CATIA V5.20: Virtual design for product excellence

IBM Europe, Middle East, and Africa Software AnnouncementZP10-0025, dated February 16, 2010

IBM Europe, Middle East, and AfricaSoftware Announcement ZP10-0025

IBM is a registered trademark of International Business Machines Corporation 1

CATIA V5.20: Virtual design for product excellenceTable of contents

1 Overview 40 Technical information 3 Key prerequisites 49 Ordering information 3 Planned availability date 73 Terms and conditions 3 Description 76 Prices 7 Product positioning 77 Announcement countries 10 Program number

At a glance

The new products and enhancements in CATIA V5.20 deliver the followingcapabilities:

• Support customers with production and quality improvements in all domains andindustries

• Natively integrate ICEM shape design products to fully address Automotive Class Arequirements

• Support operating system platform upgrades

• Ensure compliance with US FAA (Federal Aviation Administration) certificationpolicies

Overview

With CATIA V5.20, you can:

Fully address Automotive Class A with ICEM shape design: Sustaining theCATIA V5 principle of seamless data flow using one common data format throughoutthe portfolio across all phases of the design cycle, ICEM Shape Design (ISD)R20 extends its advanced and powerful free-form surface creation, modification,and analysis capabilities within the Class A modeling domain. ISD R20 protectsinvestment in previous releases and supports seamless migration by furtheradopting and supporting CATIA V5's trusted methodology and proven updatemechanisms.

Accelerate, unify, and streamline conceptual design and surfacing: Thenew, powerful subdivision net surfaces function in Imagine & Shape 2 (IMA) letsdesigners combine the curve-based approach with subdivision surface clay modeling.This function helps to increase design quality and empowers the creative designerwith greater capabilities. Imagine & Shape 2 is particularly beneficial to stylingcenters and design studios in the transportation, shipbuilding, product design, andlife sciences industries.

Increase productivity, collaborate more effectively, and ensure qualitywith several features that dramatically enhance composites solutions:Productivity is greatly increased with Light Manufacturing Part Generation, whichensures that manufactured parts can be quickly created and synchronized withdesigned parts. Powerful collaborative design features allow users to merge stacksfrom several parts in a destination part, as well as to synchronize a merged stackwith the destination part, notably enhancing collaboration. In addition, severalknow-how features for automatic placement processes are introduced such asstagger origin and material addition, ensuring product manufacturability and quality.



This solution is especially beneficial to the aerospace, automotive, wind energy, andshipbuilding industries.

Improve design productivity and ensure high-quality design withenhancements to mechanical part design products and tools: Functionalmodeling is enhanced to address the design practices of customers in the powertraindomain and to support complex part design for all domains. Using functionalmodeling technology, users can design such components as oil pans, gear boxes,and motor brackets up to 40 percent faster than with standard CATIA V5 Part Designmethods.

Enhancements have also been added to ensure fillet robustness, furtherincreasing productivity and reducing design modification costs. In addition, wallthickness analysis tool enhancements allow users to assure design quality andmanufacturability as well as increase productivity. All of these enhancements areparticularly beneficial to the powertrain domain of the automotive industry, but arealso useful across all industries.

Visualize complex multi-plane internal section views: This function allowsusers to cut a part along multiple planes. Subsequently, they can instantly visualizeseveral internal features, such as holes and slots, in a single view to betterunderstand the geometry and all of its annotations. This instant display of complexviews requires no computation and therefore helps improve user productivity. It isvaluable across all industries.

Improve ergonomics and user productivity with flex simulation, harnessinstallation, and harness flattening enhancements: Harness analysis, togetherwith filtering and sorting capabilities in the device list, is improved to enhanceergonomics. In addition, knowledge parameters for bundle segments in harnessflattening can be synchronized. These enhancements, among others, are particularlybeneficial to the aeronautical and automotive industries.

Reduce programming and machining time: Two new functions--materialremoval simulation and advanced finishing--reduce programming and machiningtime, respectively, so companies can save time and money. The material removalsimulation function reduces programming time by helping users to betterunderstand the in-process model (IPM) with the use of color coding. The advancedfinishing function reduces machining time by providing an optimized finishing routein only one operation while taking a dedicated strategy into account for the verticaland horizontal areas. These capabilities enhance the machining process across allindustries.

Implement a new STEP product for advanced functions: The CATIA - ExtendedSTEP Interface enables long-term archiving with full validation properties and nestedassemblies. It also makes it possible to manage very large assembly structures thruSTEP thanks to nested assembly support. This function is especially beneficial to theaeronautical and automotive industries.

Comply with US Federal Aviation Administration (FAA) certification policies:The 3D Insight product was developed to comply with FAA certification policies,which require that there be only one model and one modifier, a primary engineer,during the entire development, deployment, manufacturing, and management lifecycle. This feature applies to the aeronautical industry.

Deliver new rule-based meshing for creating high-quality meshes: The newSIMULIA - Rule Based Meshing product automates the process of creating high-quality surface meshes for all work flows that use CATIA meshing tools. Users canspecify globally the desired meshing treatment of entities such as holes, fillets, andbeads. It also gives them a means to specify acceptable element quality criteria,such as minimum edge length, aspect ratio, and skew. Once the complete set ofmeshing rules is specified, no additional user involvement is necessary because theactual mesh generation is completely automated.



Key prerequisites

CATIA V5 runs on selected versions of:

• Microsoft® Windows®

• IBM® AIX®

• Sun Solaris

Planned availability date

February 19, 2010

Description

CATIA Shape

ICEM Shape introduction in the CATIA V5 portfolio

Sustaining its principles of seamless data flow using one common data formatthroughout the CATIA V5 portfolio across all phases of the design cycle, ICEMShape Design (ISD) R20 extends its advanced and powerful free-form surfacecreation, modification, and analysis capabilities within the Class A modeling domain.Protecting your investment in previous releases and supporting seamless migration,ISD R20 further adopts and supports CATIA V5's trusted methodology and provenupdate mechanisms.

Creation of subdivision instances

This new command offers you the ability to create one or more instances of anyexisting subdivision feature. The instance can be a subdivision surface or any kindof subdivision feature, such as symmetry, revolution, and extrusion. After creatingthe instance, you can move it freely and easily rotate it. Numerous products containmany repetitive pieces, such as pearls in a necklace or the four wheel rims on acar. Imagine & Shape now addresses the creation of these types of repetitive pieceswith an easy-to-use solution that is fully integrated with the Imagine & Shapeworkbench.

Alignment of points along any geometry

The Alignment command aligns vertices on a plane or a line defined by the compass.Enhancements to the command extend the possible supports of projection byproviding a way to project some points of the base mesh onto any kind of geometry.This gives you the freedom to use styled geometry as input to the design process.

Automatic surface associativity

The Quick Surface Reconstruction 2 workbench provides a fully automatic commandfor quickly building surfaces fitted on meshes. The Automatic Surface Reconstructioncommand is now associative. This enables interactive editing and automatic updateof the surface in case of input mesh modification or replacement, increasingproductivity.

Mesh selection and propagation for surface creation

This new function makes it easier to select meshes. You can now quickly selectplane areas on meshes. Additionally, within the Activate command, flooding can beachieved with an angle criterion, and in the PowerFit command, you can activate asub-part of a mesh to avoid counter-draft treatment during the approximation.



Shape creation enhancements in the FreeStyle Shaper

It is now possible to control the styling fillet with greater precision.

• The dialog box is redesigned.

• The Furtive Display command is enhanced (only the ribbon is taken into account).

• A new support for fictive edges is introduced (no real intersection betweensupports is needed).

• Multi-result management (as in Generative Shape Design) is added.

Shape modification enhancements

Shape modification offers many enhancements to the control points function, theExtend command, and the styling Extrapolate command. The break creation processis also made easier, with more possibilities for the creation of the datum featurethat will save time. Evolution of the Matching Constraint command adds functions toimprove productivity.

Isolation of Generative Shape Design (GSD) features

You can now isolate any GSD feature. Isolating a feature breaks any links with itsinputs so that the feature becomes a datum feature that cannot be updated. Thisproductivity enhancement eliminates the need to copy the geometry of the featureand then replace the feature with the copy.

Fillet - Blend Corner robustness

It is now possible to define a blend corner with a setback that exceeds the initialedge.

Dynamic sectioning in Part Design and Generative Shape Design

This new command lets you cut a part at a position chosen dynamically by movinga 3D section directly in the 3D viewer. This function can be useful during the designprocess itself, to visualize the part being designed by section, or at review time, todetect potential section issues.

CATIA Mechanical

Section and thread management

Even though thread definition does not generate geometry, the CATIA wall thicknessanalysis function can optionally take into account existing thread and tap featuresin order to measure real material thickness. Moreover, because you can sectiongeometry, you can store sections dynamically in the Wall Thickness Analysiscommand in order to save critical zones and to get quick access to them. Sectionscan be used for review during design, thanks to their status, comment, andthickness values.

2D Layout for 3D Design - Multi-plane section views

Offset and aligned section views or section cuts can be created in layouts, ratherthan in drawings only. Such multi-plane views can be created either from afunctional tolerancing and analysis (FTA) view or capture or from a polyline locatedin an existing layout view. In offset section views, parts are cut by several parallelstaggered planes, to display a hole silhouette in a cylinder head for instance. Inaligned section views, the part is cut by secant planes and is drawn as if this cuttingsurface was unfolded.

The 3D model is displayed according to the cutting profile, using 2D layout viewfilters to insure proper display of both 3D geometry and annotations. Boundaryobjects can be created and edited to obtain the relevant display of cutting profilecorners in the multi-plane view. These multi-plane views can be generated todrawings.



Automatic tolerancing of user features

This new function enables the administrator to

• Upgrade referenced user features

• Create tolerancing schema features

• Create a catalog of tolerancing schemas

• Create user default tolerancing schema catalog definitions

You benefit from automatic creation of tolerances for user features as well as

• User feature selection propagation

• Group of user feature tolerance creation

• User feature tolerancing schema query and filtering

Global copy of FTA data

FTA data can now be copied globally from one CATPart to another. This capabilitylets you duplicate an existing annotation set feature from a CATPart to anotherCATPart document. It includes automatic rerouting to geometric elements that havethe exact same geometric characteristics.

Clipping plane enhancement

Support is added for offset/aligned section view/cut. If the active view is acomponent of an Aligned/Offset Section Cut/View feature, the corresponding 3DAligned/Offset clipping is displayed.

Wall-on-edge propagation

To define a wall-on-edge feature, you can select several edges that will generateseveral folds. Folds and their tips are automatically re-limited according to aminimum gap value between them.

User stamp on both sides

In addition to improving the user interface, this option allows you to create stampsin two opposite directions in a single operation.

Chamfer recognition

The feature recognition function now recognizes chamfers.

Intersection fillets for functional modeling

This release improves intersection fillet stability by computing it at the minimalintersection level. More modifications on previous features can occur with no failureon intersection fillet definition and computation.

Local Work for functional modeling

This command, similar to the Define in Work command, lets you work locally in asimplified context, such as a sub-part of a part, by selecting a functional set or a listof features. It reduces the impact of part complexity.

SDNF Import/Export command

This enhancement supplies the capability to export structure information into aneutral file format called a steel detailing neutral file (SDNF). SDNF is designed tobe expandable to meet future needs and capabilities. All information in the file isin ASCII format and is structured into packets of information. It also provides the



capability to import a valid SDNF file with structure information and to use it tocreate structures under a specified product.

Advanced bill of material

Support for user-defined product attributes is added. This enhancement enablesyou to extract from the bill of material not only the predefined CATIA attributes ofproducts, but also the attributes added by users through the Other Propertiesfunction.

Section and auxiliary view callouts

Within a 3D master process, this function allows you to natively get a normalizedrepresentation of callouts in layouts, rather than in drawings only. Calloutrepresentations corresponding to auxiliary views, section views, section cuts andmulti-plane section views can be added to existing design views. This can be donewhile creating such views or afterwards, using the same styles and properties as thedrafting callouts that are created in drawings when generating the correspondinglayout view.

Dynamic sectioning in Part Design

This new command lets you cut a part at a position chosen dynamically by movinga 3D section directly in the 3D viewer. This function can be useful during the designprocess itself, to visualize the part being designed by section, or at review time, todetect potential section issues.

Intersection edge fillet for Part Design

This release offers an additional Intersection Against Selected Features definitionmode. When you want to create a fillet between features, you can define two lists offeatures by selection. The fillet will run on the intersection edges that run betweenthese two lists.

Joggle enhancement request

This option allows you to locate the extremity of the joggle with respect to its joggleplane. Either the end radius extremity or the run-out extremity can be locatedexactly on the joggle plane.

Compare and review

This release introduces a compare and review function that can be used to supporta review and approval process for design geometric changes. It speeds the approvalprocess for a new revision of a part geometry and makes it easier to understand theimpact of part modifications to downstream processes such as tooling, machining,analysis, and inspection.

CATIA Equipment

Enhancement for bend radius ratio use

The branchable has two new attributes: the Creation Mode attribute and BendRadius Ratio attribute. These two attributes complement each other and provideimproved information about the branch, especially when the branch is created usingthe Bend Radius Ratio button. These new attributes:

• Enable every branch to retain the information about the bend radius ratio valueset for its curve

• While performing wire routings, can be used and respected to re-compute thebranch diameter and bend radius appropriately

• While editing multiple branchables using the Branch Definition command, can beused to invoke the bend radius ratio value of the branchable



Filter device list

There are now several ways to filter and sort the device list to show the harnessdefined for each device.

CATIA Machining

Advanced finishing

A whole part can now be machined with a dedicated tool path style for both verticaland horizontal areas. This enhancement is useful for finishing or for finishing rework(removal of material left by a larger cutter).

Machine simulation

Stock can now be displayed based on tool color during integrated material removaland machine simulation.

CATIA Infrastructure

This release introduces the CATIA - Extended STEP Interface 2 (SXT) product foradvanced STEP functions.

Accessibility by people with disabilities

Owing to the graphics-intensive nature of its engineering design applications, thisproduct has been granted a deviation.

Product positioning

CATIA V5 is the leading solution for product excellence. It addresses allmanufacturing organizations, from OEMs, through their supply chains, to smallindependent producers. The range of CATIA V5 capabilities allows application in awide variety of industries, such as aerospace, automotive, industrial machinery,electrical, electronics, shipbuilding, plant design, and consumer goods, includingdesign for such diverse products as jewelry and clothing.

CATIA V5 is the only solution capable of addressing the complete productdevelopment process, from product concept specification through product-in-service, in a fully integrated and associative manner. Based on an open, scalablearchitecture, it facilitates true collaborative engineering across the multidisciplinaryextended enterprise, including style and form design, mechanical design andequipment and systems engineering, managing digital mock-ups, machining,analysis, and simulation. By enabling enterprises to reuse product design knowledgeand accelerate development cycles, CATIA V5 helps companies speed-up theirresponses to market needs.

In conjunction with ENOVIA VPLM and ENOVIA SmarTeam for life-cycle managementand decision support and DELMIA for manufacturing engineering, CATIA V5 is a keycomponent of collaborative product lifecycle management (PLM).

Much beyond pure CAD software packages, which provide geometry modelingfeatures for design-centric companies, CATIA V5 delivers the keys to PLM forprocess-centric companies:

• Product to market. CATIA is about product excellence. From the earliest productconcept to production tooling, its concurrent engineering and design-in-contextcapabilities create value by enabling companies to create products and bring themto the market.

• Time to market. The unequalled process coverage of CATIA, combined withthe native associativity among all of its applications, gives CATIA customers themeans to shorten the time to market.



• Right to market. CATIA's integrated analysis, simulation, synthesis, andoptimization applications provide product engineering validation at each designstep to ensure product quality and market acceptance.

• Lead the market. CATIA's advanced capabilities for collaborative engineering,knowledge capture, and re-use boost innovation and help customers to lead themarket.

The three CATIA V5 platforms (P1, P2, and P3) make CATIA the most scalablesolution for product creation. CATIA V5 P1 users benefit from PLM productivity in anaffordable way with the security of potential growth. They can conduct associativeproduct engineering based on CATIA V5 product design-in-context, productknowledge reuse, end-to-end associativity, product validation, and collaborativechange management capabilities.

CATIA V5 P2 users can optimize their PLM processes through knowledge integration,process accelerators, and customized tools. They can drive generative productengineering based on the largest application portfolio. They can perform "design-to-target," extensively capture and re-use knowledge, and stimulate collaborativeinnovation.

CATIA V5 P3 users access the highest productivity for specific advanced processeswith focused solutions. They can lead expert engineering and advanced innovation,relying on unique and very specialized applications that integrate product andprocess expertise.

The CATIA V5 world is fully scalable because the P1, P2, and P3 platforms operateon the same data model, methodology, and management schemes. By enablingusers to install P2 applications on top of P1 seats and by standardizing graphicaluser interfaces across platforms, P1 users can immediately do collaborative designwithin their extended enterprise with P2 users and later grow with P2 and P3platforms as their business grows.

Product positioning - Globalization

CATIA V5 program integrated information (PII) and CATIA V5 softcopy productinformation are available in:

• French

• German

• Italian

• Japanese

PII is stored in compressed unicode format (UTF-8) for world-wide exchange withoutthe loss or misinterpretation of characters.

Hardware and software support services

SmoothStart/installation services

IBM SmoothStart/Installation Services are not available for CATIA products.

CATIA V5 services plan

PLM Services, part of IBM Global Services, offers a robust portfolio of services toassist with the implementation of CATIA V5. Careful planning and implementationare essential to getting the most from CATIA V5. IBM PLM Services provides anImplementation for CATIA V5 Services Offering specifically designed to move anenterprise smoothly and successfully from CATIA V4 or other CAD systems to CATIAV5 via a flexible path that can be customized to the enterprise's needs. We can helpwith assessment, solution design, planning, installation, data migration, customapplication development, best practices consulting, user and administrative training,support, and project management.



For additional information on service offerings and how IBM professionals canassist with the implementation of CATIA V5 in your environment, contact your IBMrepresentative or IBM Services organization or visit

http://www.ibm.com/software/plm/services

Select Find out more about IBM PLM services listed under Further informationon the right.

Enhanced Support Offering

Direct customer support is available under the Product Lifecycle ManagementSupport Services - Enhanced Support Offering (ESO). Refer to this topic in theTerms and conditions section for additional information.

Reference information

For information about DELMIA V5.20, refer to Software Announcement ZP10-0026,dated February 16, 2010.

For information about ENOVIA VPLM V5.20, refer to Software AnnouncementZP10-0027, dated February 16, 2010.

For information about ENOVIA SmarTeam V5.20, refer to Software AnnouncementZP10-0014, dated February 16, 2010.

For information about CAA RADE V5.20, refer to Software Announcement ZP10-0017, dated February 16, 2010.

Availability of national languages

CATIA V5 is available in:

• French

• German

• Italian

• Japanese

Product integrated information (PII) is included on the code CDs for each operatingsystem at general availability.

National language version (NLV) publications in French, German, Italian, andJapanese will be available after general availability of this release. Informationregarding the availability status of the NLV publications is available at:

http://www.ibm.com/support/docview.wss?rs=886&context=SW860&uid=swg2701 7233

Deliverable Form number CATIA V5 Softcopy Collection Kit - French SK3T-4125CATIA V5 Softcopy Collection Kit - German SK3T-4126CATIA V5 Softcopy Collection Kit - Japanese SK3T-4127CATIA V5 Softcopy Collection Kit - Italian SK3T-0575

http://www.ibm.com/software/plm/services

http://www.ibm.com/common/ssi/cgi-bin/ssialias?infotype=an&subtype=ca&appname=gpateam&supplier=877&letternum=ENUSZP10-0026







http://www.ibm.com/support/docview.wss?rs=886&context=SW860&uid=swg27017233

http://www.ibm.com/support/docview.wss?rs=886&context=SW860&uid=swg27017233



Program number

Programnumber Program name

5628-ACN CATIA - System Program Order for Legacy Ordering Systems5628-CV5 CATIA - System Program Order for ESW Ordering5671-AB3 CATIA - Automotive Body in White Design 35671-ABT CATIA - Automotive Body in White Templates 25671-ADD CATIA - Advanced Design 25671-AM2 CATIA - Designer & Advanced Machinist 25671-AMG CATIA - Advanced Machining 25671-ANR DMU Engineering Analysis Review5671-ANL SIMULIA - Nonlinear Structural Analysis5671-ASD CATIA - Assembly Design 25671-ATH SIMULIA - Thermal Analysis5671-BK2 CATIA - Business Process Knowledge Template 25671-C12 CATIA - COM 1 to 2 Extension5671-CBD CATIA - Circuit Board Design 15671-CC1 CATIA - CADAM Interface 15671-CCV CATIA - Core & Cavity Design 25671-CD1 CATIA - Instant Collaborative Design 15671-CD3 CATIA - Composites Design 35671-CFO CATIA - Cast & Forged Part Optimizer 25671-CNA CATIA - Compartment & Access 25671-CPE CATIA - Composites Engineering 25671-CPM CATIA - Composites Design for Manufacturing 25671-CPR DMU Composites Review 25671-CV2 CATIA - Core & Cavity Design 25671-DAL MultiCAx - AD Plug-in5671-DEL MultiCAx - SE Plug-in5671-DF1 CATIA - Data Filtering 15671-DGL MultiCAx - IGES Plug-in5671-DI2 CATIA - Systems Diagrams 25671-DL1 CATIA - Developed Shapes 15671-DMN CATIA - DMU Navigator 25671-DMO DMU Optimizer 25671-DP2 CATIA - Drawing Production 25671-DR1 CATIA - Drafting 15671-DSE CATIA - Digitized Shape Editor 25671-DSL MultiCAx - SolidWorks Plug-in5671-DSS CATIA - Shape Sculptor 25671-DTL MultiCAx - STEP Plug-in5671-EC1 CATIA - Electrical 3D Design & Documentation 15671-ECR CATIA - Electrical Cableway Routing 25671-EHF CATIA - Electrical Harness Flattening 25671-EHI CATIA - Electrical Harness Installation 25671-EI2 CATIA - Electrical Wire Harness Installation 25671-ELB CATIA - Electrical Library 25671-ELD CATIA - Electrical Connectivity Diagrams 25671-EQT CATIA - Equipment Arrangement 25671-ER2 CATIA - Electrical Signal Routing 25671-EST CATIA - ELFINI Structural Analysis 25671-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 25671-EWR CATIA - Electrical Wire Routing 25671-FAR DMU Fastening Review 25671-FIT DMU Fitting Simulator 25671-FLX CATIA - Flex Physical Simulation 25671-FM1 CATIA - Functional Molded Parts 15671-FMD CATIA - FEM Solid 25671-FMP CATIA - Functional Molded Parts 25671-FMS CATIA - FEM Surface 25671-FR1 CATIA - Part Design Feature Recognition 15671-FS2 CATIA - FreeStyle Shaper 2

5671-FSK CATIA - FreeStyle Sketch TracerTM 1

5671-FSO CATIA - FreeStyle Optimizer 25671-FSP CATIA - FreeStyle Profiler 25671-FSS CATIA - FreeStyle Shaper 25671-FTA CATIA - 3D Functional Tolerancing & Annotation 2



5671-GAS CATIA - Generative Assembly Structural Analysis 25671-GDR CATIA - Generative Drafting 25671-GDY CATIA - Generative Dynamic Response Analysis 25671-GPS CATIA - Generative Part Structural Analysis 25671-GSD CATIA - Generative Shape Design 25671-GSO CATIA - Generative Shape Optimizer 25671-HA1 CATIA - Healing Assistant 15671-HAA Human Activity Analysis 25671-HAC Human Preferred Angles Catalog 25671-HBR Human Builder 25671-HD2 CATIA - Hybrid Design 25671-HGR CATIA - Hanger Design 25671-HME Human Measurements Editor 25671-HPA Human Posture Analysis 25671-HPC Human Posture Catalog 25671-HTC Human Anthropometry Catalog 25671-HVA CATIA - HVAC Design 25671-HVD CATIA - HVAC Diagrams 25671-I3D CATIA - 3D Insight 25671-IAE CATIA - ICEM Shape Design AeroExpert 25671-ID1 CATIA - Interactive Drafting 15671-IEX CATIA - ICEM Shape Design Expert 25671-IDL MultiCAx - ID Plug-in5671-IG1 CATIA - IGES Interface 15671-IMA CATIA - Imagine & Shape 25671-IRE CATIA - ICEM Shape Design Reverse Engineering 25671-ISD CATIA - ICEM Shape Design Real Time Renderer 25671-ISX CATIA - ICEM Shape Design Center & Expert 25671-KD3 CATIA - Business Process Knowledge Definition 35671-KIN DMU Kinematics Simulator 25671-KT1 CATIA - Knowledge Template 15671-KWA CATIA - Knowledge Advisor 25671-KWE CATIA - Knowledge Expert 25671-LMG CATIA - Lathe Machining 25671-LO1 CATIA - 2D Layout for 3D Design 15671-MBG CATIA - NC Machine Tool Builder 25671-MD1 CATIA - Mechanical Design 15671-MD2 CATIA - Mechanical Design 25671-ME1 CATIA - Mechanical Engineering 15671-ME2 CATIA - Mechanical Engineering 25671-MLG CATIA - Multi-slide Lathe Machining 25671-MMG CATIA - Multi-axis Surface Machining 25671-MO2 CATIA - Mold & Die Machinist 25671-MPA CATIA - Prismatic Machining Preparation Assistant 25671-MPG CATIA - Multi-pocket Machining 25671-MS2 CATIA - Mechanism Simulation 25671-MSG CATIA - NC Machine Tool Simulation 25671-MTD CATIA - Mold Tooling Design 25671-NCG CATIA - NC Manufacturing Review 25671-NL2 CATIA - National Language Softcopy Collection Kit5671-NVG CATIA - NC Manufacturing Verification 25671-PDG CATIA - Part Design 25671-PDL MultiCAx - PD Plug-in5671-PEO CATIA - Engineering Optimizer 25671-PFD CATIA - Function Definition 25671-PHS Photo Studio 25671-PID CATIA - Piping & Instrumentation Diagrams 25671-PIP CATIA - Piping Design 25671-PKT CATIA - Knowledge Template Definition 25671-PL2 CATIA - Plant Layout 25671-PLO CATIA - Plant Layout 15671-PM2 CATIA - Prismatic Machinist 25671-PMG CATIA - Prismatic Machining 25671-PSO Photo Studio Optimizer 25671-PX1 CATIA - PPR PDM Gateway 15671-QSR CATIA - Quick Surface Reconstruction 25671-RBM SIMULIA - Rule Based Meshing5671-RCD CATIA - Raceway & Conduit Design 25671-RE2 CATIA - Reverse Engineering 25671-RM2 CATIA - Preparation Mold & Die Machinist 25671-RP2 CATIA - Preparation Prismatic Machinist 25671-RSO CATIA - Realistic Shape Optimizer 25671-RTR Real Time Rendering 25671-SA2 CATIA - Structural Analysis 2



