Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
1
Fenster und Türen
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
1
CATALOGUE OF WOODEN WINDOWS AND DOORS
www.nagode.si
Top quality manufacturing from Slovenia
windows and doors
22
WINDOWS AND DOORS NAgODE
WINDOWS • newbuildings• adaptations• renovationsofheritage-listedconstructionworks
DOORS• entrancedoors• garagedoors–doubleand
liftingdoors
Windows and doors for your home
Slovenian product
competitiveness
energy savings
reliability
quality
33
WOODEN WINDOWS
44
NAGODE classic
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install double or triple panes of glass with thermal insula-tion Ug from 2.9 to 0.80 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden shims to increase the constructional strength of the sash.It is fixed on the internal and external sides with silicone, which is trimmed after application.
gLAZINg BARSWe perform installations of concealed glazing bars.
SEALTwo permanent elastic Q-Lon weatherstrips are integrated into the window as standard.
ROUNDED EDgESSoft rounded edges on the frame and
sash provide an elegant look. They enable a uniform and quality application
of the end coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally
friendly water-based coatings. The possibility to choose two-coloured
paintwork; a different colour on the outside and on the inside.
WOOD
The window profile is 68 mm thick, made from three layers of wood glued
together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed
wood.
SASH DRIP PROFILEIt is installed as standard at the lower
part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the
window from the weather. Designed with a thermal element.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of
moisture.VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
68
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
The thickness of the window frame is 68mm, the profiles are glued from three layers of unjointed wood, which provides optimum strength and stability of the product.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/16/4Ug = 1,1
ALU 1,31
TGI 1,24
Super Spacer 1,21
4/16/4 Ug = 1,0
ALU 1,25
TGI 1,18
Super Spacer 1,15
4/12/4 KrUg = 0,9
ALU 1,18
TGI 1,11
Super Spacer 1,08
55
NAGODE rustic 6868
HARDWAREThe quality German GU hardware
enables all possible ways of opening. The possibility to choose safety or
concealed hardware.Standard installation of the micro-
ventilation element.
gLASSIt is possible to install double panes of glass with thermal insulation Ug from
2.9 to 0,90 W/m2K.
gLASS SPACERSSYou can choose between the
aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden
shims to increase the constructional strength of the sash. It is fixed on
the internal and external sides with silicone, which is trimmed after
application.
gLAZINg BARSWe also provide installations of stylish
concealed glazing bars.
SEALTwo permanent elastic Q-Lon
weatherstrips are integrated into the window as standard.
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
The wooden window with its rounded edges in a special style is a product which can be adapted to the internal and external architecture due to its unique design.
Rustic is a window which has an emphasized baroque style profile instead of the rounded edges. It is suitable for protected buildings.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/16/4Ug = 1,1
ALU 1,31
TGI 1,24
Super Spacer 1,21
4/16/4 Ug = 1,0
ALU 1,25
TGI 1,18
Super Spacer 1,15
4/12/4 KrUg = 0,9
ALU 1,18
TGI 1,11
Super Spacer 1,08
ROUNDED EDgESThe stylish rounded edges of the frame and sash provide a rustic look.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside. WOOD The window profile is 68mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILEThe window is installed as standard without a sash drip profile. It can be installed upon request.
WOODEN DRIP EDgEThe wooden drip bar emphasizes the rustic look of the window. It is attached to the aluminium drip profile with a thermal element.
PROTECTION OF THE V-JOINTSBefore applying a thick layer end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
66
NAGODE superior 78
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
The window is manufactured from a 78mm thick profile, made from four layers of longitudinally unjointed wood and glued together. It is distinguished by its good thermal insulation and structural stability.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/12/4/12/4Ug = 0,70
ALU 1,00
TGI 0,93
Super Spacer 0,90
4/16/4/16/4 Ug = 0,60
ALU 0,93
TGI 0,86
Super Spacer 0,83
4/18/4/18/4Ug = 0,50
ALU 0,86
TGI 0,80
Super Spacer 0,76
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden shims to increase the constructional strength of the sash.It is fixed on the internal and external sides with silicone, which is trimmed after application.
gLAZINg BARSWe perform installations of concealed glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
ROUNDED EDgESSoft rounded edges on the frame and
sash provide an elegant look. They enable a uniform and quality application
of the end coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally
friendly water-based coatings. The possibility to choose two-coloured
paintwork; a different colour on the outside and on the inside.
