Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
• premium quality• high durability • fast and cost-saving installation• excellent insulation properties
Mo Tu We Th Fr
Ceretherm Express SystemFast and high quality insulation
Easy application
Your benefits
Labour cost saving
Quick application
Cost saving in transportand storage
Premium insulating and durability properties of the whole system
port
erties
tion
CT 84 ExpressQuick and convenient styrofoam fixing
Traditional cement adhesives require to handle many heavy bags, which are inconvenient to transport and carry around. And you have to prepare mortar that is a messy, dusty job.CT 84 Express is notably different. Ready to use straight from a container and applied with a gun it guarantees clean and very fast work. It is also more effi cient – stronger in adhesion and allowing for more EPS-boards to be fi xed.
Cement adhesive Ceresit CT 84 Express
Application with a gun speeding up the insulation process.
THERM
AL INSULATION SYST
E MS
YIELD
10 m2
High homogeneitythanks to metal ball
inside the can
Low expansion preventing unwanted deformations
Enhanced thermalinsulation properties,similar to EPS or wool
Ready to use from the can
100% more yield than traditional
cement adhesives
15% higher adhesive strength than traditional
cement adhesives
10m2m2m22
h dh
Easy to apply with the gun
Application from 0°C and at high humidity conditions
Anchoring already after ca. 2 h speeding up
thermal insulation work
2H
White adhesive and reinforcing mortar “2 in 1” CT 87 does not require priming before rendering allowing to skip the whole priming step in the insulation work. At the same time its optimal consistency makes both the mortar spreading and mesh fi xing easier. Enriched formula with fi bres content strengthens the reinforcing performance. All these guarantees the enhanced quality of the mortar and quicker completion of the project leading to further savings.
CT 87 “2 in 1”Fast reinforcing with no priming needed
One application– two working steps
Skipping priming step speeding up the insulation process. 2 in 1FORMULA
NO PRIMING
Your benefits
Time saving(no priming)
Labour cost saving(one application step skipped)
Cost saving in transportand storage fewer products
Premium product for higher durability propertiesof the whole system
Reinforcing + priming Ceresit CT 87 “2 in 1”
“2 in 1” formula – priming step skipped
Flexible, strengthened with fibres
Top quality product within adhesive
and reinforcing mortars
Excellent working parameters
High resistance to mechanical damages
25% lower water absorbability
2 in 111
Q
BioProtect
All the components are designed to guarantee long-lasting insulating performance of the system. This is additionally guaranteed by the last layer of silicone plasters CT 74 or CT 75, which are the top quality products in the segment of plasters. With their extremely low water absorbality and very high dirt and microbiological contamination resistance the plaster stays at its best condition for many years.
Silicone plasters are enriched with special BioProtect formula that was developed to protect the facade against biological contamination and the growth of fungi and algae. The release of active substances takes place gradually, in a controlled manner, ensuring a long-lasting effect.
• top quality plasters• extremely low water uptake and high vapour permeability• self-cleaning effect (highly resistant to dirt)• extremely durable (elastic and impact resistant)• aesthetic and stable colours• BioProtect formula• available in full palette of Ceresit Colours of Nature®
CT 74 and CT 75Durable and aesthetic finishing
WATER Oceans and seas, freshness and clearness.This is the blue colour that brings peace and comfort with the positive thinking. Ceresit gives you a wide choice of shades from very fair blues to the most intensive ones. Enjoy the clear blue of Pacific, frosty beauty of blue Arctic or any other region, depending on your very own choice.
EARTHAndalusia browns and pink rocks of Arizona are the examples of this largest Ceresit colour group. It represents love for nature and tradition and the basic need of being close to the earth around you. These are authentic colours which are always beautiful, regardless of quick fashions and moods.
SANDCalifornia sunny landscapes, Barbados beaches and vast deserts of the world were the inspiration for this group of colours. Perfect choice for those who like warm, friendly yellows and fair beiges. These are the colours that stimulate optimism and joy of life and bring the sunny memories. Enjoy your house in one of the sandy shades!
FORESTPeace, harmony and love for the nature. These are the greens of Montana landscape, Toscana hills, Borneo jungle and many other beautiful regions of the world. Fair or dark, pure green or bluish – all these colours find their lovers. Designed by Ceresit will make your house a part of the nature and a harmonious element of your local landscape.
Think of the world as of the colourful place. Bring all the memories of the wonderful nature, trips to exotic destinations and beautiful sites. Nature offers a variety of colours from light blue of the oceans and seas, sunny yellows and oranges of beaches and deserts, through intense red- brown earthy shades to the calm greens of forests and hills.
Now have a look at the colourful world of Ceresit plasters and paints. Colours of Nature palette includes 35 lines, each of 6 shades, altogether creating 211 inspiring tones. Our latest edition has been refreshed with 48 new colours to even better suit the facade design and modern coloristic trends.
Get inspired by the beautiful shades from Water, Sand, Earth or Forest lines and choose your very special colour for your dream house.
Get inspired by Col urs of Nature
Ceresit Ceretherm Express System
Comparison of insulation time between two systems:
• premium quality • super quick • convenient • perfect insulation • highly durable • self cleaning • high impact resistance
Henkel CEEErdbergstr. 291030 Viennawww.henkel-cee.com
Build on professional solutions.
Products
1. Fixing CT 84 Express Express PU-adhesive for polystyrene boards
2. Insulation material CT 315 Polystyrene thermal insulation board
3. ReinforcingCT 87 “2 in 1”
CT 325
Adhesive and reinforcing mortar EPS/wool “2 in 1”
Fibre glass reinforcing mesh (density of 165 g/m2)
PRIMING NO PRIMING NEEDED
4. Silicone plastersCT 74 “Stone” structure grain 1.5, 2.5 mm
CT 75 “Rustic” structure grain 2.0 mm
Comparison of costs between two systems (the costs are calculated for 200 m2 family house):
Costs (€) Traditional system with cement adhesive Ceresit Ceretherm Express System Savings
Labour (€)
Scaffold rent (€)
Transport (€)
Storage (€)
Traditional system with cement adhesive
Day 1 2 3 4 5 6 7 8 9 10
gluing panels
grinding panels
anchoring panels
armouring layer
priming
rendering
Ceresit Ceretherm Express System
Day 1 2 3 4 5 6 7 8 9 10
gluing panels – CT 84 Express
5 days faster!
grinding panels
anchoring panels
armouring layer – CT 87 “2 in 1”
PRIMING – NONE
rendering
1
2
3
4