5671-SBD CATIA - Solid Based Design 25671-SD2 CATIA - Sheetmetal Design 25671-SDD CATIA - Ship Structure Detail Design 25671-SDI CATIA - Systems Diagrams 25671-SFD CATIA - Structure Functional Design 25671-SH1 CATIA - Sheetmetal Production 15671-SL3 CATIA - Aerospace Sheetmetal Design 35671-SMD CATIA - Sheetmetal Design 25671-SMG CATIA - 3 Axis Surface Machining 25671-SO2 CATIA - FreeStyle Optimizer 25671-SPA DMU Space Analysis 25671-SPE CATIA - DMU Space Engineering Assistant 25671-SR1 CATIA - Structure Design 15671-SRT CATIA - Systems Routing 15671-SSR CATIA - Systems Space Reservation 25671-ST1 CATIA - STEP Core Interface 15671-STC CATIA - Strim/Styler to C CATIA Interface 25671-STL CATIA - STL Rapid Prototyping 25671-SXT CATIA - Extended STEP Interface 25671-TG1 CATIA - Tooling Design 15671-TUB CATIA - Tubing Design 25671-TUD CATIA - Tubing Diagrams 25671-UDL MultiCAx - UD Plug-in5671-VOA Vehicle Occupant Accommodation 25671-WAV CATIA - Waveguide Design 25671-WD1 CATIA - Weld Design 15671-WGD CATIA - Waveguide Diagrams 25671-WS1 CATIA - Wireframe & Surface 15671-XM1 CATIA - Extended Mechanical Design 15671-XM2 CATIA - Extended Mechanical Design 25671-YM1 CATIA - Styled Mechanical Design 15671-YM2 CATIA - Styled Mechanical Design 25673-ABT CATIA - Automotive Body in White Templates 25673-AMG CATIA - Advanced Machining 25673-ANL SIMULIA - Nonlinear Structural Analysis5673-ANR DMU Engineering Analysis Review5673-AS1 CATIA - Assembly Design 15673-ASD CATIA - Assembly Design 25673-ASL CATIA - Aerospace Sheetmetal Design 35673-ATH SIMULIA - Thermal Analysis5673-BK2 CATIA - Business Process Knowledge Template 25673-BKT CATIA - Business Process Knowledge Template 35673-C12 CATIA - COM 1 to 2 Extension5673-CBD CATIA - Circuit Board Design 15673-CC1 CATIA - CADAM Interface 15673-CCD CATIA - CADAM Drafting for V55673-CCV CATIA - Core & Cavity Design 25673-CD1 CATIA - Instant Collaborative Design 15673-CFO CATIA - Cast & Forged Part Optimizer 25673-CNA CATIA - Compartment & Access 25673-CPE CATIA - Composites Engineering 25673-CPM CATIA - Composites Design for Manufacturing 25673-CPR DMU Composites Review 25673-DF1 CATIA - Data Filtering 15673-DL1 CATIA - Developed Shapes 15673-DMN CATIA - DMU Navigator 25673-DMO DMU Optimizer 25673-DN1 CATIA - DMU Navigator 15673-DSE CATIA - Digitized Shape Editor 25673-DSS CATIA - Shape Sculptor 25673-DT1 DMU Dimensioning & Tolerancing Review 15673-EC1 CATIA - Electrical 3D Design & Documentation 15673-ECR CATIA - Electrical Cableway Routing 25673-EHF CATIA - Electrical Harness Flattening 25673-EHI CATIA - Electrical Harness Installation 25673-ELB CATIA - Electrical Library 25673-ELD CATIA - Electrical Connectivity Diagrams 25673-EQT CATIA - Equipment Arrangement 25673-EST CATIA - ELFINI Structural Analysis 25673-EW1 CATIA - ENOVIAVPM Supply Chain Engineering Exchange 15673-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 25673-EWR CATIA - Electrical Wire Routing 25673-FAR DMU Fastening Review 25673-FIT DMU Fitting Simulator 2



5673-FLX CATIA - Flex Physical Simulation 25673-FM1 CATIA - Functional Molded Parts 15673-FMD CATIA - FEM Solid 25673-FMP CATIA - Functional Molded Parts 25673-FMS CATIA - FEM Surface 25673-FR1 CATIA - Part Design Feature Recognition 15673-FS1 CATIA - FreeStyle Shaper 15673-FSK CATIA - FreeStyle Sketch Tracer 15673-FSO CATIA - FreeStyle Optimizer 25673-FSP CATIA - FreeStyle Profiler 25673-FSS CATIA - FreeStyle Shaper 25673-FT1 CATIA - 3D Functional Tolerancing & Annotation 15673-FTA CATIA - 3D Functional Tolerancing & Annotation 25673-GAS CATIA - Generative Assembly Structural Analysis 25673-GD1 CATIA - Generative Drafting 15673-GDR CATIA - Generative Drafting 25673-GDY CATIA - Generative Dynamic Response Analysis 25673-GP1 CATIA - Generative Part Structural Analysis 15673-GPS CATIA - Generative Part Structural Analysis 25673-GS1 CATIA - Generative Shape Design 15673-GSD CATIA - Generative Shape Design 25673-GSO CATIA - Generative Shape Optimizer 25673-HA1 CATIA - Healing Assistant 15673-HAA Human Activity Analysis 25673-HAC Human Preferred Angles Catalog 25673-HBR Human Builder 25673-HGR CATIA - Hanger Design 25673-HME Human Measurements Editor 25673-HPA Human Posture Analysis 25673-HPC Human Posture Catalog 25673-HTC Human Anthropometry Catalog 25673-HVA CATIA - HVAC Design 25673-HVD CATIA - HVAC Diagrams 25673-IAE CATIA - ICEM Shape Design AeroExpert 25673-ICM CATIA - ICEM Shape Design Center 25673-ID1 CATIA - Interactive Drafting 15673-IEX CATIA - ICEM Shape Design Expert 25673-IG1 CATIA - IGES Interface 15673-IMA CATIA - Imagine & Shape 25673-KE1 CATIA - Knowledge Expert 15673-KIN DMU Kinematics Simulator 25673-KT1 CATIA - Knowledge Template 15673-KWA CATIA - Knowledge Advisor 25673-KWE CATIA - Knowledge Expert 25673-LG1 CATIA - Lathe Machining 15673-LMG CATIA - Lathe Machining 25673-LO1 CATIA - 2D Layout for 3D Design 15673-MBG CATIA - NC Machine Tool Builder 25673-MLG CATIA - Multi-slide Lathe Machining 25673-MMG CATIA - Multi-axis Surface Machining 25673-MPA CATIA - Prismatic Machining Preparation Assistant 25673-MPG CATIA - Multi-pocket Machining 25673-MSG CATIA - NC Machine Tool Simulation 25673-MTD CATIA - Mold Tooling Design 25673-NCG CATIA - NC Manufacturing Review 25673-NG1 CATIA - NC Manufacturing Review 15673-NVG CATIA - NC Manufacturing Verification 25673-PD1 CATIA - Part Design 15673-PDG CATIA - Part Design 25673-PEO CATIA - Engineering Optimizer 25673-PFD CATIA - Function Definition 25673-PG1 CATIA - Prismatic Machining 15673-PH1 Photo Studio 15673-PHS Photo Studio 25673-PID CATIA - Piping & Instrumentation Diagrams 25673-PIP CATIA - Piping Design 25673-PKT CATIA - Knowledge Template Definition 25673-PLO CATIA - Plant Layout 15673-PMG CATIA - Prismatic Machining 25673-PSO Photo Studio Optimizer 25673-PX1 CATIA - PPR PDM Gateway 15673-QSR CATIA - Quick Surface Reconstruction 25673-RBM SIMULIA - Rule Based Meshing5673-RCD CATIA - Raceway & Conduit Design 2



5673-RM1 Digital Rights Manager 15673-RSO CATIA - Realistic Shape Optimizer 25673-RT1 Real Time Rendering 15673-RTR Real Time Rendering 25673-SDD CATIA - Ship Structure Detail Design 25673-SDI CATIA - Systems Diagrams 25673-SFD CATIA - Structure Functional Design 25673-SH1 CATIA - Sheetmetal Production 15673-SM1 CATIA - Sheetmetal Design 15673-SMD CATIA - Sheetmetal Design 25673-SMG CATIA - 3 Axis Surface Machining 25673-SP1 DMU Space Analysis 15673-SPA DMU Space Analysis 25673-SPE CATIA - DMU Space Engineering Assistant 25673-SR1 CATIA - Structure Design 15673-SRT CATIA - Systems Routing 15673-SSR CATIA - Systems Space Reservation 25673-ST1 CATIA - STEP Core Interface 15673-STC CATIA - Strim/Styler to C CATIA Interface 25673-STL CATIA - STL Rapid Prototyping 25673-SXT CATIA - Extended STEP Interface 25673-TG1 CATIA - Tooling Design 15673-TL1 CATIA - STL Rapid Prototyping 15673-TUB CATIA - Tubing Design 25673-TUD CATIA - Tubing Diagrams 25673-VOA Vehicle Occupant Accommodation 25673-WAV CATIA - Waveguide Design 25673-WD1 CATIA - Weld Design 15673-WGD CATIA - Waveguide Diagrams 25673-WS1 CATIA - Wireframe & Surface 15691-AB3 CATIA - Automotive Body in White Design 35691-ABT CATIA - Automotive Body in White Templates 25691-ADD CATIA - Advanced Design 25691-AM2 CATIA - Designer & Advanced Machinist 25691-AMG CATIA - Advanced Machining 25691-ANL SIMULIA Nonlinear Structural Analysis5691-ANR DMU Engineering Analysis Review5691-ASD CATIA - Assembly Design 25691-ATH SIMULIA Thermal Analysis5691-BK2 CATIA - Business Process Knowledge Template 25691-C12 CATIA - COM 1 to 2 Extension5691-CBD CATIA - Circuit Board Design 15691-CC1 CATIA - CADAM Interface 15691-CCV CATIA - Core & Cavity Design 25691-CD1 CATIA - Instant Collaborative Design 15691-CD3 CATIA - Composites Design 35691-CFO CATIA - Cast & Forged Part Optimizer 25691-CNA CATIA - Compartment & Access 25691-CPE CATIA - Composites Engineering 25691-CPM CATIA - Composites Design for Manufacturing 25691-CPR DMU Composites Review 25691-CV2 CATIA - Core & Cavity Design 25691-DAL MultiCAx - AD Plug-in5691-DEL MultiCAx - SE Plug-in5691-DF1 CATIA - Data Filtering 15691-DGL MultiCAx - IGES Plug-in5691-DI2 CATIA - Systems Diagrams 25691-DL1 CATIA - Developed Shapes 15691-DMN CATIA - DMU Navigator 25691-DMO DMU Optimizer 25691-DP2 CATIA - Drawing Production 25691-DR1 CATIA - Drafting 15691-DSE CATIA - Digitized Shape Editor 25691-DSL MultiCAx - SolidWorks Plug-in5691-DSS CATIA - Shape Sculptor 25691-DTL MultiCAx - STEP Plug-in5691-EC1 CATIA - Electrical 3D Design & Documentation 15691-ECR CATIA - Electrical Cableway Routing 25691-EHF CATIA - Electrical Harness Flattening 25691-EHI CATIA - Electrical Harness Installation 25691-EI2 CATIA - Electrical Wire Harness Installation 25691-ELB CATIA - Electrical Library 25691-ELD CATIA - Electrical Connectivity Diagrams 25691-EQT CATIA - Equipment Arrangement 2



5691-ER2 CATIA - Electrical Signal Routing 25691-EST CATIA - ELFINI Structural Analysis 25691-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 25691-EWR CATIA - Electrical Wire Routing 25691-FAR DMU Fastening Review 25691-FIT DMU Fitting Simulator 25691-FLX CATIA - Flex Physical Simulation 25691-FM1 CATIA - Functional Molded Parts 15691-FMD CATIA - FEM Solid 25691-FMP CATIA - Functional Molded Parts 25691-FMS CATIA - FEM Surface 25691-FR1 CATIA - Part Design Feature Recognition 15691-FS2 CATIA - FreeStyle Shaper 25691-FSK CATIA - FreeStyle Sketch Tracer 15691-FSO CATIA - FreeStyle Optimizer 25691-FSP CATIA - FreeStyle Profiler 25691-FSS CATIA - FreeStyle Shaper 25691-FTA CATIA - 3D Functional Tolerancing & Annotation 25691-GAS CATIA - Generative Assembly Structural Analysis 25691-GDR CATIA - Generative Drafting 25691-GDY CATIA - Generative Dynamic Response Analysis 25691-GPS CATIA - Generative Part Structural Analysis 25691-GSD CATIA - Generative Shape Design 25691-GSO CATIA - Generative Shape Optimizer 25691-HA1 CATIA - Healing Assistant 15691-HAA Human Activity Analysis 25691-HAC Human Preferred Angles Catalog 25691-HBR Human Builder 25691-HD2 CATIA - Hybrid Design 25691-HGR CATIA - Hanger Design 25691-HME Human Measurements Editor 25691-HPA Human Posture Analysis 25691-HPC Human Posture Catalog 25691-HTC Human Anthropometry Catalog 25691-HVA CATIA - HVAC Design 25691-HVD CATIA - HVAC Diagrams 25691-ID3 CATIA - 3D Insight 25691-IAE CATIA - ICEM Shape Design AeroExpert 25691-ID1 CATIA - Interactive Drafting 15691-IDL MultiCAx - ID Plug-in5691-IEX CATIA - ICEM Shape Design Expert 25691-IG1 CATIA - IGES Interface 15691-IMA CATIA - Imagine & Shape 25691-IRE CATIA - ICEM Shape Design Reverse Engineering 25691-ISD CATIA - ICEM Shape Design Real Time Renderer 25691-ISX CATIA - ICEM Shape Design Center & Expert 25691-KD3 CATIA - Business Process Knowledge Definition 35691-KIN DMU Kinematics Simulator 25691-KT1 CATIA - Knowledge Template 15691-KWA CATIA - Knowledge Advisor 25691-KWE CATIA - Knowledge Expert 25691-LMG CATIA - Lathe Machining 25691-LO1 CATIA - 2D Layout for 3D Design 15691-MBG CATIA - NC Machine Tool Builder 25691-MD1 CATIA - Mechanical Design 15691-MD2 CATIA - Mechanical Design 25691-ME1 CATIA - Mechanical Engineering 15691-ME2 CATIA - Mechanical Engineering 25691-MLG CATIA - Multi-slide Lathe Machining 25691-MMG CATIA - Multi-axis Surface Machining 25691-MO2 CATIA - Mold & Die Machinist 25691-MPA CATIA - Prismatic Machining Preparation Assistant 25691-MPG CATIA - Multi-pocket Machining 25691-MS2 CATIA - Mechanism Simulation 25691-MSG CATIA - NC Machine Tool Simulation 25691-MTD CATIA - Mold Tooling Design 25691-NCG CATIA - NC Manufacturing Review 25691-NVG CATIA - NC Manufacturing Verification 25691-PDG CATIA - Part Design 25691-PDL MultiCAx - PD Plug-in5691-PEO CATIA - Engineering Optimizer 25691-PFD CATIA - Function Definition 25691-PHS Photo Studio 25691-PID CATIA - Piping & Instrumentation Diagrams 2



5691-PIP CATIA - Piping Design 25691-PKT CATIA - Knowledge Template Definition 25691-PL2 CATIA - Plant Layout 25691-PLO CATIA - Plant Layout 15691-PM2 CATIA - Prismatic Machinist 25691-PMG CATIA - Prismatic Machining 25691-PSO Photo Studio Optimizer 25691-PX1 CATIA - PPR PDM Gateway 15691-QSR CATIA - Quick Surface Reconstruction 25691-RBM SIMULIA - Rule Based Meshing5691-RCD CATIA - Raceway & Conduit Design 25691-RE2 CATIA - Reverse Engineering 25691-RM2 CATIA - Preparation Mold & Die Machinist 25691-RP2 CATIA - Preparation Prismatic Machinist 25691-RSO CATIA - Realistic Shape Optimizer 25691-RTR Real Time Rendering 25691-SA2 CATIA - Structural Analysis 25691-SBD CATIA - Solid Based Design 25691-SD2 CATIA - Sheetmetal Design 25691-SDD CATIA - Ship Structure Detail Design 25691-SDI CATIA - Systems Diagrams 25691-SFD CATIA - Structure Functional Design 25691-SH1 CATIA - Sheetmetal Production 15691-SL3 CATIA - Aerospace Sheetmetal Design 35691-SMD CATIA - Sheetmetal Design 25691-SMG CATIA - 3 Axis Surface Machining 25691-SO2 CATIA - FreeStyle Optimizer 25691-SPA DMU Space Analysis 25691-SPE CATIA - DMU Space Engineering Assistant 25691-SR1 CATIA - Structure Design 15691-SRT CATIA - Systems Routing 15691-SSR CATIA - Systems Space Reservation 25691-ST1 CATIA - STEP Core Interface 15691-STC CATIA - Strim/Styler to C CATIA Interface 25691-STL CATIA - STL Rapid Prototyping 25691-SXT CATIA - Extended STEP Interface 25691-TG1 CATIA - Tooling Design 15691-TUB CATIA - Tubing Design 25691-TUD CATIA - Tubing Diagrams 25691-UDL MultiCAx - UD Plug-in5691-VOA Vehicle Occupant Accommodation 25691-WAV CATIA - Waveguide Design 25691-WD1 CATIA - Weld Design 15691-WGD CATIA - Waveguide Diagrams 25691-WS1 CATIA - Wireframe & Surface 15691-XM1 CATIA - Extended Mechanical Design 15691-XM2 CATIA - Extended Mechanical Design 25691-YM1 CATIA - Styled Mechanical Design 15691-YM2 CATIA - Styled Mechanical Design 25693-ABT CATIA - Automotive Body in White Templates 25693-AMG CATIA - Advanced Machining 25693-ANL SIMULIA - Nonlinear Structrual Analysis5693-ANR DMU Engineering Analysis Review5693-AS1 CATIA - Assembly Design 15693-ASD CATIA - Assembly Design 25693-ASL CATIA - Aerospace Sheetmetal Design 35693-ATH SIMULIA - Thermal Analysis5693-BK2 CATIA - Business Process Knowledge Template 25693-BKT CATIA - Business Process Knowledge Template 35693-C12 CATIA - COM 1 to 2 Extension5693-CBD CATIA - Circuit Board Design 15693-CC1 CATIA - CADAM Interface 15693-CCD CATIA - CADAM Drafting for V55693-CCV CATIA - Core & Cavity Design 25693-CD1 CATIA - Instant Collaborative Design 15693-CFO CATIA - Cast & Forged Part Optimizer 25693-CNA CATIA - Compartment & Access 25693-CPE CATIA - Composites Engineering 25693-CPM CATIA - Composites Design for Manufacturing 25693-CPR DMU Composites Review 25693-DF1 CATIA - Data Filtering 15693-DL1 CATIA - Developed Shapes 15693-DMN CATIA - DMU Navigator 25693-DMO DMU Optimizer 2



5693-DN1 CATIA - DMU Navigator 15693-DSE CATIA - Digitized Shape Editor 25693-DSS CATIA - Shape Sculptor 25693-DT1 DMU Dimensioning & Tolerancing Review 15693-EC1 CATIA - Electrical 3D Design & Documentation 15693-ECR CATIA - Electrical Cableway Routing 25693-EHF CATIA - Electrical Harness Flattening 25693-EHI CATIA - Electrical Harness Installation 25693-ELB CATIA - Electrical Library 25693-ELD CATIA - Electrical Connectivity Diagrams 25693-EQT CATIA - Equipment Arrangement 25693-EST CATIA - ELFINI Structural Analysis 25693-EW1 CATIA - ENOVIAVPM Supply Chain Engineering Exchange 15693-EWE CATIA - ENOVIAVPM Supply Chain Engineering Exchange 25693-EWR CATIA - Electrical Wire Routing 25693-FAR DMU Fastening Review 25693-FIT DMU Fitting Simulator 25693-FLX CATIA - Flex Physical Simulation 25693-FM1 CATIA - Functional Molded Parts 15693-FMD CATIA - FEM Solid 25693-FMP CATIA - Functional Molded Parts 25693-FMS CATIA - FEM Surface 25693-FR1 CATIA - Part Design Feature Recognition 15693-FS1 CATIA - FreeStyle Shaper 15693-FSK CATIA - FreeStyle Sketch Tracer 15693-FSO CATIA - FreeStyle Optimizer 25693-FSP CATIA - FreeStyle Profiler 25693-FSS CATIA - FreeStyle Shaper 25693-FT1 CATIA - 3D Functional Tolerancing & Annotation 15693-FTA CATIA - 3D Functional Tolerancing & Annotation 25693-GAS CATIA - Generative Assembly Structural Analysis 25693-GD1 CATIA - Generative Drafting 15693-GDR CATIA - Generative Drafting 25693-GDY CATIA - Generative Dynamic Response Analysis 25693-GP1 CATIA - Generative Part Structural Analysis 15693-GPS CATIA - Generative Part Structural Analysis 25693-GS1 CATIA - Generative Shape Design 15693-GSD CATIA - Generative Shape Design 25693-GSO CATIA - Generative Shape Optimizer 25693-HA1 CATIA - Healing Assistant 15693-HAA Human Activity Analysis 25693-HAC Human Preferred Angles Catalog 25693-HBR Human Builder 25693-HGR CATIA - Hanger Design 25693-HME Human Measurements Editor 25693-HPA Human Posture Analysis 25693-HPC Human Posture Catalog 25693-HTC Human Anthropometry Catalog 25693-HVA CATIA - HVAC Design 25693-HVD CATIA - HVAC Diagrams 25693-IAE CATIA - ICEM Shape Design AeroExpert 25693-ICM CATIA - ICEM Shape Design Center 25693-ID1 CATIA - Interactive Drafting 15693-IEX CATIA - ICEM Shape Design Expert 25693-IG1 CATIA - IGES Interface 15693-IMA CATIA - Imagine & Shape 25693-KE1 CATIA - Knowledge Expert 15693-KIN DMU Kinematics Simulator 25693-KT1 CATIA - Knowledge Template 15693-KWA CATIA - Knowledge Advisor 25693-KWE CATIA - Knowledge Expert 25693-LG1 CATIA - Lathe Machining 15693-LMG CATIA - Lathe Machining 25693-LO1 CATIA - 2D Layout for 3D Design 15693-MBG CATIA - NC Machine Tool Builder 25693-MLG CATIA - Multi-slide Lathe Machining 25693-MMG CATIA - Multi-axis Surface Machining 25693-MPA CATIA - Prismatic Machining Preparation Assistant 25693-MPG CATIA - Multi-pocket Machining 25693-MSG CATIA - NC Machine Tool Simulation 25693-MTD CATIA - Mold Tooling Design 25693-NCG CATIA - NC Manufacturing Review 25693-NG1 CATIA - NC Manufacturing Review 15693-NVG CATIA - NC Manufacturing Verification 2



5693-PD1 CATIA - Part Design 15693-PDG CATIA - Part Design 25693-PEO CATIA - Engineering Optimizer 25693-PFD CATIA - Function Definition 25693-PG1 CATIA - Prismatic Machining 15693-PH1 Photo Studio 15693-PHS Photo Studio 25693-PID CATIA - Piping & Instrumentation Diagrams 25693-PIP CATIA - Piping Design 25693-PKT CATIA - Knowledge Template Definition 25693-PLO CATIA - Plant Layout 15693-PMG CATIA - Prismatic Machining 25693-PSO Photo Studio Optimizer 25693-PX1 CATIA - PPR PDM Gateway 15693-QSR CATIA - Quick Surface Reconstruction 25693-RBM SIMULIA - Rule Based Meshing5693-RCD CATIA - Raceway & Conduit Design 25693-RM1 Digital Rights Manager 15693-RSO CATIA - Realistic Shape Optimizer 25693-RT1 Real Time Rendering 15693-RTR Real Time Rendering 25693-SDD CATIA - Ship Structure Detail Design 25693-SDI CATIA - Systems Diagrams 25693-SFD CATIA - Structure Functional Design 25693-SH1 CATIA - Sheetmetal Production 15693-SM1 CATIA - Sheetmetal Design 15693-SMD CATIA - Sheetmetal Design 25693-SMG CATIA - 3 Axis Surface Machining 25693-SP1 DMU Space Analysis 15693-SPA DMU Space Analysis 25693-SPE CATIA - DMU Space Engineering Assistant 25693-SR1 CATIA - Structure Design 15693-SRT CATIA - Systems Routing 15693-SSR CATIA - Systems Space Reservation 25693-ST1 CATIA - STEP Core Interface 15693-STC CATIA - Strim/Styler to CATIA Interface 25693-STL CATIA - STL Rapid Prototyping 25693-SXT CATIA - Extended STEP Interface 25693-TG1 CATIA - Tooling Design 15693-TL1 CATIA - STL Rapid Prototyping 15693-TUB CATIA - Tubing Design 25693-TUD CATIA - Tubing Diagrams 25693-VOA Vehicle Occupant Accommodation 25693-WAV CATIA - Waveguide Design 25693-WD1 CATIA - Weld Design 15693-WGD CATIA - Waveguide Diagrams 25693-WS1 CATIA - Wireframe & Surface 1

Additional details

This section describes the new configurations, products, and enhancementsto previously announced products delivered in this release. For descriptions ofpreviously announced products and other PLM solutions, visit the PLM Web site

http://www.ibm.com/solutions/plm

New Platform 2 (P2) configurations

CATIA V5.20 introduces four configurations.

