CELESTE 24V LEXILE LINEAR LIGHTING · CELESTE™ 24V FLEXIBLE LINEAR LIGHTING BUILDER CHANNEL COVERS - SLIM / SQUARE / 45° / DUO DESCRIPTION Protects LED tape light and slightly

SPEC SHEET | CELESTE™ 300 - 24V LED STRIP LIGHT | Last Modified: 030920-7.0 | 1 OF 9

Lucetta Lighting is a division of Elemental LED Inc.885 Trademark Drive, Suite 200 | Reno, NV 89521 | (833) 533-7732| [email protected]

© 2020 Elemental LED Inc. All rights reserved. Specifications are subject to change without notice.

SPECIFICATION SHEET

CELESTE™ 24V FLEXIBLE LINEAR LIGHTING

Project

Type

VIP-24CEL300 2000K 2400K 2700K 3000K 3500K 4200K 5000K 6300KLumens1 314 Lm/ft. 295 Lm/ft. 318 Lm/ft. 337 Lm/ft. 346 Lm/ft. 364 Lm/ft. 373 Lm/ft. 374 Lm/ft.

Luminous Efficacy2 96 Lm/W. 89 Lm/W. 96 Lm/W. 102 Lm/W. 105 Lm/W. 110 Lm/W. 113 Lm/W. 113 Lm/W.

CRI 96 97 97.9 97.7 98.1 97.5 97.9 97.5

R9 86.5 96.3 97.1 96.4 98.2 97.1 98.3 95.9

RF Skin 99 99 98 98 98 97 94 99

Gamut 101 103 103 102 102 102 101 102

Fidelity 94 95 95 95 96 95 94 95

SDCM Steps3 Single Step MacAdam Ellipse

Voltage 24VDC

Wattage 3.3W/ft.

Max Run4 47 feet

Cut Points 1.32 in.

LED Chips 72/ft.

Dimmable Yes

Field Cuttable Yes

Dimensions 0.47 x 0.1 in. (W x H)

Environment Indoor / Damp Location / IP20

Certification UL Listed 2108, RoHS, Title 24 - JA85

Warranty 12 Years

Gold Plated PCB Yes

SPECIFICATIONS

VIP - - - - - -Model CCTLumens Channel

24 CEL 300Voltage ColorLength Mount Driver

SKU Builder

LENGTH

100SP

Length (in.)

CHANNEL

SL* DME

SQ* SCNC

45* SQ20

DUO RC20

REC CA

COLOR*

AL

WH

BL

MOUNT

3M VC

MC HNG

UC RC

Driver

JUSTIN (JUS ELEC)

JUSTIN (JUS MAG)

LUTRON (LUT)

ELECTRONIC (ELEC)

0-10V (010)

ERP/VLM (VLM)

CCT

20 35

24 42

27 50

30 63

FULLY BUILT FIXTURES

Notes:

300��/��

*Black and White Channel Color options only available for (SL) Slim, (SQ) Square, & (45) 45 Degree.

**Driver and Mounting selections are for specifying purposes only. Driver and mounting options must be purchased separately.


SPECIFICATION SHEET


SLIM (SL)

0.67 in.

0.30 in. 0.38 in.

0.82 in.

SQUARE (SQ)

0.67 in.

0.94 in.

0.67 in.

0.32 in.

45º (45)

0.82 in.

0.67 in.

0.55 in.0.27 in.

CHANNELS

DUO

1.70 in.

0.74 in.0.27 in.

0.67 in.

CANAL (CA)

0.69 in.

0.61 in.

0.54

in.

0.59

in.


SPECIFICATION SHEET


FINISH LENGTH PRODUCT INCLUDES

ALWHBL

48 in.96 in.

Mounting Clips sold separately.

CHANNELS (cont.)

RECESSED

0.596 in.

0.49 in.

1.03 in.

0.74 in.

0.42 in.

DOME0.768 in.

0.530 in.

0.629 in.

0.236 in.

20mm ROUNDED CORNER

20mm SQUARE CORNER

0.81 in.

1.81 in.

1.81 in.

1.81 in.

1.81 in.0.787 in.

SCONCE 0.840 in.

0.536 in.

1.10 in.

1.21 in.


SPECIFICATION SHEET


LED DRIVERS (Required)The following Listed LED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications.

L

W

H

L

W

H

SKU INPUT VOLTAGE WATTAGE L - LENGTH W - WIDTH H - HEIGHT

481-24DCR 120VAC 48W

11.25 in. 3.37 in. 3.25 in.

