Upload
anujkumartyagi9275
View
242
Download
0
Tags:
Embed Size (px)
DESCRIPTION
mould clamps
Citation preview
CLAMPING ELEMENTS
PROLIFIC TECHNOLOGIES
Website : www.prolifictechnologies.org
UNIVERSAL
STRAP CLAMPFOR POWER PRESSES, MACHINES LIKE MILLING, DRILLING, SHAPING, BORING ETC.
MODEL T-SLOT
SIZE
T-BOLT CLAMPING
RANGE
CLAMP
SIZE
PUSC-12T
PUSC-14T
PUSC-16T
PUSC-18T
PUSC-20T
PUSC-22T
PUSC-24T
PUSC-28T
12
14
16
18
20
22
24
28
PTB 12 12 100
PTB 12 14 100
PTB 16 16 150
PTB 16 18 150
PTB 20 20 150
PTB 20 22 150
PTB 24 24 210
PTB 24 28 210
0-60
0-60
0-80
0-80
0-100
0-100
0-120
0-120
105 x 42
105 x 42
130 x 50
130 x 50
160 x 55
160 x 55
190 x 65
190 x 65
FEATURES/USES
6 Useful for job clamping on ‘T’ slot table or Drilling, Milling,
Shaping, Boring, Power Press etc.
6 No spacer packings are required at the rear of the clamp
since the body is self-positioning.
6 Bolt, Nut and Hinge Pins are made of high tensile steel.
6 Supplied complete with T-Bolts and Nuts.
MOULD CLAMP
FOR PLASTIC INJECTION MOULDING & PRESSURE DIE CASTING MACHINES
MODEL STUD CLAMPING
RANGE
CLAMP SIZE
PMC-12S
PMC-16S
PMC-20S
PMC-24S
PCSB 12 100
PCSB 16 125
PCSB 20 175
PCSB 24 200
0-35
0-40
0-50
0-60
110 x 50
135 x 60
160 x 70
180 x 80
FEATURES/USES
6 Useful for clamping of moulds on plastic injections moulding
machines and pressure die casting machines and other low
height clampings on presses etc.
6 Front portion of the clamp holds the mould.
6 No spacer packings are required at the rear of the clamp since
the body is self positioning.
6 Special swivel washer rests on the curved grooves and the
centre distance is easily set. Flange nut is tightened on the
special washer.
6 Supplied complete with Studs / T-bolts / Swivel washer, Flange
nut.
WITH CLAMPING STUD & FLANGED NUT
WITH-BOLT & FLANGED NUT
MODEL T-SLOT
SIZE
T-BOLT CLAMPING
RANGE B
CLAMP SIZE
PMC-12T
PMC-14T
PMC-16T
PMC-18T
PMC-20T
PMC-22T
PMC-24T
PMC-28T
12
14
16
18
20
22
24
28
PTB 12 12 100
PTB 12 14 100
PTB 16 16 150
PTB 16 18 150
PTB 20 20 150
PTB 20 22 150
PTB 24 24 210
PTB 24 28 210
0-35
0-35
0-40
0-40
0-50
0-50
0-60
0-60
110 x 50
110 x 50
135 x 60
135 x 60
160 x 70
160 x 70
180 x 80
180 x 80
1
T - BOLT
EXTRA LONG
HEX. NUT
CLAMP SHOWN
WITH T-BOLT
CLAMPING
STUD
FLANGED NUT
SWIVEL WASHER
U-TYPE SPL. MOULD CLAMP WITH
ADJUSTABLE SUPPORT
FOR PLASTIC INJECTION MOULDING & PRESSURE DIE CASTING MACHINES
MODEL STUD CLAMP MAX.
HEIGHT
PTUC-12S
PTUC-16S
PTUC-20S
PTUC-24S
PCSB 12 100
PCSB 16 125
PCSB 20 175
PCSB 24 200
110 x 38 x 25
125 x 48 x 32
160 x 60 x 38
200 x 75 x 38
60
70
80
85
FEATURES/USES
6 Useful for clamping of moulds on plastic injection moulding
machines and pressure die casting machines.
6 Special u-type (open ended) strap clamps having threaded
adjustable support at the rear which can be adjusted to
required height (as per mould plate thickness).
6 Front portion of the clamp holds the mould.
6 Very convenient for operator as there are no loose parts which
tend to fall down during setting hence saves setting time.
6 Specially designed washer distributes the load and holds the
clamp.
6 Supplied complete with Studs / T-bolts / Special washer /
Flanged Nut.
2
MODEL STUD CLAMP MAX.
HEIGHT
PTUC-12T
PTUC-14T
PTUC-16T
PTUC-18T
PTUC-20T
PTUC-22T
PTUC-24T
PTUC-28T
PTB 12 12 100
PTB 12 14 100
PTB 16 16 150
PTB 16 18 150
PTB 20 20 150
PTB 20 22 150
PTB 24 24 210
PTB 24 28 210
110 x 38 x 25
110 x 38 x 25
125 x 48 x 32
125 x 48 x 32
160 x 60 x 38
160 x 60 x 38
200 x 75 x 38
200 x 75 x 38
60
60
70
70
80
80
85
85
LOW HEIGHT
PINCH CLAMP
FOR MILLING, SHAPING, PLANNING, JIG BORING ETC.