Product Synthesis

CATIA - 3D Insight 2 (I3D)

3D Insight 2 complies with United States Federal Aviation Administration (USFAA) certification policies that require there be only one model and one modifier,a primary engineer, during the entire development, deployment, manufacturing,and management life cycle. It is especially dedicated to collaborators who need toaccess and use the 3D product definition. It provides review capabilities (including

http://www.ibm.com/solutions/plm



3D tolerancing and annotation) and allows you to perform a precise analysis of thegeometric product definition. 3D Insight does not allow you to save or export thecreated/modified data in order to prevent any changes to the 3D product definition.

3D Insight allows exact sectioning, exact measurement, sketch examination,construction, and additional geometry creation for analysis, 3D FunctionalTolerancing & Annotation (FTA) and 2D Layout for 3D Design (LO1) data reviewmark-up. It does not allow you to save the created data or to export it. You canperform geometric analysis of the product within the manufacturing/assembly/inspection tooling context.

This configuration is subject to controlled availability in this release.

Shape Design and Styling

This release introduces the suite of advanced and powerful ICEM Class A free-formsurface creation, modification, and analysis capabilities within the Class A modelingdomain.

CATIA - ICEM Shape Design Reverse Engineering 2 (IRE)

The CATIA - ICEM Shape Design Reverse Engineering 2 configuration deliversall the tools needed to cover the reverse engineering process through to Class Asurfacing. Capabilities include importing digitized data, clean up and tessellation withDigitized Shape Editor 2 (DSE), surface recovering and finishing with Quick SurfaceReconstruction 2 (QSR), polygon modeling with Shape Sculptor 2 (DSS), and thecreation, modification and analysis of high-quality curve and surface geometry toClass A standards with ICEM Shape Design Center 2 (ICM).

ICEM Shape Design Reverse Engineering 2 includes:

CATIA - ICEM Shape Design Center 2 (ICM)CATIA - Freestyle Shaper 2 (FSS)CATIA - Shape Sculptor 2 (DSS)CATIA - Generative Shape Design 1 (GS1)CATIA - Quick Surface Reconstruction 2 (QSR)CATIA - Digitized Shape Editor 2 (DSE)CATIA - IGES Interface 1 (IG1)CATIA - V4 Integration 2 (V4I)CATIA - STEP Core Interface 1 (ST1)CATIA - Object Manager 2 (COM)

CATIA - ICEM Shape Design Real Time Renderer 2 (ISD)

The CATIA - ICEM Shape Design Real Time Renderer 2 configuration supplies allthe tools needed to develop Class A surfaces through to the generation of realtime renderings. Capabilities include the creation, modification and analysis ofhigh-quality curve and surface geometry to Class A standards with ICEM ShapeDesign Center 2 (ICM). It allows designers to interactively create realistic anddynamic renderings and animations of Class A geometry in real time using Real TimeRendering 2 (RTR).

ICEM Shape Design Real Time Render 2 includes:

CATIA - ICEM Shape Design Center 2 (ICM)Real Time Rendering 2 (RTR)CATIA - Freestyle Shaper 2 (FSS)CATIA - CATIA Generative Shape Design 1 (GS1)CATIA - IGES Interface 1 (IG1)CATIA - V4 Integration 2 (V4I)CATIA - STEP Core Interface 1 (ST1)CATIA - Object Manager 2 (COM)



CATIA - ICEM Shape Design Center & Expert 2 (ISX)

The CATIA - ICEM Shape Design Center & Expert 2 configuration provides extendedsurface modeling and analysis. Capabilities include global shape mapping anddeformation and extensions to base functions, such as advanced filleting, globalblending, sweeping, and global flange creation. It also offers feature modeling andspecialized functions dedicated to engineering features and advanced analysis tocheck head impact areas, gaps, and component levels.

ICEM Shape Design Center & Expert 2 includes:

CATIA - ICEM Shape Design Center (ICM)CATIA - ICEM Shape Design Expert (IEX)CATIA - Freestyle Shaper 2 (FSS)CATIA - CATIA Generative Shape Design 1 (GS1)CATIA - IGES Interface 1 (IG1)CATIA - V4 Integration 2 (V4I)CATIA - STEP Core Interface 1 (ST1)CATIA - Object Manager 2 (COM)

New P2 products

CATIA V5.20 introduces seven products.

Product Synthesis

CATIA - 3D Insight 2 (I3P)

• Product structure: 3D Insight offers a subset of the Product Structure productwithout the ability to save the created data. It defines mechanical assemblyconstraints, automatically positions parts, and checks assembly consistency.

• Interactive drafting for drawing production: 3D Insight offers a subset ofInteractive Design product without the capability to save the imported data andto export in any 2D format. You can address 2D design and drawing productionrequirements.

• IGES and STEP interfaces: 3D Insight offers a subset of IGES and STEPinterfaces. You can import data but cannot export data. CATIA - IGES helps usersworking in a heterogeneous CAD/CAM environment to exchange data through theneutral IGES format. With STEP, you can read and write data in STEP AP214 andSTEP AP203 data formats.

• DMU navigation and DMU dimensioning and tolerancing review forreviewing and model interrogation: 3D Insight offers a subset of DMUNavigator and DMU Dimensioning & Tolerancing Review products withoutthe ability to save the data. CATIA DMU Navigator allows you to perform acollaborative digital mock-up review using powerful visualization, navigation,and communication tools. DMU Dimensioning and Tolerancing Review lets youvisualize, query, and filter mechanical dimensioning and tolerancing information.

• Wireframe and surface for non-persistent data authoring: 3D Insight offersa subset of the Wireframe & Surface product without the capability to save thecreated data. You can create in-context wireframe construction elements and basicsurfaces.

• V4 integration: 3D Insight offers a subset of the V4 Integration product. It helpsexisting CATIA V4 customers take advantage of the advanced technologies of V5while preserving their investment in V4 data.

Note: This product is available only as an included product in the CATIA - 3DInsight 2 configuration (I3D), which is subject to controlled availability in thisrelease.


CATIA - ICEM Shape Design Center 2 (ICM)



CATIA - ICEM Shape Design Center 2 (ICM) is the foundation of the ICEM shapedesign (ISD) product portfolio. It offers advanced surface and curve functionsto create, modify, and analyze aesthetic and ergonomic shapes to the highestquality. It supports a hybrid environment for both explicit and feature-basedsurface modeling. With traditional direct surface modeling techniques as the base,accompanied by strong associative and feature-based modeling methodology, ICEMShape Design Center 2 significantly improves productivity within the Class A designprocess, delivering new levels of integration within the product development lifecycle.

ICEM Shape Design Center 2 is available only as an AOP.

CATIA - ICEM Shape Design Expert 2 (IEX)

CATIA - ICEM Shape Design Expert offers an extended tool set that complementsthe ICEM Shape Design Center 2 product. This add-on module enables the creationand modeling of aesthetic and ergonomic shapes using advanced global surfacemodeling and shape modeling capabilities. In addition, this product providesspecialized Class A and dedicated industry-specific functions, such as advancedfilleting, tri-tangent filleting, gap creation, accelerated surfaces, and featuremodeling.

ICEM Shape Design Expert 2 is available as both a shareable product and an AOP.

CATIA - ICEM Shape Design AeroExpert 2 (IAE)

CATIA - ICEM Shape Design AeroExpert 2 is a dedicated workbench for creating andmodifying surfaces within the aeronautical surface modeling domain. Its specializedmodeling functions and global modeling capabilities support typical aerospaceworkflow and processes. The configuration offers a comprehensive hybrid modelingenvironment for both explicit and feature-based surface modeling for high-qualitysurface generation, modeling, and analysis. AeroExpert addresses both engineeringand aeronautical needs by generating high-quality smooth but simple surfaces whilerespecting strict engineering tolerance requirements.

ICEM Shape Design AeroExpert 2 is available as both a shareable and add-on (AOP)product.

SIMULIA Extended Analysis

This release introduces the SIMULIA suite of extended analysis products fornonlinear and thermal analysis in CATIA V5..

SIMULIA - Nonlinear Structural Analysis (ANL)

Nonlinear Structural Analysis extends the capabilities of Generative PartStructural Analysis (GPS) to include more advanced analysis effects, such as largedisplacements and permanent material deformation. Material plasticity, typical ofmetals, can be modeled, as well as the nonlinear elasticity in hyper-elastic materialslike rubber. Nonlinear Structural Analysis also provides more advanced contactcapabilities, such as friction at contacting surfaces and the automatic detection ofcontact surfaces based on their proximity. When used in conjunction with ThermalAnalysis (ATH), a new class of analysis problems can be tackled. Nonlinear structuralanalysis can be performed, including the effects of the temperature distributioncalculated by Thermal Analysis, which can cause parts to expand and contract andalso affect their material properties.

Nonlinear Structural Analysis is available as both a shareable product and an AOP.

SIMULIA - Thermal Analysis (ATH)

SIMULIA - Thermal Analysis (ATH) extends the capabilities of Generative Part Design(GPS), allowing designers to understand the thermal behavior of their designs. Asteady-state or transient temperature distribution can be calculated in responseto direct heating of a surface, the flow of a fluid past a surface, or the specifiedtemperature of the surface. The thermal material properties can be temperature



dependent. When analyzing assemblies, the conductivity across the interfacebetween contacting parts can be specified.

When Thermal Analysis is used in conjunction with Nonlinear Structural Analysis(ANL), a new class of analysis problems can be tackled. Nonlinear structural analysiscan be performed, including the effects of the temperature distribution calculated byThermal Analysis, which can cause parts to expand and contract and also affect theirmaterial properties.

Thermal Analysis is available as both a shareable product and an AOP.

SIMULIA - Rule Based Meshing (RBM)

SIMULIA - Rule Based Meshing extends the capabilities of FMS to enable automatedand higher quality surface meshing for all work flows that use CATIA meshing tools.It gives you the means to specify globally the desired meshing treatment of entitiessuch as holes, fillets, and beads. Rules Based Meshing also gives you a means tospecify acceptable element quality criteria, such as minimum edge length, aspectratio, and skewness. Once the complete set of meshing rules has been specified,no additional user involvement is necessary, as the actual mesh generation iscompletely automated.

Rules Based Meshing features:

• Fully automatic meshing of complex surface geometry: Once the rules havebeen defined, you only need to push a button, and Rules Based Meshing generatesthe mesh automatically. Automatic meshing greatly increases productivity becausemuch less time is spent making manual improvements to the mesh.

• Higher quality surface meshes with fewer elements: The end-result of therules-based meshing process is a higher quality and more efficient surface meshthan was possible previously. The mesh is optimized based on the rules, which ismuch more efficient than manual operations. Rather than modifying and refiningthe mesh where you notice problems, Rule Based Meshing considers the meshingproblem in a global sense and does not need to over-refine to meet meshingobjectives.

• User-defined rules to completely govern the treatment of commongeometric entities: Rules Based Meshing can recognize common geometricentities, such as holes, fillets, and beads, and treat them in a manner consistentwith your requirements. For example, you can specify that holes with a diameterof less than 5 mm be removed, holes between 5 mm and 10 mm should havea single washer layer of six elements around the circumference, whereas holeswith a diameter between 10 mm and 15 mm have two washer layers aroundthe circumference. Using this approach, you can ensure consistent treatment ofgeometry from one region to the next and from one model to the next.

• Pre-specified mesh quality targets to guide the mesher to create mesheswith the desired level of quality: In addition to consistent treatment ofcommon geometric entities, Rules Based Meshing lets the you specify meshquality targets to satisfy objectives for global quality. You can specify limits forelement geometry, such as minimum edge length, element aspect ratio, andelement skewness, to ensure that element shape is not detrimental to simulationresults.

• Consistent meshing results for all geometries subjected to the samemeshing: Because Rules Based Meshing let you use the same set of rules for anynumber of part meshes, it ensures a high level of consistency in meshing results.Such consistency is very important, especially when comparing models with minorvariations. In such cases it is important that differences in the meshes do notinfluence the results.

• Easily selected meshing rules appropriate to the target discipline: Eachsimulation discipline has its own mesh requirements to produce high-qualityresults with an acceptable number of elements. With Rules Based Meshing, youcan easily select the appropriate set of rules for the target simulation discipline,such as noise vibration harshness (NVH), durability, and crash.



Rule Based Meshing is available as both a shareable product and an AOP. It issubject to controlled availability in this release.

Infrastructure

CATIA - Extended STEP Interface 2 (SXT)

CATIA - Extended STEP Interface delivers new STEP capabilities for long-termarchiving and corporate processes.

• Nested assembly export: Large assemblies can be exported in multiple STEPfiles, with one file for each product. There are two possible options, global andpartial. Global generates STEP files for all levels of an assembly, while partialgenerates the STEP file for only one product (sub-levels are not exported).

• Support of FTA in STEP exchanges: You can store a true copy of the CATIAFT&A presentation in STEP format and retrieve it using WYSIWYG import-export.

• Supports validation properties:

– A global parts and assembly level offers center of gravity, volume, and area.

– A body level offers center of gravity and volume, with areas checked for eachsolid/surface.

– New validation properties target part shape, such as faces and edges.

• Additional functions

– Geometric dimensioning and tolerancing (GD&T)

– Applicative data enabling, such as for composites

– Clouds of points (COPS) properties checks for geometric faces and edges

Extended STEP Interface 2 is available as both a shareable product and an AOP.

Enhanced CATIA Platform 1 (P1) products

Enhancements to a P1 product also apply to the corresponding P2 product.

Mechanical Design

CATIA - Functional Molded Parts 1 (FM1)

This release enhances the general usability of functional modeling capabilities.

CATIA - Wireframe and Surface 1 (WS1)

• Isolation of Generative Shape Design (GSD) features: You can now isolateany GSD feature. Isolating a feature breaks any links with its inputs so thatthe feature becomes a datum feature that cannot be updated. This productivityenhancement eliminates the need to copy the geometry of the feature and thenreplace the feature with the copy.

• Repetition GSD mechanism: This release adds a relative mode for the creationof repetition features. It allows you to create repeated features in an absolute(existing) or relative (new) mode. You can create repeated features relatively sothat every repeated feature refers to the parameters of the previously createdfeature.

• Repetition GSD mechanism with datum mode on: This enhancement addsthe capability of using the repetition mechanism with the datum mode on. It letsyou use the Repeat after OK command with the datum mode on, increasing theusability of the command.

• Point on curve along a direction: This new option in the Point commandenables you to create a point on a curve along a direction and an offset distance(in the direction specified).

• Multiselection mechanism enhancements: This enhancement of the datamodel for the MultiSel mechanism lets you aggregate all the common featuresof the multiselection function directly on the generated MultiOutPut feature. Itapplies to all classic CATIA behaviors, such as parent-child, historical graph, and



copy-paste. This enhancement makes the understanding of the multiselection datamodel clearer.

• Integration of functional tolerancing and annotation (FTA) elementsselection in 2D mode: This enhancement to the 2D mode architecture enablesyou to select non-geometrical elements such as FTA as support. You can nowselect a 3D annotation, such as text or a flag note, as an input plane to the 2Dmode.

• Extrude and cylinder--mirror extent: This enhancement provides a checkbutton on the Extrude, Volume Extrude, and Cylinder panels. When selected,it allows you to create mirrored (symmetrical about the input profile) extrudedvolume or extruded cylinder features.

CATIA - Healing Assistant 1 (HA1)

This release introduces a compare and review function that can be used to supporta review and approval process for design geometric changes. It speeds the approvalprocess for a new revision of part geometry and makes it easier to understand theimpact of part modifications to downstream processes such as tooling, machining,analysis, and inspection.

CATIA - Interactive Drafting 1 (ID1)

• New DS ISO 1 open type font and its related XML standard file The DSISO 1 open type font helps represent annotations in a way that suits the variousISO norms for defining text representation (IS open type O 3098 norms). Thiscapability enhances the level of compliancy with both ISO and JIS norms whendrawings contain annotations that include western characters. It also makes iteasier to make sure that any partner will be able to display such drawings in anidentical way on their machine without the need for exchange and installation of aspecific font because DS ISO 1 is provided by default.

• True type collection and font linking: Enhancements in this release supportTrue Type Collection fonts and font linking.

– Individual fonts present in True Type Collection fonts are available for use. Forexample, if Batang.ttc is available on the system, four additional fonts such asBatang, Batangche, Gungsuh, and Gungsuhche are made available.

– If a certain glyph is missing from a font file, this glyph is displayed using anassociated font, if found from the Windows registry.

Note: Font linking is not available for UNIX®.

These enhancements greatly benefit customers using Chinese, Japanese, orKorean (CJK) characters.

• Other enhancements include:

– Enhanced angle designation when sketching a line

– Enhanced Line Normal to Curve command

2D Layout for 3D Design (LO1)

• Section and auxiliary view callouts: Within a 3D master process, this functionenables you to natively get a normalized representation of callouts in layouts,rather than in drawings only. Callout representations corresponding to auxiliaryviews, section views, section cuts and multi-plane section views can be added toexisting design views. This can be done while creating such views or afterwards,using the same styles and properties as the drafting callouts that are created indrawings when generating the corresponding layout view.

• Multi-plane section views: Offset and aligned section views or section cutscan be created in layouts, rather than in drawings only. Such multi-plane viewscan be created either from an FTA view or capture or from a polyline located inan existing layout view. In offset section views, parts are cut by several parallelstaggered planes, to display a hole silhouette in a cylinder head for instance.In aligned section views, the part is cut by secant planes and is drawn as if thiscutting surface was unfolded. The 3D model is displayed according to the cuttingprofile, using 2D layout view filters to insure proper display of both 3D geometry



and annotations. Boundary objects can be created and edited to obtain therelevant display of cutting profile corners in the multi-plane view. These multi-plane views can be generated to drawings.

• New DS ISO 1 open type font and its related XML standard file: The DSISO 1 open type font helps represent annotations in a way that suits the variousISO norms for defining text representation (IS open type O 3098 norms). Thiscapability enhances the level of compliancy with both ISO and JIS norms whendrawings contain annotations that include western characters. It is also makes iteasier to make sure that any partner will be able to display such drawings in anidentical way on their machine without the need for exchange and installation of aspecific font because DS ISO 1 is provided by default.

• Direct import of DXF and DWG files and V4 Draw data into an existinglayout: DXF and DWG file content can now be directly imported into a layoutwithout going through a drawing. The same level of functionality as for DXF andDWG file import into a drawing is provided. This insures a faster path for movingto a 2D-3D approach while performing such tasks as conceptual design and plantlayout reusing legacy, supplier, or customer data.




Note: Font linking is not available for UNIX.


• View geometry upgrade: This function allows you to benefit from state-of-theart geometry creation and editing performance on previously created views byselectively upgrading the definition of 2D geometry to the current CATIA releaselevel. For example, geometry shape might be modified by upgrade process,while other features (annotations, dimensions, and dress-up) are not upgraded.Because upgrade availability is administrated through a dedicated option, accessshould be granted only to experienced users or administrators.

• Default rendering style: A new option lets you set the default rendering styleto be applied when creating a new layout. This rendering style is then storedwithin the created layout to insure consistency of the display when exchangedwith suppliers or other external users.

• Other enhancements include:

– 3D Output command improvements

– End points management when exporting geometry to the layout view

– Enhanced angle designation when sketching a line

– A hide option for 3D status in the specification tree

– View orientation improvements

– Improvements to the Line Normal to Curve command

CATIA - Structure Design 1 (SR1)

• Extrapolation offset for the Nibbling command: This enhancement adds theability to specify an extrapolation offset at creation, providing the capability offilling the gap of 5mm between operating and operated nibbling elements.

• Piece Part command: Extrapolation offset support is added for Nibbling,providing better control over the result.

• SDNF Import/Export command: This enhancement supplies the capabilityto export structure information into a neutral file format called a steel detailingneutral file (SDNF). SDNF is designed to be expandable to meet future needs andcapabilities. All information in the file is in ASCII format and is structured intopackets of information. It also provides the capability to import a valid SDNF file



with structure information and to use it to create structures under a specifiedproduct.

CATIA - Tooling Design 1 (TG1)

• Insert component keep as reference: For some tooling parts that do notneed to be edited, you now have the option to directly manipulate the catalogreference of the part. This improvement eliminates the need to perform a NewFrom operation.

• Drawing with mold conventions: Even if a tooling element includes part ofthe definition of the hole it creates in an impacted part, the rest of this definitiondepends on how this element is inserted into the molded part. This informationis processed and taken into account during drawing generation to produce moreaccurate mold drawings.

• Catalog upgrade: Catalogs are updated based on the most recent supplierreferences. In CATIA V5R20, components are added to the Mold Tooling Designcatalogs.

– To the catalogs of standard components:

-- 27 new components from Futaba

-- 189 new components from Misumi

-- 33 components from LKM

– To the catalog of mold bases:

-- 36 mold bases from LKM

-- Four mold bases from Futaba

-- One mold base from Hasco


CATIA - Generative Shape Design 1 (GS1)

• Isolation of Generative Shape Design (GSD) features: You can now isolateany GSD feature. Isolating a feature breaks any links with its inputs so thatthe feature becomes a datum feature that cannot be updated. This productivityenhancement eliminates the need to copy the geometry of the feature and replacethe feature with its copy.

• Offset: The Offset command is enhanced to improve the accuracy of errordiagnosis by indicating why an offset failed. The command now identifies errorseverity on immersive flags, gives the exact locations of immersive flags, and usesthe surfacic curvature function to perform a temporary analysis. This improvementhelps you to quickly isolate problems with input surfaces.

• Dynamic sectioning: This new command allows you to cut a part at a positionchosen dynamically by moving a 3D section directly in the 3D viewer. This functioncan be useful during the design process itself, to visualize the part being designedby section, or at review time, to detect potential section issues.

• Repetition GSD mechanism: This release adds a relative mode for the creationof repetition features. It allows you to create repeated features in an absolute(existing) or relative (new) mode. You can create repeated features relatively sothat every repeated feature refers to the parameters of the previously createdfeature.

• Repetition GSD mechanism with datum mode on: This enhancement addsthe capability of using the repetition mechanism with the datum mode on. It letsyou use the Repeat after OK command with the datum mode on, increasing theusability of the command.

• Point on curve along a direction: This new option in the Point commandenables you to create a point on a curve along a direction and an offset distance(in the direction specified).

• Multiselection mechanism enhancement: Enhancements to the data modelfor the MultiSel mechanism lets you aggregate all the common features of themultiselection function directly on the generated MultiOutPut feature. It applies toall classic CATIA behaviors, such as parent-child, historical graph, and copy-paste.This enhancement makes the multiselection data model clearer.



• Integration of FTA elements selection in 2D mode: This enhancement to the2D mode architecture enables you to select non-geometrical elements such as FTAas support. You can now select a 3D annotation, such as text or a flag note, as aninput plane to the 2D mode.

• Extrude and cylinder--mirror extent: This enhancement provides a checkbutton on the Extrude, Volume Extrude, and Cylinder panels. When selected,it allows you to create mirrored (symmetrical about the input profile) extrudedvolumes or extruded cylinder features.

• Conic--parabolic result preference option (same as CATIA V4): A newparabolic result preference option in the Conic command lets you get the samedefault result computation as in CATIA V4. The new Default Parabolic Resultcheck button is checked by default to give the V5 result. It must be unchecked togive the V4 result.

• Axis systems filter in parameterization analysis: This enhancement providesthe ability to find the current axis system quickly and easily through a filter. Itshows the current axis system in a different (orange) color, similar to the currentdisplay in the specification tree.

• Copy Paste as Result with colors: The Copy Paste as Result command nowtransfers inherited colors.

• Instantiate from Selection in multiselection mode: The Instantiate fromSelection command can now be used in multiselection mode for part designfeatures and for choosing new inputs.

• Reorder and drag and drop with branch change: Features can now be movedfrom an ordered root set to another ordered root set with the Drag and Drop orReorder command.

• Fillet--blend corner robustness: It is now possible to define a blend corner witha setback that exceeds the initial edge.

Real Time Rendering 1

Settings for knowledge update: This release adds a setting to enable update ofthe material knowledge parameter after a power copy operation.

Analysis

CATIA - Generative Part Structural Analysis (GP1)

• Elfini batch computations in ENOVIA: This enhancement is an extension of theCATUtil/AnalysisBatchUpdate capability that is currently available for files storedoutside ENOVIA. A CATAnalysis that is ready to compute on an ENOVIA server cannow be updated in batch mode.

• Animation of images across analysis cases: This enhancement allows you todo comparisons of a model under various load conditions in animation mode.

• Automatic naming: The ability to automatically name mesh parts (Tools-Options-Analysis), as introduced in Release 19, is enhanced to include theproduct name in the mesh part name for better identification.

Infrastructure

CATIA - STEP Core Interface 1 (ST1)

This release adds support for

• Sharp points on edges in STEP COPS Validation properties

• Exporting STEP nested assemblies

• FTA data in STEP exchanges



Enhanced CATIA P2 products

For P2 products with P1 counterparts, only enhancements that are in addition tothose described for the P1 product are included here.

Mechanical Design

Part Design 2 (PDG)

• Intersection edge fillet: This release offers an additional Intersection AgainstSelected Features definition mode. When you want to create a fillet betweenfeatures, you can define two lists of features by selection. The fillet will run on theintersection edges that run between these two lists.

