Catalogue - Guntug machinery

8/7/2019 Catalogue - Guntug machinery

1/11

1

Address: Hasky Industry City 6. Block Number:21 Gebze / Kocaeli / Turkey

Tel: +90 (262) 643 33 9192 Direct: +90 (262) 643 24 55 Fax: +90 (262) 643 33 66

E - Mail :[email protected] www.guntugmakina.com

About us:AKGN TORNA which was established in 1995 has been growing by increasing its quality,

dependability and its customer services. By elevating its level of serving quality and

exceeding its limits, it promotes its performance level in its own business sector and it

becomes an important industry and trade company which is named GNTU MACHINE

INDUSTRY AND TRADE LIMITED LIABILITY COMPANY. Our company is capable of giving

ministration to its customers about designed machines depending on request, auxiliary

machine components, conveyors, spirals and steel constructions by its technical staff and

available quality perspective. As GNTU MACHINE INDUSTRY AND TRADE LIMITED

LIABILITY COMPANY, we are proud of laboratory of water isolation which we have been

producing. Moreover conveyance systems with conveyor, spiral of vibration are among our

productions. In addition to those, production of auxiliary components for sanding and mixerunits in casting sector and production of guns for breaking ways are among the works which

are made in our company. Our company keeps the quality as its top priority and wants to be

A-class provider in all the sectors in which it services. Gntu Makina is also an honorable

member ofConfederation of Businessmen and Industrialists of Turkey (TUSKON).

Some examples among our productions are as following;
mailto:[email protected]:[email protected]:[email protected]


2/11

2

Startrk super jet slab calibrating & polishing machine

STARTRK IS A SPECIAL CALIBRATING/POLISHING MACHINE. YOU CAN CALIBER/POLISH GRANITE,

BEIGE, WHITE MARBLE, EMPERADOR, TRAVERTINE IF YOU HAVE ONE STARTRK MACHINE IN YOUR

FACTORY/WORKSHOP. STARTRKS APPROXIMATE PRODUCTION CAPACITY PER HOUR IS AS

FOLLOWING:

GRANITE 100m

BASALT 100m

ANDESITE 100m

BEIGE 125m

EMPERADOR 140m

WHITE MARBLE 150m

STARTRK HAS 36 ABRASIVE DISCS WITH 9 DIAMETER.REVOLUTION SPEED OF THESE DISCS ARE

VARIABLE IN EACH HEAD. REVOLUTIONS ARE DIRECTLY PROPORTIONAL WITH THE PARTICLE SIZES.

HEAD SPEEDS HAVE A RANGE OF 600-1100 REVOLUTIONS/MINUTE DEPENDING ON THE HEAD

NUMBER. THE FOLLOWING CHART SHOWS HOW MUCH A PARTICULAR KIND OF NATURAL STONE

CAN BE PROCESSED WITH A SET OF ABRASIVE CONSISTING OF 36 PIECES OF ABRASIVES:

GRANITE 15.000m

BEIGE 25.000m

WHITE MARBLE 30.000m

EMPERADOR 30.000m

TRAVERTINE 30.000m

STARTRK HAS 2000mm WIDE AND 2500mm LONG STANDS WITH PORTABLE CARRYING ROLLERS AT

THE INTAKE AND AT THE OUTLET.

8 hours' work

in 1 hour

First in the

world


3/11

3

TOTAL ENERGY CONSUMPTION 70Kw

WEIGHT 19 TON

LENGTH 12000mm

WIDTH 2250mm

REQUIRED AIR PRESSURE 2.6 6 Bar

REQUIRED WATER PRESSURE 4Bar

MAXIMUM SLAB THICKNESS 100mm

MINIMUM SLAB THICKNESS 8mm

SLAB WIDTH 1600mm

DIAMOND ROTATING DISCS 228.6mm X 36 DISCS IN TOTAL. 6 OF THEM ARE FOR

CALIBRATING AND 30 OF THEM ARE ABRASIVES.THESE ABRASIVES RANGE FROM 50 TO 8500 IN SIZE.

DISC MOVEMENT RANGE 1500mm

BRIDGE MOVEMENT 1500mm

HEADS MOTOR POWER 5.5Kw

TOTAL ENGINE POWER 70Kw (MAXIMUM)

GLITTER RATE 0.004 RA

- EACH HEAD HAS 3 DIAMOND DISCS WITH 9 DIAMETER.

- HEADS ARE AUTHOMATICALLY LUBRICATED BY MEANS OF THE CENTRAL OILING SYSTEM.

