Catalog of Slurry Testing__ Equipments

8/9/2019 Catalog of Slurry Testing__ Equipments

1/20

Qingdao Senxin Co.,Ltd Tel:+86-15898857061 Email:[email protected] Web:www.qdsenxin.com

Medium pressure filter press

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size ZNS-2ZNS-2AZNS-5A(API)

Technical parametersTechnical parametersTechnical parametersTechnical parameters Specifications & size:ZNS-2 Filter loss area:45.6cm2 Working

pressure:0.69MPa Repetitive error:1.5ml Configuration: Inflator air supply attached Overall

size:200150400 Specifications & size:ZNS-2A Filter loss area:45.6cm2 Working pressure:0.69MPa

Repetitive error:1.5ml Configuration:stage formStainless cup attached Overall

size:200150400 Specifications & size:ZNS-5A Filter loss area:45.6cm2 Working pressure:0.69MPaRepetitive error:1.5ml Configuration:stage formAmirican API standard Overall

size:240200500

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The product is mainly used to measure the water loss and mud cake thickness

of drilling fluid after the loss of water. It is widely used in all the big oil fields, oil fields

exploration and analysis as well as measurement of drilling fluid in the laboratory. It has the

characters of simple operation, convenient use, good stability and small repetitive error in water

loss measure.

API filter press

This API filter press is a filter press with differential pressure of 0.69MPa. It can be used to

measure the filter loss of drilling fluids and prepare the mud cake formed after filtration. The

instrument has been widely applied in the oil fields, geological exploration department and

laboratory for analysis and measurements of drilling fluids.

2.2.2.2. ModelModelModelModelssss and specificationand specificationand specificationand specificationssss

number Model Name Attachments

1 ZNS-5A Intermediate pressure filter press Single drilling fluid cup

2 SD6AMulti-unit intermediate pressure filter

pressSix drilling fluid cups

3333.... The major techThe major techThe major techThe major technical parametersnical parametersnical parametersnical parameters ofofofof the instrumentthe instrumentthe instrumentthe instrument

Sequence number Name Technical Parameter

1 Effective Filtration Area 45.6cm2

2 Working Pressure 0.69MPa(100PSI)

3 Amount of the drilling fluid injected 350ml/unit

Multi-link filter press

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size SD3SD4SD6SD6A

Technical parametersTechnical parametersTechnical parametersTechnical parameters Article name:three link water loss apparatus Specifications & size:SD3Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min Configuration:long three link

Overall size:650200500 article name:four link water loss apparatus Specifications & size:SD4

Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min Configuration:long four link

Overall size:960200500 article name:six-link water loss apparatus Specifications & size:SD6

Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min Configuration:long six link

round six link Overall size:1480200500 article name:six link water loss apparatus

Specifications & size:SD6A Filter loss area:45.6cm2 Working pressure:0.69MPa filter time:30min


2/20


Configuration:long six linkStainless cup attached Overall size:1480200500

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & charactersThe apparatus is used to measure the static water loss of drilling fluid

under a certain pressure within a certain time. At the same time, it can also measure mud cake

after the water loss. Multi-link water loss apparatus can do several experiments at the same time

and improve teh efficacy.

HTHP filter press

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size GGS42-1 GGS42-2

Technical parametersTechnical parametersTechnical parametersTechnical parameters Working temperature150 Working pressure4.2MPa Filter loss area

22.6cm2 Repetitive error2ml Cup capacity250ml Overall size150200400

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters It is used to measure the water loss of drill fluid and mud cake thickness

after water loss in the condition of HTHP. It is widely used in all oil fields, scientific reseach

institutions, laboratories and other departments and has the characters of simple operation, high

accuracy and small repetitive error. Adopting two layers of mesh screen can satisfy the measurement

of cement mud.

HTHP dynamic filter press

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size GGSD71

Technical parametersTechnical parametersTechnical parametersTechnical parameters Power supply220V5% 50Hz Power1.2KW Speed adjustment ranging0-800

r/min Air supply Azote safe work pressure of drilling well room 8.5MPa Safe work pressure of

return pressure room 5 MPa Drilling fluid Cup capacity 500ml Return pressure receiver capacity

95ml Overall size400250700

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters HTHP dynamic water loss meter measure the water loss of drilling fluid

and cement slurry in the simulant downhole operation condition (hthp) and supplies data for the

realization of scientific, quick, high quality and safe well drilling.It is applicable to:from

room temperature to 232Max Working pressure in drilling fluid room 7.1MPafilter loss

differential pressure: 3.5MPa Filter loss area: 22.6cm2collected static water loss and formed

filter cake thickness within 30 minutes. The temperature scope: from room temperature to 150

Max working pressure in drilling fluid room 7.1MPafilter loss differential 3.5MPa Filter

loss area: 22.6cm2colleted dynamic water loss and fromed filter cake thicknes within 30 minutes.