• Edge, variable, and chordal fillet: This enhancement increases blend cornerrobustness. In tangency mode, the tangentially continuous edges of the selectededge are now managed to ensure better fillet stability and robustness. Productivityis improved because more fillets are automatically rerouted in response to designchanges. During the creation of a blend corner, concurrent edges are added inthe list of objects to fillet based on a propagation computation. This solves thechallenge posed by small sub-edges that cannot be selected easily. Consequently,a setback distance can be defined along a concurrent edge that is larger than theinitial edge first selected.

• Hole: When choosing a new standard table for the thread description of a hole,you are warned if the choice changes the diameter value.

• Threaded hole: The search in the standard file has been enhanced. If the holehas no standard, the search is done relative to the main diameter hole value. Ifthe hole already has a standard, the search is done relative to the previous threaddiameter value.

• Dynamic sectioning: A new command lets you section (display) a part.

• Enhanced angle designation when sketching a line

• Default chamfer command: You can now specify the definition mode to beactivated by default in the Chamfer command.

• Sketcher offset toolbar: The same offset toolbar used in the Interactive Draftingand 2D Layout for 3D Design products is now available in Part Design.

• Line Normal to Curve improvement:Line Normal to Curve now allows selectionof an existing point on the curve and gives access to a symmetry mode, as in thestandard line creation command. This avoids curve shape or position modification.

CATIA - Functional Molded Parts 2 (FMP)

• Intersection fillets: This release improves intersection fillet stability bycomputing them at the minimal intersection level. More modifications on previousfeatures can occur with no failure on intersection fillet definition and computation.

• Local Work: This command, similar to the Define in Work command, allows youto work locally in a simplified context, such as a sub-part of the part, by selectinga functional set or a list of features. It reduces the impact of part complexity.

• Visualization and selection of protected, internal, and core: An option isprovided to quickly get a global idea of which zone is protected among the 3Ddefinitions. Similarly added or subtracted zones can be highlighted and selecteddirectly in the geometry, enabling the 3D definition to support an easy design.

• Usability The usability of FMP capabilities is enhanced in this release.

• Flange command performance - preview management: Management ofthe Preview button in the flange creation and editing commands is handleddifferently to improve the performance of these commands.

• Thickness as a local modifier

• Dynamic sectioning: A new command lets you section (display) a part.

• Wall thickness analysis - section and thread management Even thoughthread definition does not generate geometry, the CATIA wall thickness analysisfunction can optionally take into account existing thread and tap features in orderto measure real material thickness. Moreover, because you can section geometry,you can store sections dynamically in the Wall Thickness Analysis command in



order to save critical zones and to get quick access to them. Sections can be usedfor review during design, thanks to their status, comment, and thickness values.

CATIA - Cast & Forged Part Optimizer 2 (CFO)

• Section and thread management: Even though thread definition does notgenerate geometry, the CATIA wall thickness analysis function can optionally takeinto account existing thread and tap features in order to measure real materialthickness. Moreover, because you can section geometry, you can store sectionsdynamically in the Wall Thickness Analysis command in order to save critical zonesand to get quick access to them. Sections can be used for review during design,thanks to their status, comment, and thickness values.

• Wall thickness analysis: This release adds support for a volume attribute in theWall Thickness Analysis command.

CATIA - Generative Drafting 2 (GDR)

• Section callout arrow thickness: You can now specify the thickness of sectioncallout arrows to enable compliancy with American standards (ASME/ANSI).

• Advanced bill of material: Support for user-defined product attributes is added.This enhancement enables you to extract from the bill of material not only thepredefined CATIA attributes of products, but also the attributes added by usersthrough Other Properties.

• Integration of wireframe and associative graphic dress-up in approximateviews: Points, wireframes, and associative graphic dress-up can now be projectedin approximate views.

• Associative dress-up: This release integrates digital process for manufacturing(DPM) machining states.

• Offset constraints on section profiles

• Detail callout arrow orientation compliance to standards This enhancementchanges arrow orientation so that the default orientation is compliant withinternational standards.

• Approximate view update status independent of file operations: Forperformance purposes, the current behavior of the update status is based on thefile time stamp. With this release, you can choose to use the pre-V5.16 algorithm,which is based on the CATIA internal time stamp. Using this algorithm willmaintain the view up-to-date when 3D files are re-saved without modifications.

• Persistency of GVS during updates: This behavior guarantees that the viewupdate is independent from the Tools-Options values. Changing the Prevent GVSoption no longer changes the result of the view update.

CATIA - Functional Tolerancing & Annotation 2 (FTA)

• Disable automatic mirroring: A new option is available to disable the automaticmirroring of annotations when displaying a capture.

• Geometry connection management: This enhancement produces a geometric3D display for deleted geometric components to help you to perform manualreroutes.

• Individual deletion of FTA result feature: FTA results can be deletedindividually. This feature lets you remove one or more FTA result features. FTAresult features are light features that are dedicated to review purposes andare not editable. They are generated by multi-CAD applications or by exportingV6 products and 3D shape representations to CATIA CATProduct and CATPartdocuments using the downward compatibility tool. This capability supports long-term archiving using STEP.

• Additional values for general tolerancing: This enhancement lets youcustomize the general tolerance values that can be set for dimensions.

• Runout creation on revolute surfaces: The runout tolerance feature framemust be created using the FTA tolerance advisor because the METROLOG softwarecannot recognize the tolerance setting without the rules-based advisor.

• Global copy of annotation sets: This capability allows you to reuse annotationset specifications and presentations of a part representation by completeduplication into another part representation that is a variant of the first one. The



copied annotations are automatically rerouted to geometric elements that havethe exact same geometric characteristics as those in the original part.

• Construction geometry enhancements: This release adds support for:

– Intersection circle between a plane and a cone (being perpendicular to theplane)

– Intersection circle between a cylinder and a cone (being coaxial with thecylinder)

– Intersection circle between 2 cones (being coaxial)

• Reorder of FTA captures, views, datums, and datum targets in thespecification tree: This enhancement provides the ability to organize viewsand captures in a consistent manner to ensure configuration consistency fordownstream use.

• Default annotations: You can now specify the radius size value to be used forthe automatic selection of fillet faces.

• Option to propose by default the All feature type within the tolerancingadvisor

• Text, flag note, and NOA creation on high-level geometric features: Text,flag notes, and NOAs can now be created on a variety of part design features:

– Axis systems

– Geometrical sets

– Bodies

– User features

– Technological result features

– Pads and pockets

– Shafts and grooves

– Ribs

– Holes

• Clipping plane: Support is added for offset/aligned section view/cut. If theactive view is a component of an Aligned/Offset Section Cut/View feature, thecorresponding 3D Aligned/Offset clipping is displayed.

• Part instance management within captures belonging to an assemblyannotation set: This release adds the ability to manage the show/no-show ofexternal part instances (and product black boxes to which an ARM part is applied)from the capture (assembly annotation set captures).

• Selection propagation for a pattern of threads: This function increasesproductivity by automatically selecting all constructed thread geometries in apattern for annotation creation.

• Automatic creation of framed (basic) dimensions for geometricaltolerances applied to threads or patterns of threads: You can automaticallycreate cylindrical coordinate framed (basic) dimensions for geometrical tolerancesapplied to a thread or pattern of threads. The created framed (basic) dimensionscompletely define the theoretical positions of tolerance zones of geometrictolerances according to ISO and ASME standards.

• Display view: This capability provides an optimal context for checking a view.Only the annotations associated with the view are displayed. The window isanimated to turn the view parallel to the screen with the X axis on the horizontal.The selected view is activated.

• Support for offset/aligned 3D clipping (CGR and 3DXML): This enhancementprovides a way to clearly display both the geometry of several inside features andtheir 3D corresponding annotations at the same time by cutting the geometry ofthe part or of the product following a section profile. The available views are madeup with offset section views, offset section cuts, aligned section views, or alignedsection cuts.

• New DS ISO 1 open type font and its related XML standard file: The DSISO 1 open type font helps represent annotations in a way that suits the variousISO norms for defining text representation (IS open type O 3098 norms). Thiscapability enhances the level of compliancy with both ISO and JIS norms whendrawings contain annotations that include western characters. It is also makes it



easier to make sure that any partner will be able to display such drawings in anidentical way on their machine without the need for exchange and installation of aspecific font because DS ISO 1 is provided by default.




Note: Font linking is not available for UNIX.


• Other enhancements include

– A new annotation and construction geometry display analysis option

– The ability to create a chamfer dimension within the tolerancing advisor

– An option to always attach an FTA annotation to the first selected geometricelement

– The ability to display and set the current capture

– Improved view orientation management

– Support for show/no-show of generative shapes and bodies when displayingcaptures (CGR and 3DXML)

– Support of feature cross-highlighting for text, flag notes, and NOAs applied tohigh-level geometric features (CGR and 3DXML)

– Improved cross-highlighting management of manual construction geometry

– An option to create FTA annotations at the Z=0 coordinate in front and sectionviews

– An option to propose the last created tolerance values for semantic tolerancecreation

– Support for cross-highlighting tolerance schema applied to a group of features(CGR, VISU mode, and 3DXML)

– Automatic tolerancing of user features

CATIA - Mold Tooling Design 2 (MTD)

Enhancements are the same as for Tooling Design 1 (TG1).

CATIA - Core & Cavity Design 2 (CCV)

• Wall thickness analysis and CATIA Mold Offering: The Wall ThicknessAnalysis command analyzes and provides a graphical feedback of the thickness ofa part. This command is added to the Core & Cavity Design workbench in the CMOcontext. CMO packaging applications are required to access the wall thicknessanalysis capability. This enhancement represents a high value in optimization andcycle time for customer.

• Quick split and color wizard: Quick dispatch is an enhancement of the MainPulling Direction command. It lets you automatically compute the core andcavity separation and to define the color of sets of faces for tooling. Faces aretransferred in the right area, based on their "neighborhood," to compute two mainareas: core and cavity.

Face Color Editor is a new command of the Core & Cavity Design workbench. Itlets you change the color of different groups of faces and to create a selection setfrom them so they can be selected in one operation. This optimization reducescycle time and greatly improves productivity.

• Add Middle Point command: The Middle Point command is added to the Core &Cavity Design workbench.



CATIA - Sheetmetal Design 2 (SMD)

These enhancements are in addition to those for CATIA - Sheetmetal Design 1(SM1).

• Chamfer recognition: The feature recognition function now recognizes chamfers.

• Bend from flat: The Bend from Flat option adds bend tangent line (BTL) support.This enhancement makes it possible for you to keep the same defined length for apart that bends while being folded

• Improved quality of a bend refold impacted by a stamp: This functionenables you to make a partial fold or unfold on stamping faces.

• Wall-on-edge propagation: To define a wall-on-edge feature, you canselect several edges that will generate several folds. Folds and their tips areautomatically re-limited according to a minimum gap value between them.

• Conical bend recognition: In addition to prismatic shapes, bends can get aconical shape.

• Automatic cutout for tubes: This enhancement lets you create a single cutoutthat allows a cylinder to cross through a sheetmetal part. The cutting profile is theminimum ellipse, which contains ellipses corresponding to top and bottom skins.To establish a gap between the cylinder and the cutting part, you can specifythe split tolerance. The major and minor radius of the minimum ellipse would beenlarged by a split tolerance.

• Advanced cutout impacting planar and cylindrical faces

• User stamp on both sides: In addition to improving the user interface, thisoption allows you to create stamps in two opposite directions in a single operation.

• Fillet on cross-shaped beads: When a bead feature gets the shape of a cross,this option enables you to round the edges with a specific radius on the cross.

• Flange with plane specified as support: The flange feature can be positionedaccording to a support plane to easily take the design context into account.

CATIA - Composites Engineering 2 (CPE)

• Merge several composites parts into one: Several composites parts can besplit among several designers and then merged back into one composites part,enabling concurrent engineering. All of the technical information about compositestacking is merged, and adjacent plies can be merged into one.

• Generation of manufacturing part as result: Creation and synchronization of amanufacturing part with a contour in the as result mode fosters performance andreliability improvements. Moreover, it ensures that manufacturing and engineeringparts are exactly the same. This enhancement facilitates the transfer from thedesign office to the manufacturing shop floor.

• Material addition on a ply for automated processes (bird beak and batears): The new composites material addition function makes it easier to selectjunction lines in the isothickness area (ITA) process.

• Performance improvement in manufacturing part generation Productivityfor composites designers is enhanced by optimizing algorithms in the collaborativeengine to speed-up manufacturing part generation.

• Assist junction lines creation for generation of a solid from an ITA: Likematerial addition, this enhancement makes it easier to select junction lines in theITA process.

• Splicing process improvement: This improvement creates a system that letsyou define splicing specification features that can be selected and modified whencreating splice zones or when using 3D multi-splice. When splicing is defined in 3D(2D) it provokes a deviation during unfold. It is now defined in the unfold mode(on the flattened view) to avoid this deviation and to ensure that fibers will not becut in the flattening process.

• Composites in an assembly context in the grid design process: This newprocess allows you to design a composites part using a grid in the assemblycontext. The design of large composites parts (aerospace barrels or turbine wings,for instance) can be processed in an assembly context with their mating structuralelements. These structural elements, such as stiffeners, stringers, or frames,are taken into account through their footprints as displayed on a grid panel.



The grid definition also includes staggering data and thickness laws or stackingsequences. The ply stacking can be controlled in a virtual representation by themanagement of cells and of the ply order, and it can be compared to the originalgrid requirement. The plies are then generated from the grid with automaticmanagement for stacking and staggering. You can manage the ply drop-offthrough patterns or through manual modifications. A specific ramp curve can beimposed as a route to the contours of a set of plies. Other ply optimizations, suchas angle cut, merge, and symmetry, are available.

• Generation of composites parts by solid slicing: With the solid design, youcan define the plies of a composites part from zones with an imposed heightfrom the reference surface. The solid creation is improved for greater precision,especially when defining the drop-off features to complete the global shape of thesolid. The solid is sliced in order to obtain contours, and the plies are generatedfrom these contours so that they are associative with every previous definitionfeature.

CATIA - Composites Design for Manufacturing 2 (CPM)

The following are in addition to the enhancements to CATIA - CompositesEngineering 2 (CPE).

• Skin swapping - wrap curve mode This release offers a new skin swappingmode that uses wrap curve (shape morphing) technology.

• Skin swapping - unfold mode With the unfold mode, one or several plies canbe developed on the manufacturing surface during the drape forming process,provided the mold surface is flat. This mode enables designers to take intoaccount the manufacturing process when creating parts requiring a zone slicingapproach, such as spars, stringers, stretchers or stiffeners with U, I, or C shapes.This simulation capability increases producibility because it visualizes the deviationconstraints of the fibers relative to perpendicularity.


CATIA - Imagine & Shape 2 (IMA)

• Subdivision command enhancements: This release adds new functions tothe subdivision Extrude and Revolve commands to extend their use and improveproductivity.

• Alignment of points along any geometry: The Alignment command alignsvertices on a plane or a line defined by the compass. Enhancements to thecommand extend the possible supports of projection by providing a way to projectsome points of the base mesh onto any kind of geometry. This gives you thefreedom to use styled geometry as input to the design process.

• Creation of subdivision instances: This new command offers the ability tocreate one or more instances of any existing subdivision feature. The instance canbe a subdivision surface or any kind of subdivision feature, such as symmetry,revolution, and extrusion. After creating the instance, you can move it freely androtate it in an easy way. Numerous products contain many repetitive pieces, suchas pearls in a necklace or the four wheel rims on a car. Imagine & Shape nowaddresses the creation of these types of repetitive pieces with an easy-to-usesolution that is fully integrated with the Imagine & Shape workbench.

• Subdivision net from a set of curves: This new capability creates a subdivisionsurface by filling a network of curves using net surface technology.

• Modeling under draft angle constraint: Shapes are now automaticallymodified to respect draft angle constraints.

• Subdivision divided by plane: You can extract parts from a subdivisioninteractively using an interactive plane manipulator.

• Face cutting manual mode: This new option in the Face Cut command lets youcreate a cut at the picking point and then manually adjust the final location of thecut.

CATIA - Digitized Shape Editor 2 (DSE)

• Associative Curve Discretization: The Curve Discretization command is now afeature, bringing associativity to curve discretization to increase productivity. It



is now possible to replace a curve with a new update. The curve discretization isautomatically refreshed.

• Drafting integration - mesh section in exact mode: This enhancement allowsyou to:

– Generate drafting views and section cuts of meshes in the exact mode

– Experience better reliability and performance compared to the approximatemode

– Draw sections along polylines, which are either interactively drawn or stored ina sketch

• Import and export improvements

– The Import command now supports the GoCad and HGT formats, which can beapplied to terrain modeling.

– You can now export scans with the ability to define and customize the outputformat.

CATIA - Quick Surface Reconstruction (QSR)

• Automatic surface associativity: The QSR workbench provides a fullyautomatic command for quickly building surfaces fitted on meshes. The AutomaticSurface Reconstruction command is now associative. This enables interactiveediting and automatic update of the surface in case of input mesh modification orreplacement, increasing productivity.

• Mesh selection and propagation for surface creation: This new functionmakes it easier for you to select meshes. They can now quickly select plane areason meshes. Additionally, within the Activate command, flooding can be achievedwith an angle criterion, and in the PowerFit command, you can activate a sub-partof a mesh to avoid counter-draft treatment during the approximation.

• Curve projection on a mesh: A new option in the Curve projection dialog boximplements the same behavior as Generative Shape Design command. The dialogbox is modified with a new Nearest option. If the nearest option is checked, thebehavior is the same as before. The Nearest option can be unchecked only if youproject a curve along a direction on a mesh. If the Nearest option is unchecked,the curve is extruded along the projection direction. The resulting scan is theintersection between the mesh and this extrusion.

• Geometric tolerances checker: A new Geometric Tolerancing Checkercommand allows you to check easily, quickly, and automatically if a digitizedobject (as manufactured) respects the geometric dimensioning and tolerancing(GD&T) of a numerical mock-up (as designed).

• Drafting integration--mesh section in exact mode: This development letsyou:




CATIA - Shape Sculptor 2 (DSS)

• Associativity in mesh operators: This release implements associativity forselected functions. The Mesh Morphing command is now a feature, bringingassociativity and high productivity. It is now possible to replace the mesh witha new update. Mesh morphing is automatically refreshed. This also makes thetessellation function available in the Boolean Operations command (stackingcommands).

• Drafting integration--mesh section in exact mode This development allowsyou to:






• Import and export improvements

– The Import command now supports the GoCad and HGT formats, which can beapplied to terrain modeling.

– You can now export scans with the ability to define and customize the outputformat.

• Removal of the oldACA(Automotive Class A) command from reverseengineering workbenches: The Highlights command is replaced by theIsophotes Mapping command in the Shape Sculptor workbench.

CATIA - Freestyle Shaper 2 (FSS)

• Shape creation: It is now possible to control the styling fillet with greaterprecision.

– The dialog box is redesigned.

– The Furtive Display command is enhanced (only the ribbon is taken intoaccount).

– A new support for fictive edges is introduced (no real intersection betweensupports is needed).

– Multi-result management (as in Generative Shape Design) is added.

• Shape modification: Shape modification offers many enhancements to thecontrol points function, the Extend command, and the styling Extrapolatecommand. The break creation process is also made easier, with more possibilitiesfor the creation of the datum feature that will save you time. Evolution of theMatching Constraint command adds functions to improve productivity.

• Analysis: This release delivers new capabilities for the Dress-up, SurfacicCurvature, Highlights, and Connect Checker commands. It also offers newenhancements enabling you to select multiple elements under the geometricalset as input to the Cutting Plane command in one step. A new Mirror Analysiscommand can apply symmetry to geometrical elements and freestyle analysis.

• Compass management tools: This enhancement implements a new commandto orientate the compass. It lets you create an axis system from the compasslocation in 3D. It also lets you set the compass to the mean or the trace plane asthe requirement arises, affording more flexibility in creating elements in 3D.

CATIA - Generative Shape Design 2 (GSD)

These enhancements are in addition to those for CATIA - Generative Shape Design 1(GS1).

• Parallel curve--repetition with two parameters: This enhancement adds theability to use the repetition function for two parameters (linear or S-type law) forparallel curves defined with two parameters.

• Fillet--blend corner robustness: In tangency mode, the tangentially continuousedges of the selected edge are now managed to ensure better fillet stabilityand robustness. Productivity is improved because more fillets are automaticallyrerouted in response to design changes.

Photo Studio 2 (PHS)

This release adds the ability to render round corners and round edges on a part thathas no filet, dramatically decreasing the number of triangles needed to obtain thesame rendering quality.

Product Synthesis

Human Builder 2 (HBR)

This release adds new reach envelopes and a default German population.



Equipment and Systems Engineering

CATIA - Electrical Library 2 (ELB)

New CAA APIs provide device connect and disconnect functions.

CATIA - Electrical Harness Installation (EHI)

Ergonomics and user productivity

• Filter device list: There are now several ways to filter and sort the device list toshow the harness defined for each device.

• Preview in Add Support command: You can now preview the result of the AddSupport command to allow editing of the input before running the command.

• Enhancement of the Local Slack command: A new setting in Tools-Optionscalled Display Slack for all Bundles allows you to see where slack has beenadded in the entire harness, for all the portions of branches in session, when thecommand is activated. It is no longer necessary to do it branch-by-branch usingthe Route Definition command. The new setting supplies a quick and global viewof the places where slack is added along the whole harness.

New capability--floating branch points: A new command is available to modifythe position of a 3D point to which two branches are routed to put it at a "natural"position.

Improved functions

• Enhancement for bend radius ratio usage: The branchable now has two newattributes:

– The Creation Mode attribute

– The Bend Radius Ratio attribute.

These two attributes complement each other and provide improved informationabout the branch, especially when the branch is created using the Bend RadiusRatio button. These new attributes:

– Enable every branch to retain the information about the bend radius ratio valueset for its curve

– While performing wire routings, can be used and respected to re-compute thebranch diameter and bend radius appropriately

– While editing multiple branchables using the Branch Definition command, can beused to invoke the bend radius ratio value of the branchable

• Using AlgoType for electrical curve updates: A branch created with aparticular segment computation setting in Tools-Options-Equipment-WireHarness Assembly Design-Harness Management (standard or FLEXalgorithm) will have its electrical curve built/updated with the same algorithmthroughout its life cycle. Switching from one algorithm Tools-Options setting toanother has no impact on the geometry of the existing electrical curves. The curvewill be updated (without any changes to its shape) based on its internal AlgoTypeattribute value.

• Migration of supports from V4 to V5: You can now import V4 supports sharedby multiple harnesses by improving the position in the tree of the support in theimported harness structure.

• CAA APIs: CAA APIs have been added to add a support in a branch.

CATIA - Electrical Harness Flattening 2 (EHF)

Synchronization of knowledge parameters on bundle segments: Thisenhancement allows you manage knowledge parameters on bundle segments bycopying the knowledge parameters from the 3D design to 3D flattened harness andthen updating the value of the parameters during the synchronization process.



CATIA - Structure Functional Design 2 (SFD)

• Small Assemblies preview: This enhancement improves the usability of theSmall Assemblies command by providing a better preview. It displays the limitand support tags and provides capabilities to invert limits and supports usingmanipulators.

• New options for mesh generation: With this enhancement, you can obtainmore control over finite element modeling parameters. It also offers new optionsto control the quality and the accuracy of the generated mesh.

• Slot graphic replacement: A slot is now represented by a cross sign. The size ofthe cross sign is inherited from the height and width of the slot object. Differenttypes of slots can be identified on the drawing by numbering.

CATIA - Ship Structure Detailed Design (SDD)

• Small Assemblies preview: This enhancement improves the usability of theSmall Assemblies command by providing a better preview. It displays the limitand support tags and provides capabilities to invert limits and supports usingmanipulators.

• Face Plate command enhancement: The Face Plate command is enhancedso that it can reuse the modified trace offset values (stiffener on free edge,SFE) or anchor point offset values (face plate) for subsequent SFE or face platedefinitions, respectively.

Analysis

CATIA - Generative Part Structural Analysis 2 (GPS)

• Elfini batch computations in ENOVIA: This extends the CATUtil/AnalysisBatchUpdate capability that is currently available for files stored outsideof ENOVIA. CATAnalysis can now run on an ENOVIA server and can be updated inbatch mode.

• Animation of images across analysis cases: This enhancement allowscomparison of a model under various conditions of loading within the animationmode.

• Improvement in automatic naming: In the Tools-Options-Analysis menu,an option is available to automatically name mesh parts, properties, and groups.In Release 20, this function is enhanced to include the product name in the meshpart name for better identification.

CATIA - Generative Dynamic Response Analysis 2 (GDY)

Display and animation of complex values: This release improves overallinterpretation and visualization of complex results.

• Complex values are now extracted from results after all combination and filteringoperations are completed, diminishing the introduction of numerical errors duringprocessing.

• You can now visualize the results at a given phase (modulus with phase).

• Animations of complex values now take the phase into account.

Machining

CATIA - NC Manufacturing Review 2 (NCG)

• Reverse machining consistency Reverse machining is now supported for allmilling operations. A new option allows you to flag the milling operation nameto require notification when the machining operation condition is reversed. Youcan unlock the tool path and proceed with reversing the machining condition of amachining operation.

• Tool query without tool type: The Tool Query panel now has an option to queryall the applicable tools for a machining operation.



• Autosequence improvement: A new rule to minimize tool changes is nowavailable. Autosequence performance is significantly improved with a new sortingalgorithm.

• Collision checking with user representation: When performed at the toolpath replay level, collision checking now takes the user representation of the toolassembly into account.

• Management of direction during machining process instantiation: Withthis enhancement, you can instantiate a machining process by taking into accounteither the absolute or current axis system that is assigned to a machining axissystem change for the machining direction.

CATIA - Prismatic Machining Preparation Assistant 2 (MPA)

• Parameter reuse: User parameters defined at the technical result level can nowbe included in the created machinable axial feature and reused

– In formula and checks when defining a machining process.

– As user criteria in pattern creation. You can group holes having the sameselected user parameter value in the same pattern. The USERPARAM value isautomatically included in the pattern name.

