Catalog of stair parts, Railings & Millwork for Stairs · W ith lumber from the ﬁnest mills, we manufacture stair parts in dozens of wood species, including red oak, hard maple,

Catalog of stair parts, Railings & Millwork for Stairs

With lumber from the finest mills, we manufacture stair parts in dozens of wood species, includingred oak, hard maple, hickory, ash, poplar, quarter sawn white oak, and many more.

selection of profiles cover every style, from classic to contemporary. We also produce custom designs and historic replications for both residential and commercial projects.

T

Toll-free: 877-653-9753LOCAL: 847-717-6010 FAX: 847-717-0010

Email: [email protected] Website: www.oldworldmillworks.com

5N200 Wooley Rd. Maple Park IL 60151

2019 marks our 35th Anniversary!

customers, employees, and suppliers: Thank you for

more recently, thank you for joining us as we continue to provide products to stair builders and millwork distributors near and far.

HANDRAILS

BENDING RAILS

FITTINGS

TREADS & RISERS

STRINGERS

STAIR MOULDINGS

STARTING STEPS

BOX NEWELS

TURNED NEWELS

SQUARE BALUSTERS

TURNED BALUSTERS

CUSTOM PRODUCTS

IRON PRODUCTS

WARRANTYWe guarantee the quality of the stair parts and railings that we manufacture for interior use and will replace any defective item if a claim is submitted within 12 months of purchase. OWM reserves the right to inspect any product prior to providing a replacement. Contact Customer Service for more information.

4

5

6

7

Toll-free 877-653-9753 [email protected]

Gooseneck Fittings The Fitting numbers listed below are not complete part numbers. Find the 2-digit profile number for the handrail style needed and add that to the Fitting number. For example, a Straight Gooseneck (#99) for 6010 handrail (Fittings Series #70) is part number 7099.

Rail bolts and furniture plugs are shipped with all fittings. Your Stairs Start Here!™ Proudly Made in the U.S.A. © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc. 9

Fine hardwood treads add a natural touch to modern stair installations.

• Up to 4” thick treads, from quality lumber inyour preferred species

• Square or radiused edges to yourspecifications

• Finished or untrimmed ends

• Odd shapes

• No minimum order

• Pricing quoted upon request

Your Stairs Start Here!™ Proudly Made in the U.S.A. © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc.


Custom Contemporary Treads

10

RADIUSED RETURN

Curved joint at corner

(Left hand shown)

MITERED RETURN 45° joint at corner

(Right hand shown)

Traditional Bullnose Tread profile

STARTING STEPS

BUILT TO ORDER; CALL, EMAIL OR FAX SPECIFICS FOR A QUOTE.

Our treads are made for superior durability and beauty. Choose from traditional bullnose treads with rounded front nose or square nose treads with a 1/8” radius on 2 front edges.

Plain treads without returns (bullnose or square nose) are 1-1/16” thick x 11-1/2” wide. See our price list for part numbers and pricing in 10 different lengths, from 36” up to 120”.

NOTE: Tread length will be approximately 1/4” longer than ordered, for field trimming. Specify on your order if you need them factory trimmed to exact length.

We can quote different thicknesses, sizes and custom shapes as well.

SEPARATE TREAD RETURNS Loose returns are available in both bullnose and square nose profiles to match the treads. Loose returns are 1-1/4” wide by 13-1/2” long, 1-1/16” thick.

RISERS AND STRINGER STOCK See Price List for dimensions on standard risers and stringer stock. Special sizes or thicknesses are will be quoted upon request.

Traditional bullnose treads with attached left hand returns and cove moulding. Also shown are both the classic and the scroll styles of our tread brackets.

ATTACHED RETURNS AVAILABLE RADIUSED OR MITERED

We can attach returns with either radiused or mitered joints, as shown in the diagram below. All part numbers, prices and attachment fees are listed on our Price List for RH, LH and both ends with attached returns. If both, specify throat dimension.

NOTE: Treads with attached returns are 11-1/4” wide, not 11-1/2” wide like ourplain treads.



Bullnose and Square Nose Treads

1/8” RADIUS ON 2 FRONT EDGES

Square Nose Tread profile

11

COVE IN 2 SIZES 8095 3/4” w. x 3/4” h.8096 5/8” w. x 3/4” w.

QR2680 QUARTER ROUND 3/4” w. x 3/4” h.BS2685 BASE SHOE 1/2” w. x 3/4” h.