MODEL T-SLOT
SIZE
CLAMP SIZE
PPC 12
PPC 14
PPC 16
PPC 18
PPC 20
PPC 22
PPC 24
PPC 28
12
14
16
18
20
22
24
28
115 x 30 x 16
115 x 30 x 16
145 x 38 x 20
145 x 38 x 20
180 x 48 x 25
180 x 48 x 25
180 x 48 x 25
180 x 48 x 25
FEATURES/USES
6 Used for clamping jobs from the side faces where complete top
surface of the job is to be machined in one setting.
6 When serrated front portion of the clamp is pressed against the
job by tightening the front bolt, it gives a downward as well as
forward clamping force.
6 Useful on milling, shapping, planning and jig boring machines.
(Complete with Allen Bolt & Nuts)
DIE / MOULD / WORK PIECE
HEAVY DUTY
PINCH CLAMP
(Complete with Allen Bolt & Nuts)
FOR MILLING, PLANNING, PLANO-MILLING ETC.
MODEL T-SLOT
SIZE
CLAMP SIZE
PHDPC-18
PHDPC-20
PHDPC-22
PHDPC-24
PHDPC-28
18
20
22
24
28
185 x 60 x 38
185 x 60 x 38
185 x 60 x 38
185 x 60 x 38
185 x 60 x 38
FEATURES/USES
6 Heavier version of low height pinch clamp.
6 Used for clamping (from sides) of heavy blocks or thicker plates
for facing of top face in one setting.
6 Useful on milling, shapping, planning, plano-milling and jig
boring machines.
LEVELING JACKMODEL CLOSED
HEIGHT
OPEN
HEIGHT
DIA AT
BOTTOM
DIA AT
TOP
DIA OF
SCREW
PLJ-1
PLJ-2
PLJ-3
PLJ-4
75
100
120
105
100
150
170
155
55
55
55
55
38
38
38
38
M-24
M-24
M-24
M-24
TOP
FACE
FLAT
FLAT
CONICAL
‘V’
HEIGHT BLOCK FOR LEVELLING JACK
MODEL EFFECTIVE HEIGHT
INCREASE WITH BLOCK
PHBLJ-75 75
FEATURES/USES
6 Used as an adjustable support block for clamps and as a stopper
or levelling block in fixtures or machines as well as for levelling
surface plates or other heavy duty work piece.
6 Its unique design does not allow the levelling spindle to rotate
while adjustment, hence makes it suitable for fine level adjust-
ment.
6 Also available in conical and V-sectional head for other applica-
tions such as inspection.
LEVELLING JACK-HEAVY DUTY
MODEL H MIN. AT
CLOSED
POSITION
H MAX.
AT OPEN
POSITION
DIA
AT
BOTTOM
DIA AT
TOP
DIA
OF
SCREW
TOP
FACE
PLJHD 160 230 75 50 M-32 FLAT
HEIGHT BLOCK FOR LEVELLING JACK-HEAVY DUTY
MODEL EFFECTIVE HEIGHT INCREASE
WITH BLOCK
PHBLJ-HD-75 75
FEATURES/USES
6 Heavier version of Levelling Jack with a heavy body and levelling
screw and knurted nut.
6 Specialy designed for heavy castings and machines.
3
Flat Top Face Conical Top Face V on Top
MAIN SCREW
KEYWAY TO RESTRICT
SCREW ROTATION
KNURLED NUT
BODY
FEMALE COLLAR TO SUIT MALE
COLLAR OF HEIGHT BLOCK
SHOWN BELOW FOR PILING
Levelling Jack Levelling Jack
With Height
Block
STEP BLOCKS
Hardened & Tempered, Black Finish
MODEL THICKNESS
(W)
PSB-1
PSB-2
PSB-3
FEATURES/USES
6 Used as supporting blocks at the rear of the clamp while clamping
the workpiece.
6 Different heights can be achieved by using combination of two
different sizes of Step Block.
ADJUSTABLE
SUPPORT PLATES
4
33 x 19
67 x 37
133 x 76
HEIGHTxLENGTH
(L x B)
HEIGHT
MIN.
ADJUS.
MAX.
30
30
30
21
42
80
48
105
215
MODEL THICKNESS
(W)
PDSB-5
PDSB-6
66 x 38
122 x 68
HEIGHTxLENGTH
(L x B)
HEIGHT
MIN.
ADJUS.
MAX.
50
50
40
72
100
195
STEP BLOCKS-HEAVY DUTY
FEATURES/USES
6 Adjustable support plates are used as supports at the rear of the
clamp.
6 Comprises of a number of plates each 2mm/4mm thick
hinged together.
6 Desired height is achieved very easily by swinging aside the
required number of plates and using the remaining as support
block.
