126 / 127

Non ea-

Centrifuges

LABOGENE 416 is a compact bench-top centrifuge with a maximum ca-pacity of 400 mL at a time. It has five versatile rotors, so you can choose the desired rotor, buckets and adaptors according to your application. With GRS-S-100-4 rotor and universal 100 mL buckets and diverse adap-tors, you can enjoy everyday laboratory work to its fullest. The immediate separation of 32 vacutainer samples or small tubes is also feasible with unique vacutainer buckets. An additional offering of microplate rotor ex-tends the 416’s application. It is furnished with unique air flow structure and anti-vibration structure. Its ergonomic design with intuitive control panel offers easiness in operation. The SOFT START/STOP function of 416 enables gentle acceleration and deceleration, which is effective for vibration-sensitive sample separation such as blood fractionation. LABO-GENE 416 centrifuge guarantees the highest test standards that you need for your daily work with industry-leading safety and quality.

· Commonly used in the fractionation of blood samples and simple precipitation of biological samples· A spearate button for “Soft” start/stop function to achieve very gentle acceleration and deceleration· Lid drop protection design allows easiness and safety when loading or unloading samples.· Automatic lid release and vivid end alarm for easy retrieval of sample· A large assortment of rotors, buckets and adaptors for microtubes and all sizes of tubes up to 100 mL· CE MDD-certified version also available (if required))

Features

1.4 Low-speed Centrifuges 416

For more information go to www.labogene.co.krORDER & INQURIES : +82 2 3471 6500 / + 82 42 824 7000 / info@bmskorea.co.kr

quid ut qui be

Technical Specifications

Ordering Information

Max. RPM/PCF Fixed Angle

Noise level (dependent on rotor)

Acc. time to max. speed

Dec. time from max. speed

ACC/DEC ramps

Power supply

Program memory

Power Requirement

Dimension (W x D x H)

Net weight

CE MARK

Max. Capacity Fixed Angle

Time control

RCF/RPM conversion

LZ-416

LZ-416M

Main Body

Rotors for 416

Buckets and Microplate Holders

GRS-S-15-6

GLB-15A-FA

GRS-S-50-4

GLB-15-15

GLB-15-50

GLB-c15-50

GLB-d15-50

GRS-S-100-4

GRS-S-mw-2

GRA-S-15-16A

4,000 rpm / 2,700 xg

≤56 dB

≤20 sec

≤25 sec

-

220~230 V, 60/50 Hz (110 V optional)

10

340 VA

375 x 480 x 260 mm

19.5 kg

Yes

16 x 15 mL

Timed <100 min or continuous

Yes

416, low-speed general centrifuge without rotor (220V, 50/60Hz)

416, low-speed general centrifuge without rotor (220V, 50/60Hz) - registered as medical device at MFDS

Six-wing swing 15 mL rotor of 416 for holding GLB-15-15

15 mL sleeve of angle rotors, GRA-G-15-24A, GRA-15-6A, GRA-S-15-16A and GRA-SR-15-24 for holding

15 mL round or conical tubes

Four-wing swing 50 mL rotor of 416 for holding GLB-15-50, GLB-c15-50, GLB-d15-50, GLB-dc15-50, GLB-50-50 and GLB-c50-50

15 mL bucket of swing rotor, GRS-S-15-6 and GRS-SR-15-6

15 mL bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

15 mL conical bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

2 x 15 mL bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

Four-wing swing 100 mL rotor of 416 holding bucket, GLB-10-8-100, GLB-bd15-100, GLB-bdc15-100, GLB-b50-100,