8080 NOSING 1-1/4” w. X 1-1/16” h.

CAP IN 2 SIZES (May be edge-glued)

6745CAP 7-1/4” w. x 3/4” thick 6747 9” w. x 3/4” thick

CLASSIC TREAD BRACKET

7028 3/8” thick x 11-9/16” w. x 7-5/16” h.

SCROLLED TREAD BRACKET

7029 3/8” thick x 11-9/16” w. x 7-5/16” h.



Misc. Mouldings and Tread Brackets

12

TRADITIONAL LANDING TREAD (STRAIGHT AND BENDING)

8085 5-1/4" w., 4" plow, 1-1/4" nose8085B (Bending) 5-1/4" w., 4" plow, 1-1/4" nose 8086 6-3/4" w., 5-1/2" plow, 1-1/4" nose8086B (Bending) 6-3/4" w., 5-1/2" plow, 1-1/4" nose 8090 3-1/2" w., 2-1/4" plow, 1-1/4" nose8090B (Bending) 3-1/2” w., 2-1/4" plow, 1-1/4" nose 8091 3-1/2" w., 1-3/8" plow, 2-1/8" nose

SQUARE NOSE LANDING TREAD (STRAIGHT AND BENDING ) 1/8" radius on 2 front edges

8085SN 5-1/4" w., 4" plow, 1-1/4" nose8085BSN (Bending) 5-1/4" w., 4" plow, 1-1/4" nose 8086SN 6-3/4" w., 5-1/2" plow, 1-1/4" nose8086BSN (Bending) 6-3/4" w., 5-1/2" plow, 1-1/4" nose 8090SN 3-1/2" w., 2-1/4" plow, 1-1/4" nose8090BSN (Bending) 3-½” w., 2-1/4" plow, 1-1/4" nose 8091SN 3-1/2" w., 1-3/8" plow, 2-1/8" nose

FLAT FILLET: 6 SIZES

6007 1-3/4" wide x 5/16" high (.343")6050F 1-1/4" wide x 5/16" high (.343") 6054 1-3/16" wide x 7/16" high6055F 1-3/16“ wide x 5/16" high (.343") 6060 1" wide x 1/2" high 9007 2-1/4" wide x 5/16" high (.343")

RAISED FILLET: 2 SIZES 6050 1-1/4" wide x 5/16" high, 3/16" at edges 6055 1-3/16" wide x 5/16" high, 3/16" at edges

SHOE RAILS

6006 3" wide x 1" high (Plow 1-3/4" w. x 5/16" d.) 6075 2-1/2" wide x 3/4" high (Plow 1-3/16" w. x 1/4" d.)

6045 2-1/2" w. x 3/4" high (Plow 1-1/4" w. x 1/4" d.) 6910 3-1/2" wide x 3/4" high (Plow 2-1/4" w. x 5/16" d.)

6840 2-5/8" wide x 1-5/8" high (Plow 1-1/4" w. x 1/4" d.)



Landing Treads, Fillet and Shoe Rails

13

PART NUMBER

PANEL TYPE

CAP STYLE(Specify when ordering)

APPROX. CAP

HEIGHT

TRUNK SIZE AND LENGTH

(w/o CAP)TOP

SECTIONMIDDLE

SECTION BASE DIMENSIONS Adjustable?

4075 NONE Flat or Pyramid 2" 3-1/2" x 53" 6-1/4" h. N/A NO BASE NO

2091-ADJ NONE Flat or Pyramid 2" 3-1/2" x 53" 6-1/4" h. N/A 5" w. x 23"h. YES

2091 NONE Flat or Pyramid 2" 3-1/2" x 53" 6-1/4" h. 21-1/2" 5" w. x 23"h. NO

2091-42 NONE Flat or Pyramid 2" 3-1/2" x 41-1/4" 6-1/4" h. 21-1/2" 5"w. x 11-1/4" h. NO

4091-ADJ NONE Flat or Pyramid 2" 4-3/4" x 53" 6-1/4" h. N/A 6-1/4" w. x 23"h. YES

4091 NONE Flat or Pyramid 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4091-42 NONE Flat or Pyramid 2" 4-3/4" x 41-1/4" 6-1/4" h. 21-1/2" 6-1/4" w.x 11-1/4" h. NO

40753-1/2” solid trunk

20913-1/2” solid trunk

YOUR CHOICE OF 2

CAP STYLES

We offer 2 styles of caps for our 4075, 2091, and 4091 series of b o x n e w e l s : p y r a m i d ( a s above) or flat as shown on the i l l u s t r a t i o n s . S p e c i f y y o u r preference when ordering.