MODEL PLATE
THICKNESS
PASP-250
PASP-2100
PASP-2150
PASP-4100
PASP-4125
PASP-4150
PASP-4200
50
100
150
100
125
150
200
MAXIMUM
HEIGHT
PLATE
OVERALL
SIZE
SIZE OF
CLAMP
REST
AREA
2 mm
2 mm
2 mm
4 mm
4 mm
4 mm
4 mm
50 X 35
50 X 35
50 X 35
50 X 35
50 X 35
50 X 35
50 X 35
25 X 35
25 X 35
25 X 35
25 X 35
25 X 35
25 X 35
25 X 35
SELF LOCKING
TEETH PROFILE
WORK
PIECE
PS
B-2
STRAP CLAMP
MODEL FOR BOLTS d
PSC 860
PSC 1080
PSC 12100
PSC 12125
PSC 14125
PSC 16125
PSC 16160
PSC 20160
PSC 20200
PSC 24200
PSC 30250
M8
M 10
M 12
M 12
M 14
M 16
M 16
M 20
M 20
M 24
M 30
9
11
14
14
16
18
18
22
22
24
30
FEATURES/USES
6 Manufactured as per IS-4292-1984.
6 Steel heat treated to 40 to 45 HRC.
6 Finish Black o dized.
6 Widely used on most of machines for clamping work
pieces of various sizes.
STEPPED
STRAP CLAMP
MODEL D-SUITABLE
FOR T-BOLT
OVERALL SIZE
5
Hardened & Tempered,
Black Finish
l a b h w w
1
60
80
100
125
125
125
160
160
200
200
250
13
15
21
21
26
26
26
30
30
35
45
22
30
40
50
45
45
65
60
80
80
100
12
16
20
20
25
25
25
30
30
38
38
25
30
40
40
48
50
50
60
60
75
75
10
12
14
14
16
18
18
22
22
26
26
PSSC 12 65
PSSC 12 100
PSSC 12 150
PSSC 16 125
PSSC 16 160
PSSC 20 160
PSSC 24 200
12
12
12
16
16
20
24
65 x 30 x 16
100 x 38 x 20
150 x 38 x 20
125 x 48 x 25
160 x 48 x 25
160 x 60 x 32
200 x 75 x 38
FEATURES/USES
6 Have teeth at rear matching to that of step blocks.
6 Operator require only one step block (not a pair).
6 Hardened and tempered.
6 Supplied in black finish.
Hardened & Tempered,
Black Finish
GOOSE NECK
CLAMPMODEL
PHSC 10 100
PHSC 12 125
PHSC 16 160
PHSC 20 200
PHSC 24 250
12
16
20
24
32
M10
M12
M16
M20
M24
FEATURES/USES
6 Manufactured as per IS-4279-1984.
6 Finish Black O Dized.
6 Suitable to use as an off-set clamp on most of machine.
Hardened & Tempered,
Black Finish
d h l l
1
l
2
c W W For Bolts
of
15
20
25
30
35
30
40
50
60
70
32
40
50
70
80
32
40
49
55
72
100
125
160
200
250
11
14
18
22
26
30
40
50
60
80
SINGLE PIECE OF STEP
BLOCK CAN BE USED
WITH STEPPED STRAP
CLAMP
WORK
PIECE
STEPS TO MATCH
STEP BLOCK
U-CLAMP
MODEL FOR BOLTS
OF
d
P 8 80
P 10 100
P 12 160
P 16 200
P 20 250
P 24 250
P 24 315
P 30 315
M8
M 10
M 12
M 16
M 20
M 24
M 24
M 30
80
100
160
200
250
250
315
315
FEATURES/USES
6 Manufactured as per IS-4293-1984.
6 Steel heat treated to 40 to 45 HRC.
6 Blackodized finish.
6 Widely used for repetitive clamping applications frequent
insertion and removal of part being clamped.
6
Hardened & Tempered,
Black Finish l t t
1
t
2
9
11
14
18
22
26
26
32
15
20
25
30
40
40
40
40
8
10
12
16
20
20
20
20
4
5
6
8
10
10
10
10
h
25
31
38
50
62
66
66
72
T-NUTMODEL
PTN 8 6
PTN 10 8
PTN 12 10
PTN 14 10
PTN 14 12
PTN 16 12
PTN 16 14
PTN 18 12
PTN 18 16
PTN 20 16
PTN 22 16
PTN 22 20
PTN 24 20
PTN 28 24
PTN 36 24
PTN 36 30
13
15
18
22
22
25
25
28
28
32
35
35
40
44
54
54
FEATURES/USES
6 Manufactured as per IS 2015-1997.
6 C45 head treated to 22 to 28 HRC.
6 Finish - blackodized.
6 Useful for the machines having ‘T’ slots, jig fixtures hydraulic
equipments, assorted setting elements and adopters.
Hardened & Tempered,
Black Finish
6
6
7
8
8
9
9
10
10
12
14
14
16
18
22
22
10
12
14
16
16
18
18
20
20
24
28
28
32
36
44
44
M6
M8
M10
M10
M12
M12
M14
M12
M16
M16
M16
M20
M20
M24
M24
M30
8
10
12
14
14
16
16
18
18
20
22
22
24
28
36
36
a d s h k
T-BOLT
MODEL THREAD
SIZE
PTB-1212-80
PTB-1212-100
PTB-1212-160
PTB-1214-80
PTB-1214-100
PTB-1214-125
PTB-1214-160
PTB-1214-200
PTB-1616-100
PTB-1616-150
PTB-1616-225
PTB-1616-290
PTB-1618-100
PTB-1618-150
PTB-1618-225
PTB-1618-290
PTB-2020-110
PTB-2020-150
PTB-2020-210
PTB-2022-110
PTB-2022-150
PTB-2022-210
PTB-2022-285
PTB-2424-110
PTB-2424-150
PTB-2424-210
PTB-2428-110
PTB-2428-150
PTB-2428-210
PTB-2428-285
PTB-2428-350
PTB-3036-160
PTB-3036-250
PTB-3036-320
FEATURES/USES
6 Manufactured as per IS 2014-1996.
6 Toughened C 45 to 22to 28 HRC.
6 Rolled threads.
6 Finish - Blackodized.
6 Used in jig-fixtures, hydraulic equipments as one of the
clamping elements.
