Upload
karl-gazeau
View
248
Download
1
Tags:
Embed Size (px)
DESCRIPTION
vannes murales
Citation preview
A B S - Armaturen Waste water system elements
It's the seal that matters
A B S – Armaturen GmbH Waste water system elements
We have been an independent standalone company since the end of 2001. We use our
experience and innovative power to create waste water fittings to match our customers'
requirements.
We offer a complete range of waste water valves and fittings in various materials and
design variations, and also with statics, hydraulic throughflow quantity calculations and on-
site installation if required. We have standard fittings up to nominal size (NS) 1000 mm in
stainless steel (V2A + V4A) in stock. We fulfil the requirements of usage-oriented product
quality at competitive price levels using our complete range of performance, delivery and
service.
Working with our experienced designers and structural engineers, who are fitted out with
the very latest in software programs (CAD systems (AutoCAD2004) and calculation
programs (MathCAD11.0)), we design and produce to current state-of-the-art technology
in a variable modular system (destruction-free installation and dismantling of all wear parts
using standard tools) in compliance with the wastewater valves and fittings Standard DIN
19569 Part 4. Our production department (12 staff) processes the CAD data and carry out
production on the most modern CNC machines available, which also makes production of
spare parts documentation a simple task. The last stage of the production is glass bead
blasting of the stainless steel.
ABS seals are made shape and form-positive in NBR, which leads to low torques and
minimum wear.
ABS drives are all constructed with roller bearings and are specified to customer
requirements ( AUMA, EMG etc).
You will find ABS valves and fittings in sewage works, rainwater retention basins, road
drainage systems and anywhere where wastewater is flowing. . .
ABS - Armaturen GmbH
Udo Dieme Udo Dieme Udo Dieme Udo Dieme General Manager
Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 1
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
Contents Type descriptions Page
Our company 1 Contents 2 + 3 Product selection 4 + 5 Product images 6 + 7 Fittings knowledge + DIN 195569 Part 4 8 Designation code 9 Electrical mobile drive 10 Position indicator device unpowered, digital 6-character display 11 Below-floor drives 12 – 14 Above-floor drives 15 – 22 Drive - Protective covers 23 Plug sluice straight bed sill for grouting in SE3_ 24 Plug sluice with stepped bed, for dowelling on SA3_ 24 Plug sluice round bed for grouting in SR3_ 25 Plug sluice with stepped bed, for dowelling on; for curved structures SA3V 25 Handpull slide gate round bed for grouting in HR4_ 26 Handpull slide gate with stepped bed, for dowelling on H4A 26 Handpull slide gate straight bed sill for grouting in HE4A 27 Handpull slide gate with stepped bed, for dowelling on, for curved structures H4V 28 Threaded slide gate with stepped bed, for dowelling on G4_ 29 Threaded slide gate with round bed for grouting in GR4_ 30 Threaded slide gate with stepped bed, for dowelling on for curved structures G4V 31 Slider flap with stepped bed, for dowelling on SK4_ 32 Flanged threaded slide gate with stepped bed, for flanging on with flange G4P 33 Flanged threaded slide gate with stepped bed, for flanging on without flange G4M 33 Adjustment slide gate with stepped bed, for dowelling on RS4_ 34 Throttling slide gate with stepped bed, for dowelling on D4_ 35 Throttling slide gate with round bed for grouting in DR4_ 35 Channel sluice straight bed sill for grouting in; 3-sided seal RE3_ 36 Channel sluice with stepped bed, for dowelling on; 3-sided seal RA3_ 37 Channel slide gate straight bed sill for grouting in; 4-sided seal RE4_ 38 Channel slide gate with stepped bed, for dowelling on; 4-sided seal RA4_ 39 Descending sluice for dowelling on; 3-sided seal A3_ 40 Descending slide gate for dowelling on; 4-sided seal A4_ 41 Dam arbor closing straight bed sill for grouting in DE_ _ 42 Dam arbor closing round bed for grouting in DR_ _ 43 Dam arbor closing with stepped bed, for dowelling on DA_ _ 43 Dam board closing straight bed sill for grouting in TE_ _ 44 Dam board closing round bed for grouting in TR_ _ 44 Dam arbor - Selection table 45 Backwater flap DN with stepped bed, for dowelling on flat cover R_D 46 Backwater flap W x H with stepped bed, for dowelling on flat cover R_D 47 Backwater flap DN with stepped bed, for dowelling on hollow cover R_H 48 Backwater flap DN with stepped bed, for dowelling on with counterweight R_G 49 Backwater flap DN for insertion in KG sleeve RK_ 50 Pump flap with impact damper; for flanging on with flange R_S 51 Barscreen for dowelling on; for circular and rectangular openings SR_ 52 Overflow barrier gates for dowelling on; for curved and straight structures ÜS_ 53 Overflow wall for dowelling on; for curved and straight structures TW_ _ 54 Baffle plate for dowelling on; for curved and straight structures PTA 55 Baffle plate for grouting in PTE 56 Baffle plate for flanging on with flange PTP 57
Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 2
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
Contents Type descriptions Page
Baffle screens (Mönch) for dowelling on, for curved and straight structures PW 58 Telescope slide gate (Mönch) for flanging on with flange TKS 59 Distribution tongue for dowelling on VZ 60 Overflow weir for dowelling on W3 61 Non-return barrier RF 62 Intermediate flange slide gate insertion between flanges ZS 63 Full flange slide gate as end fitting for flanging on VS 64 Fitted removal piece with 3 flanges lockable P3F 65 Fitted removal piece with 4 flanges lockable P4F 66 Slot plate SS 67 Pipes and moulded pieces FS+ FFS+ MR+ TS 68 FFR - pieces FFR 69 TT - pieces TTS 70 Q - pieces QS 71 N - pieces NS 72 International materials comparison 73 Terms of delivery and payment 74
Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 3
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
Description Cro
ss s
ectio
n Ø
Cro
ss s
ectio
n �� ��
3-si
ded
seal
4-si
ded
seal
stra
ight
bed
sill
roun
d be
d
with
ste
pped
bed
Assembly versionA E K V X Y
Descending slide gate A4_ � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Descending sluice A3_ � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Dam arbor closing DE__ � � � D - E - F - G - H � � � � � �
Dam arbor closing DR__ � � � D - E - F - G - H � � � � � �
Dam arbor closing DA__ � � � A - B - C - D - F - G - H - I � � � � � �
Dam board closing TE__ � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Dam board closing TR__ � � � A - B - C - D - E - F - G - H - I � � � � � �
Throttling slide gate D4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Throttling slide gate DR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �
Flanged threaded slide g. G4P � � � � P � � � � �
Flanged threaded slide g. G4M � � � � M � � � � �
Threaded slide gate G4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �
Threaded slide gate G4V � � � � V - W - X � � � � � �
Threaded slide gate GR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �
Handpull slide gate H4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Handpull slide gate H4V � � � � V - W - X � � � � � �
Handpull slide gate HE4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Handpull slide gate HR4_ � � � � A - B - C - D - E - F - G - H - I � � � � � �
Baffle plate PTA � � A - V � � � � �
Baffle plate PTE � � E - W � � � � �
Baffle plate PTP � � P � � � � �
Baffle screens PW_ � � � F - G - R � � � � �
Pump flap R_S � � � � A - E - F - P - S - V � � � � �
Adjustment slide gate RS4_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Channel slide gate RE4_ � � � D - E - F - G - H - V - W - X � � � � � �
Channel slide gate RA4_ � � � A - B - C - D - F - G - H - I - V - W - X � � � � � �
Channel sluice RE3_ � � � D - E - F - G - H - V - W - X � � � � � �
Channel sluice RA3_ � � � A - B - C - D - F - G - H - I - V - W - X � � � � � �
Non-return barrier RF � � � � � � � �
Backwater flap R_H � � � � A - E - F - P - S - V � � � � �
Backwater flap R_G � � � � A - E - F - P - S - V � � � � � �
Backwater flap RK_ � � � A - E - F - P - S - V � � � � � �
Backwater flap, DN R_D � � � A - E - F - P - S - V � � � � � �
Backwater flap, WxH R_D � � � A - E - P - V � � � � � �
Slider flap SK4_ � � � � A - V � � � � �
Barscreen SR_ � � A - D - E - F - O - Q - R - S - U � � � � �
Plug sluice SE3_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Plug sluice SA3_ � � � � A - B - C - D - E - F - G - H - I - V - W - X � � � � � �
Plug sluice SA3V � � � � V - W - X � � � � � �
Plug sluice SR3_ � � � � A - B - C - D - E - F - G - H - I � � � � � �
Overflow wall TW__ � � � � � � �
01.2005
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110Internet http.//www.ABS-Armaturen.net eMail [email protected] Seite 4
Material
Product selection
Subject to structural and technical changes, dimensions not guaranteed!
A B S - Armaturen GmbH Waste water system elements
A = AlMg3 - F22E = 1.14301K = HDPEV = St 37-2 verz.X = 1.4571Y = 1.4541
Description Cro
ss s
ectio
n Ø
Cro
ss s
ectio
n �� ��
3-si
ded
seal
4-si
ded
seal
stra
ight
bed
sill
roun
d be
d
with
ste
pped
bed
Assembly versionA E K V X Y
Telescpoe slide gate TKS � � � � � � �
Overflow barrier gates ÜS_ � A - B - G � � � � �
Distribution tongue VZ � � � � � � � �
Overflow weir W3 � � � � � � � �
Intermediate flange slide g ZS � � � � � �
Fitted removal piece P3F � � � � � �
Fitted removal piece P4F � � � � � �
Slot plate SS � � � � � �
Pipes + moulded pieces FS � � � � � � � �
Pipes + moulded pieces FFS � � � � � � � �
Pipes + moulded pieces MR � � � � � � � �
Pipes + moulded pieces TS � � � � � � � �
F-F-R-piece FFR � � � � � � � �
TT-piece TTS � � � � � � � �
Q-piece QS_ � � � H - R � � � � �
N-piece NS � � � � � � � �
01.2005
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110Internet http.//www.ABS-Armaturen.net eMail [email protected] Seite 5
Material
Product selection
Subject to structural and technical changes, dimensions not guaranteed!
