Upload
horticultura-poscosecha
View
318
Download
7
Embed Size (px)
DESCRIPTION
Whether your final product is peeled onions, onion rings, chopped unions, onion blocks or purée shallots, onion processing can be fully automated using Dofra Foodtec, http://ftnondofra.com, machines. It is even possible to divide onions to make them suitable for use in shashliks. The brochure explains the Processing lines, Onion peelers, De-coring and dividing machine, Onion slicer, Rotating Dipping Tank, and Production lines for onion processing.
Citation preview
MACHINERY FOR THEPROCESSING OF ONIONSWhether your final product is peeled onions, onion rings, chopped unions, onion blocks or purée shallots, onion processing can be fully
automated using Dofra Foodtec machines. It is even possible to divide onions to make them suitable for use in shashliks.
The technology used in nowadays fruit- and
vegetable processing machinery is based on classic
mechanics. Motion and action inside the machine is
achieved by springs, friction drive belts, and other
moving components. All causing wear and requiring
frequentmaintenance.
FTNON Dofra has applied a technology using
permanent super magnetism, eliminating the use
of wires, tubes, belts and springs resulting in a
machine running with frictionless components,
tremendously reducing the costs of maintenance.
Processing lines
Type OP 100 and OP 120
Onion peelers
The OP-100 onion peeler has a capacity of
approximately 100 onions per minute.
The machine adjustment is entirely mechanical, so it
is easy to operate and requires little maintenance.
Onions ranging from 55mm to 130mm in size can be
peeled without having to change the positioning chain.
The OP-120 has a larger capacity than the OP-100,
namely 120 onions per minute. However, the most
important difference between the OP-100 and the
OP-120 is that the peeling wheel of the OP-120
works on a different principle than that of the
OP-100. On the OP-120 the peeling wheel is not
driven by gears and belts but by s uper magnets.
This means that the motion of the wheel can be
achieved entirely without friction. As a result, the
machine is easy to clean and only requires minimum
maintenance. Furthermore, the machine achieves an
extremely high peeling result. If required, the OP-100
and the OP-120 can be supplied in a design that is
suitable for peeling very small onions (from 45mm)
or for peeling shallots. The FTNON Foodtec machines
are the only machines on the market that offer these
possibilities.
Type OD 6000
De-coring and dividing machine
The RDP-2500 is suitable for peeling small potatoes.
The machine is fitted with 26 peeling rollers. These
peeling rollers are mounted in a drum and the rollers
and the drum rotate independently of each other.
The product is fed through the drum by a screw. The
peeling rollers are fitted with a quick-change system
that allows a roller to be changed in no time at all.
The drum is driven by gears, unlike the majority of
other machines which are belt-driven. This means
that the drive system requires virtually no mainte-
nance. The distance between the rollers is extremely
small (2 mm) so that very small products can also be
processed. The machine is also suitable for peeling
carrots.
Type MVC 4000
Onion slicer
Onion rings can be cut effortlessly using the
MVC-4000. It is also possible to use the MVC-4000 to
chop onions and to purée shallots. The MVC-4000
has a capacity of up to 4000 kilograms per hour.
The major advantage of the MVC-4000 is that
multiple attachments and no less than 10 different
cutting blocks are available. This means that the
MVC-4000 can be used for a wide range of processes.
FTNON Dofra
www.ftnondofra.com
Nijverheidsstraat 11
5961 PJ Horst Netherlands
+31(0)77 399 98 88
Type RDT 6000
The rotating dipping tank is a machine used for
dipping onions in water. Additives can be added to
the water to improve the look of the root crop or to
extent the shelf life. Another use of the machine is to
cool the root crop. Depending on the required use
of the rotating dipping tank, the machine is available
in 2 configurations. If the machine’s primary function
is cooling, the feed through time of the root crop is
adjustable from 1.5 minutes to 6 minutes.
If the machine’s primary function is dipping, the feed
through time is adjustable between 9 seconds and
36 seconds.
Rotating Dipping Tank
Production lines for onion processing
In addition to stand-alone machines, FTNON Dofra
also supplies complete production lines for
processing onions. The FTNON Dofra product range
consists of a wide choice of machines and equipment
for transporting, storing and weighing onions.
Our range also includes inspection tables, dipping
tanks, bin-fillers and metal detection systems.