Catalogue Leborgne 2014 - English version

group

Just work, we care.Mieux équipé, mieux protégé.Besser ausgerüstet, besser geschützt.

Catalogue 2014Professional distribution

Leb_Cat2014_Cov210x297Eng.indd 1 08/01/2014 10:22:37

2 I Leborgne® Catalogue 2014 I Corporate


SummaryProfessional distribution

Leborgne® p. 03

Introduction p. 03History p. 03Sustainable development p. 04Innovation p. 05Recognized design p. 05Health in building and construction p. 06Acting to prevent work strain p. 06Backed by experts p. 07Leborgne® recognition p. 07

Nanovib® Range p. 08

Bricklaying and Construction Tools p. 12

Claw Hammers p. 13Club Hammers p. 14Sledge Hammers p. 14Hatchet p. 15

Forged/Heavy Work Tools p. 16

Spikes, Chisels p. 17Miner's Bar p. 17Heel Bars, Bolt Cutters p. 18Nippers, Hammer Scraper, Prop Key p. 19Miscellaneous Tools p. 20

Groundwork/Roadwork tools p. 21

Shovels, Picks p. 22Rakes, Spreaders p. 23Concrete Scraper, Tamper p. 24

Tools for Wood Frame Houses p. 25

Wood Frame House Builder Range p. 26Hammers p. 28

Accessories p. 29

Hammer Holder p. 30Belt p. 30

Merchandising p. 31

Safety p. 34


Corporate I Leborgne® Catalogue 2014 I 3

Leborgne®

We have been designing and manufacturing hand toolsfor professionals in France since 1829.

The excellence of Leborgne® tools is expressed through their innovative design and durability. More than ever Leborgne® now focusses on protecting the health of craftsmen and contractors by acting to reduce work strain. Leborgne® joined the Fiskars Group in 2007. Since its creation in a small Finnish village called Fiskars in 1649, the company has become an international group, present in more than 60 countries on four continents. Leborgne® has its roots and heart firmly planted in Savoie, where the Arvillard and La Rochette plants achieved ISO14001 environmental certification in 2012.

History 1173 Foundation in Savoie of the Monastery of St Hugon where the Carthusian monks forged the swordsand axes used by knights duringthe Crusades 1 .

1829 The Leborgne family acquiresthe blast furnace at St Hugon 2 . 1863 Leborgne® manufactures several thousandshovels used to excavate the Suez Canal 3 . 1878 Leborgne® tools are highly prized throughout Europe, and at the Universal Exhibitions in Parisof 1855 and 1878 4 . 1880 The Lumière brothers produce the first photographic catalogue for Leborgne® tools 5 . 2007 Leborgne® joins the Fiskars Group.

2

1 5

3

4

Leborgne®, the trademark of the Fiskars Group for Construction professionals, is number one in France in spontaneous brand recognition of hammers and other hand tools (according to an IPSOS survey produced in 2010 for Fiskars®). Leborgne® tools will progressively become available on all European markets.

Leborgne® - number one in France in spontaneous brand recognition of hammers and other hand tools. ”



Sustainable Development"Sustainable development is development that meets current needs without affecting the ability of future generationsto meet theirs."(United Nations Commission for the Environmentand Development, "Our Common Future" report 1987)

The significant first results of our processand commitments are:• the marketing of a new range of Nanovib® tools

to improve working conditions,• the use of first choice recycled steel and wood

from FSC or PEFC certified forests,• the ISO14001 certification of our Savoie plants,• movement and posture training and work station

adaptation,• the setting up of an Older People and Male/Female Equal Opportunities action plan,• our participation in common projects with our

stakeholders ("La Route du Fer"),• the signing of an ethical charter by our employees

and suppliers.

Leborgne® sustainable development process is part of a long-term view and involves a highly operational approach. Supported by the Okoumé Conseil consultancy since 2010, we set up a sustainable development and social responsibility committee to reduce our social and environmental impact. This year Leborgne® made eight commitments under three heads.

1 Reducing the impact of our organizationand products on the environment:• reduce our overall energy demand

(distribution, purchasing, production),• valorize and recycle our waste,• eco-design our innovative tools.

2 Promoting social responsibilityin our value chain:• encourage our suppliers to control

their environmental and social impacts,• act according to values and a vision shared

by all employees,• fight against occupational health problems

and accidents.

3 Strengthening our relationshipswith our stakeholders:• develop in harmony with our plant locations,• anticipate and take into account the expectations

of our institutional partners.


winner


InnovationThe Leborgne® production plants(forging, assembly, logistics platform)in Savoie now cover an area of 13,000 m².

In 2012 they obtained ISO14001 environmental certification. This international standard is an important management tool for performance improvement. Leborgne® has its industrial processes under perfect control. Each new tool results from direct collaboration between the Leborgne® Design Office and construction industry professionals: craftsmen, contractors and safety managers.

Innovation is central to our work and global economic development, which is why Leborgne® carefully protects its inventions. Among our tools currently on the market, 20 are patented, proof that they provide "a new technical solution to a given technical problem" (according to the official INPI [French national institute for industrial property] definition).

In 2012 Leborgne® received the Design Management Europe Award (DMEA); our design management system puts the end user at the centre of the product design and innovation process.

Communicate Innovations

AnalyseUses

DefineNeeds

CreateConcepts

TestTools

ManufacturePrototypes

Users

Recognized designLeborgne® tools are set apartby their unique design.

An identifying colour, yellow, a series of broken lines for rigour and strength, curves for comfort and safety: unquestionably, it's a Leborgne® tool. This design is repeated in the typography of the new logo.

Leborgne® tools were present at the French Design Exhibition (Stockholm), at the Saint-Etienne Design Biennale in France. In 2009, the Architect's Plumb Line won the Batimat international tradeshow Design Gold Trophy. In 2010, Leborgne® gained the Design Observer Label for the Magnetic Plumb Line, the Architect's Plumb Line was selected for the Fonds National d’Art Contemporain (French national contemporary art collection).

