Embed Size (px)
Citation preview
Alginate sulfate-nanocellulose bioinks for cartilage bioprinting applications. Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi-Wong, M. (2017). Annals of Biomedical Engineering https://doi.org/10.1007/s10439-016-1704-5
Publications
1
Optimization of extrusion based ceramic 3D printing process for complex bony designs.Kiran, R. U., Malferrari, S., Van Haver, A., Verstreken, F., Rath, S. N., & Kalaskar, D. M. (2018)Materials & Design
High-resolution patterned cellular constructs by droplet-based 3D printing.Popov, A., Malferrari, S., & Kalaskar, D. M. (2017)Scientific reports
Combination of CDODA-Me, a glycyrrhetinic acid derivative, and Erlotinib overcomes chemo-resistance in NSCLC PDX spheroids and 3D bio-printed cells.Mondal, A., Gebeyehu, A., Nottingham, E., Bagde, A., Ramakrishnan, S., Rishi, A. K., & Singh, M. (2017).AACR, Cancer Research.
3D bio-printing of human hepatic tissue using human liver extracellular matrix as tissue-specificbioink.Safarikia, S., Cardinale, V., Carpino, G., Costantini, D., Matteo, S. D., Nevi, L., ... & Alvaro, D. (2018). Journal of Hepatology
https://doi.org/10.1016/j.matdes.2018.11.054
https://doi.org/10.1038/s41598-017-06358-x
https://doi.org/doi:10.1158/1538-7445.AM2017-2072
https://doi.org/10.1016/S0168-8278(18)30331-3
3D freeform printing of silk fibroin.Rodriguez, M. J., Dixon, T. A., Cohen, E., Huang, W., Omenetto, F. G., & Kaplan, D. L. (2018).Acta biomaterialia https://doi.org/10.1016/j.actbio.2018.02.035
Engineering a 3D-Bioprinted Model of Human Heart Valve Disease Using Nanoindentation-Based Biomechanics.van der Valk, D. C., van der Ven, C. F., Blaser, M. C., Grolman, J. M., Wu, P. J., Fenton, O. S., ... & Ha, A. H. (2018).Nanomaterials https://dx.doi.org/10.3390/nano8050296
Publications
2
Parameter optimization for 3D bioprinting of hydrogels. Webb, B., & Doyle, B. J. (2017).Bioprinting
A study on degradation behavior of 3D printed gellan gum scaffolds. Yu, I., Kaonis, S., & Chen, R. (2017).Procedia CIRP
Cartilage tissue engineering by the 3D bioprinting of iPS cells in a nanocellulose/alginate bioink.Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., ... & Lindahl, A. (2017).Scientific reports
A perspective on the physical, mechanical and biological specifications of bioinks and the development of functional tissues in 3D bioprinting. Williams, D., Thayer, P., Martinez, H., Gatenholm, E., & Khademhosseini, A. (2018).Bioprinting
Developing Microfluidic Sensing Devices Using 3D Printing. Rusling, J. F. (2018).ACS sensors
https://doi.org/10.1016/j.bprint.2017.09.001
https://doi.org/10.1016/j.procir.2017.04.020
https://doi.org/10.1038/s41598-017-00690-y
https://doi.org/10.1016
https://doi.org/10.1021/acssensors.8b00079
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo.Apelgren, P., Amoroso, M., Lindahl, A., Brantsing, C., Rotter, N., Gatenholm, P., & Kölby, L. (2017).PloS One https://doi.org/10.1371/journal.pone.0189428
Publications
3
Controlling adult stem cell behavior using nanodiamond-reinforced hydrogel: Implication in bone regeneration therapy. Pacelli, S., Maloney, R., Chakravarti, A. R., Whitlow, J., Basu, S., Modaresi, S., ... & Paul, A. (2017).Scientific Reports