A B S - Armaturen GmbH Waste water system elements
A = AlMg3 - F22E = 1.14301K = HDPEV = St 37-2 verz.X = 1.4571Y = 1.4541
A = AlMg3 - F22E = 1.14301K = HDPEV = St 37-2 verz.X = 1.4571Y = 1.4541
A B S - Armaturen to DIN 19569 Part 4
The ABS threaded slide gate Type "G4A"
- with stepped bed - for dowelling on - wedge closing - spindle protector - seal replaceable on slider - with cut-out welding
The ABS threaded slide gate Type "GR4A" - with straight, rebate-free opening - bed for grouting in + dowelling - wedge closing - spindle protector - seal replaceable on slider - with cut-out welding
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 6
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S DRIVES to DIN 19569 Part 4
ABS drive Type "V" - rigid plate construction
- stainless, dust and water- tight bearing housing
- spindle on roller bearings replaceable non-destructively - standardised, stainless water external tapered square shaft end size 27/ with square socket size 19 for transportable elect. drive (MEA)
ABS movement indicator for all drives - impact-resistant, ultrasound-welded plastic housing - unpowered, digital 5 mm high display - shows opened lift height directly in "mm" (e.g. for regulating gate valves) ABS drive Type "GV" - rigid wall bracket
- floating output gearing - drive can be dismantled with only 4 bolts - otherwise as drive "V" Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 7
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen Gm bH Waste water system elements
Housingless gates and fittings Standard DIN 19569 Part 4 DIN 19569 Part 4 r efers to the following standards 3 . General characteristics of housing-less gate devices 5.1 Loads and dimensioning 5.1.1 Structural dimensioning of closure construction 5.1.2 Drive dimensioning 5.2.1 Seals 5.2.2 Sealtightness 5.2.3 Drive rods, spindles 5.3 Durability class 5.4 Materials 8. Operation and maintenance 19704-4.2 Loading cases 19704-4.2.1 Normal operational loads (NB) 19704-4.2.2 Special operating loads (BB) 19704-5.3.1.1.b Ice formation in inland waterways 19704-5.10 Frictional forces 19704-5.10.1 Sliding friction coefficients 19704-6.4.1 General stress analysis 19704-6.4.1.1 Riveted and bolted connections 19704-6.4.1.2 Welded connections 19704-6.4.2 Stability tests 19704-6.4.3 Deformation coefficients 19704-6.4.4 Endurance limits 19704-6.5.5.2 Design procedures for flat sheets with bending loading 19704-6.5.4 Tracks 19704-6.6 Permissible stresses 19704-6.6.3 Welded seams 19704-7. Machine components 19704-7.2. Stress analysis 19704-7.2.1 Static 7.2.2 Endurance limits 7.3.1 Shafts DIN 19705-4 Materials DIN 19705-4.1 Materials for steel structures DIN 19705-4.2 Materials for machine components DIN 19705-4.3 Connections DIN 19705-5.1.3 Operation 5.1.3.4 Possibilities of checking for ice formation on locks and seals. DIN 19705-5.2 Design of steel hydraulic components DIN 19705-5.2.3 Bolted connections DIN 19705-5.2.4 Welded connections DIN 19705-5.2.4.2 Cut-out welding DIN 19705-5.2.4.3 Fillet welds DIN 19705-5.2.4.5 Basics of production DIN 19705-5.2.5 Dam walls (slider) m2 DIN 19705-5.2.6.2 Static requirements
DIN 19705-5.2.6.4 Structural requirements DIN 19705-5.3.2 Plane impact and sliding surfaces DIN 19705-5.3.3 Tilt plates and hinges (distribution tongues) DIN 19705-5.4 Seals DIN 19705-5.4.2 Structural types DIN 19705-5.4.3 Fluid mechanics requirements DIN 19705-5.4.4 Replaceability DIN 19705-5.5 Fixed parts DIN 19705-5.5.1 Types of fitting DIN 19705-5.5.3 Loading during installation DIN 19705-5.7 Drives DIN 19705-5.7.3.1 Shafts and axles DIN 19705-5.7.3.2 Counterweight equilibrium DIN 19705-5.7.3.3 Gears DIN 19705-5.7.3.4 Bearings DIN 19705-5.7.3.6 Manual drives DIN 19705-6 Vibrations DIN 19705-6.1.3 Vibrations in undercurrents DIN 19569 Teil1-3 Structures DIN 19569 Teil1-3.1 Dimensional tolerances DIN 19569 Teil1-3.2 Raceways DIN 19569 Teil1-3.2.1 Surface pressure DIN 19569 Teil1-3.3 Connection of technical fittings with the structure DIN 19569 Teil1-4 Technical equipment DIN 19569 Teil1-4.1 Principles of static and mechanical design DIN 19569 Teil1-4.1.1 Loads DIN 19569 Teil1-4.1.1.4 Operational loads DIN 19569 Teil1-4.1.2.1 Capacity, torque DIN 19569 Teil1-4.1.2.2 Application factors DIN 19569 Teil1-4.1.2.3 Designed service life of machine components DIN 19569 Teil1-4.2 General construction characteristics DIN 19569 Teil1-4.2.1 Walkways DIN 19569 Teil1-4.2.8 Materials and corrosion protection DIN 19569 Teil1-4.2.9 Requirements for the production of welded structures. DIN 19569 Teil1-7 Spare parts (wear and reserve parts)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 8
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS designation code
1. Group = fitting type (see list of contents or page 23 onwards)
2 . Group = fitting version (z.B.: A = dowel-mounted; E = grouted-in etc.)
3 . Group = sectional opening DN (circular – dimensions in mm) or B x H (rectangular – dimensions in decimetres)
4 . Group = material code A = AlMg3 – F22
E = 1.4301
K = HDPE
V = St 37-2 galv.
X = 1.4571
Y = 1.4541
5 . Group = drive (e.g. V = tapered square shaft end; SV = valve box etc.)
Example: GR4 A 0600 E – V GR4 = threaded slide gate (page 30) with round bed – no-groove grouted in; otherwise dowelled on
A = dowelled on – see fitting versions on appropriate product sheet
0600 = bore DN 600 (dimensions in mm)
E = material (see above) E = 1.4301
V = drive (see pages 12 – 22)
RE3 D 07x12,5 X – TV
RE3 = channel sluice (page 36)– for no-groove on-site grouting in
D = one sited dowelled on – see fitting versions on appropriate product sheet
07x12,5 = bore B x H (dimensions in dm [decimeter])
X = material (see above) E = 1.4571
TV = drive (see pages 12 – 22)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 9
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
GR4 A 0200 e - V
Drive e.g. V = tapered square shaft end
Material e.g. E = 1.4301
Sectional opening DN or BxH
Fitting versions e.g. A = dowel-mounted
Fitting type e.g. GR4_
Example:
ABS-Armaturen GmbH – Electr. mobile drive to Euro Norm 50144 Part 1
Accident prevention system using two interlinked power switches in handles Specifications Weight: 5.5 kg Torque: 20-130 Nm Width: 640 mm Height: 300 mm Materials used Housing: aluminium 4m long power cable Electrical data: air- cooled universal motor Rated voltage: 230 V, 50 Hz Rated current : 5.6 A Power rating :1200 W Nominal speed : 75 rpm Fittings 1. Two power switches 2. Infinitely variable potentiometer 3 . Revolution counter 4 . Reset button counter 5 . Alignment spirit level 6. Secured tool square end size 19 Patented accessories/stainless steel A. Adapter for square protector 27/32 B. Telescopic wrench handle C. Adapter for 19mm wrench D. Adapter for 27mm wrench E. 3-spoked handwheel receptacle F. 4-spoked handwheel receptacle G. 5-spoked handwheel receptacle H. Aluminium machine case I. V2A foot stands above 100 Nm J. V2A sack barrow K. Emergency generator 2 kW/32 kg L. Higher torques up to 180 Nm M. Wrench adapters 12 - 27 mm Tender text Electric mobile drive, continuous running (air cooled) with 230 V/50 Hz incl. 4m cable and earthed socket, max. 6 kg service weight. Accident prevention system using using two interlinked power switches in handles and automatic electrical cutoff once infinitely variable adjustable torque of between 20 and 130 Nm has been reached. Counter for right-hand and left-hand running with reset button. Accessories from A bis L
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 300510 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 10
• Emergency drive
• 130 Nm torque
• 230 V/ 50 Hz, earthed socket
• counter right/left
• alu- housing (rustproof)
• 5.5 kg service weight
• operationally safe using two independent power switches
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
Torque adjustment
01234 6
78910
50: 30 Nm 6: 90 Nm 1: 40 Nm 7: 100 Nm 2: 50 Nm 8: 110 Nm 3: 60 Nm 9: 120 Nm 4: 70 Nm 10: 130 Nm 5: 80 Nm
A B S – Armaturen GmbH Waste water system elements
ABS position indicator device This position indicator device has everything you need!
- no power, purely mechanical.
- installed directly below drive tapered square shaft end
- impact-resistant plastic housing ultrasound-welded.
- 6-figure display shows opening in mmFor regular threads Tr24x5, Tr40x7, Tr50x9.
- 5 mm high display numbers
- can be retrofitted!
- maintenance-free! _____________________________
Closed position = Display 000000
Open position = Display 001750
The valve has opened 175 mm. _____________________________ Application:
anywhere where the valve cannot be seen, e.g.:precast manholes, road valve boxes etc
for adjustment and throttling slide gates to set lift to be opened for intended outflow.
for descending sluices in order to determine spillway or spillway quantity.
________________________________________________________________________ The position indicator advice is worth using, not just because of its low price, but because
it prevents the valve being overtightened when closing (Position indicator device closed =000000).
Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 11
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS Below-floor drives to DIN 19569 Part 4
00000
max.30° max.30°
100
100
X
X
V UV
Floor Floor
FloorFloor
W AF27/32
W AF27/32
square19
Roller bearing below-floor drive with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing below-floor drive with stainless cardan joint and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
GV GK
X
WAF27/32
100
F loorFloor
300
F loorFloor
Roller bearing below-floor drive with spur gear unit and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing below-floor drive bevel gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 12
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Below-floor drives to DIN 19569 Part 4
GMK GME
Floor Floor Floor Floor
Roller bearing below-floor drive with bevel gear, pressure-tight wall passage and extended stainless steel hand crank
Roller bearing below-floor drive with bevel gear, pressure-tight wall passage and electric actuator
E
900
EM
FloorFloor
Floor
Roller bearing below-floor drive with electric or pneumatic actuator
Explosion-protected drive with on-site control for operation extended from explosion protection zone Cable length: with RWG = max. 100m with MWG = max. 10m
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 13
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Below-floor drives to DIN 19569 Part 4
270
270
50
X
G SVSV
F loor
F loor F loor
W AF27/32
Roller bearing below-floor drive in street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square ends (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing below-floor drive with spur gear unit and street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square ends (ratchet)
G R SV
270
F loorF loor
X
G E
Floor
Ceiling
Roller bearing below-floor drive with spur gear unit, pressure-tight tube column and street casing with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing below-floor drive with bevel gear and electric actuator
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 14
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
15010
0
X
H MV
Floor Floor
Floor
W AF27/32
Roller bearing above-floor drive with handwheel x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive on wall deck with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
100
M10
GKR GKL ME
X
F loor FloorFloor Floor
Roller bearing above-floor drive on wall deck with bevel gear with right-hand extended stainless steel hand crank. Optionally available in left-hand version (GKL) x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive on wall deck with electric or pneumatic actuator X = Hight dependent on motor type
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 15
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
900
900
X
WV WH
FloorFloor FloorFloor
WAF27/32
Roller bearing above-floor drive with wall-floor column and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with wall-floor column and handwheel x = optionally with position indicator device (see P. 11)
900
900
X
W GK W GKLW GKR
Floor Floor Floor Floor
Roller bearing above-floor drive with wall-floor column and bevel or worm gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with wall-floor column and bevel or worm gear and right-hand extended stainless steel hand crank Optionally available in left-hand version (WGKL) x = optionally with position indicator device (see P. 11)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 16
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
900
900
WGE WE
Floor Floor FloorFloor
Roller bearing above-floor drive with wall-floor column, bevel gear and electric actuator
Roller bearing above-floor drive with wall-floor column and electric or pneumatic actuator
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 17
Subject to structural and technical changes, dimensions not guaranteed! 01.2004
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
Floor
900
WAF27/32
X
900
F loor
X
FV FH
Roller bearing above-floor drive with stand-floor column and stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with stand-floor column and handwheel x = optionally with position indicator device (see P. 11)
Floor Floor
900
F loor
900
X
FGK FE
Roller bearing above-floor drive with stand-floor column and bevel or worm gear and stainless steel hand crank x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with stand-floor column and electric or pneumatic actuator
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 18
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4 90
0
X X
THTV
W AF27/32
Floor FloorFloor
900
F loor
Roller bearing above-floor drive on cross beam with stainless outside square cone WAF27/ 32 and inside square WAF19 for mobile drives or tool square end (ratchet) x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with cross beam and handwheel x = optionally with position indicator device (see P. 11)
900
900
TGKM TE
X
FloorFloor
FloorFloor
Roller bearing above-floor drive with cross beam, central bevel gear with stainless steel hand crank x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with cross beam and electric or pneumatic actuator
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 19
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
900
900
X
TGKLTGKR TGELTGER
Floor FloorFloor
Roller bearing above-floor drive with cross beam, bevel gear and right-hand side extended stainless steel hand crank Optionally available in left-hand version (TGKL) x = optionally with position indicator device (see P. 11)
Roller bearing above-floor drive with cross beam, bevel gear and right-hand side extended electrical actuator Safety covering to UVV Optionally available in left-hand version (TGEL)
900
900
T2GH T2GK
Floor
Floor
2-spindle Roller bearing above-floor drive with cross beam, bevel gears and handwheel Safety covering to UVV
2-spindle Roller bearing above-floor drive with cross beam, bevel gears and stainless steel hand crank Safety covering to UVV x = optionally with position indicator device (see P. 11)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 20
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
900
900
T3GELT3GER T4GKLT4GKR
FloorFloor
Roller bearing above-floor drive with cross beam with central bevel gear, right-hand side extended bevel gear in addition to bevel gear at operating height with electrical actuator. - Safety covering to UVV Optionally available in left-hand version (T3GEL)
Roller bearing above-floor drive with cross beam, bevel gears, right-hand side extended bevel gear in addition to bevel gear at operating height with stainless steel hand crank. - Safety covering to UVV Optionally available in left-hand version (T4GKL)
900
900
T3GKLT3GKR T4GELT4GER
FloorFloor
Roller bearing above-floor drive with cross beam with central bevel gear, right-hand side extended bevel gear in addition to bevel gear at operating height with stainless steel hand crank. - Safety covering to UVV Optionally available in left-hand version (T3GKL)
Roller bearing above-floor drive with cross beam, bevel gears, right-hand side extended bevel gears in addition to bevel gears at operating height with electrical actuator. - Safety covering to UVV Optionally available in left-hand version (T4GEL)
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110 Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 21
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Above-floor drives to DIN 19569 Part 4
900
900
T2GE TZ
Floor
Floor Floor
2-spindle Roller bearing above-floor drive with wall-floor column, bevel gears and electric actuator Safety covering to UVV
Above surfave drive with cross beam and pneumatic or hydraulic cylinder
SS EBG
100
270
F loor
W AF
Tub
e ov
erla
p
Drive with rapid-closing lever Telescopic mounting accessories for
underground fittings
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 22
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
A B S – Armaturen GmbH Waste water system elements
ABS Drive-Protective covers – H _
Type: -H1
Torsionally rigid swivel cover for gears
Optionally with lock
Type: -H2
Torsionally rigid swivel cover for actuators
Optionally with lock
Type: -H3
Torsionally rigid rectangular or circular housing
Optionally with lock 01.2005 Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 23
Subject to structural and technical changes, dimensions not guaranteed!
