9
V I N Y L S I D I N G C O L L E C T I O N

CELLWOOD VINYL SIDING AND SOFFIT …sidinginnovations.com/.../vinyl-siding-brochures/Alcoa/CSCAT_pp1_9.pdf · Cellwood Vinyl Siding and Soffit products are designed for use in residential

Embed Size (px)

Citation preview

V I N Y L S I D I N G C O L L E C T I O N

CSCATP0401/C0401© 2004 Alcoa Home Exteriors, Inc.

CELLWOOD VINYL SIDING AND SOFFIT SPECIFICATIONS AND CONFORMANCE

Cellwood Vinyl Siding and Soffit products are designed for use in residential and light commercial applications.

FINISHCellwood Vinyl Siding and Soffit are produced from PVC compound containing quality color pigments to provide color throughout thickness of panel. Close control of color and gloss is maintained to provide for an attractive, weatherable surface. Textured vinyl panels are uniformly embossed to provide an attractive woodgrain pattern.

MANUFACTURING PHYSICALSSolid Vinyl Siding, Soffit and Accessories are extruded polyvinyl chloride (PVC) compound as defined in ASTM D3679, “Standard Specification for PVC Siding.” The cell classification as defined by ASTM D1784 is 13344-B.

Cellwood PVC resin meets or exceeds the properties listed here:Tensile strength (psi) 7,100 - 7,600Tensile modulus (psi) 360,00 - 400,000Specific gravity 1.39 - 1.49Hardness (Shore D) 76 ± 3Heat deflection under load 264 psi 170ºFIzod impact strength (ft.-lbs./in. of notch) 3.3Chemical resistance ExcellentCoefficient of linear expansion 2.9 (73.7) X 10-5

THICKNESSAll Cellwood Vinyl Siding and Soffit panels exceed requirements per ASTM D3679 section 4.2.

Siding Thickness (nominal)Dimensions™ .044" (1.12)Dimensions Beaded® .046" (1.17)Progressions® .042" (1.07)Evolutions® .040" (1.02)

Soffit Thickness (nominal)Triple 4" Vinyl Soffit .040" (1.02)Double 5" .046" (1.17)Beaded Soffit .040" (1.02)

Note: All measurements in ( ) are in millimeters (mm).

SOFFIT VENTILATION AREA(Free air space in sq. in./sq. ft.)

Triple 4" Full-Vent 5.87 sq. in. Triple 4" Center-Vent 1.96 sq. in.Double 5" Ventilated 7.53 sq. in.Beaded Ventilated 1.54 sq. in.

RELEVANT STANDARDS/CODESCellwood Vinyl Siding products meet or exceed the following standards and/or code approvals:

Industry Standards Building CodesASTM D284 (U.B.C. #52-2)ASTM D635

ASTM E84ASTM D3679BOCA 94-25ICBO 1478SBCCI 9623Metro Dade 99-0610.3Texas State Board of Insurance Ruling EC-27

Fire-Resistance RatingsASTM E84 ASTM D635Flame spread less than 20 Avg. time of burning less than 5 sec.Fuel contribution 0 Avg. length of burning 20 mmSmoke Density 400 ASTM D2843 (U.B.C. #52-2)

Smoke density 48

IMPORTANT FIRE SAFETY INFORMATIONExterior vinyl building materials require little maintenance for many years. Nevertheless, common sense dictates that builders and suppliers of vinyl products store, handle, and install vinyl materials in a manner that avoids damage to the product and/or structure. Owners and installers should take a few simple steps to protect vinyl building materials from fire.

To Home and Building Owners Rigid vinyl siding is made from organic materials and will melt or burn when exposed to a significant source of flame or heat. Building owners, occupants, and outside maintenance personnel should always take normal precautions to keep sources of fire, such as barbecues and combustible materials, dry leaves, mulch, and trash away from vinyl siding.

To the Building Trades, Specifiers, Professionals and Do-It-YourselfersWhen rigid vinyl siding is exposed to significant heat or flames, the vinyl will soften, sag, melt, or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment materials because many underlayment materials are made from organic materials that are combustible. You should ascertain the fire properties of underlayment materials prior to installation. All building materials should be installed in accordance with local, state, and federal building code and fire regulations.