Guidelines for standardization of bioprinting: a systematic study of process parameters and their effect on bioprinted structures. Kesti, M., Fisch, P., Pensalfini, M., Mazza, E., & Zenobi-Wong, M. (2016).BioNanoMaterials
In vivo chondrogenesis in 3D bioprinted human cell-laden hydrogel constructs.Möller, T., Amoroso, M., Hägg, D., Brantsing, C., Rotter, N., Apelgren, P., ... & Gatenholm, P. (2017).Plastic and Reconstructive Surgery Global Open
3D bioprinting of human chondrocyte-laden nanocellulose hydrogels for patient-specific auricular cartilage regeneration.Ávila, H. M., Schwarz, S., Rotter, N., & Gatenholm, P. (2016).Bioprinting
3D printing of nano-cellulosic biomaterials for medical applications. Sultan, S., Siqueira, G., Zimmermann, T., & Mathew, A. P. (2017). Current Opinion in Biomedical Engineering
Increased lipid accumulation and adipogenic gene expression of adipocytes in 3D bioprinted nanocellulose scaffolds.Henriksson, I., Gatenholm, P., & Hägg, D. A. (2017).Biofabrication
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting.Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., ... & Doyle, B. J. (2018). Journal of the mechanical behavior of biomedical materials
https://doi.org/10.1038/s41598-017-06028-y
https://doi.org/10.1515/bnm-2016-0004
https://doi.org/10.1097/GOX.0000000000001227
https://doi.org/10.1016/j.bprint.2016.08.003
https://doi.org/10.1016/j.cobme.2017.06.002
https://doi.org/10.1088/1758-5090/aa5c1c
https://doi.org/10.1016/j.jmbbm.2017.09.031
Publications
4
Bioprinted (3D) co-cultured spheroids with NSCLC PDX cells and cancer associated fibroblasts (CAFs) using alginate/gelatin hydrogel.Mondal, A., Gebeyehu, A., Subramanian, R., Rishi, A., & Singh, M. (2018). AACR, Cancer research
3D Bioprinting–Flow Cytometry as Analytical Strategy for 3D Cell Structures.Gretzinger, S., Beckert, N., Gleadall, A., Lee-Thedieck, C., & Hubbuch, J. (2018).Bioprinting
3D printing of PDMS improves its mechanical and cell adhesion properties Skin Grafting on 3D Bioprinted Cartilage Constructs In Vivo. Ozbolat, V., Dey, M., Ayan, B., Povilianskas, A., Demirel, M. C., & Ozbolat, I. T. (2018).ACS Biomaterials Science & Engineering
Fabrication of naftopidil-loaded tablets using a semi-solid extrusion-type 3D printer, and the characteristics of the printed hydrogel and resulting tablets. Apelgren, P., Amoroso, M., Säljö, K., Lindahl, A., Brantsing, C., Orrhult, L. S., ... & Kölby, L. (2018).Journal of pharmaceutical sciences
3D Printing in Medicine
Skin Grafting on 3D Bioprinted Cartilage Constructs In Vivo. Apelgren, P., Amoroso, M., Säljö, K., Lindahl, A., Brantsing, C., Orrhult, L. S., ... & Kölby, L. (2018).Plastic and Reconstructive Surgery Global Open
https://doi.org/10.1158/1538-7445.AM2018-5018
https://doi.org/10.1016/j.BPRINT.2018.e00023
https://doi.org/10.1021/acsbiomaterials.7b00646
https://doi.org/10.1016/j.xphs.2018.08.026
3D bioprinting human chondrocytes with nanocellulose–alginate bioink for cartilage tissue engineering applications.Tagami, T., Ando, M., Nagata, N., Goto, E., Yoshimura, N., Takeuchi, T., ... & Ozeki, T. (2018).Biomacromolecules https://doi.org/10.1021/acs.biomac.5b00188
3D bioprinting for musculoskeletal applications. Popov, A., Malferrari, S., & Kalaskar, D. M. (2017).
