CATALOG - MSC Industrial Direct

vehicle

www.BarnesDistribution.com • 866-GET-MROP

CATALOGCLOSE-OUT

Pricing Good While Quantities Last!

Truck-Lite® Replacement Lenses

• Kit includes: Lamp, extension bracket & pigtail• Acrylic Lens• 16 gauge wire

PricePart No. Color Description Unit ea.

KP66328 Red Bulls eye 10 $0.67

Put Barnes BLUE to work for you.SM

Truck-Lite® Super 21 - C/MRectangular


998614 Red Reflective Lens 1 $5.72

• Sonically sealed polycarbonate lens and housing• 15,000 hour rated bulb life

Truck-Lite® Model 10 - C/M - 2-1/2” Round


KP68870 Amber Lamp, Mount 1 $5.40 & Pigtail 12v

• Silvered mirror glass resists pitting, peeling & corrosion• Glass is cushioned in a vinyl ozone resistant gasket• Fits most standard OEM brackets with T-bolt mount• Designed with a single-piece mirror back• Bubble back and rib back designs are popular for use on construction & delivery trucks

7” x 16” West Coast Mirror HeadBubble back

PricePart No. Description Unit ea.

97808 White Finish 1 $16.66

• Kit includes lamp & gray flange• Polycarbonate lens and housing• 16 gauge wire• Designed at .05 amp

Truck-Lite® Model 30 -C/M - 2” Round - LED


30051Y Amber LED 1 $10.84

• Polycarbonate lens and housing• Designed to fit in limited mounting areas• Fits in most narrow header rails• Can be mounted vertically or horizontally• Snap-lock tabs allow quick & easy installation

Truck-Lite® Model 19 -C/M - Rectangular


19002Y3 Amber Gray Mount & 1 $3.33 Hot Wire

www.BarnesDistribution.com • 866-GET-MROP 2 Pricing Good While Quantities Last!

• Polycarbonate lens and housing• Designed at 13.5v, 2.16/.47 amp, 32/2 cp• Shock mount absorbs road shock & vibration• Welded connections eliminate failures caused by arcing

Truck-Lite® Male Pin 40 -S/T/T - 4” Round


49002R Red Lamp & Grommet 1 $7.5849202R3 Red Lamp 1 $5.01

• 10 Diode• Popular replacement for cab marker or corner trailer applications• Standard PL-10 connection

Truck-Lite® C/M - 2” BeehiveLED


998608 Red LED 1 $5.77

• Built-in adjustable convex blind spot mirror• Provides close-in side view• Double strength silvered mirror• 57 sq. in. flat area; 20 sq. in. convex• Grote no. 16041

Split-Focus Box Type Mirror Head


8834 White 1 $29.38

• Large arrow pattern makes it easier for road traffic to identify turning vehicles• Meets FMVSS 108 Front and Rear Turn requirements• Auxiliary for mid-turn and/or wide-turn indications• Surface mount for easy installation• UV-coated lens prevents weathering from the elements• Mounts with #10 screws

Grote Turn Signal - 7” Arrow Lens - LED


998597 Amber Arrow Lens 1 $51.94

• For fender or front bracket mount• Shows yellow to front, red to rear• Wire exit has a grommet to protect the jacket from abrasion• Zinc die-cast/acrylic• Single contact

Thin Line Double Face Lamp


8396 Red & Amber Double Face 1 $15.19 Lamp

• Easy installation• Three, bulb replaceable, -8425-R clearance/marker lamps• 14 1⁄ 2” aluminum bar

Clearance/Marker BarLow profile


8522 Red Bar Lamp 1 $11.07


CATALOG CLOSE-OUT

3Pricing Good While Quantities Last!

• Head diameter: .875• Overall length: .725• Shank length: .600• Shank diameter: .620• Head thickness: .125• Application: Chrysler• Replaces: 8934201493

Jack Nut

Thread Grip Range PricePart No. Size (mm) (mm) Unit ea.

KP83233 8-1.25 .015-.156 25 $ .59

• Largest blind head• Mandrel breaks flush with top of rivet head anywhere within grip range• Fills holes tightly, high clamp-up, water tight capability, fully cored• Material: rivet sleeve - 5056 aluminum mandrel-7075 aluminum• Wax (do not remove) finish

Klamp Tite Rivets

PricePart No. Grip Range (in.) Unit ea.

KP553289 .187-.375 50 $ .26KP553290 .375-.562 50 $ .26KP553292 .187-.375 25 $ .41

• 9” Repair link• Each link is printed and flagged for easy identification• Insulation is rated for 150°C continuous• Delphi’s proprietary insulation compound meets the requirements of SAE J-1128 Type HTS as specified in SAE J-156• Typically, a fusible link should be four gauges smaller than the circuit wire• Example: If the circuit wire is 12 gauge, use a 16 gauge fusible link

Universal Fuseable Links

PricePart No. Description Color Unit ea.

-7540-16 16-ga. - 1.0 mm Black 10 $ .51-7540-18 18-ga. - 0.8 mm Blue 10 $ .48

• 2-18 Gauge wire leads, 8” length• Ford ‘91/

Cam & Crank Shaft Sensors


998131 Repair Harness 1 $2.61

• 3-20 Gauge wire leads, 10” length• Double wedge contact



Stop & TailLamp Pigtail

• 3-18 Gauge wire leads, 8” length• Double contact• Plastic twist lock with offset pins; standard base• For #1157 bulb• Ford ‘74/



Park & Turn Repair Harness

• 2-20 Gauge 8” leads• Replaces: 12141388, 88986416 & LS44

PricePart No. Application Unit ea.


Back-Up License Plate & Side MarkerRepair Harness


• 2-16 Gauge TXL wire leads, 8” length• Grand Marquis, Town Car, Contour & Mystique ‘96/



Alternator Repair Harness

A B C PricePart No. (in.) (in.) (in.) Unit ea.

2083 1/2 2 2 5 $2.952087 1 3⁄ 4 2-7⁄ 8 2-1⁄ 2 10 $2.47

Rim Clamps – “F” Style

Speedometer Cable & Casing

Descrip- Dia. Length PricePart No. tion (in.) (ft.) Unit ea.