7
Forged Head, Hardened & Tempered,
Black Finish
T-SLOT
SIZE
TOTAL
LENGTH
HEAD THK
M-12
M-12
M-12
M-12
M-12
M-12
M-12
M-12
M-16
M-16
M-16
M-16
M-16
M-16
M-16
M-16
M-20
M-20
M-20
M-20
M-20
M-20
M-20
M-24
M-24
M-24
M-24
M-24
M-24
M-24
M-24
M-30
M-30
M-30
12
12
12
14
14
14
14
14
16
16
16
16
18
18
18
18
20
20
20
22
22
22
22
24
24
24
28
28
28
28
28
36
36
36
80
100
160
80
100
125
160
200
100
150
225
290
100
150
225
290
110
150
210
110
150
210
285
110
150
210
110
150
210
285
350
160
250
320
18
18
18
22
22
22
22
22
25
25
25
25
28
28
28
28
32
32
32
35
35
35
35
40
40
40
44
44
44
44
44
54
54
54
7
7
7
8
8
8
8
8
9
9
9
9
10
10
10
10
12
12
12
14
14
14
14
16
16
16
18
18
18
18
18
22
22
22
CLAMPING STUD
MODEL d
PCS 850
PCS 875
PCS 8100
PCS 8150
PCS 1050
PCS 1075
PCS 10100
PCS 10150
PCS 10200
PCS 1275
PCS 12100
PCS 12125
PCS 12150
PCS 12175
PCS 12200
PCS 12250
PCS 12300
PCS 14100
PCS 14150
PCS 14200
PCS 14250
PCS 16100
PCS 16125
PCS 16150
PCS 16200
PCS 16250
PCS 16300
PCS 20150
PCS 20200
PCS 20250
PCS 20300
PCS 20400
PCS 20500
PCS 24150
PCS 24200
PCS 24250
PCS 24300
PCS 24400
PCS 24500
PCS 30150
PCS 30200
PCS 30250
PCS 30300
PCS 30400
PCS 30500
FEATURES/USES
6 Manufactured as per IS 13178-1991.
6 Toughened C 45 to 22 to 28 HRC.
6 Rolled threads.
6 Finish - Blackodized.
6 Used in jig-fixtures, hydraulic equipments as one of the
clamping elements.
8
For use with T-Nuts
b b
1
M 8
M 8
M 8
M 8
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M14
M14
M14
M14
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
M24
M24
M30
M30
M30
M30
M30
M30
25
48
63
95
25
48
63
95
125
48
63
75
95
110
125
160
190
63
95
125
160
63
75
95
125
160
190
95
125
160
190
250
250
95
125
160
190
250
250
95
125
160
190
250
250
11
11
11
11
13
13
13
13
13
15
15
15
15
15
15
15
15
17
17
17
17
19
19
19
19
19
19
27
27
27
27
27
27
35
35
35
35
35
35
43
43
43
43
43
43
L
50
75
100
150
50
75
100
150
200
75
100
125
150
175
200
250
300
100
150
200
250
100
125
150
200
250
300
150
200
250
300
400
500
150
200
250
300
400
500
150
200
250
300
400
500
CLAMPING STUD
WITH SLOT
FEATURES/USES
6 Have longer threaded length on one side for longer insertion in
the tapped holes of threaded platens of moulding machines.
6 Supplied in hardened and tempered condition with black finish.
6 Studs have a flattened middle portion for tightening and
loosening with the help of an open ended spanner.
CLAMPING STUD
WITH HEX SPANNER
9
Hardened & Tempered,
Black Finish
FEATURES/USES
6 Studs have Hexagonal middle portion for tightining and loosening
with the help of a spanner.