Two layers mesh screen can satisfy the measurement for cement slurry.

HTHP filter press

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size GGS71-A

Technical parametersTechnical parametersTechnical parametersTechnical parameters Max working pressure 232 Slurry cup Working pressure 7.1MPa Filter

loss area 22.6cm2 Slurry Cup capacity 500ml Repetitive error2ml Overall size

305205640

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The product adopts American technology to stimulate the water loss speed

of drilling fluid in the condition under deep well (hthp). It is the necessary analytical measuring

instrument for the scientific research in all oil fields and research institutions. It has the

characters of steady function and small repetitive error. Adopting two layors of mesh screen can

satisfy the measurement of cement mud.


3/20


4/20


Heating cup for viscosity measure

Specifications & size: JR

Technical parameters Power supply220V10% 50Hz Rated power300W Temperature controlfrom

room temperature to 93 Heating time30min Overall size130130140

Purpose & characters JR type heating cup for viscosity measure is mainly used with ZNN-D6 type

electric six speed rotational viscometer, simulate the constant temperature of drilling fluid

in deep well and measure rheological parameter. It can also be used to heat the liquid and keep

constant temperature. The apparatus adopts bimetal thermometer to display the temperature and

has teh characters of accurate measure, direct reading, reasonable structure, robustness, and

standing wear.

six speed rotational viscometer

Specifications: ZNN-D6 viscometer

Technical parameter: Measuring range: newtonian fluid 1-300mPaS non-newtonian fluid 1-150mPaS

Shearing stress0-153.3Pa Electric machine efficiency7.5W/15W Power220V10% 50Hz Rotary

speed36100200300600r/min Overall size29017041

Purpose & characteristics

The apparatus can measure all kinds of rheological parameter, draw flow curve according to the

multipoint measure data, determine the flow pattern of liquid during flow behavior, choose the

proper formula and take the comparatively accurate measurement for non-newtonian fluid. It has

the characters of simple operation and high accuracy. It applies to visicosity measurement of

drilling fluid in all the big oil fields, sicentific research institutions and laboratories and

it also applies to geology, chemical industry, coal, wine making and etc.

Digital twelve speed rotational

viscometer

ZNN-D12 rotary viscometer is one of the main kinds of mud analyzer .it can be used to measure

any kinds of rheological parameters ,and according to the flow curve definite rheological

behaviors of the liquid .its a sort of indispensable testing instruments in the modern drilling .

It can be used to measure :

1. Newtonian fluid (mineral oil): viscosity coefficient .

2. plastic fluid : plastic viscosity ,yield point, apparent viscosity and gel strength .

3. pseudoplastic fluid (most of the industry fluids) :flow behavior index n and consistency

index k .

2.B2.B2.B2.Basicasicasicasic parameters of the instrumentparameters of the instrumentparameters of the instrumentparameters of the instrument

Scope of the viscosity measurement :

For Newtonian fluid : 0-300mpa.s

For non-Newtonian fluid:0-150mpa.s

shear stress : 0-153.3pa


5/20


1.power section : high quality stepper motor and electronic components are adopted to down the

noisy and trouble.

2.gearshift section : twelve speeds

Velocity 1.2.3.6.30.60.90.100.180.200.300.600r/m

3. Measuring section

Its consist of torsion spring subassembly ,dial subassembly ,outer and inner cylinders .the

inner cylinder is taper fitted to shaft .the outer is threaded connection .

Funnel viscometer

Specifications & size: ZLN-1ZLN-1A

Technical parameters Spec. & Size:ZLN-1 Funnel capacity:700ml Measuring cup:500ml Measuring

Accuracy:150.5s Configuration: Be made of iron Overall size:150150380 Spec. & Size:ZLN-1AFunnel capacity:700ml Measuring cup:500ml Measuring Accuracy:150.5s Configuration: Be made of

stainless steel Overall size:150150380

Purpose & characters Marsh funnel viscometer is used to measure the viscosity of drilling liquid

everyday and has been widely used in petroleum, geology and other departemtns.

Marsh Funnel viscometer

Specifications & size:Specifications & size:Specifications & size:Specifications & size: MLN-2MLN-3MLN-4

Technical parametersTechnical parametersTechnical parametersTechnical parameters Spec. & Size:MLN-2 Funnel capacity:1500ml Measuring cup:946ml Measurin

Accuracy:260.5s Configuration: plastic cup attached Overall size:150150380Spec. &

Size:MLN-3 Funnel capacity:1500ml Measuring cup:946ml Measuring Accuracy:260.5s

Configuration: Stainless steel cup attached Overall size:150150380Spec. & Size:MLN-4 Funne

capacity:1500ml Measuring cup:946ml Measuring Accuracy:260.5s Configuration: Stainless steel

cup and stopwatch attached Overall size:150150380

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters Marsh funnel viscometer is used to measure the viscosity of drilling liquid

every day. It is manufactured according to American API standard and widely used in petroleum,

geology and other departments.