- BAND MOVEMENT IS SUBJECT TO ELECTRONICAL SPEED CONTROL.

- ALL OF THE HEADS ON THE MACHINE WORK UNBUNDLED TO EACH OTHER.

- SHOCK ABSORBING SILICON-BASEDSPECIAL SHOCK BOLSTER PROVIDES ELASTICITY.

- SILENT WORKING.

- ABRASIVE REPLACING IN 15 SECONDS.

- EVEN THE MATERIAL IS SENSITIVE AND FRAGILE IT IS NOT DAMAGED IN NO CIRCUMSTANCES

THANKS TO THE HIGH TECHNOLOGY DIAMOND ABRASIVES WE USE. FOR EXAMPLE, STRUCTURALLY

BEIGE IS A SENSITIVE AND FRAGILE MATERIAL.

- IT DOESNT LET EVEN THE EPOXY INSERTED MATERIALS FRAGMENT AND BRANCH, PROVIDES A

SMOOTH CUTTING.


4/11


5/11

5

6 legged bridge cutting machine

Loading capacity 3000 x 2200360 Rotating subbaseControl system PLCCutting disc motor power 7kw 1500 revolutionsCutting disc diameter 600mmCutting disc center point diameter 60mm

Mono shaft multiple dimensioning machine

Cutting disc diameter 400mmCutting disc center point diameter 60mmBelt driving reductor motor power 1.5kw 900 revolutionsReductor out 600 revolutions

Dimensioning height 150mmWidth of the pieces can be fixed From 10mm to 200mm


6/11

6

Mono dimensioning machine

Motor power 7.5kw 1500 revolutions

Driving reductor 0.75kw 1500 revolutionsReductor out speed 60 revolutionsCutting disc diameter 600mmCutting disc center point diameter 60mmCutting height 180mm

4 legged ST block cutting machine

Cutting disc motor power 120kw 1500 revolutionsDriving reductor 4kwReductor out speed 60 revolutionsBridge up/down motor power 4kwBridge up/down reductor 30 revolutionsWagon motor 4kwReductor out 20 revolutionsControl system PLC touchscreen panel


7/11

7

2 legged ST block cutting machine

Cutting disc motor power 120kw 1500 revolutionsDriving reductor 4kwReductor out speed 60 revolutionsBridge up/down motor power 4kwBridge up/down reductor 30 revolutionsWagon motor 4kwReductor out 20 revolutionsControl system Manuel

Concrete legged bridge cutting machine

Loading capacity 3000 x 2200360 Rotating subbaseControl system PLCCutting disc motor power 7kw 3000 revolutionsCutting disc diameter 600mm

Cutting disc center point diameter 60mm


8/11

8

Monowire slab cutting machine

Block sizes 4m x 4m x 2.20mSlab cutting sizes 10mm and moreDiameter of wire 8-10mmWire lenght 21350mm

Wire speed 25-30m/sDiameter of wheel 2100mmCutting speed 1-2m2/h (marble)

1m2/h (granite)Overall dimensions 9500 x 7000 x 4500mmweight 9000kgTotal power 20KW

360 Rotating base


9/11

9

Monowire GT slab cutting machine

Block sizes 4m x 4m x 2.20mSlab cutting sizes 10mm and moreDiameter of wire 8-10mmWire lenght 21350mmWire speed 25-30m/sDiameter of wheel 2100mmCutting speed 1-2m2/h (marble)

1m2/h (granite)Overall dimensions 9500 x 7000 x 4500mmweight 9000kg

Total power 20KWStill base


10/11

10

4 legged ST block cutting machine GM

Cutting disc motor power 120kw 1500 revolutionsDriving reductor 4kw

Reductor out speed 60 revolutionsBridge up/down motor power 4kwBridge up/down reductor 30 revolutionsWagon motor 4kwReductor out 20 revolutionsControl system PLC touchscreen panel

Motor and redactor group

Main motor power 10-75KWLength of wire 20-150mLinear speed 0-40mDiameter of flying wheel 1000mmSuitable for cutting any kind of stonequarryingVarious models ranging from 10KW to 75KW


11/11

11

Gregori polishing machine

Max. Disc Diameter 500mmDisc Movement range 1600mmBridge movement 1400mmHeads motor power 5.5kwTotal engine power 70kwMachine net weight 12000kgWater required 4bar

Processing 30m2/hour

Glitter rate 0.004 RA.

Documents

Catalogue - Guntug machinery