Dental laboratory guide for veneering and staining with Cercon ceram love and Cercon ceram Kiss

Cercon ht

2

A multi-indication system for a natural aesthetic

Veneering concept Cercon ht pre-coloured

Veneering concept for the liquid technique

Cercon ht Dentin

love and Kiss

Incisals and custom stains Cercon ceram love and Cercon ceram Kiss

Example: The Multi-color concept Cercon ceram love

by Carsten Fischer

(Sirius News 01/2012)

PV

FV

PV

FV

Cercon ht mediumCercon ht light

Cercon ht white

3

Staining concept Cercon ht pre-coloured

Staining concept for the liquid technique

Cercon ht stains

Body-base and

Body-match

Example: The Multi-color concept Fully contoured

by Carsten Fischer (Sirius News 02/2011)

FC

FC

Cercon ht mediumCercon ht light

Cercon ht white

Cercon ceram love on Cercon htBasic build-up: Posterior bridge

4

Cercon ht medium framework

1

The high level of shade predictability and aesthetics already

becomes apparent in the basic build-up with love. To obtain the

Vita-shade A2, Cercon ht medium and the Cercon ht-Dentin A2

were chosen according to the shade assignment table. The

Cercon ht framework should feature a reduced anatomic con-

tour, respecting the minimum requirements for wall thickness

and connector dimensions.

The reduced aspects of the framework are built up in love ht-Dentin A2 (see work step 2)

Important notes

› When veneering a restoration

– whether fully or partially – the

framework must be selected

based on the requirements of

the build-up technique.

› Staining should generally be

performed before the build-up.

5

Dentin layering, buccal view After the first ceramic firingAdding love Incisal E2

2 43

Second ceramic firingCorrection with love ht-Dentin A2 and Incisal E2

Customized with Cercon stains

65 7

fully veneered

partial vestibular veneered

partial occlusal veneered

The laboratory work in this brochure was executed by Yamen Chaban, Technical Advisor, DeguDent.

Cercon ceram love on Cercon htHigh-end build-up: Anterior crowns

6

Cercon ht medium frameworks

1

Building the basic shape with love ht-Dentin A2

Transpa Clear TC for characterizing the mamelons, White Surface for whitish zones

Cutting back the dentin layer

3 54

Intensive Dentin 1 cervical, frameworks likely covered with Grey Inside

Use love to realize sophisticated aesthetic ideas.

Control value, chroma, translucency and light re-

flectivity. To obtain the Vita-shade A2, Cercon ht

medium and the Cercon ht-Dentin A2 were cho-

sen according to the shade assignment table.

The Cercon ht frameworks should feature a re-

duced anatomic contour, respecting the minimum

requirements for wall thickness.

2

7

Using silver powder to check and finalize the shape, structure and surface texture

Adding Opal Incisal OE 1 and Transpa red TR

Customized with Cercon stains after glaze firing

109 11

First ceramic firingCompleting the incisal area with love Incisal E2

Mesial line angle with Sky, distal line angle with Ocean and Standby at 1:1, cervical with Sunset and Standby at 1:2

Intensive Dentin 1 cervical, frameworks likely covered with Grey Inside

6 87

Cercon ceram Kiss on Cercon htBasic build-up: Posterior bridge

8

Thanks to a slightly greater translucency, Kiss offers technicians great creative leeway. To obtain the Vita-shade A3 for the basic build-up, choose Cercon ht medium and Cercon ht-Dentin Kiss A3 according to the shade assignment table. The minimum require-ments for wall thickness and connector dimensions as well as the reduced anatomic shape of the framework must be respected.

Occlusal view of the areas veneered with ht-Dentin A3 and Kiss Incisal S3. (see work step 3)

Cercon ht medium framework

1

Important notes

› When veneering a restoration

– whether fully or partially – the

framework must be selected

based on the requirements of

the build-up technique.

› Staining should generally be

performed before the build-up.

9

partial occlusal veneered

fully veneered

partial vestibular veneered

Dentin build-up with Kiss ht-Dentin A3

After the first ceramic firingBuilding up additional Kiss Incisal S3 in the incisal areas

2 43

Second ceramic firingCorrection with Kiss ht-Dentin A3 and Incisal S3

Customized with Cercon stains after glaze firing

65 7

Shaping the crown with Kiss ht- Dentin A3

Fluorescence

Kiss Clear TC to characterize the mamelons

Cutting back the dentin layer incisal

3 54

Kiss Power Chroma PC 5 and 2 cervical and approximally

The individual aesthetic and creative options of-

fered by Kiss are beautifully embodied by this

restoration. To obtain the Vita-shade A3, Cercon

ht medium and Kiss Cercon ht-Dentin A3 were

chosen according to the shade assignment

table.

