SYSTEMS FOR LOADING/UNLOADING GOODS

装货/卸货系统

标准型设备：设计并生产来保障装卸货的安全性及避免热损失。此项系统包含3部分:将货物运从货车运至仓库的液压升降平台;手动/电动关闭的滑升门；覆盖和连接车位与仓库的门罩。

Standard equipment, designed and manufactured to guarantee safety during loading/unloading operations and avoid expensive thermal dispersion.“The system consists of three parts: the electrohy-draulic dock leveller to move the goods back and forth from vehicle to warehouse; the manual/electric sectional door for closing; the dock shelter which is used to cover and connect the rear part of the vehi-cle to the warehouse.

装货/卸货系统LOADING/UNLOADING SYSTEMS FOR GOODS

02

装货/卸货系统LOADING/UNLOADING SYSTEMS FOR GOODS

03

门罩

DOCKSHELTER

滑升门

SECTIONALDOOR

装卸平台

DOCKLEVELLER

RAL 7035

RAL 9002

RAL 7016

RAL 7016

带有摆动小板的液压装卸平台ELECTRO-HYDRAULIC DOCK LEVELLERSWITH SWINGING LIP

这是应用最广泛的平台型号，标准型，有以下几种尺寸：

This is the most widely used model of platform, and is produced in standard forms, in several sizes summa-rized as follows.

04

A (宽度) width 1.800 ÷ 2.200 mmB (长度) length 2.000 ÷ 4.000 mmH (高度) height 550 ÷ 800 mmL (小板长度) lip length 400 mm(正负偏移) pos./neg. excursion ÷12,5 %

A

B

H L

KRLI

带有伸缩板的液压装卸平台ELECTRO-HYDRAULIC DOCK LEVELLERSWITH TELESCOPIC LIP

这是应用最广泛的平台型号，标准型，有以下几种尺寸

This is the most widely used model of platform, and is produced in standard forms, in several sizes sum-marized as follows.

05

A (宽度) width 2.000 ÷ 2.200 mmB (长度) length 2.500 ÷ 3.000 mmH (高度) height 600 ÷ 850 mmL (小板长度) lip length 500 mm (1.000)(正负偏移) pos./neg. excursion ÷12,5 %

A

B

H L

KRLT

装卸平台用来调整运输车辆与仓库月台之间的高度 差， 起到桥梁作用。制造材料坚固结实，能满足不同负载，符合EC标准。

Dock Levellers are designed and manufactured with the aim to create a movable bridge between the load- ing/unloading area and the surface of a vehicle, level- ling out differences in height.Materail used for manufacturing is robust having to bear considerable weights and is in conformance to EC stand-ards.

装货/卸货平台LOADING/UNLOADING DOCK LEVELLERS

06

KRP I/T 边缘框架 (第9页)

KRP I/T Profile frame (page 9)

KRA I/T 嵌入式（第8页）

KRA I/T Frame for embedded version (page 8)

07

装货/卸货平台框架结构LOADING/UNLOADINGDOCK LEVELLERS FRAMES

08 KRA-I / KRA-T

安装程序INSTALLATION PROCEDURE

该卸货平台的安装方式是直接安装在已做好的地坑中

This system allows to make a pit for the ramp in an in-dependent way without separate frames.

1 浇注混凝土坑位，并在准确位置预埋L型角铁

1 First prepare the pit in concrete with a bottom and side walls, then make a final layer of the floor providing ‘L’ protective steel profiles around the edges of the pit.

2 将卸货平台放入坑位，通过膨胀螺栓以及焊接将平台与坑位紧密相接

2 Position the ramp which will be fixed to thebottom of the pit and welded to the rear steelprofiles.

带嵌入式框架的卸货平台安装步骤

EMBEDDED FRAME FOR RAMP

1

2

09KRP-I / KRP-T

安装程序INSTALLATION PROCEDURE

与传统的地坑设置方式相比，这种卸货平台的安装方式更为节省时间和材料。

This system allows to save both time and material normally needed to create a pit in a traditional way.

