0211 BU-SB10376 Page 2 of 15 Data Sheet: 1160

Catalog Symbol: QSCP4Description:

Panelboards for commercial/industrial branch or service entrance applicationson systems up through 600Vac.

The QSCP is especially designed to address the NEC® Selective CoordinationRequirements for Emergency, Legally Required Standby, Healthcare EssentialElectrical and Critical Operation Power Systems (COPS) per NEC® 700.27,701.18, 517.26 and 708.54. Not for applications requiring AFCI protected circuits. The QSCP is configured to order for the application. To confirm avail-ability of options and constructions, contact your Cooper Bussmann distributor.Ratings:

Volts: 600Vac (or less), 125VdcAmps: 30, 60, 100, 200, 225, 400ASCCR: 20kA or 100kA @125Vdc - See Panelboard

Short-Circuit Current Ratings table for AC ratings

Agency Information:• UL 67 – Standard for panelboards• UL 50/UL 50E – Enclosures for electrical equipment• CSA 22.2, No. 29-M1989 – Panelboards and enclosed panelboards• UL Listed, Class CTL panelboard (meets 2002 NEC® 408.15 limit of

42 overcurrent devices per panel)• U.B.C. and C.B.C. Seismic Qualified, and I.B.C. Approved

Main Options:• Main Lug Only (MLO) • Fused main disconnect• Non-fused main disconnect

Branch Disconnect Options:• 1-, 2- and 3-Pole 15, 20, 30, 40, 50, 60, 70, 90 and 100A rejecting

branch disconnects (see table for details). Branch ampacity on125Vdc panels limited to CCPB 40A or less.

Branch Circuit Positions:• 18, 30 and 42

Neutral Options:• Unbonded & Bonded 200A and 400A

Ground Options:• Isolated & Non-isolated

Enclosures:• NEMA 1 & NEMA 3R. Other ratings available. Consult factory.

Spare Fuse Compartment• Six space spare fuse compartment standard on all models

CCPB Horsepower Ratings:

FFuussee MMaaxxCCPB* Part Amp CCPB Non-Indicating IndicatingNumber Poles Range Ampacity Fuses (standard) Fuses (opt’l)**CCPB-1-15CF 1 TCF1RN, TCF3RN, TCF6CCPB-2-15CF 2 1-15 15 TCF6RN, TCF10RN, TCF10,CCPB-3-15CF 3 TCF15RN TCF15CCPB-1-20CF 1 TCF17-1/2RN, TCF17-1/2,CCPB-2-20CF 2 171/2-20 20 TCF20RN TCF20CCPB-3-20CF 3CCPB-1-30CF 1 TCF25RN, TCF25,CCPB-2-30CF 2 25-30 30 TCF30RN TCF30CCPB-3-30CF 3CCPB-1-40CF 1 TCF35RN, TCF35,CCPB-2-40CF 2 35-40 40 TCF40RN TCF40CCPB-3-40CF 3CCPB-1-50CF 1 TCF45RN, TCF45,CCPB-2-50CF 2 45-50 50 TCF50RN TCF50CCPB-3-50CF 3CCPB-1-60CF 1CCPB-2-60CF 2 60 60 TCF60RN TCF60CCPB-3-60CF 3CCPB-1-70CF 1†CCPB-2-70CF 2† 70 70 TCF70RN TCF70CCPB-3-70CF 3†CCPB-1-90CF 1†

TCF80RN TCF80CCPB-2-90CF 2† 80-90 90

TCF90RN TCF90CCPB-3-90CF 3†CCPB-1-100CF 1†CCPB-2-100CF 2† 100 100 TCF100RN TCF100CCPB-3-100CF 3†

*CCPB disconnect can accept CUBEFuses with amp ratings less than or equal to the amp rating of the CCPB disconnect.

**Correct fit with CCPB disconnect requires indicating CUBEFuses with date code R38 or later.†Available for a bus rating of 225A or higher.

Panelboard Short-Circuit Current Ratings:

Amp Hp Rating @ VacCCPB Disconnect Rating 120 240 480 600CCPB-(Poles)-15CF 15 0.5 3 5 7.5CCPB-(Poles)-20CF 20 0.75 3 7.5 10CCPB-(Poles)-30CF 30 1.5 5 15 10CCPB-(Poles)-40CF 40 2 7.5 20 10CCPB-(Poles)-50CF 50 3 7.5 20 10CCPB-(Poles)-60CF 60 3 7.5 20 10CCPB-(Poles)-70CF† 70 3 15 30 40CCPB-(Poles)-90CF† 80 5 20 40 50CCPB-(Poles)-100CF† 100 5 20 50 50†Available for a bus rating of 225A or higher.