At the Préventica trade fair, a jury of experts, made of representatives of professional bodies, leading companies and journalists, awarded the Innovation Prize 2013 (Construction category) to the new Leborgne® Nanovib® Bolt-Cutters.

These awards, together with the building trade professionals' fondness for the tools, confirm Leborgne® in its process of product development and its search for innovation.

The design of Nanovib® hammers won the Red Dot Design Award 2013 ”



Health in the construction industryAccording to the INRS (French occupational risk prevention research institute), occupational health problems in the construction industry increased six fold over the last twenty years.

It seemed stabilized in 2006, but the large increase of 2007 continued in 2010. This is due to greater allowance for and better recognition of occupational health problems, especially MusculoSkeletal Disorders and periarticular complaints (shoulder, elbow and wrist) which progressed by 79% over five years. MusculoSkeletal Disorders are now the leading cause of occupational health problems and affect nine out of ten sick leave in the construction industry.

Since the law on pension reform, the requirement to prevent work strain is one of the general principles of occupational risk prevention.These are the relevant European Directives:• 89/391/EEC, measures to encourage improvements

in the safety and health of workers, • 90/269/EEC (and Decree No. 92-958),

requirements for the manual handling of loads,• 2002/44/EEC (and Decree No. 2005-746),

requirements regarding the exposure of workersto vibration.

The issues are referred to by the OPPBTP(French professional safety organization for the construction industry) in its "Work Strain" guide:• the social and ethical requirement to preserve

the health of people at work,• high direct and indirect health costs

(MusculoSkeletal Disorders are the leading causeof absenteeism at work),

• the attractiveness of construction industry tradesand companies.

Acting to preventwork strainWork strain is: "the employee's exposure, throughout their professional career,to one or several risk factors liable to leave lasting traces, that are identifiable and irreversible for health". (Law of 9 November 2010 on pension reformand according to Article L. 4121-3-1 of the Labour Code)

For the better prevention of the risk factors, the single risk assessment document enables a diagnosis to be produced and an action plan to be defined for:• carrying out preventive actions and training,• investing in new adapted equipment.

1 2 3 4 5 6

Leborgne® has designed and manufactured the innovative tools of the Nanovib® range to offer solutions that contribute to reducing the following risk factors(fixed by Decree D. 4121-5 of the Labour Code):1 mechanical vibration,2 repetitive work

characterized by repetition of the same gesture3 manual load handling,4 accidents,5 noise,6 postures.



Backed by expertsWe have sought the advice of safety experts: professional safety bodies, health research and innovation institutes, safety managers of leading Construction companies and contractors as well.This has resulted in the launch of the new range of Nanovib® tools.

On 24 April 2012, Leborgne® signed a partnership agreement with the CAPEB and the IRIS-ST (French institute of research and innovation for health and safety at work) to test and offer companies innovative tools in terms of risk prevention.

Leborgne® recognitionOver ten million estimated contactsin one year across the printed pressand the internet, thanks to a press campaign and active public relations.

Media coverage review 2012Total coverage achieved at 14/02/2013 138

PressNumber of Press articles 67Number of products valorized 79Press distribution 3 ,018, 673Number of estimated contacts 9 ,056, 019

Website/BlogsNumber of Web articles 71Number of products valorized 97Monthly visits communicated * 973 ,549* Many websites/blogs do not give visit numbers.

Total 10, 029, 568Number of website estimated contacts/monthly visits.

A dedicated team in Savoie in France and in Billnäs in Finland specifies high technical requirements and then inspects the chemical, mechanical and vibration characteristics of our tools.

This three-way agreement also ensures the impartiality and objectivity of the results. Leborgne® is also in partnership with the FFB (French building industry federation) and regularly exhibits at its trade fairs.

While there is no standardized test for measuring hammer vibration, unlike portable electric tools, and only one Decree No. 2005-746 of 4 July 2005, Leborgne® has developed a specific test and takes vibration measurements according to ISO5349-1. We are now working with the AFNOR (French standards body) and our colleagues in a standardization project for this test.

We also maintain an active presence in the relevant bodies and attend many discussion meetings to remain close to industry expectations: Cetim, SIO, UNM, Afnor, CCI, Unibal, FEDIYMA, CNDB (relevant French and European bodies).

nanovib

Testez-moi !*

Soyez convaincu ou faites-vous rembourser !

*Achetez un outil de la gamme Nanovib®, testez-le sur votre chantieret si vous n’êtes pas convaincu, nous vous le remboursons !

Offre réservée pour l’achat des références Nanovib® suivantes 123309, 100210, 100220, 100230, 127309, 051249, 127409, 166033, 146510, 146500, 141200, 133700, 494110, 144200, 158229, 603229, 603239, entre le 15/11/2013 et le 15/03/2014.

La demande implique le renvoi de l’outil avant le 15/04/2014.Offre limitée à 1 remboursement par entreprise. Voir modalités complètes sur www.leborgne.fr.

Eti270

Leb_NanRanPro2013_BeaSto95x95Fre_Eti270.indd 1 05/09/2013 15:59:14


LAURÉAT 2013FABRICANT




Cla

w H

amm

er 1

0021

0 H

A210

N

Car

pent

er's

Ham

mer

100

220

HA

220

N

Fram

ing

Ham

mer

100

230

HA

23

0N

Clu

b H

amm

er 1

2330

9 C

H120

N

Tam

per

1660

33 S

R033

N

Sle

dge

Ham

mer

300

0 gr

/6.6

lb 1

2730

9 SH

300

N

Sle

dge

Ham

mer

400

0 gr

/9 lb

127

409

SH

300

N

Pic

k A

xe 0

5124

9 P

K24

9N


Nanovib®

The tools in this range are designedand manufactured to offer solutionsthat efficiently contribute to reducingrisk factors.