GLB-b100-100 and GLB-dc50-100

Two-wing swing rotor of 416 for holding microplates

An angle rotor of 416 including 16 of 15 mL Sleeve, GLB-15A-FA

Max. RPM/PCF Swing-out

Max. Capacity Swing-out

4,000 rpm / 2,826 xg

4 x 100 mL, 32 vacutainer tube, 4 MTPs

416

Cat. No. Description

Outstanding Features - SOFT start/stop- FND display- Imbalance cut-off

- Safety lid lock - Lid drop protection- Automatic lid release at completion

CONTINUED ON NEXT PAGE

128 / 129

Non ea-

GLB-50-50 50 mL bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

Centrifuges Ordering Information for 416

Rotors for 1730R

GLB-c50-50

GLB-bd15-100

GLB-bdc15-100

GLB-b50-100

GLB-b100-100

GLB-10-8-100

GLB-b100

GLB-dc15-50

50 mL conical bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

2 x 15 mL bucket of swing rotors, GRS-S-100-4, GRS-SR-100-4 & GRS-G-100-6 incl. cap, GLB-b100

2 x 15 mL conical bucket of swing rotors, GRS-S-100-4, GRS-SR-100-4 & GRS-G-100-6 incl. cap, GLB-b100

50 mL bucket of swing rotors, GRS-S-100-4, GRS-SR-100-4 & GRS-G-100-6 incl. cap, GLB-b100

100 mL bucket of swing rotors, GRS-S-100-4, GRS-SR-100-4 & GRS-G-100-6 incl. cap, GLB-b100

8 x 10 mL vacutainer of 10 mL bucket of swing rotor, GRS-S-100-4, GRS-SR-100-4 & GRS-G-100-6

Bucket cap of bucket GLB-bd15-100, GLB-bdc15-100, GLB-b50-100 and GLB-b100-100, autoclavable

2 x 15 mL conical bucket of swing rotor, GRS-S-50-4 and GRS-SR-50-4

Adaptors and Multi-tube Racks

Buckets and Microplate Holders

GAS-m0.5(2)

GAS-m0.2(2)

GAS-3(15)

GAS-3(10)

GAS-4(15)

GAS-4(10)

GAS-5(15)

GAS-15(50)

GAS-c15(50)

GAS-u15(50)

GAS-c50(50)

GAS-c15(b100)

GAS-50(b100)

GAS-c50(b100)

GAS-85(b100)

GAS-100(b100)

GAM-m2.0-6(b100)

GAM-7-5(b100)

GAM-10-5(b100)

GAM-15-3(100)

GAM-c15-3(100)

0.5 mL adaptor of microtube rotors

0.2 mL adaptor of microtube rotors

3 mL adaptor of 15 mL sleeve, GLB-15A-FA

3 mL adaptor of 10 mL sleeve, GLB-10-8-100

4 mL adaptor of 15 mL sleeve, GLB-15A-FA

4 mL adaptor of 10 mL sleeve, GLB-10-8-100

5 mL adaptor of 15 mL sleeve, GLB-15A-FA

15 mL adaptor of rotors, GRF-G/L-50-8 and GRF-SR-50-6

15 mL conical adaptor of rotors, GRF-G/L-50-8 and GRF-SR-50-6

15 mL round & conical adaptor of bucket GLB-50-50 & GLB-b50-100

50 mL conical adaptor of bucket GLB-50-50 & GLB-b50-100

15 mL conical adaptor of bucket GLB-b100-100

50 mL adaptor of bucket GLB-b100-100

50 mL conical adaptor for bucket GLB-b100-100

100 mL adaptor for bucket GLB-b100-100

85 mL adaptor for bucket GLB-b100-100

6 x 1.5/2.0 mL microtube multi-tube rack for bucket GLB-b100-100

5 x 7 mL multi-tube rack for bucket GLB-b100-100

5 x 10 mL multi-tube rack for bucket GLB-b100-100

3 x 15 mL multi-tube rack for bucket GLB-b100-100, not applicable with cap

3 x 15 mL conical multi-tube rack for bucket GLB-b100-100, not applicable with cap

1.4 Low-speed Centrifuges

For more information go to www.labogene.co.krORDER & INQURIES : +82 2 3471 6500 / + 82 42 824 7000 / info@bmskorea.co.kr

quid ut qui be

130 / 131

Non ea-

Fixed Angle Rotor : GRS�S�100�4

4 loadings 90o

Bucket bore (Ф x L, mm)

Tube

Tube rack

Radius (mm)

Max. RPM

Tube capacity (mL)

Cat. No.