This capability delivers a breakthrough with major opportunities to customizesoftware behavior and improve productivity.

• New sort filter: You can now sort features using an axial features filter.

CATIA - Prismatic Machining 2 (PMG)

• Pocketing operation: This release adds the capability to machine pocket areaswithout a jump motion on check elements.

• Other enhancements include

– Multi-edit pocketing and axial operations

– Option to disable intermediate stock management at the operation level to forcethe compute

– Ability to select a bottom plane using a point derived from tool axis direction

– Ability to define a helix approach macro for circular milling

– Ability to specify at the operation level whether or not the tool is rotating

– Specification of a new operation for trochoidal movement and the definition of anew parameter to define trochoidal movement in roughing operations

CATIA - Lathe Machining 2 (LMG)

• Maximum spindle speed at the operation Level: This function lets you definethe maximum spindle speed at the machining operation level. (By default, thevalue is the maximum spindle speed set on the part operation). This setting isavailable for all turning and axial machining operations.

• Local offsets to the part profile in rough turning operations: Thisenhancement provides the local information function in the rough turningoperation. In addition to the global offsets that can be assigned to the part profile,local offset values can be added.

• Angular units (length per revolution) for air cutting feed rate: In additionto linear units (length per minute), the air cutting feed rate can now be specifiedin angular units (length per revolution).

• End limit option for grooving turning: This functionality helps to define theend limit on the profile geometry of single flank groove turning operation and alsoprovides an option for specifying end limit offset value. This helps to control thetool path on the open end of groove turning operations.

CATIA - Multi-slide Lathe Machining 2 (MLG)

You can now define tool path points based on the turret axis system of the machine.



CATIA - 3 Axis Surface Machining 2 (SMG)

• Allow a dedicated Cycle or Off statement for probing, lathe, and axial operations.

• Add an option for contour-driven operations to define the contour propagationstrategy and smooth the tool path.

• Control the tool axis vector on approach and retract on SMG-style operations.

• Add a new smoothing strategy to the 4-axis curve sweeping operation.

• Add an advanced finishing operation to provide an efficient way to machine anentire part or to rework a groove.

• Employ the slope area editor to edit a slope area by dividing it up into severalzones so that the zones can later be associated with different machiningoperations.

CATIA - Multi-Axis Surface Machining 2 (MMG)

CATIA V5.20 adds the ability to control the start point of spiral axis machining.

CATIA - Multi-Pocket Machining 2 (MPG)

This release introduces the Multi-Pocket Flank Contouring operation. This operationis dedicated to the machining of parts that have multiple pockets with an obviousview direction using the flank of the tool. This enhancement provides multi-pocketability and multi-axial and multi-radial strategies that can lead to reductions inprogramming time and the number of operations required.

CATIA - NC Machine Tool Simulation 2 (MSG)

• Stock colors can now be displayed based on the tool during simulation withintegrated material removal. This enhancement improves usability and promotesbetter process understanding and verification.

• Machine instruction support for interchangeable milling heads is added.

CATIA - STL Rapid Prototyping 2 (STL)

Drafting integration--mesh section in exact mode: This development allowsyou to:

• Generate drafting views and section cuts of meshes in the exact mode

• Experience better reliability and performance compared to the approximate mode

• Draw sections along polylines, which are either interactively drawn or stored in asketch

Infrastructure

CATIA - V4 Integration 2 (V4I)

V4 graphical dimensions are displayed with the same visualization as in V4. Thesefeatures cannot be modified in V5--only Delete is available.

CATIA Platform 3 (P3)

Mechanical Design

CATIA - Aerospace Sheetmetal Design 3 (ASL)

• Joggle enhancement request: This option lets you locate the extremity of thejoggle with respect to its joggle plane. Either the end radius extremity or the run-out extremity can be located exactly on the joggle plane.

• Surfacic flange re-limit: The surfacic flange re-limit is built from specifications(such as skins or wires) selected by the designer. If these specifications donot produce a closed wire on the surfacic flange support, specifications can beextrapolated or the boundary of the support skin can be used to ensure theclosure of the result.



CATIA - Composites Design 3 (CPD)

In addition to the enhancements for CATIA - Composites Design for Manufacturing 2(CPM), the splicing process is improved to create a system that allows you to definesplicing specification features that can be selected and modified when creating splicezones or when using 3D multi-splice. When splicing is defined in 3D (2D) it provokesa deviation during unfold. It is now defined in the unfold mode (in the flattenedview) to avoid this deviation and to insure that fibers will not be cut in the flatteningprocess.

Education support

CATIA Higher Education and Training (HEAT) program

Under the HEAT program, two configurations are available for qualifying institutionsto order CATIA V5:

CATIA - Academic Discover 2 Configuration (DIC)CATIA - Educational HEAT EAR 2 Configuration (EX2)

When new CATIA P1 or P2 products are announced, they are automatically added tothe EX2 configuration. When P1 or P2 products are withdrawn in a release, they arelikewise removed from the EX2 configuration. However, any CATIA products that areexport controlled and restricted from use in embargo/terrorist countries will not beadded to the EX2 configuration. These products are:

• CATIA Composites Engineering 2 (CPE)

• CATIA Composites Design for Manufacturing 2 (CPM)

• CATIA Ship Structure Detail Design 2 (SDD)

• CATIA Digital Product Rights Manager 1 (RM1)

If any removed product is needed, special handling must be requested. Fornon-embargo/terrorist countries, the approval will be automatic. For embargo/terrorist countries, the Export Control Office must be engaged. Contact your IBMrepresentative for further information.

These configurations are for academic customers only. Their use is restricted to non-business education and research activities. Models saved using these configurationsare flagged so that a message is displayed when there is an attempt to read such amodel with a non-academic (production) configuration.

To facilitate its use in the educational environment, a license for the CATIA UserCompanion for Academic Discover 2 Configuration (DLC) is included at no chargeunder the Enterprise Option model for each DIC seat ordered, and a license for theCATIA User Companion for Academic Learn Configuration (LLC) is included at nocharge for each EX2 seat ordered.

Technical information

Specified operating environment

Hardware requirements

Common hardware requirements

The following requirements are common to all operating systems supported by thisrelease. Platform-specific requirements are specified in subsequent topics below.

• Required components and features

– Disk drive: An internal or external disk drive (minimum recommended sizeis 4 GB) is required to store program executables, program data, the user



environment, and to supply paging space. Installation of all CATIA V5 productsrequires 2.0 GB on Microsoft Windows, 2.4 GB on AIX, and 2.3 GB on Solaris.

– Memory: 256 MB of RAM is the minimum recommended for all applications. 512MB of RAM is recommended for DMU applications on large assemblies and forthe Digitized Shape Editor 2 (DSE) product. Requirements may be greater whenlarge amounts of data are used.

– Internal/external drives: A CD-ROM drive is required for program installationand for access to the online documentation, which can optionally be downloadedto disk.

– Display: A graphics color display compatible with the selected platform-specificgraphics adapter. The minimum recommended size for usability reasons is 17inches. Minimum resolution for Windows workstations is 1024 x 768 and 1280x 1024 for UNIX workstations. When selecting a graphics adapter, hardwaretexturing capability is strongly recommended when using CATIA V5 productsthat use texture mapping, in which case the amount of texture RAM has to beadequate for the number and complexity of textures to be used.

– Keyboard: A specific keyboard compatible with the selected installation localemay be required for national language support.

– Pointing device: Three-button mouse. On Windows workstations, a two-button mouse may alternatively be used (the third button is emulated with akeyboard sequence). The three-button mouse is recommended for usabilityreasons. IntelliMouse (two buttons plus a wheel instead of the third button) isan alternative to the three-button mouse on Windows workstations. The wheelacts as the middle button to allow additional manipulations, such as panningand scrolling.

• Optional components and features: For CATIA P2 and P3, SpaceBall orSpaceMouse, in addition to the standard mouse, can be used to perform graphicmanipulations (zoom, pan, rotate). The required drivers are delivered with thesedevices. Support of these devices is also available with the DMU Navigator 1 andDMU Space Analysis 1 P1 products.

The robustness of the overall solution is dependent on the robustness of theoperating system and the hardware environment used. Windows XP and UNIXhardware configurations certified by Dassault Systemes for running CATIA V5products are published at

http://www.3ds.com/support/hardware-certification/overview/

Although CATIA V5 products might run on configurations or with graphic adaptersother than those specified for each of the platforms below, incidents specific to suchconfigurations or adapters will not be accepted for support.

Hardware requirements for Microsoft Windows XP

• System unit: An Intel® Pentium® 4 or Xeon® based workstation runningMicrosoft Windows XP Professional Edition SP2.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.

Note: Graphics performance on local transformations (panning, zooming, rotatingmodel) will depend on the selected graphics adapter. The graphics adapter shouldhave the following capabilities:

– 24-bits, true color, double buffered visual

– 24-bits, Z-buffer

– Stencil buffer

– Minimum supported resolution: 1024 x 768; a resolution of 1280 x 1024 isrecommended for usability reasons

• Network adapter: An active LAN adapter (Ethernet or Token Ring, installed andconfigured) is required for license key purposes.

http://www.3ds.com/support/hardware-certification/overview/



Hardware requirements for Microsoft Windows x86-64 64-bit

• System unit: An Intel Xeon EM64T or AMD Opteron 64-bit based workstationrunning Microsoft Windows XP Professional x64 Edition.

• Memory: 4 GB is the recommended minimum.

• Disk drive: 2.5 GB is the recommended minimum.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.

Note: Graphics performance on local transformations (panning, zooming, rotatingmodel) will depend on the selected graphics adapter. The graphics adapter shouldhave the following capabilities:

– 24-bits, true color, double buffered visual

– 24-bits, Z-buffer

– Stencil buffer

– Minimum supported resolution: 1024 x 768; a resolution of 1280 x 1024 isrecommended for usability reasons

• Network adapter: An active LAN adapter (Ethernet or Token Ring, installed andconfigured) is required for license key purposes.

Hardware requirements for IBM AIX

Note: Any future release will not support IBM AIX.

• System unit: Any IBM workstation that is POWER® processor-based and which issupported by AIX V6.1.

• Graphics adapter: One of the following graphics adapters is required.

– GXT4000P

– GXT4500P

– GXT6000P

– GXT6500P

Hardware requirements for Sun Solaris

Note: Any future release will not support Sun Solaris.

• System unit: Any Ultra1, Ultra2, Ultra10, Ultra30, Ultra60, Sun Blade 100, SunBlade 150, Sun Blade 1000, Sun Blade 1500, Sun Blade 1500+ (1.5 GHz), SunBlade 2000, or SunBlade 2500 workstation based on the UltraSPARC processorsupported on Solaris 10.

• Graphics adapter: One of the following graphics adapters is required.

– Creator3D

– Creator3D Series III

– Elite 3D (U10-440MHz only for U10 workstations)

– Elite 3D Lite

– Expert 3D

– XVR-500

– XVR-600

– XVR-1000

– XVR-1200

Software requirements

Important notices

• CATIA V5.20 does not support:

– IBM AIX V5.3

– Hewlett-Packard HP-UX



• Any future release will not support:

– Sun Solaris

– AIX

Refer to the Program Directory or contact your IBM Support Center for appropriatecorrective service to apply to the software described below.

Microsoft Windows XP 32-bit

Microsoft Windows XP Professional SP3. Microsoft Windows XP 32-bit delivers animplementation of OpenGL libraries. Dassault Systemes provides recommendationsrelated to driver levels based on certified configurations. These drivers may offera CATIA V5 application setting (see Control Panel, Display Properties tabs). Theseshould be selected when available because they may contain application-specificfeatures.

A localized version of the operating system may be required when the selectedinstallation locale differs from Latin 1.

Orbix 3.3 is required on 32-bit operating systems.

For a list of certified configurations, visit

http://www.3ds.com/support/hardware-certification/windows-certified-workstations/

Microsoft Windows Vista 32-bit

Microsoft Windows Vista x32 Enterprise and Business Edition SP1. Starting withWindows Vista, IPv6 is installed and activated by default. However, a dual IPv4and IPv6 layer is provided, and because V5 client-server communication does notsupport IPv6 in V5.20, it is recommended to deactivate IPv6 and use IPv4. Todeactivate IPv6, refer to the following Microsoft Technet article:

http://technet2.microsoft.com/windowsserver/en/library/cba5a7ac-742a-49a6-8212-3844c768a0f81033.mspx?mfr=true

See sections:

• To Uninstall IPv6 Using the Network Connections Folder

or

• To Uninstall IPv6 from a Computer from the Command Prompt

Note that this operation requires administrator credentials.



Microsoft Windows XP 64-bit

Microsoft Windows XP Professional x64 Edition SP2. Microsoft Windows XPProfessional x64 Edition delivers an implementation of Open GL libraries. DassaultSystemes provides recommendations related to driver levels based on certifiedconfigurations. These drivers may offer a CATIA V5 application settings (see ControlPanel, Display Properties tabs), which should be selected when available, as theymay contain application-specific features. When installing 32-bit applications, theywill be able to allocate up to 4GB of memory when running on the 64-bit operatingsystem.

Note: Memory consumption for a 64-bit process is completely different than fora 32-bit process. In this situation, it is not pertinent to compare the performancemonitor virtual bytes counter between a 32- and 64-bit process. Although the 4 GB









limitation of global address space make this counter important when tracking a 32-bit process, virtual address space for 64-bit process can go up to 8 TB.



Microsoft Windows Vista 64-bit

Microsoft Windows Vista x64 Enterprise and Business Edition SP1. Starting withWindows Vista, IPv6 is installed and activated by default. However, a dual IPv4and IPv6 layer is provided, and because V5 client-server communication does notsupport IPv6 in V5.20, it is recommended to deactivate IPv6 and use IPv4. Todeactivate IPv6, refer to the following Microsoft Technet article:


See sections:

• To Uninstall IPv6 Using the Network Connections Folder

or

• To Uninstall IPv6 from a Computer from the Command Prompt

Note that this operation requires administrator credentials.



AIX 32- and 64-bit platforms

AIX 6.1 Technical Level 02 (using 64-bit kernel) with following components:

• XL C/C++ V10.1.0.0 Run-time Environment (part of AIX 6.1 TL02)

• XL Fortran V12.1.0.0 Run-Time Environment (part of AIX 6.1 TL02)

• OpenGL 1.3 as delivered on the AIX CDs


http://www.3ds.com/support/hardware-certification/unix-certified-hardware

Sun Solaris

Solaris 10 HW 03/05 (SPARC).

Requirements for interoperability with ENOVIA VPLM products

• CATIA V5 and ENOVIA VPLM V5 must be at the same release, service pack, andhot fix level for proper interoperability.

• CATIA V5 and ENOVIA VPLM interoperability is supported between various CATIAV5 releases and ENOVIA VPLM PTF levels. Refer to the most recent ENOVIAVPLM PTF program directory for the current prerequisite and recommendedinteroperability PTFs.

Product-specific software requirements for CATIA P2

• CATIA - V4 Integration 2 (V4I) requires, on the CATIA V5 client, forinteroperability with CATIA V4 CDM and ENOVIA VPLM ENOVIAVPM:

– If the database server is DB2®, then on AIX, Microsoft Windows, or Solaris useDB2 UDB V8.2.4.







http://www.3ds.com/support/hardware-certification/unix-certified-hardware



– If the database server is Oracle, then on AIX, Microsoft Windows, or Solaris, useOracle 10gR2.

Note: Contact your IBM or Oracle representative for support and planninginformation on DB2 UDB or Oracle.

Notes

CATIA V4 CDM and ENOVIA VPLM ENOVIA VPM interoperability is availablethrough CATIA - V4 Integration 2 (V4I) for the following products:

– CATIA - Assembly Design 2 (ASD)

– CATIA - DMU Kinematics Simulator 2 (KIN)

• Interoperability of CATIA V5 on the supported Microsoft Windows platforms withENOVIA VPLM ENOVIAVPM through ENOVIA 3d com requires, on the client side,either (depending whether the database server is a DB2 or an Oracle server):

– DB2 Universal DatabaseTM V8.2.4 Client for Windows– Oracle Client Version 10gR2 for Windows

• Math Kernel Libraries - When on an Intel architecture in a Windows environment,the performance of the following products can be improved through the use ofIntel Math Kernel Libraries at level 6.0:

– CATIA - Generative Part Structural Analysis 1 (GP1)

– CATIA - Generative Part Structural Analysis 2 (GPS)

– CATIA - Generative Assembly Structural Analysis 2 (GAS)

– CATIA - ELFINI Structural Analysis 2 (EST)

– CATIA - Product Engineering Optimizer 2 (PEO)

– CATIA - Generative Dynamic Response Analysis 2 (GDY)

MKL Libraries at level 6.0 can be obtained from

http://software.intel.com/en-us/intel-mkl/

In a Windows XP x64 environment, MKL 8.0 or higher is recommended.

This requirement is optional. Refer to the Before you Begin section in theGenerative Structural Analysis User's Guide for additional information.

Access to product information

Product information is delivered with the product CDs in HTML format. An HTMLbrowser is required to access this documentation. Online documentation may beinstalled and used only in the same supported operating environments as CATIA V5.

• In a UNIX environment

For AIX - Firefox 2.0For SUN Solaris SPARC - FireFox 3.0

• In a Microsoft Windows environment, one of the following browsers is required:

Microsoft Internet Explorer at a minimum level of 7.0Firefox 3.0 (32-bit)

In addition to a Java-enabled Web browser, the JavaTM Plug-in at level 1.5 to searchonline documentation:

• For AIX, Java Runtime Environment version Java JRE 6 SR3 minimum, which canbe downloaded from

http://www.ibm.com/developerworks/java/jdk/aix/service.html• For Sun Solaris, Java Runtime Environment Version 6 Update 10 minimum, which

can be downloaded from

http://java.sun.com/products/archive/index.html

http://software.intel.com/en-us/intel-mkl/

http://www.ibm.com/developerworks/java/jdk/aix/service.html




• For Microsoft Windows, Version 6, Update 10 minimum, which can be downloadedfrom


Although access to the online documentation might work on other HTML browsers,incidents specific to browsers other than those specified are not eligible for support.

Prerequisites for the license management environment

Microsoft Windows workstations must have an active LAN card (Ethernet or tokenring) and TCP/IP installed and properly configured, even in the case of nodelockkeys, though for nodelock there is no need to have the workstations connected tothe network. No additional license management software is required when accessingnodelock license keys.

IBM License Use Management (LUM) is required to serve concurrent license keysacross a network. A LUM configuration file (i4ls.ini) is required on CATIA V5clients to access concurrent license keys from these servers. Server and Nodelocklicense management mechanisms are available for CATIA V5 P1, P2, and P3 on allsupported operating environments.

The minimum IBM LUM level is V4.6.8.3.

The latest release of IBM LUM, together with any applicable patches, can bedownloaded at no charge from

http://www.ibm.com/software/lum

For details about LUM license management for CATIA V5, refer to the licensemanagement model topic in the Use limitation applies section.

Macro replay capabilities

CATIA V5 has built-in macro record and replay capabilities. For UNIX, the interpreteris VB Script 3.0 from Mainsoft. Its components are included in CATIA V5 as sharedlibraries.

For Windows, the interpreter is either:

• VB Script at a minimum level of V5.0. It is delivered with Microsoft InternetExplorer. VB Script libraries at level 5.0.0.3715 are delivered with MicrosoftInternet Explorer 5.0 or at later levels with later versions of Internet Explorer.Use of VB Script is recommended for developing Microsoft Windows- and UNIX-compatible macros.

• Microsoft VisualBasic for Applications (VBA) at a minimum level of 6.0. VBA isdelivered and installed by default with CATIA V5.

Printer and plotter support

• UNIX - CATIA V5 supports the following plotter/printer languages:

– CGM-ISO, ATA, CALS

– Hewlett Packard HP-GL/2-RTL and HP-GL or IBM-GL subsets

– OCE Graphics GPR50: VDF plotting routines

– PostScript®

• Windows - Printers and plotters are supported through the vendor's drivers for thetargeted printer or plotter relative to the targeted version of the operating system.Contact the printer or plotter vendor for requirements and support.

Batch monitoring using WebSphere® MQ (WMQ) (formerly MQSeries®)

Using WMQ communication tools, some batch operations can be launched remotely.When implemented at the batch level, this optional feature requires WMQ at


http://www.ibm.com/software/lum



minimum level 6.0. For availability of client and server components on supportedplatforms, visit

http://www.ibm.com/software/integration/wmq/

WMQ Client is required on systems where the transaction is initiated. WMQ Server isrequired on systems where remote batches are executed.

CATIA V5 general packaging principles

• A CATIA P1 product or a CATIA P1 configuration requires or must include (in thecase of configurations) CATIA - Object Manager 1 (CO1). P1 products can beused on P2 or P3, and in such cases, they operate with CATIA - Object Manager 2(COM) or CATIA - Object Manager 3 (CO3), respectively.

• A CATIA P2 product or a CATIA P2 configuration requires, or must include (inthe case of configurations), CATIA - Object Manager 2 (COM). P2 products canbe used on P3, and in such cases, they operate with CATIA - Object Manager 3(CO3).

• CATIA - COM 1 to 2 Extension (C12) allows all P2 products to be added on to P1configurations. The C12 product effectively upgrades the P1 infrastructure (CO1)to the P2 infrastructure (COM). The C12 product does not change the underlyingP1 configuration; included products remain P1. The C12 product can be used as ashareable (C12) or add-on (C12) product.

• A CATIA P3 product or a CATIA P3 configuration requires or must include (in thecase of configurations) CATIA - Object Manager 3 (CO3). P1, P2, and P3 shareableand add-on products are available to P3 configurations as shareable or add-onproducts.

• License keys for CATIA configurations are acquired and released for the totalconfiguration.

• The functions within a configuration cannot be shared.

• A configuration is required for each CATIA V5 seat.

• CATIA V5 add-on (AOP) and sharable products may require prerequisite productsthat are not included in a standard purchased configuration. When a prerequisiteproduct is not included in the selected standard configuration, both the AOP andits prerequisite products must be purchased and included as AOPs within a customconfiguration. Prerequisites for shareable products can be satisfied by a standardconfiguration, by an AOP within a custom configuration, or by a shareable product.

• CATIA - V4 Integration 2 (V4I) is included in all P2 and P3 configurations, andCATIA - V4 Integration 1 (V41) is included in all P1 configurations.

Planning information

Packaging

The deliverables associated with each of the three platforms (P1, P2, and P3) areshipped in separate box kits.

Platform 1 box kit (LK3T-5100)

Ships with all orders for P1 configurations.

• 11 CDs (LCD4-4077)

– AIX

– Solaris

– Windows

These CDs include P1 products and configurations and the national languageproduct integrated information (PII).

• Program Directory CD (LCD7-3619)

• LUM CD (LCD4-7882)

• Publications

http://www.ibm.com/software/integration/wmq/



– English softcopy publications collection kit - two CDs (SK3T-4124)

– IBM informal documents

-- Memorandum to Current Users (GI11-4403)

-- Registration Memorandum (GI11-4404)


Ships with all orders for P2 configurations, CATIA - COM 1 to 2 Extension Product(C12) or CATIA - COM 1 to 2 Extension AOP (C12)

• 15 CATIA CDs (LCD4-3756)

– AIX

– Solaris

– Windows

These CDs include P1 and P2 products and configurations and national languagePII.

• Two SIMULIA CDs (LCD7-3665)

– Windows 32-bit

– Windows 64-bit



• Publications






Ships with all orders for P3 configurations.

• Fifteen CDs (LCD4-5339)

– AIX

– Solaris

– Windows

These CDs include P1, P2, and P3 products and configurations and nationallanguage PII.

• Two SIMULIA CDs (LCD7-3665)

– Windows 32-bit

– Windows 64-bit



• Publications







The following table describes the contents of the platform box kits in terms of theinstallable configurations and products each contains.

Installable InstallableBox kit configurations products

P3 P2 and P3 P1, P2, and P3P2 P2 P1 and P2P1 P1 P1

SIMULIA

• Two CDs (LCD7-3665)

– SIMULIA V5.20 for Windows 32-bit

– SIMULIA V5.20 for Windows 64-bit

• Program directory CD (LCD7-3619)

• IBM informal documents

– Memorandum to Current Users (GI11-4403)

– Registration Memorandum (GI11-4404)

Shipping package

In addition to the box kits, the shipping package contains:

• Licensed Program Specification (GH52-1328)

• With an order for the CADAM Drafting for V5 (CCD) add-on product, the two CCDproduct CDs (LCD4-4076)

• With an order for one or more MultiCAx products, the six MultiCAx product CDs(LCD4-7456)

Note: The CATIA API CDs are shipped with CAA RADE as LCD4-7422. Refer toSoftware Announcement fZP10-0017, dated February 16, 2010.

Security, auditability, and control

The announced programs use the security and auditability features of the operatingsystems software. The customer is responsible for evaluation, selection, andimplementation of security features, administrative procedures, and appropriatecontrols in application systems and communication facilities.

Ordering information

Current licensees

Current licensee will receive this update from IBM Software Delivery and Fulfillmentautomatically.

Should you require further assistance, contact your country IBM representative.

New licensees

Orders for new licenses will be accepted now.

For new licensees, shipment will begin on the planned availability date. Shipmentwill not occur before the availability date. Should you require assistance, contactyour country IBM representative.

The following information applies only to:

• France

http://www.ibm.com/common/ssi/cgi-bin/ssialias?infotype=an&subtype=ca&appname=gpateam&supplier=&letternum=ENUSfZP10-0017



• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

An order for CATIA V5 basic licensed programs consists of:

• A licensed standard configuration program order (5671-XXX)

• A licensed custom configuration (5671-XXX) with add-on products (5673-XXX)

• Optional licensed shareable product program order (5671-XXX)

• One system program order (SPO) (5628-CV5)

The 5671-XXX and 5673-XXX orders are required for billing and asset registration.The 5628-CV5 order is required to ship machine-readable materials andpublications.