2251 Cable .150 100 10 $ 71.782263 Casing .445 100 10 $118.80

• For use on ratio drive units• .445” O.D.• #2263-1 Ferrules & #2263 casing


-2263-2 7⁄ 8-18 thread w/ferrule flange 10 $ .74

Speedometer Cable Repair Fittings

Zinc Side AdaptorTerminal

PricePart No. Cable Size Polarity Unit ea.

TZ1155 Multiple Negative 5 $1.29TZ1150 Multiple Positive 5 $1.29

Zinc Side Terminal Charging Posts

PricePart No. Cable Size Polarity Unit ea.

TZ740 6 - 2/0 Positive 5 $ .80TZ745 6 - 2/0 Negative 5 $ .80

• Contains both the emergency gladhand and air chuck


SFAH60-ASSY 3⁄ 8” x 60’ Rubber 1 $63.64 Hose Assembly

Air Hose Assembly


CATALOG CLOSE-OUT


• 8 oz. Cotton canvas gloves• Knit wrist, wing thumb, off white color• Comfortable and durable• For general purpose and maintenance use

PricePart No. Size Unit ea.

21781 Mens 5 Pair $ .5521781S Small 6 Pair $ .45

Cotton Canvas Gloves

• Industry Applications - For use in material and glass handling operations, in general maintenance, sanitation, and plywood industries• Russet nitrile palm coated• Slip on style with straight thumb• 10 gauge, 100% cotton shell• Natural with red color• Russet nitrile palm cotton interlock lining


24380S Small 12 Pair $1.15

Red Hare® Russet Nitrile Palm Coated

• Industrial grade, ambidextrous nitrile disposable gloves• Resistant to abrasion and light solvents• Comfortable with excellent dexterity• Blue color• Straight cuff, 4-mil thickness• 100 gloves per box• Applications: Auto dealerships, vehicle repair facilities, security services, assembly and parts handling, maintenance

PricePart No. Material Size Unit box

BD6000-1 4-mil Nitrile Small 100/Box $4.27 w/powder

BD Brand Nitrile Disposable Gloves

SAFETY

• Industry Application - For mild protection in automotive plants, material and package handling and bottling industries where improved grip is required.• Knit wrist with straight thumb• Natural Cotton/Polyester blend with black PVC dots

PricePart No. Size Type Unit ea.

MEM9657S Small One Sided 12 Pair $ .37 PVC Dots

String Knit Dotted Gloves

• Constructed of Dyneema® material to provide excellent cut resistance• Exclusive Purple Nitrile coated fingertips for a high level of dexterity and added hand protection• Dotted palm for great grip• Excellent abrasion resistance• Great tear rating• Ambidexterous glove for long lasting wear


BD6043 Small 12 Pair $1.14BD6044 Medium 12 Pair $1.14BD6046 Extra Large 12 Pair $1.11

String Knit Gloves, Latex Palm,

• Grain pigskin leather driving gloves• Keystone thumb, beige color• Pigskin leather withstands moisture without stiffening, making it perfect for wet & dry applications & cold weather situations• Comfortable & durable with excellent abrasion resistance• Applications: industrial, manufacturing, fleet & machinery operation, equipment operation, utility work


BD5010 Small 12 Pair $2.08

BD Brand Leather Drivers Gloves


• Constructed breathable, micro-porous film laminate for protection from non-hazardous liquids• Excellent replacement for Tyvek® brand• Good liquid & particulate barrier• Passes NFPA 99 criteria for antistatic materials


23994 White Kleenguard Aprons 1 box $1.54

KC Kleenguard A40 XP Apron

• Meets or exceeds ANSI Z87.1 standard and CSA Z94.3 standard• Great for assembly & mechanical, chiseling, cleaning, drilling, grinding, machining, power fastening, riveting, and sanding

PricePart No. Frame Lens Unit ea.

AO40301 Clear Clear 1 $5.25

3M™ Centurion™ Safety Impact Goggles

• Industry Application - For added dexterity, comfort and breathability in general purpose applications.• Clute Pattern with knit wrist and straight thumb• Dotted Palm, Index Finger and Thumb• Natural color with Black PVC dots


MEM8802 Ladies 12 Pair $ .47

Cotton Canvas with Dotted Palm Gloves

• Industry Application - For added dexterity, comfort and breathability in general purpose applications.• Clute Pattern with knit wrist and straight thumb• Dotted Palm, Index Finger and Thumb• Natural color with Black PVC dots


8100A Large 1 Pair $ .64

Cotton Canvas Gloveswith PVC Dots

• Industry standard black single dipped• Smooth finish• Interlock lined with knit wrist• Covered fully on the back


MEM6100 Large 12 Pair $ .52

PVC Dipped Gloves

MAINTENANCE & SHOP SUPPLIES


KC73900 Access wall mount dispenser 1 $5.86

WypAll Wall Mount Dispenser


KP82714 spout made of polypropylene 2 $ .53

Funnel, 5-1/2” Pint Capacity, 4” Taper

• Clear lens with antifog coating• Polycarbonate lens material• Frame color clear with elastic strap• Includes wide nasal flare for added comfort and direct venting system to minimize fogging

• Wall mount dispenser for the Brag and Pop Up Boxes• Compact and can be used in almost any location• Designed for high capacity


CATALOG CLOSE-OUT


FASTENERS

• Meets SAE J429 Grade 5• Medium carbon steel• 120,000 PSI minimum tensile strength• Threaded to square (unless otherwise noted)

Dia. Length PricePart No. TPI (in.) Unit ea.