Liquid densimeter

Specifications:Specifications:Specifications:Specifications: YM

Technical parametersTechnical parametersTechnical parametersTechnical parameters Measuring range:0.96-2.0g/cm38-17lbgal,0.96-2.5g/cm38-21lb

gal ,0.96-3.0g/cm38-25lbgal ,0.7-2.4g/cm3 5.8-20lbgal ,0.1-1.5g/cm3 0.8-13lb

gal , Measuring Accuracy:0.01g/cm3 Configuration: Engineering plastics/metal Overall

size:50060120

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & charactersThe product is special purpose apparatus for measuring density of drillin

fluid and other liquid matter. It is also applicable to teh measurement of liquid density in all

the big oil fields, scientific research institutions and laboratories. It has teh characters of

data stablization and high accuracy.


6/20


Liquid pressure densimeter

Specifications:Specifications:Specifications:Specifications: YYM

Technical parametersTechnical parametersTechnical parametersTechnical parameters Measuring range 0.90-3.1g/cm3(7.5-26lb/gal) Measuring Accuracy

0.01g/cm3 Overall size55080150

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters Liquid pressure densimeter compresses and gets rid of the gas in liqui

by pressurizing the liquid, so it can measure the actual density of liquid comparatively.

Filter cake adhesion factor

measuring meter

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size NF-1NF-2

Technical parametersTechnical parametersTechnical parametersTechnical parameters Working pressure3.5MPa Adhering pan diameter50.70.05 Tosional

Repetitive error 10% Overall size:150150500

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters This instrument is used to measure the filter cake stuck factor and offer

correct and reliable data for preventing drilling bit block and securing the quick forward safety.

It has teh characters of compact structure, precise structure and simple operation.

Viscosity factor meter

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size NZ-3A

Technical parametersTechnical parametersTechnical parametersTechnical parameters Power supply220V 50HZ Turnover speed5.5-6.5minutes/round Angle reading

Accuracy by number0.5 Overall size 350210210

Purpose &Purpose &Purpose &Purpose & characterscharacterscharacterscharactersViscosity factor meter is used to measure and appraise the lubricity of

drilling fluid and quality compatibleness of drilling fluid lubricant. The meter has the characters

of reasonable structure, reliable work, high accuracy and good repetitiveness.

Flotation buoy shearing force meter

Specifications & sizeSpecifications & sizeSpecifications & sizeSpecifications & size QL

Technical parametersTechnical parametersTechnical parametersTechnical parameters Floating buoy weight50.05g Surveyors rod range 0-20Pa Overall size

100100190

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters QL type flotation buoy shearing force meter is used to measure the strength

of net rack structure, which is formed among teh clay particles when the drilling fluid is in static

situation. Measured shearing force and final shearing force have significance to drilling and guard

aperture.

Thickness & tenacity automatic

SpecificationsSpecificationsSpecificationsSpecifications ZN-

Technical parametersTechnical parametersTechnical parametersTechnical parameters Measuring range 0-27mm Distinguishability 0.01mm Accuracy 0.03mm

Repeating error 0.02mm Overall size 400300650

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters This intellecturalized automatic measuring apparatus is used to measure

all the parameter about filter cake that forms after the drilling fluid lossess the water. The

parameters include gross thickness of filter cake, real thickness, compressureion ratio, tenacity

and strength.


7/20


measuring apparatus for drilling

fluid filter cake

Swelling capacity measuring

apparatus

SpecificationsSpecificationsSpecificationsSpecifications ZNP-1

Technical parametersTechnical parametersTechnical parametersTechnical parameters Measuring cylinder capacity 24ml Measuring error 0.01mm Overall size400180420

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters ZNP-1 type swelling capacity is mainly used to check and measure swelling

change of mud shale in the condition of normal temperature and pressureure, then appraise the

rejection characteristic of all kinds of treating compound to mud shale.

HTHP shale dilatometer

SpecificatiSpecificatiSpecificatiSpecificationsonsonsons HTP-1

Technical parametersTechnical parametersTechnical parametersTechnical parametersPower supply220V5% 50Hz Working temperature 120 Working pressure

3.5MPa Measuring range 15mmDistinguishability 0.01mm Combined Measuring error 0.05mm

Overall size 450350800

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters HTHP shale dilatometer is used to measure the expanding property of shalein the simulant downhole conditions that the temperature is under 120 and differential pressure

is 3.5MPa. It provides a kind of advanced measuring method for researching the stability of borehole

face, evaluating and choosing the good drilling-fluid formula that can prevent excessive

penetration. At the same time, it can also be used to analyze the function of all kinds of distention

inhibiting agent and optimizing the additive concentration.