The following information applies to all countries except:

• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

An order for CATIA V5 basic licensed programs consists of:

• A licensed standard configuration program order (5691-XXX)

• A licensed custom configuration (5691-XXX) with add-on products (5693-XXX)

• Optional licensed shareable product program order (5691-XXX)

• One system program order (SPO) (5628-ACN)

The 5691-XXX and 5693-XXX orders are required for billing and asset registration.The 5628-ACN order is required to ship machine-readable materials andpublications.

CATIA V5 is available only on CD-ROM.

Release summary

New configurations

CATIA - 3D Insight 2 (I3D)CATIA - ICEM Shape Design Reverse Engineering 2 (IRE)CATIA - ICEM Shape Design Real Time Renderer 2 (ISD)CATIA - ICEM Shape Design Center & Expert 2 (ISX)

New shareable products

CATIA - ICEM Shape Design AeroExpert 2 (IAE)CATIA - ICEM Shape Design Expert 2 (IEX)CATIA - Extended STEP Interface 2 (SXT)



SIMULIA - Nonlinear Structural Analysis (ANL)SIMULIA - Thermal Analysis (ATH)SIMULIA - Rule Based Meshing (RBM)

New add-on products (AOPs)

CATIA - ICEM Shape Design AeroExpert 2 (IAE)CATIA - ICEM Shape Design Center 2 (ICM)CATIA - ICEM Shape Design Expert 2 (IEX)CATIA - Extended STEP Interface 2 (SXT)SIMULIA - Nonlinear Structural Analysis (ANL)SIMULIA - Thermal Analysis (ATH)SIMULIA - Rule Based Meshing (RBM)SIMULIA - Rule Based Meshing (RBM)

Withdrawn configuration

CATIA - Tolerance Analysis of Deformable Assembly 3 (TA3)

Information on how to order upgrades to replacement configurations is availablefrom your IBM representative.

Withdrawn product

CATIA - Tolerance Analysis of Deformable Assembly 3 (TAA)

Information on how to order upgrades to replacement products is available fromyour IBM representative.

Product ordering using CBS


• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

The ShopPLM configurator must be used to submit all CBS orders. For informationon the ShopPLM configurator, visit

https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss

Access to this site requires an IBM user ID and password, which can be obtained atno charge.

The following tier levels apply for all configurations and products in thisannouncement:

• Recurring license

ALC or RLC User 1-9ALC or RLC User 10-25ALC or RLC User 26+

• Variable term license

YLC User 1-9YLC User 10-25

https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss



YLC User 26+

The following ordering information applies to Germany only.

New CATIA V5 configurations

Entitlement License Pricingentity Description option metric

5671-I3D CATIA 3D Insight 2

S015XNV I3D Config Primary License Lic to Use PLC per UserS015XND I3D Config Recurring License Basic ALC per UserS015XMC I3D Config Variable Term Lic Basic YLC per User

5671-IRE CATIA ICEM Shape Design Reverse Engineering 2

S015X6S IRE Config Primary License Lic to Use PLC per UserS015X4G IRE Config Recurring License Basic ALC per UserS015X69 IRE Config Variable Term Lic Basic YLC per User

5671-ISD CATIA ICEM Shape Design Real Time Renderer 2

S015X8M ISD Config Primary License Lic to Use PLC per UserS015X8J ISD Config Recurring License Basic ALC per UserS015X88 ISD Config Variable Term Lic Basic YLC per User

5671-ISX CATIA ICEM Shape Design Center and Expert 2

S015XKP ISX Config Primary License Lic to Use PLC per UserS015XFL ISX Config Recurring License Basic ALC per UserS015XFZ ISX Config Variable Term Lic Basic YLC per User

New CATIA V5 shareable products

5671-IAE CATIA ICEM Shape Design AeroExpert 2

S015XTX IAE Prod Primary License Lic to Use PLC per UserS015XV0 IAE Prod Recurring License Basic ALC per UserS015XTZ IAE Prod Variable Term Lic Basic YLC per User

5671-IEX CATIA ICEM Shape Design Expert 2

S015XTH IEX Prod Primary License Lic to Use PLC per UserS015XTK IEX Prod Recurring License Basic ALC per UserS015XTM IEX Prod Variable Term Lic Basic YLC per User

5671-SXT CATIA Extended STEP Interface 2

S015XTF SXT Prod Primary License Lic to Use PLC per UserS015XTC SXT Prod Recurring License Basic ALC per UserS015XTG SXT Prod Variable Term Lic Basic YLC per User

New SIMULIA V5 shareable products

5671-ANL SIMULIA Nonlinear Structural Analysis

S015XV6 ANL Prod Primary License Lic to Use PLC per UserS015XV8 ANL Prod Recurring License Basic ALC per UserS015XV7 ANL Prod Variable Term Lic Basic YLC per User



5671-ATH SIMULIA Thermal Analysis

S015XT0 ATH Prod Primary License Lic to Use PLC per UserS015XT2 ATH Prod Recurring License Basic ALC per UserS015XT1 ATH Prod Variable Term Lic Basic YLC per User

5671-RBM SIMULIA Rule Based Meshing

S015XT5 RBM Prod Primary License Lic to Use PLC per UserS015XT6 RBM Prod Recurring License Basic ALC per UserS015XT7 RBM Prod Variable Term Lic Basic YLC per User

New CATIA V5 AOPs


S015XVG IAE AOP Primary License Lic to Use PLC per UserS015XVF IAE AOP Recurring License Basic ALC per UserS015XVD IAE AOP Variable Term Lic Basic YLC per User

5673-ICM CATIA ICEM Shape Design Center 2

S015XV1 ICM AOP Primary License Lic to Use PLC per UserS015XV2 ICM AOP Recurring License Basic ALC per UserS015XV5 ICM AOP Variable Term Lic Basic YLC per User


S015XVN IEX AOP Primary License Lic to Use PLC per UserS015XVK IEX AOP Recurring License Basic ALC per UserS015XVJ IEX AOP Variable Term Lic Basic YLC per User


S015XTR SXT AOP Primary License Lic to Use PLC per UserS015XTS SXT AOP Recurring License Basic ALC per UserS015XTN SXT AOP Variable Term Lic Basic YLC per User

New SIMULIA V5 AOPs


S015XSP ANL AOP Primary License Lic to Use PLC per UserS015XSN ANL AOP Recurring License Basic ALC per UserS015XSM ANL AOP Variable Term Lic Basic YLC per User


S015XSH ATH AOP Primary License Lic to Use PLC per UserS015XSJ ATH AOP Recurring License Basic ALC per UserS015XSG ATH AOP Variable Term Lic Basic YLC per User


S015XST RBM AOP Primary License Lic to Use PLC per UserS015XSW RBM AOP Recurring License Basic ALC per UserS015XSV RBM AOP Variable Term Lic Basic YLC per User

The following ordering information applies only to:

• France

• Ireland



• Italy

• Portugal

• South Africa

• Spain

• United Kingdom


5671-I3D CATIA 3D Insight 2

S015XNV I3D Config Primary License Lic to Use PLC per UserS015XND I3D Config Recurring License Basic RLC per UserS015XMC I3D Config Variable Term Lic Basic YLC per User

5671-IRE CATIA ICEM Shape Design Reverse Engineering 2

S015X6S IRE Config Primary License Lic to Use PLC per UserS015X4G IRE Config Recurring License Basic RLC per UserS015X69 IRE Config Variable Term Lic Basic YLC per User

5671-ISD CATIA ICEM Shape Design Real Time Renderer 2

S015X8M ISD Config Primary License Lic to Use PLC per UserS015X8J ISD Config Recurring License Basic RLC per UserS015X88 ISD Config Variable Term Lic Basic YLC per User

5671-ISX CATIA ICEM Shape Design Center and Expert 2

S015XKP ISX Config Primary License Lic to Use PLC per UserS015XFL ISX Config Recurring License Basic RLC per UserS015XFZ ISX Config Variable Term Lic Basic YLC per User



S015XTX IAE Prod Primary License Lic to Use PLC per UserS015XV0 IAE Prod Recurring License Basic RLC per UserS015XTZ IAE Prod Variable Term Lic Basic YLC per User


S015XTH IEX Prod Primary License Lic to Use PLC per UserS015XTK IEX Prod Recurring License Basic RLC per UserS015XTM IEX Prod Variable Term Lic Basic YLC per User


S015XTF SXT Prod Primary License Lic to Use PLC per UserS015XTC SXT Prod Recurring License Basic RLC per UserS015XTG SXT Prod Variable Term Lic Basic YLC per User



S015XV6 ANL Prod Primary License Lic to Use PLC per UserS015XV8 ANL Prod Recurring License Basic RLC per UserS015XV7 ANL Prod Variable Term Lic Basic YLC per User




S015XT0 ATH Prod Primary License Lic to Use PLC per UserS015XT2 ATH Prod Recurring License Basic RLC per UserS015XT1 ATH Prod Variable Term Lic Basic YLC per User


S015XT5 RBM Prod Primary License Lic to Use PLC per UserS015XT6 RBM Prod Recurring License Basic RLC per UserS015XT7 RBM Prod Variable Term Lic Basic YLC per User

New CATIA V5 AOPs

5673-IAE CATIA ICEM Shape Design AeroExpert 2 AOP

S015XVG IAE AOP Primary License Lic to Use PLC per UserS015XVF IAE AOP Recurring License Basic RLC per UserS015XVD IAE AOP Variable Term Lic Basic YLC per User

5673-ICM CATIA ICEM Shape Design Center 2 AOP

S015XV1 ICM AOP Primary License Lic to Use PLC per UserS015XV2 ICM AOP Recurring License Basic RLC per UserS015XV5 ICM AOP Variable Term Lic Basic YLC per User

5673-IEX CATIA ICEM Shape Design Expert 2 AOP

S015XVN IEX AOP Primary License Lic to Use PLC per UserS015XVK IEX AOP Recurring License Basic RLC per UserS015XVJ IEX AOP Variable Term Lic Basic YLC per User

5673-SXT CATIA Extended STEP Interface 2 AOP

S015XTR SXT AOP Primary License Lic to Use PLC per UserS015XTS SXT AOP Recurring License Basic RLC per UserS015XTN SXT AOP Variable Term Lic Basic YLC per User

New SIMULIA V5 AOPs

5673-ANL SIMULIA Nonlinear Structural Analysis AOP

S015XSP ANL AOP Primary License Lic to Use PLC per UserS015XSN ANL AOP Recurring License Basic RLC per UserS015XSM ANL AOP Variable Term Lic Basic YLC per User

5673-ATH SIMULIA Thermal Analysis AOP

S015XSH ATH AOP Primary License Lic to Use PLC per UserS015XSJ ATH AOP Recurring License Basic RLC per UserS015XSG ATH AOP Variable Term Lic Basic YLC per User

5673-RBM SIMULIA Rule Based Meshing AOP

S015XST RBM AOP Primary License Lic to Use PLC per UserS015XSW RBM AOP Recurring License Basic RLC per UserS015XSV RBM AOP Variable Term Lic Basic YLC per User

The following ordering information applies only to:

• France



• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

New CATIA V5 non-billable AOP indicators

5671-AB3 CATIA - Automotive Body in White Design 3 Configuration

S015Z95 5673-ANL AOP Indicator AOP Registration No ChgS015Z94 5673-ATH AOP Indicator AOP Registration No ChgS015Z92 5673-IAE AOP Indicator AOP Registration No ChgS015Z96 5673-ICM AOP Indicator AOP Registration No ChgS015Z98 5673-IEX AOP Indicator AOP Registration No ChgS015Z97 5673-RBM AOP Indicator AOP Registration No ChgS015Z93 5673-SXT AOP Indicator AOP Registration No Chg

5671-ADD CATIA - Advanced Design 2 Configuration

S015ZFM 5673-ANL AOP Indicator AOP Registration No ChgS015ZFK 5673-ATH AOP Indicator AOP Registration No ChgS015ZFH 5673-IAE AOP Indicator AOP Registration No ChgS015ZFG 5673-ICM AOP Indicator AOP Registration No ChgS015ZFJ 5673-IEX AOP Indicator AOP Registration No ChgS015ZFL 5673-RBM AOP Indicator AOP Registration No ChgS015ZFN 5673-SXT AOP Indicator AOP Registration No Chg

5671-AM2 CATIA - Designer & Advanced Machinist 2 Configuration

S015Z7R 5673-ANL AOP Indicator AOP Registration No ChgS015Z7M 5673-ATH AOP Indicator AOP Registration No ChgS015Z7L 5673-IAE AOP Indicator AOP Registration No ChgS015Z7P 5673-ICM AOP Indicator AOP Registration No ChgS015Z7N 5673-IEX AOP Indicator AOP Registration No ChgS015Z7T 5673-RBM AOP Indicator AOP Registration No ChgS015Z7S 5673-SXT AOP Indicator AOP Registration No Chg

5671-CD3 CATIA - Composites Design 3 Configuration

S015Z90 5673-ANL AOP Indicator AOP Registration No ChgS015Z91 5673-ATH AOP Indicator AOP Registration No ChgS015Z8X 5673-IAE AOP Indicator AOP Registration No ChgS015Z8W 5673-ICM AOP Indicator AOP Registration No ChgS015Z8T 5673-IEX AOP Indicator AOP Registration No ChgS015Z8V 5673-RBM AOP Indicator AOP Registration No ChgS015Z8Z 5673-SXT AOP Indicator AOP Registration No Chg

5671-CV2 CATIA - Core & Cavity Design 2 Configuration

S015Z9V 5673-ANL AOP Indicator AOP Registration No ChgS015Z9S 5673-ATH AOP Indicator AOP Registration No ChgS015Z9W 5673-IAE AOP Indicator AOP Registration No ChgS015Z9X 5673-ICM AOP Indicator AOP Registration No ChgS015Z9T 5673-IEX AOP Indicator AOP Registration No ChgS015Z9Z 5673-RBM AOP Indicator AOP Registration No ChgS015ZB0 5673-SXT AOP Indicator AOP Registration No Chg



5671-DP2 CATIA - Drawing Production 2 Configuration

S015Z82 5673-ANL AOP Indicator AOP Registration No ChgS015Z7V 5673-ATH AOP Indicator AOP Registration No ChgS015Z81 5673-IAE AOP Indicator AOP Registration No ChgS015Z7X 5673-ICM AOP Indicator AOP Registration No ChgS015Z7Z 5673-IEX AOP Indicator AOP Registration No ChgS015Z80 5673-RBM AOP Indicator AOP Registration No ChgS015Z7W 5673-SXT AOP Indicator AOP Registration No Chg

5671-DR1 CATIA - Drafting 1 Configuration

S015Z76 5673-ANL AOP Indicator AOP Registration No ChgS015Z74 5673-ATH AOP Indicator AOP Registration No ChgS015Z79 5673-IAE AOP Indicator AOP Registration No ChgS015Z7B 5673-ICM AOP Indicator AOP Registration No ChgS015Z77 5673-IEX AOP Indicator AOP Registration No ChgS015Z78 5673-RBM AOP Indicator AOP Registration No ChgS015Z75 5673-SXT AOP Indicator AOP Registration No Chg

5671-EF2 CATIA - Electrical System Functional Definition 2

S015Z7J 5673-ANL AOP Indicator AOP Registration No ChgS015Z7D 5673-ATH AOP Indicator AOP Registration No ChgS015Z7H 5673-IAE AOP Indicator AOP Registration No ChgS015Z7G 5673-ICM AOP Indicator AOP Registration No ChgS015Z7C 5673-IEX AOP Indicator AOP Registration No ChgS015Z7F 5673-RBM AOP Indicator AOP Registration No ChgS015Z7K 5673-SXT AOP Indicator AOP Registration No Chg

5671-EI2 CATIA Electrical Wire Harness Installation 2 Configuration

S015Z8B 5673-ANL AOP Indicator AOP Registration No ChgS015Z8H 5673-ATH AOP Indicator AOP Registration No ChgS015Z8J 5673-IAE AOP Indicator AOP Registration No ChgS015Z8G 5673-ICM AOP Indicator AOP Registration No ChgS015Z8C 5673-IEX AOP Indicator AOP Registration No ChgS015Z8F 5673-RBM AOP Indicator AOP Registration No ChgS015Z8D 5673-SXT AOP Indicator AOP Registration No Chg

5671-ER2 CATIA - Electrical Signal Routing 2 Configuration

S015Z83 5673-ANL AOP Indicator AOP Registration No ChgS015Z84 5673-ATH AOP Indicator AOP Registration No ChgS015Z88 5673-IAE AOP Indicator AOP Registration No ChgS015Z86 5673-ICM AOP Indicator AOP Registration No ChgS015Z89 5673-IEX AOP Indicator AOP Registration No ChgS015Z85 5673-RBM AOP Indicator AOP Registration No ChgS015Z87 5673-SXT AOP Indicator AOP Registration No Chg

5671-FS2 CATIA - FreeStyle Shaper 2 Configuration

S015Z9H 5673-ANL AOP Indicator AOP Registration No ChgS015Z99 5673-ATH AOP Indicator AOP Registration No ChgS015Z9C 5673-IAE AOP Indicator AOP Registration No ChgS015Z9B 5673-ICM AOP Indicator AOP Registration No ChgS015Z9G 5673-IEX AOP Indicator AOP Registration No ChgS015Z9D 5673-RBM AOP Indicator AOP Registration No ChgS015Z9F 5673-SXT AOP Indicator AOP Registration No Chg

5671-HD2 CATIA - Hybrid Design 2 Configuration

S015ZB5 5673-ANL AOP Indicator AOP Registration No ChgS015ZB3 5673-ATH AOP Indicator AOP Registration No Chg



S015ZB2 5673-IAE AOP Indicator AOP Registration No ChgS015ZB1 5673-ICM AOP Indicator AOP Registration No ChgS015ZB7 5673-IEX AOP Indicator AOP Registration No ChgS015ZB4 5673-RBM AOP Indicator AOP Registration No ChgS015ZB6 5673-SXT AOP Indicator AOP Registration No Chg

5671-IRE CATIA ICEM Shape Design Reverse Engineering 2 Configuration

S015X4W 5673-ABT AOP Indicator AOP Registration No ChgS015X7V 5673-AMG AOP Indicator AOP Registration No ChgS015X84 5673-ANL AOP Indicator AOP Registration No ChgS015X6Z 5673-ANR AOP Indicator AOP Registration No ChgS015X5X 5673-AS1 AOP Indicator AOP Registration No ChgS015X7C 5673-ASD AOP Indicator AOP Registration No ChgS015X83 5673-ATH AOP Indicator AOP Registration No ChgS015X4Z 5673-BK2 AOP Indicator AOP Registration No ChgS015X42 5673-CBD AOP Indicator AOP Registration No ChgS015X3L 5673-CC1 AOP Indicator AOP Registration No ChgS015X50 5673-CCD AOP Indicator AOP Registration No ChgS015X39 5673-CCV AOP Indicator AOP Registration No ChgS015X7L 5673-CD1 AOP Indicator AOP Registration No ChgS015X74 5673-CFO AOP Indicator AOP Registration No ChgS015X6W 5673-CNA AOP Indicator AOP Registration No ChgS015X7S 5673-CPE AOP Indicator AOP Registration No ChgS015X7K 5673-CPM AOP Indicator AOP Registration No ChgS015X4L 5673-CPR AOP Indicator AOP Registration No ChgS015X48 5673-DF1 AOP Indicator AOP Registration No ChgS015X71 5673-DL1 AOP Indicator AOP Registration No ChgS015X70 5673-DMN AOP Indicator AOP Registration No ChgS015X6L 5673-DMO AOP Indicator AOP Registration No ChgS015X6V 5673-DN1 AOP Indicator AOP Registration No ChgS015X54 5673-DT1 AOP Indicator AOP Registration No ChgS015X7G 5673-EC1 AOP Indicator AOP Registration No ChgS015X3W 5673-ECR AOP Indicator AOP Registration No ChgS015X46 5673-EFD AOP Indicator AOP Registration No ChgS015X55 5673-EHF AOP Indicator AOP Registration No ChgS015X6R 5673-EHI AOP Indicator AOP Registration No ChgS015X41 5673-ELB AOP Indicator AOP Registration No ChgS015X7H 5673-ELD AOP Indicator AOP Registration No ChgS015X3S 5673-EQT AOP Indicator AOP Registration No ChgS015X60 5673-EST AOP Indicator AOP Registration No ChgS015X6N 5673-EW1 AOP Indicator AOP Registration No ChgS015X7F 5673-EWE AOP Indicator AOP Registration No ChgS015X72 5673-EWR AOP Indicator AOP Registration No ChgS015X5J 5673-FAR AOP Indicator AOP Registration No ChgS015X4B 5673-FIT AOP Indicator AOP Registration No ChgS015X4H 5673-FLX AOP Indicator AOP Registration No ChgS015X7X 5673-FM1 AOP Indicator AOP Registration No ChgS015X59 5673-FMD AOP Indicator AOP Registration No ChgS015X49 5673-FMP AOP Indicator AOP Registration No ChgS015X56 5673-FMS AOP Indicator AOP Registration No ChgS015X6G 5673-FR1 AOP Indicator AOP Registration No ChgS015X6P 5673-FS1 AOP Indicator AOP Registration No ChgS015X5G 5673-FSK AOP Indicator AOP Registration No ChgS015X45 5673-FSO AOP Indicator AOP Registration No ChgS015X6F 5673-FSP AOP Indicator AOP Registration No ChgS015X3K 5673-FT1 AOP Indicator AOP Registration No ChgS015X4V 5673-FTA AOP Indicator AOP Registration No ChgS015X5K 5673-GAS AOP Indicator AOP Registration No ChgS015X5B 5673-GD1 AOP Indicator AOP Registration No ChgS015X7W 5673-GDR AOP Indicator AOP Registration No ChgS015X52 5673-GDY AOP Indicator AOP Registration No ChgS015X79 5673-GP1 AOP Indicator AOP Registration No ChgS015X5V 5673-GPS AOP Indicator AOP Registration No ChgS015X5S 5673-GSD AOP Indicator AOP Registration No ChgS015X5Z 5673-GSO AOP Indicator AOP Registration No ChgS015X4C 5673-HA1 AOP Indicator AOP Registration No ChgS015X4R 5673-HAA AOP Indicator AOP Registration No ChgS015X6J 5673-HAC AOP Indicator AOP Registration No ChgS015X7T 5673-HBR AOP Indicator AOP Registration No ChgS015X66 5673-HGR AOP Indicator AOP Registration No ChgS015X76 5673-HME AOP Indicator AOP Registration No Chg



S015X3B 5673-HPA AOP Indicator AOP Registration No ChgS015X73 5673-HPC AOP Indicator AOP Registration No ChgS015X77 5673-HTC AOP Indicator AOP Registration No ChgS015X3G 5673-HVA AOP Indicator AOP Registration No ChgS015X5R 5673-HVD AOP Indicator AOP Registration No ChgS015X80 5673-IAE AOP Indicator AOP Registration No ChgS015X3H 5673-ID1 AOP Indicator AOP Registration No ChgS015X86 5673-IEX AOP Indicator AOP Registration No ChgS015X53 5673-IMA AOP Indicator AOP Registration No ChgS015X4S 5673-KE1 AOP Indicator AOP Registration No ChgS015X5H 5673-KIN AOP Indicator AOP Registration No ChgS015X7N 5673-KT1 AOP Indicator AOP Registration No ChgS015X44 5673-KWA AOP Indicator AOP Registration No ChgS015X3D 5673-KWE AOP Indicator AOP Registration No ChgS015X7M 5673-LG1 AOP Indicator AOP Registration No ChgS015X51 5673-LMG AOP Indicator AOP Registration No ChgS015X65 5673-LO1 AOP Indicator AOP Registration No ChgS015X3M 5673-MBG AOP Indicator AOP Registration No ChgS015X4K 5673-MLG AOP Indicator AOP Registration No ChgS015X4F 5673-MMG AOP Indicator AOP Registration No ChgS015X7R 5673-MPA AOP Indicator AOP Registration No ChgS015X7J 5673-MPG AOP Indicator AOP Registration No ChgS015X4X 5673-MSG AOP Indicator AOP Registration No ChgS015X4N 5673-MTD AOP Indicator AOP Registration No ChgS015X5M 5673-NCG AOP Indicator AOP Registration No ChgS015X4M 5673-NG1 AOP Indicator AOP Registration No ChgS015X6D 5673-NVG AOP Indicator AOP Registration No ChgS015X5L 5673-PD1 AOP Indicator AOP Registration No ChgS015X6C 5673-PDG AOP Indicator AOP Registration No ChgS015X5P 5673-PEO AOP Indicator AOP Registration No ChgS015X3F 5673-PFD AOP Indicator AOP Registration No ChgS015X40 5673-PG1 AOP Indicator AOP Registration No ChgS015X5N 5673-PH1 AOP Indicator AOP Registration No ChgS015X47 5673-PHS AOP Indicator AOP Registration No ChgS015X7Z 5673-PID AOP Indicator AOP Registration No ChgS015X6M 5673-PIP AOP Indicator AOP Registration No ChgS015X5T 5673-PKT AOP Indicator AOP Registration No ChgS015X6B 5673-PLO AOP Indicator AOP Registration No ChgS015X3R 5673-PMG AOP Indicator AOP Registration No ChgS015X67 5673-PSO AOP Indicator AOP Registration No ChgS015X4P 5673-PX1 AOP Indicator AOP Registration No ChgS015X87 5673-RBM AOP Indicator AOP Registration No ChgS015X5C 5673-RCD AOP Indicator AOP Registration No ChgS015X6T 5673-RM1 AOP Indicator AOP Registration No ChgS015X3T 5673-RSO AOP Indicator AOP Registration No ChgS015X68 5673-RT1 AOP Indicator AOP Registration No ChgS015X5F 5673-RTR AOP Indicator AOP Registration No ChgS015X43 5673-SDD AOP Indicator AOP Registration No ChgS015X57 5673-SDI AOP Indicator AOP Registration No ChgS015X3C 5673-SFD AOP Indicator AOP Registration No ChgS015X75 5673-SH1 AOP Indicator AOP Registration No ChgS015X3J 5673-SM1 AOP Indicator AOP Registration No ChgS015X61 5673-SMD AOP Indicator AOP Registration No ChgS015X7P 5673-SMG AOP Indicator AOP Registration No ChgS015X7B 5673-SP1 AOP Indicator AOP Registration No ChgS015X63 5673-SPA AOP Indicator AOP Registration No ChgS015X5W 5673-SPE AOP Indicator AOP Registration No ChgS015X6K 5673-SR1 AOP Indicator AOP Registration No ChgS015X3Z 5673-SRT AOP Indicator AOP Registration No ChgS015X3X 5673-SSR AOP Indicator AOP Registration No ChgS015X4J 5673-STC AOP Indicator AOP Registration No ChgS015X6H 5673-STL AOP Indicator AOP Registration No ChgS015X85 5673-SXT AOP Indicator AOP Registration No ChgS015X78 5673-TG1 AOP Indicator AOP Registration No ChgS015X62 5673-TL1 AOP Indicator AOP Registration No ChgS015X3N 5673-TUB AOP Indicator AOP Registration No ChgS015X5D 5673-TUD AOP Indicator AOP Registration No ChgS015X3V 5673-VOA AOP Indicator AOP Registration No ChgS015X4T 5673-WAV AOP Indicator AOP Registration No ChgS015X64 5673-WD1 AOP Indicator AOP Registration No ChgS015X6X 5673-WGD AOP Indicator AOP Registration No ChgS015X3P 5673-WS1 AOP Indicator AOP Registration No Chg