900
A B S – Armaturen GmbH Waste water system element s
Sto
rag
e le
vel +
pa
ne
l he
igh
t
Fra
me
he
igh
t
C lear w idth
Fram e w id th
Ha
nd
leA
A
Ha
nd
le
Fram e w idth
Clear w id th
Fra
me
he
igh
t
Sto
rag
e le
vel +
pa
ne
l he
igh
t
AC
on
du
it d
ep
th
Co
nd
uit
de
pth
he
igh
t
he
igh
tS
tep
pe
db
ed
ABS PLUG SLUICE Type: SE3 _ + SA3_ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 2 For grouting into rebates to DIN 19556 or
dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames.
Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening- ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction.
HDPE slide rails = Bolted onto slider plate, can be readjusted.
Optional = Locking device = Pre-rounded to manhole diameter
CAUTION = Manual pulling power is sufficient for only max. 1m x 1m gate area.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 24
Dowelling with stepped bed
01.2005
No-groove grouting
Type: SE3 _ Type: SA3 _
Assem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system eleme nts
Clear w id th
Ha
nd
le
Fram e w id th
AA
A
Sto
rag
e le
vel +
pa
ne
l he
igh
t
Fra
me
he
igh
t
Co
nd
uit
de
pth
Clear w idth
Ha
nd
le
Fram e w idth
Sto
rag
e le
vel +
pa
ne
l he
igh
t
Fra
me
he
igh
t
Co
nd
uit
de
pth
Ste
pp
ed
be
d
he
igh
t
he
igh
t
ABS PLUG SLUICE Type: SR3 _ + SA3_ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 2 For grouting into rebates to DIN 19556 or
dowelling onto structures with flat surfaces in a ccordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames.
Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening- ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
HDPE slide rails = Bolted onto slider plate, can be readjusted.
Optional = Locking device = Pre-rounded to manhole diameter
CAUTION = Manual pulling power is sufficient for only max. 1m x 1m gate area.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 25
Dowelling with stepped bed
01.2005
No-groove grouting
Type: SR3 _ Type: SA3 V
Assem bly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
20
0
200 200
Co
nd
uit
de
pth
Fram e w id th
Lift
ing
he
igh
tG
ag
e le
ng
th
70
Ste
pp
ed
be
d1
06
FloorFloor
Ga
ge
len
gth
Lift
ing
he
igh
t
Fram e w id th
Grout on site
DN
o.
WxH
ABS HANDPULL SLIDE GATE Type: HR4 _ + H4_ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat surfac es in accordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Optional = Pre-rounded to fit manhole diameter Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 26
01.2005
Type: HR4 _ Type: H4 A
Assem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
Ga
ge
len
gth
Lift
ing
he
igh
t5
0
10
0
70Floor
Fram e w id th
Co
nd
uit
de
pth
DN
o.
WxH
ABS HANDPULL SLIDE GATE Type: HE4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 Bed no-groove grouting, otherwise dowel onto struct ure with flat surfaces in accordance
with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Optional = Pre-rounded to fit manhole diameter Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 27
01.2005
Assem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
10
0
Ga
ge
len
gth
1 0 0
20
0
2 0 0 2 0 0
Co
nd
uit
de
pth
Fra m e w id th
Lift
ing
he
igh
tS
tep
pe
d B
ed
10
6
DN
o.
BxH
10
0
Ø Se w e r
ABS HANDPULL SLIDE GATE Type: H4 V to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto structures with rounded, flat surfaces in accordance
with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 28
01.2005
Subject to structural and technical changes, dimensions not guaranteed!
Assembly versions
A B S – Armaturen GmbH Waste water system elements
ABS THREADED SLIDE GATE Type: G4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal C lass 4
For dowelling with stepped bed onto struc tures with flat surfaces in accordance with DIN 182 02 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 29
01.2005
20
0
200 200
Co
nd
uit
de
pth
Fram e w id th
Lift
ing
he
igh
t
70
Ste
pp
ed
be
d1
06
Fitt
ing
de
pth
DN
o.
WxH
Assem bly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS THREADED SLIDE GATE Type: GR4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Cl ass 4
Bed no-groove grouting, otherwise dow el onto structure with flat surfaces in accordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Bed = The bed plate is rolled to the nominal diameter radius and welded to the frame. Particularly suitable for storm water channels and masonry manholes. slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and foodsafe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 30
01.2005
Assem bly versions
10
0
DN
70
80
25
Co
nd
uit
de
pth
Fitt
ing
de
pth
Lift
ing
he
igh
t
Fram e w id thGrout on site
No groove
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS THREADED SLIDE GATE Type: G4 V to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto struct ures with rounded, flat surfaces in accordance with
DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals!
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 31
01.2005
Assem bly versions
70
Fitt
ing
de
pth
DN
o.
WxH
10
6S
tep
pe
d b
ed
Lift
ing
he
igh
t
Fram e w id th
Co
nd
uit
de
pth
200200
20
0
70
Ø Sewer
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS SLIDER FLAP Type: SK4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against withdrawing and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 32
01.2005
7 0
DN
7056
5 - 1 0 °Lift
ing
he
igh
tS
tep
pe
d b
ed
Co
nd
uit
de
pth
Fitt
ing
de
pth
Tip - o ve r p re ve n tio n
F ittin g le n g th
F ra m e w id th
Assem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS FLANGED THREADED SLIDE GATE Type: G4 P + G4M to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For flange connections with and without fl ange to EN 1092 PN10
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes. = slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction.
Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 33
01.2005
Co
nd
uit
de
pth
Fitt
ing
de
pth
DN
70
X
10
6
Ste
pp
ed
be
d
Fitt
ing
de
pth
Y
S
Y+ 70
Lift
ing
he
igh
t
Fram e width
Co
nd
uit
de
pth
DN
Circular or flatsewer wall
Circular or flatsewer wall
Please state! X
Subject to structural and technical changes, dimensions not guaranteed!
Type: G4 P Type: G4 M
A B S – Armaturen GmbH Waste water system elements
ABS ADJUSTMENT SLIDE GATE Type: RS4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat sur faces in accordance with DIN 18202 Tab.3
or for on-site grouting into rebates to DIN 1955 6
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the undercurrent outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three or four sides.
Drive = Adjustable to plumb
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 34
01.2005
Assembly versions
Subject to structural and technical changes, dimensions not guaranteed!
Fitt
ing
de
pth
10
6S
tep
pe
d b
ed
70
Lift
ing
he
igh
t
Fram e w id th
Co
nd
uit
de
pth
200200
20
0
Seal
Clear w id th
HDPE g lide strip
Clear w id th
HDPE g lide strip
Coach b olt
Guide fram e
Slider p late
Guide fram e
Coach b olt
Slider p late
Seal
DN
o.
WxH
A B S – Armaturen GmbH Waste water system elements
ABS THROTTLING SLIDE GATE Type: D4 _ + DR4_ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frames which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Position indicator device = Shows opening in "mm". Hydraulic = For intended outflow of __ l/s at water head (WSV or WSR) of __ mm.
calculation Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 35
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
20
0
200 200
Co
nd
uit
de
pth
Fram e w id th
Lift
ing
he
igh
t70
Ste
pp
ed
be
d1
06
Fitt
ing
de
pth
00000
Square
DN
o.
WxH
A s s e m b ly ve rs io n s
A B S – Armaturen GmbH Waste water system elements
ABS CHANNEL SLUICE Type: RE3 _ to DIN 19569 Part 4
Sealing on three sides in accordance with Sea l Class 3
For no-groove, on-site grouting into rebates to DIN 19556
Torsionally rigid = Section is cold worked and grouted in on site. single-part frames Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 36
01.2005
90
0C
on
du
it d
ep
th
Sto
rag
e le
vel +
p
an
el h
eig
ht
Clear w idth + 160
Fram e w idthClear w idth
80
80
Lift
"Bed seal"
W SR
70
W SV
A ssem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS CHANNEL SLUICE Type: RA3 _ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Class 3
For dowelling with stepped bed onto structures with flat surfaces in accordance with DI N 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 37
01.2005
Lift
Co
nd
uit
de
pth
Fram e w idth
Clear w idth
Sto
rag
e le
vel +
pa
ne
l he
igh
t
90
0
W SV
"Bed seal"
W SR
Assem bly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS CHANNEL SLIDE GATE Type: RE4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For no groove, on-site grouting into rebates to DIN 19556
Torsionally rigid = Section is cold worked and grouted in on site. single-part frames Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 38
01.2005
Co
nd
uit
de
pth
90
0
Lift
ing
he
igh
t
C lear w id thFram e w id th
Clear w id th + 160
80
Gro
utin
g h
eig
ht
80
Min
imu
m 1
00
Cle
ar
he
igh
t
"Bed seal"
"Horizontal seal"
70
W SV
W SR
Subject to structural and technical changes, dimensions not guaranteed!
