+54 11 4758-9567 | +54 11 4758-9231 | info@laboxdental.com | www.laboxdental.com

Av Matienzo e Itacumbú | El Palomar | Bs. As. | Argentina

Physical Properties - Propiedades Fisicas

Inve

stm

ents

HIGH-CAST

CROWNS AND BRIDGES

CHROME COBALT DENTURES

SPECIAL INVESTIMENT

CROMACAST

SILCA-VEST

CROMOVEST

CROMOVEST SF

PIN-CAST

Bonding Material

Type: Class ISO

15912:2006

Phosphate

Material

salmon

green

PLASTER

1:2

2 2 45 60 7 13 0,23 2500(18)

4600(32)-

24 60 4-6- 25-306 -7 - 2.0 - 1.2 700-900ºC high.cast

Phosphate2:1 13 30 13-1760 604 -5 35 1,2-1,2 900-1080ºC cromacastexpansor

expansor

A&BPolysil& Alc

2:1 14-18 - 760 608 -10 30-45 1,4 900-1050ºC

Polysil& Alc

2:1 18-20 - 760 608 -10 30-45 1,4 900-1050ºC A&B

A&BPolysil& Alc

2:1 18-20 - 760 608 -10 30-45 1,4 900-1050ºC

Gypsum1:1 30 30 560 606 -8 - 0,4 700-720ºC distilledwather

Consistency (ml.)

Mechanical Mixing (sec.)

ManualMixing (sec.)

Working Time (min.)

Model Ready (min.)

Ready for burnout (min.)

Expansion ( % / Setting - Themal)

Compressive stregth 2h. (Mpa)

Final Temperature

Mixing Liquid

green

Gyps

ums

Labox

Gypsums - Yesos

ISO 6873: TIPO IV DIE-ROCK

yellow

1102-0111102-351

1102-0131102-353

1102-0151102-354

ivory

Consistency: 20ml/100g; | Working Time: 9 min. | Setting Time: 12 min. | Expansion: 0.13% | Comp. Streight: 17.000 Psi

High strengh die stone.

1 Kg.25 Kg.

ADA: TIPO V

PouchBag

white

Yeso para troqueles de máxima compresión.

ISO 6873: TIPO IV RESIN-STONE

peach

1107-012 1107-011

ivory

Consistency: 20ml/100g; | Working Time: 7 min. | Setting Time: 10 min. | Expansion: 0.08% | Comp. Streight: 11.000 Psi

Resin fortified, low expansion die stone.

1 Kg.

ADA: TIPO IV

Pouch1107-352 1107-351 25 Kg.Bag

Yeso extra duro aditivado con resina. De baja expansión.

ISO 6873: TIPO IV MIX-ROCK

pink

1120-0111120-351

1120-0121120-352

1120-0131120-353

Consistency: 23ml / 100g | Working Time: 9 min. | Setting Time: 13 min. | Expansion: 0.09% | Comp. Streight: 13.000 Psi

Low-expansion die stone.

1 Kg.25 Kg.

ADA: TIPO IV

PouchBag

yellowwhite

Yeso para troqueles de baja expansión.

SPECIALITY STONE - YESOS PARA ESPECIALIDADES

DIE STONES - YESOS PARA MODELOS

ISO 6873: TIPO III MOUNTING-ROCK

1160-005

white

Consistency: 30ml/100g | Working Time: 1-2 min. | Setting Time: 3 min. | Expansion: 0.06% | Comp. Streight: 6.500 Psi

Gypsum for mounting to articulators. Low-expansion fast-setting stone.

500 g.Pouch1160-350 25 Kg.Bag

Yeso especial para impresión y montaje en articulador. Freguado rápìdo. Baja expansión.

ISO 6873: TIPO IV ADA: TIPO IV SCAN-ROCK

golden salmon

1112-0111112-012

Consistency: 20ml/100g; | Working Time: 9 min. | Setting Time: 12 min. | Expansion: 0.09% | Comp. Streight: 17.000 Psi

Elite Gypsum. Extra hard high density die stone. CAD-CAM compatible. Yeso Premium. De baja expansión y alta compresión. Compatible CAD-CAM.