Wet sieving apparatus

SpecificationsSpecificationsSpecificationsSpecifications SSH-1

Technical parametersTechnical parametersTechnical parametersTechnical parameters Working pressure 0.07MPa Slurry cup size 7886 Mesh of filter screen

200 mesh325 mesh Filter loss area 45.8mm2 Overall size 190190300

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The principle of SSH-1 type wet sieving apparatus is following. Bring

pressure to bear on the water, through the injecting nozzle wet sieving the drilling fluid and

bononian stone that need measuring on the filter screen within the limited time. Determine the

slit content of drilling fluid and bononian stone, get the screen tailings percent. The instrument

has the characters of easy operation and convenient maintenance.

Mud silt content measuring

instrument

SpecSpecSpecSpecificationsificationsificationsifications ZNH-1

Technical parametersTechnical parametersTechnical parametersTechnical parameters Filter screen200 mesh Measuring cylinder capacity 200ml Overall

size 26012080

Purpose & charactersThe instrument is used to measure the slit content in drilling mud. Separate

the slit by the water from the drilling fluid, collect


8/20


Mud solid phase content measuring

instrument (retort kit-20ml)

SpecificationsSpecificationsSpecificationsSpecifications ZNG-1

Technical parametersTechnical parametersTechnical parametersTechnical parameters Cup capacity 200.1ml Heating efficiency 100W Recovery precision

accuracy 2% Overall size 220120280

Purpose &Purpose &Purpose &Purpose & characterscharacterscharacterscharacters Mud solid phase content measuring instrument is specially used to measure

the solid phase content in drilling fluid and has the characters of directness, rapidness and

accuracy.

Retort kit (50ml)

1.1.1.1. DescriptionDescriptionDescriptionDescription

Solid Phase Content Analyzer is used to separate and determine the content of water, oil and solid

of water-based drilling fluid. It adopts the externally heated distilling pattern with a large

matrass. Oil and water is separated and condensed into the measuring cylinder when a fix quantity

of 50ml drilling subjects to high temperature. The quality or percent bulk of oil, water and solid

can be calculated. Compared with normal (20ml) pattern, the test precision is enhanced because

the adoption of large content externally heated pattern and avoid the danger of overheated. It

can be operated easily and used both in lab and site to learn about the solid concentration. The

character is simple structure and easy operation and is a ideal special instrument.

2.Model and specification2.Model and specification2.Model and specification2.Model and specification

ZNG-1

3.3.3.3. The main technical parameters of the apparatusThe main technical parameters of the apparatusThe main technical parameters of the apparatusThe main technical parameters of the apparatus

Sequence number Name Technical specifications

1 Power supply 220V 50Hz

2 Power 600W

3 Volume of retort 500.2ml

4 Recovery ratio of liquid>98%

5 Insulated resistance >110M

Spot drilling fluid analyzing

instrument container a container

SpecificationsSpecificationsSpecificationsSpecifications A+B container

Technical parametersTechnical parametersTechnical parametersTechnical parametersA container. Article name: Electric six speed rotational viscometer:ZNN-D6

Quantity:1 set Article name:Uniaxial high speed stirring machine Size:GJ-3A Quantity:1 set Overall

size 820270490

B container.1) Model ZNG.2) Model ZNS-2.3) Model YM. 4) Model ZNH-15) Model MLN-4

Purpose & characters The instrument applies to well drilling fields with the

characters of easy carrying and operation. It is a set of comprehensive instruments for

measuring many functions of slurry.


9/20


Spot water analysis container C/D

container

SpecificationsSpecificationsSpecificationsSpecifications C+D container

Technical parametersTechnical parametersTechnical parametersTechnical parameters Article name: Brown narrow mouth bottle Size:250ml Quantity:8 pieces

Article name: White narrow mouth bottle Size:250ml Quantity:8 pieces Article name:Medicine spoon

Size:3 pieces/ group Quantity:1 set Article name: Tool bag Size:41 pieces Quantity:1 set Article

name: Electric conductivity apparatus Quantity:1 set Article name:Multipurpose socket Quantity:1

pieces Article name: Electronic scales Size:200k Quantity:1 set Article name:AcidimeterSize:PH-525 Quantity:1 set Article name:Enclosed type electric stove Size:1000W Quantity:1 set

Overall size 820270490

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The instrument is a set of ideal, convenient, comprehensive instruments

for well drilling spot and field exploration with the characters of easy carrying and simple

operation.

Lost circulation material test

device

SpecificationsSpecificationsSpecificationsSpecifications QD-2

Technical parametersTechnical parametersTechnical parametersTechnical parameters Feed cylinder capacity 4000ml Air supplyAzote Working pressure 7.1MPa

Depth 0-77mm Overall size 4604601050

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters It is used to appraise teh material, which is used to rebuild circulation.