Branch Disconnects:

Panelboard Short-Circuit Current RatingsAC Main Options DC

Main 70-200A Main 225-400A Main CCP_CF MainLug Only Disc. No Fuses* Disc. No Fuses* Main Disc. Lug Only

SCCR (MLO)* or w/ Class J Fuses or w/ Class J Fuses (60A)** (MLO)*High 200kA 200kA 100kA 200kA 100kAStd. 50kA 50kA 50kA 50kA 20kA

* Class J, T or RK1 fuses upstream, max. amps = panel amps. ** CUBEFuse Disconnect.

0211 BU-SB10376 Page 3 of 15 Data Sheet: 1160

Enclosure Types

NEMA 1

• Flush or surface mount

• Galvanized steel with removableend walls - blank or with knockoutsto order

• Box sizes: 20” W x 5.75” D x 33”,50”, 59”or 69” H (510 W x 145 Dx 838, 1270, 1500 or 1753mm H).Box can be rotated 180° to accom-modate conduit feed

• Enclosure and chassis mountinginstructions are found in supplied literature

• Chassis mounts directly onto studsin the enclosure

• Trim finished with gray powder coatpaint over phosphatized steel (ANSI 61)

• Door and door-in-door configurations with locks

• Door locks use key #2A1910-2

• Circuit directory card is located onthe inside of the door

• Trim screws are concealed

AC & DC Voltages & System Types

Three-PhaseSingle-Phase

Busing

Tin-plated copper with sufficient cross section to meet UL 67 temperature riserequirements.

Distributed 1- & 3-Phase Busing

All CCPB branch disconnects can be mounted in any branch circuit position.

NEMA 3R

• Surface mount only

• Finished with gray powder coatpaint over phosphatized steel (ANSI 61)

• Bottom feed only, no knockouts

• Box sizes: 20” W x 7.7” D x 34.5”,51.5”, 60.5” or 70.5 H (510 W x195 D x 876, 1310, 1535 or1791mm H)

• Enclosure and chassis mountinginstructions are found in supplied literature

• Chassis mounts directly onto studsin the enclosure

• Gasketed door has vault handle withlock

• Door locks use key #2A1910-1

• Circuit directory card is located onthe inside of the door

1-Phase, 3 Wire• 120/240V 1-Phase, 3 Wire

1-Phase, 2 Wire• 120V 1-Phase, 2 Wire• 240V 1-Phase, 2 Wire

1-Phase, 2 Wire, Wye• 277V 1-Phase, 2 Wire

1-Phase, 2 Wire, Delta• 480V 1-Phase, 2 Wire

1-Phase, 3 Wire, Delta• 240/480V 1-Phase, 3 Wire

3-Phase, 4 Wire, Wye• 208Y/120V 3-Phase, 4 Wire• 480Y/277V 3-Phase, 4 Wire• 600Y/347V 3-Phase, 4 Wire

1-Phase, 3 Wire, Wye• 208Y/120V 1-Phase, 3 Wire• 480Y/277V 1-Phase, 3 Wire

3-Phase, 4 Wire, Delta• 240/120V 3-Phase, 4 Wire• 480/240V 3-Phase, 4 Wire

3-Phase, 3 Wire, Delta• 240V 3-Phase, 3 Wire• 480V 3-Phase, 3 Wire• 600V 3-Phase, 3 Wire• 240V 3-Phase, 3 Wire, Grounded B• 480V 3-Phase, 3 Wire, Grounded B• 600V 3-Phase, 3 Wire, Grounded B

A B

N

C

A

BC

AN

BC

AB

N

C

A

BNC

A

BC

B

N

C

A

DC Voltage1-Phase, 2 Wire

• 125Vdc, 2 Wire

(Up to 125Vdc, MLO optiononly, CCPB 40A or less)

AC Voltages

N +125Vdc

0211 BU-SB10376 Page 4 of 15 Data Sheet: 1160

Main Sub-Feed Mechanical LugsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))<_ 200 Amp Panels

• 300kcmil - 6AWG / 275 (31)Smaller lugs for <_ 60 amp panels not availableWWiirree RRaattiinngg:: 60/75°C, Cu-Al

Main Sub-Feed Mechanical LugsMain Barrier Cover OpenWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 600kcmil-2AWG/375(42)WWiirree RRaattiinngg:: 60/75°C, Cu-Al

Main Compression (Crimp) Lugs*WWiirree RRaannggee<_60 Amp Panels

• 8AWG-1/0>60 Amp Panels

• 300kcmil-4AWGWWiirree RRaattiinngg:: 60/75°C, Cu-Al

Main Compression (Crimp) Lugs*Main Barrier Cover OpenWWiirree RRaannggee• 600-250kcmilWWiirree RRaattiinngg:: 60/75°C, Cu-Al

Main Mechanical LugsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))<_ 60 Amp Panels

• 2-4AWG / 50 (5.6)• 6-10AWG / 40 (4.5)• 12-14AWG / 15 (1.7)