4091-ADJ (Adjustable) 4-3/4” trunk with separate base

40914-3/4” trunk

4091-42 4-3/4” trunk

2091-42 3-1/2” solid trunk

2091-ADJ (Adjustable)3-1/2” solid trunk

with separate base



Box Newels

14

4091-FP 4091-RP 4091-F

PART NUMBER

PANEL TYPE CAP STYLE

APPROX. CAP

HEIGHT


(w/o CAP)TOP

SECTIONMIDDLE


4091-F FLUTED Flat or Pyramid 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4091-FP FLAT Flat or Pyramid 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4091-RP RAISED Flat or Pyramid 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4395-SQ LATTICE FLAT ONLY 1" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4395-SQ FLAT CAP ONLY

4091-FP (flat panel) box newels with pyramid caps



Box Newels

The Difference is Craftsmanship

Unlike mass-produced imports, we hand-craft our box newels with precision and carefully sand them one at a time for a superior finish. The result: exceptional quality and value for any installation, in a wide variety of styles and species. Call or email us for pricing on custom designs.

15

mailto:[email protected]


OTHER OPTIONS ON OUR BOX NEWELS

• Paint and stain combination: All of our box newels are available inpoplar with your choice of stainable wood for the cap and middle trim.See price list for details.

• We can split box newels for installation on a wall—a full newel must bepurchased and both halves will be shipped. ($65.00 splitting fee addedto the full newel price.) See photo of an split box newel on page 15.

• Add square sticking to a flat panel box newel for a 10% upcharge. Wecan quote other modifications as well.

• Any style with an attached base can be built as an adjustable newel fora 15% upcharge.

• We can enlarge any 4-3/4” trunk / 6-1/4” base to a 6” trunk with 7-1/2”base for a 15% upcharge. Other sizes will be quoted upon request.

PART NUMBER PANEL TYPE CAP STYLE

APPROX. CAP

HEIGHT


(w/o CAP)TOP

SECTIONMIDDLE


4275 NONE BULLNOSE 2" 3-1/2" x 53" 6-1/4" h. N/A NO BASE NO4295 NONE BULLNOSE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO4295-F FLUTED BULLNOSE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO4295-FP FLAT BULLNOSE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO4295-RP RAISED BULLNOSE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4295-FP FLAT PANEL

4295-RP RAISED PANEL

4295-F FLUTED

4295 4-3/4” trunk

4275 3-1/2” solid trunk

CUSTOM BOX NEWELS We can create historic replications or special designs for residential and commercial installations.

NEW! BULLNOSE

CAP STYLES



Box Newels

16



PART NUMBER PANEL TYPE CAP STYLE

APPROX. CAP

HEIGHT


(w/o CAP)TOP

SECTIONMIDDLE


4675 NONE SLOPE 2" 3-1/2" x 53" 6-1/4" h. N/A NO BASE NO

4696 NONE SLOPE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4696-F FLUTED SLOPE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4696-FP FLAT SLOPE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4696-RP RAISED SLOPE 2" 4-3/4" x 53" 6-1/4" h. 21-1/2" 6-1/4" w. x 23"h. NO

4696-FP FLAT PANEL

4696-RP RAISED PANEL

4696-F FLUTED

4696 4-3/4” trunk

4675 3-1/2” solid trunk

4091-RP (raised panel) box newels in progress.

NEW! SLOPE CAP

STYLES



Box Newels

4696 plain box newels with iron balusters.

17



Fluted: Vertical grooves added to main turned section Octagon: Facets added to main turned sections Twist: Spiral grooves added to main turned section Squared: Profile of turned newel but with square corners. Rope: Rounded spiral profile on center section. Not all options are available on all parts. Refer to each part for availability of options. See Price List for uncharges and set up fees.

SPLIT NEWELS: We can split solid newels for a fee of $15.00. A full newel must be purchased and both halves will be shipped.

