C:Documents and SettingsCompaq … - ao.pdf · 2-way; 1000 PSI WOG; Reduced bore 200 2-way; 1000 PSI WOG; Full bore 201 2-way; ... ball and BSP female thread connection, pressure

Ball valvesIndex

Valves AO-001 page 190

2008

0301

A Index and product compare

General informationpage

Introduction 191

Product informationGas valves with approval, 2 way page

BSP female thread 192DIN flanges 192

Thread, 2 and 3-way pageA Brass 193

Mini ball valves 194PN 25, BSP thread 195PN 40, BSP thread 196PN 40, NPT thread 1973-way 198

A Stainless steel 1992-way; 1000 PSI WOG; Reduced bore 2002-way; 1000 PSI WOG; Full bore 2012-way; 1000 PSI WOG; Full bore; ISO 5211 'Direct Mount' 2023-way; 1000 PSI WOG; Reduced bore; ISO 5211 'Direct Mount' 203

3-piece, 2-way pageA Steel and stainless steel 204

Stainless steel; 1000 PSI WOG; Full bore 205Stainless steel; 1000 PSI WOG; Full bore; ISO 5211 'DirectMount'

206

Steel or stainless steel; ASME 600#; Full or reduced bore; ISO5211 'Direct Mount'

207

High pressure, 2-way pageSteel and stainless steel

High pressure ball valves 209

DIN wafer type, 2-way pageSteel and stainless steel

ECON®; PN 16 - PN 40; Full bore; ISO 5211 'Direct Mount' 210

DIN flanges, 2-way pageA Steel and stainless steel 211

ECON®; PN 16 - PN 40; Full bore; ISO 5211 'Direct Mount' 212BAC; PN 16 - PN 40; Full bore; ISO 5211 / CAPI 213

Cast Iron, ductile cast iron and bronzeFull bore 214

DIN flanges, 3- and 4-way pageA Stainless steel 215

PN 16; 3-way; 120° L-bore 216ECON®; PN 16 - PN 40; 3- & 4-way; L- , T- and X-bore; ISO 5211'Direct Mount'

217

BAC; PN 16 - PN 40; 3- & 4-way; L-, T- & X-bore; ISO 5211 /CAPI

218

ASME flanges, 2-way pageA Steel and stainless steel 219

ECON®; ASME 150#; Full bore; ISO 5211 'Direct Mount' 220ECON®; ASME 300#; Full bore; ISO 5211 'Direct Mount' 221ASME 150 - 300#; Reduced bore; ISO 5211 / CAPI 222BAC; ASME 150 - 300#; Full bore; ISO 5211 / CAPI 223

Accessories pageExtended bonnets for; Econ® Premium; 3-pce ball valves 224Extended bonnets for; Econ® Direct Mount; ball valves 225

Ball valvesIntroduction

Valves AO-002 page 191

2008

0301

SS mounting bracket

The last decade has seen a steady increase in the use of ball valves. The excellent price/quality ratio, simple and high-quality construction, broad applicability and ease of maintenance have certainly contributed to this. Econosto's assortment includes a wide range of ball valves for diverse applications.

Ball valves are characterised by a high flow capacity, due to the fact that the ball in open position does not constrain the medium flow. Moreover, ball valves all feature quarter-turn control, making this type of valve simple to mechanise. The standard fittings can be adapted or augmented with controls and/or accessories to match your specification, in our well-equipped workshop. Ball valves are available for a wide range of applications, from brass valves with threaded connection for use with water, for example, to stainless steel valves with flanged connection for use with corrosive media. The simple design with a limited number of parts makes ball valves easy to use and virtually maintenance-free

StemThe stem ensures the transmission between the actuator and the ball.

Process connectionThe illustrated ball valve is produced with two flanges, supplied as per DIN or ANSI standard, as required for coupling to the pipe system. Besides flanged ball valves, Econosto also supplies ball valves for threaded or butt weld connection.

Stem sealIn combination with the body and stem, the stem seal ensures that the flowing medium is perfectly sealed off from the atmosphere.

Flange drillingThe flange can be drilled in compliance with either DIN or ANSI standard.

BallIn combination with the sealing rings and the body, the ball serves as the closing device. Because in the open position the ball does not form an obstacle inside the valve, ball valves are characterised by a large Kv value.

Ball sealsIn combination with the ball, ball seals ensure a perfect sealing for the medium to be shut off.The ball seals are manufactured standardfrom PTFE.

This section gives an overview of the most commonly used ball valves in our range. Please do not hesitate to contact us for specifications not covered in this section.

ActuatorBall valves are supplied standard with a lever. In the photo, a pneumatic actuator is shown, this serves as actuating mechanism, with which the ball valve is put into the desired position by remote control.In addition to pneumatic actuators, Econosto also supplies electric and hydraulic actuators.

BodyIllustrated here as two-piece version. The Econosto ball valve range also includes one-piece and three-piece versions.The body is available in various material qualities for diverse applications.

Ball valvesGas valves with approval, 2 way

Valves AO-01-001 page 192

2008

0301

BSP female thread• fig. 1619

• B" – 2"• Pressure rating PN 16• Temperature range -20°/+70

°C• Full bore• EN 331 gas approval

Figure 1619Econ® figure 1619 brass ball valve with gas approval as per EN 331, full bore, floatingball and BSP female thread connection, pressure rating PN 25. Actuated by means of asteel lever with yellow PVC sleeve. This type of ball valve is used in (natural) gassystems.

Pressure and temperature rangeSize Pressure rating Temp. range -20 °C +70 °C

B" - 2" PN 16 -20°/+70 °C 16 16 [bar] Rem.: leak tested at 4 bar as per EN 331

Options• Butterfly handle• Butterfly handle with key locking device• Extension stem

Material specificationComponent Material EN and/or (DIN) W.nr.

Body, ball and stem 1) Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal (Secondary) NBRStem seal (Primary) FPM (Viton)Lever 2) Steel1) Body nickel plated, ball chromium plated2) Galvanised and covered with PVC sleeve, colour yellow RAL 1018

Ordering informationOrderingcode

Connection Pressure Size[inch]

class1619 BSP female threaded ends (for DIN flange model in ductile cast iron see fig. 1937) PN 16 B - 2

DimensionsDN d B L H M Weight["] [mm] [kg]B 10 13 45 45 80 0.13˘ 10 13 45 45 80 0.15A 15 17 59 52 105 0.25C 20 18 69 62 120 0.40

1 25 22 83 66 120 0.601B 32 24 94 78 135 0.951A 40 24 102 89 160 1.242 50 28 124 97 160 1.88

DN

L

M

B

H

d

DIN flanges• fig. 1937

• DN 20 - 200• Pressure rating PN 16• Ductile cast iron• DVGW approval

Figure 1937Econ® brass gas ball valves with female thread are available in the sizes ¼” through2”. Besides brass gas ball valves, Econosto also supplies flanged ball valves as perfigure 1937 with a DVGW approval for gas.

TypeThe body is manufactured from ductile cast iron and fitted with 2 flanges as per DIN2501 PN 16. This gas ball valve is special intended for those applications where figure1619 is not adequate, and is available in the sizes DN 20 through DN 200.

More informationFor more information please refer to the product page for figure 1937 elsewhere inthis section.

Ball valvesThread, 2 and 3-wayBrass


2008

0301

Ind

ex a

nd p

rod

uct

com

par

epage 194 page 195 page 196

Mini ball valves PN 25, BSP thread PN 40, BSP thread• PN 10• Temperature range -10°/+90

°C• Reduced bore• B" - C"• Female thread• Female/male thread

• PN 25• Temperature range

-10°/+110 °C• Full bore• B" - 2"• Female thread


-20°/+150 °C• Full bore• B"– 4"• Female x female thread• Male x male thread• Female x male thread

page 197 page 198

PN 40, NPT thread 3-way• Full bore• Temperature range

-20 °/+150 °C• B” – 4”• Female thread


-20°/+150 °C• Reduced bore• B” – 2”• Brass• BSP threaded connection



2008

0301

Mini ball valves• fig. 1610ER• fig. 1610FR

• PN 10• Temperature range -10°/+90

°C• Reduced bore• B" - C"• Female thread• Female/male thread

Econ® figure 1610 brass nickel-plated mini ball valve with reduced bore, floating ball,pressure rating PN 10. Figure 1610 is available in versions with BSP female thread orBSP female/male thread. Actuated by means of plastic lever handle. This type of ballvalve is very compact and generally applicable in e.g. compressed air, heating andwater systems up to maximum 10 bar.

Construction2 x female thread BSP ISO 228/1 Fig. 1610 ER1 x female and 1 x male thread Fig. 1610 FR

Pressure and temperature rangeSize Pressure rating Temperature range -10 °C +90 °C

B" - C" PN 10 -10°/+90 °C 10 10 [bar]


Body (nickel plated) Brass CuZn40Pb2 2.0402Ball (chromium plated) Brass CuZn40Pb2 2.0402Stem Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal NBRLever (black) PA (Nylon)

Options• With hose nipple

Ordering informationOrdering code Pressure Connection Inlet Connection discharge Size [inch]

class1610ER PN 10 BSP female threaded ends BSP female threaded ends B - C1610FR PN 10 BSP female threaded ends BSP male threaded ends B - C

DimensionsFigure DN d B C L H M Kv Cv Weight

["] [mm] [kg]1610ER B 8 10 41 26 30 3.3 3.8 0.091610ER ˘ 8 10 42 26 30 4.3 5.0 0.081610ER A 10 11 47 28 30 7.0 8.1 0.121610ER C 12 13 54 30 30 11.0 12.7 0.171610FR B 8 10 9 40 26 30 3.3 3.8 0.071610FR ˘ 8 10 9 40 26 30 4.3 5.0 0.061610FR A 10 11 11 45 28 30 7.0 8.1 0.101610FR C 12 13 15 45 30 30 11.0 12.7 0.16

H

DNd

BB

L

M

Fig. 1610ER

M

H

DNd

C B

L

Fig. 1610FR



2008

0301

PN 25, BSP thread• fig. 1602


-10°/+110 °C• Full bore• B" - 2"• Female thread

Econ® figure 1602 brass nickel-plated ball valve with full bore, floating ball and BSPfemale thread connection, pressure rating PN 25. Actuated by means of a steel leverwith PVC sleeve. This type of ball valve is generally applicable e.g. for compressed air,HVAC and water systems up to maximum 25 bar.

Construction2 x female thread BSP ISO 228/1

Pressure and temperature rangeSize Pressure rating Temperature range -10 °C +90 °C +110 °C

B" - 2" PN 25 -10°/+110 °C 25 25 22 [bar]


Body (nickel plated) Brass CuZn40Pb2 2.0402Ball (chromium plated) Brass CuZn40Pb2 2.0402Stem Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal NBRLever 1) Steel1) Galvanised and covered with PVC sleeve, colour blue.