WOOD
The window profile is 78 mm thick, made from three layers of wood glued
together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed
wood.
SASH DRIP PROFILEIt is installed as standard at the lower
part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the
window from the weather.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of
moisture.
77
NAGODE energy saving 9090
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
The window has exceptional properties – it is energy saving and its 90mm thick window frame enables excellent structural stability and high thermal insulation.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/12/4/12/4Ug = 0,70
ALU 0,97
TGI 0,90
Super Spacer 0,87
4/16/4/16/4 Ug = 0,60
ALU 0,90
TGI 0,83
Super Spacer 0,80
4/18/4/18/4Ug = 0,50
ALU 0,83
TGI 0,76
Super Spacer 0,73
ROUNDED EDgESSoft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside. WOOD The window profile is 90 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILEIt is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the window from the weather.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
HARDWAREThe quality German GU hardware
enables all possible ways of opening. The possibility to choose safety or
concealed hardware. Standard installation of the micro-ventilation
element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug
from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber
implementation of the Super Spacer.
gLAZINgThe installed glass is lined with
wooden shims to increase the constructional strength of the sash.
It is fixed on the internal and external sides with silicone, which
is trimmed after application.
gLAZINg BARSWe perform installations of concealed
glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon
seals. It is possible to add a fourth seal.
88
NAGODE energy saving 102
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
Energy-saving window – the 102mm thick window frame provides excellent structural stability and high thermal insulation.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/12/4/12/4Ug = 0,70
ALU 0,94
TGI 0,87
Super Spacer 0,84
4/16/4/16/4 Ug = 0,60
ALU 0,88
TGI 0,81
Super Spacer 0,78
4/18/4/18/4Ug = 0,50
ALU 0,81
TGI 0,74
Super Spacer 0,71
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden shims to increase the constructional strength of the sash.It is fixed on the internal and external sides with silicone, which is trimmed after application.
gLAZINg BARSWe perform installations of concealed glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
ROUNDED EDgESSoft rounded edges on the frame and
sash provide an elegant look. They enable a uniform and quality application
of the end coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally
friendly water-based coatings. The possibility to choose two-coloured
paintwork; a different colour on the outside and on the inside.
WOOD
The window profile is 102 mm thick, made from three layers of wood glued
together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed
wood.
SASH DRIP PROFILEIt is installed as standard at the lower
part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the
window from the weather.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of
moisture.
99
NAGODE energy saving 110110
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
The window with the 110mm thick window frame is suitable for installation into low-energy facilities, since it boasts structural stability and insulation.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
4/12/4/12/4Ug = 0,70
ALU 0,93
TGI 0,86
Super Spacer 0,83
4/16/4/16/4 Ug = 0,60
ALU 0,87
TGI 0,80
Super Spacer 0,77
4/18/4/18/4Ug = 0,50
ALU 0,80
TGI 0,73
Super Spacer 0,70
ROUNDED EDgESSoft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside. WOOD The window profile is 110 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILEIt is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the window from the weather.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
HARDWAREThe quality German GU hardware
enables all possible ways of opening. The possibility to choose safety or
concealed hardware. Standard installation of the micro-ventilation
element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug
from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber
implementation of the Super Spacer.
gLAZINgThe installed glass is lined with
wooden shims to increase the constructional strength of the sash.
It is fixed on the internal and external sides with silicone, which
is trimmed after application.
gLAZINg BARSWe perform installations of concealed
glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon
seals. It is possible to add a fourth seal.
1010
NAGODE pro Thewindowismadefromtermallymodifiedwood.
Theprocedureisuniqueandhightechandprovidesprecisecontrolofthereactionsthattakeplaceinthewoodduringthemodificationprocess.
Thetechnologyenablestimeeffectivemodificationofmosttypesofconiferousanddeciduouswoodaccordingtopredefinedprogrammes.Duetoinnovativesolutionsthesmellofmodifiedwood(thesmellofcharcoal)issignificantlylesspronounced,andalltheresinisremovedfromthewood.Besidessolidwood,wecanalsomodifytheveneer.