FOR USE ON MACHINE BEDS HAVING TAPPED HOLES
MODEL D THREAD L B
1
PHCSB-12-100
PHCSB-12-125
PHCSB-12-150
PHCSB-12-175
PHCSB-16-125
PHCSB-16-150
PHCSB-16-175
PHCSB-16-200
PHCSB-20-150
PHCSB-20-175
PHCSB-20-200
PHCSB-24-175
PHCSB-24-200
PHCSB-24-225
M-12
M-12
M-12
M-12
M-16
M-16
M-16
M-16
M-20
M-20
M-20
M-24
M-24
M-24
B
40
50
65
80
50
65
80
100
60
70
80
70
80
90
30
30
30
30
40
40
40
40
50
50
50
60
60
60
100
125
150
175
125
150
175
200
150
175
200
175
200
225
FOR USE ON MACHINE BEDS HAVING TAPPED HOLES
MODEL D THREAD L B
1
PCSB-12-100
PCSB-12-125
PCSB-12-150
PCSB-12-175
PCSB-16-125
PCSB-16-150
PCSB-16-175
PCSB-16-200
PCSB-20-150
PCSB-20-175
PCSB-20-200
PCSB-24-175
PCSB-24-200
PCSB-24-225
M-12
M-12
M-12
M-12
M-16
M-16
M-16
M-16
M-20
M-20
M-20
M-24
M-24
M-24
B
40
50
65
80
50
65
80
100
60
70
80
70
80
90
30
30
30
30
40
40
40
40
50
50
50
60
60
60
100
125
150
175
125
150
175
200
150
175
200
175
200
225
Hardened & Tempered, T-Nut
EXTRA LONG NUT
FEATURES/USES
6 Finish - Blackodized.
6 Used in jig-fixtures, hydraulic equipments.
6 These nuts have longer life as there are more number of threads.
EXTENSION NUT
10
Hardened & Tempered, Black Finish
FEATURES/USES
6 Finish - Blackodized.
6 To couple the studs for the purpose of increasing the length.
MODEL D M S
PEN 824
PEN 1030
PEN 1236
PEN 1648
PEN 2060
PEN 2472
PEN 3090
M8
M10
M12
M16
M20
M24
M30
13
17
19
24
30
36
45
24
30
36
48
60
72
90
MODEL D M
PELN-812
PELN-1015
PELN-1218
PELN-1421
PELN-1624
PELN-2030
PELN-2436
PELN-3045
S
13
17
19
24
24
30
36
45
12
15
18
21
24
30
36
45
M-8
M-10
M-12
M-14
M-16
M-20
M-24
M-30
(HEX NUT)
FLANGED NUT
FEATURES/USES
6 These have larger face contact area with the surface to be
tightened on.
6 Forged.
6 Hardened and tempered.
6 Finish - Blackodized.
6 Proves to be economical in comparison to a pair of Hex. Nut &
Washer.
MODEL D
THREAD SIZE
D1
PFN-12
PFN-16
PFN-20
PFN-24
L
18
24
30
36
25
32
40
47
M-12
M-16
M-20
M-24
S
19
24
30
36
FEATURES/USES
6 Manufactured as per IS 4291.
6 Toughened C 45 to 22 to 28 HRC.
6 Finish - Blackodized.
6 Widely used in most of the clamping system.
11
Case Hardened, Black Finish
MODEL FOR BOLTS OF d
1
PPW 8
PPW 10
PPW 12
PPW 14
PPW 16
PPW 20
PPW 24
PPW 30
s
4
4
5
6
6
6
8
10
8.4
10.5
13
15
17
21
25
31
M-8
M-10
M-12
M-14
M-16
M-20
M-24
M-30
FEATURES/USES
6 Manufactured as per DIN 6372-1972.
6 Steel heat treated to 40 to 45 HRC.
6 Blackodized Finish.
6 In the construction of fixtures having special application as
spacer or clamping element because it could be swung out of
the way and the part can be inserted or removed quickly.
MODEL FOR BOLTS OF D
PCW 8
PCW 10
PCW 12
PCW 14
PCW 16
PCW 20
PCW 24
PCW 30
t
7
8
9
12
12
14
16
16
28
34
40
63
56
64
75
100
M 8
M 10
M 12
M 14
M 16
M 20
M 24
M 30
d
1
d
21
25
30
37
37
45
52
60
8.4
10.5
13
15
17
21
25
31
d
2
23
28
35
40
45
50
60
70
Case Hardened, Black Finish
PLAIN WASHER
C-WASHER
R=d/2 Knurled Over Diameter
d1
tD
d
FEATURES/USES
6 Steel parallels are used as precision packing supports under
jobs or fixtures.
6 Made from special alloy steel, hardened and tempered.
6 Precision ground in matched pairs.
6 All four sides are chamfered.
12
STEEL V-BLOCK
FEATURES/USES
6 Made out of special alloy steel, hardened, tempered and
precision ground on all sides.
6 Supplied in matched pairs with one clamp to hold the job on V-
Block.
6 Available in models with one side ‘V’ as well as two sides ‘V’.
MODEL WITH
ONE SIDE V
SVB-1-50
SVB-1-80
SVB-1-100
SVB-1-125
SVB-1-150
50
80
100
125
150
MODEL
PSP - 20
PSP - 30
PSP - 40
PSP - 50
PSP - 60
PSP - 70
MAGNETIC V-BLOCK
FEATURES/USES
6 Having holding ‘V’ on two sides fitted with hardened steel plates
to ensure extra wear resistance.