Options• Steel lever covered with PVC sleeve, colour blue.


class1602 PN 25 BSP female threaded ends BSP female threaded ends B - 2

DimensionsDN d B L H M Kv Cv Weight["] [mm] [kg]B 10 10 45 41 80 4.1 4.7 0.18˘ 10 10 45 41 80 6.3 7.3 0.19A 15 10 50 43 80 15.5 17.9 0.21C 20 11 59 46 90 31 36 0.35

1 25 13 70 60 90 52 60 0.541B 32 15.5 81 64 115 100 116 0.841A 40 16.5 91 74 125 180 208 12 50 18 108 82 150 350 405 1.7

M

H

d DN

L

B



2008

0301

PN 40, BSP thread• fig. 1607• fig. 1604• fig. 1601


-20°/+150 °C• Full bore• B"– 4"• Female x female thread• Male x male thread• Female x male thread

Econ® brass nickel-plated ball valve with full bore, floating ball, pressure rating PN 40.This ball valve is available in the following variants: with BSP female thread, with BSPmale thread and with BSP female/male thread. Actuated by means of aluminium lever.This type of ball valve is generally applicable e.g. for compressed air, HVAC and watersystems up to maximum 40 bar.

ConstructionFig. 1601, female thread BSP ISO 7/1 Rp (parallel) x male thread BSP ISO 7/1 R(tapered)Fig. 1604, 2 x male thread BSP ISO 7/1 R (tapered)Fig. 1607, 2 x female thread BSP ISO 7/1 Rp (parallel)


B" - 1" PN 40 -20°/+150 °C 40 40 22 [bar]11/4" - 2" PN 25 -20°/+150 °C 25 25 15 [bar]21/2" - 4" PN 16 -20°/+150 °C 16 16 9 [bar]


Body, ball and stem 1) Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal (Secondary) NBRStem seal (Primary) FPM (Viton)Lever 2) Aluminium1) Body nickel plated, ball chromium plated2) Finished with epoxy coating.

Options• Aluminium lever with epoxy coating• Steel lever covered with PVC sleeve• Butterfly handle for fig. 1601, 1604 and 1607, B"– 1”, with epoxy coating• Extended stem• Electric or pneumatic actuation (fig. 1607ISO A" – 2”)


class1607 PN 40 BSP female threaded ends BSP female threaded ends B - 41604 PN 40 BSP male threaded ends BSP male threaded ends A - 21601 PN 40 BSP female threaded ends BSP male threaded ends ˘ - 4

DimensionsFigure DN d B L H M Kv Cv Weight

["] [mm] [kg]1607 B 10 12.5 45 48 80 4.1 4.7 0.121607 ˘ 10 12.5 45 48 80 6.3 7.3 0.121607 A 15 17 59 55 105 15.5 17.9 0.221607 C 20 18 69 66 120 31 36 0.361607 1 25 22 83 70 120 52 60 0.571607 1B 32 24 94 83 135 100 116 0.891607 1A 40 24 102 93 160 180 208 1.151607 2 50 28 124 102 160 350 405 1.771607 2A 65 30 148 143 265 580 671 3.301607 3 80 33 171 153 265 1000 1157 5.371607 4 100 40 206 187 340 1550 1793 8.241604 A 15 16 71 55 105 15.5 17.9 0.231604 C 20 17.5 82 66 120 31 36 0.381604 1 25 21 97.5 70 120 52 60 0.591604 1B 32 22.5 108 83 135 100 116 0.941604 1A 40 22.5 122 93 160 180 208 1.211604 2 50 26.5 146 102 160 350 405 1.911601 ˘ 10 13.5 52 48 80 6.3 7.3 0.141601 A 15 16 66 55 105 15.5 17.9 0.231601 C 20 17.5 76 66 120 31 36 0.371601 1 25 21 91 70 120 52 60 0.591601 1B 32 22.5 101 83 135 100 116 0.911601 1A 40 22.5 113 93 160 180 208 1.181601 2 50 26.5 134 102 160 350 405 1.881601 2A 65 30 164 143 265 580 671 3.611601 3 80 33 187 153 265 1000 1157 4.851601 4 100 40 221 187 340 1550 1793 7.94

d D

L

H

M

B Fig. 1601

d D

H

M

BL

d D

L

H

M

B Fig. 1607

Fig. 1604



2008

0301

PN 40, NPT thread• fig. 1607NPT

• Full bore• Temperature range

-20 °/+150 °C• B” – 4”• Female thread

Econ® figure 1607 brass nickel-plated ball valve with full bore, floating ball and NPTfemale thread connection, pressure rating PN 40. Actuated by means of a steel leverwith PVC sleeve. This type of ball valve is generally applicable e.g. for compressed air,HVAC and water systems up to maximum 40 bar.

Construction2 x female thread NPT ANSI B.1.20.1


B" - 4" PN 40 -20°/+150 °C 40 40 22 [bar]


Body (nickel plated) Brass CuZn40Pb2 2.0402Ball (chromium plated) Brass CuZn40Pb2 2.0402Stem Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal PTFELever 1) Steel1) Galvanised and covered with PVC sleeve.


class1607NPT PN 40 NPT female thread NPT female thread B - 4

DimensionsDN d B L H M Kv Cv Weight["] [mm] [kg]B 10 10 45 41 80 4.1 4.7 0.14˘ 10 10 45 41 80 6.3 7.3 0.15A 15 15 63 54 90 15.5 17.9 0.25C 20 16 71 58 90 31 36 0.4

1 25 19 83 66 125 52 60 0.61B 32 21 92 71 125 100 116 0.951A 40 21 104 80 140 180 208 1.242 50 26 124 88 140 350 405 1.882A 61 27 140 131 250 580 671 3.353 74 28 159 140 250 1000 1157 5.44 95 35 195 156 250 1550 1793 8.84 L

DNd

H

M

B



2008

0301

3-way• fig. 1635L• fig. 1635T


-20°/+150 °C• Reduced bore• B” – 2”• Brass• BSP threaded connection

Econ® figure 1635 three-way ball valve with reduced bore, floating ball supported onfour seats, BSP female thread connection, pressure rating PN 32. This ball valve isavailable with an L or T bore. Actuated by means of steel lever with PVC sleeve. Thistype of ball valve is generally applicable for compressed air, HVAC and water systemsup to maximum 32 bar.

ConstructionBSP female thread ISO 228/1L-bore (with black lever)T-bore (with red lever)


B" - 1" PN 32 -20°/+150 °C 32 32 18 [bar]


Body (nickel plated) Brass CuZn40Pb2 2.0402Ball (chromium plated) Brass CuZn40Pb2 2.0402Stem Brass CuZn40Pb2 2.0402Ball seat PTFEStem seal PTFELever 1) Steel1) With PVC sleeve

Switching possibilities

1 2

3

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1635L

1635T

Lever, black

Lever, red

A B C D

Figure

Ball position

Standard Option

The ball valve is supplied standard for switching between A and B. The lever can beset for switching between C and D as an option.

Ordering informationOrdering code Drilling Pressure Connection Size [inch]

class1635L L PN 32 BSP female threaded ends B - 21635T T PN 32 BSP female threaded ends B - 2

DimensionsDN d B L L1 L2 H M Weight["] [mm] [kg]B 10 12 74 37 22 56 92 0.5˘ 10 12 74 37 22 56 92 0.5A 12 14 80 39 24 60 115 0.7C 15 16 90 46 28 64 115 1

1 20 19 105 52 31 76 150 1.51B 25 21 115 58 35 79 150 1.91A 32 23 138 69 42 110 240 3.42 40 26 161 80 48 117 240 5.2

L

L1

L2

E

M

H

DNd

B

Ball valvesThread, 2 and 3-wayStainless steel


2008

0301

Ind

ex a

nd p

rod

uct

com

par


2-way1000 PSI WOGReduced bore

2-way1000 PSI WOGFull bore

2-way1000 PSI WOGFull boreISO 5211 'Direct Mount'

• Max. 68 bar• Temperature range

-34°/+205 °C• Reduced bore• B"-2"• BSP or NPT

Female thread connection


-34°/+205 °C• Full bore• Lockable lever• Cavity relief hole

In ball• B"-3"• BSP or NPT



-34°/+205 °C• Full bore• ISO 5211 'Direct Mount'

Top-flange• Lockable lever• Double stem sealing

TA-Luft certified• Antistatic design

ATEX guidance 94/9/EC• Cavity relief hole



page 203

3-way1000 PSI WOGReduced boreISO 5211 'Direct Mount'• Max. 68 bar• Temperature range

-34°/+215 °C• Reduced bore• L- and T-port• 4 seats• ISO 5211 'Direct Mount'



ATEX guidance 94/9/EC• B"-2"• BSP or NPT




2008

0301

2-way1000 PSI WOGReduced bore• fig. 7744• fig. 7744NPT


-34°/+205 °C• Reduced bore• B"-2"• BSP or NPT


Econ® one-piece ball valve with reduced bore, floating ball, BSP or NPT femalethread connection, pressure rating 1000 PSI WOG, fitted with blow-out proof stem.This ball valve is available in stainless steel 1.4408. Actuated by means of a lever withPVC sleeve. This type of ball valve is generally applicable e.g. for compressed air,HVAC, fuel and lightly corrosive systems up to maximum 68 bar.

Construction• BSP (DIN 259) or NPT (ASME B1.20.1) female thread

Pressure and temperature rangeSize Temperature range -34 °C +38 °C +100 °C +150 °C +205 °CB"-2" -34 °C/+205 °C 68 68 44 22 0 [bar]

Pressure rating 1000 PSI WOG

Material specificationComponent Material EN and/or (DIN) W.nr.Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFEStem seal PTFELever 1) Stainless steel X5CrNi18-10 1.43011) Covered with PVC sleeve, color blue.

OptionsAvailable with EN 10204-3.1 material and test certificate

Ordering informationOrdering code Material Connection DN

["]7744 SS 316 BSP female threaded ends B - 27744NPT SS 316 NPT female thread B - 2

DimensionsDN d H L M SW Weight["] [mm] [kg]B 5 34 41.5 70 17 0.06˘ 7 35 47.5 80 21 0.10A 9.1 44 58 92 25 0.18C 12.5 46 61 92 32 0.22

1 15 51 73.5 115 38 0.411B 20 58 78 115 48 0.641A 25 66 85 127 53 0.842 32 72 102 127 66 1.47 L

d DN

M

H

SW



2008

0301

2-way1000 PSI WOGFull bore• fig. 7752• fig. 7752NPT





Econ® two-piece ball valve with full bore, floating ball, BSP or NPT female threadconnection, pressure rating 1000 PSI WOG, fitted with blow-out proof stem. This ballvalve is available in stainless steel 1.4408. Actuated by means of a lockable lever withPVC sleeve. This type of ball valve is generally applicable e.g. for compressed air,HVAC, fuel and lightly corrosive systems up to maximum 68 bar.


Pressure and temperature rangeSize Temperature rating -34 °C +38 °C +100 °C +150 °C +205 °CB"-2" -34 °C/+205 °C 68 68 44 22 0 [bar]

21 /2"-3" -34 °C/+205 °C 50 50 32 16 0 [bar]Pressure rating 1000 PSI WOG

Material specificationComponent Material EN and/or (DIN) W.nr.Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFEStem seal PTFELever 1) Stainless steel X5CrNi18-10 1.43011) Covered with PVC sleeve, color blue.

