Upload
ceetak-ceetak
View
222
Download
2
Embed Size (px)
DESCRIPTION
Ceetak Engineering Ltd, Bedford UK. Total Pump Management.
Citation preview
Ceetak Engineering Ltd specialise in the total management and support of pumps and other rotating equipment installed on applications ranging from the chemical and pharmaceutical industries to food and waste management. From our network of strategic service centres our service personnel offer support 24 hours a day, 365 day a year.
Having established ourselves as a market leader in the ‘total management concept’, we are able to offer a comprehensive and diverse range of services, to meet the demands of the process industry.
Ceetak Engineering Ltd are unique in being able to trade with all manufacturers, providing technical and commercial advantage...
Introduction
24 hour Emergency Hot-line07659 161 861
New PumP SaleS aNd SPareS
ComPlete overhaul & rePair
laSer aligNmeNt
CoNditioN moNitoriNg
Site maiNteNaNCe & ShutdowNS
SiNgle SourCe SuPPly
iNveNtory ratioNaliSatioN
Fault diagNoStiCS
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
warringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
teessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
grangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems ltdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
tel. 0844 561 0551 Fax. 0844 561 0552
Locations
24 hour Emergency Hot-line07659 161 861
Bedford
Warrington
Teesside
Grangemouth
Bedford
Warrington
Teesside
Grangemouth
Gloucester
Gloucester
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
Our workshops are equipped to carry out at short notice, major and minor overhauls and repairs for all types of rotating equipment. All work undertaken is guaranteed and a detailed inspection report is provided.
Services 1
To assist with short periods of process downtime, we offer planned maintenance contracts and scheduled repair work for factory shutdowns. All our engineers are available and trained to work on a wide variety of process installations.
With extensive experience of equipment manufacturers and the requirements of process systems, we are able to evaluate the best technical and commercial alternatives for your plant.
As the process industry operates around the clock, 365 days a year so does our pump support service. Whenever you need engineering support call the Emergency Hot-line. Your message will be directly transferred to a duty engineer who will respond immediately, any time, day or night.
Ceetak’s ‘Total Support’ function includes, commissioning engineers, performance testing, fault diagnosis, condition monitoring and more.
COMPLETE OVERHAUL & REPAIR
SITE MAINTENANCE & SHUTDOWNS
NEW EQUIPMENT
24 HOURS A DAY 365 DAYS A YEAR
TOTAL SUPPORT FUNCTION
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
Ceetak Engineering Ltd are unique in being able to trade with all manufacturers, providing technical and commercial advantage.
Services 2
All too often stock holdings can rise above acceptable levels. We will assist in the evaluation of inventory to reflect installed units and how critical to process.
When expanding the level of support we offer, Ceetak are able to provide personnel on site to manage or implement site maintenance. With our SmartPart software we can also provide technical data, operating costs and failure mode analysis, to support our contract.
To ensure continuity of supply, we can offer civil mechanical and electrical project work for a wide variety of installations.
Our network of strategically placed service centres are all fully equipped to carry out our full range of services, ensuring continuity of service no matter where our clients are based.
SINGLE SOURCE SUPPLY
INVENTORY RATIONALISATION
TOTAL MANAGEMENT CONCEPT
LOCATION NETWORK
TURNKEY PROJECTS
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
SmartPart 1
FAILURE MODE ANALYSIS
REDUCED DOWNTIME
REDUCED NON-CONFORMANCES
EXTENSIVE PUMP DATABASE
SINGLE SOURCE FOR ALL SPARES
SECTIONAL DRAWINGS
PERFORMANCE CURVES
ON-LINE ORDERING
PERFORMANCE HISTORY
FINANCIAL PERFORMANCE
EXTENSIVE REPORTING
It is a well-known fact that whilst the efficiency of rotating equipment has vastly improved over the years, the ordering of spares and management of equipment has not. Ceetak Engineering Ltd recognises this and have developed their unique SmartPart system.