Determine the leakage stoppage ability of material to the filter loss layer in order to choose

the proper lost circulation material. Determine the leakage stoppage efficiency and volume of lost

circulation before the formation of lost circulation.

Portable roller heating furnace

(portable roller oven)

SpecificationsSpecificationsSpecificationsSpecifications GRL3

no name specification

1 Power supply 220V5% 50Hz

2 motor 120W

3 Heating power 500W

4 Temperature use scope 0~300

5 Temperarture controlled precision 5

6 Roller speed 50r/min,

7 mud speeds of flow 0.16 m/s,

8 Number.of aging cell 2

9 Working volume 300260210mm

10 Overall dimension 520460400mm

Technical parametersTechnical parametersTechnical parametersTechnical parameters Working temperature 50-300 Roller rotation speed 1125r/min

Heating efficiency 500W Working area 300250220mm Overall size 660334270mm

Purpose & characPurpose & characPurpose & characPurpose & charactersterstersters The temperature control part of heating furnace adopts the digital electric

regulator. Display accuracy of digital LED is high. The temperature can be set directly. It is

easy to operate and carry for its small volume. It can be used to research into the basic ion exchange

reaction (Ga + disposed slurry) in the newly prepared slurry and determine the stability of adjuvant

in slurry (such as all kinds of thinner and organic glue). It can also be used to mix the chemical

medicine, liquid and powder substance and remove the gas from the liquid.


10/20


Digital roller heating furnace

(digital roller oven)

GRL-5 oven specification



2 motor 180W




6 Roller speed 50r/min

7 mud speeds of flow 0.16 m/s

8 Number of aging cell 4



PurposePurposePurposePurpose & characters& characters& characters& characters The temperature control part of heating furnace adopts the microcomputer

intellectual control technology and you can directly set the temperature digital display. The

accuracy is high, and the device is safe and reliable. It can be used to research into the basic

ion exchange reaction (Ga + disposed slurry) in the newly prepared slurry and determine thestability of adjuvant in slurry (such as all kinds of thinner and organic glue). It can also be

used as dry box, aging oven and ball grinding mill. It can be used to mix the chemical medicine,

liquid and powder substance and remove the gas from the liquid.



SpecificationsSpecificationsSpecificationsSpecifications XGRL2

Technical parametersTechnical parametersTechnical parametersTechnical parameters

Working temperature 50-260 Roller rotation speed 50r/min Heating efficiency 1.4KW Working

area 555355365mm Overall size 813673740mm

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The temperature control part of heating furnace adopts the microcomputer


accuracy is high, and the device is safe and reliable. It can be used to research into the basicion exchange reaction (Ga + disposed slurry) in the newly prepared slurry and determine the

stability of adjuvant in slurry (such as all kinds of thinner and organic glue). It can also be



digital roller oven

GRL-7 roller oven specification


1 Power supply 220V5% 50Hz ,

2 motor 370W


4 Temperature use scope 0~3005 Temperarture controlled precision 5




9 Working volume

10 Overall dimension


11/20




XGRL-4 roller oven specification



2 motor 370W

3 Heating power 700W2








Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters The temperature control part of heating furnace adopts the microcomputer


accuracy is high, and the device is safe and reliable. It can be used to research into the basic

ion exchange reaction (Ga + disposed slurry) in the newly prepared slurry and determine thestability of adjuvant in slurry (such as all kinds of thinner and organic glue). It can also be



Aging cell

This High Temperature Aging Cell has 500-1000 ml Volume, 303 stainless steel with pressurization

valve.

High Temperature Aging Cells have been developed to aid in predicting the performance of a drilling

fluid under static, high temperature conditions. Recent drilling fluid research has indicated the

desirability of applying pressure before heating samples to elevated temperatures in aging tests.

For this purpose, we has available aging cells which can be pressurized with nitrogen or carbon

dioxide to a desired pressure to prevent boiling and vaporization of the drilling fluid before

it reaches the test temperature. Temperatures and the resulting vapor pressures up to approximately

500F can be accommodated in aging cells which have been equipped with a valve for pre-pressuring.

High Temperature Aging Cells are designed for testing fluids at temperatures as high as 500 F.

The 500ml are provided for greater volumes of fluid to be tested as higher temperatures, with

sufficient space for expansion as a safety factor.

Some cells include a valve and pressure connection for pre-pressuring the cell before heating.

The connection to the pressure source is made in the same manner as that used on the HPHT filter

presses so that standard nitrogen or CO2manifolds can be used for this purpose.