Pouch 1 Kg.1112-3511112-352 Bag 25 Kg.

white

ISO 6873: TIPO IV FLOW-ROCK

deep bluedeep buff

1130-0111130-351

1130-0121130-352

1130-0131130-353

Consistency: 22-24ml/100g | Working Time: 6-9 min. | Setting Time: 11 min. | Expansion: 0.08% | Comp. Streight: 12.000 Psi

Fluid, low-expansion base stone.

1 Kg.Pouch25 Kg.Bag

Yeso fluido autonivelante especial para zócalos.

PULICROM

7880-010

Líquido electrolítico para el pulido de estructuras de Cr. Co.

Liquid for electrolytic polishing of Cr.Co.

1l.

POLI-GEL

Gel para pulir metales preciosos y resinas.Polishing paste for resins.

150 g.7881-150

ALUMINUM OXIDE

Óxido de aluminio para arenado.

Special corundum grit comprising 99,6% aluminum oxide.

1 k.Pouch

RUBBER WHEELS

7710-100 size: 24 x 6,3 mm.box x 100 u.

Goma rueda negra para pulir Cromo Cobalto y metales duros.Black rubber for finishing and polishing Cr. Co. metals.

PUMICE

7882-010 1 k.Piedra pómez en polvo.Pumice powder.

RUBBER CYLINDERS

Goma punta negra para pulir Cromo Cobalto y metales duros.7710-101 box x 100 u. size: 22 x 3,1 mm.

Black rubber for finishing and polishing Cr. Co. metals.

ACRYLIC POLISHERS

7720-250 25u.

Goma de silicona para el pulido de Acrílico.Silicone polishers for acrylic materials.

Casting Alloy - Aleaciones para colado

LABOX Co. Cr. ISO: 22674: TIPO V

4010-100

Aleación de cromo cobalto para prótesis esquelética.Cr. Co. frame work casting alloy.

1 k.

SURFACE FINISHING - ACABADO DE LA SUPERFICIE

PHYSICAL AND MECHANICAL FEATURES:Solidus-Liquidus temperature: 1340-1400ºCDensity: 8,3 g/cm3.Vickers hardness: 390 Hv10.Elongation at fracture: 6,2 %Yield load strenght (Rp0.2): 609 Mpa.Modulus of elasticity: 200 Gpa.

Composition: Cobalto (Co): 62% Cromo (Cr): 31% Molibdeno (Mo): 5% Others: C, Fe, Si, Mn.

ISO 6873: TIPO III ORTHO-GIPS

1150-010

snow white

Consistency: 28ml/100g | Working Time: 6 min. | Setting Time: 10 min. | Expansion: 0.09% | Comp. Streight: 8.500 Psi

Yeso de baja expansión especial para modelos de ortodoncia. Special stone for study models and orthodontic.

1 Kg.

ADA: TIPO III

Pouch1150-350 25 Kg.Bag

ISO 6873: TIPO III ECO-GIPS

1170-0101170-350

1170-0111170-351

1141-0121141-352

1170-0121170-350

green blue yellow white

Consistency: 35ml/100g | Working Time: 5 min. | Setting Time: 12 min. | Expansion: 0.18% | Comp. Streight: 8.000 Psi

Yeso piedra para modelos y antagonistas.Hard stone for models and antagonist.

1 Kg.Pouch25 Kg.Bag

ISO 6873: TIPO II PLASTER

1171-010

white yellow

Consistency: 45 ml / 100g | Working Time: 7 min. | Setting Time: 13 min. | Expansion: 0.23% | Comp. Streight: 4.600 Psi

Yeso taller para laboratorio.Plaster for laboratory.

1 Kg.Pouch1171-010

1171-0111171-351 25 Kg.Bag

ISO 6873: TIPO II LABOR-PLASTER

1182-010

white

Consistency: 50ml / 100g | Working Time: 7 min. | Setting Time: 13 min. | Expansion: 0.29% | Comp. Streight: 3.300 Psi

Yeso Taller Para Laboratorio.De fácil recortado.Plaster for laboratory. Easy to cut.

1 Kg.Pouch1182-350 25 Kg.Bag

ISO 6873: TIPO II ORTHO-PLASTER

1151-010

snow white

Consistency: 37-38ml / 100g | Working Time: 9 min. | Setting Time: 13 min. | Expansion: 0.20% | Comp. Streight: 6.500 Psi

Yeso para modelos de ortodoncia. De facil recortado.Plaster for models in orthodontics, easy to cut.