PLAIN SQUARE POSTS4070-48 3" x 48" 4085-48 4-1/2" x 48"4070-60 3" x 60" 4085-60 4-1/2" x 60"4070-72 3" x 72" 4085-72 4-1/2" x 72"4070-84 3" x 84" 4085-84 4-1/2" x 84"4070-96 3" x 96" 4085-96 4-1/2" x 96"4080-48 3-1/2" x 48" 4088-48 4-3/4" x 48"4080-60 3-1/2" x 60" 4088-60 4-3/4" x 60"4080-72 3-1/2" x 72" 4088-72 4-3/4" x 72"4080-84 3-1/2" x 84" 4088-84 4-3/4" x 84"4080-96 3-1/2" x 96" 4088-96 4-3/4" x 96"4084-48 4" x 48" 4090-48 5-1/2" x 48"4084-60 4" x 60" 4090-60 5-1/2" x 60"4084-72 4" x 72" 4090-72 5-1/2" x 72"4084-84 4" x 84" 4090-84 5-1/2" x 84"4084-96 4" x 96" 4090-96 5-1/2" x 96"

PART NUMBER

POST SIZE & LENGTH

BEVELED, ACORN OR BALL TOPS

3551-56-BV 3-1/2" x 56" 3-1/2” w. x 3-1/4” h.4051-56-BV 4-3/4" x 56" 4-3/4” w. x 3-1/4” h.4005-48-AT 3-1/2" x 48" 4-1/4" Acorn Top4005-56-AT 3-1/2" x 56" 4-1/4" Acorn Top4070-48-BT 3" x 48" 3-1/2" Ball Top4070-60-BT 3" x 60" 3-1/2" Ball Top4080-48-BT 3-1/2" x 48" 4" Ball Top4080-60-BT 3-1/2" x 60" 4" Ball Top

TOP BLOCK

TURNED SECTION

BOTTOM BLOCK

5-3/4" 23-1/8" 18-1/2"

3551 BV (3-1/2”)

4070 BT (3”) 4080 BT (3-1/2”)

4005 AT (3-1/2”)

PART NUMBER 4537-48 “VINTAGE” NEWEL POST

4-1/2” x 48”Solid post with turned center section

and attached 6” x 6” x 2” cap and trim.

OPTION AVAILABLE: Fluted

4051 BV (4-3/4”)



Newel Posts

4070 (3”)

4080 (3-1/2”)

4084 (4”)

4085 (4-1/2”)

4088 (4-3/4”)

4090 (5-1/2”)

Available in several sizes—see chart below.

*Bottom block shown shorter than actualproportions.

For a truly vintage look, install this newel with our 3700 or 3019 series balusters.

OPTIONS ON NEWELS

18













PART NUMBER

Blank Size

Length *Includes

bottom pinPIN TOP TURNED

SECTIONBOTTOM PIN

*Included in overall length

OPTION: Octagon

5040-31 1-3/16" 31" 3/4" 30-1/2" 3/4" x 1/2" O

5040-36 1-3/16" 36" 3/4" 35-1/2" 3/4" x 1/2" O

5040-39 1-3/16" 39" 3/4" 38-1/2" 3/4" x 1/2" O

5040-41 1-3/16" 41" 3/4" 40-1/2" 3/4" x 1/2" O

5540-31 1-3/4" 31" 1" 30-1/2" 3/4" x 1/2" O

5540-36 1-3/4" 36" 1" 35-1/2" 3/4" x 1/2" O

5540-39 1-3/4" 39" 1" 38-1/2" 3/4" x 1/2" O5540-41 1-3/4" 41" 1" 40-1/2" 3/4" x 1/2" O

TURNED TAPERS

PART NUMBER Blank Size Length

5920-31 1" 31"5920-36 1" 36"5920-41 1" 41"5940-31 1-3/16" 31"5940-36 1-3/16" 36"5940-41 1-3/16" 41"5945-31 1-1/4" 31"5945-36 1-1/4" 36"5945-41 1-1/4" 41"5950-31 1-1/2" 31"5950-36 1-1/2" 36"5950-41 1-1/2" 41"5960-31 1-3/4" 31"5960-36 1-3/4" 36"5960-41 1-3/4" 41"

SQUARES


Balusters


See Page 25 for details on Octagon option.

5040 1-3/16”

5540 1-3/4”

Available in several sizes— see chart below.

