Cellular telecom networks

Cellular telecom networks

Coaxial Antenna Line

2

Introduction

Waterproofing kits

HYPERCELL® Products offer all passive components between BTS and antennas.

HYPERCELL® ensures a perfect mechanical and electrical integrity between radio equipments.Surge arrestors

Feeders

Jumpers

Connectors

Clamps

Grounding kits

*LTE is a trade mark of ETSI

Cellular telecom networks

Ultra Low Loss 50 Ohms Corrugated cables

3

Inner conductor•Smooth or Corrugated Copper tube

Dielectric•Ultra Low-Loss dielectric made

of foamed polyethylene

Outer conductor• Corrugated outer conductor

Outer jacket• Black polyethylene jacket

All our cables are 100% factory controlled!

Cellular telecom networks

4

Connectors

Interface• Available in DIN 7/16 and N, in straight and

elbow type

Reduce inventory OPEX•New plating fitting with most of cables

Performances• Excellent VSWR• Low intermodulation ensured

Easy to use• 2-piece connectors. Fast, easy

and reliable assembly• Preparation tool available

Waterproofness• IP 68

Cellular telecom networks

Jumpers

5

Interface• Available in DIN 7/16 and N,

in straight and elbow type

Flexibility• Low bending moment• Available in flexible, super flexible

and ultra flexible

Jacket• Polyethylene (PE)• Indoor / Outdoor LSOH Fire-retardant

Performances• Soldered connectors to ensure low VSWR and

passive intermodulation

Waterproofness• IP 68

All our cables are 100% factory controlled!

Cellular telecom networks

6

Surge arrestors

QuarterwavePower • Up to 2500 W

Discharge• Current discharge up to 100 kA

Maintenance•Maintenance free

Gas TubePower • Up to 1000 W

Discharge• Current discharge up to 20 kA

Bandwidth• Broadband

Cellular telecom networks

7

Grounding kits

Type• Framework type for an integrated solution

Compatibility• Fit both copper and aluminium cables

Easy to install• Easy, fast and reliable installation

Size•Ground cable available

in 0.6m and 1m length

Environment• IP 68 waterproofness thanks

to an integrated vulcanizing rubber• Corrosion resistant

Cellular telecom networks

8

Clamps and hangers

Fonction• Support cables every meter. Avoid any risk

of slipperage or longitudinual deformation:- Cable weight- Wind velocity- Gusts- Induced turbulences- Vibrations of tower

In severe conditions• In some critical areas, ice accumulation will

increase the overall loading. In such case, a reducing in the hanger spacing is necessary

Cellular telecom networks

9

Waterproofing kit

Components• Self vulcanizing rubber tape, wrapped

around the connections, then recovered with a PVC tape to protect against mechanical damage and UV rays

Protection• Protects IP 67 connectors and jumpers

to antenna interfaces from moisture or water ingress

IP 68 connectors do not need using any waterproofing kit

10

HYPERCELL®

*LTE is a trade mark of ETSI

Thanks for your attention !

Visit our website www.acome.com