Pressing machine

SpecificationsSpecificationsSpecificationsSpecifications PM10

Technical parametersTechnical parametersTechnical parametersTechnical parametersMaxium working pressure 10000kg

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & characters It is mainly used with HTHP dilatometer manufactured by our plant. It can

also be used to press the other sample. The structure is compact and durable.


12/20


Double-passage mud shale

dilatometer

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & charactersThis instrument is mainly used to check and measure swelling change of mud

shale in the condition of normal temperature and pressure, then appraise the rejection

characteristic of all kinds of treating compoundto mud shale.Adopt the accuracy of double-passage

contrast measure, connect with computer to accumulate data and coordinate draft, possessing

characters of compact structure, simple operation, visible reading and high accuracy.

Technical parametersTechnical parametersTechnical parametersTechnical parameters HTPHTPHTPHTP----2A2A2A2APower supplycomputer 200V5%measuring instrument 4 7# batteries of 1.5V

Measuring cylinder capacity24ml

Measuring error0.01mm

Measuring range10mm

Combined Measuring error0.05mm

Inflator air supply device

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & charactersThis device is used for desktop water loss instrument and multi-link

instrument as manual pressurizing device. It is also applicable to low-capacity air supply and

the other devices as pressure air supply, teh pressure of which is less than 1MPa.

The device is easy to inflate and operate, gas quantities are available in abundance and it is

convenient to use.

Technical parametersTechnical parametersTechnical parametersTechnical parametersAir storage capacity170mlSafe working pressure1MPa

Electrical Stability Tester

1. Summary1. Summary1. Summary1. Summary

The Model DWY-2 Electrical Stability Tester is a kind of instrument used mainly to measure

the relative stability of water in oil (w/o) emulsion. In addition, the electrical resistance caused

by impurity present in electrolytic solution and the stability to time can be predicted from the

measurements of the relative emulsion stability. This instrument also can be used to evaluate the

oil base drilling fluids, oil base releasing stuck agent, cement and crack water etc. Therefore,

it can be extensively applied in petroleum, metallurgy, drilling crew and research institutions,

etc.

2. Model and specification2. Model and specification2. Model and specification2. Model and specification

Model: DWY-2

3.3.3.3. TheTheTheThe main technical parameters of apparatusmain technical parameters of apparatusmain technical parameters of apparatusmain technical parameters of apparatus

Sequence number Name Technical specification

1 Power supply AC220V5%, 50Hz

2 Output voltage 0~2000V, 340Hz

3 Distance of electrodes 1.59mm(0.061in)

4 Power 750W


13/20


14/20


Lubricity (Surface to Surface Drag Test)Lubricity (Surface to Surface Drag Test)Lubricity (Surface to Surface Drag Test)Lubricity (Surface to Surface Drag Test)

The more common lubricity test measures fluid resistance of various lubricating additives. ForThe more common lubricity test measures fluid resistance of various lubricating additives. ForThe more common lubricity test measures fluid resistance of various lubricating additives. ForThe more common lubricity test measures fluid resistance of various lubricating additives. For

the standard lubricity coefficient test, 150 inthe standard lubricity coefficient test, 150 inthe standard lubricity coefficient test, 150 inthe standard lubricity coefficient test, 150 in----pounds of force (the equivalent of 5,000 tpounds of force (the equivalent of 5,000 tpounds of force (the equivalent of 5,000 tpounds of force (the equivalent of 5,000 to 10,000o 10,000o 10,000o 10,000

PSI pressure on the intermediate fluid) is applied between two hardened steel surfaces, a block,PSI pressure on the intermediate fluid) is applied between two hardened steel surfaces, a block,PSI pressure on the intermediate fluid) is applied between two hardened steel surfaces, a block,PSI pressure on the intermediate fluid) is applied between two hardened steel surfaces, a block,

and a ring rotating at 60 RPM.and a ring rotating at 60 RPM.and a ring rotating at 60 RPM.and a ring rotating at 60 RPM.

1. Usage1. Usage1. Usage1. Usage

This Lubricity Tester is used to measure the lubricity of drilling fluids, so as to provide

the experimental basis for the evaluation and optimization of the types and amount of various

lubricators, and reliable data for ensuring fast and safe drilling. The instrument adapts the

technique of variable frequency and uses the newest frequency changer supplied by the Fuji Company

and the import conversion motor. It is characterized by the progressive speed regulation, suitable

structure, high measuring precision, convenient operation and digital display. The instrument has

been applied extensively in various oilfields, research institutions and laboratories.


Model: EP

3. The main technical parameters3. The main technical parameters3. The main technical parameters3. The main technical parameters

The main technical parameters of the instrument are listed in Table 1.

Air supply pipe manifold

Purpose & charactersPurpose & charactersPurpose & charactersPurpose & charactersIt is a kind of output device for air decompression and press regulation.

