CDN New Friatec PE Electrofusion Systems - June 6, 2016€¦ · 2" through 4" 128213 1 1,681.36$ 6" through 8" 128214 1 2,037.27$ 6" through 12" 128216 1 3,252.27$ Scraper Tool Accessories

Price List: FPESGWN0704161Effective: July 4, 2016

Supercedes: May 21, 2013

PRICE LIST

www.ipexna.com

PE Electrofusion

Systemsfor Gas,

Municipal,Industrial Waste

and WaterApplications

Vancouver, BC (604) 534-8631

FAX (604) 534-7616

Winnipeg, MB (204) 633-3111

FAX (204) 633-3075

St. John's, NL (709) 747-7473 (PIPE)

FAX (709) 368-9111

Calgary, AB (403) 236-8333

FAX (403) 279-8443

Toronto, ON (905) 670-7676

FAX (905) 670-5295

Edmonton, AB (780) 415-5300

FAX (780) 415-5358

Montreal, QC (514) 337-2624

FAX (514) 337-7886

Saskatoon, SK (306) 933-4664

FAX (306) 934-2020

Saint John, NB (506) 633-7473 (PIPE)

FAX (506) 633-8720

IPEX Inc.Canadian Customer Service Centres

Toll free in Canada: 1-866-IPEXINC (1-866-473-9462)

Accessories 11Alignment Clamps 5Couplings 3, 4, 5Electrofusion Processor & Accessories 2Electrofusion Reducers 9Kravitch Re-Rounding Tools 6Repair Clamps 11Repair Patches 11Re-Round Clamps 5, 6Saddles 11, 12Scraper Tools & Accessories 6Tapping Tees & Accessories 7, 8, 9, 10

Product Listing

Handling charges will be added to all rush orders, and special shipping requests.

Handling charges are at a rate of 30% of freight charge to a maximum of $200.

Any claim of shortage or damages from shipment must be submitted in writingwithin 2 days after receipt of shipment. Buyer shall note loss or damages on truckshipments by providing a delivery receipt signed by the driver.

SPECIFIC TERMS OF SALE

Terms: Net 30 days / F.O.B. Pineville, N.C. USA(Prepay and Add)

Description Dimension Product Standard Unitinches Code Packaging Price

Genesis F3 Electrofusion Processor

Processor / Pen Scanner 328244 1 6,179.25$ Processor / Smart Scan 328243 1 6,410.25$ Processor / Smart Scan + GPS 328242 1 6,641.25$

Accessory bag (x1) 328229Genesis F3 Manual, English (x1) -Genesis F3 Manual, French (x1) -Instructional Video, Genesis F3 (x1) -Fittings Adapter 90 Deg, 4.0mm (x4) 328231Fittings Adapter 90 Deg, 4.7mm with White pin (x1) 328232Fittings Adapter 90 Deg, 4.7mm with Red ID pin (x1) 328233Information Card, Genesis F3 (x1) 3282345/16" Adapter Wrench (x1) 328248

Genesis F3 Replacement Parts

Pen Scanner, Threaded Connector 328224 1 395.45$ SMART Scanner, Genesis F3 328225 1 613.64$ SMART Scanner with GPS, Genesis F3 328226 1 750.00$ Display Shield 328230 1 27.27$ Fittings Adapter, 4.0mm 90º 328231 1 28.98$ Fittings Adapter, 4.7mm 90º with White Pin 328232 1 28.98$ Fittings Adapter, 4.7mm 90º with Red ID Pin 328233 1 45.34$ Smart Scan Holster 328227 1 34.09$ Barcode Pen Holster 328228 1 24.55$ Accessory Bag 328229 1 24.55$ Genesis F3 Information Card 328234 1 9.89$ Fuse, 2 Amp 250 Volt Slow-Blow, 5 x 20mm 328235 1 4.77$ Replacement Case 328247 1 634.09$ 5/16" Adapter Wrench 328248 1 5.25$

Electrofusion Accessories

Marinco Adapter 328000 1 92.22$ Plug 30A. To 15A.

Frialen® Silver Pipe Markers 328002 1 12.90$

Friatrace CD-ROM software w/ cable 328208 1 260.15$

Connection Cable: PC to Friamat® 328173 1

** UPONOR/ New Style Central Connectors 328015 1 92.22$ (Pair) 4.7mm

** Central Connectors 328016 1 92.22$ (Pair) 3.2mm

Reader Wand 328063 1 475.25$ Replacement

Friafit® Adapter 328014 1 150.00$ (Pair)

** Alum. Fusion Processor Carrying Case 328143 1 420.60$

** Plastic Fusion Processor Carrying Case 291158 1 553.50$

** Fusion Lead End (Pair) 328119 1 138.44$

** For Friamat I & II Processors Only

Included Accessories:

* FRIATRACE software and cable allows documentation to be downloaded direct from Friamat I & II to laptop computer.