24

25

PART NUMBER Blank Size Length *Incl.

bottom pin PIN TOP TOP BLOCK TURNED SECTION BOTTOM BLOCK

BOTTOM PIN *Included in overall

length

OPTION: Octagon

5200-31 1-3/16" 31" 5/8" N/A 22-3/4" 7-1/2" 3/4" x 3/4" O5200-34 1-3/16" 34" 5/8" N/A 22-3/4" 10-1/2" 3/4" x 3/4" O5200-36 1-3/16" 36" 5/8" N/A 27-3/4" 7-1/2" 3/4" x 3/4" O5200-36B 1-3/16" 36" 5/8" N/A 22-3/4" 12-1/2" 3/4" x 3/4" O5200-39 1-3/16" 39" 5/8" N/A 27-3/4" 11-1/4" 3/4" x 3/4" O5200-39B 1-3/16" 39" 5/8" N/A 22-3/4" 15-1/2" 3/4" x 3/4" O5200-41 1-3/16" 41" 5/8" N/A 27-3/4" 13-1/4" 3/4" x 3/4" O5200-41B 1-3/16" 41" 5/8" N/A 22-3/4" 17-1/2" 3/4" x 3/4" O5200-31Q 1-1/4" 31" 5/8" N/A 22-3/4" 7-1/2" 3/4" x 3/4" O5200-34Q 1-1/4" 34" 5/8" N/A 22-3/4" 10-1/2" 3/4" x 3/4" O5200-36Q 1-1/4" 36" 5/8" N/A 27-3/4" 7-1/2" 3/4" x 3/4" O5200-36BQ 1-1/4" 36" 5/8" N/A 22-3/4" 12-1/2" 3/4" x 3/4" O5200-39Q 1-1/4" 39" 5/8" N/A 27-3/4" 11-1/4" 3/4" x 3/4" O5200-39BQ 1-1/4" 39" 5/8" N/A 22-3/4" 15-1/2" 3/4" x 3/4" O5200-41Q 1-1/4" 41" 5/8" N/A 27-3/4" 13-1/4" 3/4" x 3/4" O5200-41BQ 1-1/4" 41" 5/8" N/A 22-3/4" 17-1/2" 3/4" x 3/4" O5205-31 1-3/16" 31" N/A 5-3/4" 17-1/2" 7-3/4" N/A O5205-34 1-3/16" 34" N/A 5-3/4" 17-1/2" 10-3/4" N/A O5205-36 1-3/16" 36" N/A 5-3/4" 17-1/2" 12-3/4" N/A O5205-39 1-3/16" 39" N/A 5-3/4" 17-1/2" 15-3/4" N/A O5205-41 1-3/16" 41" N/A 5-3/4" 17-1/2" 17-3/4" N/A O5205-31Q 1-1/4" 31" N/A 5-3/4" 17-1/2" 7-3/4" N/A O5205-34Q 1-1/4" 34" N/A 5-3/4" 17-1/2" 10-3/4" N/A O5205-36Q 1-1/4" 36" N/A 5-3/4" 17-1/2" 12-3/4" N/A O5205-39Q 1-1/4" 39" N/A 5-3/4" 17-1/2" 15-3/4" N/A O5205-41Q 1-1/4" 41" N/A 5-3/4" 17-1/2" 17-3/4" N/A O


Balusters

See Page 25 for details on Octagon option. Your Stairs Start Here!™ Proudly Made in the U.S.A. © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc.

5200 1-3/16” and 1-1/4”

5205 1-3/16” and 1-1/4”

26

PART NUMBER

BLANK SIZE

LENGTH *Includes

bottom pinPIN TOP TOP BLOCK TURNED

SECTION BOTTOM BLOCKBOTTOM PIN

*Included in overall length

OPTION: Octagon

5300-31 1-3/4” 31" 3/4" N/A 23" 7-1/2" 3/4" x 1/2" O

5300-34 1-3/4” 34" 3/4" N/A 23" 10-1/2" 3/4" x 1/2" O

5300-36 1-3/4” 36" 3/4" N/A 28" 7-1/2" 3/4" x 1/2" O

5300-36B 1-3/4” 36" 3/4" N/A 23" 12-1/2" 3/4" x 1/2" O

5300-39 1-3/4” 39" 3/4" N/A 28" 10-1/2" 3/4" x 1/2" O

5300-39B 1-3/4” 39" 3/4" N/A 23" 15-1/2" 3/4" x 1/2" O

5300-41 1-3/4” 41" 3/4" N/A 28" 12-1/2" 3/4" x 1/2" O

5300-41B 1-3/4” 41" 3/4" N/A 23" 17-1/2" 3/4" x 1/2" O

5305-31 1-3/4” 31" N/A 6-3/4" 17-1/2" 6-3/4" N/A O

5305-34 1-3/4” 34" N/A 6-3/4" 17-1/2" 9-3/4" N/A O

5305-36 1-3/4” 36" N/A 6-3/4" 17-1/2" 11-3/4" N/A O

5305-39 1-3/4” 39" N/A 6-3/4" 17-1/2" 14-3/4" N/A O

5305-41 1-3/4” 41" N/A 6-3/4" 17-1/2" 16-3/4" N/A O


Balusters

5300 1-3/4”

