Catalogue Bleaching Earth

Embed Size (px)

Citation preview

  • 7/28/2019 Catalogue Bleaching Earth

    1/3

    Zeotec Adsorbents Pvt Ltd187, Gr. Floor, Hari Nagar Ashram, Mathura RoadNew Delhi 110014 (INDIA)Tel. : 91-11-26345003, 26343616 Fax : 91-11- [email protected]@zeotecadsorb.comwww.zeotec.co.in

    Works :Plot No. 24/15/2, Railway Road, Sameypur Badli Industrial Area, New Delhi

    Page 1/3

    ACTIVATED BLEACHING

    EARTH PRODUCTS

    Zeotecknows the raw material and thats why Zeotec add value to Simple clay.

    We induce porosity in each particle which inturn gives surface area for colour adsorption and providepermeability to oil to flow through.

    It is low bulk density product so cover more area for decolorisation.Induced porosity in each particle provides high surface area for decolourization.Controlled particle size increases the filtration rate and minimize oil retention.

    Particles are so treated such that it does not disintegrate during the process and choke thefiltration system.

    A Properties Zeosil Super Zeosil Excel Zeosil 10

    1 Appearance Free Flowing Powder Free Flowing Powder Free Flowing Powder

    2 Colour Cream Yellow to White Gray to CreamYellow

    Gray to Cream Yellow

    3 Bulk density (gm / cc) 0.40.5 0.700.75 0.750.80

    4 PH (2 % Slurry) 2.54.5 46.5 57

    5 Moisture 89 56 % 89 %

    6 Particle Size100 mesh

    150 mesh

    200 mesh

    85

    80

    75

    92 %

    85 %

    90 %

    85 %

    7 Bleaching activity

    on Various oils

    Above90

    Soyabean, Mustard,Ricebran

    85% + 5%

    Soyabean, RicebranMustard, Sunflower

    75% + 5%

    Soyabean, MustardSunflower

    8 Filtration rate Consistently comparable with international standards.

    9 Acidity as H2SO4 0.10.3 --------- ---------

    10 Surface Area (BET) 350390 --------- ---------

    11 Required dosage % 0.50.7 --------- ---------

    B Packing 25 Kgs in HDPE Bag 40 Kgs in HDPE Bag 40 Kgs in HDPE Bag

    Typical Specifications

  • 7/28/2019 Catalogue Bleaching Earth

    2/3

    Zeotec Adsorbents Pvt Ltd187, Gr. Floor, Hari Nagar Ashram, Mathura RoadNew Delhi 110014 (INDIA)Tel. : 91-11-26345003, 26343616 Fax : 91-11- [email protected]@zeotecadsorb.comwww.zeotec.co.in

    Works :Plot No. 24/15/2, Railway Road, Sameypur Badli Industrial Area, New Delhi

    Page 2/3

    TECHNICAL INFORMATION

    Optimum Bleaching EarthHighly Active Bleaching Earth

    ZEOSIL SuperFOR ULTIMATE COLOUR ADSORPTION & COST SAVINGS

    Product Description

    ZEOSILbleaching earth is manufactured now to cut down cost of refining and consumption

    bleaching earth. The bleaching earth consumption will be reduced from 30 to 50% minimum

    comparison with world-renowned top quality bleaching earths currently available in the market.

    ZEOSILis a high adsorptive capacity active bleaching earth used in a wide scope of application. I

    manufactured by acid activation process from high grade selected calcium based Fullers Earth mi

    from our vast mines.

    ZEOSIL is a fine, grayish-white powder showing a highly porous inner structure and a multitude

    acid sites upon its surface.

    ZEOSIL is a well suitable for the removable of compounds like chlorophyll a & b, beta-carotino

    phospholipids and peroxides, via chemisorptions and acid catalysis. The bleaching earth

    exceptionally good for difficult to bleach oils and fats, vegetable oil, microcrystalline wax, petrole

    jelly, petroleum products etc.

    ZEOSIL is very suitable for refining vegetable and animal oils and fats, moreover for furnish

    and/or reprocessing numerous types of mineral oils, paraffins and waxes.

    ZEOSILhas excellent bleaching efficiency on Castor Oil, Soya Bean Oil, Rice Bran Oil, Olive

    Cotton seed Oil, Sunflower Oil, Palm Kernel Oil, Rapeseed Oil, Mustard Oil, microcrystalline wax

    Insulating Oil.

    Physical/chemical characteristics (typical product data) (+ Or10%)

    Apparent bulk density (compacted) g/cc

    0.40 ~ 0.50Free moisture (2 h, 1100C) %

    8 ~ 13%

    Loss on ignition (Pre dried, 2 h , 1.000 0C) % 6 ~ 8

    PH (10% Suspension, filtered) - 2.50 ~ 4.5

    Acidity mg KOH.g < 1

    Surface Area (B.E.T) m2/g 220

    Micro pore volume 080 nm ml/g 0.60

    _____________________________________________________________________________

  • 7/28/2019 Catalogue Bleaching Earth

    3/3

    Zeotec Adsorbents Pvt Ltd187, Gr. Floor, Hari Nagar Ashram, Mathura RoadNew Delhi 110014 (INDIA)Tel. : 91-11-26345003, 26343616 Fax : 91-11- [email protected]@zeotecadsorb.comwww.zeotec.co.in

    Works :Plot No. 24/15/2, Railway Road, Sameypur Badli Industrial Area, New Delhi

    Page 3/3

    Filtration Properties :

    ZEOSILshows excellent filtration performance. The filtration time(according to the standard meth

    averages between 25 and 60 seconds resulting in higher output.

    Chemical Analysis :

    From a chemical point of view bleaching earth is hydmted silicate aluminium, which is min

    logically, related to Attapulgite. In this mineral there exist a 4 to 1 proportion between silicic acid

    Alumina. The Alumina component may be replaced partially by iron & magnesium. The analyse

    given type of bleaching earth is of minor importance as regards its quality. The average composition

    our product for instance, is as follows:

    Silicium Oxide : 47.8% Aluminum Oxide : 18% Iron(III) Oxide : 1.12%

    Magnesium Oxide : 3.8% Calcium Oxide : 10.1% Ignition Loss : 7.2%

    Bleaching / Color Reduction :

    It is essential process or adsorption, therefore when developing our bleaching earth it is our aim

    furnish for each of the different types of oil a special grade of bleaching earth having a maxim

    power of adsorption. As a result each grade maybe relied upon, in its particular application, to prod

    the highest possible bleaching effects under condition of maximum economy as regard of consumpt

    of material. The advantage of our product from an economic point of view are due to reduction in

    quantity of bleaching earth required as well as to attendant reduction in the amount of oil lost in

    bleaching process.

    Particle Size Distribution :

    Besides other method, the particle size distribution ofZEOSILis determined by a sieve analysis of

    dry powder. The following average values have been found for the various mesh BSS sieve fractio

    + 100 = 2 %, + 200 = 6% to 18 % + 240 = 2% to 15 %, + 300 = 5%, to 25 %. The above parti

    distribution may vary + or15%

    Technical Services :

    We also offer Technical Service and extensive feed back on your oil to be refined and bleached oi

    optimize application of bleaching earth and to get your desired color result. For which a sample ofproduct to be bleached is required from your end.

    Further Information and Technical Advice :

    All data mentioned in this leaflet are typical for this product an based on average values. Cert

    deviations can appear due to processing of natural clays as a raw material. In no case are these val

    to be regarded as specifications. Detailed information concerning application and handling can be ta

    from our material safety data sheet.