Changesinthestructureofthewoodmacromoleculesintheprocessoftermalmodificationarearesultofspontaneousthermochemicalreactionswhichtakeplaceduringtheheatingofthewoodattemperaturesbetween170°Cin230°CCwithouttheadditionofothersubstancesorchemicalreagents.Thiswaythe“operation”(expansionandcontraction)ofthewoodisreducedby50%andthedurabilityisenhanced.
Theresistanceoflow-resistanceconiferouswoodimprovestoclass2(standardSISTEN350-2),wherenaturallyresistantoakandsimilarwoodcanbefound.
Termallymodifiedwoodcanbeusedoutdoorswithoutadditionalprotection.
THERMALLy MODIFIED WOOD
CHARACTERISTICS OF HEAT-TREATED WOOD:(comparedtonatural,untreatedwood)
•improveddimensional stability of the wood (upto50%reducedexpansionandcontractionofthewood)
•improvednatural resistance to pests
•reduced balancedmoisture content of the wood
• uniform colour throughouttheentirecrosssection
•100 % peopleandenvironmentfriendly
• exotic looking wood
•longer lifespanevenwhenusingoutdoors
SPRUCE LARCH OAK
TESTED AT THE
BIOTECHNICAL FACULTY,
UNIVERSITY OF LJUBLJANA
1111
WOODEN WINDOW NAGODE pro 68
IMPLEMENTATION IN ALL THICKNESSES: 68 78 90 102 110
VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
68
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES
NAGODE pro is made of thermally modified wood. It is completely natural window that does not require any additional protection.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
Profil 684/16/4
Ug = 1,0
ALU 1,19
TGI 1,12
Profil 784/12/4/12/4
Ug = 0,70
ALU 0,95
TGI 0,88
Profil 904/12/4/12/4
Ug = 0,70
ALU 0,92
TGI 0,85
Profil 1024/16/4/16/4
Ug = 0,60
ALU 0,82
TGI 0,75
Profil 1104/18/4/18/4
Ug = 0,50
ALU 0,74
TGI 0,67
ROUNDED EDgESSoft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. WOOD The window profile is 68 mm thick, made from three layers of wood glued together. Our own manufacture assures selected and quality wood. Manufactured exclusively from longitudinally unjointed wood.
SASH DRIP PROFILEIt is installed as standard at the lower part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the window from the weather. Designed with a thermal element.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
HARDWAREThe quality German GU hardware
enables all possible ways of opening. The possibility to choose safety or
concealed hardware. Standard installation of the micro-ventilation
element.
gLASSIt is possible to install double or triple
panes of glass with thermal insula-tion Ug from 2.9 to 0.80 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber
implementation of the Super Spacer.
gLAZINgThe installed glass is lined with
wooden shims to increase the constructional strength of the sash.
It is fixed on the internal and external sides with silicone, which
is trimmed after application.
gLAZINg BARSWe perform installations of concealed
glazing bars.
SEALTwo permanent elastic Q-Lon
weatherstrips are integrated into the window as standard.
12
90
Uf=0,78W/m2K
12
WOODEN PASSIVE WINDOWNAGODE pasivtherm
NAGODE pasivtherm 90ismadeofgluedwindowprofileswithintegratedthermalinsulation.Weofferamodernenergy-savingwoodenwindow.
ThePASIVTHERMsystemwindowframeboastsathermaltransmittancefactor,whichisenhancedby40%comparedtosolidgluedwindowframes.
ProperallocationofsolidwoodareasandareaswithinsulationinthewindowprofileofthePASIVTHERMwindowprovideshighstrength,stabilityandtorsionalstiffnessofthewindow.