Bol

t Cut

ter

6032

29 B

C750

N

Bol

t Cut

ter

6032

39 B

C900

N

Nip

pers

/she

ars

1582

29 P

I220

N

Hee

l bar

146

500

BA

65

0N

Hee

l bar

with

str

aigh

t edg

e 14

6510

BA

65

1N

Ham

mer

Scr

aper

141

200

BA

12

0N

Insu

late

d B

ar 1

3370

0 B

A150

N

Ham

mer

Hol

der

4941

10 B

P11

0N

Pro

p K

ey 1

4420

0 B

A42

0N

VibrationStrenght

LoadSecurity

Noise



HA210N

- 50 %VibrationVibrationsVibrationen

ELV Test2002/44/CEm/s²

Claw Hammer" Mechanical vibration is one of the risks liable to constitute work strain factors ".(Article R.444-1 of the Labour Code)

Vibration that, when transmitted to the human hand-arm system, entails risks to the health and safety of workers, in particular vascular, bone or joint, neurologicalor muscular disorders. Leborgne® in France has designed and manufactured the new Nanovib® hammer to offera solution that contributes to reducing this occupational risk factor.

According to DecreeNo. 2005-746 of 4 July 2005, when a tool exceeds a threshold limit value (ELV) to vibration of 2.5m/s², the employer must set up protection measures for the worker: either to reduce the daily use time of a product, or to make available personal protective equipment for reduction vibration.


Nanovib®

The tools in this range are designedand manufactured to offer solutionsthat efficiently contribute to reducingrisk factors.

Comparative tests demonstrate that the Leborgne® Nanovib® hammer absorbs50 % more vibration compared with the best hammers in its class. ”

While there is no standardized test for measuring hammer vibration, unlike for portable electric tools, Leborgne® has developed, with the expertise of independent specialists, a specific test and takes vibration measurements according to ISO 5349-1.

Use time/day (8h)Min. for TLV < 2.5m/s²

Rival products Leborgne® Hammer

The Leborgne® Nanovib® hammer has a threshold limit value (ELV) to vibration less than 2.5 m/s², which means a contractor can use the Nanovib® hammer for a whole workday (2400 strikes/day). Comparative tests demonstrate that the Leborgne® Nanovib® hammer absorbs 50 % more vibration compared with the best hammers in its class.Leborgne® is now working with the AFNOR (French standards body) on a standardization project for this test. In terms of prevention, with the new Leborgne® Nanovib® claw hammer by acting on vibration intensity you reduce it at source.

0 5 10 15 20 25 30 35 40 mn




BC750N

- 30 %StrainEffortBemühung

GearsDémultiplicationGetribe

Bolt Cutter" Repetitive work characterizedby repetition of the same movement is one of the risks liable to constitute work strain factors ".(Article D. 4121-5 of the Labour Code)

Currently among construction industry activities there are situations where the repetition of the same movement at a rapid rate is required to accomplish a task. These repetitions have delayed effects on the human body which come under the category of MusculoSkeletal Disorders (MSD). Leborgne® in France has designed and manufactured the new Nanovib® bolt cutters to offer a solution that contributes to reducing this occupational risk factor.

Leborgne® Nanovib® bolt cutters reduce muscular effort by 30-60% compared with bolt cutters in its class thanks to the patented compounding gear system. The reduction range is distributed in order to maximize cut efficiency from the start, when most force is required, unlike the "hinge" reduction of standard bolt cutters which is efficient only at the cut end after the bar has already yielded.

Leborgne® Nanovib®

bolt cutters reduce muscular effort by 30-60% compared with bolt cutters in its class thanks to the patented compounded gear system. ”

The expertise of our plant in France allows us to forge the pieces with great accuracy, in respect of the rack compounding curves and resistant enough to bear the cutting forces. The blades are made of forged and tempered (56/62 HRC) chrome vanadium steel.

In terms of prevention, with the new Leborgne® Nanovib® bolt cutters you are acting to reduce the number of repeated movements and to improve the gesture.

Ø 10 mm Peak load (N) Rival products Leborgne® Bolt Cutters0 100 200 300 400 500 600 700 800 N


Bricklaying and Construction ToolsThanks to its expertise and innovations, Leborgne® has always been a leading company for professional Builders’ hammers (source GFK).Our hammers, made of forged and tempered carbon steel, have been developed together with the Safety Managers of major Construction companies to prevent occupational hazards and reduce the risks of worksite accidents. As a specialist in composite handles, Leborgne combines strength and MSD prevention (MusculoSkeletal Disorders) with its Nanovib® handle: increased safety, less vibration.

Leb_Cat2014_InnPag210x297Eng.indd 12 07/01/2014 12:00:26

Products I Leborgne® Catalogue 2014 I 13

Framing Hammers Bricklaying and Construction Tools

Claw Hammers

• Increased safety = less vibration 50% less vibration thanks to the patented Nanovib® system

• Safety = Nanovib® shaft, vibration absorbed and MSD reduced• Strength = tempered steel shaft with high resistance to miss-hits• Ergonomic = three-material shaft• Design- Batimat Design Gold Award 2011- Star of the Observeur du Design 2012- Red Dot Award 2013

Total weightgr/oz

Total heightmm Nanovib®

1000/20 350 100210 HA210N

3157331002108*Magnet Lateral

strikeScraper Durable Ergonomics

ELV Test 2002/44/CE m/s²

Nanovib® Claw Hammer

• Steel miss-hit guard = protects the shaft• Wider handle cross-section for better grip• Shaped shaft end = reduces the risk of losing the hammer• Magnetic nail-holder for single-handed use

without holding the nail

Total heightmm

Head weightgr/oz Novamax®

370 650/20 100016 HA016B

3157331000166*Miss-hit guard

Rounded claws

Rounded edges

Magnet Lateral strike

Novamax® Batipro® Claw Hammer

• For all bricklaying, framing and shuttering work•Lateralstrikefacesforworkinconfinedspaces• Rounded strike faces and claw edges• Magnetic nail-holder for single-handed use

without holding the nail

Total heightmm

Head weightgr/oz Novagrip®

500 650/20 100006 HA006B

3157331000067*Rounded claws

Rounded edges

Magnet Side strike

Batipro® SP4 Claw Hammer Spain



14 I Leborgne® Catalogue 2014 I Products

Club HammersBricklaying and Construction Tools

Club Hammers

• Improved safety = less vibrationThe Nanovib® shaft absorbs vibration and reduces MSD