OptionsAvailable with EN 10204-3.1 material and test certificate


["]7752 SS 316 BSP female threaded ends B - 37752NPT SS 316 NPT female thread B - 3

DimensionsDN d H L M SW Weight["] [mm] [kg]B 10.6 58 58 100 22 0.30˘ 12 58 58 100 22 0.30A 15 58 62 100 25 0.33C 20 64 72.4 129 32 0.51

1 25 77 85 156 41 0.901B 32 83 94 156 50 1.241A 38 96 105 182.5 56 1.882 50 102 125 182.5 70 2.902A 63.5 129 155 252 83 6.453 76 138 173 252 102 8.40 L

d DN

H

M

SW



2008

0301

2-way1000 PSI WOGFull boreISO 5211 'Direct Mount'• fig. 7752ISO• fig. 7752ISO-NPT








Econ® two-piece ball valve with full bore, floating ball, BSP or NPT female threadconnection, pressure rating 1000 PSI WOG, antistatic design (ball-spindle-body) acc.to ATEX guidance 94/9/EC, double self adjusting stem sealing according to TA-Luftrequirements, blow-out proof stem and ISO 5211 "Direct Mount" top-flange. This ballvalve is available in stainless steel 1.4408. Actuated by means of a lockable lever withPVC sleeve. This type of ball valve is generally applicable e.g. for compressed air,HVAC, fuel and lightly corrosive systems up to maximum 68 bar.



21 /2"-3" -34 °C/+205 °C 50 50 32 16 0 [bar]Pressure rating 1000 PSI WOG

Material specificationComponent Material EN and/or (DIN) W.nr.Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFEStem seal PTFEO-ring FKM (Viton)Lever 1) Stainless steel X5CrNi18-10 1.43011) Covered with PVC sleeve, color blue.

Options• Available with EN 10204-3.1 material and test certificate• Electric or pneumatic actuator


["]7752ISO SS 316 BSP female threaded ends B - 37752ISO-NPT SS 316 NPT female thread B - 3

DimensionsDN d H F H1 L M SW N1 N2 nxO1 nxO2 E Weight["] [mm] [kg]B 10.6 42 9 72 64 145 27 36 42 4x6 4x6 9 0.43˘ 12.7 42 9 72 64 145 27 36 42 4x6 4x6 9 0.40A 15 42 9 72 64 145 27 36 42 4x6 4x6 9 0.45C 20 49 9 80 70.4 145 32 36 50 4x6 4x7 9 0.59

1 25 58 11 90 85 175 41 42 50 4x6 4x7 11 1.041B 32 63 11 95 94 175 50 42 70 4x6 4x9 11 1.421A 38 71.5 14 106 105 194 56 50 70 4x7 4x9 14 2.182 50 78 14 113 125 194 70 50 70 4x7 4x9 14 3.602A 63.5 100 17 150 155 265 83 70 102 4x9 4x11 17 6.543 76 109 17 159 173 265 102 70 102 4x9 4x11 17 9.17 L

d DN

HH1

M

F

4xO24xO1

SW E

N2

N1



2008

0301

3-way1000 PSI WOGReduced boreISO 5211 'Direct Mount'• fig. 7760L• fig. 7760L-NPT• fig. 7760T• fig. 7760T-NPT


-34°/+215 °C• Reduced bore• L- and T-port• 4 seats• ISO 5211 'Direct Mount'



ATEX guidance 94/9/EC• B"-2"• BSP or NPT


Econ® three-way ball valve with reduced bore, floating ball, BSP or NPT female threadconnection, pressure rating 1000 PSI WOG, anti-static design (ball-spindle-body) acc.to ATEX guidance 94/9/EC, double self adjusting stem sealing according to TA-Luftrequirements, blow-out proof stem and ISO 5211 "Direct Mount" top-flange. This ballvalve is available in stainless steel 1.4408, has standard 4 supporting seats and isavailable with L or T port. Actuated by means of a lockable lever with PVC sleeve. Thistype of ball valve is generally applicable e.g. for compressed air, HVAC, fuel andlightly corrosive systems up to maximum 68 bar.

Construction• BSP (DIN 259) or NPT (ASME B1.20.1) female thread• L- or T-bore



Material specificationComponent Material EN and/or (DIN) W.nr.Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat R-PTFEStem seal PTFEO-ring FKM (Viton)Lever 1) Stainless steel X5CrNi18-10 1.43011) Covered with PVC sleeve, color blue.

Options• Available with EN 10204-3.1 material and test certificate• Electric or pneumatic actuation


1 2

3

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

1

3

2

7760L

7760T

Lever, blue

Lever, blue

A B C D

Figure

Ball position

Standard Option

Standard flow plan of ball valve is from A to B.Alternatively the handlever can be changed for switching from C to D.

Ordering informationOrdering code Material Drilling Connection DN

["]7760L SS 316 L BSP female threaded ends B - 27760T SS 316 T BSP female threaded ends B - 27760L-NPT SS 316 L NPT female thread B - 27760T-NPT SS 316 T NPT female thread B - 2

DimensionsDN d H F H1 L L1 M SW N1 N2 nxO1 nxO2 E Weight["] [mm] [kg]B 11 42 9 70 79 39.5 147 27 36 42 4x6 4x6 9 0.92˘ 11 42 9 70 79 39.5 147 27 36 42 4x6 4x6 9 0.80A 11 42 9 70 79 39.5 147 27 36 42 4x6 4x6 9 0.84C 15 49 9 77 88 44 147 34 36 50 4x6 4x7 9 1.07

1 20 59.5 11 87 108 54 176.5 41 42 50 4x6 4x7 11 1.921B 25 63 11 93 124 62 176.5 50 42 70 4x6 4x9 11 3.011A 32 73.5 14 103 135 67.5 215 56 50 70 4x7 4x9 14 4.202 40 82.8 14 113 164 82 215 70 50 70 4x7 4x9 14 7.02 L

d DN

H

H1

F

M

SW E

N1

N2

4xO24xO1

L

Ball valves3-piece, 2-waySteel and stainless steel


2008

0301

Index and

pro

duct co

mp

are

page 205 page 206 page 207

Stainless steel1000 PSI WOGFull bore

Stainless steel1000 PSI WOGFull boreISO 5211 'Direct Mount'

Steel or stainless steelASME 600#Full or reduced boreISO 5211 'Direct Mount'




Female thread connection• BW or SW

Weld connection








Weld connection


-29°/+220 °C• Full or reduced bore• ISO 5211 'Direct Mount'

Top-flange• Lockable lever• Fire Safe certified

BS6755 Part 2• Antistatic design




Weld connection



2008

0301

Stainless steel1000 PSI WOGFull bore• fig. 7446• fig. 7546• fig. 7646BW• fig. 7646SW





Weld connection

Econ® three-piece ball valve with full bore, floating ball, thread or weld connection,pressure rating 1000 PSI WOG, fitted with blow-out proof stem. Actuated by means ofa lockable lever with PVC sleeve. This type of ball valve is generally applicable inindustrial systems such as water, gas, and corrosive media, up to maximum 68 bar.The unique three-piece construction makes it possible to inspect or repair these ballvalves easily. The body can be removed from the pipe section, complete with ball andsealing rings, and refitted without removing the connection piece.

Construction• Stainless steel• Thread connection: BSP (DIN 259) or NPT (ASME B1.20.1) female thread• Weld connection: BW (ASME B16.25 schedule 40) or SW (ASME B16.11)

Pressure and temperature rangeSize Temperature range -34 °C +38 °C +100 °C +150 °C +205 °C

B" - 2" -34°/+205 °C 68 68 44 22 0 [bar]21/2" - 3" -34°/+205 °C 50 50 32 16 0 [bar]


Material specificationComponent Material EN and/or (DIN) W.nr.Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408End caps Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFEStem seals PTFELever 1) Stainless steel X5CrNi18-10 1.43011) Covered with PVC sleeve, color blue

Options• Available with EN 10204-3.1 material and test certificate


["]7446 SS 316 BSP female threaded ends B - 37546 SS 316 NPT female thread B - 37646BW SS 316 Weld BW B - 37646SW SS 316 Weld SW B - 3

DimensionsDN d H L BW SW M Weight

L2 B3 B2 L1 B1["] [mm] [kg]B 10.6 57.5 65.2 65.2 17.8 9.3 65.2 14.2 100 0.5˘ 12.7 57.5 65.2 65.2 17.8 12.5 65.2 17.8 100 0.5A 15 57.5 69.5 75 22 15.8 69.5 21.8 100 0.5C 20 63 80 90 28.2 21.0 80 27.3 129 0.7

1 25 75.5 90 100 34 26.7 90 34 156 1.41B 32 81 110 110 43.5 35.1 110 42.8 156 1.81A 38 94 120 125 50.4 40.9 120 48.9 182.5 2.52 50 104.5 140 150 61.5 52.5 140 61.4 182.5 3.72A 63.5 131 185 190 77.3 62.7 185 74 252 7.03 76 139 205 220 93 78.0 205 90 252 10.5

L

d DN

H

M

d

L1L2

B1 B2 B3

H

M

fig. 7646 (BW/SW)

fig. 7446/7546 (BSP/NPT)

SW BW



2008

0301

Stainless steel1000 PSI WOGFull boreISO 5211 'Direct Mount'• fig. 7444• fig. 7544• fig. 7644BW• fig. 7644SW








Weld connection

Econ® three-piece ball valve with full bore, floating ball, thread or weld connection,pressure rating 1000 PSI WOG, antistatic design (ball-spindle-body) acc. to ATEXguidance 94/9/EC, double self adjusting stem sealing according to TA-Luftrequirements, blow-out proof stem and ISO 5211 "Direct Mount" top-flange. Actuatedby means of a lockable lever or T-bar with PVC sleeve. This type of ball valve isgenerally applicable in industrial systems such as water, gas, and corrosive media, upto maximum 68 bar.The unique three-piece construction makes it possible to inspect or repair these ballvalves easily. The body can be removed from the pipe section, complete with ball andsealing rings, and refitted without removing the connection pieces.