2


Low Pressure Couplings IPS 80 PSI Maximum (formerly called FRIAFIT)

8" IPS 128139 48/Box 101.44$ 10" IPS 128140 32/Box 121.72$ 12" IPS 128141 24/Box 152.14$ 16" IPS 128142 16/Box 223.15$

NOTE: Friafit® Adapters (2 each) are required to fuse any of these Low Pressure Couplings.(Friafit Adapters; Product Code 328014)

Couplings METRIC sized

20mm 128147 1/Box 9.64$ 32mm 128179 1/Box 14.20$ 50mm 128148 1/Box 24.34$ 63mm 128149 1/Box 60.87$ 75mm 128150 1/Box 44.64$ 90mm 128178 1/Box 48.69$ 110mm 128151 1/Box 54.77$ 140mm 128195 1/Box 111.57$ Note: 5" IPS - 5.563 O.D. Pipe only125mm 128152 1/Box 93.32$ 160mm 128153 1/Box 109.55$ 180mm 128144 1/Box 152.14$ 200mm 128145 1/Box 168.37$ 225mm 128181 1/Box 288.07$ 250mm 128146 1/Box 308.35$ 280mm 128154 1/Box 436.14$ 315mm 128143 1/Box 561.93$ 355mm (Same as 14" IPS) 128182 1/Box 701.90$ 400mm Note: Special training required. 128155 1/Box 872.31$ 450mm Note: Special training required. 128199 1/Box 1,329.55$ 500mm Note: Special training required. 128156 1/Box 1,797.35$ 560mm Note: Special training required. - 1/Box630mm Note: Special training required. 128157 1/Box 2,265.95$ 710mm Note: Special training required. - 1/Box P.O.R.

3


Note: The following electrofusion fittings meet all ASTM F1055 & D2513 requirements for electrofusion fittings.

CTS Couplings (formerly called FRIALEN)

1/2" CTS 128031 80/Box 11.36$ Note: Use Pocket Scraper1" CTS 128027 30/Box 13.19$ Note: Use FWSG 63 Scraper

Couplings IPS

3/4" IPS 128026 60/Box 12.18$ Note: Use FWSG 63 Scraper

1" IPS 128024 30/Box 13.19$ Note: Use FWSG 63 Scraper

1 1/4" IPS 128025 20/Box 15.22$ Note: Use FWSG 63 Scraper or Scraper # 128212

1 1/2" IPS 128033 15/Box 17.25$ Note: Use FWSG 63 Scraper or Scraper # 128212

2" IPS 128028 8/Box 18.06$ Note: Use FWSG 63 Scraper or Scraper # 128212 or # 128213

3" IPS 128029 30/Box 39.56$ Note: Use FWSG 315 Scraper or Scraper # 128213

4" IPS 128030 24/Box 57.83$ Note: Use FWSG 315 Scraper or Scraper # 128213

* 5" IPS 128195 1/Box 111.57$ Note: Use FWSG 315/630/710 Scraper d 140mm fit 5.563 0.D.

6" IPS 128032 8/Box 146.06$ Note: Use FWSG 315/630/710 Scraper


* 8" IPS BIF 128023 36/Box 213.01$ Note: Use FWSG 315/630/710 Scraper




16" IPS 128063 1/Box 852.01$ Note: Special Training Required

18" IPS 128065 1/Box 1,156.31$ Note: Special Training Required




28" IPS 128068 1/Box 4,767.22$ Note: Special Training Required. Will not be shipped without Re-Round tool.

30" IPS (SDR11) 228451 1/Box 6,921.60$ Note: Special training Required. Will not be shipped without Re-Rounding tool.

* Not standard stocking item.

4


Couplings DIP

4" DIP 128183 22/Box 66.95$ Note: Use FWSG 315 Scraper

6" DIP 128134 80/Box 205.92$ Note: Use FWSG 315 & 630/710 Scraper

8" DIP 128131 36/Box 297.19$ Note: Use FWSG 315 Scraper

10" DIP 128136 18/Box 409.79$ Note: Use FWSG 630/710 Scraper

12" DIP 128132 18/Box 754.64$ Note: Use FWSG 630/710 Scraper

14" DIP 128158 12/Box 1,056.40$ Note: Use FWSG 630/710 Scraper

16" DIP 128135 1/Box 1,358.16$ Note: Special Training Required




Alignment Clamps IPS/DIP Single

1 1/4" IPS 228244 1 P.O.R.2" IPS 228137 1 P.O.R.3" IPS 228248 1 P.O.R.4" IPS 228138 1 P.O.R.4" DIP 228263 1 P.O.R.6" IPS 228139 1 P.O.R.6" DIP 228264 1 P.O.R.8" IPS 228246 1 P.O.R.