5671-ISD CATIA ICEM Shape Design Real Time Renderer 2 Configuration

S015X92 5673-ABT AOP Indicator AOP Registration No ChgS015X90 5673-AMG AOP Indicator AOP Registration No ChgS015XF6 5673-ANL AOP Indicator AOP Registration No ChgS015XBL 5673-ANR AOP Indicator AOP Registration No ChgS015XB3 5673-AS1 AOP Indicator AOP Registration No ChgS015XBV 5673-ASD AOP Indicator AOP Registration No ChgS015XF3 5673-ATH AOP Indicator AOP Registration No ChgS015XDN 5673-BK2 AOP Indicator AOP Registration No ChgS015X9D 5673-CBD AOP Indicator AOP Registration No ChgS015XBP 5673-CC1 AOP Indicator AOP Registration No ChgS015X9R 5673-CCD AOP Indicator AOP Registration No ChgS015XD4 5673-CCV AOP Indicator AOP Registration No ChgS015XC5 5673-CD1 AOP Indicator AOP Registration No ChgS015XBJ 5673-CFO AOP Indicator AOP Registration No ChgS015X98 5673-CNA AOP Indicator AOP Registration No ChgS015XD2 5673-CPE AOP Indicator AOP Registration No ChgS015X9B 5673-CPM AOP Indicator AOP Registration No ChgS015XDR 5673-CPR AOP Indicator AOP Registration No ChgS015X8T 5673-DF1 AOP Indicator AOP Registration No ChgS015X9P 5673-DL1 AOP Indicator AOP Registration No ChgS015XCK 5673-DMN AOP Indicator AOP Registration No ChgS015X9T 5673-DMO AOP Indicator AOP Registration No ChgS015X8H 5673-DN1 AOP Indicator AOP Registration No ChgS015XDG 5673-DSE AOP Indicator AOP Registration No ChgS015XF8 5673-DSS AOP Indicator AOP Registration No ChgS015XBX 5673-DT1 AOP Indicator AOP Registration No ChgS015XCD 5673-EC1 AOP Indicator AOP Registration No ChgS015XBK 5673-ECR AOP Indicator AOP Registration No ChgS015XCX 5673-EFD AOP Indicator AOP Registration No ChgS015XDP 5673-EHF AOP Indicator AOP Registration No ChgS015XBB 5673-EHI AOP Indicator AOP Registration No ChgS015XC9 5673-ELB AOP Indicator AOP Registration No ChgS015XB8 5673-ELD AOP Indicator AOP Registration No ChgS015X94 5673-EQT AOP Indicator AOP Registration No ChgS015X8X 5673-EST AOP Indicator AOP Registration No ChgS015XDM 5673-EW1 AOP Indicator AOP Registration No ChgS015XDT 5673-EWE AOP Indicator AOP Registration No ChgS015X8D 5673-EWR AOP Indicator AOP Registration No ChgS015X8F 5673-FAR AOP Indicator AOP Registration No ChgS015X9G 5673-FIT AOP Indicator AOP Registration No ChgS015XBZ 5673-FLX AOP Indicator AOP Registration No ChgS015XD1 5673-FM1 AOP Indicator AOP Registration No ChgS015XDS 5673-FMD AOP Indicator AOP Registration No ChgS015X8R 5673-FMP AOP Indicator AOP Registration No ChgS015X8V 5673-FMS AOP Indicator AOP Registration No ChgS015XCJ 5673-FR1 AOP Indicator AOP Registration No ChgS015XDF 5673-FS1 AOP Indicator AOP Registration No ChgS015XD3 5673-FSK AOP Indicator AOP Registration No ChgS015X8B 5673-FSO AOP Indicator AOP Registration No ChgS015XC3 5673-FSP AOP Indicator AOP Registration No ChgS015XC1 5673-FT1 AOP Indicator AOP Registration No ChgS015XB5 5673-FTA AOP Indicator AOP Registration No ChgS015X89 5673-GAS AOP Indicator AOP Registration No ChgS015XCH 5673-GD1 AOP Indicator AOP Registration No ChgS015X9F 5673-GDR AOP Indicator AOP Registration No ChgS015XD6 5673-GDY AOP Indicator AOP Registration No ChgS015XDZ 5673-GP1 AOP Indicator AOP Registration No ChgS015XC7 5673-GPS AOP Indicator AOP Registration No ChgS015XCB 5673-GSD AOP Indicator AOP Registration No ChgS015XC6 5673-GSO AOP Indicator AOP Registration No ChgS015XC2 5673-HA1 AOP Indicator AOP Registration No ChgS015XCR 5673-HAA AOP Indicator AOP Registration No ChgS015X9C 5673-HAC AOP Indicator AOP Registration No ChgS015XCM 5673-HBR AOP Indicator AOP Registration No ChgS015XBT 5673-HGR AOP Indicator AOP Registration No ChgS015X93 5673-HME AOP Indicator AOP Registration No ChgS015X8K 5673-HPA AOP Indicator AOP Registration No ChgS015XBH 5673-HPC AOP Indicator AOP Registration No ChgS015XB7 5673-HTC AOP Indicator AOP Registration No ChgS015XCW 5673-HVA AOP Indicator AOP Registration No Chg



S015XCZ 5673-HVD AOP Indicator AOP Registration No ChgS015XF4 5673-IAE AOP Indicator AOP Registration No ChgS015XCS 5673-ID1 AOP Indicator AOP Registration No ChgS015XF1 5673-IEX AOP Indicator AOP Registration No ChgS015X91 5673-IMA AOP Indicator AOP Registration No ChgS015XCG 5673-KE1 AOP Indicator AOP Registration No ChgS015X96 5673-KIN AOP Indicator AOP Registration No ChgS015XC8 5673-KT1 AOP Indicator AOP Registration No ChgS015X8W 5673-KWA AOP Indicator AOP Registration No ChgS015X9X 5673-KWE AOP Indicator AOP Registration No ChgS015X9K 5673-LG1 AOP Indicator AOP Registration No ChgS015XBN 5673-LMG AOP Indicator AOP Registration No ChgS015XDV 5673-LO1 AOP Indicator AOP Registration No ChgS015XBS 5673-MBG AOP Indicator AOP Registration No ChgS015X9Z 5673-MLG AOP Indicator AOP Registration No ChgS015XCC 5673-MMG AOP Indicator AOP Registration No ChgS015XBD 5673-MPA AOP Indicator AOP Registration No ChgS015XBR 5673-MPG AOP Indicator AOP Registration No ChgS015XDD 5673-MSG AOP Indicator AOP Registration No ChgS015XB2 5673-MTD AOP Indicator AOP Registration No ChgS015XDJ 5673-NCG AOP Indicator AOP Registration No ChgS015X8G 5673-NG1 AOP Indicator AOP Registration No ChgS015XB1 5673-NVG AOP Indicator AOP Registration No ChgS015X9S 5673-PD1 AOP Indicator AOP Registration No ChgS015XB6 5673-PDG AOP Indicator AOP Registration No ChgS015XC4 5673-PEO AOP Indicator AOP Registration No ChgS015X9H 5673-PFD AOP Indicator AOP Registration No ChgS015XDX 5673-PG1 AOP Indicator AOP Registration No ChgS015XB9 5673-PH1 AOP Indicator AOP Registration No ChgS015X9M 5673-PHS AOP Indicator AOP Registration No ChgS015XCV 5673-PID AOP Indicator AOP Registration No ChgS015XBW 5673-PIP AOP Indicator AOP Registration No ChgS015XB0 5673-PKT AOP Indicator AOP Registration No ChgS015X95 5673-PLO AOP Indicator AOP Registration No ChgS015XC0 5673-PMG AOP Indicator AOP Registration No ChgS015XD0 5673-PSO AOP Indicator AOP Registration No ChgS015XBG 5673-PX1 AOP Indicator AOP Registration No ChgS015X9L 5673-QSR AOP Indicator AOP Registration No ChgS015XF7 5673-RBM AOP Indicator AOP Registration No ChgS015XD9 5673-RCD AOP Indicator AOP Registration No ChgS015XDW 5673-RM1 AOP Indicator AOP Registration No ChgS015X9V 5673-RSO AOP Indicator AOP Registration No ChgS015XBF 5673-RT1 AOP Indicator AOP Registration No ChgS015X8Z 5673-SDD AOP Indicator AOP Registration No ChgS015XBM 5673-SDI AOP Indicator AOP Registration No ChgS015XDL 5673-SFD AOP Indicator AOP Registration No ChgS015X9J 5673-SH1 AOP Indicator AOP Registration No ChgS015X8S 5673-SM1 AOP Indicator AOP Registration No ChgS015X8L 5673-SMD AOP Indicator AOP Registration No ChgS015X8N 5673-SMG AOP Indicator AOP Registration No ChgS015X8C 5673-SP1 AOP Indicator AOP Registration No ChgS015XCP 5673-SPA AOP Indicator AOP Registration No ChgS015X97 5673-SPE AOP Indicator AOP Registration No ChgS015XCN 5673-SR1 AOP Indicator AOP Registration No ChgS015XD8 5673-SRT AOP Indicator AOP Registration No ChgS015XDC 5673-SSR AOP Indicator AOP Registration No ChgS015XCT 5673-STC AOP Indicator AOP Registration No ChgS015XDH 5673-STL AOP Indicator AOP Registration No ChgS015XF5 5673-SXT AOP Indicator AOP Registration No ChgS015XCL 5673-TG1 AOP Indicator AOP Registration No ChgS015X9W 5673-TL1 AOP Indicator AOP Registration No ChgS015X8P 5673-TUB AOP Indicator AOP Registration No ChgS015XD7 5673-TUD AOP Indicator AOP Registration No ChgS015XBC 5673-VOA AOP Indicator AOP Registration No ChgS015XDK 5673-WAV AOP Indicator AOP Registration No ChgS015X9N 5673-WD1 AOP Indicator AOP Registration No ChgS015XDB 5673-WGD AOP Indicator AOP Registration No ChgS015X99 5673-WS1 AOP Indicator AOP Registration No Chg



5671-ISX CATIA ICEM Shape Design Center and Expert 2 Configuration

S015XGN 5673-ABT AOP Indicator AOP Registration No ChgS015XHP 5673-AMG AOP Indicator AOP Registration No ChgS015XL7 5673-ANL AOP Indicator AOP Registration No ChgS015XGV 5673-ANR AOP Indicator AOP Registration No ChgS015XKS 5673-AS1 AOP Indicator AOP Registration No ChgS015XJC 5673-ASD AOP Indicator AOP Registration No ChgS015XL3 5673-ATH AOP Indicator AOP Registration No ChgS015XJD 5673-BK2 AOP Indicator AOP Registration No ChgS015XK5 5673-CBD AOP Indicator AOP Registration No ChgS015XKK 5673-CC1 AOP Indicator AOP Registration No ChgS015XJ4 5673-CCD AOP Indicator AOP Registration No ChgS015XGT 5673-CCV AOP Indicator AOP Registration No ChgS015XGP 5673-CD1 AOP Indicator AOP Registration No ChgS015XK4 5673-CFO AOP Indicator AOP Registration No ChgS015XJ9 5673-CNA AOP Indicator AOP Registration No ChgS015XG2 5673-CPE AOP Indicator AOP Registration No ChgS015XGJ 5673-CPM AOP Indicator AOP Registration No ChgS015XHW 5673-CPR AOP Indicator AOP Registration No ChgS015XHZ 5673-DF1 AOP Indicator AOP Registration No ChgS015XKT 5673-DL1 AOP Indicator AOP Registration No ChgS015XK9 5673-DMN AOP Indicator AOP Registration No ChgS015XJ0 5673-DMO AOP Indicator AOP Registration No ChgS015XKZ 5673-DN1 AOP Indicator AOP Registration No ChgS015XGM 5673-DSE AOP Indicator AOP Registration No ChgS015XKD 5673-DSS AOP Indicator AOP Registration No ChgS015XKW 5673-DT1 AOP Indicator AOP Registration No ChgS015XK3 5673-EC1 AOP Indicator AOP Registration No ChgS015XJ8 5673-ECR AOP Indicator AOP Registration No ChgS015XHD 5673-EFD AOP Indicator AOP Registration No ChgS015XJP 5673-EHF AOP Indicator AOP Registration No ChgS015XJB 5673-EHI AOP Indicator AOP Registration No ChgS015XKM 5673-ELB AOP Indicator AOP Registration No ChgS015XJL 5673-ELD AOP Indicator AOP Registration No ChgS015XJ3 5673-EQT AOP Indicator AOP Registration No ChgS015XFJ 5673-EST AOP Indicator AOP Registration No ChgS015XF9 5673-EW1 AOP Indicator AOP Registration No ChgS015XHK 5673-EWE AOP Indicator AOP Registration No ChgS015XHG 5673-EWR AOP Indicator AOP Registration No ChgS015XHX 5673-FAR AOP Indicator AOP Registration No ChgS015XGX 5673-FIT AOP Indicator AOP Registration No ChgS015XJS 5673-FLX AOP Indicator AOP Registration No ChgS015XFC 5673-FM1 AOP Indicator AOP Registration No ChgS015XGK 5673-FMD AOP Indicator AOP Registration No ChgS015XKJ 5673-FMP AOP Indicator AOP Registration No ChgS015XH1 5673-FMS AOP Indicator AOP Registration No ChgS015XHN 5673-FR1 AOP Indicator AOP Registration No ChgS015XGR 5673-FS1 AOP Indicator AOP Registration No ChgS015XH3 5673-FSK AOP Indicator AOP Registration No ChgS015XH0 5673-FSO AOP Indicator AOP Registration No ChgS015XJH 5673-FSP AOP Indicator AOP Registration No ChgS015XFH 5673-FT1 AOP Indicator AOP Registration No ChgS015XJF 5673-FTA AOP Indicator AOP Registration No ChgS015XH7 5673-GAS AOP Indicator AOP Registration No ChgS015XG0 5673-GD1 AOP Indicator AOP Registration No ChgS015XHL 5673-GDR AOP Indicator AOP Registration No ChgS015XL1 5673-GDY AOP Indicator AOP Registration No ChgS015XFS 5673-GP1 AOP Indicator AOP Registration No ChgS015XFK 5673-GPS AOP Indicator AOP Registration No ChgS015XJM 5673-GSD AOP Indicator AOP Registration No ChgS015XFG 5673-GSO AOP Indicator AOP Registration No ChgS015XH6 5673-HA1 AOP Indicator AOP Registration No ChgS015XK7 5673-HAA AOP Indicator AOP Registration No ChgS015XGC 5673-HAC AOP Indicator AOP Registration No ChgS015XHV 5673-HBR AOP Indicator AOP Registration No ChgS015XGS 5673-HGR AOP Indicator AOP Registration No ChgS015XK6 5673-HME AOP Indicator AOP Registration No ChgS015XHR 5673-HPA AOP Indicator AOP Registration No ChgS015XHH 5673-HPC AOP Indicator AOP Registration No ChgS015XK2 5673-HTC AOP Indicator AOP Registration No ChgS015XHF 5673-HVA AOP Indicator AOP Registration No Chg



S015XFW 5673-HVD AOP Indicator AOP Registration No ChgS015XL6 5673-IAE AOP Indicator AOP Registration No ChgS015XHT 5673-ID1 AOP Indicator AOP Registration No ChgS015XJT 5673-IMA AOP Indicator AOP Registration No ChgS015XKC 5673-KE1 AOP Indicator AOP Registration No ChgS015XKN 5673-KIN AOP Indicator AOP Registration No ChgS015XFN 5673-KT1 AOP Indicator AOP Registration No ChgS015XFD 5673-KWA AOP Indicator AOP Registration No ChgS015XFP 5673-KWE AOP Indicator AOP Registration No ChgS015XJ2 5673-LG1 AOP Indicator AOP Registration No ChgS015XG4 5673-LMG AOP Indicator AOP Registration No ChgS015XG3 5673-LO1 AOP Indicator AOP Registration No ChgS015XJ7 5673-MBG AOP Indicator AOP Registration No ChgS015XKH 5673-MLG AOP Indicator AOP Registration No ChgS015XG9 5673-MMG AOP Indicator AOP Registration No ChgS015XGG 5673-MPA AOP Indicator AOP Registration No ChgS015XG7 5673-MPG AOP Indicator AOP Registration No ChgS015XKB 5673-MSG AOP Indicator AOP Registration No ChgS015XJR 5673-MTD AOP Indicator AOP Registration No ChgS015XH5 5673-NCG AOP Indicator AOP Registration No ChgS015XHM 5673-NG1 AOP Indicator AOP Registration No ChgS015XJW 5673-NVG AOP Indicator AOP Registration No ChgS015XH4 5673-PD1 AOP Indicator AOP Registration No ChgS015XFX 5673-PDG AOP Indicator AOP Registration No ChgS015XJJ 5673-PEO AOP Indicator AOP Registration No ChgS015XFB 5673-PFD AOP Indicator AOP Registration No ChgS015XJG 5673-PG1 AOP Indicator AOP Registration No ChgS015XFM 5673-PH1 AOP Indicator AOP Registration No ChgS015XHS 5673-PHS AOP Indicator AOP Registration No ChgS015XFF 5673-PID AOP Indicator AOP Registration No ChgS015XKF 5673-PIP AOP Indicator AOP Registration No ChgS015XH8 5673-PKT AOP Indicator AOP Registration No ChgS015XGF 5673-PLO AOP Indicator AOP Registration No ChgS015XGH 5673-PMG AOP Indicator AOP Registration No ChgS015XJV 5673-PSO AOP Indicator AOP Registration No ChgS015XG1 5673-PX1 AOP Indicator AOP Registration No ChgS015XJ1 5673-QSR AOP Indicator AOP Registration No ChgS015XL9 5673-RBM AOP Indicator AOP Registration No ChgS015XFR 5673-RCD AOP Indicator AOP Registration No ChgS015XKR 5673-RM1 AOP Indicator AOP Registration No ChgS015XK1 5673-RSO AOP Indicator AOP Registration No ChgS015XHJ 5673-RT1 AOP Indicator AOP Registration No ChgS015XJ6 5673-RTR AOP Indicator AOP Registration No ChgS015XGL 5673-SDD AOP Indicator AOP Registration No ChgS015XL2 5673-SDI AOP Indicator AOP Registration No ChgS015XJ5 5673-SFD AOP Indicator AOP Registration No ChgS015XJK 5673-SH1 AOP Indicator AOP Registration No ChgS015XKV 5673-SM1 AOP Indicator AOP Registration No ChgS015XGB 5673-SMD AOP Indicator AOP Registration No ChgS015XKX 5673-SMG AOP Indicator AOP Registration No ChgS015XH9 5673-SP1 AOP Indicator AOP Registration No ChgS015XK8 5673-SPA AOP Indicator AOP Registration No ChgS015XGW 5673-SPE AOP Indicator AOP Registration No ChgS015XFT 5673-SR1 AOP Indicator AOP Registration No ChgS015XL0 5673-SRT AOP Indicator AOP Registration No ChgS015XG6 5673-SSR AOP Indicator AOP Registration No ChgS015XG8 5673-STC AOP Indicator AOP Registration No ChgS015XH2 5673-STL AOP Indicator AOP Registration No ChgS015XL8 5673-SXT AOP Indicator AOP Registration No ChgS015XJN 5673-TG1 AOP Indicator AOP Registration No ChgS015XJZ 5673-TL1 AOP Indicator AOP Registration No ChgS015XJX 5673-TUB AOP Indicator AOP Registration No ChgS015XFV 5673-TUD AOP Indicator AOP Registration No ChgS015XGZ 5673-VOA AOP Indicator AOP Registration No ChgS015XGD 5673-WAV AOP Indicator AOP Registration No ChgS015XKL 5673-WD1 AOP Indicator AOP Registration No ChgS015XG5 5673-WGD AOP Indicator AOP Registration No ChgS015XHC 5673-WS1 AOP Indicator AOP Registration No Chg



5671-KD3 CATIA Business Process Knowledge Definition 3 Configuration

S015Z9P 5673-ANL AOP Indicator AOP Registration No ChgS015Z9M 5673-ATH AOP Indicator AOP Registration No ChgS015Z9N 5673-IAE AOP Indicator AOP Registration No ChgS015Z9J 5673-ICM AOP Indicator AOP Registration No ChgS015Z9R 5673-IEX AOP Indicator AOP Registration No ChgS015Z9L 5673-RBM AOP Indicator AOP Registration No ChgS015Z9K 5673-SXT AOP Indicator AOP Registration No Chg

5671-MD1 CATIA - Mechanical Design 1 Configuration

S015Z8K 5673-ANL AOP Indicator AOP Registration No ChgS015Z8S 5673-ATH AOP Indicator AOP Registration No ChgS015Z8N 5673-IAE AOP Indicator AOP Registration No ChgS015Z8P 5673-ICM AOP Indicator AOP Registration No ChgS015Z8R 5673-IEX AOP Indicator AOP Registration No ChgS015Z8M 5673-RBM AOP Indicator AOP Registration No ChgS015Z8L 5673-SXT AOP Indicator AOP Registration No Chg

5671-MD2 CATIA - Mechanical Design 2 Configuration

S015ZBB 5673-ANL AOP Indicator AOP Registration No ChgS015ZBC 5673-ATH AOP Indicator AOP Registration No ChgS015ZBD 5673-IAE AOP Indicator AOP Registration No ChgS015ZBG 5673-ICM AOP Indicator AOP Registration No ChgS015ZBF 5673-IEX AOP Indicator AOP Registration No ChgS015ZB8 5673-RBM AOP Indicator AOP Registration No ChgS015ZB9 5673-SXT AOP Indicator AOP Registration No Chg

5671-ME1 CATIA - Mechanical Engineering 1 Configuration

S015ZHP 5673-ANL AOP Indicator AOP Registration No ChgS015ZHS 5673-ATH AOP Indicator AOP Registration No ChgS015ZHM 5673-IAE AOP Indicator AOP Registration No ChgS015ZHN 5673-ICM AOP Indicator AOP Registration No ChgS015ZHR 5673-IEX AOP Indicator AOP Registration No ChgS015ZHV 5673-RBM AOP Indicator AOP Registration No ChgS015ZHT 5673-SXT AOP Indicator AOP Registration No Chg

5671-ME2 CATIA - Mechanical Engineering 2 Configuration

S015ZFS 5673-ANL AOP Indicator AOP Registration No ChgS015ZFP 5673-ATH AOP Indicator AOP Registration No ChgS015ZFT 5673-IAE AOP Indicator AOP Registration No ChgS015ZFW 5673-ICM AOP Indicator AOP Registration No ChgS015ZFR 5673-IEX AOP Indicator AOP Registration No ChgS015ZFX 5673-RBM AOP Indicator AOP Registration No ChgS015ZFV 5673-SXT AOP Indicator AOP Registration No Chg

5671-MO2 CATIA - Mold & Die Machinist 2 Configuration

S015ZG6 5673-ANL AOP Indicator AOP Registration No ChgS015ZGC 5673-ATH AOP Indicator AOP Registration No ChgS015ZG8 5673-IAE AOP Indicator AOP Registration No ChgS015ZGD 5673-ICM AOP Indicator AOP Registration No ChgS015ZG9 5673-IEX AOP Indicator AOP Registration No ChgS015ZGB 5673-RBM AOP Indicator AOP Registration No ChgS015ZG7 5673-SXT AOP Indicator AOP Registration No Chg

5671-MS2 CATIA - Mechanism Simulation 2 Configuration

S015ZJ6 5673-ANL AOP Indicator AOP Registration No ChgS015ZJ4 5673-ATH AOP Indicator AOP Registration No ChgS015ZJB 5673-IAE AOP Indicator AOP Registration No Chg



S015ZJ8 5673-ICM AOP Indicator AOP Registration No ChgS015ZJ9 5673-IEX AOP Indicator AOP Registration No ChgS015ZJ5 5673-RBM AOP Indicator AOP Registration No ChgS015ZJ7 5673-SXT AOP Indicator AOP Registration No Chg

5671-PL2 CATIA - Plant Layout 2 Configuration

S015ZJ3 5673-ANL AOP Indicator AOP Registration No ChgS015ZHX 5673-ATH AOP Indicator AOP Registration No ChgS015ZHZ 5673-IAE AOP Indicator AOP Registration No ChgS015ZHW 5673-ICM AOP Indicator AOP Registration No ChgS015ZJ1 5673-IEX AOP Indicator AOP Registration No ChgS015ZJ2 5673-RBM AOP Indicator AOP Registration No ChgS015ZJ0 5673-SXT AOP Indicator AOP Registration No Chg