Construction• Stainless steel• Thread connection: BSP (DIN 259) or NPT (ASME B1.20.1) female thread• Weld connection: BW (ASME B16.25 schedule 40) or SW (ASME B16.11)

Pressure and temperature rangeSize Temperature range -34 °C +38 °C +100 °C +150 °C +205 °C

B" - 2" -34°/+205 °C 68 68 44 22 0 [bar]21/2" - 4" -34°/+205 °C 50 50 32 16 0 [bar]



Body & end caps Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408End caps (BW/SW) Stainless steel X2CrNiMo17-12-2 (G-X2CrNiMo18 10) 1.4404Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFEStem seals PTFEO-ring FKM (Viton)Lever 1) Stainless steel X5CrNi18-10 1.4301T-bar (4") 1) Galvanised steel1) Covered with PVC sleeve, color blue

Options• Available with EN 10204-3.1 material and test certificate• Electric or pneumatic actuation


["]7444 SS 316 BSP female threaded ends B - 47544 SS 316 NPT female thread B - 47644BW SS 316 Weld BW B - 47644SW SS 316 Weld SW B - 4

N2N1

E

4 x O1 4 x O2

DimensionsDN d H F H1 L BW SW M N1 N2 4x E Weight

L2 B3 B2 L1 B1 O1 O2["] [mm] [kg]B 10.6 42 9 72 75 70 22 9.3 75 14.2 145 36 42 6 6 9 0.7˘ 12.7 42 9 72 75 70 22 12.5 75 17.8 145 36 42 6 6 9 0.7A 15 42 9 72 75 75 22 15.8 75 21.8 145 36 42 6 6 9 0.7C 20 48.5 9 80 80 90 28.2 21.0 80 27.3 145 36 50 6 7 9 0.9

1 25 58 11 90 90 100 34 26.7 90 34 175 42 50 6 7 11 1.41B 32 63 11 95 110 110 43.5 35.1 110 42.8 175 42 70 6 9 11 2.11A 38 71 14 106 120 125 50.4 40.9 120 48.9 194 50 70 7 9 14 3.02 50 78 14 113 140 150 61.5 52.5 140 61.4 194 50 70 7 9 14 4.32A 63.5 100 17 149 185.5 190 77.3 62.7 185.5 74 265 70 102 9 11 17 8.33 76 109 17 159 205 220 93 78.0 205 90 265 70 102 9 11 17 11.94 100 140 22 205 240 270 116 102.3 240 115.4 400 - 102 - 11 22 22.7

L

d DN

HH1

M

SW BW

L1L2

B1 d B2 B3

H

H1

M

fig. 7644 (BW/SW)

fig. 7444/7544 (BSP/NPT)

F

F



2008

0301

Steel or stainless steelASME 600#Full or reduced boreISO 5211 'Direct Mount'• fig. 7422• fig. 7522• fig. 7622BW• fig. 7622SW• fig. 7442• fig. 7542• fig. 7642BW• fig. 7642SW


-29°/+220 °C• Full or reduced bore• ISO 5211 'Direct Mount'

Top-flange• Lockable lever• Fire Safe certified

BS6755 Part 2• Antistatic design




Weld connection

Econ® Premium three-piece ball valve with full or reduced bore, floating ball,threaded or welded connection, antistatic design (ball-spindle-body) acc. to ATEXguidance, self adjusting stem sealing, seperated ball and body seals, blow-out proofstem and ISO 5211 'Direct Mount' top-flange. Actuated by means of a lockable leverwith PVC sleeve. This type of ball valve is generally applicable in industrial systemssuch as steam, water, gas, and corrosive media, up to maximum 102 bar.The unique three-piece construction makes it possible to inspect or repair these ballvalves easily. The body can be removed from the pipe section, complete with ball andsealing rings, and refitted without removing the connection pieces.

Construction• Material: Steel or stainless steel• Bore: Full or reduced• Execution: Standard or Fire Safe acc. to BS6755/2 (max. 1.1/2" full or 2" reduced)• Thread connection: BSP (ISO 228) or NPT (ASME B1.20.1) female thread• Weld connection: BW (ASME B16.25 schedule 40) or SW (DIN 3239-2)

Pressure and temperature rangeSize 1) Temperature range -29 +38 +100 +150 +205 +220 [°C]

full boreB" - 1" -29°/+220 °C 102 102 93 65 17 0 [bar]

11/4" - 11/2" -29°/+220 °C 80 80 80 48 12 0 [bar]2 " -29°/+220 °C 76 76 60 37 9 0 [bar]21/2" -29°/+220 °C 60 60 60 37 9 0 [bar]3 " -29°/+220 °C 51 51 50 30 8 0 [bar]

1) For reduced bore, please apply one size smaller


Steel version, Fig. 7422, 7522 and 7622 (BW/SW)Body Cast steel GP240GH + N (GS-C25N) 1.0619 + NEnd caps Cast steel GP240GH + N (GS-C25N) 1.0619 + N

SS version, Fig. 7442, 7542 en 7642 (BW/SW)Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408End caps Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408End caps (BW/SW) Stainless steel GX2CrNiMo19-11-2 (X-3CrNiMo145) 1.4409

All modelsBall Stainless steel X5CrNiMo17-12-2 1.4401Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat R-PTFEStem seal 1) R-PTFEBody gaskets 1) R-PTFELever 2) Stainless steel X5CrNi18-10 1.4301

1) Fire-Safe versionStem seal GraphiteBody gaskets Graphite2) Covered with PVC sleeve, color: BSP/BW/SW = blue, NPT = red,BSP/BW/SW fire-safe = dark green and NPT fire-safe = light green

Options• Available with EN 10204-3.1 material and test certificate• Extended bonnet (fig. 7411) for mounting of actuator• Extended bonnet (fig. 7410) for isolating or low temp. applications upto -50 °C• Electric or pneumatic actuation• Other seatings; like graphite filled PTFE, UHMWP or PEEK



2008

0301

Stem extensions

Fig. 7411 Fig. 7410

Ordering informationOrdering code Material Bore Connection Fire- DN

Safe ["]7422 Steel reduced or full BSP female threaded ends Yes / No B - 47522 Steel reduced or full NPT female thread Yes / No B - 47622BW Steel reduced or full Weld BW Yes / No B - 47622SW Steel reduced or full Weld SW Yes / No B - 47442 SS 316 reduced or full BSP female threaded ends Yes / No B - 47542 SS 316 reduced or full NPT female thread Yes / No B - 47642BW SS 316 reduced or full Weld BW Yes / No B - 47642SW SS 316 reduced or full Weld SW Yes / No B - 4

DimensionsDN d H F H1 L BW red BW full SW M N1 N2 4x E Weight

red full B3 B2 B3 B2 red vol O1 O2B1

["] [mm] [kg]- B 12.7 35 11 77 67 - - 13.7 9.2 - 14.1 120 36 - 6 - 5 0.7A ˘ 12.7 35 11 77 67 21.3 15.8 17.1 12.5 22.4 17.5 120 36 - 6 - 5 0.7C A 15 40 12 82 72 26.7 21 21.3 15.8 27.4 22.4 135 36 - 6 - 6.3 0.9

1 C 20 46 14 90 97 33.4 26.6 26.7 21 34.2 27.4 170 50 - 7 - 8 1.51B 1 25 53 14 97 110 42.2 35.1 33.4 26.6 43 34.2 170 50 - 7 - 8 1.91A 1B 31.8 61 22 110 118 48.3 40.9 42.2 35.1 49 43 205 50 70 7 9 9.5 3.22 1A 38.1 65 22 115 130 60.3 52.5 48.3 40.9 61.1 49 205 50 70 7 9 9.5 4.22A 2 50.8 80 25 130 142 76.1 68.9 60.3 52.5 77.1 61.1 205 - 70 - 9 11 6.33 2A 65 100 33 170 174 88.9 77.9 76.1 68.9 90.2 77.1 255 70 102 9 11 17 9.94 3 76 119 33 188 193 114.3 102.3 88.9 77.9 115.1 90.2 255 - 102 - 11 17 16.5

M

H1F

H

d

L

DN

M

FH1

SW BW

B1 d

L

H

B3B2

Fig. 7622/7642 (BW/SW)

Fig. 7422/7442 (BSP)Fig. 7522/7542 (NPT)

N2

N1

E

4x024x01

Ball valvesHigh pressure, 2-waySteel and stainless steel


2008

0301

High pressure ballvalves• fig. 1950• fig. 1952• fig. 1953

• PN 350 and higher• Temperature range

-20°/+90 °C• Standard bore• D” – 2”• BSP or NPT

Female thread connection• Male thread, for compression

ring fitting

Econ® block ball valves with standard bore and floating ball, suitable for operatingpressures up to 500 bar, fitted with blow-out proof stem. This ball valve is available insteel or stainless steel 1.4401. These valves are available with BSP or NPT femalethread or connections for bite type union in light or heavy version. Actuated by meansof steel lever. This ball valve is used in water and hydraulic systems at high pressure,up to a maximum of 500 bar.

Pressure and temperature rangeSize Temperature range Material/maximum operating pressure

D" - A" -20°/+90 °C Steel/500 bar SS/400 barC" -20°/+90 °C Steel/400 bar SS/400 bar

1 " -20°/+90 °C Steel/350 bar SS/400 bar11/4" - 2" -20°/+90 °C Steel/420 bar SS/350 bar


All modelsStem seal NBRLever 1) Steel

Steel versionBody, ball and stem SteelBall seat (D" - 1") PA (Nylon)Ball seat (1B" - 2") POM (Delrin)

SS versionBody, ball and stem Stainless steel X6CrNiMoTi17-12-2 1.4571Ball seat POM (Delrin)1) Galvanised

Options• Three-way or multi-way version (fig. 1960 and 1970)• Flange connection• Other sealing materials• Forged steel bodies for D” – 1” for higher operating pressures up to 600 bar• For swivel nut and cutting ring as required for fig. 1952 and 1953, see fig. 3323 and

3311, or fig. 3523 and 3511 for SS

Ordering informationOrdering code Bore Connection Material Size [inch]1950 Full bore NPT or BSP female thread Steel or SS D - 21952 Full bore Compression ring fitting, light version Steel or SS D - 1A1953 Full bore Compression ring fitting, heavy version Steel or SS D - 1B

DimensionsDN d B H M Fig. 1950 Fig. 1952 Fig. 1953

L Weight D L RA Weight D L RA Weight["] [mm] [kg] [mm] [kg] [mm] [kg]D 5 9 59 107 69 0.35 M12 x 1.5 67 6 0.30 M14 x 1.5 71.5 6 0.35B 6 12 59 107 69 0.35 M14 x 1.5 67 8 0.30 M18 x 1.5 73 10 0.35˘ 10 12 61 107 73 0.50 M18 x 1.5 75 12 0.50 M22 x 1.5 84 14 0.50A 13 14 77 107 85 0.65 M22 x 1.5 84 15 0.60 M24 x 1.5 91 16 0.60C 20 17 92 165 96 1.5 M30 x 2 102 22 1.5 M36 x 2 110 25 1.5

1 24 19 98 165 113 2.0 M36 x 2 108 28 2.0 M42 x 2 120 30 2.11B 32 20 93 210 110 3.2 M45 x 2 128 35 3.0 M52 x 2 140 38 3.11A 38 22 111 210 120 4.0 M52 x 2 133 42 3.8 -- -- -- --2 48 28 127 210 140 5.9 -- -- -- -- -- -- -- --

M

H

d DN

BL

Fig. 1950/Fig. 1950SS

M

H

RA D

B

d

L

Fig. 1952/Fig. 1952SS

Fig. 1953/Fig. 1953SS

M

H

RA D

B

d

L

Ball valvesDIN wafer type, 2-waySteel and stainless steel


2008

0301

ECON®PN 16 - PN 40Full boreISO 5211 'Direct Mount'• fig. 7343• fig. 7383

• PN 16 – PN 40• Temperature range




ATEX guidance 94/9/EC• Cavity relief hole in ball• DN 15 - 150

Econ® wafer ball valve with full bore, floating ball and flange connection to DIN PN 16or PN 40. Actuated by means of a lever or T-bar. This type of ball valve is generallyused in industrial systems such as steam, water, gases, and corrosive media, up to amaximum of 40 bar (PN 40 version).