-34622-21/4 3⁄ 8-16 2 1⁄ 4 50 $ .26-34626-51/2 5⁄ 8-11 5 1⁄ 2 25 $1.69

Grade 5 Carriage Bolts, Plain Finish

• UNC• Meets SAE J429 Grade 8• Medium carbon alloy steel• 150,000 PSI minimum tensile strength• 1⁄ 2” diameter is No. 3 Flat Head• 5⁄ 8” through 1 1⁄ 4” diameters are No. 3 Dome Head


C39294 1-8 3 3⁄ 4 5 $2.01

Grade 8 Plow Bolts, Plain Finish

• UNC• Meets SAE J429 Grade 8• Medium carbon alloy steel• 150,000 PSI minimum tensile strength• All diameters are No. 3 Dome Head


37814 1-8 4 10 $2.4237817 1 1⁄ 4-7 4 10 $8.66

Grade 8 Plow Bolts, Zinc Yellow Plating

• UNC and UNF• Alloy steel• Meets SAE Grade 8 requirements• Assortments available: 59286B• Unit: 10

UNF Thread UNC Thread Dia. - TPI x Dia. - TPI x OAL PricePart No. Lgth. (in.) Lgth. (in.) (in.) ea.

CD560522 7⁄16-14 x 3⁄ 4 7⁄16-14 x 1 1⁄ 4 2 1⁄2 $1.08

Grade 8 Double End Studs,Zinc Yellow Plating

• Use with most muffler clamps


CD559292 3⁄ 8-16 2 1⁄ 2 25 $ .13CD559326 3⁄ 8-16 3 25 $ .14CD559047 3⁄ 4-10 4 10 $ .62

Grade 2 Hex Head Cap Screws,Full Thread, Plain Finish

• UNC or UNF• Meets SAE J429 Grade 5 specifications• Medium carbon steel• 20,000 PSI tensile strength minimum for 1⁄ 4” through 1” diameters• 105,000 PSI tensile strength minimum for 1 1⁄ 8” through 1 1⁄ 2” diameters• * by Part No. is full thread• Assortments available: 59033B, 59034B, 59037B through 59045B

Part Dia. Length Price No. Thread TPI (in.) Unit ea.

MP30243 UNF 3⁄ 8-24 5 10 $ .3930269 UNC 3⁄ 8-16 5-1⁄ 2 25 $ .5030244 UNF 3⁄ 8-24 5-1⁄ 2 25 $ .39MP30268 UNF 7/16-20 5 10 $ .53MP30320-4 UNF 5/8-18 4 10 $ .63C80847 UNF 3⁄ 4-16 7 10 $2.65 C83551 UNF 1-14 5 10 $2.78

Grade 5 Hex Head Cap Screws, Zinc Clear Plating, Made in U.S.A.


• UNC or UNF• Meets SAE J429 Grade 8• Medium carbon alloy steel• Through-hardened• 150,000 PSI minimum tensile strength• * by Part No. is full thread• Assortments available: 59000B through 59003B


C703519 UNF 3⁄ 4-16 3 1⁄ 4 25 $ .82

Grade 8 Hex Head Cap Screws,Plain Finish

• Meets ASTM A354 Grade BD and SAE J429 specifications• Medium carbon alloy steel• 150,000 PSI Tensile Strength• 20% higher head (SAE J871)• Assortments available: 59310B, 59312B, 59316B, 59317B


MPKP44167 UNC 1-8 3 1⁄ 2 5 $2.31MPKP45023 UNF 5/16-24 1 1⁄ 2 50 $ .09

Kar-Tite Grade 8 Hex Head Cap Screws,Zinc Clear Plating, Made in U.S.A.

• UNC or UNF• Low carbon steel


38057 6-32 1 1⁄ 2 50 $ .0538069 10-24 1 1⁄ 4 50 $ .02

Phillips Oval Head Machine Screws, Zinc Plating

• UNC (USS) or UNF (SAE)• Low carbon steel• Zinc plated


C85003 8-32 1 1⁄ 2 100 $ .01

Slotted Truss Head Machine Screws, Zinc Plating

• Meets DIN 966• Class 4.8• Low carbon steel• Standard thread• Assortment available: 59239B

Dia. Length PricePart No. & Pitch (mm) Unit ea.

43696 M5 x .80 8 50 $ .02

Metric Phillips Oval Head MachineScrews, Zinc Plating

• Meets DIN 84A• Class 4.8• Low carbon steel• Standard thread• Assortment available: 59241B


C31042 M5 x .80 40 50 $ .05

Metric Slotted Cheese Head MachineScrews, Zinc Plating

• Meets DIN 963• Class 4.8• Standard thread• Assortment available: 59240B


C84640 M6 x 1.00 8 100 $ .03

Metric Slotted Flat Head MachineScrews, Zinc Plating


CATALOG CLOSE-OUT


Part Bore OD Thickness Price No. Size (in.) (in.) (in.) Unit ea.

C313122 3⁄ 8 5⁄ 8 1⁄ 16 2 $13.48

Boston Gear Thrust Washers

• Case hardened steel• Assortment available: 59265B

Dia. Head Length PricePart No. (in.) Size (in.) Unit ea.

C22635 No. 6 No. 6 7⁄ 8 100 $ .02

Phillips Oval Head Sheet Metal Screws, Nickel Plating

• Meets ASTM F835• 160,000 PSI minimum tensile strength• UNC or UNF


C723207 UNF 1⁄ 4-28 5⁄ 8 100 $ .07

Bowmalloy® Button Socket CapScrews, Plain Finish, Made in U.S.A.

• UNC or UNF• Meets ASTM A574• Medium carbon alloy steel• Nylon 11 pellet


-33608-P UNC 1⁄ 4-20 2 25 $2.08-33621-1P UNC 5⁄ 16-18 1 1⁄ 2 25 $ .48

1960 Series Socket Head Cap Screwswith Nylon Pellet, Plain Finish

• UNC or UNF• Medium carbon alloy steel


KP10161 UNC 1⁄ 4-20 1 1⁄ 4 25 $ .12

Socket Low Head Cap Screws,Plain Finish

• Meets ASTM F912• Medium carbon alloy steel


41204 UNC 8-32 3⁄ 8 100 $ .0641209 UNC 1⁄ 4-20 1⁄ 4 100 $ .06

Socket Set Screws, Cone Point,Plain Finish

• UNC or UNF• Meets ASTM F912• Medium carbon alloy steel• Assortments available: 59112B through 59115B


40335 UNC 6-32 7⁄ 8 100 $ .07-40498-1 UNF 7⁄ 8-14 1 10 $2.5348656 ??? 10-32 2 100 $ .30

Socket Set Screws, Cup Point, Plain Finish

• 140,000 PSI minimum tensile strength• Shoulder Screws are sized (Shoulder Dia. x Shoulder Length)

Part Thread Shoulder Shoulder Price No. Size Dia. (in.) lgth.(in.) Unit ea.