5671-PM2 CATIA - Prismatic Machinist 2 Configuration

S015ZJL 5673-ANL AOP Indicator AOP Registration No ChgS015ZJP 5673-ATH AOP Indicator AOP Registration No ChgS015ZJN 5673-IAE AOP Indicator AOP Registration No ChgS015ZJR 5673-ICM AOP Indicator AOP Registration No ChgS015ZJS 5673-IEX AOP Indicator AOP Registration No ChgS015ZJM 5673-RBM AOP Indicator AOP Registration No ChgS015ZJT 5673-SXT AOP Indicator AOP Registration No Chg

5671-RE2 CATIA - Reverse Engineering 2 Configuration

S015ZFZ 5673-ANL AOP Indicator AOP Registration No ChgS015ZG2 5673-ATH AOP Indicator AOP Registration No ChgS015ZG1 5673-IAE AOP Indicator AOP Registration No ChgS015ZG3 5673-ICM AOP Indicator AOP Registration No ChgS015ZG5 5673-IEX AOP Indicator AOP Registration No ChgS015ZG0 5673-RBM AOP Indicator AOP Registration No ChgS015ZG4 5673-SXT AOP Indicator AOP Registration No Chg

5671-RM2 CATIA - Preparation Machinist 2 Configuration

S015ZFF 5673-ANL AOP Indicator AOP Registration No ChgS015ZF9 5673-ATH AOP Indicator AOP Registration No ChgS015ZFD 5673-IAE AOP Indicator AOP Registration No ChgS015ZFB 5673-ICM AOP Indicator AOP Registration No ChgS015ZFC 5673-IEX AOP Indicator AOP Registration No ChgS015ZF7 5673-RBM AOP Indicator AOP Registration No ChgS015ZF8 5673-SXT AOP Indicator AOP Registration No Chg

5671-RP2 CATIA - Preparation Prismatic Machinist 2 Configuration

S015ZGF 5673-ANL AOP Indicator AOP Registration No ChgS015ZGG 5673-ATH AOP Indicator AOP Registration No ChgS015ZGL 5673-IAE AOP Indicator AOP Registration No ChgS015ZGK 5673-ICM AOP Indicator AOP Registration No ChgS015ZGM 5673-IEX AOP Indicator AOP Registration No ChgS015ZGH 5673-RBM AOP Indicator AOP Registration No ChgS015ZGJ 5673-SXT AOP Indicator AOP Registration No Chg

5671-SA2 CATIA - Structural Analysis 2 Configuration

S015ZH9 5673-ANL AOP Indicator AOP Registration No ChgS015ZH5 5673-ATH AOP Indicator AOP Registration No ChgS015ZH7 5673-IAE AOP Indicator AOP Registration No ChgS015ZHC 5673-ICM AOP Indicator AOP Registration No ChgS015ZHB 5673-IEX AOP Indicator AOP Registration No ChgS015ZH6 5673-RBM AOP Indicator AOP Registration No ChgS015ZH8 5673-SXT AOP Indicator AOP Registration No Chg



5671-SBD CATIA - Solid Based Design 2 Configuration

S015ZHJ 5673-ANL AOP Indicator AOP Registration No ChgS015ZHD 5673-ATH AOP Indicator AOP Registration No ChgS015ZHH 5673-IAE AOP Indicator AOP Registration No ChgS015ZHK 5673-ICM AOP Indicator AOP Registration No ChgS015ZHG 5673-IEX AOP Indicator AOP Registration No ChgS015ZHF 5673-RBM AOP Indicator AOP Registration No ChgS015ZHL 5673-SXT AOP Indicator AOP Registration No Chg

5671-SD2 CATIA - Sheetmetal Design 2 Configuration

S015ZF5 5673-ANL AOP Indicator AOP Registration No ChgS015ZF0 5673-ATH AOP Indicator AOP Registration No ChgS015ZF4 5673-IAE AOP Indicator AOP Registration No ChgS015ZF6 5673-ICM AOP Indicator AOP Registration No ChgS015ZF3 5673-IEX AOP Indicator AOP Registration No ChgS015ZF2 5673-RBM AOP Indicator AOP Registration No ChgS015ZF1 5673-SXT AOP Indicator AOP Registration No Chg

5671-SL3 CATIA - Aerospace Sheetmetal Design 3 Configuration

S015ZDW 5673-ANL AOP Indicator AOP Registration No ChgS015ZDZ 5673-ATH AOP Indicator AOP Registration No ChgS015ZDV 5673-IAE AOP Indicator AOP Registration No ChgS015ZDX 5673-ICM AOP Indicator AOP Registration No ChgS015ZDR 5673-IEX AOP Indicator AOP Registration No ChgS015ZDS 5673-RBM AOP Indicator AOP Registration No ChgS015ZDT 5673-SXT AOP Indicator AOP Registration No Chg

5671-SO2 CATIA - FreeStyle Optimizer 2 Configuration

S015ZK1 5673-ANL AOP Indicator AOP Registration No ChgS015ZJZ 5673-ATH AOP Indicator AOP Registration No ChgS015ZK2 5673-IAE AOP Indicator AOP Registration No ChgS015ZJW 5673-ICM AOP Indicator AOP Registration No ChgS015ZJV 5673-IEX AOP Indicator AOP Registration No ChgS015ZJX 5673-RBM AOP Indicator AOP Registration No ChgS015ZK0 5673-SXT AOP Indicator AOP Registration No Chg

5671-XM1 CATIA - Extended Mechanical Design 1 Configuration

S015ZH3 5673-ANL AOP Indicator AOP Registration No ChgS015ZH0 5673-ATH AOP Indicator AOP Registration No ChgS015ZGZ 5673-IAE AOP Indicator AOP Registration No ChgS015ZGX 5673-ICM AOP Indicator AOP Registration No ChgS015ZH1 5673-IEX AOP Indicator AOP Registration No ChgS015ZH4 5673-RBM AOP Indicator AOP Registration No ChgS015ZH2 5673-SXT AOP Indicator AOP Registration No Chg

5671-XM2 CATIA - Extended Mechanical Design 2 Configruation

S015ZJC 5673-ANL AOP Indicator AOP Registration No ChgS015ZJK 5673-ATH AOP Indicator AOP Registration No ChgS015ZJG 5673-IAE AOP Indicator AOP Registration No ChgS015ZJD 5673-ICM AOP Indicator AOP Registration No ChgS015ZJF 5673-IEX AOP Indicator AOP Registration No ChgS015ZJJ 5673-RBM AOP Indicator AOP Registration No ChgS015ZJH 5673-SXT AOP Indicator AOP Registration No Chg

5671-YM1 CATIA - Styled Mechanical Design 1 Configuration

S015ZK6 5673-ANL AOP Indicator AOP Registration No ChgS015ZK3 5673-ATH AOP Indicator AOP Registration No ChgS015ZK9 5673-IAE AOP Indicator AOP Registration No Chg



S015ZK5 5673-ICM AOP Indicator AOP Registration No ChgS015ZK4 5673-IEX AOP Indicator AOP Registration No ChgS015ZK7 5673-RBM AOP Indicator AOP Registration No ChgS015ZK8 5673-SXT AOP Indicator AOP Registration No Chg

5671-YM2 CATIA - Styled Mechanical Design 2 Configuration

S015ZGT 5673-ANL AOP Indicator AOP Registration No ChgS015ZGN 5673-ATH AOP Indicator AOP Registration No ChgS015ZGW 5673-IAE AOP Indicator AOP Registration No ChgS015ZGV 5673-ICM AOP Indicator AOP Registration No ChgS015ZGP 5673-IEX AOP Indicator AOP Registration No ChgS015ZGS 5673-RBM AOP Indicator AOP Registration No ChgS015ZGR 5673-SXT AOP Indicator AOP Registration No Chg

Product ordering using legacy systems


• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

To order a standard configuration or shareable product, specify the:

• Configuration/shareable product program number

• Appropriate charge option (PLC and RLC)

• The user quantity

Note: The configurator will automatically add to your order:

• The appropriate billing feature numbers

• The appropriate SPO information

To order a custom configuration, specify:

• The standard configuration program feature number

• The appropriate charge option (PLC and RLC)

• The user quantity

• The AOPs (applies to Process Detailing and Validation only)

Note: The configurator will automatically add to your order:

• The AOP indicator codes and AOP PIDs

• The appropriate billing feature numbers

• The appropriate SPO information




Chargeoption Description

5691-I3D CATIA 3D Insight 2 Configuration

PLC I3D CfgRLC User 1-9 I3D CfgRLC User 10-25 I3D CfgRLC User 26+ I3D Cfg

5691-IRE CATIA ICEM Shape Design Reverse Engineering 2 Configuration

PLC IRE CfgRLC User 1-9 IRE CfgRLC User 10-25 IRE CfgRLC User 26+ IRE Cfg

5691-ISD CATIA ICEM Shape Design Real Time Renderer 2 Configuration

PLC ISD CfgRLC User 1-9 ISD CfgRLC User 10-25 ISD CfgRLC User 26+ ISD Cfg

5691-ISX CATIA ICEM Shape Desigh Center & Expert 2 Configuration 5691-ISX

PLC ISX CfgRLC User 1-9 ISX CfgRLC User 10-25 ISX CfgRLC User 26+ ISX Cfg



PLC IAE ProdRLC User 1-9 IAE ProdRLC User 10-25 IAE ProdRLC User 26+ IAE Prod


PLC IEX ProdRLC User 1-9 IEX ProdRLC User 10-25 IEX ProdRLC User 26+ IEX Prod


PLC SXT ProdRLC User 1-9 SXT ProdRLC User 10-25 SXT ProdRLC User 26+ SXT Prod


5691-ANL SIMULIA Nonlinear Structural Analysis Product

PLC ANL ProdRLC User 1-9 ANL Prod



RLC User 10-25 ANL ProdRLC User 26+ ANL Prod

5691-ATH SIMULIA Thermal Analysis 5691-ATH

PLC ATH ProdRLC User 1-9 ATH ProdRLC User 10-25 ATH ProdRLC User 26+ ATH Prod


PLC RBM ProdRLC User 1-9 RBM ProdRLC User 10-25 RBM ProdRLC User 26+ RBM Prod

New CATIA V5 AOPs


PLC IAE AOPRLC User 1-9 IAE AOPRLC User 10-25 IAE AOPRLC User 26+ IAE AOP

5693-ICM CATIA ICEM Shape Design Center 2

PLC ICM AOPRLC User 1-9 ICM AOPRLC User 10-25 ICM AOPRLC User 26+ ICM AOP


PLC IEX AOPRLC User 1-9 IEX AOPRLC User 10-25 IEX AOPRLC User 26+ IAE AOP


PLC SXT AOPRLC User 1-9 SXT AOPRLC User 10-25 SXT AOPRLC User 26+ SXT AOP

New SIMULIA V5 AOPs


PLC ANL AOPPLC User 1-9 ANL AOPRLC User 10-25 ANL AOPRLC User 26+ ANL AOP


PLC ATH AOPRLC User 1-9 ATH AOPRLC User 10-25 ATH AOPRLC User 26+ ATH AOP




PLC RBM AOPRLC User 1-9 RBM AOPRLC User 10-25 RBM AOPRLC User 26+ RBM AOP

Basic machine-readable material


• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

Only configurations ship supplies because configurations are prerequisites for allshareable products and add-on products. An exception is those few products thathave standalone supplies. For each configuration ordered, the ShopPLM configuratorwill add the 5628-CV5 system program order (SPO) and assign an entitlement entitynumber for the orderable supply.

New orderable supplies

5628-CV5 orderable Distributionsupply ID Language medium Description

S01609D All(1) CD-ROM 3D Insight Design 2 Cf (5671-I3D)S016098 All(1) CD-ROM ICEM Shp Dsgn Rev Engng 2 Cf (5671-IRE)S01609B All(1) CD-ROM ICEM Shp Dsgn Rl Tm Rnd 2 Cf (5671-ISD)S01609G All(1) CD-ROM ICEM Shp Dsgn C&E 2Cf (5671-ISX)

(1) French, German, Japanese, and Italian

Withdrawn orderable supplies

Effective February 16, 2010, the following orderable supplies are withdrawn:

S013N2P All(1) CD-ROM CATIA V5 Tolerance Analysis Deform Assembly 3 Cf

(1) French, German, Japanese, and Italian


• France,

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom



System program orders (SPOs)

CATIA V5 programs for all platforms (UNIX and Microsoft Windows) are shippedunder the 5628-ACN SPO. The SPO is required for all program shipments and futureupdates.

Initial orders placed for a program type 5691 without a corresponding order or MESfor the 5628-ACN SPO will either fail order validation or will not generate a mediashipment. Each customer number must have its own SPO.

New 5628-ACN program function codes

The following no-charge program function codes are used with the 5628-ACN systemprogram order. These function codes are used for shipment of media.

5628-ACN FunctionDescription code 3D Insight Design 2 Cf (5691-I3D) 2405ICEM Shp Dsgn Rev Engng 2 Cf (5691-IRE) 2406ICEM Shp Dsgn Rl Tm Rnd 2 Cf (5691-ISD) 2407ICEM Shp Dsgn C&E 2Cf (5691-ISX) 2408

Withdrawn 5628-ACN program function codes

Effective February 16, 2010, the following orderable supplies are withdrawn:

5628-ACN FunctionDescription code CATIA V5 Tol Analysis Deform Assembly 3 Cf 1991

Initial orders

When ordering the first 5691 configuration for CATIA V5, an order must also beplaced for the 5628-ACN SPO. Both the 5691 program order and the SPO must befor the same CPU system type/system number and must have the same scheduledshipment date.

Subsequent orders

The SPO must have a feature number for every CATIA V5 configuration that isinstalled or on-order. Therefore, when a configuration that was not previouslyinstalled is ordered, the SPO must be updated.

• To update an on-order system: When a license for a new 5691 program is orderedfor an on-order system, the 5628-ACN SPO must be updated to reflect the featurenumber of the licensed program desired. Also, for asset registration and billingpurposes an order for the individual licensed program type 5691 is required.

• To update an installed system: When a license for a new 5691 program is orderedfor an installed system, the 5628-ACN SPO must be updated to reflect the featurenumber of the licensed program desired.



5628-ACN media feature number

Feature DistributionEnvironment number medium

All platforms 3410 CD-ROM

Publications


• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

One English softcopy collection kit (SK3T-4124) is automatically included in allshipments. National Language Versions (NLVs) of the softcopy publications inFrench, German, Italian, and Japanese will be available after general availability atno charge. Customers of record can order one additional kit per license by ordering:

5671-NL2 Optional Softcopy Collection Kit

and selecting the appropriate orderable supply ID in ShopPLM to choose thelanguage.


• France

• Germany

• Ireland

• Italy

• Portugal

• South Africa

• Spain

• United Kingdom

One English softcopy collection kit (SK3T-4124) is automatically included in allshipments. National Language Versions (NLVs) of the softcopy publications inFrench, German, Italian, and Japanese will be available after general availability atno charge. Customers of record can order one additional kit using product identifier5628-ACN and the features below:

FeaturePublication number

CATIA V5 Sftcpy Col Kt ENG 7100CATIA V5 Sftcpy Col Kt FRA 7101CATIA V5 Sftcpy Col Kt DEU 7102CATIA V5 Sftcpy Col Kt JPN 7103CATIA V5 Sftcpy Col Kt ITA 7108

By using the following form numbers, additional softcopy collection kits can beordered through the IBM Publication Ordering System

http://www.ibm.com/e-business/linkweb/publications/servlet/pbi.wss

http://www.ibm.com/e-business/linkweb/publications/servlet/pbi.wss



CATIA V5 Softcopy Collection Kit - English (SK3T-4124)CATIA V5 Softcopy Collection Kit - French (SK3T-4125)CATIA V5 Softcopy Collection Kit - German (SK3T-4126)CATIA V5 Softcopy Collection Kit - Japanese (SK3T-4127)CATIA V5 Softcopy Collection Kit - Italian (SK3T-0575)

Global Technology Services

Contact your IBM representative for the list of selected services available in yourcountry, either as standard or customized offerings for the efficient installation,implementation, and integration of this product.

Terms and conditions

Location license applies

No

Use limitation applies

Yes, as implemented by the license management model described.

The license management model

CATIA V5 license management model. CATIA controls the number of concurrentusers of a CATIA configuration or product, according to the number of license keysacquired for the configuration or product.

CATIA V5 delivers identical license management mechanisms on UNIX and Windowsenvironments, based on IBM License Use Management (LUM). The following licensemanagement principles apply:

• A CATIA V5 configuration (standard or custom) will require a license key.License keys for CATIA V5 configurations are acquired and released for the totalconfiguration. The products within a configuration cannot be shared.

• Each CATIA V5 shareable product will require a license key, in addition to one forthe prerequisite configuration and any prerequisite product, if applicable.

• In all cases, CATIA configuration license keys are acquired at the beginning of theprocess and are released at its termination.

• CATIA V5 add-on (AOP) and shareable products may require license keys forprerequisite products that are not already included in a standard configuration.Prerequisites for shareable products can be satisfied by a standard configuration,by an AOP within a custom configuration, or by a shareable product. However,because all add-on products are defined within one custom license key, any AOPprerequisites must be satisfied by either a standard configuration or by otherAOPs purchased and defined within the same custom configuration.

CATIA V5 can be used in three license management modes: nodelock, withconcurrent usage of license keys on a network, or concurrent offline licensemanagement.

Nodelock usage: The use of a local display is mandatory for CATIA V5 usage innodelock mode. There is no limit to the number of CATIA V5 processes launched fora given license key (configuration or product). For instance, a user can launch thefollowing simultaneous processes:

• A V5 interactive session

• A V5 process executed through an OLE container application

• Replay of macros recorded from captured sequences of V5 user interactions

In the nodelock mode of operation, only one CATIA license key per configurationand shareable product can be registered per machine, and only one CATIA user



can run at a time on that machine. If multiple license keys per configuration orshareable product, or multiple users on a single machine, are required, refer to theConcurrent usage section.

Concurrent usage: A user on one machine on one display uses one license key perconfiguration or shareable product used, regardless of the number of processes. Ifthe display changes, then an additional license key is taken for the correspondingprocess.

Dynamic license management: CATIA shareable product license keys can beacquired and released during the session. (The ability to acquire and release licensesis not available for configurations.) Shareable license keys acquired at the beginningof the session cannot be released before the end of the session; only license keysdynamically granted upon user request during the session can be released duringthe session.

Concurrent offline license management: A concurrent license key controltechnique is available via the LUM server. It gives CATIA, ENOVIA DMU, DELMIA,and RADE applications running on a Windows laptop the ability to disconnect fromthe license key server for a specific period of time. During the checkout period, theserver license key is unavailable for use by another concurrent user. This feature isdesigned to add additional flexibility to a user's work environment. It is offered toaccommodate short-term travel needs and collaboration while away from a fixedoffice environment or server connection. All ICA terms and conditions, includingcross-border licensing terms, are unchanged, and users will check-out and check-in license keys at their home server, where rules and procedures are controlled byLUM.

Note to users of the following ENOVIA SmarTeam-branded CATIAintegration products:

• SmarTeam - CATIA Team PDM Configuration (TDM)

• SmarTeam - CATIA Integration Product (CAI)

• SmarTeam - CATIA Web Team PDM Configuration (TDW)

These ENOVIA SmarTeam products do not support dynamic or concurrent offlinelicense management. Licenses for these products are acquired dynamically when thefunction is invoked from CATIA and may not be released until the CATIA session isended.

Educational allowance available

The standard educational allowance does not apply to CATIA V5 products. However,these products are available in several configurations under the CATIA HigherEducation Academic Training (HEAT) program. Refer to Education support section fordetails.

Volume orders

Contact your IBM representative.

Warranty applies

Yes

Licensed program materials availability

Restricted Materials of IBM: None Non-Restricted Source Materials: None Object Code Only (OCO): All



Program Services

Program Services offer a method of reporting code-related problems for CATIA V5licensed software products. Program Services are available electronically using theproblem submission process at the PLM Technical Support web site at:

http://www.ibm.com/software/applications/plm/support/

Note: In order to use this facility, you must use an IBM ID which has associated toit the licensed IBM customer number under which the product was purchased. If youhave not yet obtained an IBM ID, visit

http://www.ibm.com/account/profile/

If you have not yet associated the licensed IBM customer number to your IBM ID,you will be prompted to do so when accessing the problem submission facility.

When using Program Services, the problem report is submitted via the PLM TechnicalSupport web site; all subsequent communications will be via email. The responsetime for these problem reports, regardless of the severity, will be within twobusiness days. All communications must be in English.

Not all options of the Product Lifecycle Management (PLM) technical support e-services are available in all countries.

If the problem reported is not determined to be a code-related problem, thecustomer will be informed that work will continue on it provided the customerhas ECSR (Electronic Customer Support Representative) Enhanced Support. Foradditional information about the Enhanced Support contract and other available PLMservices offerings visit


Click on the Support Offerings link under Buying and managing support orcontact your PLM marketing representative or authorized IBM Business Partner formore information.

Preventive Service is delivered through the next release of CATIA V5 products. Thenew release also includes corrections to problems, depending on the time of theirsubmission and their severity.

During the Program Services period, Corrective Service for CATIA V5 releasesis delivered through service packs on a regular basis. A service pack includescorrections for Blocking Problems in production systems reported on this release andall corrections available for all components at the time it is built. Service packs areprovided at the same time for all platforms currently supported. Each service packsupersedes the previous one and may be installed on top of the released level or ontop of a previous service pack.

Customers may request a correction via a service pack for Blocking Problems. ABlocking Problem is defined as:

• A problem that stops production: The customer is currently using the level forwhich a fix is requested in a production environment.

• A problem that prevents migration: The customer must provide the migrationplan.

• A problem that halts testing of a given level: A fix will allow customer to continuethe testing.

• Installation problem: A problem that prevents the customer from installing orusing the product.

• Regression: Problems reported as regressions may be due to an operation thatwas being performed erroneously or created incorrect data with a previous releaseand the current release no longer permits these operations. Therefore, eachproblem reported as a regression must be evaluated. True regressions will behandled as Severity 1 problems.


http://www.ibm.com/account/profile/




Note: Customers experiencing problems with IBM License Use Management (LUM)products when used with CATIA V5 products may report these problems throughPLM product support. Note this only applies when the LUM product is being usedin conjunction with a CATIA V5 product and the CATIA product is within its supportperiod. LUM products are not included in the enhanced support offering; LUMproblems will receive the Program Services level of support and must be submittedvia the Problem Reporting process at the PLM Technical Support web site at


Program Services will be provided for this release of CATIA V5 products (V5.20) untilOctober 19, 2012. After that date, should it be necessary for customers who areup-to-date on their Annual License Charge (ALC) payments to extend support, asupport extension will be available for an additional fee.

This extension is for 1 year only, with no possibility of renewal, and will be limitedto support of critical situations found in production running on an announced,supported environment and subject to the availability and maintainability ofOperating Systems, databases, middleware and hardware (clients and servers) atthe time the critical situation is reported. Critical situation means a Severity 1 defectthat is blocking production and has no workable alternative to unblock production.

In order to ensure uninterrupted support, support extension requests should besubmitted at least 6 months prior to the end of support date through the customer'smarketing team or Business Partner.

This extension of support will not constitute an alternative to the customer'smigration to the latest release or version of the installed products and therefore thecustomer is obligated to have a documented and viable migration plan to the latestrelease or version in order to obtain an extension of support.

For a list of all currently supported releases of PLM products, visit


On the left under Choose your task select Planning, then on the subsequent pageunder Plan an upgrade, select PLM Software End of Support Dates.

Note that Product Lifecycle Management must be added to your list of productsotherwise the PLM portlets will not be displayed.

Prices

For all local charges, contact your IBM representative.

Use level authorization: Charges are based on extent of use authorized for thisprogram. When a customer wishes to increase the extent of use, an applicablecharge will apply.

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers toassist them in acquiring IT solutions. Offerings include financing for IT acquisition,including hardware, software, and services, from both IBM and other manufacturersor vendors. Offerings (for all customer segments: small, medium, and largeenterprise), rates, terms, and availability can vary by country. Contact your localIBM Global Financing organization or visit

http://www.ibm.com/financing

IBM Global Financing offerings are provided through IBM Credit LLC in the UnitedStates, and other IBM subsidiaries and divisions worldwide to qualified commercialand government customers. Rates are based on a customer's credit rating, financing






terms, offering type, equipment type, and options, and may vary by country. Otherrestrictions may apply. Rates and offerings are subject to change, extension, orwithdrawal without notice.

For more financing information, visit


Announcement countries

All European, Middle Eastern and African countries.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corporation in theUnited States, other countries, or both.

Tracer and DB2 Universal Database are trademarks of IBM Corporation in the UnitedStates, other countries, or both.

IBM, AIX, POWER, DB2, WebSphere and MQSeries are registered trademarks of IBMCorporation in the United States, other countries, or both.

UNIX is a registered trademark of The Open Group in the United States and othercountries.

Intel, Pentium and Xeon are registered trademarks of Intel Corporation or itssubsidiaries in the United States and other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in theUnited States, other countries, or both.

PostScript is a registered trademark of Adobe Systems Incorporated in the UnitedStates, and/or other countries.

Other company, product, and service names may be trademarks or service marks ofothers.

Terms of use

IBM products and services which are announced and available in your countrycan be ordered under the applicable standard agreements, terms, conditions,and prices in effect at the time. IBM reserves the right to modify or withdraw thisannouncement at any time without notice. This announcement is provided foryour information only. Reference to other products in this announcement does notnecessarily imply those products are announced, or intend to be announced, in yourcountry. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBMrepresentative or reseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/


http://www.ibm.com/legal/us/en/

http://www.ibm.com/planetwide/

Documents

CATIA V5.20: Virtual design for product excellence