Construction•DIN PN 16 or PN 40 •Steel 1.0619 or stainless steel 1.4408

Features• Design: DIN 3357/1.2, EN 12516-1, Flanges: EN 1092-1• Testing: EN 12266 rate A (100% tight)

Pressure and temperature rangeSize Figure Pressure Temperature -30 +50 +100 +150 +200 +230 [°C]

rating rangeDN 15-DN200 7343/7383 PN 16 -30°/+230 °C 16 15 13 13 11 7.6 [bar]DN 15-DN50 7343 PN 40 -30°/+230 °C 39 37 34 32 19 7.6 [bar]DN 65-DN100 7343 PN 40 -30°/+230 °C 39 37 34 28 16 7.6 [bar]DN 15-DN50 7383 PN 40 -30°/+230 °C 39 37 33 30 19 7.6 [bar]DN 65-DN100 7383 PN 40 -30°/+230 °C 39 37 33 28 16 7.6 [bar]DN 125-DN200 7343/7383 PN 40 -30°/+230 °C 30 28 25 19 12 7.6 [bar]


Steel version, Fig. 7343Body Cast steel GP240GH (GS-C25) 1.0619Ball Stainless steel GX5CrNi19-10 (G-X6CrNi18 9) 1.4308Stem Stainless steel X5CrNi18-10 1.4301

SS version, Fig. 7383Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401

All modelsBall seat PTFE (TFM1600)Stem seal PTFEO-ring FKM (Viton)Body gasket PTFELever (DN 15 - 80) 1) Stainless steel X5CrNi18-10 1.4301T-bar (DN 100 - 150) 1) Galvanised steel1) Covered with PVC sleeve, color blue

Options• Available with EN 10204-3.1 material and test certificate• Gearbox, electric or pneumatic actuation

Ordering informationOrdering code Body Pressure rating Size [mm]7343 Steel PN 16 or PN 40 DN 15 - 1507383 Stainless steel PN 16 or PN 40 DN 15 - 150

DimensionsDN d L M H F H1 N1 N2 nxO1 nxO2 E Weight

[mm] [kg]15 15 42 145 49 9 77 36 42 4x6 4x6 9 1.420 20 44 145 55 9 82 36 42 4x6 4x6 9 1.825 25 50 175 62 11 94 42 50 4x6 4x7 11 2.432 32 60 175 72 11 104 42 50 4x6 4x7 11 3.940 38 65 194 78 14 114 50 70 4x7 4x9 14 4.950 50 80 194 86 14 120 50 70 4x7 4x9 14 8.665 63.5 110 265 108 17 158 70 102 4x9 4x11 17 10.180 76 120 265 116 17 165 70 102 4x9 4x11 17 14.5

100 95 150 400 139 22 182 -- 102 -- 4x11 22 22.7125 118 180 600 176 27 224 -- 125 -- 4x14 27 50150 142 225 800 192 27 268 -- 125 -- 4x14 27 70

M

F

DN

H1

d

H

DN15 - 80

L

DN100 - 150

M

Ball valvesDIN flanges, 2-waySteel and stainless steel


2008

0301

Ind

ex a

nd p

rod

uct

com

par

epage 212 page 213

ECON®PN 16 - PN 40Full boreISO 5211 'Direct Mount'

BACPN 16 - PN 40Full boreISO 5211 / CAPI


-30°/+230 °C• ISO 5211 'Direct Mount'



ATEX guidance 94/9/EC• Fire-Safe acc.to

API607 5th editionAnd ISO10497

• SS executionTo NACE MR01-75

• Cavity relief hole in ball• DN 15 - 200


-30°/+230 °C• ISO 5211 / CAPI top-flange• Double stem sealing


ATEX guidance 94/9/EC• Fire-safe to

BS 6755 part 2• Trim mat. acc. to NACE

MR0175• Cavity relief hole in ball• Long and short F/F• Brand BAC, type FB(L)• DN 15 - 200



2008

0301

ECON®PN 16 - PN 40Full boreISO 5211 'Direct Mount'• fig. 7249• fig. 7289


-30°/+230 °C• ISO 5211 'Direct Mount'






• Cavity relief hole in ball• DN 15 - 200

Econ® two-piece ball valve with full bore, floating ball and flange connection to DINPN 16 or PN 40. Actuated by means of a lever, T-bar or gearbox. This type of ball valveis generally used in industrial systems such as steam, water, gases, and corrosivemedia, up to a maximum of 40 bar (PN 40 version).

Construction•DIN PN 16 or PN 40 •Steel 1.0619 or stainless steel 1.4408

Features• Design: EN ISO 17292, EN 12516 • Face to face length: EN 558-1, 27 (short)• Flange ends: EN 1092-1 • Testing: EN 12266 rate A (100% tight)


rating rangeDN 15-DN200 7249/7289 PN 16 -30°/+230 °C 16 15 13 13 11 7.6 [bar]DN 15-DN50 7249 PN 40 -30°/+230 °C 39 37 34 32 19 7.6 [bar]DN 65-DN100 7249 PN 40 -30°/+230 °C 39 37 34 28 16 7.6 [bar]DN 15-DN50 7289 PN 40 -30°/+230 °C 39 37 33 30 19 7.6 [bar]DN 65-DN100 7289 PN 40 -30°/+230 °C 39 37 33 28 16 7.6 [bar]DN 125-DN200 7249/7289 PN 40 -30°/+230 °C 30 28 25 19 12 7.6 [bar]




All modelsBall seat PTFE (TFM1600)Stem seal GraphiteO-ring FKM (Viton)Body gasket (spiralwound) Stainless steel X5CrNiMo17-12-2 1.4401Lever (DN 15 - 80) 1) Stainless steel X5CrNi18-10 1.4301T-bar (DN 100 - 150) 1) Galvanised steel1) Covered with PVC sleeve, color blueNote: DN 200 is being supplied without operator. A gearbox is available on request.

Options• Available with EN 10204-3.1 material and test certificate• Gearbox, electric or pneumatic actuation• Carbon filled PTFE seats for steam applications

Ordering informationOrdering code Bore Body Pressure rating DN [mm]7249 Full bore Steel PN 16 or PN 40 15 - 2007289 Full bore SS 316 PN 16 or PN 40 15 - 200

DimensionsDN d L L1 M H F H1 N1 N2 nxO1 nxO2 E Weight Operation

PN 16 PN 40 PN 16 PN 40[mm] [kg]

15 15 115 -- 49.5 145 48 9 79 36 42 4x6 4x6 9 -- 2.4 lever20 20 120 -- 54 145 53 9 84 36 42 4x6 4x6 9 -- 3.2 lever25 25 125 -- 56 175 58.5 11 90.5 42 50 4x6 4x7 11 -- 4.2 lever32 32 130 -- 57.4 175 71 11 103 42 50 4x6 4x7 11 -- 5.5 lever40 38 140 -- 58 194 76 14 111 50 70 4x7 4x9 14 -- 6.9 lever50 50 150 -- 63 194 85 14 120 50 70 4x7 4x9 14 -- 9.5 lever65 63.5 170 69 64 265 101.5 17 150 70 102 4x9 4x11 17 13.8 13.8 lever80 76 180 74.5 69.5 265 111.5 17 160 70 102 4x9 4x11 17 17.7 17.8 lever

100 100 190 83 78 400 140 22 182 -- 102 -- 4x11 22 25.2 30.5 T-bar125 125 325 153 160 600 183 27 260 -- 125 -- 4x14 27 60 62.5 T-bar150 150 350 162 176 800 202 27 280 -- 125 -- 4x14 27 71.8 73.8 T-bar200 200 400 191 221 -- 252.5 27 279.5 -- 125 -- 4x14 27 127 152 Bare shaft

M

F

H1H

d

L1

DN 100 - 150with T-bar

L

N2N1

E

4x014x02



2008

0301

BACPN 16 - PN 40Full boreISO 5211 / CAPI• fig. 7239• fig. 7259• fig. 7349• fig. 7389





BS 6755 part 2• Trim mat. acc. to NACE

MR0175• Cavity relief hole in ball• Long and short F/F• Brand BAC, type FB(L)• DN 15 - 200

BAC two-piece ball valve with full bore, floating ball and flange connection to DIN PN16 or PN 40. Actuated by means of a lever, T-bar or gearbox. This type of ball valve isgenerally used in industrial systems such as steam, water, gases, and corrosive media,up to a maximum of 40 bar (PN 40 version).

Construction• DIN PN 16 or PN 40• Steel 1.0619 or stainless steel 1.4408• Short f/f length (EN 558-1.27) or long f/f length (EN 558-1.1)

Features• Design: DIN 3357, ISO 17292 • BV, DNV and GL type approval• Flange ends: EN 1092-1 • Testing: EN 12266 rate A (100% tight)

Pressure and temperature rangeSize Pressure rating Temperature range -30 +50 +100 +150 +200 +230 [°C]

DN 15-DN50 PN 16 -30°/+230 °C 16 15 14 13 11 0 [bar]DN 65-DN150 PN 16 -30°/+230 °C 16 15 14 13 9 0 [bar]DN 200 PN 16 -30°/+230 °C 16 15 14 13 6 0 [bar]DN 15-DN50 PN 40 -30°/+230 °C 39 37 34 30 13 0 [bar]DN 65-DN150 PN 40 -30°/+230 °C 39 37 33 26 9 0 [bar]DN 200 PN 40 -30°/+230 °C 34 32 22 16 6 0 [bar]


Steel version, Fig. 7239 and 7349Body (DN 15 - 65) Forged steel C22G2 (C 22.8) 1.0460Body (DN 80 - 200) Cast steel GP240GH + N (GS-C25N) 1.0619 + NBall (DN 15 - 65) Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball (DN 80 - 200) Stainless steel GX5CrNi19-10 (G-X6CrNi18 9) 1.4308Stem (DN 15 - 65) Stainless steel X5CrNiMo17-12-2 1.4401Stem (DN 80 - 200) Stainless steel X5CrNi18-10 1.4301

SS version, Fig. 7259 and 7389Body and ball (DN 15 - 200) Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem (DN 15 - 200) Stainless steel X5CrNiMo17-12-2 1.4401

All modelsBall seat PTFE (TFM1600)Stem seal (Prim./Sec.) PTFE/GraphiteO-ring Viton (PTFE coating)Body gasket (Prim./Sec.) PTFE/GraphiteLever (DN 15 -65) Stainless steel X5CrNi18-10 1.4301T-bar (DN 80 - 200) Galvanised steel

Options• EN 10204 3.1 certificate • Stem extension• Electric/pneumatic actuation • Cryogenic version down to -196 °C• Other sealing materials • Heating jacket

Ordering informationOrdering code Bore Body Face To Face Pressure rating DN [mm]7239 Full bore Steel Long, EN 558-1.1 (DIN 3202-F1) PN 16 or PN 40 15-1007349 Full bore Steel Short, EN 558-1, 27 (DIN 3202-F18) PN 16 or PN 40 15 - 2007259 Full bore SS 316 Long, EN 558-1.1 (DIN 3202-F1) PN 16 or PN 40 15-1007389 Full bore SS 316 Short, EN 558-1, 27 (DIN 3202-F18) PN 16 or PN 40 15 - 200

DimensionsDN d L L1 M H H1 Weight short Weight long Operation

short long PN 16 PN 40 PN 16 PN 40[mm] [kg]

15 14 115 130 55 150 83 44 -- 2.8 -- 3.5 lever20 19 120 150 53 200 93 52 -- 3.6 -- 4.2 lever25 24 125 160 55 200 104 58 -- 4.9 -- 5.2 lever32 30 130 180 56 240 116 66.5 -- 7.1 -- 7.6 lever40 38 140 200 60.5 240 121 72 -- 8.3 -- 8.9 lever50 50 150 230 63 290 145 89 -- 13 -- 13 lever65 62 170 290 72 290 161 95.5 16 17 18 18 lever80 76 180 310 77 350 181 117 22 24 26 27 T-bar

100 100 190 350 86 350 207 135 31 34 37 39 T-bar125 120 325 -- 140 550 225 173 56 61 -- -- T-bar150 151 350 -- 175 550 284 195 69 75 -- -- T-bar200 202 400 -- 200 700 331 237 120 135 -- -- T-bar

M

H

H1DN

LL1

DN 15 - 65

L1

H1

A DN

M

L

DN80 - 200

H

Ball valvesDIN flanges, 2-wayCast Iron, ductile cast iron and bronze


2008

0301

Full bore• fig. 1942M• fig. 1942R• fig. 1937M• fig. 1937R• fig. 1943


-20°/+150 °C• Full bore• DN 20 - 200• Cast iron, figure 1942• Ductile cast iron, figure 1937

with DVGW type approval• Bronze, figure 1943• Face To Face

EN 558-1.14/1.15(DIN 3202-F4/F5)

Econ® ball valve with full bore, floating ball and flange connection rated DIN PN 16.This ball valve is available in cast iron, ductile cast iron and bronze. Actuated by lever.Also available with a pneumatic or electric actuator. This type of ball valve is generallyused in heating, air conditioning and industrial systems for water and gases up to amaximum of 16 bar (PN 16 version). Figure 1937 is DVGW type approved for gas.