C727736 5⁄ 8 - 11 x 7⁄ 8 3⁄ 4 6 10 $15.01

Bowmalloy® Socket Head ShoulderScrews (Stripper Bolts), Plain Finish,Made in U.S.A.


• UNC or UNF• Assortment available: 59235B


92566 No. 12-24 3⁄ 8 50 $ .07

18-8 Stainless Steel Slotted Flat HeadMachine Screws

• UNC or UNF• Meets ASME B.18.3• 302, 304 or XM7 stainless steel• Assortment available: 59130B, 59131B


94484 UNC 3⁄ 4-10 2 1⁄ 4 5 $3.23

18-8 Stainless Steel Socket HeadCap Screws

• UNC or UNF• Meets ASME B18.3• Passivated• Assortment available: 60006B


95631 5⁄ 16-18 2 1⁄ 2 5 $2.1395632 5⁄ 16-18 3 5 $2.51

316 Stainless Steel Button Socket Cap Screws

• Use with socket head cap screws to improve the bearing surface• 1050 spring steel• HRC40-45 hardness

Part Size ID OD Thickness Price No. (in.) (in.) (in.) (in.) Unit ea.

360012 1 1⁄ 4 1.36-1.367 1.852-1.875 .112-.127 10 $ .31

Socket Head Cap Screw Flat Washers,Through-Hardened, Plain Finish

• Low carbon steel• Assortment available: 59215B


KP35008 3⁄ 32 1 3⁄ 4 250 $ .01KP35019 5⁄ 32 1 1⁄ 4 250 $ .01

Cotter Pins, Extended Prong Style, Zinc Plating

• Meets DIN 1481 specifications• AISI 301 Stainless Steel

Dia. Length PricePart No. (mm) (mm) Unit ea.

47668 M10 20 10 $ .91

Metric StainlessSteel Spring Pins

• Solid construction, made to retrofit into existing exit signs• Zero maintenance and easy installation• Innovation concave LED design directs light output where you need it the most in existing exit signs!• Life expectancy: 10 years at full lumen output• ETL Listed, conforms to UL924• Rated Life: Red & Green = 10 years, White = 25 years• Base Type: E12

Part Base OAL Price No. Type (in.) Color Watts Unit ea.

20715RD E12 4.75 Red 1.2 1 $18.6820717GR E12 5.6 Green 0.7 1 $28.5220719WH E12 4.75 White 1.7 1 $43.59

Exit Sign Retrofit Kits

ELECTRICAL


CATALOG CLOSE-OUT


• New Amalgam technology provides cooler operating temperatures for consistent performance in any position• Use indoor or outdoors• UL Listed for wet locations - base up• Color: 2700K• Rated Life: 8,000 hours

Incandescent Part Base MOL Comparison Price No. Type (in.) (Watt) Lumens Unit ea.

1R2014 R20 4.3 50 500 1 $ 8.731R4019 R40 5.9 85 950 1 $10.49

CFL Reflector Floods

• Copper terminal• Maximum material thickness: .040 (except 16-14 is .050)• Meets American Association of Railroads (AAR) specifications• Funnel entry• Insulation grip

Bowma-Crimp® Nylon InsulatedRailroad TerminalsRing Tongue

Wire Insula- Insula- Part Range Stud tion tion Price No. (AWG) Size Type Color Unit ea.

18272 12-10 10 Double Black 50 $ .09 Expanded

• For mounting rigid conduit, IMC and pipe• Steel• Galv-Krom® finish

Nom. Nom. Clamp Rigid Tubing Thickness Part Pipe OD (gauge/ Price No. Size (in.) (in.) in.) Unit ea.

18489 3 1⁄ 2 4 1⁄ 8 1⁄ 8 10 $2.40

Kindorf® Channel Pipe StrapsRigid Conduit, IMC and PipeFor 1-1/2” or 1-5/8” Channel

• Accomodates No.14 through No.10 wire gauge• 2 pole - 3 wire grounding

Nema PricePart No. No. Description Unit ea.

18866 L5-30R Connector 1 $59.27

Locking Blade, 30amp 125volt

Incandescent Part Base MOL Comparison Price No. Type (in.) (Watt) Lumens Unit ea.

1R2014SS E26 4.3 50 500 1 $11.46

Shatter Resistant Coated CFL Flood Light

• Shatter resistant coating provides glass, Mercury, and Phosphor containment• Color: 2700K• Rated Life: Floods = 8,000 hours• Base Type: E26


CATALOG CLOSE-OUT


• Lasts 7 years based on 3 hours use a day• Perfect for most commercial applications utilizing a compatible ballast• Items 32013IST & 32013ISQ have an electronic instant starter for instant-on when used with a magnetic ballast• Use with magnetic or electronic ballasts that have same base configurations• Color: 2700K• Rated Life: 10,000 hours

Incan- descent Com- Part Base MOL parison Price No. Type (in.) (Watt) Lumens Unit ea.

32005G23 G23 4.1 25 250 1 $2.1532007G23 G23 5.3 35 410 1 $2.1532009G23 G23 6.4 40 590 1 $2.1532013IST GX23 6.9 60 800 1 $3.2132013Q GX23-2 5.2 60 810 1 $3.16

Plug-In Lamps (PLs)

• The GU24 base introduces TCP’s superior Springlamp technology with an easy-to-use pin base socket• Energy Star Program requirements for residential lighting fixtures version 4.0 requires that all residential lighting fixtures cannot use the standard Edison Screw Base, even if they do not have a built in ballast. The same requirement is included in the California’s Energy Efficiency Standards for Residential and Nonresidential Buildings - Title 24. The passage of Title 24 spurred other states and countries to research and adopt the same strict energy-efficient guidelines.• Color: 2700K• Rated Life: 10,000 hours for all spirals & 8,000 hours for all quads, R20, R30, & R40’s• Base Type: GU24 Incan- descent Com- Part Base MOL parison Price No. Type (in.) (Watt) Lumens Unit ea.