1 准备混凝土基础

1 First prepare the base in concrete.

2 将模具嵌入地坑安装

2 Position the mould on the base and fix it.

3 准备做地坑的最终表面做处理

3 Provide for filling around the mould then for fi-nal floor layer.

4 将卸货平台放入地坑并加固

4 Fit the platform into the mould and providefor necessary connections.

无嵌入式框架的卸货平台安装步骤

NOT EMBEDDED FRAME FOR RAMP

1

2

3

10

智能方案INTELLIGENT SOLUTIONS

KPSIN 标准提升KPSIN standard opening

门板：白色/灰色结构：单导轨附件：双视窗

Panels: white/greyStructure: one rail

特点CHARACTERISTICS

KPSIV 垂直提升KPSIV vertical opening

门板：白/灰结构：双导轨附件：单视窗

Panels: white/greyStructure: two rails

特点CHARACTERISTICS

KPSIS 半垂直提升KPSIS half-vertical opening

门板：白/灰结构：单导轨附件：四视窗

Panels: white/greyStructure: one rail

特点CHARACTERISTICS

KPSIR 低空间提升KPSIR lowered opening

h=450÷530 mm

h≥600 mm

h≥H+400 mm

h≥300 mm

门板：白色/灰色结构：单导轨附件：双视窗

Panels: white/greyStructure: one rail

特点CHARACTERISTICS

11

12

新标准视线板：Kopron独家设计的航空视窗 New standard vision panel: Airplane Style exclusive by Kopron

防盗视板

Burglar-proof vision panel

压铸铝制提手- Kopron独家设计 Lifting handle made in die-cast aluminium - An exclusive design by Kopron

可选配件OPTIONAL ACCESSORIES

开/关遥控器Opening/closingremote controller

操作配件和安全设备的电控箱Control panel for operatingaccessories and safetydevices

门开启时的闪光安全装置Safety flasher during dooropening

一相或三相电机,可直接用于齿轮轴和皮带传送Single-phase or three-phasemotors which can be applieddirectly on the shaft and bybelt transmission

开/关/停止按钮和安全钥匙选择器Open/close/stop panelbuttons and safety keyselector

安全光电池Safety photocells

内部附加号码Adhesive internal number

13

整体计划INTEgRATED PLANNINg

我们根据客户要求提供高技术含量，高性能表现，低成本的物流解决方案。多年的国际市场经验使我们拥有了专业的设计团队，可满足含有尖端科技产品的特殊需求。

Technology, performance and money saving are three ‘musts’ Customers require of a product from Kopron. Years of experience on international markets have brought life to a highly professional team of designers which are able to meet specific requirements regarding this unique product of cutting-edge technology.

半标准组装工业门/ SEMI-STANDARD SECTIONAL INDUSTRIAL DOORS

白 - White RAL 9016

内 - INSIDE

深棕色 - Brown simil RAL 8014

蓝 - Blue RAL 5010

红 - Red RAL 3000

绿 - Green RAL 6005

外 - OUTSIDE

白 - White RAL 9016

银灰 - Silver grey RAL 9006

无烟煤灰色 - Anthracite RAL 7016

白/ 灰 - White/grey RAL 9002

外 - OUTSIDE

标准组装工业门 /STANDARD SECTIONAL INDUSTRIAL DOORS

按要求上RAL漆/RAL PAINT UPON REqUEST

可选COLOURS

灰 - Grey RAL 7035

无烟煤灰色 - Anthracite RAL 7016

标准卸货场所STANDARD DOCK SHELTER边缘PVC面料：灰/ 银 - PERIMETRICAL PVC FABRIC

前瓣装置：无烟煤 - SET OF FRONT FLAPS

当车辆从月台装卸时，门罩会覆盖住车辆。坚固的支撑镀锌钢结构能承受由操作失误造成的冲击力，外层覆盖耐磨防火的PVC材料。前板可根据用途和尺寸大小选用不同材质。

Dock shelters cover the vehicle when loading from the platform.They consist in strong carrying frames, designed to absorb crashes due to wrong manoeuvres and are covered with sheets in robust, fire retardant polyes-ter/ PVC.The front flaps can be supplied in different material ac-cording to their use and to the size of the door.