Assem bly versions
A B S – Armaturen GmbH Waste water system elements
ABS CHANNEL SLIDE GATE Type: RA4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling with stepped bed onto structures with flat surfaces in accordance with DI N 18202 Tab.3
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames. Slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. = Slider plate seal does not require plant to be pumped out when replacing seals! Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Wedge closing = Safe, low-wear closing type for soft seal fittings.
Drive = Adjustable to plumb
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 39
01.2005
90
0
Fram e w id th
Lift
ing
he
igh
t
Clear w id th
Co
nd
uit
de
pth
Min
imu
m 1
00
"Bed seal"
Cle
ar
he
igh
t
"Horizontal seal"
70
W SR
W SV
Assem bly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS DESCENDING SLUICE Type: A3 _ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 3 For dowelling onto structures with flat surface s in accordance with DIN 18202 Tab.3
or for on-site grouting into rebates to DIN 19 556
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the overflow outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three sides.
Limit stops = Destruction-free removable limit stops for "open" and "closed".
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 40
01.2005
Clear w id th
HDPE g lide strip
HDPE g lide strip
M1
0M
10
M1
0
Co
nd
uit
de
pth
90
0
De
sce
nd
ing
fr
ee
sp
ac
e
Fram e w id th
Clear w id th
M1
0
Clear w id th
Coach bolt
Coach bolt
De
sce
nd
ing
lift
Slider p la te
Slider p la te
Seal
Seal
Sto
rag
e le
vel +
pa
ne
l he
igh
t Guide fram e
Guide fram e
Assem b ly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen Gm bH Waste water system elements
ABS DESCENDING SLIDE GATE Type: A4 _ to DIN 19569 Part 4
Sealing on four sides in accordance with Seal Class 4 For dowelling onto structures with flat surfac es in accordance with DIN 18202 Tab.3
or for on-site grouting into rebates to DIN 19 556
Torsionally rigid = Section is cold worked and stiffened using welded anchor tabs single-part frame which grip across the frames.
slider plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) with welded-on strengthening ribs designed for sectional welding processes.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against extraction and can be unbolted without destruction. Regulation = of the overflow outlet quantity using adjustable wedge slide rail, which guarantees linear constant seal pressure which acts on three or four sides.
Limit stops = Destruction-free removable limit stops for "open" and "closed".
Drive = Adjustable to plumb Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 41
01.2005
Fram e w id th
Clear w id th
Cle
ar
he
igh
t
HDPE g lide strip
De
sce
nd
ing
fre
e s
pa
ce
90
0
De
sce
nd
ing
lift
Min
imu
m 1
00
Co
nd
uit
de
pth
Coach bolt
M1
0M
10
Clear w id th
Clear w id th
HDPE g lide strip
Coach bolt
Guide fram e
Guide fram e
Slider p late
Slider p late
Seal
Seal
Assem bly versions
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS DAM ARBOR CLOSING Type: DE _ _ + DR_ _ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 1 For grouting into rebates to DIN 19556
Guide frame = U-section cold worked and grout in on site. Bed sill = No-groove grout in on site. Stoplog device = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Bed arbor with bed seal for further arbors with arbor seal for any outlet side. Oak arbors possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents top arbor floating up in flood conditions. Pressing device = Presses in each case the upper dam arbor.
Arbor lifter (2 pieces) = For placing or removing the dam arbors.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 42
C lear w id th
Co
nd
uit
de
pth
Ma
x. s
tora
ge
leve
l
Fra
me
he
igh
t
Doub le sid ed sea l fo r c hang ing flow d irec tion
O ne sea l and one p ressu re ra il fo r s ing le flow d irec tion
W SV
W SV
W SR
30
0
5 0
A LU1
15
0
9 0
22
5
150
A LU2
ALU3
W id th
Oak tree
V2A+ V4A
W id th
A rb o r typ es
Grout on siteO p tiona lly w ithre lie f g a te
O p tiona lly w ithp ressing d evic e
A lM g Si 0 ,5- F228 ,51 kg /m
A lM g Si 0 ,5- F227,26 kg /m
A lM g Si 0 ,5- F2211,17 kg /m
800 kg /m ³Dry
Floor
Bed sea l
Typ e : DE2E
Typ e : DE1E
Horizonta l sea l
He
igh
tH
eig
ht
Type: DE2E
Type: DE1E
Assem bly versions
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS DAM ARBOR CLOSING Type: DA _ _ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 1 For dowelling with stepped bed onto stru ctures with flat surfaces in accordance with DIN 18 202 Tab.3
Guide frames = U-sections cold worked and stiffened with welded anchor tabs. Bed section = For grouting on with stepped bed. Stoplog device = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Bed arbor with bed seal for further arbors with arbor seal for any outlet side. Oak arbors possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents top arbor floating up in flood conditions. Pressing device = Presses in each case the upper dam arbor. Arbor lifter (2 pieces) = For placing or removing the dam arbors.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 43
01.2005
M10
C le a r w id th
Co
nd
uit
de
pth
Ma
x. s
tora
ge
leve
l
Fra
me
he
igh
t
W SV
W SV
W SR3
00
5 0
A L U 1
15
0
9 0
22
5
1 5 0
A L U 2
A L U 3
He
igh
tW id th
O a k tre e
Ste
pp
ed
be
d
A rb o r typ e sFlo o r
W id th
V 2 A + V 4 A
He
igh
t
A lM g S i 0 ,5 - F2 2
D ry8 0 0 k g /m ³
1 1 ,1 7 k g /m
A lM g S i 0 ,5 - F2 2
A lM g S i 0 ,5 - F2 2
7 ,2 6 k g /m
8 ,5 1 k g /m
B e d s e a l
D o u b le s id e d se a l fo r c h a n g in g flo w d ire c tio n
O n e se a l a n d o n e p re ssu re ra il fo r s in g le flo w d ire c tio n
Type: DA2A
Type: DA1A
Subject to structural and technical changes, dimensions not guaranteed!
Assem b ly versions
A B S – Armaturen GmbH Waste water system elements
ABS DAM BOARD CLOSING Type: TE _ _ + TR_ _ to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 1 For grouting into rebates to DIN 19556 or
dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab.3
Guide frames = U-section cold worked and grout in on site. Bed sill = no-groove grouting in on site or dowelling on with stepped bed. Stoplog = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR)) and material selection see sketch. Dam board with bed seal and side seal for any outlet side. Oak board possible with tongue and groove (stainless). Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. Outlet rail = Low-wear made in HDPE/black. Bouyancy protection = Prevents dam board floating up in flood conditions. Panel lifter (2 pieces) = Lifting eyes for placing or removing the dam board.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 44
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A ssem b ly vers ions
W SV
W SV
W SR
30
0
50
ALU1
15
0
90
22
5
150
ALU2
ALU3
V2A+ V4A
AlM gSi 0,5-F228,51 kg/m
AlM gSi 0,5-F227,26 kg/m
AlM gSi 0,5-F2211,17 kg/m
800 kg /m ³
Doub le sided seal for changing flow d irection
One seal and one pressure rail for sing le flow d irection
Floor
Ma
x. s
tora
ge
leve
lF
ram
e h
eig
ht
Co
nd
uit
de
pth
Bedseal
Grout on siterelief gate
He
igh
t
W id th
He
igh
t
W id th
Oak tree
Board types
Clear w id th
Optionally w ith
Optionally w ithpressing device
Type: DT2E
Type: DT1E
DryType: TE2E
Type: TE1E
A B S – Armaturen Gmb H Waste water system elements
ABS DAM ARBOR - SELECTON TABLE
Aluminium - dam arbor Al Mg Si 0,5- F22
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 45
ALU 1 ALU 2 ALU 3
Sto
rage
leve
l (m
)
Conduit width (m)
ALU 1
ALU 2
ALU 3
EPDM seal
For a deflection of 1/150 of the conduit width
Max. holdup cross section in utilisation of the permissible tensions
01.2005
SELECTION TABLE
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS BACKWATER FLAP DN Type: R _D to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto str uctures with flat surfaces in accordance with DIN 1 8202 Tab.3
Flanged connections = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and fitted with tip-over prevention.
Option = larger bores and low-pressure flap.
Automatic opening and closing using water head in front and behind flap panel.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 46
01.2005
W idth
A5-10°
Fitting length
He
igh
tW SV
Tip -over p revention
DN
Subject to structural and technical changes, dimensions not guaranteed!
Assem bly versions
doweled flangedcast in clutched doweled doweled cast in
discharge unit
A B S – Armaturen GmbH Waste water system elements
ABS BACKWATER FLAP WxH Type: R _D to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto str uctures with flat surfaces in accordance with DIN 1 8202 Tab.3
Flanged connections = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and fitted with tip-over prevention.
Automatic opening and closing using water head in front and behind flap panel.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 47
01.2005
5-10°W SV
Fitting leng th
Cle
ar
he
igh
t
He
igh
t
Fra
me
he
igh
t
Clear w id th
Fram e w id th
Tip -over prevention
Subject to structural and technical changes, dimensions not guaranteed!
Assem bly versions discharge unit
doweled cast indoweled doweledcast in
A B S – Armaturen GmbH Waste water system elements
ABS BACKWATER FLAP DN Type: R _H to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3 For dowelling with stepped bed onto stru ctures with flat surfaces in accordance with DIN 18 202 Tab.3
Flanged connection = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and form-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Hollow cover = Designed to structural requirements (water head maximum one-sided from front (WSV)). Hollow cover with handle and fitted with tip-over prevention. Hollow cover has filling and draining connections
for filling with antifreeze or sand.
Automatic opening and closing using water head in front and behind flap panel.
Time of flap opening can be influenced by filling the cover.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 48
01.2005
Fitting length W idth
A5-10°
W SV
Tip-over prevention
He
igh
tD
N
Subject to structural and technical changes, dimensions not guaranteed!
Assem bly versions
doweled flangedcast in clutched doweled doweled cast in
discharge unit
A B S – Armaturen GmbH Waste water system elements
ABS BACKWATER FLAP DN Type: R _G to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3
For dowelling with stepped bed onto st ructures with flat surfaces in accordance with DIN 18202 Tab.3
Flanged connection = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and form-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and counterweight
and fitted with tip-over protection. Counterweight has filling and draining connections for filling with antifreeze or sand.
Automatic opening and closing using water head in front and behind flap panel.
Time of flap opening can be influenced by filling the counterweight.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 49
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
W idthFitting length
He
igh
t
5-10°
Swivel
AW SV
space
Tip-over p revention
Pipe length
DN
Assem bly versions
doweled flangedcast in c lutched doweled doweled cast in
discharge unit
A B S – Armaturen GmbH Waste water system elements
ABS BACKWATER FLAP DN Type: RK _ to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3 For insertion in KG sleeves
Flanged connections = with 5-10 ° inclination, welded-on dowel plate and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and form-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Hollow cover = Designed to structural requirements (water head maximum one-sided from front (WSV)). Hollow cover with handle and fitted with tip-over prevention. Hollow cover has filling and draining connections
for filling with antifreeze or sand.
Automatic opening and closing using water head in front and behind flap panel.
Time of flap opening can be influenced by filling the cover.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 50
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
WidthFitting length
WSVH
eig
ht
Tip-over prevention
DN
Assem bly versions
doweled flangedcast in c lutched doweled doweled cast in
discharge unit
A B S – Armaturen GmbH Waste water system elements
ABS PUMP FLAP Type: R _S to DIN 19569 Part 4
Four-sided sealing through protruding water head to Seal Class 3
With impact damper, for flanging onto flan ge in accordance with EN 1092 PN10
Flanged connections = with 5-10 ° inclination, welded-on flange and U-mount console with oval holes, bolted-on U flap holder for adjusting seal pressure.