33118SP GU24 3.8 75 1200 1 $4.0733123SP GU24 4.4 90 1600 1 $4.4933127SP GU24 4.8 100 1850 1 $5.7333113Q GU24 4.5 60 750 1 $3.5133118Q GU24 6.1 75 1150 1 $3.8933126Q GU24 7.1 100 1700 1 $4.66

GU24 Compact Fluorescent Lamps

Incan- descent Com- Part Base MOL parison Price No. Type (in.) (Watt) Lumens Unit ea.

33114R20 GU24 4.6 50 500 1 $5.7333116R30 GU24 4.6 75 750 1 $6.8533123R40 GU24 5.3 120 1200 1 $9.30

PricePart No. Description ea.

611858 Heat Shrink Terminals $504.66

Heat Shrink Terminals Assortment with Rack


933332017 Relay Switch 200 $1.95

Relay Switch

Wire Stud PricePart No. Range Size Unit ea.

C10597-1 16-14 5-6 15 $0.09

Plastic Crimp VinylInsulated Ring Tongue• Electro tin plated• Constructed of electrolytic tough pitch (ETP) copper for maximum conductivity• Full 1/4” barrel• Blue insulation color

• Assortment includes heat shrink terminals, heat shrink tubing, crimpers, mini torch and display rack• 33 items / 1111 pieces

• Hella Inc. no. 933332017• Mini ISO relay with mounting bracket• SPDT/Form C• 12 Volt• 40 amp continuous


CATALOG CLOSE-OUT



ET6204 4-Range Voltage Tester 1 $9.60

SPERRY® 4-Range Voltage TesterTests voltages from 80-480 V AC/DC• Patented, snap-in leads are spaced to fit a standard outlet for easy, “hands-free” testing• Compact ergonomic design• Hi-Vis™ voltage indication• AC/DC Voltage: 80-480 V• Frequency: 60Hz• CAT Rating: II 600V• UL & CUL Listed


MHQ8001 3/4” Hole Plug 25 $1.91MHQ8003 7/8” Hole Plug 25 $1.91

Hole Plug

Price perPart No. Description Color Unit Ft.

MHQ8027 16/2 brn/grn 500 ft. $ .32MHQ8032 18/2 blk/red 500 ft. $ .17MHQ8033 18/2 blk/wht 500 ft. $ .20MHQ8036 18/2 brown .182’ 250 ft. $ .24

Bonded Parallel Wire

Wire Price perPart No. Gauge Color Unit Ft.

MHQ8060 18 Blue 500 ft. $ .10MHQ8061 18 Green 500 ft. $ .10MHQ8063 18 Yellow 500 ft. $ .10

Cross Link PolyethyleneWire

PricePart No. Description Color Unit ea.

MHQ8065 3 BLD Blue 1 $2.21

SPST Blue Rocker Switch

TOOLS & ABRASIVES

• Manufactured from M35 Grade HSS Cobalt for high heat and abrasion resistance• Longest cutting edge life• Radial concave flute for the greatest control of true, round holes and minimal vibration• Three flats on the shank to avoid slipping in the chuck• Designed with a Speedpoint Tip for fast start – 6 times faster than traditional Unibit• Ideal for drilling holes in thin materials such as mild steel, copper, brass, aluminum and stainless steel• Laser marked sizes on each Unibit for easy identification• Blue marking collar so its easy to identify Cobalt Unibit from standard Unibits• Applications: Electrical panels, wiring, knockouts, security system installation, metal fabrication, dashboard wiring, instrument installation, custom fabricating

Incre- No. Part ments of Size Unibit Price No. (in.) holes Range No. Unit ea.

998718 1mm 9 4-12mm 1M 1 $30.24998719 2mm 5 4-12mm 2M 1 $30.24998720 2mm 9 6-18mm 3M 1 $54.09998721 2mm 10 4-22mm 4M 1 $63.81

Cobalt Unibits• Rubber hole plugs hide holes left by antennas

• Meets SAE J1128 spec• Multi-conductor trailer wire• PVC polyvinyl chlodride• 176°F (80°C)• Designed for use with auto, RV’s, trucks, buses and boat trailers

• Automotive cross link wire for use in high temp areas• Resistant to gas, moisture, grease• Temp rating -59°F to 257°F (-51°C to 125°C)• SAE J1128 GXL

• Illuminated DC rocker switch• Compatible with any auto and marine switch panel• 20A/12V DC


PricePart No. Size (in.) Unit ea.

998722 ProPlier Kitbag Set - Set of 1 $59.22 5 includes: 10” Groovelock Pliers, 10” Adjustable Wrench, 8” Lineman’s, 6” Diagonal Cutter and 6” Slip Joint pliers

• Adjust 50% faster than traditional groove joint pliers• Press-N-Slide button adjusts jaw• Multi-Groove Ratcheting System - allows for precise positioning• Twice the groove positions of traditional groove joint pliers• Patented technology Metal Injection Molding• Precision parts deliver strength and exceptional performance• ProTouch Grips with Anti-Pinch design• Molded handles for comfort and less fatigue

Irwin® Groovelock Pliers

• Strength and durability of traditional vice grips with the performance advantage of a release that is 2X easier to open with one hand• Unlocks from any angle without needing to press a trigger, making it ideal for professional work in tight places• Offers more finger room to accommodate large hands or hands wearing gloves• Adjusting screw provides exacting pressure and maintains pressure for repetitive use• Made of high grade alloy steel and heat treated for maximum strength• Designed to grip from any angle

Irwin® Vice Grip FastRelease Locking Pliers

Size PricePart No. Description (in.) Unit ea.