• Nanovib shaft:- safety = Nanovib® shaft, vibration absorbed and fewer MSD,- ergonomic = widened shaft, comfortable grip• Head = three faces for three functions:- striking = one domed face for lessening the risk of chipping,- scraping = two tempered sharp edges for scraping,- shaping = true sharp edges for breaking stone and block

Total heightmm

Head weightgr/lb Nanovib®

260 1200/2.5 123309 CH120N

3157331233090*Breaking Scraping Striking Ergonomic

handle


Nanovib® Club Hammer

• Three faces for three functions:- striking = one domed face for lessening the risk of chipping,- scraping = two tempered sharp edges for scraping,- shaping = true sharp edges for breaking stone and block

Hauteur totalemm

Poids têtegr/lb Novamax®

260 1000/2.2 123318 CH100B

260 1200/2.5 123308 CH120B

3157331233083*Breaking Scraping Striking

Batipro® Club Hammer

Sledge Hammers


• Safety = Nanovib® shaft, vibration absorbed and fewer MSD• Ergonomics = widened shaft, comfortable grip

Hauteur totalemm

Poids têtegr/lb Nanovib®

800 3000/6.6 127309 SH300N

900 4000/9 127409 SH400N


Rounded edges

Ergonomic handle


Nanovib® Sledge Hammer



Sledge Hammers Bricklaying and Construction Tools

• Miss-hit guard = protects the shaft and reduces vibration• Rounded striking surface edges = delays burring

and lessens the risk of chipping• Lateral faces ideal for driving wood posts without deterioration

Hauteur totalemm

Poids têtegr/lb Novamax®

900 3000/6.6 127304 SH300B

900 4000/9 125464 SH400B

900 5000/11 127504 SH500B


Rounded edges

Batipro® Sledge Hammer

Hatchet

• Multiple-use for carpenters, bricklayers, plasterers, etc.• Nail puller• Magnetic nail-holder• Sharpened edge ready to use• Adjustable edge protector = safe tool storage• Steel miss-hit guard

Total heightmm

Head weightgr

Cutting edgewidth

mmNovamax®

370 750 90 104104 AX104B

3157331041046*Magnet Miss-hit guard

Edge protector

Batipro® Hatchet


Forged/Heavy Work ToolsAlways in the service of professionals, Leborgne® guarantees the quality of its steels which meet European standards EN 10083 and EN 2001.The Batipro® range, exclusive to Leborgne®,satisfiesrigoroustechnicalspecificationstoofferyouthebesttoolonthemarket.By offering lighter tools or tools requiring less user effort, while maintaining high strength, Leborgne contributes to the reduction of worksite strain. In this way Nanovib® tools contribute to making load handling easier, to reducing awkward postures and to reducing sound nuisance.



Spikes Forged/Heavy Work Tools

Spikes

• 300 mm version available with miss-hit guard• For all bricklaying work and possibly shaping soft stone,

not recommended for shaping hard stone• Large diameter reinforced head: delays burring• Steel, manganese and silicon• True cruciform cross-section, remains effective longer

than ordinary octogonal cross-section spikes and chisels:- heat-treated core-hardened steel,- self-sharpening, even tip wear

Total lengthmm

Total weightgr

Diametermm

Withoutmiss-hit guard

With miss-hit guard

250 320 16 131250L SC125B

300 390 16 131300L SC130B 131302L SC132B

350 440 16 131350L SC135B

400 650 18 131400L SC140B

3157331313020*

Cruciform Wide head

Batipro® Self-sharpening Spike

Chisels

• 300 mm version available with miss-hit guard• For all bricklaying work and possibly shaping soft stone,

not recommended for shaping hard stone• Large diameter reinforced head, delays burring• Manganese and silicon steel• True cruciform cross-section, remains effective longer

than ordinary octagonal spikes/chisels:- heat-treated core-hardened steel,- self-sharpening, even tip wear

Total lengthmm

Total weightgr

Diametermm

Withoutmiss-hit guard

With miss-hit guard

250 380 16 132250L SC225B

300 450 16 132300L SC230B 132302L SC232B

350 510 16 132350L SC235B

400 750 18 132400L SC240B

3157331323029*

Cruciform Wide head

Batipro® Self-sharpening Chisel

Miner’s Bar

• Miner’s Bar insulated up to 1000 V20% weight reduction compared with a traditional all-steel crowbar

• Insulated bar can with stand nominal voltage up to 1000 V AC and 1500 V DC (in compliance with standard BS8020)

• Ergonomic = 20 % lighter than traditional all-steel crowbar•Bodyoftheminer’sbar100%fibreglassensuringlifting

capacities up to 1.5 t• Working parts made of forged steel = one pointed side fordiggingandoneflatsideforlevering

Total lengthmm

Total weightgr Part. No.

1500 4500 133700 BA150N

3157331337002*End stop Max. load Max.

thrust

InsulatedBS8020/2002

Nanovib® Insulated Miner’s Bar



Construction BarsForged/Heavy Work Tools

Heel Bars

• The Nanovib® pry bar is three times lighter than is steel counterparts, risks of back MSD prevented

• For levering, positioning, moving and blocking shutting panels and heavy loads in construction, metal framework, handling and industrial maintenance

• Shaft made of high-performance tempered aluminium ensuring capacities of loading, strength and stiffness comparable to steel

• Heel made of forged tempered steel for lifting or aligning loads• Lifting capacity 2 t per heel bar• For lifting 4 t use two heel bars• No more than one person per heel bar

Total lengthmm

Total weightgr/lb Part. No.