Pressure and temperature rangeSize Figure Pressure

ratingTemperature range -20 °C -10 °C +70 °C +90 °C +150 °C

DN 20 - DN 200 1937M/R PN 16 -10°/+70 °C - 16 16 - - [bar]DN 20 - DN 200 1942M/R PN 16 -10°/+150 °C - 16 16 16 8 [bar]DN 20 - DN 200 1943 PN 16 -20°/+150 °C 16 16 16 16 8 [bar]


All modelsBall seat (+graphite) PTFELever (lacquered) Steel

Fig. 1942MBody Cast iron GJL-250 (GG-25) 0.6025Ball and stem Brass CuZn40Pb2 2.0402O-rings NBR

Fig. 1942RBody Cast iron GJL-250 (GG-25) 0.6025Ball and stem Stainless steel X5CrNi18-10 1.4301O-rings NBR

Fig. 1937MBody Ductile cast iron GJS-400-15 (GGG-40) 0.7040Ball and stem Brass CuZn40Pb2 2.0402O-rings NBR

Fig. 1937RBody Ductile cast iron GJS-400-15 (GGG-40) 0.7040Ball and stem Stainless steel X5CrNi18-10 1.4301O-rings NBR

Fig. 1943Body Bronze CuSn5Zn5Pb5-C (G-CuSn5ZnPb (Rg 5)) 2.1096.01Ball and stem Stainless steel X5CrNiMo17-12-2 1.4401O-rings FPM (Viton)

Options• Other sealing materials• Electric or pneumatic actuation• Square cap or extension stem

Ordering informationOrdering code Type Case Trim Pressure rating DN [mm]1942M 2-way Cast iron Brass PN 16 20 - 2001942R 2-way Cast iron SS 304 PN 16 20 - 2001937M 2-way gas cock with approval Ductile cast iron Brass PN 16 20 - 2001937R 2-way gas cock with approval Ductile cast iron SS 304 PN 16 20 - 2001943 2-way Bronze SS 316 PN 16 20 - 200

DimensionsDN d H L M Weight

[mm] [kg]20 20 85 120 130 2.525 25 95 125 170 3.232 32 100 130 170 4.440 40 118 140 220 5.550 50 125 150 220 8.565 63 152 170 284 11.580 76 166 180 284 15.5

100 95 180 190 360 20125 120 225 200 447 30150 145 242 210 560 36200 190 320 400 1000 93

M

DN

H

L

L

d DN

H

M

DN50 - DN200

DN20 - DN40

d

Ball valvesDIN flanges, 3- and 4-wayStainless steel


2008

0301

Ind

ex a

nd p

rod

uct

com

par


PN 163-way120° L-bore

ECON®PN 16 - PN 403- & 4-wayL- , T- and X-boreISO 5211 'Direct Mount'

BACPN 16 - PN 403- & 4-wayL-, T- & X-boreISO 5211 / CAPI


-20°/+150 °C• Full bore• Flange connection under 90°• Transflow type (pigable)• RO-STOP design• DN 50 - 150





ATEX guidance 94/9/EC• 4 seats• Cavity relief hole in ball• DN 15 - 100

• PN 16 - PN 40• Temperature range

-30°/+230 °C• Full bore• ISO5211 / CAPI

Top-flange• Antistatic design

ATEX guidance 94/9/EC• 4 seats• Trim materials acc.

To NACE MR0175• DN 15 - 100



2008

0301

PN 163-way120° L-bore• fig. 7327


-20°/+150 °C• Full bore• Flange connection under 90°• Transflow type (pigable)• RO-STOP design• DN 50 - 150

Econ® three-way ball valves with L-bore, full bore, floating ball and flange connectionrated DIN PN 16. These ball valves feature a bore under an angle of 120° in the balland a flange connection under an angle of 90°. Actuated by means of a lever with a120° stroke. This type of ball valve is generally used in heating, air conditioning andindustrial systems up to a maximum of 16 bar. Because of the unique bore of 120°these ball valves are "pigable" and are characterised by a very low pressure dropcompared with conventional three-way ball valves with a 90° bore. Due to theRO-STOP design, the switching position in the pipe network can be set even after theball valve has been installed.

Construction• Ductile cast iron• L-bore under 120 °C

Pressure and temperature rangeSize Figure Pressure rating Temperature range -20 °C +90 °C +150 °C

DN 50-DN150 7327 PN 16 -20°/+150 °C 16 16 8 [bar]

Material specificationComponent Material EN and/or (DIN) W.nr.Body Ductile cast iron GJS-400-15 (GGG-40) 0.7040Ball Stainless steel X5CrNi18-10 1.4301Stem Stainless steel X5CrNi18-10 1.4301Ball seat 1) PTFEO-rings NBRO-rings FPM (Viton)Lever Steel1) Graphite reinforced

Options• Gearbox, electric or pneumatic actuation• Flanges under 120°• Square cap or extension stem• Locking device


A B

C

A

C

B A

C

B

RO-STOP

B C

POSITION 1 POSITION 2 POSITION 3RO-STOPRO-STOP

A BA BA CB CA C

Ordering informationOrdering code Bore Body Drilling Pressure rating DN [mm]7327 Full bore Ductile cast iron L (120°) PN 16 50 - 150

DimensionsDN d L L1 M H Weight

[mm] [kg]50 50 320 160 260 125 2065 63 350 175 350 152 2680 76 390 195 350 166 35

100 95 430 215 350 180 44125 120 490 245 475 225 70150 145 570 285 475 242 104

MDN

L

L1

d



2008

0301

ECON®PN 16 - PN 403- & 4-wayL- , T- and X-boreISO 5211 'Direct Mount'• fig. 7281L• fig. 7281T• fig. 7291L• fig. 7291T





ATEX guidance 94/9/EC• 4 seats• Cavity relief hole in ball• DN 15 - 100

Econ® three-way ball valve with full bore, L- or T-bore, floating ball and flangeconnection to DIN PN 16 or PN 40. Actuated by means of a lever or T-bar. This type ofball valve has standard four supporting seats and is generally used in industrialsystems such as steam, water, gases, and corrosive media, up to a maximum of 40 bar(PN 40 version).

Construction• DIN PN 16-PN40 in steel 1.0619 or stainless steel 1.4408• L- or T-bore

Features• Design: DIN 3357/1.2, EN 12516-1, Flanges: EN 1092-1• Testing: EN 12266 rate A (100% tight)


rating rangeDN 15-DN100 7281/7291 PN 16 -30°/+230 °C 16 15 13 13 11 7.6 [bar]DN 15-DN50 7281 PN 40 -30°/+230 °C 39 37 34 32 19 7.6 [bar]DN 15-DN50 7291 PN 40 -30°/+230 °C 39 37 33 30 19 7.6 [bar]




All modelsBall seat PTFE (TFM1600)Stem seal PTFEO-ring FKM (Viton)Body gasket PTFELever (DN 15 - 80) 1) Stainless steel X5CrNi18-10 1.4301T-bar (DN 100) 1) Galvanised steel1) Covered with PVC sleeve, color blue

Options• 4-way type with X-bore• Available with EN 10204-3.1 material and test certificate• Gearbox, electric or pneumatic actuation

Ordering informationOrdering code Bore Body Drilling Pressure rating DN [mm]7281L Full bore Steel L PN 16 or PN 40 DN 15 - 1007281T Full bore Steel T PN 16 or PN 40 DN 15 - 1007291L Full bore Stainless steel L PN 16 or PN 40 DN 15 - 1007291T Full bore Stainless steel T PN 16 or PN 40 DN 15 - 100

DimensionsDN d L L1 M H F H1 N1 N2 nxO1 nxO2 E Weight

[mm] [kg]15 15 150 75 145 53 9 83 36 42 4x6 4x6 9 4.520 20 160 80 145 58.5 9 88.5 36 50 4x6 4x7 9 5.925 25 180 90 175 70 11 104 42 50 4x6 4x7 11 8.732 32 190 95 175 77.5 11 111.5 42 70 4x6 4x9 11 1140 38 212 106 200 86.5 14 120.5 50 70 4x7 4x9 14 14.450 49 230 115 200 92 14 126 50 70 4x7 4x9 14 19.265 63 290 145 265 107 17 155 70 102 4x9 4x11 17 31.780 75 310 155 265 119 17 167 70 102 4x9 4x11 17 43.5

100 99 355 177.5 400 150 22 214 -- 102 -- 4x11 22 64.4

M

F

H1H

DN

L

d

DN15-80

M

DN100



2008

0301

BACPN 16 - PN 403- & 4-wayL-, T- & X-boreISO 5211 / CAPI• fig. 7290L• fig. 7290T• fig. 7290X

• PN 16 - PN 40• Temperature range

-30°/+230 °C• Full bore• ISO5211 / CAPI

Top-flange• Antistatic design

ATEX guidance 94/9/EC• 4 seats• Trim materials acc.

To NACE MR0175• DN 15 - 100

BAC® three-way ball valve with full bore, L-, T- or X-bore, floating ball and flangeconnection to DIN PN 16 or PN 40. Actuated by means of a lever or T-bar. This type ofball valve has standard four supporting seats and is generally used in industrialsystems such as steam, water, gases, and corrosive media, up to a maximum of 40 bar(PN 40 version).