6 All the sides are precision ground.
6 Available in single as well as matched pairs.
6 Parallelism & Squareness of all faces & 'V' within ±0.005 mm.
MODEL
MVB-100
MVB-150
SIZE
10 x 20 x 150
15 x 35 x 150
20 x 45 x 200
30 x 55 x 250
30 x 60 x 300
45 x 75 x 300
Hardened & Ground
Hardened & Ground,
Matched Pairs
LENGTH HEIGHT WIDTH
100
150
95
95
75
75
Hardened & Ground
MODEL WITH
TWO SIDE V
LENGTH HEIGHT WIDTH
SVB-2-50
SVB-2-80
SVB-2-100
SVB-2-125
SVB-2-150
40
63
75
90
100
40
63
75
90
100
STEEL PARALLELS
CLAMPING KIT-34 PIECE
(WITH ADJUSTABLE SUPPORT
PLATES & STRAP CLAMPS)
13
MODEL PCK-34-1412
CONTENTS
T-NUTS
CLAMPING STUDS
FLANGED NUTS
EXTENSION NUTS
STRAP CLAMPS
ADJUSTABLE
SUPPORT
PLATES
TOTAL NO. OF
PIECES
T-SLOT SIZE 14 MM
PTN-14-12-4 NOS
PCS-12-75-4 NOS
PCS-12-100-4 NOS
PCS-12-150-4 NOS
PCS-12-200-4 NOS
PFN-12-4 NOS
PEN-12-2 NOS
PSC-12-100-2 NOS
PSC-12-150-2 NOS
PASP-250-2 NOS
PASP-2100-2 NOS
34 PIECES
PCK-34-1612
T-SLOT SIZE 16 MM
PTN-16-12-4 NOS
PCS-12-75-4 NOS
PCS-12-100-4 NOS
PCS-12-150-4 NOS
PCS-12-200-4 NOS
PFN-12-4 NOS
PEN-12-2 NOS
PSC-12-100-2 NOS
PSC-12-150-2 NOS
PASP-250-2 NOS
PASP-2100-2 NOS
34 PIECES
PCK-34-1812
T-SLOT SIZE 18 MM
PTN-18-12-4 NOS
PCS-12-75-4 NOS
PCS-12-100-4 NOS
PCS-12-150-4 NOS
PCS-12-200-4 NOS
PFN-12-4 NOS
PEN-12-2 NOS
PSC-12-100-2 NOS
PSC-12-150-2 NOS
PASP-250-2 NOS
PASP-2100-2 NOS
34 PIECES
14
Rack is available for
PCK - 14-12
PCK - 16-12
PCK - 18-12
G
ro
ss W
t.
15 K
g.
Type
PCK-108
PCK-1210
PCK-1412
PCK-1612
PCK-1812
PCK-1816
PCK-2016
PCK-2220
PCK-2420
PCK-2824
10 x M8
12 x M10
14 x M12
16 x M12
18 x M12
18 x M16
20 x M16
24 x M20
24 x M20
28 x M24
108
1210
1412
1612
1812
1816
2016
2220
2420
2824
M8
M10
M12
M12
M12
M16
M16
M20
M20
M-24
824
1030
1236
1236
1236
1648
1648
2060
2060
2472
865, 81008150
1065, 1010010150
1265, 1210012150
1265, 1210012150
1265, 1210012150
1665, 1610016150
1665, 1610016150
2065, 2010020150
2065, 2010020150
2465, 2410024150
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
58
58
58
58
58
58
58
58
58
58
875, 8100, 81258150, 8175, 8200
1075, 10100, 1012510150, 10175, 10200
1275, 12100, 1212512150, 12175, 12200
1275, 12100, 1212512150, 12175, 12200
1275, 12100, 1212512150, 12175, 12200
1675, 16100, 1612516150, 16175, 16200
1675, 16100, 1612516150, 16175, 16200
2075, 20100, 2012520150, 20175, 20200
2075, 20100, 2012520150, 20175, 20200
2475, 24100, 2412524150, 24175, 24200
SuitableFor T-SlotX Screw
Size
T- NutsPTN
6 nos. each
ClampingStud PCS
Qty : 4 nos. each
FlangedNuts
PFN 6 nos. each
ExtensionNuts
PEN 4 nos.each
Step BlocksPSB
4 nos.each
Total No.of
Pieces
SteppedStrap
ClampsPSSC
2 nos. each
CLAMPING KIT 58 PIECES
(STUD, T-NUT, CLAMP
STEP BLOCK)
Each set is housed in wooden box / rack.* Assorted clamping elements essentiallyn required for use on machine tool having T-slotted bed are compactly housed in
compartmentalised elegent wooden box. Ideal for use on CNC machining centre, milling, drilling, boring, plano-milling, shaping machines.
* Machine tool manufacturers can supply such set to their customer alongwith each machine to take care of basic clamping requirements.
* Selection : user to select the type of kit required by identifying T-slot of the machine bed. Protection from rusting, chemically blackened / zinc plate.
15
HOLD DOWN TOGGLE
CLAMP-HORIZONTAL
HANDLE
HOLD DOWN TOGGLE
CLAMP-VERTICAL
HANDLE
STRAIGHT LINE ACTION
TOGGLE CLAMP
6 Designed for instant and positive holding or release of job.
6 Most useful for Jigs, Fixtures, Drilling, Milling, Reaming, Assembling and other general
clamping.
MODEL
Max
Clamping
Height
PH-1525
PH-3565
PH-46105
PH-56125
15
35
46
56
25
65
105
125
24x24
40x40
55x57
60x65
85
175
285
310
M6
M8
M10
M12
50
250
350
500
Dia.
Spindle
Holding
Capacity
Kg.
A
MAX
Base
Total
Length
FEATURES/USES
6 Useful where clamp with horizontal handle cannot be accomodated or where more
clamping pressure is required.