5305 1-3/4”

See Page 25 for details on Octagon option. Your Stairs Start Here!™ Proudly Made in the U.S.A. © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc. 27

28

PART NUMBER Blank Size Length

*Incl. bottom pin PIN TOP TOP BLOCK TURNED SECTION BOTTOM BLOCK

BOTTOM PIN *Included in overall

length

OPTIONS - See key

3700-36 2-1/4" 36" 7/8" N/A 29-3/8" 6-5/8" 1" x 1/4" F3700-39 2-1/4" 39" 7/8" N/A 29-3/8" 9-5/8" 1" x 1/4" F3700-41 2-1/4" 41" 7/8" N/A 29-3/8" 11-5/8" 1" x 1/4" F5077-31 1-3/4” 31" 7/8" N/A 26" 4-1/2" 3/4" x 1/2" F, O5077-36 1-3/4” 36" 7/8" N/A 31" 4-1/2" 3/4" x 1/2" F, O, T5077-39 1-3/4” 39" 7/8" N/A 34" 4-1/2" 3/4" x 1/2" F, O5077-41 1-3/4” 41" 7/8" N/A 36" 4-1/2" 3/4" x 1/2" F, O, T5045-31 1-3/16" 31" 3/4" N/A 24" 6-1/2" 3/4" x 1/2" F, O5045-34 1-3/16" 34" 3/4" N/A 24" 9-1/2" 3/4" x 1/2" F, O5045-36 1-3/16" 36" 3/4" N/A 24" 11-1/2" 3/4" x 1/2" F, O5045-39 1-3/16" 39" 3/4" N/A 24" 14-1/2" 3/4" x 1/2" F, O5045-41 1-3/16" 41" 3/4" N/A 24" 16-1/2" 3/4" x 1/2" F, O5045-31Q 1-1/4" 31" 3/4" N/A 24" 6-1/2" 3/4" x 1/2" F, O5045-34Q 1-1/4" 34" 3/4" N/A 24" 9-1/2" 3/4" x 1/2" F,O5045-36Q 1-1/4" 36" 3/4" N/A 24" 11-1/2" 3/4" x 1/2" F, O5045-39Q 1-1/4" 39" 3/4" N/A 24" 14-1/2" 3/4" x 1/2" F, O5045-41Q 1-1/4" 41" 3/4" N/A 24" 16-1/2" 3/4" x 1/2" F, O5545-34 1-3/4” 34" 3/4" N/A 28-5/8" 4-7/8" 3/4" x 1/2" F, O5545-36 1-3/4” 36" 3/4" N/A 28-5/8" 6-7/8" 3/4" x 1/2" F, O5545-39 1-3/4” 39" 3/4" N/A 28-5/8" 9-7/8" 3/4" x 1/2" F, O5545-41 1-3/4” 41" 3/4" N/A 28-5/8" 11-7/8" 3/4" x 1/2" F, O


Balusters

OPTIONS: F = Fluted; O = Octagon; T = Twist See Page 25 for details. Your Stairs Start Here!™ Proudly Made in the U.S.A. © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc.

5045 1-3/16” and 1-1/14”

5545 1-3/4”

5077 1-3/4”