1500 3260/7.3 146500 BA650N

3157331465002*

Max. load Max. thrust

Correct use direc-tion

Incorrect use direc-tion

Lifting Aligning

Nanovib® Heel Bar

• The Nanovib® pry bar is three times lighter than is steel counterparts, risks of back MSD prevented

• For levering, positioning, moving, blocking shuttering panels and heavy loads in the building, metal framework, industrial handling and maintenance

• Shaft made of high performance tempered aluminium ensuring capacities of loading, strength and stiffness comparable to steel

•Heelandflatmadeofforgedtemperedsteel• Heel made of forged tempered steel for lifting or shifting loads• Flat side: makes the tool multipurpose, enables work in places

inaccessible with the heel• Lifting capacity 2 t per heel bar• For lifting 4 t use two heel bars• No more than one person per heel bar

Total lengthmm

Total weightgr/lb Part. No.

1670 4700/10.3 146510 BA651N

3157331465101*

Max. load Max. thrust

Correct use direc-tion

Incorrect use direc-tion

Lifting Aligning

Nanovib® Heel Bar with Straight Edge

Bolt cutters

• 30 % less effort thanks to patented rack reduction system

• Optimized 55° blade cutting angle• Blades made of forged

and tempered chrome vanadium steel (56-62 HRC)• Precise jaw adjustment by eccentric screws (36 positions)• Steel tube handle = lightness and strength• Ergonomic two-material handles = comfortable grip• Spare jaws available• Design- Batimat Innovation Award 2013- Préventica Innovation Award 2013

NumberTotal

lengthmm

Total weight

gr

Cutting capacity19 HRCdiameter

mm

Cutting capacity40 HRCdiameter

mm

Part. No. Spare Jaws

2 750 4200 11 9 603229 BC750N 606229

3 900 5300 13 10 603239 BC900N 606239

3157336032292*

Tube handle

Ergono-mics

Eccentric screw

62 HRC/55°

Gears

Nanovib® Bolt Cutters



Nippers Forged/Heavy Work Tools

Nippers

• 50 % less effort thanks to system with high reduction of the lateral shears

• Two tools in one:- nippers for twisting, cutting, binding, - lateral shears: for cutting soft iron wire up to 4 mm diameter• Jaws of the nippers and shears made of forged and tempered

chrome vanadium steel (55 HRC)•Profiledhandles,comfortablegrip

Total length

mm

Total weight

gr

Cutting capacity (shears)Soft wirediameter

mm

Cutting capacity (shears)

Semi-hard wire

diametermm

Cutting capacity (shears)

Hard wirediameter

mm

Cutting capacity (shears) Piano wire

diametermm

Part. No.

220 380 4 3.8 3 2,5 158229 PI220N

3157331582297*

Nippers Shears Strike face

Ø 4 mm

Nanovib® Nippers/Shears

Hammer Scraper

• Lighter and more precise than a traditional miner’s bar• Exclusive to Leborgne®

• Precision• Power• Safety• Strip/clean concrete slab•Adjustafloorslab• Clean concrete runs after shuttering• Pierce openings• Split edges

Total lengthmm


1170 7660 141200 BA120N

3157331412006*Anti-shock system

Piercing Cleaning Splitting

Nanovib® Hammer Scraper

Prop Key

• Eliminates the noise of hammering on strut nuts• Exclusive to Leborgne®

• Universal lever for strut nuts and shoring towers• Replaces the hammer for tightening struts• Reduces sound nuisance• Reduces MSD risks related to hammering

Total lengthmm


650 1250 144200 BA420N

3157331442003*Wingnut Flat nut

Nanovib® Prop Key



Miscellaneous ToolsForged/Heavy Work Tools

Miscellaneous Tools

• Hands free• Wind stability (500 gr)• Length (8000 mm)• Cleaning scraper for residual concrete• Line and weight holding mount

Total lengthmm


8000 580 144772 ME772B

3157331447725*Magnet Scraping Max.

lenght

8m

Weight

0,5 kg

Batipro® magnetic plumb line


Groundwork/Roadwork and Sewerage ToolsLeborgne® has a complete rangeof essential tools for groundwork, roadwork and sewerage.Resulting from partnerships with the HESQ managers of major Construction companies, Leborgne® takes the greatest care with the ergonomics of its tools in order to improve the work and health conditions of workers throughout their careers. The handles on many tools (shovels, rakes, etc.) have therefore been lengthened to reduce awkward postures and the Nanovib® handle is now available on our pick axes for greater safety and less vibration.



Round and square shovelsGroundwork/Roadwork and Sewerage Tools

Shovels

• Stronger fully tempered tool •Straightedges,efficientgroundscraping• Pointed end, better shovel penetration• Footrests, stable foot support, shoes not damaged

Head weightgr

Head heightmm

Head widthmm PEFC wood Compositube®

1050 286 280 005402SV402B

005406SV406B

3157330054061*Straight edges

Footrest

Batipro® Shovel

Picks


• Nanovib® shaft:- ergonomic = widened handle, comfortable grip• Head:- extra-hard cruciform tip,- straightedgeflatfordiggingtrenches,- lateral strike face

Total weightgr/lb

Head heightmm Nanovib®

2250/5 550 051249 PK249N

3157330512493*Lateral strike

Cruciform tip

Straight edges

Ergono-mics


Nanovib® Pick

• Extra-hard diamond cruciform tip for improved wear resistance• Lateral strike face for knocking in stakes•Straightedgeflatforscraping• Novamax® three-material shaft 1000 mm

Head weightgr/lb

Head heightmm

Head widthmm Novamax®

2250/5 550 60 051245 PK245B

3157330512455*Cruciform Lateral

strikeStraight edges

Batipro® Pick (oval socket 50x32 mm)



Forged and miscellaneous rakes Groundwork/Roadwork and Sewerage Tools

Rakes

• Reinforced side teeth and fully tempered comb for more resistance with difficult work