For general information about vinyl siding products, contact the Vinyl Siding Institute, 1275 K St. NW, Washington, DC 20005-4006. Request brochures titled “Fire Properties” or “What Homeowners Want to Know.”

WARRANTYCellwood backs its Vinyl Siding and Soffit with a lifetime limited warranty. Many products also include hail coverage. Consult actual warranty certificates for complete coverage details.

Non-RatedWall

One-HourRating

Two-HourRating

Wall System

Any Conventional Construction

Any Conventional Construction

Any Conventional Construction

Interior Underlayment

1/2" Gypsum Board

1 Layer of 5/8" Gypsum

Board

2 Layers of 5/8" Gypsum

Board

ExteriorSheathing

Any Conventional

Materials

Must Include 1 Layer of 5/8" Gypsum Board

Must Include Two Layers of 5/8" Gypsum Board

Popular Residential Claddings*

Wood

Plywood

OSB

Hardboard

Steel

Aluminum

Vinyl

*Note: Fire-treated versions may also be available for some popular wood-based siding products

Wall Fire-Resistance Matrix

1590 Omega Drive • Pittsburgh, PA 15205 • 800-335-6701

Table of Contents

Introduction Page 2

Marketing Support Page 3

Vinyl Siding Collection

Dimensions™ Pages 4-5

Dimensions Beaded® Page 5

Progressions® Pages 6-7

Evolutions® Pages 8-9

Mounts Page 11-12

Vents Page 13

Vinyl Accessories

Vinyl Siding & Soffit Accessories Page 9

Corner Posts Page 14

Lineals & Casings Page 14

Color And Design Page 15

The Cellwood Vinyl Siding Collection provides homeowners with several product choices that complement any architectural style. And because our vinyl siding never needs painting or staining, you can achieve the look of real wood without the chipping, flaking and peeling that comes with it.

Cellwood quality begins with an unsurpassed manufacturing process – resulting in products made to rigid specifications using only the best materials. Our high-strength construction makes our vinyl siding among the most durable on the market, but most important, our authentic designs and realistic woodgrain finishes are offered in the colors and styles homeowners want most.

The Cellwood Vinyl Siding Collection includes: Dimensions, Dimensions Beaded, Progressions and Evolutions – that’s four distinct product lines, five unique profiles, 14 classic colors and four premium cedar colors; each designed to provide quality and beauty, while increasing the value of your customers’ homes.

And because Cellwood is a trusted brand of Alcoa, you can rest assured that all of the products we offer are constructed to exacting standards – ensuring superior durability and genuine beauty that will last for years to come.

800-335-6701

V I N Y L S I D I N G C O L L E C T I O N

152

® C O L O R A N D D E S I G N

Why Color is So ImportantWe live in a world of colors. Color adds life to everything we see. It defines shapes, affects proportions, expresses personality and even influences our mood. That’s why color is such an important choice when designing or refining your home’s exterior. The right combination of colors will help to accent architectural style and

increase aesthetic appeal. By understanding color relationships – knowing why a particular assortment of colors “works” – you are better prepared to make color decisions you will be happy with for years to come.

Our color professionals have carried out extensive color research over the last forty years – identifying and forecasting color trends. This research is behind our appealing palette of colors

for siding, trim, shutters and rain removal products. Whether you are trying to change the mood of a home, change a perception of size, add emphasis, create interest or achieve unity – our color combinations can work for you.

TrimColo

r

Shutt

erColor

Autumn Tan

White

Winestone

Siding Color

Painted TrimC

olor

Shutt

erColorSand

Cream

Spanish Moss

Siding Color

TrimColo

r

Shutt

erColorPewter

White

Blue

Siding Color

Painted TrimC

olor

Shutt

erColorChestnutChestnut

Green

Spanish Moss

Siding Color

Things to know to make color work for you:

• Bolder colors give your home a lively, more dramatic appearance.

• Softer, subdued tones create a more restful setting.

• To make a smaller home appear larger, use light coordinating colors of similar intensities.

• To make a larger home appear less massive, use dark, contrasting colors.

• The use of colors that contrast can make a home with simple straight lines become more eye-catching.