Alignment Clamps IPS/DIP Double

1 1/4" IPS 228245 1 P.O.R.2" IPS 228140 1 P.O.R.3" IPS 228249 1 P.O.R.4" IPS 228141 1 P.O.R.6" IPS 228142 1 P.O.R.8" IPS 228247 1 P.O.R.

Hydraulic Re-Rounding Clamps IPS

12" IPS Re-Round Insert 228157 1 P.O.R.14" IPS Master Re-Round Clamp 228152 1 P.O.R.16" IPS Re-Round Insert 228158 1 P.O.R.18" IPS Master Re-Round Clamp 228154 1 P.O.R.20" IPS Master Re-Round Clamp 228161 1 P.O.R.d 630mm Large Master Re-Round Clamp, 22" - 24" 228156 1 P.O.R.24" IPS Re-Round Insert 228160 1 P.O.R.22" IPS Re-Round Insert 228159 1 P.O.R.28" IPS Master Re-Round Clamp 228217 1 P.O.R.

5


Hydraulic Re-Rounding Clamps DIP

8" DIP Re-Round Insert 228162 1 P.O.R.10" DIP Master Re-Round Insert 228151 1 P.O.R.12" DIP Master Re-Round Clamp 228153 1 P.O.R.12" DIP Re-Round Insert 228163 1 P.O.R.16" DIP Master Re-Round Clamp 228155 1 P.O.R.16" DIP Re-Round Insert 228164 1 P.O.R.18" DIP Master Re-Round Clamp 228161 1 P.O.R.Note: 20" IPS Master - P.O.R.20" DIP Re-Round Insert 228165 1 P.O.R.Note: Requires 228156 d 630mm Master Re-Round Clamp -

Re-Rounding Tools

10" IPS/DIP - 16" IPS/DIP 228358 1 1,337.67$

18" IPS/DIP - 26" IPS/DIP 228359 1 2,000.15$

28" IPS/DIP - 36" IPS/DIP 228338 1 2,626.00$

Kravitch Re-Rounding Tool

6" IPS / DIP - 12" IPS / DIP Re-Round Tool 228271 1 3,861.16$

12" IPS / DIP - 20" IPS / DIP Re-Round Tool 228278 1 5,804.52$

20" IPS -28 " IPS & 20" DIP - 24" DIP Re-Round Tool 228275 1 7,108.62$

Scraper Tools

FWZ Hand Scraper 328018 Each 28.60$ GBZ Pocket Scraper (1/2" CTS - 1 1/4" CTS) 128020 Each 215.77$ FWSG 63 Scraper Tool (1/2" IPS - 2" IPS) with case 128034 1/Box 1,244.82$ FWSG 315 Scraper Tool (3" IPS - 8" IPS & 4" DIP - 8" DIP ) with ca 128036 1/Box 1,751.99$ Complete Set Scraper Tools 128039 1 Each/Box 2,858.50$ Set Includes: FWSG 63 & FWSG 315 with case -FWSG 710 Scraper Tool (6" IPS - 28" IPS & 6" DIP - 128190 1/Box 2,600.30$ 24" DIP) with case

Scraper Tools

Spare Blade Kit - For all sizes of EFS Scraper tools 228452 1 47.25$ 1 1/4" through 2" 128212 1 1,202.73$ 2" through 4" 128213 1 1,681.36$ 6" through 8" 128214 1 2,037.27$ 6" through 12" 128216 1 3,252.27$

Scraper Tool Accessories

Spare Blades For FWZ Hand Scraper 328017 5/Pack 18.45$ Note: Set of 5Spare Blade Kit (FWSGE 4) For FWSG 63 128041 3/Pack 350.40$ Kit Contains: 3 Blades, 2 Screws & DriverSpare Blade Kit (FWSGE 3) For FWSG 315 128040 3/Pack 350.40$ Kit Contains: 3 Blades, 2 Screws & DriverSpare Blade Kit (FWSGE 5) For FWSG 630/710 128042 3/Pack 350.40$ Kit Contains: 3 Blades, 2 Screws & DriverAlum. Carrying Case For FWSG 630-710 Scraper Tool 128198 1 350.40$ Alum. Carrying Case For FWSG 63-315 Scraper Tool 128035 1 193.61$