The Cercon ht frameworks should feature a re-

duced anatomic contour, respecting the

minimum requirements for wall thickness.

Cercon ceram Kiss on Cercon htHigh-end build-up: Anterior crowns

10

2

Cercon ht medium frameworks

1

Second ceramic firing – Using silver powder to check and finalize the shape, structure and surface texture

The shape is finalized with Opal Incisals 1 and 2

Final restoration, customized with Cercon stains

109 11

First ceramic firing Building up the incisal areas with Kiss Incisal S3

Creating the mesial and distal line angles with Sky and Standby mixture 1:1. Additi-onal cervical build-up with Kiss ht-Dentin

11

76 8

Cercon ht medium frameworks

Cercon ht Body-base / Body-match stains on Cercon ht Full-contour staining technique

The new Cercon ht zirconia generation allows the fabri-

cation of fully contoured and stained frameworks. Using

the Cercon ht Body-base und Body-match stains together

with the traditional Cercon stains, you can use Cercon ht

light and medium to create your restorations in the ap-

propriate Vita-shade.

12

1

Characterizing with Cercon ht Body-match 1

Fully contoured crown customized with Cercon ht Body-base A-B

Final restauration after glaze firing

32 4

Fully contoured framework Cercon ht light

13

14

V-shadeCercon ht framework ht-Dentin Incisal

Cercon ht framework ht-Dentin Incisal

A 1 Light A1 1 Light A1 1

A 2 Medium A2 2 Medium A2 2

A 3 Medium A3 2 Medium A3 3

A 3.5 Medium A3,5 2 Medium A3,5 3

A 4 Medium A4 3 Medium A4 5

B 1 Light B1 1 Light B1 1

B 2 Light B2 1 Light B2 1

B 3 Medium B3 2 Medium B3 4

B 4 Medium B4 2 Medium B4 6

C1 Light C1 1 Light C1 1

C 2 Light C2 3 Light C2 5

C 3 Medium C3 3 Medium C3 5

C 4 Medium C4 3 Medium C4 6

D 2 Medium D2 2 Medium D2 2

D 3 Medium D3 2 Medium D3 4

D 4 Medium D4 3 Medium D4 4

Cercon ht Veneering- & Staining concept

The veneering concept with Cercon ceram love and Cercon ceram Kiss

14

PV

FV

Notes: The shade and appearance of highly translucent framework mate-rials are influenced by the shade of the underlying prepared tooth. In addition, non-vital and/or severely discoloured hard tissue or coloured cementing agents may further affect the aesthetic result.

Moreover, highly variable cross-sections of the framework will also have an impact on shade. These effects can be compensated for by applying suitable ceramic stains.

15

The staining concept with Cercon ht Body-base and Body-match stains

Notes: body base and stains (e.g. amber, taiga, pink) should be mixed with a spatula tip of glaze to ensure an even lustre of the restoration; no addi-tional glaze firing will be required.

When veneering a restoration – whether fully or partially – the framework must be selected based on the requirements of the build-up technique.Staining should generally be performed before the build-up.

15

* Mix materials as listed. The reference quantity is the small end of the scooper.

** If fully or partially veneered bridge elements are combined with fully contoured elements in one bridge, the Cercon ht shade must be selected as per the veneering concept table. This applies to love and Kiss in Vita shades A2 and C2.

V-shadeCercon ht framework Firing 1 Firing 2 Firing 3 Firing 4 Firing 5

A 1 Light Body-base A/B Body-match 1 – – –

A 2 Light** Body-base A/B Body-match 1 – – –

A 3 Medium Body-base A/B Body-match 1 Body-match 1 – –

A 3.5 Medium Body-base A/B Body-match 1 Body-match 1 – –

A 4 Medium Body-base A/B Body-match 1 Body-match 1 – –

B 2 Light Body-base A/B Body 3 – – –

B 3 Medium Body-base A/B Body 8 – – –

B 4 Medium Body-base A/B Body 7 Body 7 – –

C2 Medium** Body-base C/D Taiga Taiga – –

D2 Light Body-base C/D Body-match 2 Body-base C/D – –

D3 Medium Body-base C/D Body-base C/D Body-match 2 – –

D4 Medium Body-base C/D Body-base C/D Body-match 2 Body-match 2 –

The following shades can be obtained by mixing:

B1 Light Body-base A/B

3x Body-base A/B*

1x Pink*

1x Taiga*

– – –

C1 Light Body-base C/D

2x Body-base C/D*

1x Grau*

4x Taiga*

– – –

C3 Medium Body-base C/D

2x Body-base C/D*

1x Grau*

4x Taiga*

2x Taiga*

2x Body 7*

2x Taiga*

2x Body 7*–

C4 Medium Body-base C/D

2x Body-base C/D*

1x Grau*

4x Taiga*

2x Body-base C/D*

1x Grau*

4x Taiga*

2x Taiga*

2x Body 7*

3x Terra*

2x Body 7*

FC

Firing chartsGeneral firing recommendations (Veneering technique)

Cercon ceram love

Cercon ceram Kiss

16

BrandPreheating

°CDrying time

minHeating rate

°C/minFinal temp

°CHolding time

minVacuum

hPa

Longterm cooling

min

Dentin 1 450 5:00 55 900 1:30 50 –

Dentin 2 450 5:00 55 890 1:30 50 –

Glaze firing 450 5:00 55 880 1:00 – 6:00

Correction 450 5:00 55 760 1:00 50 6:00

Final-Shoulder (F-SM) 450 5:00 55 760 1:00 50 6:00

BrandPreheating

°CDrying time

minHeating rate

°C/minFinal temp

°CHolding time

minVacuum

hPa

Longterm cooling

min

Dentin 1 450 5:00 55 830 1:30 50 –

Dentin 2 450 5:00 55 820 1:30 50 –

Glaze firing 450 3:00 55 800 1:00 – 6:00

Correction (Final Kiss) 450 5:00 55 680 1:00 50 6:00

Final-Shoulder (F-SM) 450 5:00 55 680 1:00 50 6:00

Slow cooling is mandatory after the last firing; this includes correction firings of restorations after try-in. The firing tem-perature must be adapted to the number of units fired in the same cycle. Five to ten units require an increase by 5°C to 10°C; more than ten units require an in-crease by 10°C to 20°C. The values lis-ted here are intended for orientation only and should be regarded only as guideli-nes. Your firing results may differ. All fi-ring results depend on the performance

of the furnace used, which in turn de-pends on the make, model and age of the furnace. Therefore, the guideline va-lues will have to be adapted individually for each firing. We recommend running a test firing cycle to evaluate the perfor-mance of the furnace used. We have compiled and checked all values and other data with great care. However, we cannot be liable for your results under any circumstances.

Cercon stains – ht Body-base and ht Body-match

17

Pre-heating Closing Pre-heating time

Vacuum Heatingrate

Final temp

Holding temp

450° C 2:00 min 1:00 min off 55° C /min 800° C 1:20 min

More informations in the directions for use:

> Cercon ceram Kiss ht-Dentin

> Cercon ceram love ht-Dentin

> Cercon stains ht Body-base and ht Body-match

The directions for use are available on www.degudent.de (Downloads)

Cercon ht-Body-base Set

These stains developed for fully contoured crowns and bridges made of Cercon ht light and medium are characterized by two major benefits:

1. Obtain your Vita shade in combination with the appropriate Cercon ht material.

2. The stains were produced by a special procedure, therefor are very delicate and stable for easy application to the framework without pooling.

Ceramic sets

Cercon ceram love aesthetik-set

With the aesthetic set, you get the full run of your creativity for exciting aesthetic restorations using the love concept for high shade fidelity.

Cercon ceram love ht-Dentin set

The highly chromatic ht-Dentins let you benefit from the excel-lent translucency and aesthetic options offered by Cercon ht light and medium, achieving shade fidelity even in very thin layers. The aesthetic and basic sets complement the ht-Dentins for your masterly restorations.

Cercon ceram love Basic-set

The basic set already lets you realize a broad range of restorations with ceramic veneers. Supports the love concept for high shade fidelity and simple ap-plication.

18

Cercon staining set

For customizing fully contoured, partially veneered and fully veneered restorations. Can be used for Cercon ceram love and Cercon ceram Kiss and the corresponding ht-Dentins. Developed using a special technology to allow high-precision local application.

Ceramic sets

Cercon ceram Kiss ht-Dentin set

The Kiss ht-Dentins provide the required high chroma to reliably obtain your Vita shade even with thin layers of Cercon ht light and medium.

Cercon ceram Kiss set

Used together with the Kiss ht-Dentins, the Kiss set contains the necessary materials for you to master even the most taxing ceramic challenges.

19

DeguDent GmbHRodenbacher Chaussee 463457 Hanau-WolfgangGermanywww.degudent.com

Fascination Prosthetics

22

23

0/1

20

3/G

VD

La

st

rev

isio

n:

03

/20

12G

B