1 Kg.Pouch1151-350 25 Kg.Bag

MODEL STONES - YESOS PARA MODELOS

PLASTERS - YESOS LIGEROS

ISO 6873: TIPO III DUR-GIPS

yellow

1140-0111140-351

blue

1140-0101140-350

Consistency: 28-30ml/100g | Working Time: 5 min. | Setting Time: 12 min. | Expansion: 0.16% | Comp. Streight: 8.500 Psi

Hard stone for models antagonist and flexible denture.

1 Kg.25 Kg.

1140-0121140-352

pink

PouchBag

Yeso tipo III para modelos antagonistas y prótesis flexibles.

ISO 6873: TIPO II MUFLA-STONE

1184-010

white

Consistency: 35-40ml / 100g | Working Time: 3-4 min. | Setting Time: 8 min. | Expansion: 0.30% | Comp. Streight: 3.500 Psi

Yeso líquido para el enmuflado de Acrílico. Sin necesidad de vibración.Special flow plaster to muffle pouring without vibration.

1 Kg.Pouch1184-200 20 Kg.Bag

Gypsums - Yesos

LABOWAX-PALADAR

8548-100

Paladares de cera preformados.Palatine wax preformed.

Pink 10 u.

CROWNS AND BRIDGES - CORONAS Y PUENTES

LABOWAX - CASTING WAX

8504-7018504-7018504-703

Cera para colado en la técnica de coronas y puentes.Casting wax for crowns and bridges technique.

StickStickStick

RedBlueGreen

150 g.150 g.150 g.

8501-1318501-1328501-133

TabletTablet Tablet

RedBlueGreen

113 g.113 g.113 g.

8504-7018504-7028504-703

RedBlueGreen

CanCanCan

70 g.70 g.70 u.

LABOWAX-DIPPING WAX

8582-500

Cera de inmersión elástica. En escamas.Dipping wax, elastic.

Orange 100 g.

LABOWAX-OPACA

8503-7018503-7028503-7038503-704

Cera para esculpir. OpacaSculpturing wax. Opaque.

MintLight BlueIvoryGray

70 g.70 g.70 g.70 g.

LABOWAX-STICKY

8548-075

Cera adhesiva para reparaciones.Sticky wax for fixing.

Stick 35 u.70g.

PLASTIC SPRUES

GreenBlue

HardSoft

1000 u.1000 u.

LABOWAX-WAX WIRE

Hilo de cera en carrete para la confección de bebederos.Wax wire round on spools, for sprues.

2.5 - 3.0 - 3.5 - 4.0 - 5.0 mmGreen 250 g.

CR. CO.

8525-150

Cera para modelado en revestimiento. Wax for blocking out.

blue 500 g.8525-152 green 500 g.

RETENTIONS

8560-1508561-1508564-250

Cera para retenciones. En TirasWax performed retentions.

RoundOval Alternating

25 u.25 u.25 u.

CLASPS

8590-1008590-1108590-200

Ganchos preformados de cera.Wax preform clasps.

PremolarsMolars Bonyhard clasps

10 x 20 u.10 x 20 u.10 x 20 u.

STIPPLED CASTING WAX

8530-5008531-5008533-500

Cera grabada en planchas.Calibrated stippled wax.

FineCoarseExtra Coarse

15 u.15 u.15 u.

0,5 mm.0,5 mm.0,5 mm.

SMOOTH CASTING WAX

8510-500

Cera lisa calibrada en planchas. Calibrated smooth WAX.

0.5mm.smooth 15 u.

WAX PROFILES LINGUAL BARS CONTINUOS CLASPS BEADING WIRE

4.3 x 2.0 mm1,5x 1,0 mm 1.0 mm

FRAME WORK TECHNIQUE - TÉCNICA ESQUELÉTICA

MESH

8540-0018540-002

Cera para retención. Rejillas. Mesh wax of retentions.

SquareRound

20 u.20 u.

ACRYLIC WORK - TÉCNICA ACRÍLICA SPRUES - BEBEDEROS

Waxes - LABOWAX

LABOWAX

ISO 15912: 2006HIGH-CASTBonding Material: Phosphate Consistency: 24 ml. Working Time: 6-7 min. Ready for Burnout: 25-30 min. Final Temperature: 700-900ºC Mixing Liquid: High-cast expansor.

