CMCICMCI

Quality Construction ChemicalsCONSTRUCTION MATERIAL CHEMICAL INDUSTRIES P.O. Box 7137, Dammam 31462, Saudi ArabiaTel: 00966-3-8471450; Fax: 00966-3-8471575; Email: tech@cmci-sa.com Web: www.cmci-sa.com

CEMFIX

BONDING AGENT FORFIXING TILES

CEMFIX is a liquid rubber mortar additive. It ismixed with Portland cement and sand, on site, toproduce high strength thin set mortars. Thesemortars are recommended for interior and exterioruse over concrete and masonry surfaces. CEMFIXis suitable for applications which will be subject tocontinuous underwater immersion such asswimming pools, fountains and water storagetanks.CEMFIX is used for installing.l CERAMIC TILESl MOSAIC TILESl QUARRY TILESl NATURAL STONEl MARBLEl TERRAZZO TILESl GLASS MOSAIC TILESl THIN BRICKS

RECOMMENDED SURFACESCEMFIX is recommended for use over :l NEW & OLD CONCRETEl MASONRY SURFACESl GYPSUM PLASTERl CONCRETE BLOCKSl EXISTING CERAMIC TILESl CONCRETE SCREEDSl GYPSUM WALLBOARDl CONCRETE PLASTERl CALCIUM SILICATE BLOCKSl EXISTING TERRAZZO TILES

ADVANTAGESSUPERIOR ADHESION : CEMFIX has 400%greater bond strength than the 28 days requirementof ANSI A118.1FASTER INSTALLATION : Tiles may be fixedsooner.CHEMICAL RESISTANCE : More resistance thanPortland cement mortars. Resists urine, sugar,brine, milk and dilute chemical solution.SHOCK RESISTANT : Resists physical andthermal shock.EASY TO USE : CEMFIX mortar is plastic andworkable.VERSATILITY : One installation material for wallsand floors, porous tiles, vitrified tiles, quarry tiles,pavers and marble, interior and exterior. CEMFIXachieves full cure in desert heat or arctic cold.ECONOMICAL : Easy to spread and clean.WATER CLEANABLE : Cleans easily with water,while fresh.SAFE : Non-flammable and non-toxic duringstorage, mixing, application, and when cured.

CERTIFICATIONCEMFIX conforms to the requirements ofAmerican National Standard InstituteSpecification:ANSI A118.4 1976 - Latex Portland Cement Mortar.It is also meets and exceeds the water resistanceand bond strength requirements of :ANSI A136.1 - 1972 - Organic AdhesiveANSI A118.1 - 1972 - Dry Set Portland CementMortar

HOW TO USESurface Preparation : Substrate must be sound,clean, free of form oil, laitance, and curing,compounds. Remove any loose concrete and dust.Thoroughly dampen the substrate prior toapplication. Sweep off any standing water.Mixing - Mix 1 part Portland cement with 1 partsand and add CEMFIX to achieve desiredconsistency. 50 Kg. of Portland cement mixed with50 Kg. of sand will require approximately 20 litersof additive.Application - Apply mortar to the substrate usingthe proper trowel. Scrape mortar into good contactwith the substrate. Normal thickness of the mortaris approximately 3-6 mm. Do not apply morematerial than can be covered in 10-15 minutes.For large tiles and marble apply extra mortar tothe back of each piece to ensure completecoverage.Cleaning - Clean tools and the surface of thefinished work with water while mortar is fresh.

WORKING TIMEPotlife : CEMFIX will remain workable in the mixingcontainer for 4-5 hours in cool weather. In warmerconditions the pot life will be shorter.Open time - When applied with a trowel, the opentime will be approximately 30-40 minutes. Opentime will vary depending on ambient temperature.

Quality Construction ChemicalsCONSTRUCTION MATERIAL CHEMICAL INDUSTRIES P.O. Box 7137, Dammam 31462, Saudi ArabiaTel: 00966-3-8471450; Fax: 00966-3-8471575; Email: tech@cmci-sa.com Web: www.cmci-sa.com

CMCICMCI

PACKAGING :20 liter pails, 210 Liter drums.

AVAILABILITY :CEMTEC® Products are manufactured inDammam Saudi Arabia. They are available forimmediate delivery from local stockists anddistributors

LIMITATIONS :Do not apply over wood, laminates or resilientsurfaces.

COVERAGE

Description Coverage/Liter of CEMFIX

Wall Tile 1.5 – 1.75 M2

Ceramic Mosaics 2.0 – 2.25 M2

Quarry Tile 1.0 – 1.25 M2

Marble & Terrazzo Tiles . 75 – 1.0 M2

Slurry Bond Coat 2.0 – 2.25 M2

Tile, Pavers, Brick, Marble or StoneCEMTEC® CEMFIX (3-6 mm thick)

CEMTEC® Floor Grout with CEMTEC® CEMMIX

CEMTEC® Waterproofing membrance

DETAILS :