• Small homes look better with fewer colors.

• Larger, more ornate homes can handle a main color plus several accents.

• Consider your home’s orientation to the sun and shade. Colors look brighter under the glare of sun and darker in shade.

• Color adds personality to your home – make sure that your home exudes your personality through the choice of colors.

TrimColo

r

Shutt

erColorBayberry

White

Green

Siding Color

TrimColo

r

Shutt

erColorKhaki

Ivory

Black

Siding Color

TrimColo

r

Shutt

erColorBeige

Beige

PebblestoneClay

Siding Color

TrimColo

r

Shutt

erColorWicker

Cream

Dark Spruce

Siding Color

V I N Y L A C C E S S O R I E S

14 3

® M A R K E T I N G S U P P O R T

When completing an exterior renovation or building a new home, choose coordinating products from the family of brands offered by the Alcoa Retail Brands Group.

From Cellwood vinyl siding, shutters, Designer Accents, vents and mounts to Alumax metal products, our family now includes the wide range of choices necessary to tastefully outfit nearly every aspect of your home’s exterior. And because our brands are backed by Alcoa, you can be sure that every product we make is backed by a widely-recognized and respected industry leader.

Now more than ever, when you want to finish your home with style, you can count on the Cellwood and Alumax brand names for:

Vinyl SidingStandard and Custom ShuttersVinyl SoffitDentil MoldingsDecorative Corner PostsDoor Surround SystemsMantel SystemsJ-Block® MountsDryer VentsGable VentsLineals and Window CasingsAluminum Soffit and FasciaRain Removal SystemsGutter Protection Systems

DisplaysTurn Any Floor Space into Sales Space.Select from a variety of display methods to improve the effectiveness of your sales space, and feature the following products: Dimensions, Dimensions Beaded, Progressions and Evolutions.

Technical InformationBehind You Every Step of the Way.We provide you with all the necessary installation, warranty, and specification information required to finish the job right.

SamplesGive Them Just a Sample of What’s in Store.Product samples help to close the deal by providing actual product pieces, allowing homeowners to see the true appearance and color of the product.

Cellwood is committed to providing you with the materials you need to ensure a successful sales effort. From brochures to displays to advertising, we’re sure you’ll find what you need to sell Cellwood brand products.

Electronic Advertising KitPersonalized Advertising To Go!Create your own advertising with our helpful and pre-designed templates, photography, logos, and more.

Product BrochuresOur Brochures Help Tell the Story.An assortment of brochures is available to highlight features and benefits of the entire Cellwood product lines.

Free-standing unit can display one product up to

four products

Wall mount display for limited space

LIN3542031/2" Window & Door Casing LinealLength 20'4 Pcs./Ctn.

WCT062 1/2" WideWindow Casing Trim - 3/4"Nominal .040" ThickLength: 12'6"20 Pcs./Ctn.

WCNCSSNew Construction Window & Door Casing StarterLength 12'6"40 Pcs./Ctn.Available in white only

WCRRSSRemodeling Window & Door Casing StarterLength 12'6"40 Pcs./Ctn.Available in white only

LIN5045" Corner LinealLength 20'4 Pcs./Ctn.

LINF5045" Fluted Corner LinealLength 20'4 Pcs./Ctn.Available in white only

LINQRSS4Corner Starter & InsertLength 20'4 Pcs./Ctn.

15/16"

1/2"13/4"

9/16"

5"

3/4"

13/4"

9/16"1"

15/16"

1/2"

5"

3/4"

11/2"

19/16"

1/2"

9/16"

13/4"

9/16"1"

15/16"

1/2"

31/2"

3/4"

31/2" 21/2"

3/4" 1/2"

9/16"

19/16"

5/8"

1"

21/32"

3/4"

Lineals & Window CasingsHighlight Your Style with Distinctive Details.• Multiple design options to suit any

architectural style• Low-gloss, matte finish never

needs painting• Made from high-impact,

fade-resistant vinyl• Available in white, ivory, sand,

khaki, and pewter

Decorative Corner PostsAdd Extra Architectural Interest.• Made from a high-impact, fade-resistant vinyl • Duplicate the look of authentic corner board framing without the maintenance• Subtle matte finish• Looks like wood but easier to maintain – no cracking, splitting, or warping• Unique fastening system for brick or siding• Available in white, ivory, sand, khaki and pewter

3/4"51/2"

2"

TF0P55Traditional 51/2"Outside Corner Post with Foam InsertLength: 20'4 Pcs./Ctn.