6


Main Size x Outlet Size

DAA High Pressure Tapping Tee IPS

1 1/4" IPS x 1/2" CTS with Undersaddle 228020 1/Each 92.32$ Note: Use 228050 Hex Wrench 1 1/4 IPS x 3/4 IPS with Undersaddle 228021 1/Each 88.86$ Note: Use 228050 Hex Wrench1 1/4" IPS x 1" CTS with Undersaddle 228022 1/Each 92.91$ Note: Use 228050 Hex Wrench1 1/4" IPS x 1" IPS with Undersaddle 228023 1/Each 97.88$ Note: Use 228050 Hex Wrench2" IPS x 1/2" CTS with Undersaddle 228042 16/Box 58.83$ Note: Use 228051 Hex Wrench2" IPS x 3/4" IPS with Undersaddle 228029 16/Box 58.83$ Note: Use 228051 Hex Wrench2" IPS x 1" CTS with Undersaddle 228033 16/Box 58.83$ Note: Use 228051 Hex Wrench2" IPS x 1" IPS with Undersaddle 228032 16/Box 58.83$ Note: Use 228051 Hex Wrench2" IPS x 2" IPS with Undersaddle 228274 1/Each 130.71$ Note: Use 228052 Hex Wrench3" IPS x 1/2" CTS with Undersaddle 228043 16/Box 64.92$ Note: Use 228052 Hex Wrench3" IPS x 3/4" IPS with Undersaddle 228030 16/Box 64.92$ Note: Use 228052 Hex Wrench3" IPS x 1" CTS with Undersaddle 228031 16/Box 64.92$ Note: Use 228052 Hex Wrench3" IPS x 1" IPS with Undersaddle 228044 16/Box 64.92$ Note: Use 228052 Hex Wrench3" IPS x 2" IPS with Undersaddle 228028 12/Box 137.94$ Note: Use 228052 Hex Wrench4" IPS x 1/2" CTS with Undersaddle 228045 16/Box 66.95$ Note: Use 228052 Hex Wrench4" IPS x 3/4" IPS with Undersaddle 228034 10/Box 66.95$ Note: Use 228052 Hex Wrench

7



DAA High Pressure Tapping Tee IPS (Cont'd)

4" IPS x 1" CTS with Undersaddle 228035 10/Box 66.95$ Note: Use 228052 Hex Wrench4" IPS x 1" IPS with Undersaddle 228046 10/Box 66.95$ Note: Use 228052 Hex Wrench4" IPS x 2" IPS with Undersaddle 228025 6/Box 148.10$ Note: Use 228052 Hex Wrench6" IPS x 1/2" CTS with Undersaddle 228047 6/Box 81.15$ Note: Use 228052 Hex Wrench6" IPS x 3/4" IPS with Undersaddle 228036 6/Box 81.15$ Note: Use 228052 Hex Wrench6" IPS x 1" CTS with Undersaddle 228038 6/Box 81.15$ Note: Use 228052 Hex Wrench6" IPS x 1" IPS with Undersaddle 228049 6/Box 81.15$ Note: Use 228052 Hex Wrench6" IPS x 2" IPS with Undersaddle 228027 6/Box 174.47$ Note: Use 228052 Hex Wrench8" IPS x 1/2" CTS with Undersaddle 228048 5/Box 202.86$ Note: Use 228052 Hex Wrench8" IPS x 3/4" IPS with Undersaddle 228037 5/Box 202.86$ Note: Use 228052 Hex Wrench8" IPS x 1" CTS with Undersaddle 228041 5/Box 202.86$ Note: Use 228052 Hex Wrench8" IPS x 1" IPS with Undersaddle 228040 5/Box 202.86$ Note: Use 228052 Hex Wrench8" IPS x 2" IPS with Undersaddle 228039 5/Box 202.86$ Note: Use 228052 Hex Wrench

Note: When ordering IPS sizes for gas applications, please advise Customer Service.

Cap Sizes & part numbers are: 32mm (228280); 40 mm (228281), 50 mm (228282)


Electrofusion Tapping Tees

2 IPS x 1/2 CTS 528004 25 32.73$ 2 IPS x 3/4 IPS 528005 25 32.73$ 2 IPS x 1 CTS 528006 25 32.73$ 2 IPS x 1IPS 528007 25 32.73$ 2 IPS x 1 1/4 CTS 528008 15 136.36$ 2 IPS x 1 1/4 IPS 528009 15 136.36$

3 IPS x 1/2 CTS 528011 20 46.36$ 3 IPS x 3/4 IPS 528012 20 46.36$ 3 IPS x 1 CTS 528013 20 46.36$ 3 IPS X 1 IPS 528014 20 46.36$ 3 IPS x 1 1/4 CTS 528015 15 136.36$ 3 IPS x 1 1/4 IPS 528016 15 136.36$

Tapping Tee with plastic under saddle

8


Electrofusion Tapping Tees (cont'd)

4 IPS x 1/2 CTS 528018 20 46.36$ 4 IPS x 3/4 IPS 528019 20 46.36$ 4 IPS x 1 CTS 528020 20 46.36$ 4 IPS x 1 IPS 528021 20 46.36$ 4 IPS x 1 1/4 CTS 528022 15 174.55$ 4 IPS x 1 1/4 IPS 528023 15 174.55$