Revestimiento fosfático universal para todo tipo de aleaciones. Calentamiento convencional o rápido.

Universal investment for all alloys and pressable ceramics. Normal or rapid burnout technique (speed)

Mixing liquid6636-200 box 2 x 1Kg.6636-050

2 Kg.500 ml.

CHROME COBALT DENTURES - TÉCNICA ESQUELÉTICA.

PIN-CAST

6660-100

Revestimiento para colado de pernos.Investment for pins casting.

Bag1 Kg.

6660-100Pouch

25 Kg.

ISO 15912: 2006Bonding Material: Gypsum Consistency: 30 ml. Working Time: 6-8 min. Ready for Burnout: 60 min. Final Temperature: 700-720ºC Mixing Liquid: Distilled Wather.

SPECIAL INVESTMENT - REVESTIMIENTOS PARA PERNOS

CROMACAST

6622-2006622-100

Revestimiento a base de fosfatos para colados en CR.CO.Phosphate - based precision investment for CR.CO. casting.

20 Kg.1 L.

box 50 Pouch x 400g.Mixing liquid

ISO 15912: 2006Bonding Material: Phosphate Consistency: 13 ml. Working Time: 4-5 min. Ready for Burnout: 60 min. Final Temperature: 900-1080ºC Mixing Liquid: Cromacast expansion.

Investments - Revestimientos

CROWNS AND BRIDGES - CORONAS Y PUENTES

CROMOVEST

6632-0506632-1006632-250

Revestimiento a base de polisilicatos de alcohol para colados en CR.COPolisilicate alcohol based investment for CR.CO. casting.

bag + mixing liquidbag + mixing liquidbag + mixing liquid

5 Kg.10 Kg.25Kg.

ISO 15912: 2006Bonding Material: Polysil & ALC Consistency: 18-20 ml. Working Time: 8-10 min. Ready for Burnout: 60 min. Final Temperature: 900-1050ºC Mixing Liquid: A&B.

SILCA-VEST

6630-1006630-200

Revestimiento a base de polisilicatos y alcohol para colados en CR.COPolisilicate alcohol based investment for CR.CO. casting.

bag + mixing liquidbag + mixing liquid

10 Kg.20 Kg.

ISO 15912: 2006Bonding Material: Polysil & Alc Consistency: 14-18 ml. Working Time: 8-10 min. Ready for Burnout: 60 min. Final Temperature: 900-1050ºC Mixing Liquid: A&B.

TENSION REDUCER

3270-1253270-2503270-060

Reductor de tensión para patrones de cera.Surface tension-reducing agent for wax patterns.

SprayRefill Spray

60 ml125 ml250 ml

OKKLU-SPRAY

3245-5013245-502

Spray de oclusión para la visualización de puntos de contacto.Spray for making contact point visible.

GreenRed

50 g.50 g.

LAC-SPACER

3221-2513221-252

Laca espaciadora para muñones. Superficie lisa, resistente a los rasguños.

Lacquer for stumps. Smooth, scratch resistant surface.

Thickness: 5 µmThickness: 10 µm

25 ml.25 ml.

3221-2533221-2543220-250

Thickness: 13 µmThickness: 15 µm

BlueRed SilverGold Thinner for die spacer 25 ml.

25 ml.25 ml.

BAÑOMOL

8010-0108010-050

Líquido endurecedor de modelos.Hardener for duplicated models.

1 L.5 L.

REMO-GIPS

1191-100

Removedor de yeso y alginato.

Removing liquid for stone and alginate. Fast reaction 4hs.

1000 ml.

CERA-FILM

3205-0153205-050

Separador de Yeso-Cera. Separating fluid gypsum-wax.

PaintBrushRefill

15 ml.50 ml.

LABOXGEL

Gelatina de duplicado a base de AGAR-AGAR.

Duplicating material. Based on AGAR-AGAR reversible.

5510-0115510-010

1 Kg.5 Kg.

LABOX-SIL

Silicona para laboratorio. Policondensacion.Silicone for laboratory policondensation.

