Embed Size (px)
Citation preview
USG COMPOSITIONS® DECORATIVE CLOUDS
FEATURES AND BENEFITS
• Decorative clouds offered in several attractive shapes and confi gurations. • Precut components expertly packaged and shipped in one
convenient box. • Custom look without the diffi cult coor dination of custom applications.• Premier USG Compässo™ Elite extruded perimeter trim. • Fit-and-fi nish trim aesthetics appear seamless with minimal trim
intersections and no corner trim intersections. • Installation requires minimal hanger wires, eliminating the need for wires
at perimeters.• Simplifi es specifying and ordering. Note: Panels are selected and shipped separately.
APPLICATIONS
• All interior general-use areas
USG Compositions® Decorative Clouds/USG Mars™ Acoustical
Panels/USG Donn® Brand DX®/DXL™ Acoustical Suspension System
TO ORDER SAMPLES, GO TO USG.COM OR CGCINC.COM
STANDARD COLORS
Flat White050
SUSPENSION SYSTEM TRIM PROFILES
15/16"
4"
3/4"
6"
3/4"
8"
3/4"
USG Ceiling Solutions
IS282/rev. 11-16© 2016 USG Corporation and/or its affiliates. All rights reserved.Printed in U.S.A.
Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661
NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.
ORDER SAMPLES/LITERATUREUSG: [email protected]
fax: 888 874-2348 | usg.com CGC: contact Sales Representative
TECHNICAL SERVICES800 USG.4YOU (874-4968)
FOR MOST UP-TO-DATE TECHNICAL INFORMATION
AND LEED REPORT TOOLusgdesignstudio.com cgcdesignstudio.com
Tees ASTM Class Length Height Item Number Color
15/16" TEE SYSTEMMain Tee
15/16"
Heavy Duty Custom per kit 1-1/2" DX/DXL26 Flat White
Cross Tee
15/16"
— 4' 1-1/2" DX/DXL424 Flat White
— 2' 1-1/2" DX224 Flat White
PANEL OPTIONS Square Edge Shadowline Shadowline Tapered Shadowline Beveled
ACCENT LIGHTING OPTION
AL Clip AL Flexible Track AL Lighting
Supplied by GEGElighting.com
Note: Panels are selected and shipped separately.
LAYOUTS Squares Rounded Rectangles
Layout Trim Layout Trim
6'x6' 4", 6", 8" 6'x6' 4", 6", 8"
6'x8' 4", 6", 8" 6'x8' 4", 6", 8"
6'x10' 4", 6", 8" 6'x10' 4", 6", 8"
6'x12' 4", 6", 8" 6'x12' 4", 6", 8"
6'x14' 4", 6", 8" 6'x14' 4", 6", 8"
8'x8' 4", 6", 8" 8'x8' 4", 6", 8"
8'x10' 4", 6", 8" 8'x10' 4", 6", 8"
8'x12' 4", 6", 8" 8'x12' 4", 6", 8"
8'x14' 4", 6", 8" 8'x14' 4", 6", 8"
10'x10' 4", 6", 8" 10'x10' 4", 6", 8"
10'x12' 4", 6", 8" 10'x12' 4", 6", 8"
10'x14' 4", 6", 8" 10'x14' 4", 6", 8"
12'x12' 4", 6", 8" 12'x12' 4", 6", 8"
12'x14' 4", 6", 8" 12'x14' 4", 6", 8"
EDGE TRIM OPTIONS 4" 6" 8"
4"
3/4"
6"
3/4"
8"
3/4"
ACCESSORIES Tee Brace Splice Plate Attachment Clip 12-Gauge Hanger Wire
FOR MORE INFORMATION
Product literatureSystem guide: IS267 Installation guide: IS266 Data sheet: IS282
InstallationMust be installed in compliance with ASTM C636, ASTM E580, CISCA and standard industry practices, within all applicable code requirements. Alternative assemblies and installation methods may be utilized when approved by the authority having jurisdiction. USG recommends checking with the authority having jurisdiction prior to designing and installing a suspended ceiling system.
Online toolsusgdesignstudio.com or cgcdesignstudio.com
ICC Evaluation Service, LLC Report ComplianceFor areas under ICC jurisdiction, see ICC-ES Evaluation Report ESR-1222 for allowable values and conditions of use. Reports are subject to reexamination, revision and possible cancellation. Refer to usg.com for most current version.
LA Research Report - RR 25764Refer to usg.com for most current version.
NoticeWe shall not be liable for incidental and consequential damages, directly or indirectly sustained, nor for any loss caused by application of these goods not in accordance with current printed instructions or for other than the intended use. Our liability is expressly limited to replacement of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty (30) days from date it was or reasonably should have been discovered.
USG COMPOSITIONS® DECORATIVE CLOUDS
The trademarks USG, CGC, COMPÄSSO, COMPOSITIONS, DONN, DX, DXL, MARS, IT'S YOUR WORLD. BUILD IT., the USG/CGC logo, the design elements and colors, and related marks are trademarks of USG Corporation or its affiliates.
Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specification and installation.