998174 Fast Release Locking 10” curved 1 $32.01 Pliers, Set, 2 pc. & 6” long nose

PricePart No. Size (in.) Unit ea.

B10371 5 1⁄ 4 1 $15.05

• Induction hardened cutting edge that satays sharp longer• Machined jaws for maximum gripping power• Nickel chromium steel construction for overall strength and durability• ProTouch™ grip for comfort and spring loaded for easy gripping and reduced hand fatigue• High leverage for greater force at the jaw• Jaw length: 15⁄ 16”; Jaw Width: 3/12”

Irwin® Long Nose Pliers with Spring & Cutter

Jaw Ad- Jaw Size justment Thick PricePart No. (in.) (in.) (in.) Unit ea.

20379-2 4 15⁄ 16 7⁄ 32 1 $10.37

• Each tool is heat treated for maximum toughness and durability• Controlled power means a simple hand squeeze can put one ton of pressure between the jaws• Wire cutter handles up to a 1⁄ 4” bolt

Locking Pliers – Wire Cutter


20376-1 7 1 1⁄ 8 1⁄ 2 1 $11.52

• Manufactured of the highest grade alloy tool steels• Tool locks to the work leaving both hands free. Powerful jaws and teeth hold tight; won’t slip• Heavy duty jaws grip work of all shapes

Locking Pliers with Straight Jaw


CATALOG CLOSE-OUT


• Long reach design delivers high leverage while keeping hand away from hot surfaces and dangerous areas• Ergonomic grip handle

Long Reach Pliers


KP39369 Bent Jaws 11 3⁄ 8 1 $43.52

• Five-inch length• Chrome vanadium-molybdenum steel; hardened and tempered• Deep sockets to clear long bolts• Tough plastic handle is molded to the blade for permanent bonding; oil and gas resistant

T-Handle Nutdriver Set - 6 Pc.


20303 One each: 3⁄ 16”, 1⁄ 4”, 1 set $41.45 5⁄ 16”, 3⁄ 8”, 7⁄ 16”, 1⁄ 2”

• 13-piece set• Contains one each of the following sizes: .050”, 1⁄ 16”, 5⁄ 64”, 3⁄ 32”, 7⁄ 64”, 1⁄ 8”, 9⁄ 64”, 5⁄ 32”, 3⁄ 16”, 7⁄ 32”, 1⁄ 4”, 5⁄ 16”, 3⁄ 8”

Balldriver Hex Tool Set


32377 Balldriver® Hex Tool Set 1 $33.88


20378 9 2 7⁄ 8 at tip 3⁄ 16 at tip 1 $15.36 1 5⁄ 16 at base 13⁄ 32 at base

• Easy release trigger snaps jaws open instantly, ready for the next job• Same wire cutting power as our curved-jaw tool• Tapered nose ideal for delicate work, tight spaces, clamping of small parts

Locking Pliers – Long Nose

• Drop forged from high-grade tool steel• Cutters induction hardened (approx. 60 HRC)• Chrome-nickel plated; mirror polished• Red/yellow ergonomic comfort grip with slip guard• Beveled nose for soft and hard wire• Long cutter for flat and round cable• Insulation according to VDE 0682/part 201, DIN EN 60900, IEC 900, ASTM F-1505-94• Individually tested to 10,000 volts and certified to 1000 volt AC or 1500 volt DC

Insulated Combination Pliers


21265 7” Insulated Combination Pliers 1 $37.16

• Extra long spring loaded handles allow greater access to confined work space• Comfort grip handles• Quality alloy steel• Mini lineman’s pliers have serrated jaws for a sure grip

Long Reach Pliers


KP87707 6-1/2” Mini Lineman w/cutter 1 $10.35KP87704 5-3/4” Diagonal Cutter 1 $10.32

• High-quality tool steel• Hardened and tempered• Contains: three slotted blades 1⁄ 8, 3⁄ 16, 1⁄ 4; one phillips drive No. 1; one torx drive T15; one point awl 3⁄ 16”

General Purpose Folding Set


19500 Fold Uni-Drive 6 in 1 1 $5.91


• Combines the versatility of adjustable wrenches with the precision and consistency of open-end wrenches• Features a sliding lever for quick adjustments• Parallel jaws with smooth surfaces grip securely and help prevent scratches to materials• Grooved internal jaw manually slides forward for quick, one hand sizing• Keeps jaw locked in place for leverage and repeated use• Precise scale markings size nut and bolt diameters easily • ProTouch grips, molded handles for comfort and less hand fatigue• Hang hole for easy storage

Vice Grip ProPliers Adjustable Wrenches


998177 Adjustable Wrench 8 1 $11.76

CAUTION: Improper speeds and/or feeds may cause cutting tools to shat-ter. Always wear safety glasses when using cutting tools.

• Constructed of large nylon filament• Utilizes coarse silicon carbide grain• Replaces the need for wire wheels• Applications: Cleaning welds, removing rust andscaling, removing paints, varnishes and sealantsfrom difficult to reach surfaces, blending, rapidremoval of surface contaminants

Coating Removal System


840497 SocAtt Quick- 3 10 $4.96 Change Disc

• Used with Vise Grip locking pliers to convert them to a portable vise• Attaches to work benches, sawhorses, tailgates, etc. up to 2” thick• Essentially provides a third hand for gluing, drilling, welding, filing, etc.• Pliers not included but sold separately

Grip Holder


KP10038 Vise-Grip Holder 1 $11.84

• High carbon steel construction• Chisel end beveled• Claw and chisel end polished; claw slotted

Wrecking Bar


45567 24” 3 1⁄ 2 lbs. 1 $3.64


CATALOG CLOSE-OUT


• The only lubricating wipe on the market• Patented non-toxic lubricating solution is powerful enough to clean rust from tools but safe enough for use in sensitive areas such as food preparation, schools and hospitals• 7” x 12” thick disposable cloth wipe will not rip or tear, requiring fewer wipes for complete lubrication applications• Use Simply Soy Wipes to prevent and remove rust from metal surfaces• Great for lubricating chains and wire cable systems, plungers on facility doors, metal slides and rubber weather-stripping around glass and metal• Superior at cleaning and lubricating rubber belts, tires and parts• 0% VOC, no carcinogens, 100% biodegradable and non-toxic• Available in two convenient sizes: BET-0006 has 12 individual foil-pack wipes per box; unit = 12 boxes• BET-0020 has 24 wipes per canister; unit = 12 canisters per box• Not for sale in Canada

Nutek Simply Soy Wipes

PricePart No. Contents Unit ea.