ADVANTAgES OF PASIVTHERM WINDOWS:
• The thinnest passive wooden window on the market • It is also possible to implement the aluminium/wood coat-
ing: the PROTECT 4 or PROTECT 5 programme• The thermal transmittance of the frame is enhanced by 40%• Solid angular joint• Ecological insulating fillers are not visible• Hard polyurethane foam does not contain CFCs and
HCFCs• The insulation contains a polyol component, which is pro-
duced from rapeseed oil.• Environmentally-friendly and energy-saving• Contributes to a healthier living environment
VIEW FROM THE OUTSIDE
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden shims to increase the constructional strength of the sash.It is fixed on the internal and external sides with silicone, which is trimmed after application.
gLAZINg BARSWe perform installations of concealed glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
ROUNDED EDgESSoft rounded edges on the frame and
sash provide an elegant look. They enable a uniform and quality application
of the end coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally
friendly water-based coatings. The possibility to choose two-coloured
paintwork; a different colour on the outside and on the inside.
WOOD
The window profile is 90mm thick, made from four layers of wood glued together
and filled with rigid polyurethane foam, which increases the thermal conductivity
of the frame by 40%. Manufactured exclusively from longitudinally unjointed
wood.
SASH DRIP PROFILEIt is installed as standard at the lower
part of the sash to extend the durability of the window.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the
window from the weather.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of
moisture.
POLyURETHANE FOAMPrecision manufacturing provides excel-lent thermal insulation of the profile.
13
110
Uf=0,76W/m2K
13
WOODEN PASSIVE WINDOWNAGODE hibridtherm
NAGODE hibridterm 110hasastandardthree-layerglazingwithathermaltransmittanceofUg=0,70 W/m2KandaSuperSpacerbetweenthesheetsofglass(j=0,027W/mK),whichfurtherenhancesthethermalcharacteristicsoftheglass.Wecanoptionallyuseglazingwithlowerheattransmittance,whichenhancesthethermalcharacteristics.AninnovativeAEROGEL SPACELOFT®,nanotechnologicalinsulatingmaterialisintegratedbetweenthelayers,whichimprovesthethermaltransmittance.
CERTIFICATE FOR PASSIVE WINDOWSThecriteriaforthethermaltransmittanceofdoorsandwindowsfortheinstallationinpassivehousesweredefinedbythePassiveHouseInstituteinDarmstadt;Germany.Theinstituteistheleadingforcefordefiningstandardsandpromotingpassiveconstruction.Weareproudtohaveacquiredthiscertificate,whichprovesthequalityofourfurniture.
Tomarkawindowaspassive,theframe andtheglass mustmeetcertainconditions,namely the frame must have Uf ≤ 0,80 W/m2KandtheglassUg = 0,70 W/m2K. Ifbothconditionsaremet,thetotalvalueofthewindowmustbeUw ≤ 0,80 W/m2K.Takingallthisintoaccount,itisalsoimportantthattheintegratedwindowmeetsthecriterionoftheinstallationUw ≤ 0,85 W/m2K.
Calculationsalwaysconsiderthestandardizedsampledimensionofthewindow,123×148cm,andthethermaltransmittanceoftheglassUg=0,70W/m2K.
MAIN CHARACTERISTICS OF THE AEROgEL SPACELOFT®:
• Thethermalconductivityisonly0.013 W/m2K,whichisanuptoeighttimesbetterinsulationvalueforthesamethicknesscomparedtostandardmaterials.
• Excellentfireresistanceandresistanceagainstthespreadofflamesandsmokeemissions.
• Permanentlyhydrophobicmaterialathightemperatures.• Excellentsoundinsulationatlowfrequencies.• Resistanttocompression,shock-
absorbing.Thecontractionofthematerialislessthan1%after20years.
• Nohealthhazards;doesnotcontaincarcinogensandallergenicsubstances.
• Environmentallyfriendlymaterial,whichdoesnotchemicallycompromisetheenvironment.Restrictsinfraredradiation.Itcanbedisposedofatlandfillsandisnotradioactive.
14
90
68
14 VIEW FROM THE OUTSIDE
VIEW FROM THE OUTSIDE
ALU-CLAD/WOOD WINDOWNAGODE protect 4
68 78 90 102 110IMPLEMENTATION IN ALL THICKNESSES:
90
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES Aluminium on the outside and wood on the inside represents a merger of the finest properties.