> 60 to 200 Amp Panels• 300kcmil-1AWG / 375 (42)• 2-6AWG / 275 (31)

WWiirree RRaattiinngg:: 60/75°C, Cu-Al

Mechanical LugsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))

• 300kcmil-1AWG / 375 (42)• 2-6AWG / 275 (31)

WWiirree RRaattiinngg:: 60/75°C, Cu-Al

Main Mechanical LugsMain Barrier Cover OpenWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 600kcmil-4AWG / 500 (56)WWiirree RRaattiinngg:: 60/75°C, Cu-Al

200 Amp Main Lugs225-400 Amp Main Lugs

225-400 Amp Loadside Fused Disconnect

Available on: • 18 and 30 branch position MLO• 18 branch position non-fused main disconnect

Feed-Through Lugs

Compression, mechanical and double (sub-feed) lugs are allavailable as feed-through lugs except if TVSS or loadside disconnect options are chosen. Lug ampacity ratings will bebased upon panelboard ampacity rating.

* Versa-Crimp® VC-6 crimp tool recommended for wire crimping.** Not available with TVSS option.

Fuse mounting torque: 40 Lb-In (4.5 N•m)

0211 BU-SB10376 Page 5 of 15 Data Sheet: 1160

Fused Main Disconnect, 1- & 3-PhaseNot available with DC ratingsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 300kcmil-4AWG / 200 (23)WWiirree RRaattiinngg:: 75°C, Cu Only

Single-Phase 60A

Three-Phase 60A

Non-Fused Main Disconnect, 1- & 3-PhaseNot available with DC ratingsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 300kcmil-4AWG / 200 (23)WWiirree RRaattiinngg:: 75°C, Cu Only

30-100A Fused Main Disconnects (CCP), 1- & 3-PhaseNot available with DC ratingsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 18-10AWG Single & Dual / 20 (2.2)• 8-6AWG Single & Dual / 35 (3.9)• 4AWG Single / 35 (3.9)WWiirree RRaattiinngg:: 75°C, Cu only

70-200 Amp Main Disconnects

30-100 Amp Main Disconnects

Fuse mounting torque: 40 Lb-In (4.5 N•m)

Non-Fused Main Disconnect, 1- & 3-PhaseNot available with DC ratingsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 600kcmil-2AWG / 375 (42)WWiirree RRaattiinngg:: 75°C, Cu Only

225-400 Amp Main Disconnects

Fused Main Disconnect, 1- & 3-PhaseNot available with DC ratingsWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• 600kcmil-2AWG / 375 (42)WWiirree RRaattiinngg:: 75°C, Cu Only

Fuse mounting torque: 40 Lb-In (4.5 N•m)

0211 BU-SB10376 Page 6 of 15 Data Sheet: 1160

200A UnbondedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• Main Terminal 300kcmil-1AWG / 375 (42)• Branch Connections - See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr MMaatteerriiaall:: Aluminum

200A BondedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• Main Terminal 300kcmil-1AWG / 375 (42)• Branch Connections - See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr MMaatteerriiaall:: Aluminum

IsolatedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr MMaatteerriiaall:: Aluminum

Non-isolatedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr MMaatteerriiaall:: Aluminum

400A BondedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• Main Terminal 600kcmil-4AWG / 500 (56)• Branch Connections - See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr aanndd LLuugg MMaatteerriiaall:: Aluminum

400A UnbondedWWiirree RRaannggee // TToorrqquuee LLbb--IInn ((NN••mm))• Main Terminal 600kcmil-4AWG / 500 (56)• Branch Connections - See table belowWWiirree RRaattiinngg:: 60/75°C, Cu-AlBBaarr aanndd LLuugg MMaatteerriiaall:: Aluminum

Neutral Assemblies Ground Assemblies

Neutral and Ground Assembly Installation

To facilitate installation and wiring, both neutral and ground assemblies can beinstalled on either side of the chassis with the desired orientation using thesupplied screws.

Assembly Torques

Torque to 25 Lb-In (2.8 N•m).

WWiirree** TToorrqquuee MMaaxx.. NNoo.. WWiirreess PPeerr OOppeenniinnggAAWWGG LLbb--IInn ((NN••mm)) NNeeuutt.. GGNNDD

SSmmaallll OOppeenniinngg14 25-35 (2.8-3.9) 2 212 25-35 (2.8-3.9) 2 210 25-35 (2.8-3.9) 2 28 30-40 (3.4-4.5) 1 1

6-4 35-40 (3.9-4.5) 1 1LLaarrggee OOppeenniinngg

14 25-35 (2.8-3.9) 3 312 25-35 (2.8-3.9) 3 310 35 (3.9) 3 38 30-40 (3.4-4.5) 1 1

6-4 35-40 (3.9-4.5) 1 13-1/0 40-50 (4.5-5.6) 1 1

* 60/75°C, Cu-Al.

Ground and Neutral Bars Connection Wire Torques