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive with fine sealing lip. Destruction-free dismantling using stainless steel pressed band with quick-release adapter.
Flap panel = To structural requirements (water head maximum one-sided from front (WSV)) stiffened with welded-on reinforcing ribs and sectional welding processes. Flap panel with handle and fitted with tip-over prevention.
Impact damper = Pneumatic, functions automatically Automatic opening and closing using water head in front and behind flap panel.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 51
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
He
igh
t
Im pact dam per
Fitting leng th
Tip-over p recention
5-10°
W idth
W SV
Flange in accordance w ith EN 1092 PN10
DN
Assem bly versions
doweled flangedcast in c lutched doweled doweled cast in
discharge unit
A B S – Armaturen GmbH Waste water system elements
BarØBar spacingBarØBar spacing
Channel spaceChannel space
Bar spacing angle
Cle
ar th
roug
hflo
w h
eigh
t
Clear throughflow width Clear throughflow width
BarØ
Clear throughflow width
Cle
ar th
roug
hflo
w h
eigh
t
Cle
ar th
roug
hflo
w h
eigh
t10
0
ABS Barscreen Type: SR _ for circular and rectangular openings, for do welling on
Type: SR A Type: SR D Type: SR E
Type: SR Q Type: SR S Type: SR R Barscreens for inclined openings with channel space Type : SRO Type: SR U Type: SR F Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 52
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
DN DN
Bar Ø Bar Ø
100Channel space 100
Bar spacing Bar spacing Bar spacing
100Channel space
Bar Ø
DNDNDN
Bar spacingBarØBarØ
Bar spacingBarØ
Bar spacing
100
100
100D
N w
hen
incl
ined
1:1
,5 (
heig
ht=
1+le
ngth
=1,
5)
A B S – Armaturen GmbH Waste water system elements
ABS OVERFLOW BARRIER GATES Type: ÜS _ to DIN 19558
For curved and straight structures
Overflow height in mm
Outlet quantity in m³/h
30 32,59 25 24,79 20 17,74 15 11,52 10 6,27 5 2,22
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 53
A=
min
d.1
00
S SS
A=
min
d.1
00
S
10
0
H
+2
5-2
5
-25
+2
5
-25
+2
5
-25
+2
5
10
0
A=
min
d.1
00
10
0
10
0
A=
min
d.1
00
H
H H
Sea l Sea l Sea l Sea l
Fixing ra il on s iteFixing ra il on s ite
90° 100 50
50
50
5015050
100
65
15
300 300
+/-
25
min
. 1
20
Flur
min
. 2
20
Tooth form A Tooth form B
Tooth form Y
Straight
01.2005
- By hydraulic oscillation (wind) considerably more evenly outflow
- 24% higher oxygen intake as tooth shape A
Fixings
Sill with clamp holder and anchor rail
Sill with clamp holder for dowelling on
Sill with anchor rail Sill for dowelling on
Subject to structural and technical changes, dimensions not guaranteed!
Sill joint with H-seal
Outflow per metre of barrier gate
Type ÜS_KH Type ÜS_KA Type ÜS_H Type ÜS_A
Type ÜSA Type ÜSB
Type ÜSY Type ÜSG
A B S – Armaturen GmbH Waste water system elements
Ü Ü
S
S
(3 0 0 )
+2
5-2
5
+2
5-2
5
+2
5-2
5
SS
(3 0 0 )
W a te r le v e l W a te r le v e l
W a te r le v e l
W a te r le v e l
He
igh
t
He
igh
t
S e a l S e a l
He
igh
t
He
igh
t
W a ll s p a c in gW a ll s p a c in g
min
.10
0
min
.10
0
ABS OVERFLOW WALL Type: TW _ _ to DIN 19558
For curved or straight structures
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 54
Subject to structural and technical changes, dimensions not guaranteed! 01.2005
Type: TW GA Type: TW GH
Hung from deck underside Elevated
Type: TW RA Type: TW RH
Type: TW GD Type: TW GS Type: TW RD Type: TW RS
Overflow wall joint with H-seal
A B S – Armaturen GmbH Waste water system elements
ABS BAFFLE PLATE Type: PT A
For dowelling onto structures with flat surfaces in accordance with DIN 18202 Tab. 3
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 55
DN EBL e Øg 0080 100 80 220 0100 125 100 250 0125 130 100 275 0150 130 100 300 0175 135 100 325 0200 140 100 350 0250 145 100 400 0300 170 120 450 0350 210 150 500 0400 245 180 550 0450 300 225 600 0500 335 250 700
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
DN
e
EBL
2,5°
Øg
Assem b ly versions
dow eled dow eled
A B S – Armaturen GmbH Waste water system elements
ABS BAFFLE PLATE Type: PT E
With masonry pipes, for flanging on with flange to EN 1092 PN10 or dowelling on.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 56
DN EBL L a b e Øg ØA 0080 300 200 100 150 80 220 180 0100 375 250 100 180 100 250 200 0125 380 250 100 180 100 275 230 0150 430 300 100 230 100 300 260 0175 435 300 100 230 100 325 285 0200 440 300 100 230 100 350 310 0250 445 300 100 230 100 400 365 0300 570 400 150 280 120 450 415 0350 610 400 150 280 150 500 450 0400 645 400 150 280 180 550 500 0450 700 400 150 280 225 600 550 0500 835 500 150 380 250 700 600
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
Assem bly versions
cast in cast in
aD
N
L
e
ØA
b
EBL
2,5°
Øg
Wall deck
A B S – Armaturen GmbH Waste water system elements
ABS BAFFLE PLATE Type: PT P
For flanging onto flanges to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 57
DN EBL e Øg 0080 100 80 220 0100 125 100 250 0125 130 100 275 0150 130 100 300 0175 135 100 325 0200 140 100 350 0250 145 100 400 0300 170 120 450 0350 210 150 500 0400 245 180 550 0450 300 225 600 0500 335 250 700
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
DN
e
EBL
2,5°
Øg
A B S – Armaturen GmbH Waste water system elements
a
AA
e
M1
0M
10
M1
0M
10
EBL
L
60°
30°
Bo
re
TubeØ
W idth
He
igh
t
ABS BAFFLE SCREENS Type: PW _ For dowelling onto circular and straight structures in accordance with DIN 18202 Tab. 3
Type: PW R Type: PW G
S up to DN450mm = 3 thick, above 4 thick
Stable, re-adjustable version for dowelling on to s tructures in accordance with DIN 18202 Tab.3
Type: PW F
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 58
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS TELESCOPE SLIDE GATE Type: TKS to DIN 19569 Part 4
For flange connections with flange to EN 1092 PN 10
Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force positive, protected against withdrawing and can be unbolted without destruction.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 59
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
DN
d
L1L2
L3
900
Drive e.g.floor column with handwheel
Dust and splashproof rollingaxial bearing, stainless
Stainless steel spindle
Spindle nut RG 7
Spindle protection tubeas required
Axial expansion rubber
Core hole
Con
duit
dept
h
Lift
Vertical pipe
Sealing flange
Torque tube / slip tube
Inlet funnel (optional)
Connection to on-site flange to EN 1092 PN 10other connections available
ABS-Armaturen
GmbH ABS DISTRIBUTION TONGUE Type: VZ
to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Class 1 For dowelling onto structures with flat s urfaces in accordance with DIN 18202 Tab.3
Bracket = Blank is cold-worked and stiffened.
Tongue = Without ribs on both sides, smooth tongue walls to structural requirements (water head from maximum one side (WS)) with inside welded reinforcing ribs designed for sectional welding processes.
Seal = Made of NBR, is oil and acid-resistant and food safe. Replaceable non-destructively
Bearing = Rg7 Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 60
M8
M 16
M8
90
0
M 16
M8
M8
M12
M1
2
WS
ma
x.
WS
ma
x.
20
0
20
0
FloorFloor Floor Floor
w orm gearsDrive e.g . floor colum n w ith
Drive e.g . w orm gearsand hand c rank
w ith handw heel in m anhole
Co
nd
uit
de
pth
Co
nd
uit
de
pth
Bla
de
he
igh
t
Bla
de
he
igh
t
Blade leng thBlade leng th W id thW id th SealSeal
Channel w id th outlet
Channel w id th outlet
Channel w id th outlet
Channel w id th outlet
Sw ivelang le
Sw ivelangle
Optional Op tionald issipation console
d issipation console
Ch
an
ne
l wid
th in
let
Ch
an
ne
l wid
th in
let
Le
ng
th
Le
ng
th
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS OVERFLOW WEIR Type: W3 to DIN 19569 Part 4
Sealing on three sides in accordance with Seal Clas s 3 For dowelling onto structures with flat surfa ces in accordance with DIN 18202 Tab.3
Weir plate = To structural requirements (water head maximum one-sided from front (WSV) and from behind (WSR) with welded-on strengthening ribs designed for sectional welding processes. Seal = One-piece, made of NBR is oil and acid-resistant and food safe. Shape and force-positive, protected against extraction and can be unbolted without destruction. CAUTION = If used for wall openings, we must inform you that the side cheeks protrude past the wall thickness and must therefore be stiffened. Optional = For weirs often subject to frost, we recommend the installation of a a cheek and/or weir heater, which switches on off automatically above + 2 °C. Optional = If motor drives are used, or weir is above 1 m high, automatic spindle nut grease lubrication should be used.
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 61
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
110
900
WSP min
WSP max
Hei
ght
Con
duit
dept
h
Clear width
Drive e.g. handwheel
Stainless steel spindle
Spindle protection
Spindle nut RG7
Flat seal
tube as required
Dust and splashproof rollingaxial bearing, stainless
Special profileseal
A B S – Armaturen Gm bH Waste water system elements
ABS NON-RETURN BARRIER Type: RF
Standard version: GG25 housing with EKB coating, flap panel vulcanised all round with EPDM
Type + DN Perm. pressure EBL H TK / No. x thread
in mm in operation in mm in mm in mm
RF 040 10 bar 180 95 ∅110 / 4 x M14
RF 050 10 bar 200 105 ∅125 / 4 x M16
RF 065 10 bar 240 122 ∅145 / 4 x M16
RF 080 10 bar 260 140 ∅160 / 8 x M16
RF 100 10 bar 300 152 ∅180 / 8 x M16
RF 125 10 bar 350 162 ∅210 / 8 x M16
RF 150 10 bar 400 180 ∅240 / 8 x M20
RF 200 10 bar 500 205 ∅295 / 8 x M20
RF 250 10 bar 600 255 ∅350 / 12 x M20
RF 300 10 bar 700 293 ∅400 / 12 x M20
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 62
Flap
Connection flange: to EN 1092 PN 10
H
EBL
Ventilation device
DN
Casing
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS INTERMEDIATE FLANGE SLIDE GATE Type: ZS
Sealing on both sides, for insertion between flanges.