• Reinforced lateral teeth and fully tempered comb = stronger•Tubularsocket=reinforcedshaftfitting• Angular steel levelling plate = facilitates levelling

and consolidates the comb

Head weightgr

Head widthmm Teeth PEFC wood

690 400 14 376102 RA142B

3157333761027*Reinforced teeth

Levelling plate

Batipro® Rake

Spreaders

• Multiple use spreader = both lengthman spreader and tar spreader

• Extra-hard tempered steel folded blade = better resistance to bending and wear, weight saving

• Larger link plate = solidity reinforced• Shaft 1800 mm = spares the back• For heavy coatings 0-14 (roads)

Head weightgr

Head widthmm PEFC wood

1000 500 143442 SR442B

3157331434428*

Batipro® Spreader (tempered steel)

• Extra-hard tempered steel folded blade = better resistance to bending and wear, weight saving

• Larger link plate = reinforced solidity • Hook for lifting mesh before pouring concrete

Head weightgr


1100 500 137182 SR182B

3157331371822*

Batipro® Concrete Spreader (tempered steel)



Concrete ScrapersGroundwork/Roadwork and Sewerage Tools

Concrete Scraper

• For cleaning shuttering panels, scraping concrete slabs• Socket reinforced with two braces for intensive use• Extra-hard tempered blade• Rounded edges = do not scratch the scraped surfaces• Folded blade = choice of two work angles• Shaft 1300 mm = greater scope for cleaning vertical panels

Head weightgr


700 300 142302 SR302B

3157331423026*Rounded edges

Brace Folded blade

Batipro® Scraper

Tamper

• Improved safety, less vibrationThe silent block socket absorbs vibrations and reduces MSD

• For tamping any surface• Sillentbloc socket = vibrations attenuated• Metal shaft = reinforced solidity• Elastomer handle = ergonomic and safe• 3 right angles for tamping in corners• 1 rounded corner = for tamping around obstacles (lamps)

Head weightgr

Head widthmm Part. No.

5000 160 166033 SR033N

3157331660339*Silent block

Rounded edge

5 kg/11 lb


Nanovib® Tamper


Tools for Wood Frame HousesWood is the material of the future! It has many advantages for outside insulation and renovation projects.Essentially it is a natural, durable and renewable material that helps to reduce greenhouse gases. It is quite natural that Leborgne has developed, always in partnership with tradesmen, a new range of essential tools intended for professionals in wood construction or renovation. All these tools have been approved by the CNDB (National Wood Development Committee) and MBOC (Maisons Bois Outils Concept) instructors.



Wood Frame House Builder RangeTools for Wood Frame Houses

Wood Frame House Builder Range

• For adjusting the top part of walls• Fast and accurate telescopic brace:- fast adjustment with notches- accurate micrometric screw adjustment• Consult our website to validate the wind resistance capacity

according to region

Total lengthmm


2000 6300 144700 WH700B

3157331447008*Handles Length

2,3-3

,0m

Plate Plumb adjustment

Batipro® Wall Brace

• For adjusting with precision the bottom part of woof frame house walls

•Fixingonalltypesofsupport(concretefloor,joist,etc.)• Also autonomous use without support• For solid walls and open walls

Total lengthmm


600 1800 144750 WH750B

3157331447503*1. Open walls

1. Solid walls

1. Rotary plate

180˚

Batipro® Wall Levelling Tool

•Foraligningtimberfloorordeckboards• Universal truing tool• Micrometric adjustment of the jaw,

adjustable centre distance 50-110 mm• Interchangeable block and jaw, adaptstothefloorfittingdirection

Total lengthmm


600 1600 144760 WH760B

3157331447602*Interchan-geable blocks

Pulling Pushing Jaw adjustment

50-110mm

Batipro® Board Truing Tool

• Architect’s model, axis and plumb•Wallfixing,freestheuser’shands• Long nylon line (4000 mm)

Total lengthmm


100 440 144770 WH770B

3157331447701*Pierced mount

Max. lenght

4m

Batipro® Architect’s Plumb Line

2. Open walls

2. Solid walls

2. Rotary plate



Wood Frame House Builder Range Tools for Wood Frame Houses

• For setting the space between boards• Two thicknesses (5 mm and 7 mm) on the spacer

Total lengthmm


120 80 144780 WH780B

3157331447800*Spacer thickness5/7 mm

Batipro® Board Spacer 5 mm and 7 mm

• Integral trigger-gate, no need to screw to hold the rule• Easy holding system with trigger-gate• Aluminium rule 45 mm long• Belt hanging clip• Integral pencil• Spirit level• Ergonomic two-material handle

Total lengthmm


300 200 144790 WH790B

3157331447909*Trigger-gate

45 mm Pencil Central slot

45°/90°

Batipro® Combination Square

• Aligning spur adjustable to 45 mm or 60 mm• Multipurpose tool• For nail pulling, levering, scraping, aligning, etc.• Forged tempered steel• Two-position spur 45 mm and 60 mm for aligning wood

Total lengthmm


370 800 145000 WH000B

3157331450008*Spur 45/60 mm

Batipro® Flat Heel Bar with spur

• Two tools in one = batten remover and wrecking bar• Two in one, batten remover with heel bar• Hexagonal section• High strength forged tool

Total lengthmm


540 1600 145010 WH010B

3157331450107*Batten remover

Nail puller

Batipro® Batten Remover



HammersTools for Wood Frame Houses

Hammers

• Increased safety = less vibration50 % less vibration thanks to the patented Nanovib® system

• Safety = Nanovib® shaft, vibration absorbed and fewer MSD• Strength = tempered steel shaft high resistance to miss-hits• Ergonomic = three-material shaft•Efficiency=onepointedclawforhammeringinframe,withspur• Design- Star of the Observeur du Design 2012- Red Dot Design Award 2012

Total lengthmm

Total weightgr/oz Part. No.