BET-0006-1 Foil packed wipes, 12/box 1 $11.06BET-0020-1 24 count canister 1 $9.52

• A Smart Green earth-friendly soy-based product for heavy duty jobs• Formulated for superior lubricity with no dust collecting residue• Withstands varied environmental climates with superior lubricity and anti-corrosion protection• Safe on metal, rubber, wood, glass, vinyl, paper, plastics not under stress, leather and most paint (test first)• Use on open gears, bearings, conveyors, windows, slides, swivel joints, sliding doors, hinges and chains• Provides a long-lasting, dry lubricating film with no oily residue• Less than 50% VOC, Compliant for all 50 states• Not for sale in Canada

Nutek Shield It


BET-0003-1 10 oz. aerosol, 1 $4.68 7 oz. net wt.

• A Smart Green earth-friendly lubricant that cleans and protects sticky surfaces and loosens rusted parts without the use of Teflon or silicone• Contains green solvents made from soy• Formulation has the staying power to outlast heavy usage on hinges, overhead door systems and exterior doors• A light spray on metal tools will prevent rust and corrosion• Apply as needed to metal surfaces and mechanisms such as unenergized electrical motors and industrial machines, slides, locks and casters• Less than 50% VOC and compliant for all 50 states• Use anywhere there are squeaks and creaks• Not for sale in Canada

Nutek LubFix


BET-0001-1 10 oz. aerosol, 1 $4.68 8 oz. net wt.

• H1 Registered (NSF # 130625) for incidental food contact• White, non-curing silicone gel compounds seals, lubricates, protects and insulates• Waterproofs electrical connections and components• Improves electrical performance in adverse weather conditions• Excellent for lubricating and sealing rubber and plastic parts• Piston can allows for precise application of product• FDA CFR 21-175.300, FDA CFR 21-178.3570• Applications: Gaskets, transfer and conveyor belts, motors, plant machinery and handling equipment, rubber moldings, high temperature, low load or high rpm slides, rollers, wheels, gears, chains and hoists• Not for sale in Canada

CRC® Food Grade Lubricant & Sealant


03085-1 6 oz. pressurized 1 $12.54 can; 3.3 oz. net wt.

CHEMICALS


• Green Carpet formulation is a powerful nanodispersion that pierces chemicals bonds to remove unwanted residues to carpet, upholstery and fabrics, restoring their original clean condition• Eliminates the dirt, grime and stains in the carpets and upholstery of building facilities and vehicles • Leaves no sticky residue commonly associated with other carpet cleaners• Green Carpet removes the dirt and stains that other cleaners can’t, over 95% of the most common stains in carpets and upholstery listed by The Carpet & Rug Institute• Available in both Aerosol and Cloth Wipes• Safe for humans, pets and the environment• Green Carpet wipe is a 7” x 12” thick disposable cloth wipe that will not rip or tear, requiring fewer wipes for complete cleaning applications• Zero VOCs, chlorine-free, non-flammable, nonreactive, non-corrosive, non carcinogens, noncaustic, non-toxic and biodegradable• BET-0040 has 12 individual foil-pack wipes per box; unit = 12 boxes• Not for sale in Canada

Nutek Green Carpet


BET-0040-1 Foil packed wipes, 1 $11.06 12 / Box

• Lubricant, penetrant, moisture displacer, metal protectant• Microscopic moisture displacers force out water droplets that cause corrosion; long service life• Non-conductive formula won’t cause short circuits in electrical applications; minimizes downtime• Heavy-duty rust inhibitors prevent rust from forming• Special penetrating agents dig deep into the molecular structure of corrosion to free rusted parts• Capillary action formula climbs up threads and into rusted areas• High lubricity factor minimizes friction, reduces wear to equipment, increases service life• Rubber restoring chemistry rejuvenates seals, o-rings and other rubber parts• Not for sale or use in California, OTC or LADCO states

4-Way CRX Lubricant


BD1102 4-way CRX lubricant, 1 gal 1 $10.92BD1103 4-way CRX lubricant, 5 gal 1 $35.30

• High quality Silyl Modified Polymer (SMP) especially developed for bonding windscreens• Provides rapid and efficient way to fasten many different types of materials especially when objects must be moved immediately after installation• Immediately after installation the product has a high green strength or high internal strength resulting in a very heavy paste with extremely good slump resistance• Reaction starts with moisture and results in irreversible vulcanized adhesive• Adheres well without primer on glass• Solvent, isocyanates and PVC free• Neutral and odorless curing• Low volume shrinkage• Low electrical conductivity• Very good UV resistance and aging properties• Permanently elastic within temperatures from -40 to 248 degrees F (-40 to 120 degrees C)• Applications: Bonding windscreens• Apply Cartridge with Gun part no. C29811; Apply with Sausage pack gun, part no. C29810

Bostik 70-08A Windshield Bonding

PricePart No. Color Contents Unit ea.