All Ipex Tap Tees are made from PE 4710

Accessories

Low Volume Pressure Test Cap 528039 1 68.18$ (stem sizes 1/2" to 1")Medium Volume Pressure Test Cap 528040 1 68.18$ (Stem sizes 1 1/4")

2" IPS x 1/2" CTS Training Test Tee 528042 25 19.09$ 2" IPS x 1" CTS Training Test Tee 528043 25 19.09$

Tapping Tool 528038 1 43.64$

Electrofusion Reducers

1 1/4" IPS X 1" CTS Frialen E.F. Reducer 128202 25 P.O.R.1" CTS X 1/2" CTS Frialen E.F. Reducer 128203 40 P.O.R.1" IPS X 1/2" CTS Frialen E.F. Reducer 128204 40 P.O.R.2" IPS X 1" CTS Frialen E.F. Reducer 128205 10 P.O.R.

Tapping Tee without plastic under saddle

Tapping Tee with strap saddle

9


DAA High Pressure Tapping Tee DIP

4" DIP x 1" CTS with Undersaddle 228250 16/Box 93.86$ Note: Use 228052 Hex Wrench

4" DIP x 2" IPS with Undersaddle 228253 10/Box 156.47$ Note: Use 228052 Hex Wrench


8" DIP x 1" CTS with Undersaddle 228260 5/Box 202.86$ Note: Use 228052 Hex Wrench


DAA Top Loading High Pressure Tapping Tee DIP/IPS

10" - 16" IPS/DIP x 2" IPS (12" & Larger DR Restrc.) 228056 5/Box 253.58$ Note: Requires 228053 Friatop Pneumatic Top-Loading Tool Use 228052 Hex Wrench without Undersaddle10" - 16" IPS/DIP x 3/4" IPS 228324 1/Each 550.77$ Note: Requires 228053 Friatop Pneumatic Top-Loading Tool Use 228052 Hex Wrench without Undersaddle

DAA Accessories

10mm Hex Wrench For 1 1/4" Main DAA Tees 228050 1/Each 20.29$ 17mm Hex Wrench For 2" Main DAA Tees 228051 1/Each 24.34$ 19mm Hex Wrench For 3" - 16" Main DAA Tees 228052 1/Each 28.41$ Friatop Pneumatic Top Loading Tool 228053 1/Each 3,144.34$ Note: For 10" - 16" DAA-TL Tee & All TL Fittings

Pressure Test Cap Adapter (Optional) 228024 1/Each 48.69$ Note: For DAA Style 1 1/4" Tees Pressure Test Cap Adapter (Optional) 228055 1/Each 77.10$ Note: For DAA Style 2" - 16" Tees2"IPS x 1/2" CTS Training Tee 228356 16 14.70$ 2" IPS x 3/4" IPS Training Tee 228357 16 14.70$

10


Repair Clamps Undersaddle

3" IPS 228175 24/Box 101.44$ 4" IPS 228176 16/Box 121.72$ 4" DIP 228295 1/Box 154.56$ 6" IPS 228177 10/Box 131.87$ 6" DIP 228307 1/Box 167.48$

Repair Patches Top Loading

8" IPS 228178 10/Box 172.44$

Note: Requires 228053 Friatop Pneumatic Top-Loading Tool

Restriction on 28"

8" DIP 228310 1/Box 287.28$ Note: Requires 228053 Friatop Pneumatic Top-Loading Tool Restriction on 28"

10" - 22" IPS & 8" - 20" DIP 228179 10/Box 271.04$

Note: Requires 228053 Friatop Pneumatic Top-Loading Tool

Restriction on 28"

Accessories

Friatop Pneumatic Top Loading Tool 228053 1 3,144.34$ 12mm PE Repair Plug 228133 1 19.07$ 18mm PE repair Plug 228134 1 17.66$ 24mm PE Repair Plug 228135 1 16.63$ 44mm PE Repair Plug 228136 1 15.42$ VSC Adapter for Friatop Pneumatic Top Loading Tool 228223 1 27.08$



SA Branch Saddles

* 3" IPS x 2" IPS 228184 20/Box 101.44$ * 4" IPS x 2" IPS 228185 12/Box 111.57$ * 4" DIP x 2" IPS 228296 1/Box 141.69$ * 4" IPS x 3" IPS 228186 12/Box 115.64$ * 4" DIP X 3" IPS 228297 1/Box 146.85$ * 6" IPS x 2" IPS 228144 6/Box 142.01$ * 6" DIP X 2" IPS 228305 1/Box 180.35$ * 6" IPS x 3" IPS 228180 2/Box 146.06$

* comes with under * 6" IPS x 4" IPS 228277 1/Box 189.87$ saddle 8" IPS x 2" IPS 228146 5/Box 162.29$