Wood brings warmth to the interior rooms, while the outside is protected against the weather.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
Profil 684/16/4
Ug = 1,0
ALU 1,25
TGI 1,18
Profil 784/12/4/12/4
Ug = 0,70
ALU 1,00
TGI 0,93
Profil 904/12/4/12/4
Ug = 0,70
ALU 0,97
TGI 0,90
Profil 1024/16/4/16/4
Ug = 0,60
ALU 0,88
TGI 0,81
Profil 1104/18/4/18/4
Ug = 0,50
ALU 0,80
TGI 0,73
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
gLASS SPACERS You can choose between the aluminium, PVC or rubber implementation of the Super Spacer.
gLAZINgThe installed glass is lined with wooden shims to increase the constructional strength of the sash.It is fixed on the internal and external sides with silicone, which is trimmed after application.
gLAZINg BARSWe perform installations of concealed glazing bars.
SEALThe window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal.
ROUNDED EDgESSoft rounded edges on the frame and
sash provide an elegant look. They enable a uniform and quality application
of the end coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally
friendly water-based coatings. The possibility to choose two-coloured
paintwork; a different colour on the outside and on the inside.
PROTECT 4 ALU MASK
Completely protects the window from the weather. Wide variety of colour shades
and wood decors.
CORNER JOINTSThe corner joints are welded or riveted.
Due to the technical properties of aluminium, riveted corner joints are
required for larger elements.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of
moisture.
15
78
15VIEW FROM THE OUTSIDE
VIEW FROM THE INSIDE
ALU-CLAD/WOOD WINDOWNAGODE protect 5 7878
IMPLEMENTATION IN THICKNESSES: 68 78 90 102 110
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES Aluminium on the outside and wood on the inside represents a merger of the finest properties. Wood brings warmth to the interior rooms, while the outside is protected against the weather.
Innovative solution without the internal glazing bar – for an elegant look.
Thermal transmittance for spruce windows in accordance
with the standard SIST EN 14351-1
Glass [W/m2K]
Spacer [W/mK]
Uw[W/m2K]
Profil 684/16/4
Ug = 1,0
ALU 1,25
TGI 1,18
Profil 784/12/4/12/4
Ug = 0,70
ALU 1,00
TGI 0,93
Profil 904/12/4/12/4
Ug = 0,70
ALU 0,97
TGI 0,90
Profil 1024/16/4/16/4
Ug = 0,60
ALU 0,88
TGI 0,81
HARDWAREThe quality German GU hardware
enables all possible ways of opening. The possibility to choose safety or
concealed hardware. Standard installation of the micro-ventilation
element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug
from 0.7 to 0.50 W/m2K.
gLAZINg The level of integrated glass is aligned with the wooden part of the sash. The
exterior aluminium mask and the seal rest against the glass. The outside
is additionally sealed with silicone.
gLASS SPACERSYou can choose between aluminium
or PVC implementation.
gLAZINg BARSAn innovative system without the
internal glazing bar.
SEALThree permanent elastic seals are
installed in the windows as standard. It is possible to add a fourth seal.
ROUNDED EDgESSoft rounded edges on the frame and sash provide an elegant look. They enable a uniform and quality application of the end coating.
SURFACE TREATMENT Three- or four-system surface protection of the wood with environmentally friendly water-based coatings. The possibility to choose two-coloured paintwork; a different colour on the outside and on the inside. PROTECT 5 ALU MASK Completely protects the window from the weather. Wide variety of colour shades and wood decors.
CORNER JOINTSThe corner joints are welded or riveted. Due to the technical properties of aluminium, riveted corner joints are required for larger elements.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end coating, all the V-joints are additionally protected by a special elastic sealant for protection against the ingress of moisture.
16
78
16
HARDWAREThe quality German GU hardware enables all possible ways of opening. The possibility to choose safety or concealed hardware. Standard installation of the micro-ventilation element.
gLASSIt is possible to install triple panes of glass with the thermal insulation Ug from 0.7 to 0.50 W/m2K.
gLASS SPACERS Are optionally available in ALU or PVC material.
gLAZINgThe silicone is only visible on the inner side of the window.
gLAZINg BARSAn innovative system without the internal glazing bar.
SEALThe window is equipped as standard with three permanent elastic Q-Lon seals. It is possible to add a fourth seal. gLUED gLASSThe built-in glass is glued to the framework, which increases the structural strength of the sash.