BAY0P06Bay Corner 3/4"Nominal .042" ThickLength: 10'10 Pcs./Ctn.

2"

2"

3/4"

FF0P55Fluted 51/2"Outside Corner Post with Foam InsertLength: 20'4 Pcs./Ctn.

2"

3/4"51/2"

81/2"

71/2"

47/8"

47/8"

123/4"

73/4"

83/4"

43/4"

10" LONG TUBE

4" DIAMETER

V I N Y L S I D I N G C O L L E C T I O N V E N T S

13

®

4

Classic Colors

White Ivory Beige

Pewter

Sand

Slate Blue

AutumnTan

KhakiWicker

NantucketGray

Bayberry

Mist Stone Gray

Almond

Color clear-through formulation means scratches and nicks won’t show.

NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation.

Double 4" DM40 DimensionsDouble 4"Nominal .044" ThickLength: 12' 6"

Double 41/2" Dutch LapDMD45 DimensionsDouble 41/2"Nominal .044" ThickLength: 12' 1"

Longer LastingFor enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics. Without

GELOY resinWith

GELOY resin

®GELOY is a registered trademark of General Electric Company

Air Vent (Foundation Vent)® (Patent # 5,293,920)The two-piece Air Vent is used for cross-ventilation of garages, foundations, and range hoods. Design allows for open or closed flaps. The molded mesh helps prevent insect intrusion.

Product Code: AIRVENT (150)Net Free Area: 19 square inchesSurface Dimensions: 7" x 11"Flange Dimensions: 73/4" x 123/4"J-Channel I.D.: 3/4" adjusts to 11/4"

Closed Position

Open Position

Installed

Intake LouverThe Intake Louver is designed to be used with the Louvered Exhaust Vent when constant airflow is required. Primarily used for high-efficiency furnaces, fireplaces, and bathroom eave exhausts.

Product Code: INTAKE (190)Size: 45/8" H x 45/8" W x 13/8" DNet Free Area: 5.5 square inches

Installed

Louvered Exhaust VentThe Louvered Exhaust Vent is used to vent dryers and bathroom exhaust fans. The unique design includes a built-in grid to prevent bird intrusion and a 10" long metal tube that can be used for extra-thick walls. A 4" to 3" diameter reducer is also available.

Product Code: EXVENT (130)Surface Dimensions: 7" x 7"Flange Dimensions: 81/2" x 71/2"J-Channel I.D.: 3/4" adjusts to 11/4"

Tube Length: 10"Tube Diameter: 4"Reducers Available: 4" to 3"

Installed

Hooded Exhaust Vent• Snap-on installation• Built-in grate keeps animals out

Hooded Exhaust Vent

6 7/8"

6 7/8"4"

65/8"

6 5/8"

Product Code: DRYERHOOD3/4" Siding Receiver; 1" DepthNeutral Base

Vent

Trusted for years by both consumers and contractors alike, Cellwood is continually looking for opportunities to improve our products. Now, in addition to the authentic look of wood without the maintenance, our Dimensions premium siding offers these features:• Folded Nail Hem – withstands hurricane force winds• Full, 5/8" Profile Height – for realistic shadow lines and

greater panel rigidity• Oversized Lock Mechanism – stronger, positive locking action

and greater panel rigidity• .044 Thickness – for higher impact resistance• Authentic Cedar Texture – for the authentic look of real wood• Full-Length Return – for more secure locking• Limited Lifetime WarrantySpend less time maintaining your home and more time doing the things you want to do with the convenience and beauty of Dimensions premium vinyl siding.

45/8"

45/8"

4"

8"

8"

71/2"

71/2"

Soffit IntakeThe Soffit Intake provides necessary air movement through the attic and roof system to remove moist air with fresh air. Can be used with bathroom and kitchen exhausts.