Standard version: GG25 housing with EKB coating, sl ider 1.4301, spindle 1.4104
Type + DN Perm. pressure EBL L H D TK / No. x thread Spindle Torque in mm in operation in mm in mm in mm in mm in mm size in Nm
ZS 0050 10 bar 40 289 120 126 ∅ 125 / 4 x M16 Tr 20 x 4 10 ZS 0065 10 bar 40 316 120 140 ∅ 145 / 4 x M16 Tr 20 x 4 11 ZS 0080 10 bar 50 342 120 184 ∅ 160 / 8 x M16 Tr 20 x 4 12 ZS 0100 10 bar 50 382 120 210 ∅ 180 / 8 x M16 Tr 20 x 4 13 ZS 0125 10 bar 50 416 169 240 ∅ 210 / 8 x M16 Tr 20 x 4 14 ZS 0150 10 bar 60 458 179 260 ∅ 240 / 8 x M20 Tr 20 x 4 15 ZS 0200 10 bar 60 575 240 320 ∅ 295 / 8 x M20 Tr 24 x 5 18 ZS 0250 10 bar 70 676 340 396 ∅ 350 / 12 x M20 Tr 24 x 5 31 ZS 0300 6 bar 70 778 340 468 ∅ 400 / 12 x M20 Tr 28 x 5 40 ZS 0350 6 bar 96 906 430 512 ∅ 460 / 16 x M20 Tr 28 x 5 62 ZS 0400 6 bar 100 1012 430 584 ∅ 515 / 16 x M24 Tr 30 x 6 70 ZS 0450 5 bar 106 1096 530 616 ∅ 565 / 20 x M24 Tr 35 x 6 105 ZS 0500 4 bar 110 1210 530 680 ∅ 620 / 20 x M24 Tr 40 x 7 125 ZS 0600 4 bar 110 1418 630 800 ∅ 725 / 20 x M27 Tr 40 x 7 168 ZS 0700 3 bar 110 1605 730 910 ∅ 840 / 24 x M27 Tr 50 x 8 225 ZS 0800 3 bar 110 1745 850 1020 ∅ 950 / 24 x M30 Tr 50 x 8 370 ZS 0900 3 bar 110 1980 1090 1115 ∅1050 / 28 x M30 Tr 50 x 8 450 ZS 1000 3 bar 110 2190 1190 1220 ∅1160 / 28 x M33 Tr 60 x 9 580 ZS 1200 3 bar 150 2735 1390 1494 ∅1380 / 32 x M36 Tr 60 x 9 750
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 63
Spindle protection in case of rising spindle
Bearing retainer
Rising / non-rising
Spindle
Adjustable PTFE seal
incl. flange seal
Connection drillhole template to EN 1092 PN10
L
DN EBL
H
D
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
01.2005
ABS Fitted removal piece Type: P3F
Half number of threaded rods also possible!
Standard version: Ho using in steel or stainless steel, seal in NBR or E PDM, Threaded anchors and nuts in stainless steel
DN
mm
max. pressure
bar
S EBL
mm
X +/-
mm
TK / No. x thread x L
mm
Weight
kg thick mm
red. mm
0040 PN 16 14 10 180 25 ∅110 / 4 x M14 x 280 9,5 0050 PN 16 18 10 180 25 ∅125 / 4 x M16 x 280 11 0065 PN 16 18 15 180 25 ∅145 / 4 x M16 x 280 13 0080 PN 16 20 15 200 25 ∅160 / 8 x M16 x 310 17 0100 PN 16 20 15 200 25 ∅180 / 8 x M16 x 310 21 0125 PN 16 22 15 200 25 ∅210 / 8 x M16 x 310 26 0150 PN 16 22 15 200 25 ∅240 / 8 x M20 x 320 35 0200 PN 10 26 15 220 25 ∅295 / 8 x M20 x 340 49 0250 PN 10 26 15 220 25 ∅350 / 12 x M20 x 360 65 0300 PN 10 26 18 220 25 ∅400 / 12 x M20 x 360 73 0350 PN 10 26 18 230 25 ∅460 / 16 x M20 x 360 97 0400 PN 10 26 18 230 25 ∅515 / 16 x M24 x 370 125 0450 PN 10 26 18 250 25 ∅565 / 20 x M24 x 390 140 0500 PN 10 28 18 260 25 ∅620 / 20 x M24 x 390 162 0550 PN 10 28 20 260 25 ∅675 / 20 x M27 x 410 195 0600 PN 10 28 23 260 25 ∅725 / 20 x M27 x 410 205 0650 PN 10 30 23 260 25 ∅780 / 24 x M27 x 410 237 0700 PN 10 30 23 260 25 ∅840 / 24 x M27 x 410 260 0800 PN 10 32 23 290 25 ∅950 / 24 x M30 x 460 355 0900 PN 10 34 28 290 25 ∅1050 / 28 x M30 x 460 408 1000 PN 10 34 28 290 25 ∅1160 / 28 x M33 x 480 450 1100 PN 10 38 28 300 25 ∅1270 / 32 x M33 x 480 585 1200 PN 10 38 28 320 25 ∅1380 / 32 x M36 x 520 750 1300 PN 10 42 340 25 ∅1490 / 32 x M39 x 530 912 1400 PN 10 42 360 25 ∅1590 / 36 x M39 x 560 1035 1500 PN 10 46 380 25 ∅1700 / 36 x M39 x 590 1162 1600 PN 10 46 390 25 ∅1820 / 40 x M45 x600 1520 1800 PN 10 50 400 25 ∅2020 / 44 x M45 x630 1830 2000 PN 10 54 410 25 ∅2230 / 48 x M45 x640 2280 2200 PN 10 58 430 25 ∅2440 / 52 x M52 x700 2790 2400 PN 10 62 440 25 ∅2650 / 56 x M52 x710 3510
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 65
XX
S
EBL
TK
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
01.2005
ABS Fitted removal piece Type: P4F
Half number of threaded rods also possible!
Standard version: Ho using in steel or stainless steel, seal in NBR or E PDM, Threaded anchors and nuts in stainless steel
DN
mm
max. pressure
bar
S EBL
mm
X +/-
mm
TK / No. x thread x L
mm
Weight
kg thick mm
red. mm
0040 PN 16 14 10 300 25 ∅110 / 4 x M14 x 250 12,5 0050 PN 16 18 10 300 25 ∅125 / 4 x M16 x 250 15 0065 PN 16 18 15 300 25 ∅145 / 4 x M16 x 250 18 0080 PN 16 20 15 300 25 ∅160 / 8 x M16 x 250 22,5 0100 PN 16 20 15 300 25 ∅180 / 8 x M16 x 250 28 0125 PN 16 22 15 300 25 ∅210 / 8 x M16 x 250 34 0150 PN 16 22 15 350 25 ∅240 / 8 x M20 x 290 48 0200 PN 10 26 15 350 25 ∅295 / 8 x M20 x 290 64 0250 PN 10 26 15 350 25 ∅350 / 12 x M20 x 290 88 0300 PN 10 26 18 350 25 ∅400 / 12 x M20 x 290 103 0350 PN 10 26 18 350 25 ∅460 / 16 x M20 x 290 125 0400 PN 10 26 18 375 25 ∅515 / 16 x M24 x 320 160 0450 PN 10 26 18 375 25 ∅565 / 20 x M24 x 320 176 0500 PN 10 28 18 375 25 ∅620 / 20 x M24 x 320 198 0550 PN 10 28 20 400 25 ∅675 / 20 x M27 x 340 248 0600 PN 10 28 23 400 25 ∅725 / 20 x M27 x 340 268 0650 PN 10 30 23 400 25 ∅780 / 24 x M27 x 340 292 0700 PN 10 30 23 400 25 ∅840 / 24 x M27 x 340 335 0800 PN 10 32 23 450 25 ∅950 / 24 x M30 x 380 455 0900 PN 10 34 28 450 25 ∅1050 / 28 x M30 x 380 522 1000 PN 10 34 28 475 25 ∅1160 / 28 x M33 x 420 635 1100 PN 10 38 28 475 25 ∅1270 / 32 x M33 x 420 744 1200 PN 10 38 28 525 25 ∅1380 / 32 x M36 x 450 984 1300 PN 10 42 550 25 ∅1490 / 32 x M39 x 450 1185 1400 PN 10 42 550 25 ∅1590 / 36 x M39 x 470 1256 1500 PN 10 46 550 25 ∅1700 / 36 x M39 x 470 1472 1600 PN 10 46 600 25 ∅1820 / 40 x M45 x 490 1895 1800 PN 10 50 650 25 ∅2020 / 44 x M45 x 530 2305 2000 PN 10 54 700 25 ∅2230 / 48 x M45 x 560 2800 2200 PN 10 58 700 25 ∅2440 / 52 x M52 x 600 3488 2400 PN 10 62 700 25 ∅2650 / 56 x M52 x 600 4080
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 66
Subject to structural and technical changes, dimensions not guaranteed!
XX
S
TK
EBL
A B S – Armaturen GmbH Waste water system elements
ABS SLOT PLATE Type: SS
Versions: • with smooth sealing surface on both sides (steel, V2A, V4A) • with smooth sealing surface and rubberised sealing surface (NBR) • with rubberised sealing surface on both sides (NBR)
PN 6 PN 10 PN 16 DN b L ∅ s Weight ∅ s Weight ∅ s Weight
0010 20
110
0030 4 0045 4 045 4 0015 25 0040 4 0045 4 045 4 0020
30
0050 4 0058 4 058 4 0026 0060 4 0068 4 068 4 0032 0070 4 0078 4 078 4 0040 0080 4 0088 4 088 4 0050 0090 4 0102 4 102 4 0065 0110 4 0122 5 122 5 0080
40
0130 4 0138 5 138 5 0100
170
0150 5 0160 6 160 6 0125 0180 5 0188 8 188 8 0150 0205 8 0212 8 212 10 0200 0260 8 0268 8 288 12 0250 0315 10 0320 10 320 14 0300 0365 10 0375 12 375 16 0350
50
0416 12 0435 14 435 18 0400 0465 14 0482 16 490 20 0500 0570 16 0585 20 610 25 0600
240
0670 20 0685 24 725 30 0700 0775 22 0800 28 785 34 0800 0880 24 0905 32 900 38 1000
80 1080 30 1110 34
1200 1295 38 1330 45
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 67
Ø
L
b
b /2
b/2
s d ick
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
L1
S
DN
Ød
1
ØD
ØD
Ød
1
DN
S
L2
L4
S
DN
Ød
1
ØD
ØD
Ød
1
DN
S
L3
150
Ød
H
TK
/ N
o.
x th
rea
d
TK
/ N
o.
x th
rea
d
TK
/ N
o.
x th
rea
d
TK
/ N
o.
x th
rea
d
W all deck
ABS PIPES AND MOULDED PIECES For flanging on or grouting in, flanges to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 68
DN øD TK / No. x thread S
ød1 L1 L2 L3 L4 øD H thick red.
0050 165 Ø125 / 4 x M16 18 10 18 150 300 300 240 150 110 0065 185 Ø145 / 4 x M16 18 15 18 150 300 300 260 170 120 0080 200 Ø160 / 8 x M16 20 15 18 150 300 300 280 180 130 0100 220 Ø180 / 8 x M16 20 15 18 150 300 300 300 200 140 0125 250 Ø210 / 8 x M16 22 15 18 175 350 350 340 230 160 0150 285 Ø240 / 8 x M20 22 15 22 175 350 350 370 260 180 0175 315 Ø270 / 8 x M20 24 15 22 175 350 350 410 285 200 0200 340 Ø295 / 8 x M20 26 15 22 175 350 350 430 310 220 0250 395 Ø350 / 12 x M20 26 15 22 200 400 400 500 365 250 0300 445 Ø400 / 12 x M20 26 18 22 200 400 400 550 415 280 0350 505 Ø460 / 16 x M20 26 18 22 200 400 400 610 450 310 0400 565 Ø515 / 16 x M24 28 18 26 200 400 400 670 500 340 0450 615 Ø565 / 20 x M24 28 18 26 200 400 400 720 550 370 0500 670 Ø620 / 20 x M24 28 18 26 250 500 500 790 600 400 0600 780 Ø725 / 20 x M27 28 23 30 250 500 500 900 700 450 0700 895 Ø840 / 24 x M27 30 23 30 250 500 500 1020 800 510 0800 1015 Ø950 / 24 x M30 32 23 33 250 500 500 1140 900 570 0900 1115 Ø1050 / 28 x M30 34 28 33 250 500 500 1250 1010 630 1000 1230 Ø1160 / 28 x M33 34 28 36 252 500 500 1360 1110 690
01.2005
FS F-piece FFS F-F-piece
MR Masonry pipe TS T-piece
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS FFR - PIECES Type: FFR
For flanging on, flange to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 69
DN1 øD TK / No. x thread S
ød1 L1 thick red.