3700 2-1/4” Laminated Blank

29


PART NUMBER BLANK SIZE LENGTH TURNED SECTION BOTTOM BLOCK

C-5015-31 1-1/4” 31” 20-1/2” above urn 10-1/2” with urnC-5015-34 1-1/4” 34” 23-1/2” above urn 10-1/2” with urnC-5015-36 1-1/4” 36” 25-1/2” above urn 10-1/2” with urnC-5015-39 1-1/4” 39” 28-1/2” above urn 10-1/2” with urnC-5015-41 1-1/4” 41” 30-1/2” above urn 10-1/2” with urnC-5015-43 1-1/4” 43” 32-1/2” above urn 10-1/2” with urnC-5060-36 1-1/4” Square 36" N/A N/AC-5060-42 1-1/4” Square 42” N/A N/AC-5260-36 1-1/2” Square 36" N/A N/AC-5260-42 1-1/2" Square 42" N/A N/AC-5360-36 1-3/4” Square 36” N/A N/AC-5360-42 1-3/4" Square 42" N/A N/AC-5040-36 1-1/8” 36” 36” N/AC-5040-39 1-1/8” 39” 39” N/AC-5040-41 1-1/8” 41" 41” N/AC-5611-34 1-3/4" 34” 25-1/2” 8-1/2”C-5611-36 1-3/4" 36” 27-1/2” 8-1/2"C-5611-39 1-3/4" 39" 27-1/2" 11-1/2”C-5611-41 1-3/4" 41" 27-1/2" 13-1/2”

Your Stairs Start Here!™ © 2019 Old World Millworks, Div. of C.A. Larson & Sons Inc.

White Primed and Iron Balusters

IRON BALUSTERS

F o r a c o m p l e t e s e l e c t i o n o f i r o n balusters, please see our separate I ron Baluster booklet.

Primed balusters are included in the Iron Booklet.

C-5015 C-5060 1-1/4”C-5260 1-1/2”C-5360 1-3/4”

C-5611C-5040

• These balusters have a glosswhite primer finish and shouldbe prepped and painted forbest results.

• These parts are not made byOWM and do not match OWMprofiles—they may beimported and the actualproducts details anddimensions may vary.

• See Iron Baluster booklet formore details on primedbalusters, including warrantyand return policies.

30


Accessories


1 PIECE Handrail Bracket

3611 3621 3622

See chart below for sizes and finishes.

2 PIECE Handrail Bracket

3631 3632

See chart below for sizes and finishes.

7317 ROUND ROSETTE 4-3/4” diameter

7337 OVAL ROSETTE 4-5/8”w. x 5-7/8” h.

7337S SMALL OVAL ROSETTE 4-3/16”w. x 5-3/8” h.

7338 SQUARE ROSETTE 4-5/8” X 4-5/8”

7339 RECTANGULAR ROSETTE 4-5/8”w. x 5-1/2” h.

7339-A ARCHED ROSETTE 4” w. x 5-1/2” h.

1305 RAIL FASTENING KIT Includes 10 each:

Hanger Bolts, Washers, Nuts & Furniture Plugs

1310 FURNITURE PLUGS Pkg. of 25 Plugs

PART NUMBER STYLE NUMBER FINISH

1 Pc. Handrail Bracket - 3-1/4” Wall-to-Center573011 3611ABZ ANTIQUE BRONZE573017 3611AN ANTIQUE NICKEL573013 3611B FLAT BLACK573019 3611ORB OIL RUBBED BRONZE573018 3611ORC OIL RUBBED COPPER573012 3611PC POWDER COATED (GRAY/BLACK)573016 3611SAT SATIN BLACK573026 3611AG ASH GRAY 1 pc. Handrail Bracket - 2-3/8" Wall-to-Center573009 3621AB ANTIQUE BRASS573008 3621B FLAT BLACK573010 3621BC BRUSHED CHROME573007 3621BN BRUSHED NICKEL573006 3621C CHROME573015 3621ORB OIL RUBBED BRONZE573003 3621PB POLISHED BRASS573021 3621SAT SATIN BLACK 1 pc. Handrail Bracket - 3-3/8" Wall-to-Center573014 3622PB POLISHED BRASS573024 3622BN BRUSHED NICKEL573025 3622ORB OIL RUBBED BRONZE 2 pc. Wall Rail Bracket - 2-3/4" Wall-to-Center573022 3631B FLAT BLACK573023 3631SAT SATIN BLACK573039 3631BN BRUSHED NICKEL573105 3631ORB OIL RUBBED BRONZE573002 3631PB POLISHED BRASS573020 3631C CHROME 2 pc. Long Arm Wall Rail Bracket - 3-1/2" Wall-to-Center573135 3632ORB OIL RUBBED BRONZE573138 3632BN BRUSHED NICKEL573038 3632PB POLISHED BRASS* Brackets are individually bagged with installation hardware.

1

31

Manufacturer & Supplierof Stair Parts & Railings

5N200 Wooley Rd. Maple Park IL 60151

[email protected]

Toll-free: 877-653-9753

Documents

Catalog of stair parts, Railings & Millwork for Stairs · W ith lumber from the ﬁnest mills, we manufacture stair parts in dozens of wood species, including red oak, hard maple,