Product Code: INTVENTSurface Dimension: 8" X 8"Flange Dimensions: 7 1/2" X 7 1/2"Net Free Area: 9.2 square inches

M O U N T S V I N Y L S I D I N G C O L L E C T I O N

5

®

RealisticWoodgrain Texture

Authentic beaded profile creates the appearance of hand-crafted wood clapboard.

BeadedDMB65 DimensionsBeaded 61/2"Nominal .046" ThickLength: 12' 4"

Folded Nail Hem–provides stronger, more secure installation than Standard Nail Hem shown below

.044" Thickness

Full 5/8" Profile Height– panels hang straighter and are more rigid than standard vinyl siding panels

Oversized Lock Mechanism– provides stronger positive locking action

Full-Length Return–so panels don’t come unlocked

Full-Size Lock–provides stronger, more secure installation

.046" Thickness

Full-Length Return–so panels don’t come unlocked

Classic Colors

White Ivory

WickerAutumnTan

Pewter

Almond

Color clear-through formulation means scratches and nicks won’t show.

NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation.

12

Create a Unique Style

Chestnut SpruceBlue

JuniperWeatheredAsh

StandardNail Hem

Mini J-Block®

Mounting BlocksThe Mini J-Block Mounting Blocks are designed to mount small accessories such as doorbells and electrical outlet receptacles.

• Compatible with all siding profiles• Creates a low-profile, finished look• Rich, textured appearance accented

by routered edge• Available in over 100 colors – and color

is molded through to ensure fade resistance• Lifetime limited warranty

Product Code: MBLOCK (025)Surface Dimensions: 6" x 43/8"Flange Dimensions: 67/8" x 51/4"J-Channel I.D.: 3/4" adjusts to 11/4"KnockoutsRound: 11/8" DiameterRectangle: 23/8" x 33/4"

Doorbell Buttons Electrical Outlet Receptacles

Meter Base J-Block® The Meter Base J-Block is designed to mount large accessories such as hose racks and electric meter bases.

• Compatible with all siding profiles• Available in over 100 colors – and color is molded through to ensure fade resistance• Lifetime limited warranty

Product Code: METER (140)Surface Dimensions: 161/2" x 151/2"Flange Dimensions: 181/2" x 16 3/4"J-Channel I.D.: 3/4"

Hose Racks Electric Meter Bases

E-Z Block™ Surface MountsThe one-piece design can be used after siding installation to mount all types of accessories. Cellwood offers sizes to fit Double 4, Double 5, Dutch Lap and Triple 3 siding profiles.

• Available in square or octagon

• Compatible with all siding profiles• Creates a low-profile, finished look• Rich, textured appearance accented

by routered edge• Available in over 100 colors – and color

is molded through to ensure fade resistance• Lifetime limited warranty

Light Fixtures Water Faucets*

Surface Dimensions: 6 3/4" x 63/4" Projection: 3/4"Knockouts Round: 1" DiameterRectangle: 23/8" x 33/4"

E-Z Block

*Octagon block specifications not shown

New Cedar ColorsFew woods can compare to the warmth and beauty of cedar. But like any other wood product, there’s the maintenance that comes with it. Our new cedar colors employ an exclusive manufacturing process using Kynar 500® along with multiple layers of cedar

graining and shading for superior fade resistance, remarkable texturing, and rich colors. But most important, because it’s a quality Cellwood vinyl product, you’ll never have to paint it, stain it, or replace it due to mold or wood-boring insects.• 25% less expensive than real cedar• Resists cracking, splitting, and shattering• Available in Double 4" and Dutch Lap 41/2" profiles• Four rich cedar colors to choose from

43/8"

16 3/4"

3/4"

16 1/2"

151/2"

11/16"

18 1/2"

63/4"

63/4"

23/8"

33/4"

23/8"

33/4"

6"

11/8"Diameter

67/8"

51/4"

Kynar 500® Finish (clear coat)

Print Coat 1 (grains/ticking)

Print Coat 2 (shading/undertones)

Thermal Mechanical Weld Coat 1

Thermal Mechanical Weld Coat 2

Solid Vinyl Substrate

V I N Y L S I D I N G C O L L E C T I O N M O U N T S

11

®

Double 4" PG40 ProgressionsDouble 4"Nominal .042" ThickLength: 12' 6"

Double 5" PG50 ProgressionsDouble 5"Nominal .042" ThickLength: 12'

Double 41/2" Dutch LapPGD45 ProgressionsDouble 41/2"Nominal .042" ThickLength: 12' 1"

Triple 3"PGT3 ProgressionsTriple 3" SmoothNominal .042" ThickLength: 12' 1"

®

6

With Progressions® vinyl siding, you get the beauty of wood siding without the work and maintenance. The durable construction and low-gloss heavy woodgrain texture combine to set the standard for quality and beauty, while increasing the value of your home.

