LTD



rated 400 V, 2200 pF.

9. Switching IC (U1) - Type FAN7554 by Fairchild, rated 30 V, 1 A,

(Junction Temp. 150 C).

10. MOSFET (Q1) – FQP(F)70N10 by Fairchild, rated 100 V, 57 A. Secured to

Heatsink. (Junction Temp. 175 C).

11. Heatsink (HS1) – Aluminum, overall approx. 23.5 by 17 by 25 mm, minimum


12. Diode (D1) – Rated 40 V, 5 A.

13. Diode (D4) – Rated 40 V, 30 A.

14. Heatsink (HS3) – Aluminum, overall approx. 38 by 20 by 25 mm, minimum


15. Transformer (T1) - Type LMT55D by LCK Electronics, constructed as

follows. See ILL. 6 for details.

Bobbin - R/C (QMFZ2), Phenolic, MOMENTIVE SPECIALTY CHEMICALS GMBH

(E61040), type PF2736(a)(b), rated minimum V-0, RTI minimum 150 ºC,

minimum 0.9 mm thickness. Suitable for direct support requirement.


and Report

Xpanel Hybrid Series, CPU & DIDO Board – FIG. 5

Fig. 5 shows internal CPU & DIDO Board of models CM-HP07CD-AER, CM-

HP07CD-ANR, CM-HP07CD-DER and CM-HP07CD-DNR.

1. RS-232 Communication Terminal Block (Mating Header) – R/C (XCFR2/8),

DINKLE ENTERPRISE CO LTD (E102914), Cat. No. 141R Series. 3 pin

connector for RS-232 communication between CPU & DIDO Board and another

communication units. (20-26 AWG, Sol/Str.)

2. Relay - R/C (NRNT2/8), PANASONIC CORPORATION (E43149), Cat. No. PA1a-5V,

rated 30 V dc, 5 A; 250 V ac, 5 A.





4. Digital Input/Output Terminal Block (Mating Header) – R/C (XCFR2/8),

DINKLE ENTERPRISE CO LTD (E102914), Cat. No. ECH350R series. ECH350R-

09P. 9 pin connector for CPU & DIDO Board between X Panel and another

DIDO units.

5. Digital Input/Output Terminal Block (Plug-in Block) – R/C (XCFR2/8),

DINKLE ENTERPRISE CO LTD (E102914), Cat. No. EC series. EC350V-09P. 9

pin connector for CPU & DIDO Board between X Panel and another DIDO

units. (28-14 AWG, Sol/Str, torque 1.7 lb-in., FW2.)


and Report

Xpanel Hybrid Series, CPU & DIDO Board – FIG. 6

Fig. 6 shows internal CPU & DIDO Board of models CM-HP07CD-AES, CM-

HP07CD-ANS, CM-HP07CD-DES and CM-HP07CD-DNS.

1. RS-485 Communication Terminal Block (Mating Header) – R/C (XCFR2/8),

DINKLE ENTERPRISE CO LTD (E102914), Cat. No. 141R Series. 3 pin

connector for RS-232 communication between CPU & DIDO Board and another

communication units. (20-26 AWG, Sol/Str.)

2. Relay - R/C (NRNT2/8), PANASONIC CORPORATION (E43149), Cat. No. PA1a-5V,

rated 30 V dc, 5 A; 250 V ac, 5 A.





4. Digital Input/Output Terminal Block (Mating Header) – R/C (XCFR2/8),


09P. 9 pin connector for CPU & DIDO Board between X Panel and another

DIDO units.

5. Digital Input/Output Terminal Block (Plug-in Block) – R/C (XCFR2/8),

DINKLE ENTERPRISE CO LTD (E102914), Cat. No. EC series. EC350V-09P. 9

pin connector for CPU & DIDO Board between X Panel and another DIDO

units. (28-14 AWG, Sol/Str, torque 1.7 lb-in., FW2.)


and Report

Xpanel Hybrid Series, Input/Output Module, model CM-HP-EAA – FIG. 7 & 8

Fig. 7 shows external view and Fig. 8 shows internal view of model CM-

HP-EAA. It is mounted on Xpanel Hybrid Series by mechanical fit and 1 screw.

1. Sub Case - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV (E115797),

type VE-0856(+), rated 5VB, min. 1.6 mm thick. Overall dimension approx.