350 1000/20 100220 HA220N

3157331002207*Spur Magnet Lateral

strikeScraper Rounded

surfaceDurable Ergono-

mics


Nanovib® Carpenter’s Hammer (one teeth) with spur

• Increased safety = less vibration50% less vibration thanks to the patented Nanovib® system

• Safety = Nanovib® shaft, vibration absorbed and fewer MSD• Strength = tempered steel shaft high resistance to miss-hits• Ergonomic = three-material shaft•Efficiency=spurforaligningwood• Design- Star of the Observeur du Design 2012- Red Dot Design Award 2012

Total lengthmm

Total weightgr/oz Part. No.

350 1000/20 100230 HA230N

3157331002306*Spur Magnet Lateral

strikeScraper Rounded

surfaceDurable Ergono-

mics


Nanovib® Framing Hammer with spur




AccessoriesAccessories: recognized as a hand-tool specialist, Leborgne® has developed a clever range of multipurpose nail pouches combining strength with wear resistance and functionality.



Hammer carrierAccessories/Sets

Hammer Holder

• The anti-loss profile (storage angle 45°) prevents the hammer falling when the operator squats

• Anti-loss sheath• Anti-shock polymer material• Carpenter’s pencil integrated• For right or left handers

Total lengthmm


220 200 494110 BP110N

3157334941107*Pencil holder

Anti-fall

Nanovib® Hammer Holder

Belt

• Soft-lined• Metal hammer-holder•Reflectivesafetystrip

Total lengthmm


1150 500 494020 BP020B

3157334940209*Soft-lined and brea-thable

Adjustable loops

Metal hammer-carrier

Batipro® Comfort Belt


nanovib

HA210N

group

Just work,we care.Mieux équipé, mieux protégé.Besser ausgerüstet, besser geschützt.


- 50%VibrationVibrationsVibrationen

Leb_100210NanFraHam2013_Car105x148Eng_Eti265.indd 1 29/07/2013 10:00:39

nanovib

CH120N

group

Less vibrationMoins de vibrationsWeniger Vibrationen



Leb_123309NanCluHam2013_Car105x148Eng_Eti249.indd 1 29/07/2013 10:08:41

nanovib

PI220N

group

Just work,we care.Mieux équipé, mieux protégé.Besser ausgerüstet,besser geschützt.

- 50%StrainEffortBemühung

Ø 4 mm

Leb_158229NanTowPin2013_Car105x148Eng_Eti252.indd 1 01/08/2013 17:18:46

nanovib

HA220N

group




Leb_100220NanGerCarHam2013_Car105x148Eng_Eti266.indd 1 29/07/2013 16:47:57

nanovib

group


HA230N



Leb_100230NanCarHam2013_Car105x148Eng_Eti267.indd 1 29/07/2013 10:06:29

nanovib

group



Leb_603229_603239NanBolCu2013_Car105x148Eng_Eti253.indd 1 29/07/2013 17:38:04

nanovib

BA420N

group

No noise nuisanceAucunenuisance sonoreKeine Lärm-belastigung


Leb_144200NanProKey2013_Car105x148Eng_Eti263.indd 1 29/07/2013 10:31:35

nanovib

group


3 times lighter3 x plus léger3 x leichter

Leb_146500_146510NanrHeeBar2013_Car148x210Eng_Eti261.indd 1 29/07/2013 17:49:40

nanovib

group




Leb_127309_127409NanSleHam2013_Car297x341Eng_Eti250.indd 1 01/08/2013 18:05:10

nanovib

group





nanovib

group


PK249N



Leb_051249NanPic2013_Car148x210Eng_Eti251.indd 1 01/08/2013 17:09:57

nanovib

group


BA120N

LighterPlus légerLeichter

Leb_141200NanrRocCutToo2013_Car148x210Eng_Eti260.indd 1 29/07/2013 16:17:17

nanovib

group



Leb_603229_603239NanBolCu2013_Car105x148Eng_Eti253.indd 1 29/07/2013 17:38:04

nanovib

group



Leb_146500_146510NanrHeeBar2013_Car148x210Eng_Eti261.indd 1 29/07/2013 17:49:40

nanovib

group


BA150N

InsulatedIsoléeIsoliertBS8020/2002

Leb_133700NanrIsuMinBar2013_Car148x210Eng_Eti247.indd 1 30/07/2013 14:22:47

nanovib

PK249N


ELV TestELV TestELV2002/44/CEm/s²

group


group


nanovib

HA210NJust work,we care.Mieux équipé, mieux protégé.Besser ausgerüstet, besser geschützt.



nanovib

CH120N

group group




nanovib

PI220N

group



Ø 4 mm

nanovib

HA220N

group group





nanovib

group group


HA230N



group group



nanovib

Just work,Mieux équipé, mieux protégé.Besser ausgerüstet, besser geschützt.