It can be mainly connectedc with many kinds of drilling liquid analytical instruments manufactured

by our plany. At the same time, adapter connectors can be replaced according to the different needs,

so it can also be used as air delivery for other instrument. The purpose are very wide.

Technical parametersTechnical parametersTechnical parametersTechnical parameters

Artical name Size Input pressureOutput

pressure

Air supply

temperatureRemarks

Low pressure

pipe manifoldDG-1 0-1.6MPa

High pressure

pipe manifoldQG-76 0-7.6MPa

High pressure

pipe manifold QG-80 0-8.0MPa

High pressure

pipe manifoldQG-80A

Maximum working

pressure*1.2-15MPa

0-8.0MPa

-10-+50Oxygen is strictly

prohibited

Drilling problems such as stuck pipe, tight hole, washout, and sloughing can be related to shale stability.

The Capillary Suction Timer (CST) and the Linear Swell Meter (LSM) help determine if specific shales are

likely to cause drilling and completion problems.


15/20


Linear Swell Meter The Linear Swell Meter Model 2000 (LSM) helps determine shale hydration or dehydration by measuring

the increase or decrease in length over time of reconstituted or intact shale core. Together the LSM and

Capillary Suction Time (CST) tests determine the recommended mud system for drilling through a specific

shale formation. First, a CST test is conducted to determine the correct inhibitor for the shale. Then, a

variety of fluids are tested.

Test results are graphed to show the percent of swelling versus swelling time in minutes. The LSM test

demonstrates the inhibitive effects of these various fluids on shale swelling.

Dynamic Linear Swell Meter

Investigating the swelling characteristics of shale formations is vital in selecting a proper drilling fluid to

give maximum inhibition and wellbore stability. While drilling a well, a shale formation will immediately

begin to swell if the drilling fluid is not completely compatible with the formation. This swelling can cause

many problems, such as bit balling, pipe drag, hole sloughing, or other "gumbo" related problems.

Therefore, selecting the proper drilling fluid prior to, or during the drilling operation, can be very beneficial

in achieving a stable wellbore.

The Linear Swell Meter is designed to simultaneously test up to four drilling fluids (expandable to eight) on

a representative shale sample for extended periods of time at temperatures up to 180F.

Most swell meters are designed to test shale samples in static fluid. However, fluids circulate as you drill,

so testing shale samples in a static environment does not always provide accurate readings.

The Linear Swell Meter is the only swell meter on the market capable of dynamically testing your fluids, so

you obtain the most accurate data possible.

Permeability Plugging Apparatus

The Permeability Plugging Apparatus (PPA) is designed to provide accurate simulation and measurement

of down-hole static filtration. This 5,000 psig rated PPA is ideal for predicting how a drilling fluid can form a

permeable filter cake to seal off depleted/under pressure intervals. The PPA utilizes a conventional HTHP

Heating Jacket to simulate reservoir temperature. The fluid cell is inverted, with pressure applied from the

bottom of the cell and filtrate collected out the top. Pressure is transferred to the mud by a small hydraulic

hand pump through a small floating piston within the cell. The PPA employs a ceramic filter disc, which is

available in varying porosities. The disc offers a more authentic representation of the formation.

Permeability Tester

Permeability is a measure of the ability of a fluid to flow through a porous media when subjected to a


16/20


differential pressure and is mathematically equated by Darcys Law.

The primary function of a well cement is to isolate/seal the casing from the well bore. This seal prevents

the migration of fluids into the annulus and upwards to the surface. Therefore, it is imperative that a well

cement exhibit very low permeability.

The permeability of a petroleum reservoir is one of the most influential factors governing the production

capabilities of a producing formation.

k = (2,000 x OP x Q x x L) / (A x (IP2- OP

2))

Where:

The Permeameter is utilized to measure the permeability of cement or core specimens one inch in

diameter and one inch in length. The specimen is placed into a sleeve, which is then inserted into the

"Modified Hassler" style test cell. Nitrogen at a constant flow rate is forced through the core and the

differential pressure across the core is measured. The flowrate is measured with calibrated flowmeters.

Viscosity is easily determined by the use of nitrogen property tables. These variables are incorporated into

Darcys law to calculate cement sample permeability.

Method of Operation:

A specimen is placed into a core sleeve which is then inserted into the "Modified Hassler" style test cell.

Nitrogen is displaced through the specimen at various flowrates to determine the permeability.

Features and Specifications:

"Modified Hassler" cell accommodates 1" diameter cores

Core length is one inch

Instrumentation gauge displays driving pressure

All Hassler components fabricated from 316 Stainless Steel

Nitrogen utilized as test fluid

Unit conforms to API Specification 10 guidelines

Resistivity Meter

The Model DZL2003 resistivity measuring meter of drilling fluids is the newly developed instrument. It is

mainly used to measure resistivity or conductivity of various fluids. It can also be applied to measure resisitivity of

oil field drilling fluids and various liquids in other industries, and analyze liquid mineralization or provide reference

for distinguishing water purity. The instrument is ideal liquid resistivity measuring apparatus and can be widely

used to such departments as petroleum, geology, drilling team and laboratory.