• Never needs painting or staining, so chipping, flaking, and peeling are things of the past

• Does not absorb water, which eliminates warping, cracking, splitting, and rotting

• Resistant to fungus, mildew, and wood-boring insects

• Looks better longer by resisting impact, weather extremes, pollutants, and UV light

• Lifetime limited warranty

Classic Colors

White Ivory Beige

Pewter

Sand

Slate Blue

AutumnTan

KhakiWicker

NantucketGray

Bayberry

Mist Stone Gray

Almond

Color clear-through formulation means scratches and nicks won’t show.

NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation.

J-Block® Mounting Blocks (Patent # 4,726,152)The J-Block mounting blocks provide multiple uses, including the ability to easily and attractively mount light fixtures and receptacles.

• Compatible with all siding profiles• Creates a low-profile, finished look• Rich, textured appearance accented by routered edge• Available in over 100 colors – and color is molded through

to ensure fade resistance• Lifetime limited warranty

Surface Dimensions: 7" x 7"Flange Dimensions: 81/2" x 71/2"J-Channel I.D.: 3/4" adjusts to 11/4"KnockoutsRound: 4" DiameterRectangle: 23/8" x 33/4"

Light Fixtures Receptacles

Fixure Mount

Product Code:Mounting Block BLOCK (020)

8"

7 1/8"

81/8"

7"

FMOUNTSNB3/4" Siding Receiver; 1" Depth

Large J-Block® Mounting BlocksThe Large J-Block Mounting Blocks are designed to mount larger accessories such as large light fixtures, house numbers, and mailboxes.

• Compatible with all siding profiles• Creates a low-profile, finished look• Rich, textured appearance accented

by routered edge• Available in over 100 colors – and color

is molded through to ensure fade resistance• Lifetime limited warranty

Product Code: FMBLOCK (027)Surface Dimensions: 7" x 11"Flange Dimensions: 73/4" x 123/4"J-Channel I.D.: 3/4" adjusts to 11/4"KnockoutsRound: 4" Diameter

Large Light Fixtures

UL Block

MailboxesHouse Numbers

Recess J-Block® Mounting Blocks(Patent #5,526,619)The patented hinge allows for ease of installation without removal of electrical receptacles and water faucets.

• Compatible with all siding profiles• Available in over 100 colors – and color is

molded through to ensure fade resistance• Lifetime limited warranty

Product Code: MBLOCKR (026)Surface Dimensions: 51/4" x 7"Flange Dimensions: 57/8" x 71/2"J-Channel I.D.: 3/4" adjusts to 11/4"KnockoutsRectangle: 21/4" x 37/8"Electrical Outlet Receptacles

33/4"

23/8"

11"

7"

4" Diameter

12 3/4"

57/8"

7/8"

51/4"

21/4" x 37/8"KNOCKOUT

51/4"

31/8"

47/8"

7"

71/2"

35/8"

2 1/4"

31/2"

23/8"

81/8"

71/8"

7"

8"

73/4"

81/2"

4" Diameter

71/2"

7"

7"

V I N Y L S O F F I T V I N Y L S I D I N G C O L L E C T I O N

7

®

10

Full-Size Lock–provides stronger, more secure installation

.042" Thickness

RealisticWoodgrain Texture

Smooth Triple 3" Surface

Full 1/2" Profile Height– panels hang straighter and are more rigid than standard vinyl siding panels

Full-Length Return–so panels don’t come unlocked

Longer LastingFor enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics.

WithoutGELOY resin

WithGELOY resin

®GELOY is a registered trademark of General Electric Company

All Cellwood products undergo rigorous testing, certification, and quality control.