0050 165 Ø125 / 4 x M16 18 10 18 100 0065 185 Ø145 / 4 x M16 18 15 18 100 0080 200 Ø160 / 8 x M16 20 15 18 105 0100 220 Ø180 / 8 x M16 20 15 18 115 0125 250 Ø210 / 8 x M16 22 15 18 140 0150 285 Ø240 / 8 x M20 22 15 22 155 0175 315 Ø270 / 8 x M20 24 15 22 160 0200 340 Ø295 / 8 x M20 26 15 22 165 0250 395 Ø350 / 12 x M20 26 15 22 210 0300 445 Ø400 / 12 x M20 26 18 22 210 0350 505 Ø460 / 16 x M20 26 18 22 300 0400 565 Ø515 / 16 x M24 28 18 26 400 0450 615 Ø565 / 20 x M24 28 18 26 400 0500 670 Ø620 / 20 x M24 28 18 26 400 0600 780 Ø725 / 20 x M27 28 23 30 400 0700 895 Ø840 / 24 x M27 30 23 30 400 0800 1015 Ø950 / 24 x M30 32 23 33 400 0900 1115 Ø1050 / 28 x M30 34 28 33 500 1000 1230 Ø1160 / 28 x M33 34 28 36 500
01.2005
L1
S
DN
1
Ød
1
ØD
DN
2
TK
/ N
o.
x th
rea
d
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS TT - PIECES Type: TTS
For flanging on, flange to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 70
DN øD TK / No. x thread S
ød1 L1 thick red.
0050 165 Ø125 / 4 x M16 18 10 18 300 0065 185 Ø145 / 4 x M16 18 15 18 310 0080 200 Ø160 / 8 x M16 20 15 18 330 0100 220 Ø180 / 8 x M16 20 15 18 360 0125 250 Ø210 / 8 x M16 22 15 18 400 0150 285 Ø240 / 8 x M20 22 15 22 440 0175 315 Ø270 / 8 x M20 24 15 22 490 0200 340 Ø295 / 8 x M20 26 15 22 520 0250 395 Ø350 / 12 x M20 26 15 22 700 0300 445 Ø400 / 12 x M20 26 18 22 800 0350 505 Ø460 / 16 x M20 26 18 22 850 0400 565 Ø515 / 16 x M24 28 18 26 900 0450 615 Ø565 / 20 x M24 28 18 26 950 0500 670 Ø620 / 20 x M24 28 18 26 1000 0600 780 Ø725 / 20 x M27 28 23 30 1100 0700 895 Ø840 / 24 x M27 30 23 30 1200 0800 1015 Ø950 / 24 x M30 32 23 33 1300 0900 1115 Ø1050 / 28 x M30 34 28 33 1400 1000 1230 Ø1160 / 28 x M33 34 28 36 1500
01.2005
L1
S
DN
Ød
1
ØD
L1
TK
/ N
o.
x th
rea
d
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
L1
S
DN
Ød
1
ØD
90°
ØD
Ød
1
DN
S
L2
45°
e
e
fr
TK
/ N
o.
x th
rea
d
TK
/ N
o.
x th
rea
d
ABS Q - PIECES Type: QS _
For flanging on, flange to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 71
DN øD TK. / No. x thread S
ød1 L1 L2 r e f thick red.
0050 165 Ø125 / 4 x M16 18 10 18 85 70 76 32 29 0065 185 Ø145 / 4 x M16 18 15 18 104 82 95 39 34 0080 200 Ø160 / 8 x M16 20 15 18 124 98 114 47 41 0100 220 Ø180 / 8 x M16 20 15 18 162 125 152 63 52 0125 250 Ø210 / 8 x M16 22 15 18 201 154 190 79 64 0150 285 Ø240 / 8 x M20 22 15 22 240 181 229 95 75 0175 315 Ø270 / 8 x M20 24 15 22 282 229 270 122 95 0200 340 Ø295 / 8 x M20 26 15 22 318 238 305 126 99 0250 395 Ø350 / 12 x M20 26 15 22 394 292 381 158 121 0300 445 Ø400 / 12 x M20 26 18 22 470 345 457 189 143 0350 505 Ø460 / 16 x M20 26 18 22 546 400 533 221 166 0400 565 Ø515 / 16 x M24 28 18 26 624 456 610 253 189 0450 615 Ø565 / 20 x M24 28 18 26 700 509 686 284 211 0500 670 Ø620 / 20 x M24 28 18 26 776 564 762 316 234 0600 780 Ø725 / 20 x M27 28 23 30 928 671 914 379 278 0700 895 Ø840 / 24 x M27 30 23 30 1082 781 1067 442 324 0800 1015 Ø950 / 24 x M30 32 23 33 1235 890 1219 505 369 0900 1115 Ø1050 / 28 x M30 34 28 33 1389 999 1372 568 414 1000 1230 Ø1160 / 28 x M33 34 28 36 1541 1107 1524 631 459
01.2005
90° elbows - Type: R
45° elbows - Type: H
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
ABS N - PIECES Type: NS
For flanging on, flange to EN 1092 PN10
Werster Heide 8 . 32549 Bad Oeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 72
DN øD TK / No. x thread S
ød1 L1 c øD thick red.
0050 165 Ø125 / 4 x M16 18 10 18 85 100 150 0065 185 Ø145 / 4 x M16 18 15 18 104 105 165 0080 200 Ø160 / 8 x M16 20 15 18 124 110 180 0100 220 Ø180 / 8 x M16 20 15 18 162 125 200 0125 250 Ø210 / 8 x M16 22 15 18 201 140 225 0150 285 Ø240 / 8 x M20 22 15 22 240 160 250 0175 315 Ø270 / 8 x M20 24 15 22 282 175 275 0200 340 Ø295 / 8 x M20 26 15 22 318 190 300 0250 395 Ø350 / 12 x M20 26 15 22 394 225 350 0300 445 Ø400 / 12 x M20 26 18 22 470 255 400 0350 505 Ø460 / 16 x M20 26 18 22 546 290 450 0400 565 Ø515 / 16 x M24 28 18 26 624 320 500 0450 615 Ø565 / 20 x M24 28 18 26 700 355 550 0500 670 Ø620 / 20 x M24 28 18 26 776 385 600 0600 780 Ø725 / 20 x M27 28 23 30 928 450 700 0700 895 Ø840 / 24 x M27 30 23 30 1082 510 800 0800 1015 Ø950 / 24 x M30 32 23 33 1235 570 900 0900 1115 Ø1050 / 28 x M30 34 28 33 1389 620 1000 1000 1230 Ø1160 / 28 x M33 34 28 36 1541 680 1100
01.2005
L1
S
DN
Ød
1
ØD
90°
c
Ød
L1
TK
/ N
o.
x th
rea
d
Subject to structural and technical changes, dimensions not guaranteed!
A B S – Armaturen GmbH Waste water system elements
International materials comparison
Material Germany American Unified Nurr Swedish Francaise British
Mat. No. DIN AISI UNS SS AFNOR BS 1.4005 X 12 CrS 13 416 S 41600 2380 Z 11 CF 13 416 S 21
1.4006 X 10 Cr 13 410 S 41000 2302 Z 10 C 13 410 S 21
1.4016 X 6 Cr 17 430 S 43000 2320 Z 8 C 17 430 S 15
1.4021 X 20 Cr 13 420 S 42000 2303 Z 20 C 13 420 S 37
1.4034 X 46 Cr 13 (2304) Z 40 C 14 (420 S 45)
1.4057 X 20 CrNi 17 2 431 S 43100 2321 Z15 CN 16.02 431 S 29
1.4104 X 12 CrMoS 17 430 F S 43020 2383 Z 13 CF 17 (441 S 28)
1.4112 X 90 CrMoV 18 440 B S 44003
1.4122 X 35 CrMo 17
1.4301 X 5 CrNi 18 10 304 S 30400 2332 Z 6 CN 18.08 304 S 15
1.4305 X 10 CrNiS 18 9 303 S 30300 2346 Z 8 CNF 18.09 303 S 31
1.4306 X 2 CrNi 19 11 304 L S 30403 2352 Z 2 CN 18.10 304 S 11
1.4310 X 12 CrNi 17 7 301 S 30100 2331 Z 12 CN 18.08 301 S 22
1.4401 X 5 CrNiMo 17 12 2 316 S 31600 2347 Z 7 CND 17.12.02 316 S 31
1.4404 X 2 CrNiMo 17 13 2 316 L S 31603 2348 Z 3 CND 18.12.02 316 S 11
1.4435 X 2 CrNiMo 18 14 3 316 L S 31603 2353 Z 3 CND 18.14.03 316 S 11
1.4436 X 5 CrNiMo 17 13 3 316 S 31600 2343 Z 7 CND 18.12.03 316 S 31
1.4438 X 2 CrNiMo 18 16 4 317 L S 31703 2367 Z 3 CND 19.15.04 317 S 12
1.4439 X 2 CrNiMoN 17 13 5 317 LNM
1.4448 X 5 CrNiMo 17 13 317 S 31700
1.4450 X 4 CrNiMoN 27 5 2 329 S 32900 2324 Z 5 CND 27.05 AZ
1.4462 X 2 CrNiMoN 22 5 3 S 31803 2377 (Z 5 CNDU 21.08)
1.4539 X 1NiCrMoCuN 25 20 5 N 08904 2562 Z 1 NCDU 25.20
1.4541 X 6 CrNiTi 18 10 321 S 32100 2337 Z 6 CNT 18.10 321 S 31
1.4550 X 6 CrNiNb 18 10 347 S 34700 2338 Z 6 CNNb 18.10 347 S 31
1.4571 X 6 CrNiMoTi 17 12 2 316 Ti S 31635 2350 Z 6 CNDT 17.12 320 S 31
1.4713 X 10 CrAl 7 Z 8 CA 7
1.4724 X 10 CrAl 13 (Z 10 C 13)
1.4742 X 10 CrAl 18 Z 10 CAS 18
1.4762 X 10 CrAl 24 (446) (S 44600) (2322) Z 10 CAS 24
1.4821 X 20 CrNiSi 25 4 Z 20 CNS 25.04
1.4828 X 15 CrNiSi 20 12 309 (S 30900) Z 15 CNS 20.12 309 S 24
1.4841 X 15 CrNiSi 25 20 314 S 31400 Z 12 CNS 25.20 314 S 25
1.4845 X 12 CrNi 25 21 310 S S 31008 2361 Z 12 CN 25.20 310 S 24
1.4864 X 12 NiCrSi 36 16 330 N 08330 Z 12 CNS 35.16 (3076 NA 17)
1.4876 X 10 NiCrAlTi 32 20 B 163 Z 8 NC 32.21 3076 NA 15 H
1.4878 X 12 CrNiTi 18 9 321 S 32100 2337 Z 6 CNT 18.12 321 S 51
2.4068 LC NI 88 B 160
2.4360 Ni Cu 30 Fe B 164 3076 NA 13
2.4375 Ni Cu 30 Al 3076 NA 18
2.4610 Ni Mo 16 Cr 16 Ti 3076 NA 45
2.4816 Ni Cr 15 Fe B 166 3076 NA 14
2.4856 Ni Cr 21 Mo 3076 NA 43
Werster Heide 8 . 32549 Bad theOeynhausen Tel. +49 5731 30051-0 . Fax +49 5731 3005110
Internet http.//www.ABS-Armaturen.net eMail [email protected] Page 73
01.2005 Subject to structural and technical changes, dimensions not guaranteed!
GENERAL TERMS OF DELIVERY AND PAYMENT 1. Validity of conditions 1.1 . Deliveries, services and quotations made by the seller take place exclusively on
the basis of these general terms and conditions. These therefore also apply to all future business contacts, even if they are not explicitly agreed again. These conditions are assumed to be accepted with acceptance of the goods or services at the latest. Counter-confirmations of the purchaser with reference to his general or sales terms and conditions are herewith opposed.