Function


17/20


1) measuring liquid resistivity

2) measuring liquid temperature

3) automatic exchange of resistivity in standard temperature

4) setting of standard temperature

5) auto-compensation of temperature

6) self-check of measuring apparatus

7) with rechargeable cell set

2. Model DZL2003

3. The main technical parameters of apparatus

The main technical parameters of the apparatus are listed in the following table.

Sequence

numberName Technical Parameters

1 Power supply AC220V10%501 Hz

2 Continuous working time

with rechargeable cell30 hours

3 Working environment

temperature1050

4 Measuring range 0.2100m

5

Measuring uncertainty

2.05.0mvariable range in 3%

Others in 5%

6 Measuring temperature range 1050with precision range in 1

7 Setting of standard

temperature1535 with step is 1

8 Compensation of

auto-temperature1010with step is 0.1


18/20


Mix mud machine

(Mud Preparing Apparatus)

The Model ZXP-30L Mud Preparing Apparatus is an instrument used to mix various fluids. It is

mainly used to prepare drilling fluids in petroleum exploration and other fluids. It has been widely

used in the fields of petroleum, geology and metallurgy, etc.


Model: ZXP-30L

3.3.3.3. TheTheTheThe main technical parameters of apparatusmain technical parameters of apparatusmain technical parameters of apparatusmain technical parameters of apparatus

Sequence

numberName Technical specification

1 Rated power supply 220V, 50Hz

2 Agitated power 0.37KW

3 Pump power 0.37KW

4

Rotational speed

(non-load) 1400r/min

5 Volume of agitation 30L

6 Maximum of flow rate 1.8m3/h

7 Outer size 8304301050mm

Concentration of Sulfide Detection

Garrett gas train test

The Concentration of Sulfides Detection Kit(Garrett gas train test) are used for detection the

concentration of soluble sulfide in drilling fluids . the soluble sulfides include hydrogen

sulfides (H2S),the sulfide (S-2) and the bisulfide(HS

-) ion. Utilizing a weak acid in the Garrett

Gas Train,the drilling fluids filtrate liberate H2S gas from the sulfide, and let out with bubbling

an inert gas. The Garrett gas train separates the gas from the liquids, and the gas pass a Draeger

tube that responds to H2S by progressively dardkening along its length as the H2S react with the

reagent. The length of darken is direct ratio with the total concentration of the sulfides in the

filtrate. The low-range Draeger tube is white until H 2S turns it brownish-back. The high-range

Draeger tube is pale blue until H2S turns it jet black. No known common drilling fluid component

or contaminant causes this coloration of the Draeger tubes as does H2S.

A hydrogen sulfide test paper disk can be accommodated in the Garrett gas train for routine tests

until evidence of the presence of H2S is noted by discoloration of the hydrogen sulfide test

paper,then a Draeger tube should be used for quantitative analysis.

Section 2.Model

Model QTH

Section 3. Equipment and ParametersItem No. descriptiondescriptiondescriptiondescription parametersparametersparametersparameters

1

Garret Gas Train chamber 1Garret Gas Train chamber 1Garret Gas Train chamber 1Garret Gas Train chamber 1 Depth 90mm,Diameter 38mmDepth 90mm,Diameter 38mmDepth 90mm,Diameter 38mmDepth 90mm,Diameter 38mm

2 Chamber 2 Depth 90mm,Diameter 30mm

3 Chamber 3 Depth 90mm,Diameter 30mm

4 Passages between chambers Diameter 2mm


19/20


5 Draeger tube,low range Marked H2S 100/a

6 Draeger tube,high range Marked H2S 0.2%/a

Atmospheric Consistometer

Major technical parameters of consistometer

1 AC220V 50HZ 3kW

1. Power: AC220V 50HZ 3kW

2150r.p.m

2. Motor speed: 150r.p.m

3. Digital PID closed loop control and digital display;

4. three-pen recorder for recording temperature and consistency curves

5. working temperature: ambient temperature-100

6. precision of temperature control


20/20


9Volume: 84*74*189cm

10Weight: 300kg

double temperature strength maintenance

chamber

Type SX-0702 normal atmospheric pressure maintenance chamber is designed and manufactured strictly in

accordance with API-10 standard. Under normal atmospheric pressure conditions, it provides maintenance for

cement blocks used for testing strength of oil well cement.

Main technical data

1 Power supply: AC220V10 %50HZ 2*2kW

2Max. Operating Temperature

3Automatic regulating temperature

4Temperature control accuracy

Documents

Catalog of Slurry Testing__ Equipments