Premium Vinyl SoffitComplete the job with vinyl soffit that is available in matching colors and constructed to the same exacting standards as our vinyl siding.• Can be used as a soffit, vertical siding, or wainscoting• Ideal for use on porch ceilings and carports• Panels held securely in place with specially designed

locking system• Low-gloss finish

12"4" VST4N

Triple 4" Premium Soffit Non-Ventilated PanelNominal .040" ThickFinish: MatteLength: 12'Available in all vinyl siding colors (Warranted for sidewall use)

VST4FVTriple 4" Premium Soffit Full-Ventilated PanelNominal .040" ThickFinish: Matte5.87 Sq. In. N.F.A./Sq. Ft.Length: 12'Available in all vinyl siding colors

VST4CVTriple 4" Premium Soffit Center-Ventilated PanelNominal .040" ThickFinish: Matte1.96 Sq. In. N.F.A./Sq. Ft.Length: 12'Available in white only

VSB223NNon-Ventilated Soffit/WainscotNominal .040" ThickFinish: MatteLength: 12'6"Available in white, ivory, beige, sand, autumn tan, pewter, and khaki (Warranted for sidewall use)

VSB223VCellwood 8" Ventilated SoffitNominal .040" ThickFinish: Matte1.54 Sq. In. N.F.A./Sq. Ft.Length: 12'6"Available in white, ivory, beige, sand, autumn tan, pewter, and khaki

VSD5NDouble 5" Premium SoffitNon-Ventilated PanelNominal .046" ThickFinish: Brushed7.53 Sq. In. N.F.A./Sq. Ft.Length: 12'Available in all vinyl siding colors(Warranted for sidewall use)

5" 5"10"

22/3" 22/3" 22/3"8"

VSD5FVDouble 5" Premium SoffitVentilated PanelNominal .046" ThickFinish: Brushed7.53 Sq. In. N.F.A./Sq. Ft.Length: 12'Available in all vinyl siding colors

5/8"

12"4"

5/8"

12"4"

5/8"

5/8"

5" 5"10"

5/8"

3/8"

22/3" 22/3" 22/3"8"

3/8"

V I N Y L S I D I N G C O L L E C T I O N V I N Y L S I D I N G C O L L E C T I O N®

8 9

®

Double 4" EL40 EvolutionsDouble 4"Nominal .040" ThickLength: 12' 6"

Double 5" EL50 EvolutionsDouble 5"Nominal .040" ThickLength: 12'

Double 41/2" Dutch LapELD45 EvolutionsDouble 41/2"Nominal .040" ThickLength: 12' 1"

Evolutions® vinyl siding is designed to provide the beauty of wood siding in a low-maintenance exterior.The various profiles and durable construction are just the beginning of the beauty and value Evolutions adds to your home.• Never needs painting or staining, so chipping, flaking,

and peeling are things of the past• Does not absorb water, which eliminates warping, cracking,

splitting, and rotting• Resistant to fungus, mildew, and wood-boring insects• Looks better longer by resisting impact, weather extremes,

pollutants, and UV light• Lifetime limited warranty

White Ivory Beige

Pewter

Sand

Slate Blue

AutumnTan

KhakiWicker

NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation.

Classic ColorsColor clear-through formulation means scratches and nicks won’t show.

.040" Thickness

Full-SizeLock–providesstronger,more secureinstallation

COMPETITORCELLWOOD

Full-Length Return–so panels don’t come unlocked

COMPETITORCELLWOOD

Full 1/2" Profile Height– increases rigidity, so panels will hang straighter

3/8"

COMPETITOR

1/2"

CELLWOOD

RealisticWoodgrain Texture

Longer LastingFor enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics.