SmartPart is utilises the internet to give you total access to your pump data, maintenance logs and parts lists. Fast and simple ordering direct to Ceetak Engineering Ltd enables quick response and considerable cost savings.
SmartPart can be made available to cover the management of a vast array of plant and assets not just rotating equipment. Please contact Ceetak Engineering Ltd for further information on how SmartPart can be configured to your particular application.
SMARTPART - Total Pump Asset Management
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
SmartPart 2 Full details of the asset are stored including asset
number, model details, serial number, operational conditions, speeds, design, fluids, pressures and location.
Virtually any document such as sectional drawings, performance curves and manuals can be stored in PDF format against each asset, model or group of assets.
The assets parts list can be easily view and printed. Simple on-line ordering allows purchasing of OEM parts direct from Ceetak Engineering Ltd
Historical data can be stored in the assets on-line log book, logging all repairs, parts used and labour duration and costs. Ability to use the historical data for Failure Mode Analysis, Costing and Parts usage.
Extensive live reports can be generated on the stored historical data, and display in table or graphical formats. Ideal for failure mode analysis, repair costing between dates, identify bad performers and general model and manufacturer data.
Ability to store photographic data against each asset or model to help with identification and location.
FULL ASSET DETAILS
TECHNICAL LIBRARY
EXTENSIVE PARTS DETAILS
HISTORICAL DATA
LIVE ON-LINE REPORTING
PHOTOGRAPHS
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
Inventory Holding too much inventory, not the correct parts, low turns
ratio, want to use capital better?
REDUCED ORDER PROCESS COSTS
CRiTiCal analySiS
GaP analySiS
lEaD TimE ExPOSURE
REDUCED aDminiSTRaTiOn
linE iTEm REDUCTiOn
REmOVal OF OBSOlESCEnCE
STOCK ValUE REDUCTiOn
Ceetak Engineering Ltd through its wealth of experience, are able to evaluate your inventory and work to reflect an efficient stock requirement to support your process.
Q.
a.
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems ltdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
Single Source In a market that is continually evaluating its supply route, Ceetak
Engineering Ltd have pioneered the efficient procurement of process equipment to its customers.
[email protected] www.ceetakengineering.com
abcdefBedford (Head Office)1 Napier Road,Bedford, MK41 0QR
WarringtonUnit 10 Easter Court,Europa Boulevard,Warrington, WA5 7ZB
TeessideUnit 6, Stephenson Court,Skippers Lane Ind. Est.Middlesbrough, TS6 6UT
GrangemouthCentral Eng. Workshop,North Site, Earls Road,Grangemouth, FK3 8XG
Pump Support Systems LtdUnit 5,Centurion Ind. Est,Empire WayGloucester, GL2 5HY
Tel. 0844 561 0551 Fax. 0844 561 0552
Leasepum
p
abcdefleasepump.com
Ceetak Engineering Ltd, 1 Napier Road, Bedford, MK41 0QRTel. 0844 561 0551 Fax. 0844 561 0552 [email protected]
www.leasepump.com
NO PURCHASE COSTNo capital outlay allowing you to free up capital to use elsewhere.
NO STOCK
FIXED OPERATING COSTS
SCHEDULED MAINTENANCE
TRUE LIFE CYCLE COSTING
ANY PUMP TYPE
No working capital, no spares to commission, stock available 24 hours a day.
Budgeted operating costs allowing greater control of expenditure. Fixed preventive maintenance scheduling.
Scheduled maintenance included and a dedicated after market support company available to support your asset 24 hours a day 365 days a year using highly qualified engineers.
We take key eliminators that make up the LLC and monitor these costs which are more specific to the assets relationship to process and the business.
Centrifugal - Mechanically Sealed or Magnet Drive, Positive Displacement - Vacuum
Making life easy...