门罩DOCK SHELTERS

14

高浦龙推出的几种型号（落地式、悬挂式、充气式、旋转式、固定或可调节的枕式门罩）可选择最佳方案。

The several models Kopron propose (ground or raised dock shelters, inflata-ble or rotative ones, with eihter fixed or adjustable cushions) allow to chose the best solution.

15

门罩型号DOCK SHELTERS -MODELS

KDR 标准悬挂式门罩KDR Standard raised dock shelters

KDHR 卸货房KDHR dock house

KDTR隧道式门罩KDTR dock tunnel

此型号门罩有两种配置，可避免仓库和室外空气交换的热损失，提高人体舒适度并节省能源。基本型KDR S可满足不同场合需求、经济高效。伸缩型KDR P满足客户不同需求（非标准装载空间，特殊建筑结构等）。此外，有多款颜色可选，以搭配不密封环境。

This model is proposed in two different configurations and is ideal to avoid heat exchange between the inside of the warehouse and the outside, besidesimproving comfort of personnel and saving energy.Basic model KDR S, is designed to satisfy general requirements and com-bines excellent functionality with contained costs.The pantograph model KDR P can be built according to Customer’s specificneeds (like suiting non-standard loading spaces or particular architectural structures) and may be supplied in different colours to match with the archi-tectural environment.

悬挂式门罩RAISED DOCK SHELTERS

16 KDR

隧道式门罩与KDR有相似的功能，隧道式门罩为库房和货车之前的搭接提供便利。隧道式门罩虽然与KDR型号尺寸一致（高、宽相同），但与月台之间保持一定进深。另外还有坡度型，手动倾斜型等特殊产品。

The dock tunnel for loading bays has the same function as the previously illus-trated KDR dock shelters, but are designed for directly connecting the ware-house to the vehicle in the presence of a loading bay which stretches out be-yond the building. This dock tunnel although keeping same frontal sizes (in height and width) as the KDR Model, may be longher by stretching out to tin-corporate the dock leveller.There are also special models available for angle docks or with manual rampsbuilt onto the edge of the dock itself.

隧道式门罩DOCK TUNNEL

17KDTR

装卸货房DOCK HOUSE

18 KDHR

该系列的产品是用于在普通月台不具备开挖地坑的情况下，直接与月台连接，卸货房的主体结构均为镀锌钢架，可以由保温墙板或者PVC材料包裹，在运输和装卸货过程中起到良好的保温和密封效果。

This model is used to cover and seal loading doors, and is positioned over an existing loading bay in cement or steel.It consist of a hot galvanized steel frame covered by sandwich panels with a length that provides covering the rear part of the lorries during loading/unloa-ding operations.

引导设备

EASY-LINE GUIDES

交通信号灯

TRAFFIC LIGHTS电控箱柱

CONTROL PANEL SUPPORTING POST

装卸平台门连接感应器

DOCK LEVELLER-DOOR CONNECTING SENSOR

配件ACCESSORIES

电缆箱

CABLE CASING

19

标准型//强化型橡胶缓冲器

STANDARD AND MAXI SIZE RUBBER BUMPERS

可滑动强化型橡胶缓冲器

SLIDING MAXI SIZE RUBBER BUMPERS

特殊镀锌处理

SPECIAL GALVANIZED TREATMENT

DOCK

CH-

UK01

/201

7 -

web

OUR GOALS IN ALL FIELDS

2004-2010 2011-20132005-2013 2010-2013 2011-2012 2011-20122000-2012

Technical Partner

2012-2015 2012-20132012-2014 2015-20162013-2014 2015-20162013-2014

LOGISTICSOLUTIONS

Quality Management System: UNI EN ISO 9001: 2008 CertifiedFactory Production Control: UNI EN ISO 1090-1

NTC: DM 14.01.08 - Steel Processing Center n° 2533/13Applicable Standard: UNI EN 13241-1 - UNI EN 3834-2

证书CERTIFICATIONS

高浦龙的产品质量管理体系认证 进一步为产品有效性和 高效性提供了保证。

Through certification Kopron offer a further guarantee on efficiency and quality of their products.