1.2 . Variations to these business contacts are only then applicable if the seller confirms them in writing.
2 . Quotations and conclusion of contract 2.1 . The seller's quotations are subject to change without notice and are therefore
non-binding. The seller reserves the right to make intermediate sales. Declarations of acceptance and all orders are required to be in writing (per fax if necessary) to be legally valid. The same applies to alterations, supplements and subsidiary agreements.
2.2 . Drawings, images, dimensions, weights and other performance data are only binding if these have been explicitly and specifically agreed in writing.
2.3 . The seller's sales employees are not authorised to make verbal subsidiary agreements or verbal assurances which exceed the contents of the written contract.
3 . Prices 3.1 . Unless otherwise stated, the seller will remain bound to the prices contained in his
quotation up to 30 days from its date of issue. The prices stated in the seller's confirmation of order are decisive in addition to the legally required value-added tax at the currently valid rate. Additional deliveries and services will be invoiced separately.
3.2 . Prices are ex-works exclusive of packaging, freight, insurance and the statutory value-added tax at the rate valid at the time of delivery.
3.3 . If the delivery takes place more than 6 months after conclusion of contract, the seller is entitled to pass on any material price and wage increases which have occurred to the purchaser.
4 . Period of delivery and performance 4.1 . Delivery deadlines or time limits which are binding or non-binding
must be made in writing. The delivery deadline only begins after receipt of all performances, information and technical information to be handed over by the purchaser. If subsequent revisions are made to the contract, the delivery deadlines will be extended reasonably in so far as the seller has not confirmed the original delivery deadline.
4.2 . Delivery and performance delays due to acts of God and due to events which considerably hinder the seller in making the delivery or make it impossible - this especially includes strikes, lockouts, official orders etc, even if these occur to the seller's suppliers or their subcontractors - are not the responsibility of the seller even in the case of bindingly agreed time limits and deadlines. They entitle the seller to extend the delivery or service by the period of delay in addition to a reasonable start-up period, or to completely or partly withdraw from the contract due to the parts not yet completed.
4.3 . If the delay takes longer than 3 months, the seller is entitled to withdraw from the contract with regard to the parts not yet completed after a reasonable period of notice. If the delivery time is extended, or if the seller is freed from his obligations, the purchaser is not entitled to base any claims for damages upon this. The seller may only use the circumstances stated above as a base for claims if he informs the seller of this fact immediately.
4.4 . Insofar as the seller is responsible for non-observance of bindingly agreed time limits and deadlines, or is delayed, the purchaser is entitled to compensation for delay to the sum of ½ % for each complete week of delay, but, however, to a total of maximum 5% of the invoiced sum for the services and deliveries affected by the delay. Any claims over and above this amount are excluded, unless the delay is due at least to gross negligence or intent on the part of the seller.
4.5 . The seller is entitled to provide partial services and partial deliveries at any time. 5 . Passage of risk The risk transfers to the purchaser as soon as the delivery is transferred to the
person carrying out transport, and has left the seller's warehouse for the purpose of shipment. If shipment becomes impossible through no fault of the seller, the risk transfers to the purchaser as soon as he is informed of readiness for shipment.
6 . Warranty 6.1 . The seller guarantees that the product is free of fabrication and material faults;
the warranty period is 12 months. 6.2 . The period of warranty commences with the date of delivery. If operation or
maintenance instructions provided by the seller are not followed, alterations are carried out to products, parts are replaced or expendables are used which do not comply with the original specification, the warranty becomes invalid.
6.3 . The purchaser must inform the seller's customer service department of any fault immediately, or at the latest within one week of receipt of delivery item, in writing. Any faults which have not been discovered despite careful investigations within this time limit must be notified in writing to the seller immediately after discovery.
6.4 . If the purchaser informs the seller that the products do not comply with the warranty, the following regulations apply. The purchaser is first exclusively entitled to claim for rectification. If rectification is not effective, the purchaser is then entitled to reduction of remuneration or to demand cancellation of the contract.
6.5 . Any liability for normal wear and tear is excluded. 6.6 . Warranty claims against the seller can only be made by the immediate purchaser
and cannot be passed on. 6.7 . The above paragraphs finally contain the warranty for products and deliveries and
services, and exclude any other warranty claims of any type unless such claims are based on intent or gross negligence on the part of the seller.
7 . Retention of ownership 7.1 . The seller is guaranteed the following securities up to fulfilment of all
requirements (including all account balances from current accounts) which the seller is entitled to for any legal reason against the purchaser at present or in the future. The purchaser is entitled to release of the securities listed below so far as their realisable value exceeds the demands by more than 20%.
7.2 . The goods remain the property of the seller. Processing or reconstruction always take place for the seller as manufacturer, without, however, obligations for him. If the seller's (joint) ownership ceases due to liaison, it is agreed at this point that (joint) ownership of the purchaser is transferred to the purchaser proportionally to value (invoiced value). The purchaser keeps the (joint) ownership of the seller free of charge. Goods on which the seller has claimed for (joint) ownership are hereafter referred to as conditional commodities.
7.3. The purchaser is entitled to process conditional commodities in normal business activities and to dispose of them as long as he is not then in delay. Pledging or security transfers are not permissible. The purchaser accepts the assignment. The seller authorises him on a revocable basis to collect the claims assigned to the seller on his account and in his own name. The authorisation to collect may only be revoked if the purchaser does not fulfil his payment obligations correctly.
7.4 . In the case of access to the conditional commodities by third parties, the purchaser shall indicate the property of the seller and inform him immediately. Costs of intervention are to be charged to the purchaser.
7.5 . In the case of breach of contract by the purchaser – in particular delay in payment – the seller is entitled to take back the conditional commodities or, if appropriate,
to demand the assignment of the purchaser's claims for return against third parties. The taking back as well as the seizure of the conditional commodities by the seller do not constitute a rescinding of the contract – providing the Hire Purchase Act is not applied here.
8. Payment 8.1 . Providing no other arrangements have been made, the seller's invoices are to be
settled in German Marks or Euros within 30 days following date of invoice without any deductions.
The seller is entitled, despite any conditions of the purchaser to the contrary, to set off any payments against older debts of the purchaser first of all and is to inform the purchaser about the type of set-offs undertaken. If costs and interest have already been incurred, then the seller is entitled to set off the payment against the costs first of all, then against interest and finally against the principal performance.
8.2 . A payment is not considered as having been made until the seller has the amount at his disposal. In the case of cheques, the payment shall not be considered as having been made until the cheque has been honoured without any reservations.
8.3 . If the purchaser should get into default, the seller is entitled to charge interest, calculated as from the time of getting into default, to the amount of the interest rate charged by commercial banks for open current account credits. They may be assessed at a lower rate if the purchaser proves a lower debit.
8.4 . If the seller becomes aware of circumstances which cast doubt upon the credit worthiness of the purchaser, in particular if cheques are not honoured or the purchaser ceases with his payments, the seller is entitled to accelerate maturity on the entire remaining debt, even if he has accepted cheques. Furthermore in this case, the seller is also entitled to ask for advance payments or provision of security.
8.5 . The purchaser is only entitled to offset, retention or reduction of the purchase price, even if complaints about defects or counter-claims have been enforced, if the counter-claims have become res judicata or are incontestable.
9 . Drawings and alterations to constructions The seller reserves all property rights and copyrights with regard to drawings, sketches
and other operational documents. These documents may only be copied, used or made available to third parties following the written agreement of the seller. The documents are to be returned on request. The seller assures that documents passed on by him are not encumbered with commercial protective rights of third parties and in so far releases the seller from possible demands from third parties.
The seller reserves the right to make alterations to constructions at any time, he is, however, not obliged to carry out such alterations on products which have already been supplied.
10 . Erection and assembly The erection and putting into operation of machines and appliances only takes place in
accordance with a special order. The afore-going as well as the following terms and conditions shall apply with regard to every kind of assembly, putting into operation or customer service work by the seller, providing no divergent written agreements have been made in the individual case in question.
10.1 . The purchaser is to take over and make available in good time: - Breakdown gangs, such as skilled workmen and assistants with the necessary tools in the numbers required - The necessary objects and materials, as well as scaffolding, cranes and elevators, ladders, welding appliances and all other necessary equipment required for assembly and putting into operation - Operational power in the required form including the necessary connections to the point of use, heating and general lighting - sufficiently large, suitable, dry and lockable rooms at the assembly site to keep the machine parts, equipment, material, tools etc. as well as reasonable working and heated recreation rooms for the assembly personnel, including reasonable sanitary facilities in accordance with the given circumstances - Protective clothing and protective equipment which are necessary for the assembly site as a consequence of special circumstances and are not usual for the purchaser in his branch of trade.
10.2 . If the erection, assembly or putting into operation is delayed by circumstances on the building site, without this being attributable to a fault of the seller, the purchaser then has to bear all costs for waiting time and necessary travel undertaken by the assembly personnel.
10.3 . The purchaser is obliged to accept the assembly as soon as it is complete and the work has been terminated. The acceptance procedure involves a check of the system. If the acceptance procedure is delayed without any fault being attributable to the purchaser's side, then acceptance shall be considered as having been made following completion and termination of the work. Following acceptance of the assembly work, the property risk is transferred to the purchaser.
10.4 . The seller is only liable for the correct handling and erection or assembly of the delivered object; no liability is taken over for the purchaser's auxiliary personnel in connection with the erection or assembly.
11 . Restriction of liability Claims for damages ensuing from impossibility of performance, positive violation of a
claim, culpa in contrahendo and tort are excluded against the seller as well as against his vicarious agents, unless there is a case of intent or gross negligence
12 . Compensation on account of non-fulfilment of the contract If the purchaser does not fulfil his obligations concerning acceptance of the delivery
and service of the seller or if he withdraws from the contract without due justification or gives unjust notice of termination, then the seller can claim compensation, incl. lost profit, from the purchaser.
The amount of the compensation is calculated as being 25 % of the order value of the of the delivery and services ordered by the purchaser. The amount of this abstractly calculated compensation is increased or decreased if the seller can prove damages to a higher extent or the purchaser to a lower extent.
13 . Applicable law, Place of jurisdiction, Partial invalidity 13.1 . The law of the Federal Republic of Germany shall apply with regard to these terms and
conditions of business as well as the entire legal relationship between the seller and purchaser.
13.2 . Providing the purchaser is a businessman within the meaning of the German Commercial Code, the exclusive place of jurisdiction for all disputes arising directly or indirectly from the contractual relationship shall be the jurisdiction of the Magistrates' Court / County Court Bad Oeynhausen/Bielefeld.
13.3 . If a provision in these terms and conditions of business or a provision within the scope of other agreements should be or become invalid, then the validity of all other provisions and agreements shall not be affected as a result. An invalid clause is to be replaced by a valid clause which corresponds to the implied intention and the economic meaning and purpose of the contract.