https://doi.org/10.2217/3dp-2017-0004
https://doi.org/10.1097/GOX.0000000000001930
Publications
5
Bioink properties before, during and after 3D bioprintingHölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016).Biofabrication
The 3D Printing of Calcium Phosphate with K-Carrageenan under Conditions Permitting the Incorporation of Biological Components—A Method.Kelder, C., Bakker, A., Klein-Nulend, J., & Wismeijer, D. (2018). Journal of Functional Biomaterials
3D Bioprinting and Stem Cells.Moore, C. A., Shah, N. N., Smith, C. P., & Rameshwar, P. (2018).Somatic Stem cells
Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus.Berg, J., Hiller, T., Kissner, M. S., Qazi, T. H., Duda, G. N., Hocke, A. C., ... & Kurreck, J. (2018).Scientific reports
3D bioprinting of a corneal stroma equivalent.Isaacson, A., Swioklo, S., & Connon, C. J. (2018).Experimental eye research
Computational Fluid Dynamics and Quantitative Cell Viability Measurements in Dispensing-Based Biofabrication.Bahrd, A. (2017).Digitale Vetenkapliga Arkivet (DIVA)
Development of nanocellulose-based bioinks for 3d bioprinting of soft tissue.Gatenholm, P., Martinez, H., Karabulut, E., Amoroso, M., Kölby, L., Markstedt, K., ... & Henriksson, I. (2018).3D Printing and Biofabrication
https://doi.org/10.1088/1758-5090/8/3/032002
https://doi.org/10.3390/jfb9040057
https://doi.org/10.1007/978-1-4939-8697-2_7
https://doi.org/10.1038/s41598-018-31880-x
https://doi.org/10.1016/j.exer.2018.05.010
https://doi.org/10.1007/978-3-319-45444-3_14
Publications
6
Multi-channel silk sponge mimicking bone marrow vascular niche for platelet production.Tozzi, L., Laurent, P. A., Di Buduo, C. A., Mu, X., Massaro, A., Bretherton, R., ... & Balduini, A. (2018).Biomaterials
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting. Di Giuseppe, M., Law, N., Webb, B., Macrae, R. A., Liew, L. J., Sercombe, T. B., ... & Doyle, B. J. (2018).Journal of the mechanical behavior of biomedical materials
Simple additive manufacturing of an osteoconductive ceramic using suspension melt extrusion.Slots, C., Jensen, M. B., Ditzel, N., Hedegaard, M. A., Borg, S. W., Albrektsen, O., ... & Andersen, M. Ø. (2017).
Acta Biomaterialia
Soft-Microrobotics: The Manipulation of Alginate Artificial Cells. Sheckman, S. (2019).
https://doi.org/10.1016/j.biomaterials.2018.06.018
https://doi.org/10.1016/j.jmbbm.2017.12.018
https://doi.org/10.1101/509265
Microextrusion Printing Cell-Laden Networks of Type I Collagen with Patterned Anisotropy and Geomtery.Nerger, B., Brun, P. & Nelson, C. (2019).
Acta Biomaterialia https://doi.org/10.1016/j.actbio.2019.01.018
Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering.Negrini, N. C., Bonnetier, M., Giatsidis, G., Orgill, D., Fare, S. & Marelli, B. (2019).
Mouse in vitro spermatogenesis on alginate-based 3D bioprinted scaffoldsBaert, Y., Dvorakova-Hortova, K., Margaryan, H., Goossens, E. (2019).Biofabrication
https://doi.org/10.1088/1758-5090/ab1452
Publications
www.cellink.com 6
Extrusion-based printing of sacrificial Carbopol ink for fabrication of microfluidic devicesOzbolat, V., Dey, M., Ayan, B., Ozbolat, I. T. (2019).Biofabrication
Process- and bio-inspired hydrogels for 3D bioprinting of soft free-standing neural and glial tissues Haring, A., Thompson, E., Tong, Y., Laheri, S., Cesewski, E., Sontheimer, H., Johnson, B. (2019).Biofabrication
https://doi.org/10.1088/1758-5090/ab10ae
https://doi.org/10.1088/1758-5090/ab02c9
https://doi.org/10.1016/j.procir.2017.04.020
Contact [email protected]
or visit www.cellink.com
to request a quote today!
Formulation and Characterization of a SIS-Based Photocrosslinkable BioinkSerna, J., Sergio, L. F., Talero, V. A., Briceño, J. C., Muñoz-Camargo, C., Cruz, J. C. (2019).Polymers
A study on degradation behavior of 3D printed gellan gum scaffolds Yu, I., Kaonis, S., Chen, R. (2017).Procedia CIRP
https://doi.org/10.3390/polym11030569