Rack capacity (ea/4)

Hole dimension (Ф x L, mm)

1.5~2.0

6/24

11 x 39

GAM-m2.0-6(b100)

GAM-7-5(b100)

GAM-10-5(b100)

GAM-15-3(100)

GAM-c15-3(100)

GAS-c15(b100)

GAS-50(b100)

GAS-c50(b100)

GAS-85(b100)

GAS-100(b100)

2.6~7

5/20

13.5 x 60 16 x 60 17.5 x 105 17.2 x 106.5 17.2 x 106.5 29.5 x 95.9 30 x 100 38.5 x 96.3 44.2 x 93

4~10

5/20

9~15

3/12 3/12 1/4 1/4 1/4 1/4 1/4

15 mL conical 1008550 mL conical50mL15 mL conical

Max. RCF (g-force)

Max. height for tube fit (mm)

47 x 99

155.1

4,000

2,774

120 (w/ cap) / 130 (w/o cap)

Round 100 mL Bucket with CapGLB�b100�100

GLB-b100-100 includes cap.(b100) adaptors work fine with cap but (100) adaptors not.

1.4 Low-speed Centrifuges

Bucket bore (Ф x L, mm)

Tube

AdaptorRadius (mm)

Max. RPM

Tube capacity (mL)

Cat. No.

Hole dimension (Ф x L, mm)

15

GAS-u15(50)

17.3 x 87

15 mL conical 50 mL conical

GAS-c50(50)

29.5 x 17.5 –

50

50

–Max. RCF (g-force)

Max. height for tube fit (mm)

30.5 x 97

150.9

4,000

2,700

115 (w/ cap) / 125 (w/o cap)

Round 50 mL Bucket with CapGLB�b50�100

For more information go to www.labogene.co.krORDER & INQURIES : +82 2 3471 6500 / + 82 42 824 7000 / info@bmskorea.co.kr

quid ut qui be

Rotors for 416

Bucket bore (Ф x L, mm)

Bucket bore (Ф x L, mm)

Bucket bore (Ф x L, mm)

Bucket bore (Ф x L, mm)

Tube

Tube

Tube

Tube

Adaptor

Radius (mm)

Radius (mm)

Radius (mm)

Radius (mm)

Radius (mm)

Max. RPM

Max. RPM

Max. RPM

Max. RPM

Tube capacity (mL)

Bucket capacity (ea/4)

Tube capacity (mL)

Tube capacity (mL)

Tube capacity (mL)

Cat. No.

Max. RPM

Bucket capacity (ea/4)

Bucket capacity (ea/4)

Adaptor bore (Ф x L, mm)

Max. RCF (g-force)

Bucket capacity (ea/4)

3

8/32

GAS-3(10) GAS-5(10) -

4,000

2/8

2/8

13.2 x 58

121

2,164

2/8

5

8/32

4,000

13.2 x 82

146

2,612

-

155.1

2,774

10

8/32

None

4,000

Max. RCF (g-force)

Max. RCF (g-force)

Max. RCF (g-force)

Max. RCF (g-force)

Max. height for tube fit (mm)

Max. height for tube fit (mm)

Max. height for tube fit (mm)

Max. height for tube fit (mm)

17 x 98

17 x 98

16 x 89

17 x 102.5

150.9

155.1

155.1

155.1

4,000

4,000

4,000

4,000

2,700

2,774

2,774

2,774

123 (w/ cap) / 127 (w/o cap)

125

120

120

Dual Round 15 mL Bucket with CapGLB�bd15�100

Dual Conical 50 mL BucketGLB�dc50�100

Vacutainer 10 mL BucketGLB�10�8�100

Dual Round 100 mL Bucket with CapGLB�bdc15�100

15

50 mL conical

15 mL conical

132 / 133

Non ea-

Swing-out Rotor : GRS�S-50-4

4 loadings 90o

Bucket bore (Ф x L, mm)

Tube

AdaptorRadius (mm)

Max. RPM

Tube capacity (mL)

Cat. No.