TOTAL SUPPORT24 hours a day, 365 days a year
Leasepum
p
abcdefleasepump.com
Ceetak Engineering Ltd, 1 Napier Road, Bedford, MK41 0QRTel. 0844 561 0551 Fax. 0844 561 0552 [email protected]
www.leasepump.com
By leasing your pump from leasepump.com you are able to purchase your pump without the problem of raising capital, which may be utilised elsewhere.
By leasing your pump from leasepump.com stock will be provided for the maintenance of the unit during the term of its lease. This eliminates commissioning spares or original manufacturers recommended spares. You will be able to feel safe in knowing the stock is available 24 hours a day via our emergency call out service.
By leasing your pump from leasepump.com over an agreed period the operating costs for production assets may be budgeted for over extended periods allowing greater control of expenditure.
By leasing you pump from leasepump.com you have the security of a dedicated after market support company 24 hours a day, 365 days a year.
For further information regarding leasing pumps, please contact using the details below.
NO CAPITAL OUTLAYNO WORKING CAPITAL
FIXED OPERATING COSTSAFTERMARKET SUPPORT
TRUE LIFE CYCLE COSTING
Introduction
PUMPSYSTEMS
LTD
PUMP SUPPORT SYSTEMS LTD a subsidiary of Ceetak Engineering Ltd.
Our aim is to provide independent, high quality and competitive Pump and Valve services to a wide range of commercial industries.
As well as having a fully equipped workshop for all repair work we can also undertake site work utilising our own directly employed mobile service engineers who have many years of experience working with pumps and associated equipment in a variety of locations and businesses.
If you are looking for a reliable and fully skilled company to supply or maintain your Pump and Valve systems, please browse our web site to find out more about our comprehensive services, or contact us discuss your requirements in more detail.
PUMP SALES AND SERVICE
PUMP INSTALLATION
PLANNED MAINTENANCE
COMPLETE PUMPING SOLUTIONS
PUMP CONTROL SYSTEMS
PUMP SUPPORT SYSTEMS LTDUnit5 Centurion Ind. Est. Empire Way, Gloucester, GL2 5HY
APPROVED CONTRACTOR
National Inspection Council forElectrical Installation Contracting
Tel. 01452 522 144 Fax. 01452 783 [email protected] www.pumpsupport.co.uk
A subsidiary of Ceetak Engineering Ltd
Products & Services
PUMPSYSTEMS
LTD
PUMP SUPPORT SYSTEMS LTDUnit5 Centurion Ind. Est. Empire Way, Gloucester, GL2 5HY
APPROVED CONTRACTOR
National Inspection Council forElectrical Installation Contracting
Tel. 01452 522 144 Fax. 01452 783 [email protected] www.pumpsupport.co.uk
A subsidiary of Ceetak Engineering Ltd
As specialists in Pump and Valve repairs, machining, modifications, installation and supply we aim to provide a one stop service for all your pump and fluid control problems.
Pump Support Systems through choice are not allied to any one manufacturer for the supply and service of pumps and valves since to be so would commercially restrict the service we offer to our clients., therefor we regularly undertake work of a variety of makes, including: FLYGT, GRUNDFOS, LOWARA, CHESTERTON, WILO-SALMSON, PULLEN, STORK, WORTHINGTON SIMPSON, DRESSER, MONO,
SPP, ABB and others.
Repair work - can be undertaken both on-site utilising our mobile service engineers who have many years experience working on pumps and valves in a variety of locations, or by skilled technicians at our workshop, where pumps and valves can be repaired, modified, machined, overhauled, tested and calibrated.
Planned Maintenance Contracts - for regular servicing and inspection can be provided, tailored to meet the specific needs of your company.
Pump Control Systems - we have extensive experience in providing pump control systems for a wide variety of applications, from the simplest float control panels to systems handling multiple, large horsepower, heavy flow pumping systems. We have the expertise to fit your application.
Site Installation Services - we provide comprehensive site installation and engineering services for all types of site equipment, whether it be a pump mounted to a tank or a fully automated PLC controlled pumping system.
call01452 522 144