VIE
W F
ROM
TH
E O
UTS
IDE
VIE
W F
ROM
TH
E IN
SID
E
gLASS/WOOD WINDOWNAGODE trend 78
IMPLEMENTATION IN THICKNESSES: 68 78 90 102 110
78
ROUNDED EDgESSoft rounded edges on the frame and sash
provide an elegant look. They enable a uniform and quality application of the end
coating.
SURFACE TREATMENT
Three- or four-system surface protection of the wood with environmentally friendly
water-based coatings. The possibility to choose two-coloured paintwork; a different
colour on the outside and on the inside.
WOOD The window profile is 78mm thick and
made from four layers of wood glued togeth-er. Our own manufacture assures selected
and quality wood. Manufactured exclusively from longitudinally unjointed wood.
ENAMELLED gLASS EDgEThe special version of the external 6mm
thick tempered and enamelled glass provides a modern window. The standard
enamelling colours are black, anthracite and white.
PROTECTION OF THE V-JOINTSBefore applying a thick layer of end
coating, all the V-joints are additionally protected by a special elastic sealant for
protection against the ingress of moisture.
FRAMEWORK DRIP PROFILEIt protects the most exposed parts of the
window from the weather.
TheNAGODE trendsystemcanbeupgradedwithaluminiumcladontheNAGODE protect 5 frames.
DESCRIPTION OF THE WINDOW AND ITS ADVANTAgES A Modern window, which only has visible glass on the outside of the casement and no wood, which simplifies maintenance.
An innovative solution without the internal glazing bar – for an elegant look.
VIEW FROM THE OUTSIDE
1717
PANORAMIC WINDOWS
18
68 78
TimbErsTEp 68 78 90 110
TErmOsTEp
A
C
D
E
F
g1
g1
H
K
L18
LIFT-SLIDE WINDOWS
PossibleimplementationwithaluminiumcladNAGODE protect 4 or NAGODE protect 5.
OPENINg IMPLEMENTATIONS
DESCRIPTION OF BENEFITS
The lift and slide windows enables unlimited architectural solutions considering the width and height of the implementation. It is distinguished by a unique solution with a low threshold and opens easily.
TECHNICAL SPECIFICATIONSGU HS 934
• sash weight up to 300 kg• sash width 700-3300 mm• sash height 1851-3250 mm
symmetrical
a symmetrical
1919
FOLD-SLIDE WINDOWS
OPENINg IMPLEMENTATIONS
high
woo
den
thre
shol
d –
pass
age
97 m
m
low
alu
min
ium
thre
shol
d –
pass
age
18 m
m
DESCRIPTION OF BENEFITS
The fold and slide windows has a classic high wooden threshold or a low sunken aluminium threshold.Due to the way of the opening it enables the maximum width of the gateway.
TECHNICAL SPECIFICATIONSROTO patio 6080
• sash weight up to 80 kg• sash width 450-900 mm• sash height Flügels 800-2400 mm
20
A
A
C
C
g
g
K20
PARALLEL-SLIDE AND TILT WINDOWS
Parallel-slideandturnhardwareGU-966/100oZbb.Apracticalsolutionforalivingcomfortwithoutanyobstructionsonthefloorandasimpleuse:thefloorthresholdheightisonly20mm.
DESCRIPTION OF BENEFITS
Parallel-slide and tilt windows can feature a high wooden or low aluminium threshold as well as provides ventilation in the hung version of the sash.
In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.
GU PSK 966/150oZ• sash weight up to 130 kg• sash width 640-1600 mm• sash height 700-2350 mm
GU PSK 966/100oZ bb-Alu-threshold• sash weight up to 100 kg• sash width 640-1600 mm• sash height 700-2350 mm
GU PSK 966/150mZ• sash weight up to 150 kg• sash width 720-2000 mm• sash height 820-2370 mm
GU PSK 966/200mZ• sash weight up to 200 kg• sash width 720-2000 mm• sash height 820-2370 mm
TECHNICAL SPECIFICATIONS TRADITIONAL OPENINg
TECHNICAL SPECIFICATIONS AUTOMATIC OPENINg
OPENINg IMPLEMENTATIONS
21
A
A
C
C
D
g
g
K
A
A
C
C
D
G
G
K21
PARALLEL-SLIDE WINDOWS
DESCRIPTION OF BENEFITS
The parallel-slide windows features a high wooden threshold. It allows for a simple opening since no turn feature is installed.In the heavier variant with a sash weight of up to 200kg it provides automatic opening and closing via a handle.