482-24DCR-240 240VAC 48W483-24DCR-277 277VAC 48W961-24DCR 120VAC 96W962-24DCR-240 240VAC 96W963-24DCR-277 277VAC 96W

SKU INPUT VOLTAGE WATTAGE L - LENGTH W - WIDTH H - HEIGHT

481-24SSD 120VAC 48W

11.62 in. 1.37 in. 1.31 in.482-24SSD 240/277VAC 48W961-24SSD 120VAC 96W962-24SSD 240/277VAC 96W

JUSTIN Inc. MAGNETIC DRIVERS

JUSTIN Inc. ELECTRONIC DRIVERS

Optimal dim to dark 24V Dimmable MLV Drivers.

Optimal dim to dark 24V Dimmable ELV Drivers.

COMPATIBLE PRODUCTS

If a different Driver from one of our partners is required, please contact us at www.LucettaLighting.com.


SPECIFICATION SHEET


The following Listed LED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications.

LW

HSKU Input Voltage Wattage L - LENGTH W - WIDTH H - HEIGHT

DI-DM-24V40W-L3D 120VAC40W 4.89 in. 4.00 in. 2.62 in.

DI-DM-24V40W-LTE 120-277VAC

SKU Input Voltage Wattage L - LENGTH W - WIDTH H - HEIGHT

DI-DM-24V96W-L3D 277VAC 96W 5.50 in. 2.20 in. 10.50 in.

Hi-lume 1% LED DIMMABLE DRIVER

Hi-lume Premier 0.1% LED DIMMABLE DRIVER

LW

H

Hi-Lume Premier 0.1% LED Driver has a minimum load of 5W and dims from 100-0.1%.

Hi-lume 1% LED Driver has a minimum load of 5W and dims from 100-1%.

LED DRIVERS Cont. (Required)

COMPATIBLE PRODUCTS

W

H

SKU Input Voltage Voltage Wattage L - LENGTH W - WIDTH H - HEIGHT

CVD30L24DC 120 - 277VAC 24V 30W11.4" 2.36" 1.4"CVD60L24DC 120 - 277VAC 24V 60W

CVD96L24DC 120 - 277VAC 24V 96W

L

MAGNITUDE 24V 0-10V DriverDim-to-Dark Driver which dims down to 1% minimum dim level.*

*Maximize dimmer trim for optimum dimming.


SPECIFICATION SHEET


W

H


DI-TD-24V-10W ~110VAC 10W a 5.5 in. 1.8 in. 1.1 in.DI-TD-24V-20W ~110VAC 20W a 5.5 in. 1.8 in. 1.1 in.DI-TD-24V-30W ~110VAC 30W a 7 in. 2.3 in. 1.4 in.DI-TD-24V-45W ~110VAC 45W a 7 in. 2.3 in. 1.4 in.DI-TD-24V-60W ~110VAC 60W b 7.9 in. 2.7 in. 1.8 in.DI-TD-24V-80W ~110VAC 80W b 7.9 in. 2.7 in. 1.8 in.DI-TD-24V-120W ~110VAC 120W b 9.1 in. 2.7 in. 1.8 in.

L

L

N

V+

V- W

H

L

OMNIDRIVE® 24V ELECTRONIC DIMMABLE LED DRIVERCompatible with Forward Phase and Reverse Phase Dimmers. 5-10% minimum dim level.

a.

b.

The following Listed LED Drivers are recommended for compatibility and to meet NEC code when installed according to specifications. LED DRIVERS Cont. (Required)

COMPATIBLE PRODUCTS


VLM60W-24 120 / 277VAC 60W 5.1 in. .75 in. .77 in.VLM100W-24 120 / 277VAC 100W 5.38 in. 1 in. .77 in.

VLM SERIES CONSTANT VOLTAGE DRIVERUsed for On/Off or PWM dimming applications.

L

W

H


SPECIFICATION SHEET


BUILDER CHANNEL COVERS - SLIM / SQUARE / 45° / DUO DESCRIPTION

Protects LED tape light and slightly softens light. Note: there is an average warm shift in Kelvin of 35K and an average 28% decrease in delivered lumens.

Protects LED tape light with no visible color shift or change in delivered lumens.

** - SKUs listed above are for Single covers. Add a -10 for a 10 pack bundle.

BUILDER CHANNEL MOUNTING OPTIONS - SQUARE / 45° / DUO

FORM FACTOR DESCRIPTION

SLIM Mounting Tape (3M)

3M® high-bond double-sided adhesive tape designed to install channel on a flat, indoor surface.

SLIM Mounting U-Clips (UC) Secure SLIM Channel to flat surface with this pressure-fit clip.

FORM FACTOR DESCRIPTION

Mounting Clips (MC)

Secure to flat surface with this pressure-fit clip. Adds 0.12in. height to channel.