Construction• DIN PN 16 or PN 40 • Stainless steel 1.4408• 3- or 4-way • L-, T- or X-bore

Features• Design: DIN 3357 • Flanged ends: EN 1092-1• Testing: EN 12266 rate A (100% tight) • Top-flange: ISO5211 / CAPI ADDS 2.02

Pressure and temperature rangeSize Pressure Temperature -30 +50 +100 +150 +200 +230 [°C]

rating rangeDN 15-DN50 PN 16 -30°/+230 °C 16 15 13 12 11 0 [bar]DN 15-DN100 PN 16 -30°/+230 °C 16 15 13 12 9 0 [bar]DN 15-DN50 PN 40 -30°/+230 °C 39 37 33 30 14 0 [bar]


Body Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Ball (DN 15 - 40) Stainless steel X5CrNiMo17-12-2 1.4401Ball (DN 50 - 100) Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Ball seat PTFE (TFM1600)Stem seal PTFEO-ring Viton (PTFE coating)Body gasket PTFELever Stainless steel X5CrNi18-10 1.4301


Ordering informationOrdering code Bore Body Type Drilling Pressure rating DN [mm]7290L Full bore Stainless steel 3-way L PN 16 or PN 40 DN 15 - 1007290T Full bore Stainless steel 3-way T PN 16 or PN 40 DN 15 - 1007290X Full bore Stainless steel 4-way X PN 16 or PN 40 DN 15 - 100

N E

L1

O

DimensionsDN d L L1 M H F H1 N nxO E Weight

[mm] [kg]15 13 175 87.5 180 32.5 21.5 107 36 4xM5 9 6.620 18 190 95 180 42 27 119 42 4xM5 11 8.925 24 212 106 240 49.8 32 124 50 4XM6 14 11.832 30 220 110 240 57 32 132 50 4XM6 14 16.740 40 260 130 320 89.5 30 161 70 4XM8 17 25.350 50 290 145 320 96.5 30 168 70 4XM8 17 32.865 65 325 162.5 550 120 40 201.5 102 4XM10 22 51.880 80 370 185 550 135 40 216.5 102 4XM10 22 78.6

100 100 450 225 695 177.5 50 288 125 4XM12 27 130.8

M

d

L

HF

DN15-32

DNH1

M

DN40-100

Ball valvesASME flanges, 2-waySteel and stainless steel


2008

0301

Ind

ex a

nd p

rod

uct

com

par


ECON®ASME 150#Full boreISO 5211 'Direct Mount'

ECON®ASME 300#Full boreISO 5211 'Direct Mount'

ASME 150 - 300#Reduced boreISO 5211 / CAPI

• ASME 150#• Temperature range







• Cavity relief hole in ball• A" - 8"









• ASME 150# and 300#• Temperature range




BS 6755 part 2 & API 1607 4thedition

• Trim materials acc.To NACE MR0175

• Cavity relief hole in ball• F/F length

ASME B16.10 short pattern• Brand BAC,

Type PQRi

page 223

BACASME 150 - 300#Full boreISO 5211 / CAPI• ASME 150# and 300#• Temperature range







ASME B16.10 long pattern• Brand BAC,

Type FB(L)



2008

0301

ECON®ASME 150#Full boreISO 5211 'Direct Mount'• fig. 7245• fig. 7285









Econ® two-piece ball valve with full bore, floating ball and flange connection to ASME150# or ASME 300#. Actuated by means of a lever, T-bar or gearbox. This type of ballvalve is generally used in industrial systems such as steam, water, gases, and corrosivemedia up to a maximum of 20 bar.

Construction• Steel A216 WCB or stainless steel A351 CF8M

Features• Design: ASME B16.34, API608 • F/F length: ASME B16.10 long pattern• Flange ends: ASME B16.5 RF (Ra 3.2-6.3) • Testing: API598 (100% tight)

Pressure and temperature rangeSize Figure Temperature -30 +38 +93 +149 +204 +230 [°C]

rangeA"-4" 7245 -30°/+230 °C 20 20 18 16 14 7.6 [bar]

5 "-8" 7245 -30°/+230 °C 20 20 18 16 12 7.6 [bar]A"-4" 7285 -30°/+230 °C 19 19 16 15 13 7.6 [bar]

5 "-8" 7285 -30°/+230 °C 19 19 16 15 12 7.6 [bar]

Material specificationComponent Material US

Steel version, Fig. 7245Body Cast steel ASTM A216-WCBBall Stainless steel ASTM A351-CF8Stem Stainless steel ASTM A276-304

SS version, Fig. 7285Body Stainless steel ASTM A351-CF8MBall Stainless steel ASTM A351-CF8MStem Stainless steel ASTM A276-316

All modelsBall seat PTFE (TFM1600)Stem seal GraphiteO-ring FKM (Viton)Body gasket (spiralwound) Stainless steel AISI 316Lever (DN 15 - 80) 1) Stainless steel AISI 304T-bar (DN 100 - 150) 1) Galvanised steel1) Covered with PVC sleeve, color blueNote: DN 200 is being supplied without operator. A Gearbox is on request available.

Options• Available with EN 10204 3.1 material and test certificate• Gearbox, electric or pneumatic actuation

Ordering informationOrdering code Bore Body Pressure rating DN ["]7245 Full bore Steel ASME 150# A - 87285 Full bore SS 316 ASME 150# A - 8

DimensionsDN d L L1 M F H H1 E N1 N2 O1 O2 Weight Operation

150# 150# 150#["] [mm] [kg]A 15 108 45.5 145 9 48 79 9 36 42 6 6 1.7 leverC 20 117 50 145 9 53 84 9 36 50 6 7 2.2 lever

1 25 127 54 175 11 58.5 95 11 42 50 6 7 2.9 lever1A 38 165 64 194 14 76 111 14 50 70 7 9 5.9 lever2 50 178 78 194 14 81 120 14 50 70 7 9 8.4 lever3 76 203 91.5 265 17 111.5 163 17 70 102 9 11 17.8 lever4 100 229 108 400 22 140 182 22 - 102 - 11 30.5 T-bar6 150 394 162 800 27 202 280 27 - 125 - 14 72 T-bar8 200 457 191 -- 27 252.5 279.5 27 - 125 - 14 131.4 Bare shaft

M

FH1

H

d

L1

4" - 6"with T-bar

L

N2N1

E

4x014x02



2008

0301

ECON®ASME 300#Full boreISO 5211 'Direct Mount'• fig. 7257• fig. 7297









Econ® two-piece ball valve with full bore, floating ball and flange connection to ASME300#. Actuated by means of a lever, T-bar or gearbox. This type of ball valve isgenerally used in industrial systems such as steam, water, gases, and corrosive media,up to a maximum of 51 bar.

Construction• Steel A216 WCB or stainless steel A351 CF8M

Features• Design: ASME B16.34, API608 • F/F length: ASME B16.10 long pattern• Flange ends: ASME B16.5 RF (Ra 3.2-6.3) • Testing: API598 (100% tight)

Pressure and temperature rangeSize Figure Temperature -30 +38 +93 +149 +204 +230 [°C]

ratingA"-2" 7257 -30°/+230 °C 51 51 47 37 19 7.6 [bar]

21 /2"-4" 7257 -30°/+230 °C 51 51 42 28 16 7.6 [bar]A"-2" 7297 -30°/+230 °C 50 50 43 37 19 7.6 [bar]

21 /2"-4" 7297 -30°/+230 °C 50 50 42 28 16 7.6 [bar]5 "-8" 7257/7297 -30°/+230 °C 30 30 25 19 12 7.6 [bar]


Steel version, Fig. 7257Body Cast steel ASTM A216-WCBBall Stainless steel ASTM A351-CF8Stem Stainless steel ASTM A276-304

SS version, Fig. 7297Body Stainless steel ASTM A351-CF8MBall Stainless steel ASTM A351-CF8MStem Stainless steel ASTM A276-316

All modelsBall seat PTFE (TFM1600)Stem seal GraphiteO-ring FKM (Viton)Body gasket (spiralwound) Stainless steel AISI 316Lever (DN 15 - 80) 1) Stainless steel AISI 304T-bar (DN 100 - 150) 1) Galvanised steel1) Covered with PVC sleeve, color blueNote: DN 200 is standard being supplied without operator. A gearbox is on request available.


Ordering informationOrdering code Bore Body Pressure rating DN ["]7257 Full bore Steel ASME 300# A - 87297 Full bore SS 316 ASME 300# A - 8Remark:A"- 4" is with ISO5211 top-flange, but not 'Direct Mount'

DimensionsDN d L L1 M F H H1 E N1 N2 O1 O2 Weight Operation

300# 300# 300#["] [mm] [kg]A 15 140 61.5 135 20 37 86 6.3 - 42 - 6 2.4 leverC 20 152 67.5 135 20 40.5 90 6.3 - 50 - 7 3.2 lever

1 25 165 73 170 24 45.5 96 9 - 50 - 7 4.2 lever1A 38 190 77 200 27 62 114 9.6 - 70 - 9 6.9 lever2 50 216 97 200 27 71 127 9.6 - 70 - 9 9.5 lever3 76 282 132 250 42.5 100 183 16 - 102 - 11 17.7 lever4 100 305 146 400 47.5 120 209 18 - 102 - 11 25.2 T-bar6 150 403 176 800 27 202 280 27 - 125 - 14 73.8 T-bar8 200 502 221 -- 27 252.5 279.5 27 - 125 - 14 171 Bare shaft

H1H

4X01

4X02

E

N2N1

L1 L

M

H

H1

d

N2

E

4x02

4" with T-bar

1/2" - 4"

6"

1/2" - 4" 6" - 8"



2008

0301

ASME 150 - 300#Reduced boreISO 5211 / CAPI• fig. 7321• fig. 7331• fig. 7361• fig. 7371








ASME B16.10 short pattern• Brand BAC,

Type PQRi• A" - 12"

BAC one-piece ball valve with reduced bore, floating ball and flange connection toASME 150# or 300#. Actuated by means of a lever, T-bar or gearbox. This type of ballvalve is generally used in industrial systems such as steam, water, gases, and corrosivemedia, up to a maximum of 51 bar (300# version).

Features• ASME 150# or 300#• Steel A216 WCC or stainless steel A351 CF8M

Features• Design: BS5351, ISO 17292 • F/F length: ASME B16.10 short pattern• Flange ends: ASME B16.5 RF (Sm.Finish) • Testing: EN 12266 rate A (100% tight)

Pressure and temperature rangeSize Figure Pressure rating Temperature range -30 +38 +93 +149 +204 +230 [°C]A"-2" 7345 150# -30°/+230 °C 20 20 18 16 12 0 [bar]

3 "-8" 7345 150# -30°/+230 °C 20 20 18 16 8 0 [bar]10 "-12" 7345 150# -30°/+230 °C 20 20 18 16 5 0 [bar]

A"-2" 7385 150# -30°/+230 °C 19 19 16 15 12 0 [bar]3 "-8" 7385 150# -30°/+230 °C 19 19 16 15 8 0 [bar]

10 "-12" 7385 150# -30°/+230 °C 19 19 16 15 5 0 [bar]A"-2" 7357 300# -30°/+230 °C 51 51 47 34 12 0 [bar]

3 "-8" 7357 300# -30°/+230 °C 51 51 35 26 8 0 [bar]10 "-12" 7357 300# -30°/+230 °C 34 32 23 16 5 0 [bar]

A"-2" 7397 300# -30°/+230 °C 50 50 43 34 12 0 [bar]3 "-8" 7397 300# -30°/+230 °C 50 50 35 26 8 0 [bar]

10 "-12" 7397 300# -30°/+230 °C 34 32 23 16 5 0 [bar]


Steel version Fig. 7321 and 7331Body (A" - 2") Forged steel ASTM A105(N)Body (3" - 12") Cast steel ASTM A216-WCC