5020-200 2 Kg.+40 g.Shore 80

Complements - Complementos

Líquido separador para resinas acrílicas.Separating fluid for acrylic resins.LABO-FILM

1000 ml.3201-100

ISO 15912: 2006HIGH-CASTBonding Material: Phosphate Consistency: 24 ml. Working Time: 6-7 min. Ready for Burnout: 25-30 min. Final Temperature: 700-900ºC Mixing Liquid: High-cast expansor.

Revestimiento fosfático universal para todo tipo de aleaciones. Calentamiento convencional o rápido.

Universal investment for all alloys and pressable ceramics. Normal or rapid burnout technique (speed)

Mixing liquid6636-200 box 2 x 1Kg.6636-050

2 Kg.500 ml.

CHROME COBALT DENTURES - TÉCNICA ESQUELÉTICA.

PIN-CAST

6660-100

Revestimiento para colado de pernos.Investment for pins casting.

Bag1 Kg.

6660-100Pouch

25 Kg.

ISO 15912: 2006Bonding Material: Gypsum Consistency: 30 ml. Working Time: 6-8 min. Ready for Burnout: 60 min. Final Temperature: 700-720ºC Mixing Liquid: Distilled Wather.

SPECIAL INVESTMENT - REVESTIMIENTOS PARA PERNOS

CROMACAST

6622-2006622-100

Revestimiento a base de fosfatos para colados en CR.CO.Phosphate - based precision investment for CR.CO. casting.

20 Kg.1 L.

box 50 Pouch x 400g.Mixing liquid

ISO 15912: 2006Bonding Material: Phosphate Consistency: 13 ml. Working Time: 4-5 min. Ready for Burnout: 60 min. Final Temperature: 900-1080ºC Mixing Liquid: Cromacast expansion.

Investments - Revestimientos

CROWNS AND BRIDGES - CORONAS Y PUENTES

CROMOVEST

6632-0506632-1006632-250

Revestimiento a base de polisilicatos de alcohol para colados en CR.COPolisilicate alcohol based investment for CR.CO. casting.

bag + mixing liquidbag + mixing liquidbag + mixing liquid

5 Kg.10 Kg.25Kg.

ISO 15912: 2006Bonding Material: Polysil & ALC Consistency: 18-20 ml. Working Time: 8-10 min. Ready for Burnout: 60 min. Final Temperature: 900-1050ºC Mixing Liquid: A&B.

SILCA-VEST

6630-1006630-200

Revestimiento a base de polisilicatos y alcohol para colados en CR.COPolisilicate alcohol based investment for CR.CO. casting.

bag + mixing liquidbag + mixing liquid

10 Kg.20 Kg.

ISO 15912: 2006Bonding Material: Polysil & Alc Consistency: 14-18 ml. Working Time: 8-10 min. Ready for Burnout: 60 min. Final Temperature: 900-1050ºC Mixing Liquid: A&B.

TENSION REDUCER

3270-1253270-2503270-060

Reductor de tensión para patrones de cera.Surface tension-reducing agent for wax patterns.

SprayRefill Spray

60 ml125 ml250 ml

OKKLU-SPRAY

3245-5013245-502

Spray de oclusión para la visualización de puntos de contacto.Spray for making contact point visible.

GreenRed

50 g.50 g.

LAC-SPACER

3221-2513221-252

Laca espaciadora para muñones. Superficie lisa, resistente a los rasguños.

Lacquer for stumps. Smooth, scratch resistant surface.

Thickness: 5 µmThickness: 10 µm

25 ml.25 ml.

3221-2533221-2543220-250

Thickness: 13 µmThickness: 15 µm

BlueRed SilverGold Thinner for die spacer 25 ml.

25 ml.25 ml.

BAÑOMOL

8010-0108010-050

Líquido endurecedor de modelos.Hardener for duplicated models.

1 L.5 L.

REMO-GIPS

1191-100

Removedor de yeso y alginato.

Removing liquid for stone and alginate. Fast reaction 4hs.

1000 ml.

CERA-FILM

3205-0153205-050

Separador de Yeso-Cera. Separating fluid gypsum-wax.

PaintBrushRefill

15 ml.50 ml.

LABOXGEL

Gelatina de duplicado a base de AGAR-AGAR.

Duplicating material. Based on AGAR-AGAR reversible.

5510-0115510-010

1 Kg.5 Kg.

LABOX-SIL

Silicona para laboratorio. Policondensacion.Silicone for laboratory policondensation.

