Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
When Inspection Needs Perfection
A1
Catalogo A1 - 2016_Layout 1 25/03/16 16:31 Pagina 1
A1 concept merges the human into the automatic visual inspection, combining the advantages ofmotion and optics flexibility with the stability of inspection results.
This allows the creation of a “humanlike” equipment with the possibility to vary the framing and totake advantage of the lighting sources that affect the image.
Thanks to a wide set of software tools, including a brand new off-line setup mode to allow the pa-rameters optimization phase completely off-line, the robot is a powerful system very easy to setupand validate.
With its numerous applications, A1 represents the first automatic machine for the inspection ofliquid, freeze-dried and powder products with extremely reduced format change parts.
conc
ept:
over
-prin
t.it
Rev
. 2 ·
03/2
016
A1
Inspected containers: Vials, Ampoules, Cartridges, Syringes, Special Containers
Products to be inspected Waterlike, Suspensions, Oily, Freeze-dried
Container size: Diameter: from 8mm to 95mmHeight: 240 mm
Machine nominal speed: up to 50 pcs/min(3000 pcs/h)
Loading: By trays or in line
Unloading Accepted: By trays or in line
Unloading Rejected: By trays
To be defined according to specific configuration
Particles, fill level and cosmetic inspection
RPV Remote Parameterization & Validation
Manual loading
“Fail safe” reject verification system (Optional)
21 CFR part 11 compliance for electronic records (recipes, batches/sub-batches, audit trail)
Ethernet connection
User friendly interface
In-line connection to upstream and downstream equipments.
Leak Detection available for liquid products (High Voltage)
Leak Detection available for freeze-dried products (Headspace Gas Analyser)
Product colour (Spectrometer)
Product opacity (Opacimeter)
OCR/OCV
BREVETTI C.E.A. SpA
Via del Commercio, 28 - 36050 Sovizzo (VI) ItalyTel. +39 0444.551.988 - Fax +39 0444.536.241www.brevetti-cea.com - [email protected]
Specification subject to change without notice.All rights reserved. The copying of technical data and images is forbidden. © Copyright BREVETTI C.E.A. SpA The information given on this data sheet is accurate as for the date of issue. Nothing here in shall be
deemed to constitute a warranty, explicitly or implicitly. It is the user’s responsibility to determine theapplicability and suitability of such material to any particular purpose.
Catalogo A1 - 2016_Layout 1 25/03/16 16:31 Pagina 2