WithoutGELOY resin

WithGELOY resin

®GELOY is a registered trademark of General Electric Company

3/4"11/2"

2"

3/4"

3/4"11/2"

5/8"

1/4"

23/4"

21/2"

13/4"5/8"

3/4"

VS12Starter Strip VinylNominal .053" ThickLength: 12' 6"Available in white only

VOCP58NUniversal Outside Corner Post - 5/8"Nominal .046" ThickLength: 10'Available in all vinyl siding colors

VICP345Inside Corner Post - 3/4"Nominal .042" ThickLength: 10'Available in all vinyl siding colors

VFC58F-Channel - 5/8"Nominal .042" ThickLength: 12' 6"Available in all vinyl siding colors

VFT20Finish TrimNominal .056" ThickLength: 12' 6"Available in all vinyl siding colors

VJC58All Purpose J-Channel - 5/8"Nominal .040" ThickLength: 12' 6"Available in all vinyl siding colors

AVS12Starter Strip Aluminum (Spring Style)Nominal .019" ThickLength: 12' 6"Available in mill finish only

Vinyl Siding & Soffit Accessories

NOTE: Accessories are available in a variety of popular colors.

11/2"

3"

5/8"

1/4"

VJCB38Beaded J-Channel- 3/8"Nominal .040" ThickLength: 12' 6"Available in white, ivory, beige, sand, autumn tan,pewter, and khaki

3/8"

23/8"13/8"

V I N Y L S I D I N G C O L L E C T I O N V I N Y L S I D I N G C O L L E C T I O N®

8 9

®

Double 4" EL40 EvolutionsDouble 4"Nominal .040" ThickLength: 12' 6"

Double 5" EL50 EvolutionsDouble 5"Nominal .040" ThickLength: 12'

Double 41/2" Dutch LapELD45 EvolutionsDouble 41/2"Nominal .040" ThickLength: 12' 1"

Evolutions® vinyl siding is designed to provide the beauty of wood siding in a low-maintenance exterior.The various profiles and durable construction are just the beginning of the beauty and value Evolutions adds to your home.• Never needs painting or staining, so chipping, flaking,

and peeling are things of the past• Does not absorb water, which eliminates warping, cracking,

splitting, and rotting• Resistant to fungus, mildew, and wood-boring insects• Looks better longer by resisting impact, weather extremes,

pollutants, and UV light• Lifetime limited warranty

White Ivory Beige

Pewter

Sand

Slate Blue

AutumnTan

KhakiWicker

NOTE: Colors shown are mechanically produced and may vary from actual product. Please refer to the actual product sample for true color representation.

Classic ColorsColor clear-through formulation means scratches and nicks won’t show.

.040" Thickness

Full-SizeLock–providesstronger,more secureinstallation

COMPETITORCELLWOOD

Full-Length Return–so panels don’t come unlocked

COMPETITORCELLWOOD

Full 1/2" Profile Height– increases rigidity, so panels will hang straighter

3/8"

COMPETITOR

1/2"

CELLWOOD

RealisticWoodgrain Texture

Longer LastingFor enhanced weatherability and resistance to fading, darker colors use quality GELOY® resins manufactured by GE Plastics.

WithoutGELOY resin

WithGELOY resin

®GELOY is a registered trademark of General Electric Company

3/4"11/2"

2"

3/4"

3/4"11/2"

5/8"

1/4"

23/4"

21/2"

13/4"5/8"

3/4"

VS12Starter Strip VinylNominal .053" ThickLength: 12' 6"Available in white only

VOCP58NUniversal Outside Corner Post - 5/8"Nominal .046" ThickLength: 10'Available in all vinyl siding colors

VICP345Inside Corner Post - 3/4"Nominal .042" ThickLength: 10'Available in all vinyl siding colors

VFC58F-Channel - 5/8"Nominal .042" ThickLength: 12' 6"Available in all vinyl siding colors

VFT20Finish TrimNominal .056" ThickLength: 12' 6"Available in all vinyl siding colors

VJC58All Purpose J-Channel - 5/8"Nominal .040" ThickLength: 12' 6"Available in all vinyl siding colors

AVS12Starter Strip Aluminum (Spring Style)Nominal .019" ThickLength: 12' 6"Available in mill finish only

Vinyl Siding & Soffit Accessories

NOTE: Accessories are available in a variety of popular colors.

11/2"

3"

5/8"

1/4"

VJCB38Beaded J-Channel- 3/8"Nominal .040" ThickLength: 12' 6"Available in white, ivory, beige, sand, autumn tan,pewter, and khaki

3/8"

23/8"13/8"