110 by 71 by 23.4 mm. Secured to Rear Housing by 2 screws. (Subjected to

5 inch flammability test)

2. Sub Bottom Case - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV


dimension approx. 105.2 by 66.2 by 3.4 mm. Secured to Rear Housing by 2


3. Terminal Block (CN6, Mating header) – R/C (XCFR2/8), DEGSON ELECTRONICS

CO LTD (E228872), Cat. No. 15EDG Series, 15EDGRM-3.81-03p, rated 300 V,

8 A. (18-26 AWG, Str/Sol, torque 1.7 lb-in., FW2)

4. Terminal Block (Plug-in Block) – R/C (XCFR2/8), DEGSON ELECTRONICS CO

LTD (E228872), Cat. No. 15EDG Series, 15EDGKM-3.81-03p, rated 300 V, 8

A. (18-26 AWG, Str/Sol, torque 1.7 lb-in., FW2)

5. Terminal Block (CN4, CN5, Mating header) – R/C (XCFR2/8), DEGSON

ELECTRONICS CO LTD (E228872), Cat. No. 15EDG Series, 15EDGRC-3.5-06p,

rated 300 V, 8 A. (18-26 AWG, Str/Sol, torque 1.7 lb-in., FW2)

6. Terminal Block (CN4, CN5, Mating header) – R/C (XCFR2/8), DEGSON

ELECTRONICS CO LTD (E228872), Cat. No. 15EDG Series, 15EDGK-3.5-06P,

rated 300 V, 8 A. (18-26 AWG, Str/Sol, torque 1.7 lb-in., FW2)

7. DC/DC Converter (U8) – R/C (QQGQ2/8), POWER MATE TECHNOLOGY CO LTD

(E193009), Cat. No. PDL03-24D15, rated 15 V dc, 0.1 A, -15V dc, -0.1 A;

18 - 36 V dc.

8. Varistor (TNR15) – R/C (VZCA2), CN, AMOTECH CO LTD (E332687), Type

INR10D470, SPD Type 4 applications.


SVC470D-10, SPD Type 4 applications.

9. Bridge Capacitor (C21) – R/C (FOWX2/8), SAMWHA CAPACITOR CO LTD

(E97754), Type SD, rated 400 Vac, 2200 pF.

Alternate - R/C (FOWX2/8), DONGIL ELECTRONIC CO LTD (E128646), Type DA,

rated 400 Vac, 2200 pF.


and Report

Xpanel Hybrid Series, Input/Output Module, model CM-HP-EDR – FIG. 9 & 10

Fig. 9 shows external view and Fig. 10 shows internal view of model CM-

HP-EDR. It is mounted on Xpanel Hybrid Series by mechanical fit and 1 screw.

1. Sub Case - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV (E115797),

type VE-0856(+), rated 5VB, min. 1.6 mm thick. Overall dimension approx.

110 by 71 by 23.4 mm. Secured to Rear Housing by 2 screws. (Subjected to

5 inch flammability test)

2. Sub Bottom Case - R/C (QMFZ2), CHEIL INDUSTRIES INC CHEMICALS DIV


dimension approx. 105.2 by 66.2 by 3.4 mm. Secured to Rear Housing by 2


3. Terminal Block (TB1, Mating Header) – R/C (XCFR2/8), – R/C (XCFR2/8),


09P. 9 pin connector for EDR Board between X Panel and another DIDO

units.

4. Terminal Block (Plug-in Block) – R/C (XCFR2/8), DINKLE ENTERPRISE CO LTD

(E102914), Cat. No. EC series. EC350V-09P. 9 pin connector for CPU &

DIDO Board between X Panel and another DIDO units. (28-14 AWG, Sol/Str,

torque 1.7 lb-in., FW2.)

5. Terminal Block (TB2, Mating Header) – R/C (XCFR2/8), – R/C (XCFR2/8),


07P. 7 pin connector for EDR Board between X Panel and another DIDO

units.

6. Terminal Block (TB2, Plug-in Block) – R/C (XCFR2/8), DINKLE ENTERPRISE

CO LTD (E102914), Cat. No. EC series. EC350V-09P. 9 pin connector for

CPU & DIDO Board between X Panel and another DIDO units. (28-14 AWG,

Sol/Str, torque 1.7 lb-in., FW2.)

7. Relay (RY1-RY6) – R/C (NRNT2/8), PANASONIC CORPORATION (E43149), Cat.

No. PA1a-5V, rated 30 V dc, 5 A; 250 V ac, 5 A.

Documents

CERTIFICATE OF COMPLIANCE - CIMON