5020-200 2 Kg.+40 g.Shore 80

Complements - Complementos

Líquido separador para resinas acrílicas.Separating fluid for acrylic resins.LABO-FILM

1000 ml.3201-100

ISO 6873: TIPO III ORTHO-GIPS

1150-010

snow white

Consistency: 28ml/100g | Working Time: 6 min. | Setting Time: 10 min. | Expansion: 0.09% | Comp. Streight: 8.500 Psi

Yeso de baja expansión especial para modelos de ortodoncia. Special stone for study models and orthodontic.

1 Kg.

ADA: TIPO III

Pouch1150-350 25 Kg.Bag

ISO 6873: TIPO III ECO-GIPS

1170-0101170-350

1170-0111170-351

1141-0121141-352

1170-0121170-350

green blue yellow white

Consistency: 35ml/100g | Working Time: 5 min. | Setting Time: 12 min. | Expansion: 0.18% | Comp. Streight: 8.000 Psi

Yeso piedra para modelos y antagonistas.Hard stone for models and antagonist.

1 Kg.Pouch25 Kg.Bag

ISO 6873: TIPO II PLASTER

1171-010

white yellow

Consistency: 45 ml / 100g | Working Time: 7 min. | Setting Time: 13 min. | Expansion: 0.23% | Comp. Streight: 4.600 Psi

Yeso taller para laboratorio.Plaster for laboratory.

1 Kg.Pouch1171-010

1171-0111171-351 25 Kg.Bag

ISO 6873: TIPO II LABOR-PLASTER

1182-010

white

Consistency: 50ml / 100g | Working Time: 7 min. | Setting Time: 13 min. | Expansion: 0.29% | Comp. Streight: 3.300 Psi

Yeso Taller Para Laboratorio.De fácil recortado.Plaster for laboratory. Easy to cut.

1 Kg.Pouch1182-350 25 Kg.Bag

ISO 6873: TIPO II ORTHO-PLASTER

1151-010

snow white

Consistency: 37-38ml / 100g | Working Time: 9 min. | Setting Time: 13 min. | Expansion: 0.20% | Comp. Streight: 6.500 Psi

Yeso para modelos de ortodoncia. De facil recortado.Plaster for models in orthodontics, easy to cut.

1 Kg.Pouch1151-350 25 Kg.Bag

MODEL STONES - YESOS PARA MODELOS

PLASTERS - YESOS LIGEROS

ISO 6873: TIPO III DUR-GIPS

yellow

1140-0111140-351

blue

1140-0101140-350

Consistency: 28-30ml/100g | Working Time: 5 min. | Setting Time: 12 min. | Expansion: 0.16% | Comp. Streight: 8.500 Psi

Hard stone for models antagonist and flexible denture.

1 Kg.25 Kg.

1140-0121140-352

pink

PouchBag

Yeso tipo III para modelos antagonistas y prótesis flexibles.

ISO 6873: TIPO II MUFLA-STONE

1184-010

white

Consistency: 35-40ml / 100g | Working Time: 3-4 min. | Setting Time: 8 min. | Expansion: 0.30% | Comp. Streight: 3.500 Psi

Yeso líquido para el enmuflado de Acrílico. Sin necesidad de vibración.Special flow plaster to muffle pouring without vibration.

1 Kg.Pouch1184-200 20 Kg.Bag

Gypsums - Yesos

LABOWAX-PALADAR

8548-100

Paladares de cera preformados.Palatine wax preformed.

Pink 10 u.

CROWNS AND BRIDGES - CORONAS Y PUENTES

LABOWAX - CASTING WAX

8504-7018504-7018504-703

Cera para colado en la técnica de coronas y puentes.Casting wax for crowns and bridges technique.

StickStickStick

RedBlueGreen

150 g.150 g.150 g.

8501-1318501-1328501-133

TabletTablet Tablet

RedBlueGreen

113 g.113 g.113 g.

8504-7018504-7028504-703

RedBlueGreen

CanCanCan

70 g.70 g.70 u.

LABOWAX-DIPPING WAX

8582-500

Cera de inmersión elástica. En escamas.Dipping wax, elastic.

Orange 100 g.

LABOWAX-OPACA

8503-7018503-7028503-7038503-704

Cera para esculpir. OpacaSculpturing wax. Opaque.