6 It is useful for all kinds of Jigs, Fixtures, Drilling, Milling and other general clamping.
MODEL
Max
Clamping
Height
PV-2635
PV-4695
PV-52125
PV-86150
25
46
52
86
35
95
125
150
40x30
78x45
70x45
75x45
125
210
220
330
M6
M10
M12
M16
100
400
350
600
Dia.
Spindle
Holding
Capacity
Kg.
A
MAX
Base
Total
Length
FEATURES/USES
6 These have a straight line action as the plunger moves in straight line forward and
backward with easy to operate handle.
6 Plunger is hardened and ground and it moves in a accurately machined bore.
6 Designed for instant holding/release of job.
6 Most useful for Jigs, Fixtures, Drilling, Milling, Reaming, Assembling.
MODEL
Height
Plunger
PHTC-2530
PHTC-3645
PHTC-4560
25
36
45
50x50x6
60x60x6
75x75x8
130
175
240
12
16
20
300
400
700
Dia.
Plunger
Holding
Capacity
Kg.
Base
Total
Length
FEATURES/USES
FEATURES/USES
‘P-Tech’ Tool Maker’s Grinding Vice has body of one-piece
construction made of tool steel, hardened, tempered & precision
ground. This vice can be used standing on its base, sides, end or top.
Movable jaw is spring loaded for positive down hold & quick retreat.
Due to downward pressure of jaw, job does not tilt while tightening in
this vice. This vice can be used as a reference for inspection.
6 Hardened & Tempered to 52 - 56 HRC.
6 All side Parallelism & Squareness within ±0.005mm.
MILLING & GRINDING ACCESSORIES
MILLING & GRINDING ACCESSORIES
MODEL
PTMGV-3
PTMGV-4
OVERALL
LENGTH
L
196
245
OVERALL
WIDTH
W
75
97
JAW
DEPTH
A
43
50
OVERALL
HEIGHT
H
MAX. JAW
OPENING
B
75
94
105
130
TOOL MAKER’S GRINDING
VICE-PIN TYPE
16
GRINDING VICE-LEAD
SCREW TYPE
FEATURES/USES
‘P-Tech’ Grinding Vice is also a precision machine vice. Body & jaw
made of tool steel, hardened, tempered & precision ground having
accuracies same as in case of Tool Maker’s grinding vice.
6 Hardened & Tempered to 52 - 56 HRC.
6 All sides Parallelism & Squareness within ± 0.005mm.
MODEL OVERALL
LENGTH
PGV-75
PGV-100
205
240
40
45
75
100
70
90
OVERALL
HEIGHT
JAW
WIDTH
JAW
DEPTH
MAX. JAW
OPENING
90
105
PRECISION SINE VICE
FEATURES/USES
‘P-Tech’ Precision Sine Vice is used to obtain precise angles by means of
gauge blocks. Tool Maker’s grinding vice is mounted with precision hinged
hardened & ground rollers on hardened bottom plate made of tool steel. This
Sine Vice can be used as a reference for inspection
6 Hardened & Tempered to 52 - 56 HRC.
6 Angle setting accuracy within ± 5 seconds.
6 All side Parallelism & Squareness within± 0.005mm.
6 Centre distance of rollers within±0.005mm.
6 A recess of exactly 2mm depth is provided on rest plate for setting up of very
small angles with standard gauage blocks.
6 Rust free hardened & ground hinge roller.
Chart for setting sine angles with the help of gauge blocks is provided.
MILLING & GRINDING ACCESSORIES
MODEL
PSV-3
OVERALL
LENGTH
L
196
JAW
WIDTH
75
JAW
DEPTH
40
OVERALL
HEIGHT
H
MAX. JAW
OPENING
B
105 105
C.D. OF
ROLLERS
150
17
MILLING & GRINDING ACCESSORIES
PRECISION SINE VICE
SCREW TYPE
FEATURES/USES
'P-tech' Precision Sine Vice Screw Type is a Screw type version of precision
Sine Vice Screw type design is more conveneint to use for the operator.
6 Hardned & Tempered to 52-56 HRC.
6 All side Parallelism & Squareness within ± 0.005 mm.
6 Centre distance of rollers within ± 0.005 mm.
6 A recess of exactly 2 mm depth is provided on rest plate for setting up of very
small angle with standard gauge blocks.
Chart for setting sine angle with the help of Gauge blocks is provided.
MODEL OVERALL
LENGTH
OVERALL
HEIGHT
JAW
WIDTH
JAW
DEPTH
MAX. JAW
OPENING
PSS-3 205 100 75 40 90
FEATURES/USES
6P-Tech Two Piece Vice is a very useful vice for milling, planning plano
milling, machining centres or Jig boring machines. Two piece
construction makes it versatile to hold any size of job which can be
accommodated on the machine table. Fixed jaw and the body consisting
of movable jaw are to be mounted separately on the machine table
depending upon the size of the job. Most suitable for machining of big &
heavy work pieces.
6 Carbon steel lead screw having acme threads.
6 Phosphorous bronze nut for longer life.
6 Hardened & ground jaws made of tool steel.
6 Unbreakable Steel handle.
MODEL JAW WIDTH
W
PTPV-150 150 21025113
JAW DEPTH
D
TRAVEL OF
MOVABLE
JAW T
L MAX. A B
144 17
TWO PIECE VICE
18
MILLING & GRINDING ACCESSORIES
FEATURES/USES
P -Tech Milling Machine vice with standard Swival Base is made out
of high quality seasoned casting. Swival is full 360 degrees. Most
suitable for heavy duty milling due to its rigid construction and low
overall height for maximum clearance. Can be mounted on machine
table without Swival base also.