Note: Requires 228053 Friatop Pneumatic Top-loading Tool8" DIP x 2" IPS 228311 1/Box 206.10$ Note: Requires 228053 Friatop Pneumatic Top-loading Tool8" DIP x 3" IPS 228312 1/Box 257.63$ Note: Requires 228053 Friatop Pneumatic Top-loading Tool

* 8" IPS x 4" IPS 228276 1/Box 216.18$ 10" - 22" IPS x 2" IPS & 10" - 20" DIP x 2" IPS 228182 5/Box 223.16$ Note: Requires 228053 Friatop Pneumatic Top-loading Tool10" - 22" IPS x 3" IPS & 10" - 20" DIP x 3" IPS 228187 5/Box 233.28$ Note: Requires 228053 Friatop Pneumatic Top-loading Tool

11


VA Service Saddle with 2" IPS Brass FIP Outlet

* 3" IPS x 2" SSPT 228262 26/Box 140.84$ Note: Undersaddle

* 4" IPS x 2" SSPT 228170 20/Box 85.22$ Note: Undersaddle DIP available please call for pricing

* 4" DIP x 2" SSPT 228298 1/Box 102.26$ * 6" IPS x 2" SSPT 228171 10/Box

Note: Undersaddle DIP available please call for pricing* 6" DIP x 2" SSPT 228302 1/Box 121.74$ * 8" IPS x 2" SSPT 228218 10/Box 113.60$

Note: Requires 228053 Friatop Pneumatic Top-Loading Tool, complete with VSC adaptor* 8" DIP x 2" SSPT 228173 10/Box 117.66$

Note: Requires 228053 Friatop Pneumatic Top-Loading Tool, complete with VSC adaptor* 10" - 22" IPS x 2" SSPT 228174 10/Box 273.86$ * 10" - 20" DIP x 2" SSPT

Note: Requires 228053 Friatop Pneumatic Top-Loading Tool, complete with VSC adaptor Application restriction on 28"

Assemble nipple, bushings or corporation stop into saddle using RED LOC-TITE #262.

Do not over tighten or back out threads once assembled.* SSPT- straight standard pipe thread.The use of tapered fittings is not allowed.

Brass Reducing Bushings - For use with VA Service Saddles Lead Free NSF-61 Annex G

2" x 3/4" MALE SSPT x FEMALE NPT 228453 1 $ 25.73 2" x 1" MALE SSPT x FEMALE NPT 228454 1 $ 26.25 2" x 1 1/2" MALE SSPT x FEMALE NPT 228455 1 $ 22.05

Assemble Bushings into VA Saddle using RED LOC-TITE #262

Do not overtighten or back out threads once assembled.

SPA Balloon Saddles

3" IPS Spa Balloon Saddles 228236 - POR

4" IPS Spa Balloon Saddles 228237 - POR

6" IPS Spa Balloon Saddles 228238 - POR8" IPS Spa Balloon Saddles 228335 - POR10" - 12" IPS Spa Balloon Saddles 228241 - PORNote: Requires 228053 Friatop Pneumatic Top-Loading Tool

Accessories For SPA Balloon Saddles

Electrofusion cap for SPA Saddles - Yellow 228242 - PORElectrofusion cap for SPA Saddles - Black 228339 - POR

12

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

NOTES

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

…………………………………………………………………………………………………………………………..

IPEX Inc. General Terms & Conditions of Sale

March 2010

IPEX Inc.

www.ipexna.com

(“Vendor”)

Terms and Conditions of Sale

1. Scope All sales are subject to these general terms and conditions (“General T&C’s”). In addition, certain products may be subject to product-specific terms and conditions (“Specific T&C’s”) as posted on the Vendor’s website at the time of sale. Purchaser’s order is accepted subject to these General T&C’s, to the applicable Specific T&C’s and to any terms and conditions agreed to in writing by the Vendor and Purchaser. It is expressly agreed that any terms and conditions contained in the Purchaser’s order or otherwise stipulated will be deemed for the Purchaser’s internal use only and will not be binding on the Vendor.

2. Orders Purchaser’s orders are conditional upon satisfactory credit approval by the Vendor. The Vendor will only accept orders in excess of $100 before taxes or such greater amount as may be specified for certain products. Once confirmed by the Vendor, orders for custom-made products manufactured to the Purchaser’s specifications and orders for large quantities of non-inventoried products cannot be cancelled, modified or returned, except with the Vendor’s written consent and upon terms which provide for indemnification of the Vendor for the costs and expenses incurred.