BOSA61413-1 Black 13.5 oz. (400 1 $12.22 ml.) sausage pack


CATALOG CLOSE-OUT


• One component, high quality SMP adhesive sealant• Designed for making elastic construction joints that require high strength• Good adhesion on a variety of substrates without the use of a primer• Permanently elastic within temperatures from -40 to 248 degrees F (-40 to 120 degrees C)• Neutral, odorless and fast curing• Paint compatible with most industrial paint or lacquer; testing is recommended first• Very good UV resistance and aging properties• Solvent, isocyanates and PVC free• Work/Tool Life: Less than 30 minutes; Skin Formation: 10 minutes; Cure Rate: 24 hours• Adheres well to aluminum, stainless steel, galvanized steel, zinc, copper, brass, powder coated metal, most lacquered metal surfaces, glass, PVC, polyester (GRP & FRP), painted and lacquered wood• Typical applications: Bonding and sealing roofs, sunroof systems, corner profiles of aluminum or polyester, metal frames, floor systems and welded seams• Waterproofing exterior lap and rivet seams, sealing of aluminum, steel, roof rails, sidewall seams, bonds and seal joints constructed of pre-painted aluminum or metal, gap filling, corrosion prevention for rivet heads• For bonding and sealing in the Transportation market - trucks, trailers, buses, train and RVs construction• Apply with Sausage pack gun, part no. C29810

Bostik 70-03A Panel Repair


BOSA62314-1 White 13.5 oz. (400 1 $10.50 ml.) sausage pack

• One component, high quality SMP adhesive sealant• Developed for bonding windscreens and windows under hot and humid conditions• Provides a rapid and efficient method to fasten many different materials for railway vehicles, coach works and mobile units• High green strength/ high internal strength and very good workability• Neutral, odorless and fast curing• Very good UV resistance and aging properties• Solvent, isocyanates and PVC free• Low volume shrinkage during curing• Low electrical conductivity• Work/Tool Life: Less than 45 minutes; Cure Rate: 24 hours• Typical applications: Elastic bondings of windows in bus, caravan, train and truck construction• Apply with Sausage pack gun, part no. C29810

Bostik 70-11 Panel Repair


BOSISR70-11KF-1 Black 13.5 oz. (400 1 $11.39 ml.) sausage pack


• Construction: synthetic rubber tube, four spirals of high tensile steel wire reinforcement, and an oil, weather, and abrasion resistant synthetic MSHA accepted rubber cover.• Application: very high pressure service hose for use with petroleum based hydraulic fluids and lubricating oils, water, water/glycol, water emulsion hydraulic fluids, and air. For air applications above 250 psi (1.7 MPa), cover should be pin pricked.• Temperature range: -40°F to 257°F (-40° to 125°C) general applications, -40°F to 185°F (-40°C to 85°C) for applications using water, water/glycol or water emulsion hydraulic fluids, -40°F to 158°F (-40° to 70°C) for air applications.• All unit qty: 1

Parker 721ST Hose, Four Wire Spiral, SAE 100R12 / ISO 3862-1 Type R12 / EN 856 Type R12, Super Tough Cover

Parker Hose Hose PricePart No. No. ID (in.) OD (in.) ea.

721ST-8 721ST-8 1⁄ 2 .94 $1,631.14721ST-8-BX 71ST-8 1⁄ 2 .94 $ 541.67721ST-12 721ST-12 3⁄ 4 1.21 $2,114.78721ST-12-BX 721ST-12 3⁄ 4 1.21 $ 763.58721ST-16 721ST-16 1 1.50 $2,289.98721ST-16-BX 721ST-16-BX 1 1.50 $ 916.69721ST-20 721ST-20 1 1⁄ 4 1.84 $4,491.41721ST-20-BX 721ST-20-BX 1 1⁄ 4 1.84 $1,545.57

Fittings: Parker 71 Series Crimp Style

max. work- min. burst Min. Bend Feet ing press. press. Radius PerPart No. (psi) (psi) (in.) Roll

721ST-8 4,000 16,000 3 1⁄ 2 150721ST-8-BX 4,000 16,000 3 1⁄ 2 50721ST-12 4,000 16,000 4 3⁄ 4 150721ST-12-BX 4,000 16,000 4 3⁄ 4 50721ST-16 4,000 16,000 6 150721ST-16-BX 4,000 16,000 6 50721ST-20 3,000 12,000 8 1⁄ 4 150721ST-20-BX 3,000 12,000 6 50

• Construction: synthetic rubber tube, four spirals of high tensile steel wire reinforcement, and an oil, weather, and abrasion resistant synthetic MSHA accepted rubber cover.• Application: very high pressure service hose for use with petroleum based hydraulic fluids and lubricating oils, water, water/glycol, water emulsion hydraulic fluids, and air. For air applications above 250 psi (1.7 MPa), cover should be pin pricked.• Temperature range: -40°F to 257°F (-40°C to 125°C) general applications, -40°F to 185°F (-40°C to 85°C) for applications using water, water/glycol or water emulsion hydraulic fluids, -40°F to 158°F (-40°C to 70°C) for air applications.• All unit qty: 1

Parker 721TC Hose, Four Wire Spiral,SAE 100R12 / ISO 3862-1 Type R12 / EN856 Type R12, Tough Cover

Parker Hose Hose PricePart No. No. ID (in.) OD (in.) ea.

721TC-8-RL 721TC-8 1⁄ 2 .93 $1,094.47721TC-12 721TC-12 3⁄ 4 1.21 $1,507.97721TC-12-BX 721TC-12 3⁄ 4 1.5 $ 545.56721TC-16 721TC-16 1 1.5 $1,755.85721TC-16-BX 721TC-16 1 1.50 $ 655.99721TC-20 721TC-20 1 1⁄ 4 1.84 $3,101.24721TC-20-BX 721TC-20 1 1⁄ 4 1.84 $1,241.30

Fittings: Parker 71 Series Crimp Style

max. work- min. burst Min. Bend Feet ing press. press. Radius PerPart No. (psi) (psi) (in.) Roll

721TC-8-RL 4,000 16,000 3 1⁄ 2 150721TC-12 4,000 16,000 4 3⁄ 4 150721TC-12-BX 4,000 16,000 4 3⁄ 4 50721TC-16 4,000 16,000 6 150721TC-16-BX 4,000 16,000 6 50721TC-20 3,000 12,000 8 1⁄ 4 150721TC-20-BX 3,000 12,000 8 1⁄ 4 50

FLUID CONNECTORS

-Better Abrasion Resistance Performance For Parker’s 100R12 Light Spiral Hoses-Half SAE Minimum Bend Radius Specification

-Best abrasion resistance performance for Parker’s 100R12 light spiral hoses-Half SAE minimum bend radius specification

Documents

CATALOG - MSC Industrial Direct