6 Parallelism & Squareness are accurately maintained suitable for
machining purpose.
6 Carbon steel lead screw having acme threads is fully enclosed for
maximum protection.
6 Extra long nut for longer life.
6 Unbreakable Steel handle.
6 Hardened & ground jaws made of tool steel.
6 Precision ground top and bottom of vice bed.
MODEL
PMMV-4
PMMV-6
PMMV-8
MILLING & GRINDING ACCESSORIES
JAW
WIDTH
100
150
200
JAW
DEPTH
45
55
60
MAX.
OPENING
100
150
200
MILLING MACHINE
VICE WITH SWIVAL
BASE
FEATURES/USES
6 Ideal for clamping work pieces with higher and controlled clamping force.
6 Considerable force magnification is achieved there by reducing operator
fatigue and eliminating the necessity of hammering the crank.
6 Used for CNC and conventional milling machines, grinding and other tool
room application.
SPECIFICATION
MODELS
Width of jaws
Depth of jaws
Jaw opening range
Position - I (Approx)
Position - II (Approx)
Position - III (Approx)
Overall width of swivel base
Overall length of swivel base
Clamping Force
Overall Ht. with Swivel base
Overall Ht. without Swivel base
Total wt. without swivel base (Approx)
Total wt. with swivel base (Approx)
PAPS-150
PAPS-175
PAPS-200
PAPS-250
TYPE
PRMV-150
SIZE
TYPE
PRMV-300
150mm
53mm
0-150mm
0-75mm
100-150mm
-
300mm
330mm
4500 Kgs
180mm
136mm
46Kgs
60Kgs
150 x 125 x 110
175 x 135 x 110
200 x 150 x 125
250 x 200 x 150
150mm
53mm
0-300
0-100mm
98-200mm
198-300mm
300mm
330mm
5000Kgs
180mm
136mm
55Kgs
69Kgs
HYDRAULIC MACHINE
VICE PRMV-150, 300
C.I. ANGLE PLATE
SLOTTED
19
MILLING & GRINDING ACCESSORIES
FEATURES/USES
6 P-Tech C. I. Angle Plate-Slotted is made out of high quality
seasoned casting having precision ground outside faces
& ends.
6 All clamping slots are machined for uniformity.
6 Accuracy in parallelism & Squareness within ± 0.01 mm per
200 mm length.
ECCENTRIC EDGE FINDER
FEATURES/USES
6 Mechanical device, used on milling & boring m/c for accurate
location of m/c spindle with respect to work piece.
6 Shank and probe are coupled together by an internal spring for
independent rotation of both.
6 It is precisely ground all over to ensure better accuracy and
repeatability of edge finding.
Model
EF
Probe Dia Shank Dia
10 10
20
TOUCH PROBE SENSOR
FEATURES/USES
6 This is an electronic edge finding device.
6 Used on machines like CNC milling, machine centre, jig boring of jig
grinding m/c to bring the machine in ref. to the job held.
6 Red light glows on touching the job.
6 Concentricity of ball within 0.005
Model
TPS
Ball Dia Shank Dia
10 mm 10 mm
Z-AXIS ZERO SETTER
FEATURES/USES
6 Large setting surface of spring loaded plunger for convenience.
6 Pressing force is very low to avoid breakage of small end mill & drill.
6 Easy to calibrate by a ground parallel or gauge block.
Tool presetter (Z-axis zero setter Z-50) is used in CNC- milling
maching centres to set the tool height in reference to the machine
table or the workpiece surface. Setting height - 50.00±0.0 mm
FEATURES/USES
6 This is an universal grinding fixture.
6 Used for precision grinding of round and angular shaped parts to
form punches, EDM electrodes and core pins.
6 Shapes of punches formed by grinding are shown below.
6 24 position index plate
6 All working parts made of tool steel duly heat treated.
6 Position of V-Block can be adjusted to bring the punch to be formed at
concentric position.
21
FEATURES/USES
6 This is a precision grinding wheel dressing instrument that dresses
two angle tangent to a radius in one continuous motion.
6 Can be used on any type of surface grinder and tool cutter grinder.
6 This device reduce set up and dressing time to bare minimum due to
its design.
6 No height gauge or set up aids required, simple, fast and accurate
setting for radius is done by measuring over the twin pins with
micrometer or by inserting gauge blocks between the pins.
6 Graduations on hub having a main scale and a vernier scale are
privided for accurate angle dressing.
Model
RAD
OAL OAH Base Max. Wheel
Dia
Internal
Radii
External
Radii
Linear
Travel
345 130 100x100 250 10-40 0-40 72mm
WE ALSO MANUFACTURER
1. Drill Jig Bushes
2. Dowel Pins to IS : 2393
3. Tool Room Components
4. Piston Pins
5. Guide Bushes to IS Specification
6. Foundry Bushes and pins to IS Specifications
Designs and Dimensions are subject to change without prior notice
PUNCH FORMER
RADIUS AND
ANGLE DRESER