3. Shipments Delivery schedules stipulated in either the quotation (“Quotation”) or the order confirmation (“Order Confirmation”) are approximate only and shipment will be made within reasonable proximity thereto. Under no circumstances will the Vendor be responsible for any damage whatsoever caused by delays in shipment, whether resulting from causes within or beyond the control of the Vendor. All shipments are F.O.B. the Vendor’s location per the American standard sales terminology or Ex Works per the Incoterms international rules applied to foreign trade contracts. The Vendor shall bear no liability for Products lost or damaged during transit. The Vendor may agree to different shipment terms as specified in the Quotation or in the Order Confirmation. Freight prepaid orders, when applicable, will be delivered by the carrier of the Vendor’s selection, unless the use of other carriers is agreed to in writing with the Purchaser. Purchaser must verify quantities and report discrepancies within 2 business days of receipt.

4. Prices All prices quoted or published are F.O.B. the Vendor’s location or Ex Works. Published prices are subject to change without notice until orders are accepted by the issuance of an Order Confirmation, whereupon prices will remain firm for those shipments that take place within the 30-day period following the date of the Order Confirmation. For specific projects, contracts or Quotations, the Vendor may agree in writing to protect prices for an extended period of time. Each order may be shipped in whole or in part at the Vendor’s discretion. Each shipment made will be immediately invoiced. Quoted or published prices do not include any sales, use, excise or any other tax or levy imposed by any present or future law, regulation or other order, on any of the Products. The Purchaser must provide the Vendor with tax exemption certificates or other documents, as required by the specific tax jurisdiction, in order not to be charged for any of the applicable taxes.


March 2010

5. Terms of Payment Unless other terms of payment are agreed to in writing by the Vendor, payment is due upon delivery of the Products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if the Vendor receives payment from Purchaser on or prior to the due date. Net 30 days means that payment is due within 30 days of the date of invoice and no cash discount is applicable. Overdue accounts shall bear interest at a rate of 18% per annum. The granting of credit by the Vendor is at all times based on its evaluation of the Purchaser’s financial condition. If such financial condition does not justify continuance of shipment on credit, the Vendor may require full or partial payment in advance.

6. Title to the Goods Sold The Purchaser acknowledges and agrees that so long as the Products are in Vendor’s possession, title to the Products shall remain with the Vendor until full payment therefore is received by the Vendor. The Purchaser agrees to defend, indemnify and save the Vendor harmless from any and all costs, expenses and damages arising out of any claims asserted against the Vendor pursuant to the exercise of its ownership rights or any recourse in payment of purchase price.

7. Return of Products The Vendor may accept the return of Products, subject to the following: a) prior to returning any Products, the Purchaser must obtain a Return Material Authorization (RMA) number from the Vendor, b) Products must be returned freight prepaid, unless otherwise authorized by the Vendor and c) Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. A minimum return charge of 25% of the purchase price will be applied against any credit issued pursuant to the return of Products, except in the case of a Vendor shipping error. The Vendor may apply additional charges against the credit to cover remarketing costs or may refuse to issue any credit, but will advise the Purchaser accordingly. Certain Products, such as pressure pipe, custom-made configurations, obsolete products, excessive quantities or other specialty products cannot be returned. The Vendor may direct that Products be destroyed for credit rather than returned.

8. Changes to Products The Vendor reserves the right to make changes or improvements to its Products without assuming any further obligation.

9. Patent Rights If any claim is made against the Purchaser based on the allegation that any of the Products sold by the Vendor constitute an infringement of any U.S. or Canadian patent, the Purchaser shall notify the Vendor immediately. The Vendor shall have the right, at its own option and expenses, to take any actions to protect and defend its rights.

10. Force Majeure The Vendor shall in no event be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind or nature whatsoever, direct or indirect, suffered by the Purchaser, subsequent purchasers, ultimate users of the goods or any other person, as a result of any causes beyond the reasonable control of the Vendor including, without limitation, price alterations, delay in shipments, strikes, lock-outs, fires, floods, civil commotion, riots, wars, acts of God, embargos, labor shortages, walk-outs, work slowdowns, accidents, breakdowns, delays in manufacture, transportation or delivery of goods or materials, shortages of


March 2010

materials or supplies, government acts or regulations or licensing action.

11. Governing Law This agreement and all rights and obligations hereunder shall be governed by the laws of the province of Ontario and all actions commenced pursuant hereto shall be brought in a court of competent jurisdiction residing in the province of Ontario.

12. Non-waiver No delay, failure, change or waiver by the Vendor to exercise any one or more of these terms and conditions of sale shall be construed or shall operate to be a waiver thereof or a continuing waiver of such terms and conditions.