nanovib

BA420N

No noise nuisanceAucunenuisance sonoreKeine Lärm-belastigung

group group


nanovib


group


nanovib



nanovib


BA120N

LighterPlus légerLeichter

group group


group


nanovib




group


group



nanovib

group


nanovib

BA150N

InsulatedIsoléeIsoliertBS8020/2002



Insulated


nanovib

group





nanovib



nanovib

group


group



nanovib

group





group

4951

30

Leb_VisIde2013_PoiOfSaiHea1000x200Eng_495130.indd 1 19/07/2013 14:18:51

group


Vibration StrainEffortBemühung

LoadChargeLast

SafetySécuritéSicherheit

NoiseBruitLärm

PostureHaltung

Leb_VisIde2013_PoiOfSaiWobB200x1000Eng_Maf36.indd 1 29/07/2013 09:46:17

group group


group group

group

Nanovib® Claw HammerMarteau de Coffreur Nanovib®

HA210N


Maf

35


Leb_VisIde2013_PoiOfSaiWobA200x1000Eng_Maf35.indd 2 29/07/2013 09:44:06

Leb_NanRanInSto2013.indd 1 05/09/2013 15:57:58


- 30 %StrainEffortBemühung

nanovib

group

DémultiplicationGearsGetribe

Leb_603229_603239NanBolCut2014_Car105x148Eng_Eti253.indd 1 18/11/2013 11:56:37

Tube armBras tubeArmaufsatz

ErgonomicErgonomie

EccentricscrewVis excentriqueExzenterschraube

62 HRC I 55°

Eti253 V1.1 • 012014

Cut capacityCapacité coupeSchneidekapazität

19HRC 40HRC Spare jawsMâchoirede rechangeErsatzbacken

n°2 750 mm 4,2 kg 603229 BC750N Ø 11 mm Ø 9 mm 606229

n°3 900 mm 5,3 kg 603239 BC900N Ø 13 mm Ø 10 mm 606239

www.leborgne.frFiskars France SAS91320 • Wissous • France

nanovib

group

Leb_603229_603239NanBolCut2014_Car105x148Eng_Eti253.indd 2 18/11/2013 11:56:39


New merchandising and websiteThe new Leborgne® visual identityis developed on all the POS information leaflets.

All of them bear the new Leborgne® visual identity; they promote the tool's advantages in terms of risk prevention and reducing work strain. Also posters, pediments and kakemonos convey this new identity on store displays in order to strengthen recognition.

The new website is online!Go to www.leborgne.fr/en











Safety1. The experience of Fiskars® Leborgne®

on the tools market means it can contribute to Distribution's concerns for in-store safety and give advice especially suited to the presentation of its products.1.2. Various standards (in particular standard NF E25-080 of May 2005) set out the safety requirements for the pegs and materials used in store. As each point of sale comes under its own responsibility, it has to ensure that the equipment used complies with these standards, whatever its source.1.3. Each item of presentation furniture used must have sufficient strength to support the occasionally heavy weight of some of our tools. The point of sale must also ensure that this furniture is used in the conditions specified by its manufacturer.1.4. Consumer handling of the tools must not produce any risk of falling, especially when the product is replaced incorrectly.1.5. Heavy tools should be positioned neared the bottom of the shelf display. There they will be easier for the consumer to reach, without risk of dangerous falling.1.6. The cutting and pointed parts of our tools are delivered with suitable protection. Some of our tools are also delivered with information leaflets intended to give the consumer advice on safety, use and maintenance. These protection and information leaflets must remain in place so long as the products are present in store, even if these items are often stolen. This means users are guaranteed to benefit from this advice after purchasing. Simply ask the company to send you free replacements.1.7. The tool spaces at the top of the shelf display can be a cause of risk, especially if consumers have access.

2. Fiskars® gives information about its products as a contribution to consumer training so that the tools can be used and maintained in the best conditions. In order for the retailer to play its part in this training, the main advice is listed below:2.1. Personal safety involves both the strict application of the safety instructions given on our products and the protection measures taken by each user according to the requirements of their trade, their skills and the regulations in force.2.2. Before using any tool, the consumer should read and understand the symbols and any information leaflet attached to them. Should there be any doubt about their capacity to use the tool, they should not use it and must seek use advice from an experienced person. When using the tools, they must also ensure the safety of any persons who happen to be nearby.2.3. Should the tool be hired out, the lender must provide the safety instructions and the borrower should comply with them.2.4. In all cases, the eyes must be protected from the risks of any flying chips. This protection requirement is all the more necessary when the standardized symbol "1" is shown on the product, engraved in relief, or on any information leaflet. The choice of protective equipment (goggles, mask, etc.) is up to the user according to their situation.2.5. In all cases, protection is necessary from any blows and cuts that may be caused through handling or using the tools. This protection requirement is all the more necessary when the standardized symbol "2" is shown on the product, engraved in relief, or on any information leaflet. The choice of protective equipment (gloves, apron, shoes, etc.) is up to the user according to their situation.2.6. The original protection delivered for pointed or cutting parts should be retained and reused when storing the tools. After cleaning, the tools should be stored out of children's reach. The storing method must prevent any instability that could lead to the tools falling down.2.7. A tool must be used for the designed use. It is forbidden to modify the technical characteristics of a tool by grinding or welding (case of wood wedges: see below).2.8. Damaged or worn tools must not be used.2.9. Advice on wooden handles: a wooden handle that by wear has lost some of its cross-section near the head must be replaced. Also it is especially necessary to ensure the storage conditions of wooden handles to prevent unwanted wear and drying out that can create significant play between the handle and the tool head.2.10. Advice on refitting tools with handles: handles can be refitted to tools and spare handles are available. However, the risk of head/handle separation should be checked. Do not use a tool if there is any head/handle movement.2.11. Advice on tools for striking (sledge hammers, choppers, hatchets and axes): goggles must be worn. This is what the symbol "1" on products means. Never use a strike face to hit hard treated surfaces as this risks producing chips. In particular, one strike face should not be hit against another one, or a sledge hammer used to hit an axe. Always strike flat and use the specially designed strike faces. Even more than for other tools, do not use worn tools, especially those with burrs on the strike face.2.12. Advice on chisels and wood wedges: do not use these tools on treated metals, they are not designed for this. Do not use tools that are chipped or burred. Initially, burrs can be ground off. Thereafter the tool must be scrapped, especially if there are cracks.2.13. Advice on cutting tools (axes, hatchets, choppers, billhooks, scythes and sickles): they should be used with great care so that should the blade slip, it does not go on to injure the user or anyone else.

Our websites www.fiskars.fr and www.leborgne.fr provide Distribution, the General Public and Professionals with advice on tool safety and maintenance.

Notes






31573

39030

257*

9030

25 •

Leb

Cat

2014

Eng

Fiskars Construction Tools Business UnitFiskars France SASPAE du Héron183 impasse des Peupliers73110 La RochetteTél : +33 (0)4 79 25 51 22Fax : +33 (0)4 79 25 78 [email protected]

www.leborgne.fr/en


Documents

Catalogue Leborgne 2014 - English version