Vertical Mounting Brackets (VC)

Used to install in a vertical orientation and includes an Allen key and allen screws for securing to a vertical surface.

Hanging Hardware Kit (HNG)

Transform your Channel into a pendent fixture with Hanging Hardware Kit.

Rotating Mounting Clips (RC)

Secure to flat surface and adjust to desired angle with this pressure-fit clip. Adds 0.74in. height to channel.

x2

BUILDER CHANNEL MOUNTING OPTIONS - SLIM

ACCESSORIES


SPECIFICATION SHEET


COMPLIANCE & REGULATORY APPROVALS

MECHANICAL DIAGRAM

• Input: 24VDC Constant Voltage• LED Chip Type: 2835 GuangMu• LED Chip Beam Angle: 120°• Mounting (sold separately): 3M adhesive backing, slim

channel mounting clips, slim channel 3M adhesive.• Connections: 96" bare lead: 20/2 AWG• Ambient Temp6: -4 - 122°F (-20 ~ 50°C)• Operating Temp7: -4 - 176°F (-20 ~ 80°C)

1. Lumen value measured in accordance to IES LM-80-08. LED chips have a luminous flux range with a tolerance of +/- 5%.2. Actual efficacy value is dependent to specified LED driver (power supply). An estimated efficacy value can be calculated as follows: Lumen value

divided by average power consumption per foot.3. SDCM Steps rated according to ANSI LED binning standard.4. Each run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length. Max run may exceed

Class 2 limit. Actual wattage may differ from calculated wattage due to voltage drop across run.5. Can be used to comply with Title 24 Part 6 High Efficacy LED requirements JA8-2016-E.6. Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage LED

chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency. 7. Operating temperature is measured according to the minimum and maximum ambient temperature environment.

• UL Listed 2108 Flexible Lighting Systems. Certified for United States and Canada. File # E506975.

• Approved for storage areas of clothes closets per NEC 410.16.A.1 and 410.16.C.5

Safety

• LED chip data measured in accordance to IES LM-80-08.• Photometric & Colorimetry data measured in accordance

to IES LM-79-08, in Elemental LED's Innovation Lab.

Performance

COMPATIBLE DRIVERSAdditional information on compatible Drivers can be found on the Lucetta web site at: Lucettalighting.com.

SPECIFICATIONS ADDITIONAL ACCESSORIESAccessories listed are fully compatible with our CELESTE™ product line. Further information on these products and more accessories can be found in our latest catalog or online at Lucettalighting.com.

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

+ 24V

-

+

-

Cut Point: 1.32 in.

Ø .19 in. (5mm)

Leads:R

ed (+)B

lack (-)

3 ft. (914mm) 20/2 AWG UL 2464 Wire

+ - Ø .45 in.

(11.4mm

)

3 ft. (914mm) 20/2 AWG UL 2464 Wire

.47"

.1"


Lucetta Lighting is a division of Elemental LED Inc.885 Trademark Drive, Suite 200 | Reno, NV 89521 | (833) 533-7732| [email protected]

© 2020 Elemental LED Inc. All rights reserved. Specifications are subject to change without notice.

SPECIFICATION SHEET


1. Install in accordance with national and local electrical code regulations.

2. This product is intended to be installed and serviced by a qualified, licensed electrician.

3. Only install with a listed Class 2 DC Constant Voltage LED Driver. 4. Not for use in or on walls of pools, fountains, or other partially or fully

submersed locations.5. Do not modify or disassemble product beyond instructions or this

warranty will be void.6. Actual color may vary from what is pictured above and on other print

materials due to the limitations of photographic processes.7. We reserve the right to modify and improve the design of our fixtures

without prior notice. We cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output.

SAFETY / WARNINGS / DISCLOSURES

Limited WarrantyThis product has a twelve (12) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at Lucettalighting.com within the Policies section. For warranty related questions please contact product support.

Consumer’s AcknowledgmentElemental LED, Inc. stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the correct components is essential. Elemental LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Elemental LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from an Elemental LED employee or agent regarding a customer’s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer’s responsibility to adhere strictly to all information contained in the Product Specification Sheets.

There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Elemental LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Elemental LED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Elemental LED product specifications can make the requisite decisions appropriate for a successful finished lighting application.

WARRANTY• CELESTE™ LED STRIP LIGHT Installation Guide

ADDITIONAL INFORMATION

Documents

CELESTE 24V LEXILE LINEAR LIGHTING · CELESTE™ 24V FLEXIBLE LINEAR LIGHTING BUILDER CHANNEL COVERS - SLIM / SQUARE / 45° / DUO DESCRIPTION Protects LED tape light and slightly