13. Warranty and Limitation of Liability

13.1. All of the Vendor’s Products are guaranteed against defects resulting from faulty workmanship or materials, subject to the limitations, exceptions, disclaimers and conditions stipulated hereunder or specified with respect to particular products and posted, updated or amended on the Vendor’s website or stipulated in the product literature,

13.2. The Vendor will replace, free of charge, including shipping charges for the replacement Products, any Products which are found to be defective in workmanship or material, provided that the following conditions are met:

13.2.1. the Vendor is promptly notified in writing of such defect immediately upon discovery of same and the defective Product is promptly returned to the Vendor. Claimant must provide documentary evidence of failure, as well as the failed components or representative samples of Product(s) that are alleged to have failed and agree to inspection by the Vendor of the system in which the alleged defective Product(s) was/(were) installed.

13.2.2. the Products have not been altered or modified after leaving the Vendor’s premises, have not been used in more than one installation, show no evidence of disassembly or tampering, are not and have not been subjected to abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is not due, without limitation, to faulty installation, misalignment of Products, vibration, ordinary wear and tear, corrosion, erosion, U.V. degradation, incompatible lubricants, pastes and thread sealants, unusual pressure surges or pulsation, water hammer, temperature shocking or fouling, acts of nature such as earthquakes, fire, flood or lightning or any other event of force majeure.

13.2.3. if the Product is perishable, the Product has been used or installed prior to the expiry date printed on the Product;

13.2.4. the Products have been used in applications or under conditions that are in accordance with the technical information or literature available from the Vendor.

13.3. Limited warranty periods may apply to certain products. Where applicable, these are posted on the Vendor’s website.

13.4. The Vendor disclaims any liability or responsibility:


March 2010

13.4.1. for labor, materials and/or other expenses required to replace the defective Product or to repair any damage resulting from the use thereof;

13.4.2. for the Purchaser’s calculations, product drawings or engineering design specifications;

13.4.3. regarding the accuracy of any plans, drawings or specifications furnished to the purchaser as part of the sale of any of its products;

13.4.4. for loss or damage resulting from failure to abide by manufacturer’s warnings, safety instructions or other precautionary guidelines.

13.5. ANY CLAIM OF LIABILITY ASSERTED AGAINST THE VENDOR WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE, DELIVERY, INSTALLATION, REPAIR OR USE OF ANY PRODUCTS SOLD TO BUYER SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCTS FOUND TO BE DEFECTIVE. It is the responsibility of the owner to obtain and pay for emergency repairs.

13.6. THE VENDOR’S LIABILITY IN RESPECT TO THE SALE IS STRICTLY LIMITED TO THE REPLACEMENT OF PRODUCTS AS HEREINBEFORE SPECIFIED AND THE VENDOR SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY DAMAGES WHETHER FOR THE LOSS OF USE OR BUSINESS INTERRUPTION OR ANY OTHER CLAIM FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES. THERE IS NO WARRANTY, CONDITION OR REPRESENTATION OF ANY NATURE WHATSOEVER, EXPRESSED OR IMPLIED, BY STATUTE OR OTHERWISE, EXCEPT AS HEREIN CONTAINED AND THE VENDOR DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS OF ITS PRODUCTS FOR A SPECIAL PURPOSE OR OTHER WARRANTY OF QUALITY.

* * *

Vancouver, BC20460 Duncan Way,Langley, British Columbia V3A 7A3 (604) 534-8631 FAX (604) 534-7616

Calgary, AB8460 - 60th Street S.E.Calgary, Alberta T2C 3C7 (403) 236-8333 FAX (403) 279-8443

Edmonton, AB4225 - 92nd AvenueEdmonton, Alberta T6B 3M7 (780) 415-5300 FAX (780) 415-5358

Saskatoon, SK611 - 47th Street EastSaskatoon, Saskatchewan S7K 5G5 (306) 933-4664 FAX (306) 934-2020

Winnipeg, MB2081 Logan Avenue WestWinnipeg, Manitoba R2R OJ1 (204) 633-3111 FAX (204) 633-3075

Toronto, ON6810 Invader CrescentMississauga, Ontario L5T 2B6 (905) 670-7676 FAX (905) 670-5295

Montreal, QC6665 chemin Saint-FrançoisSaint-Laurent, Québec H4S 1B6 (514) 337-2624 FAX (514) 337-7886

Saint John, NBP.O. Box 127, Grandview Industrial ParkSaint John, New Brunswick E2L 3X8 (506) 633-7473 (PIPE) FAX (506) 633-8720

St. John's, NLP.O. Box 13247, Station ASt. John's, Newfoundland A1B 4A5 (709) 747-7473 (PIPE) FAX (709) 368-9111

Toll free in Canada: 1-866-IPEXINC (1-866-473-9462)

www.ipexna.com

IPEX Inc. Canadian Customer Service Centres

Documents

CDN New Friatec PE Electrofusion Systems - June 6, 2016€¦ · 2" through 4" 128213 1 1,681.36$ 6" through 8" 128214 1 2,037.27$ 6" through 12" 128216 1 3,252.27$ Scraper Tool Accessories