TECHNICAL SPECIFICATIONS TRADITIONAL OPENINg GU PS 966/200oZ - no turn feature• sash weight up to 200 kg• sash width 640-2000 mm• sash height 730-2350 mm
OPENINg IMPLEMENTATIONS
2222
SURFACE PROTECTION
DURAFLEX TECHNOLOgy: EXCELLENT JOININg OF WOOD AND COATINgTheDuraflexsystemcanhelpusachieveoptimumdurability.Duetothepermanentelasticlayertheproduct–especiallyincaseoftemperaturechanges–itoptimallyadjuststothesurface.Theinnovativeagentforprotectionagainstlightenableshighandlong-lastingprotectionofthecoatingagainstUVradiation.Excellentpermeablepropertiesofthelayerprovideexceptionallygoodretentionofmoistureinthewood.Duetoitsproperties,theDuraflexcoatingsystemprovidesahighresistanceagainsttheweather.
WE PROTECT THE SURFACE OF THE DOORS AND WINDOWS IN 4 STEPS:
Thewater-basedtransparentcoating,whichhasa250micronsdryapplication,hasexceptionalelasticandresistancefeaturesforprotectionagainstweatherconditionsandmechanicalstresses.
Application3–INTERMEDIATEThiseffectivelyclosestheporesinthewood,formsabondinglayerandregulatesthemoistureinthewood.Aftertreatmentthesurfaceisclosedanduniformlyeven.
Application2–PRIMEREffectivelyworksagainstbluestainfungusinthewood.Itisdistinguishedbythehighcapacityofequalizingthecolourshadeofthewoodsurfaces(equalisation)atasimultaneoushighpurity(transparency)ofthecolourtone.
Application 1 – IMPREGNATIONAcolourlessimpregnation,whichworksagainstwood-decayfungi.Itisdistinguishedbytheabilityofdeeppenetrationintothestruc-tureofthewoodandthestrengtheningofthestructure.Itprotectswoodagainstmoisture.
Application4–FINALTHICKLAYEROFCOATING,optionallyDURAFLEX
Î
2323
OUTER SHADES – SHUTTERS
KEEP yOUR HOUSE BEAUTIFUL
Shuttersgiveaspecificcharactertothehouse.Theimplementationispossiblewithdifferentopeningmethods–theshutterscanhaveone,two,threeorfourwingsandcanbeswitched.
Weusetwoversionsofhardware–thesimpleJadro200hardwareinblackorgreyandtheelegantFentrohardwareinblackorwhite.
movinglouvres
fixedlouvres
fullontwofillers
fullononefiller
Okoumé-laminatedpanel
5-levelopeningoftheshutterswithmovinglouvres
2424
ENTRANCE DOORS
25
MV010 MV011 MV012 MV013 MV014
MV020 MV021 MV022 MV030 MV040
MV050 MV055 MV090 MV100 MV110
MV120 MV150 MV160 MV180 MV211 25
DOOR MODELS
26
MV210 MV200 MV300 MV350 MV380
FV411 FV412 FV413 FV414 FV420
FV421 FV450 FV455 FV500 FV501
FV502 FV503 FV504 FV505 FV54026
DOOR MODELS
27
FV541 FV542 FV545 FV560 FV580
FV590 FV600 FV610 FV620 FV625
FV630 FV631 FV640 FV680 FV690
FV650sMV100sMV100sn FV500n 27
DOOR MODELS
2828
REFERENCES
2929
REFERENCES
3030
REFERENCES
3131
REFERENCES
3232
Tržaška cesta 64 1370 Logatec
Slovenia
01/1
5EN
Prod
uctio
n:a
genc
ija@
citr
us.s
i
You are kindly invited to our showroom.
Advice and orders:
+ 386 1 75 09 676
Preparation of pro forma invoices:
+ 386 1 32 00 676
Technology:
+ 386 1 75 09 677
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
okna in vrata
NAGODEwww.nagode.si
windows and doors