MintLight BlueIvoryGray

70 g.70 g.70 g.70 g.

LABOWAX-STICKY

8548-075

Cera adhesiva para reparaciones.Sticky wax for fixing.

Stick 35 u.70g.

PLASTIC SPRUES

GreenBlue

HardSoft

1000 u.1000 u.

LABOWAX-WAX WIRE

Hilo de cera en carrete para la confección de bebederos.Wax wire round on spools, for sprues.

2.5 - 3.0 - 3.5 - 4.0 - 5.0 mmGreen 250 g.

CR. CO.

8525-150

Cera para modelado en revestimiento. Wax for blocking out.

blue 500 g.8525-152 green 500 g.

RETENTIONS

8560-1508561-1508564-250

Cera para retenciones. En TirasWax performed retentions.

RoundOval Alternating

25 u.25 u.25 u.

CLASPS

8590-1008590-1108590-200

Ganchos preformados de cera.Wax preform clasps.

PremolarsMolars Bonyhard clasps

10 x 20 u.10 x 20 u.10 x 20 u.

STIPPLED CASTING WAX

8530-5008531-5008533-500

Cera grabada en planchas.Calibrated stippled wax.

FineCoarseExtra Coarse

15 u.15 u.15 u.

0,5 mm.0,5 mm.0,5 mm.

SMOOTH CASTING WAX

8510-500

Cera lisa calibrada en planchas. Calibrated smooth WAX.

0.5mm.smooth 15 u.

WAX PROFILES LINGUAL BARS CONTINUOS CLASPS BEADING WIRE

4.3 x 2.0 mm1,5x 1,0 mm 1.0 mm

FRAME WORK TECHNIQUE - TÉCNICA ESQUELÉTICA

MESH

8540-0018540-002

Cera para retención. Rejillas. Mesh wax of retentions.

SquareRound

20 u.20 u.

ACRYLIC WORK - TÉCNICA ACRÍLICA SPRUES - BEBEDEROS

Waxes - LABOWAX

LABOWAX

Gypsums - Yesos

ISO 6873: TIPO IV DIE-ROCK

yellow

1102-0111102-351

1102-0131102-353

1102-0151102-354

ivory

Consistency: 20ml/100g; | Working Time: 9 min. | Setting Time: 12 min. | Expansion: 0.13% | Comp. Streight: 17.000 Psi

High strengh die stone.

1 Kg.25 Kg.

ADA: TIPO V

PouchBag

white

Yeso para troqueles de máxima compresión.

ISO 6873: TIPO IV RESIN-STONE

peach

1107-012 1107-011

ivory

Consistency: 20ml/100g; | Working Time: 7 min. | Setting Time: 10 min. | Expansion: 0.08% | Comp. Streight: 11.000 Psi

Resin fortified, low expansion die stone.

1 Kg.

ADA: TIPO IV

Pouch1107-352 1107-351 25 Kg.Bag

Yeso extra duro aditivado con resina. De baja expansión.

ISO 6873: TIPO IV MIX-ROCK

pink

1120-0111120-351

1120-0121120-352

1120-0131120-353

Consistency: 23ml / 100g | Working Time: 9 min. | Setting Time: 13 min. | Expansion: 0.09% | Comp. Streight: 13.000 Psi

Low-expansion die stone.

1 Kg.25 Kg.

ADA: TIPO IV

PouchBag

yellowwhite

Yeso para troqueles de baja expansión.

SPECIALITY STONE - YESOS PARA ESPECIALIDADES

DIE STONES - YESOS PARA MODELOS

ISO 6873: TIPO III MOUNTING-ROCK

1160-005

white

Consistency: 30ml/100g | Working Time: 1-2 min. | Setting Time: 3 min. | Expansion: 0.06% | Comp. Streight: 6.500 Psi

Gypsum for mounting to articulators. Low-expansion fast-setting stone.

500 g.Pouch1160-350 25 Kg.Bag

Yeso especial para impresión y montaje en articulador. Freguado rápìdo. Baja expansión.

ISO 6873: TIPO IV ADA: TIPO IV SCAN-ROCK

golden salmon

1112-0111112-012

Consistency: 20ml/100g; | Working Time: 9 min. | Setting Time: 12 min. | Expansion: 0.09% | Comp. Streight: 17.000 Psi

Elite Gypsum. Extra hard high density die stone. CAD-CAM compatible. Yeso Premium. De baja expansión y alta compresión. Compatible CAD-CAM.