Hole dimension (Ф x L, mm)

15

GAS-u15(50)

17.3 x 87

15 mL conical 50 mL conical

GAS-c50(50)

29.5 x 17.5 –

50

None

–Max. RCF (g-force)

Max. height for tube fit (mm)

30.5 x 91

150.9

4,000

2,700

125

Round 50 mL Bucket with CapGLB�50-50

Bucket bore (Ф x L, mm)

TubeRadius (mm)

Max. RPM

Tube capacity (mL)

Max. RCF (g-force)

Max. height for tube fit (mm)

29.5 x 91.5

150.9

4,000

2,700

125

Conical 15 mL BucketGLB�c50-50

50 mL conical

1.4 Low-speed Centrifuges

For more information go to www.labogene.co.krORDER & INQURIES : +82 2 3471 6500 / + 82 42 824 7000 / info@bmskorea.co.kr

quid ut qui be

Rotors for 416

Bucket bore (Ф x L, mm)

Bucket bore (Ф x L, mm)

Tube

TubeRadius (mm)

Radius (mm)

Max. RPM

Max. RPM

Tube capacity (mL)

Tube capacity (mL)

Bucket capacity (ea/4)

Bucket capacity (ea/4)

2/8

2/8

Max. RCF (g-force)

Max. RCF (g-force)

Max. height for tube fit (mm)

Max. height for tube fit (mm)

17 x 91.5

17 x 91.5

150.9

150.9

4,000

4,000

2,700

2,700

120

120

Dual Conical 15 mL BucketGLB�dc15-50

Dual Round 15 mL BucketGLB�d15-50

15

15 mL conical

Bucket bore (Ф x L, mm)

Bucket bore (Ф x L, mm)

Tube

Tube

Radius (mm)

Radius (mm)

Max. RPM

Max. RPM

Tube capacity (mL)

Tube capacity (mL)

Max. RCF (g-force)

Max. RCF (g-force)

Max. height for tube fit (mm)

Max. height for tube fit (mm)

17 x 93

17 x 93

150.9

150.9

4,000

4,000

2,700

2,700

125

120

Round 15 mL BucketGLB�15-50

Conical 15 mL BucketGLB�c15-50

15

15 mL conical

134 / 135

Non ea-

Swing-out Rotor : GRS-S-15-6

6 loadings 90o

Bucket bore (Ф x L, mm)

TubeRadius (mm)

Max. RPM

Tube capacity (mL)

Max. RCF (g-force)

Max. height for tube fit (mm)

17 x 93.8

158

4,000

2,826

125

Round 15 mL BucketGLB�15-15

10 15

1.4 Low-speed Centrifuges

For more information go to www.labogene.co.krORDER & INQURIES : +82 2 3471 6500 / + 82 42 824 7000 / info@bmskorea.co.kr

quid ut qui be

Rotors for 416

16 x 15 mL

Sleeve bore (Ф x L, mm)

Radius (mm)

Tube

Adaptor

45o

Hole Diameter (mm)

Max. RPM

Tube capacity (mL)

Adaptor bore (Ф x L, mm)

Radius (mm)

Cat. No.

Max. RPM

Max. RCF (g-force)

43

4,000

2,397 2,433 2,612 2,692 2,700 2,638

GAS-3(15) GAS-4(15) � �GAS-5(15) �

NoneNoneNone

13.5 x 61 13.5 x 65 13.5 x 85 � � �

134 136 146 150.5 151.5 147.5

10 155 50 mL conicalMax. height for tube fit (mm)

Max. RCF (g-force)

18

4,000

151.5

18 x 90

125 (120 for conical tube)

2,700

Angle RotorGRA-S-15-16A

Aluminum 15 mL SleeveGLB-15A-FA

Swing-out Rotor : GRS�S-mw-2

2 loadings 90o

Area Dimension (mm)

Max. height for microplate fit (mm)

88.5 x 130.3

35 1/2

111

4,000

1,986

MTP DWP

Plate

Plate capacity (mL)

Holder capacity (ea/2)

Radius (mm)

Max. RPM

Max. RCF (g-force)