SS version Fig. 7361 and 7371Body Stainless steel ASTM A351-CF8M

All modelsBall (A" - 2") and Stem Stainless steel AISI 316Ball (3" - 12") Stainless steel ASTM A351-CF8MBall seat PTFE (TFM1600)Stem seal (Prim./Sec.) PTFE/GraphiteO-ring Viton (PTFE coating)Body gasket (Prim./Sec.) PTFE/GraphiteLever (A" - 3") Stainless steel AISI 304T-bar (4" - 12") Galvanised steel


Ordering informationOrdering code Bore Body Pressure rating DN ["]7321 Reduced bore Steel ASME 150# A - 127331 Reduced bore Steel ASME 300# A - 127361 Reduced bore SS 316 ASME 150# A - 127371 Reduced bore SS 316 ASME 300# A - 12

DimensionsDN d L L1 M H F H1 E N O Weight Operation

150# 300# 150# 300#["] [mm] [kg]A 11 108 139.7 53 160 95 18 18.8 7 36 M5 1.5 2 leverC 14 117.4 152.4 59.6 160 102 18 25.8 7 36 M5 2.5 3.5 lever

1 19 127 165 61.1 180 107 21.5 30.5 9 36 M5 3 4.5 lever11 /2 30 165 190.5 76.3 240 124.5 32 47.5 14 50 M6 6.5 9 lever

2 38 178 216 80 240 130 32 53 14 50 M6 9 11.5 lever3 62 203.2 282.5 88.6 320 173.5 30 95.5 17 70 9 18.5 25.5 T-bar4 76 228.6 304.8 104.6 550 206 40 117 22 102 11 30.5 43.5 T-bar6 100 266.6 403 127 550 224 40 135 22 102 11 46 77 T-bar8 144 292.2 419.1 146 700 307 50 187.5 27 125 13 88.5 133 T-bar

10 187 330.2 457.2 175 700 370 63 229 36 140 17.5 146 208.5 T-bar12 220 355.6 177.8 78 267 46 165 21.5 220 On request

M

H

H1

LL1

DN

LL1

H

H1

DNd

M

DN 3” - 12”

DN 1/2” - 2”

N

E

4 x O

F



2008

0301

BACASME 150 - 300#Full boreISO 5211 / CAPI• fig. 7345• fig. 7357• fig. 7385• fig. 7397








ASME B16.10 long pattern• Brand BAC,

Type FB(L)• A" - 8"

BAC two-piece ball valve with full bore, floating ball and flange connection to ASME150# or 300#. Actuated by means of a lever, T-bar or gearbox. This type of ball valve isgenerally used in industrial systems such as steam, water, gases, and corrosive media,up to a maximum of 51 bar (300# version).

Construction• ASME 150# or 300#• Steel A216 WCC or stainless steel A351 CF8M

Features• Design: BS5351, ISO 17292 • F/F length: ASME B16.10 long pattern• Flange ends: ASME B16.5 RF (Sm.Finish) • Testing: EN 12266 rate A (100% tight)

Pressure and temperature rangeSize Figure Pressure- Temperature -30 +38 +93 +149 +204 +230 [°C]

rating rangeA"-2" 7345 150# -30°/+230 °C 20 20 18 16 12 0 [bar]

3 "-6" 7345 150# -30°/+230 °C 20 20 18 16 8 0 [bar]8" 7345 150# -30°/+230 °C 20 20 18 16 5 0 [bar]A"-2" 7385 150# -30°/+230 °C 19 19 16 15 12 0 [bar]

3 "-6" 7385 150# -30°/+230 °C 19 19 16 15 8 0 [bar]8" 7385 150# -30°/+230 °C 19 19 16 15 5 0 [bar]A"-2" 7357 300# -30°/+230 °C 51 51 47 34 12 0 [bar]

3 "-6" 7357 300# -30°/+230 °C 51 51 35 26 8 0 [bar]8" 7357 300# -30°/+230 °C 34 32 23 16 5 0 [bar]A"-2" 7397 300# -30°/+230 °C 50 50 43 34 12 0 [bar]

3 "-6" 7397 300# -30°/+230 °C 50 50 35 26 8 0 [bar]8" 7397 300# -30°/+230 °C 34 32 23 16 5 0 [bar]


Steel version Fig. 7345 and 7357Body (A" - 2") Forged steel ASTM A105(N)Body (3" - 8") Cast steel ASTM A216-WCC

SS version, Fig. 7385 and 7397Body Stainless steel ASTM A351-CF8M

All modelsBall (A" - 2") Stainless steel AISI 316Ball (3" - 8") Stainless steel ASTM A351-CF8MStem Stainless steel AISI 316Ball seat PTFE (TFM1600)Stem seal (Prim./Sec.) PTFE/GraphiteO-ring Viton (PTFE coating)Body gasket (Prim./Sec.) PTFE/GraphiteLever (A" - 2") Stainless steel AISI 304Lever (3" - 8") Galvanised steel


Ordering informationOrdering code Bore Body Pressure rating DN ["]7345 Full bore Steel ASME 150# A - 87357 Full bore Steel ASME 300# A - 87385 Full bore SS 316 ASME 150# A - 87397 Full bore SS 316 ASME 300# A - 8

DimensionsDN d L L1 M H H1 Weight Operation

150# 300# 150# 300#["] [mm] [kg]A 14 108 140 50 150 90 44 2.8 3.7 leverC 19 117 152.4 53 200 98 52 3.6 5.0 lever

1 24 127 165 60 200 106 58 5.2 7.0 lever1A 38 165 191 60.5 240 124 72 8.3 12 lever2 50 178 216 80 290 150 89 13 14 lever3 76 203 282.5 95 350 182 117 24 30 lever4 100 229 305 104 350 202 135 38 46 T-bar6 151 394 403 175 550 304 195 71 83 T-bar8 202 457 502 200 700 353 237 136 187 T-bar

L1

H

H1

A DN

M

LM

H

H1A DN

LL1

Ball valvesAccessories


2008

0301

Extended bonnets forEcon® Premium3-pce ball valves• fig. 7410• fig. 7411

• Stainless steel• ISO F03 upto F10• Heavy casted design• Double D or square shaft• Easy actuator mounting• Suitable to clear pipe lagging• Applications upto

-50 °C (Fig. 7410)• With glandpacking

(Fig. 7410)• With testconnection

(Fig. 7410)

Econ® extended bonnets fig. 7410 and 7411 can be mounted on the Econ® Premium3-pce ball valves. The extended bonnets are made of stainless steel 1.4408. Bothmodels have PTFE bushings for a smooth and clearance free operation. A guide ringat the bottom ensures a solid connection between extended bonnet and ball valve.Fig. 7410 has a glandpacking and a test connection.Both extended bonnets can be used in combination with an Econ® Premium 3-pceball valve in applications to clear pipe lagging (insulation). Extended bonnets acc. tofig. 7411 are often used for easy mounting of an actuator on an Econ® Premium 3-pceball valve.

Construction• Fig. 7410: with double D stem, glandpacking and test connection

(handlever of ball valve can be used)• Fig. 7411: with square stem

Suitable for• Econ® Premium 3-pce ball valves fig. 7422, 7522 and 7622• Econ® Premium 3-pce ball valves fig. 7442, 7542 and 7642

Material specificationComponent Material EN and/or (DIN) W.nr. US

All modelsBody Stainless steel GX5CrNiMo19-11-2 (G-X6CrNiMo18 10) 1.4408Stem Stainless steel X5CrNiMo17-12-2 1.4401Bushing R-PTFE

Fig. 7410Stem seals PTFE / R-PTFE

OptionsFig. 7410 for applications upto -50 °C(to be ordered together with ball valve)

Ordering informationOrdering code Size Suitable voor Econ® Fig.Numbers7410 1 - 6 7422, 7442, 7522, 7542, 7622 and 76427411 1 - 6 7422, 7442, 7522, 7542, 7622 and 7642

N2

O2

O1

N1

O2

O1

N2

N1

Fig. 7410 Fig. 7411

DimensionsSize DN ball valve H F N1 N2 nx E1 E2 Weight

red full fig. 7410 fig. 7411 O1 O2["] [mm] [kg]

1 A B - ˘ 58 11 12 - 36 - 4x6 5 9 0.32 C A 58 12 13 - 36 - 4x6 6.3 9 0.33 1B C - 1 68 14 13 - 50 - 4x7 8 11 0.64 1A - 2 1B - 1A 88 22 22 50 70 4x7 4x9 9.5 14 1.25 2A 2 88 25 25 50 70 4x7 4x9 11 14 1.26 3 - 4 2A - 3 110 33 32 70 102 4x9 4x11 17 19 2.9

E1

F

H

Fig. 7411

Fig. 7410

E2

F

H

Ball valvesAccessories


2008

0301

Extended bonnets forEcon® Direct Mountball valves• fig. 8007

• Stainless steel• ISO F03 upto F12• Heavy casted design• Square shaft• Easy actuator mounting• Suitable to clear pipe lagging• With glandpacking

Econ® extended bonnets fig. 8007 can be mounted on the Econ® Direct Mount ballvalves. The extended bonnets are made of stainless steel 1.4308. A glandpacking is astandard feature on all sizes. The top-flange dimensions of the extended bonnets areexactly the same as the top-flange dimensions of the ball valve, so in any case ahandlever or actuator can be mounted on top of te extended bonnet.The extended bonnets can be used for example in applications to clear pipe lagging(insulation) or where there is not enough space to mount the handlever or actuatordirectly to the ball valve.

Construction• One model in stainless steel with square shaft

Suitable for• Econ® 2-pce flanged ball valves fig. 7245, 7249, 7285 and 7289• Econ® wafer type ball valves fig. 7343 and 7383• Econ® 3-way flanged ball valves fig. 7281 and 7291• Econ® 3-pce ball valves fig. 7444, 7544 and 7644• Econ® 3-way threaded ball valves fig. 7760• Econ® 2-pce threaded ball valves fig. 7752ISO

Pressure and temperature rangeSame as pressure and temperature range of the ball valves


Body Stainless steel GX5CrNi19-10 (G-X6CrNi18 9) 1.4308Stem Stainless steel X5CrNi18-10 1.4301Thrustwasher PTFEStem seal PTFE

OptionsExtended bonnets for applications upto -50 °C(to be ordered together with ball valve)

Ordering informationOrdering code Size Suitable voor Econ® Fig.Numbers8007 1 - 8 7245, 7249, 7281, 7285, 7289, 7291, 7343, 7383, 7444, 7544, 7644, 7752ISO and 7760

DimensionsSize DN H F N1 N2 nx E Weight

Flange conn. threaded/weld connec. O1 O2["] [mm] [kg]

1 15 - 20 B - A 100 9 36 42 4x6 4x6 9 0.52 20 (ASME) C 100 9 36 50 4x6 4x7 9 0.63 25 - 32 1 100 11 42 50 4x6 4x7 11 0.84 32 (ASME) 1B 100 11 42 70 4x6 4x9 11 0.95 40 - 50 1A - 2 100 14 50 70 4x7 4x9 14 0.96 65 - 80 2A - 3 100 17 70 102 4x9 4x11 17 2.17 100 4 100 22 - 102 - 4x11 22 3.48 125 - 200 - 120 27 - 125 - 4x14 27 4.9

4x02

4x01

H

F

E

E

N1

N2