Pouch 1 Kg.1112-3511112-352 Bag 25 Kg.

white

ISO 6873: TIPO IV FLOW-ROCK

deep bluedeep buff

1130-0111130-351

1130-0121130-352

1130-0131130-353

Consistency: 22-24ml/100g | Working Time: 6-9 min. | Setting Time: 11 min. | Expansion: 0.08% | Comp. Streight: 12.000 Psi

Fluid, low-expansion base stone.

1 Kg.Pouch25 Kg.Bag

Yeso fluido autonivelante especial para zócalos.

PULICROM

7880-010

Líquido electrolítico para el pulido de estructuras de Cr. Co.

Liquid for electrolytic polishing of Cr.Co.

1l.

POLI-GEL

Gel para pulir metales preciosos y resinas.Polishing paste for resins.

150 g.7881-150

ALUMINUM OXIDE

Óxido de aluminio para arenado.

Special corundum grit comprising 99,6% aluminum oxide.

1 k.Pouch

RUBBER WHEELS

7710-100 size: 24 x 6,3 mm.box x 100 u.

Goma rueda negra para pulir Cromo Cobalto y metales duros.Black rubber for finishing and polishing Cr. Co. metals.

PUMICE

7882-010 1 k.Piedra pómez en polvo.Pumice powder.

RUBBER CYLINDERS

Goma punta negra para pulir Cromo Cobalto y metales duros.7710-101 box x 100 u. size: 22 x 3,1 mm.

Black rubber for finishing and polishing Cr. Co. metals.

ACRYLIC POLISHERS

7720-250 25u.

Goma de silicona para el pulido de Acrílico.Silicone polishers for acrylic materials.

Casting Alloy - Aleaciones para colado

LABOX Co. Cr. ISO: 22674: TIPO V

4010-100

Aleación de cromo cobalto para prótesis esquelética.Cr. Co. frame work casting alloy.

1 k.

SURFACE FINISHING - ACABADO DE LA SUPERFICIE

PHYSICAL AND MECHANICAL FEATURES:Solidus-Liquidus temperature: 1340-1400ºCDensity: 8,3 g/cm3.Vickers hardness: 390 Hv10.Elongation at fracture: 6,2 %Yield load strenght (Rp0.2): 609 Mpa.Modulus of elasticity: 200 Gpa.

Composition: Cobalto (Co): 62% Cromo (Cr): 31% Molibdeno (Mo): 5% Others: C, Fe, Si, Mn.

+54 11 4758-9567 | +54 11 4758-9231 | info@laboxdental.com | www.laboxdental.com

Av Matienzo e Itacumbú | El Palomar | Bs. As. | Argentina

Physical Properties - Propiedades FisicasIn

vest

men

ts

HIGH-CAST

CROWNS AND BRIDGES

CHROME COBALT DENTURES

SPECIAL INVESTIMENT

CROMACAST

SILCA-VEST

CROMOVEST

CROMOVEST SF

PIN-CAST

Bonding Material

Type: Class ISO

15912:2006

Phosphate

Material

salmon

green

PLASTER

1:2

2 2 45 60 7 13 0,23 2500(18)

4600(32)-

24 60 4-6- 25-306 -7 - 2.0 - 1.2 700-900ºC high.cast

Phosphate2:1 13 30 13-1760 604 -5 35 1,2-1,2 900-1080ºC cromacastexpansor

expansor

A&BPolysil& Alc

2:1 14-18 - 760 608 -10 30-45 1,4 900-1050ºC

Polysil& Alc

2:1 18-20 - 760 608 -10 30-45 1,4 900-1050ºC A&B

A&BPolysil& Alc

2:1 18-20 - 760 608 -10 30-45 1,4 900-1050ºC

Gypsum1:1 30 30 560 606 -8 - 0,4 700-720ºC distilledwather

Consistency (ml.)

Mechanical Mixing (sec.)

ManualMixing (sec.)

Working Time (min.)

Model Ready (min.)

Ready for burnout (min.)

Expansion ( % / Setting - Themal)

Compressive stregth 2h. (Mpa)

Final Temperature

Mixing Liquid

green

Gyps

ums

Labox