Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
InductorsProducts Catalog
2020
g
2020.3
PCC-M0530M/M0540M M0630M/M0645M M0754M/M0750M M0854M/M0850M M1054M/M1050M M1050ML/M1060ML (MC)
PCC-M0854MS/M1050MS (MC)
PCC-M1280MF (MC) ETQ P8M□□□JFA PCC-M0530M-LP/M0630M-LP ETQ P3M□□□KV□ M0840M-LP/M1040M-LP (MC) ETQ P4M□□□KV□ PCC-M0648M-LE ETQ P4M□□□KFN
M0748M-LE (MC) ETQ P4M□□□KFM PCC-M0530M-H M0630M-H (MC) PCC-D1413H (DUST) ETQ PDH240DTV Soldering Conditions (Power Choke Coils (Automotive Grade)) Safety Precautions (Common precautions for Power Choke Coils (Automotive Grade)) PCC-M0730L (MC) ETQ P3L PCC-M0740L (MC) Low DCR Type ETQ P4L PCC-M1040L (MC) ETQ P4L PCC-M1040L (MC) Low DCR Type ETQ P4L PCC-M1250L (MC) ETQ P5L Packaging Methods ∙ Soldering Conditions(Power Choke Coils (Consumer use) ) Safety Precautions (Common precautions for Power Choke Coils (Consumer use))
Chip ELT 3KN
49
Inductors CONTENTSProduct ltem Type ∙ Series Part Number Page
Power ChokeCoils
(AutomotiveGrade)
ETQ P3M□□□Y□□ ETQ P4M□□□Y□□ ETQ P5M□□□Y□□ ETQ P6M□□□Y□□
1
ETQ P5M□□□YSK ETQ P5M□□□YSC
17
20
25
37
ETQ P3M□□□HF□ 44
5253
Power ChokeCoils
(Consumer use)
55575961636567
Voltage Step-upCoils 69
02 Feb. 2020
Power Inductors
Power Choke Coil (Automotive Grade)SeriesPCC-M0530M、M0540M PCC-M0854M、M0850MPCC-M0630M、M0645M PCC-M1054M、M1050MPCC-M0754M、M0750M PCC-M1050ML、M1060ML
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 21 (Registered 2/Pending 19)
●High heat resistance : Operation up to 150 °C including self-heating ●Fig.1 ●High-reliability : Inductance v.s. DC current, Temp. High vibration resistance as result of newly developed ETQP5M470YFM (reference) integral construction; under severe reliability conditions of automotive and other strenuous applications●High bias current : Excellent inductance stability using ferrous alloy magnetic material (Fig.1)●Temp. stability : Excellent inductance stability over broad temp. range (Fig.1)●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 1,000 pcs/box (2 reel): PCC - M0645M,M0754M,M0750M,M0854M,M0850M,
M1054M,M1050M,M1050ML,M1060ML● 2,000 pcs/box (2 reel): PCC - M0530M,M0540M,M0630M
Explanation of Part Numbers
Temperature rating
Features
Code SizeP
4.7 μH□ 5 mm
4R7 →220 → 22 μH101 → 100 μH N □ 6 mm
M □ 7 mmK □ 8 mmC □ 10 mm
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
Operating temperature range Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P M Y
25 °C100 °C125 °C150 °C
0
10
20
30
40
50
60
0 1 320.5 1.5 2.5
DC Bias (A)
Indu
ctor
s (μ
H)
Product Code Height Winding Inductance Suffix SizeCoreClassification
1
Power Inductors
1. Series PCC-M0530M/PCC-M0540M (ETQP3M□□□YFP/ETQP4M□□□YFP)
ETQP3M2R2YFP 1ETQP3M3R3YFP 1ETQP4M4R7YFP 1ETQP4M220YFP 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 52 K/W measured on 5.5×5.0×3.0 mm case size and approx.
48 K/W measured on 5.5×5.0×4.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
22 163.0 (179.0) 1.9 2.3 3.1
5.0 8.64.6 36.0 ( 39.6) 4.0 4.8 7.7
Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
SeriesInductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K △L=–30%
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4
Standard Parts
PCC-M0530M[5.5×5.0×3.0(mm)]
PCC-M0540M[5.5×5.0×4.0(mm)]
Part No.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
*5
2.2
±20
22.6 ( 24.8)
±10
4.8 5.8 10.93.3 31.3 ( 34.4) 4.1
[ ETQP3M2R2YFP ] [ ETQP3M3R3YFP ]
[ ETQP4M4R7YFP ] [ ETQP4M220YFP ]
0 12 0 12
1 3 40 5
0.0
1.0
2.5
1.5
0.5
2.0
0
43
5
1
2
0
10
20
30
0 12
0
43
5
1
2
15
5
25
10
10
1014
14
14862 4
862 4
862 4
2
Indu
ctor
s(μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
DC Bias (A)
DC Bias (A)
DC Bias (A)
DC Bias (A)
2
Power Inductors
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
DC Bias (A)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
DC Bias (A)
DC Bias (A)
1.50.5 1.0 2.0 2.5 3.0 3.5
0
20
40
80
60
0
20
40
80
60
0
[ ETQP3M2R2YFP ] [ ETQP3M3R3YFP ]
[ ETQP4M4R7YFP ] [ ETQP4M220YFP ]
31 5 720 4 6 8
31 5 720 4 6
31 5 720 4 6
3
Power Inductors
2. Series PCC-M0630M/PCC-M0645M (ETQP3M□□□YFN/ETQP4M□□□YFN)
ETQP3MR68YFN 1ETQP3M1R0YFN 1ETQP4M2R2YFN 1ETQP4M3R3YFN 1ETQP4M6R8YFN 1ETQP4M100YFN 1ETQP4M220YFN 1ETQP4M330YFN 3ETQP4M470YFN 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.5×6.0×3.0 mm case size and approx. 37 K/W measured on 6.5×6.0×4.5 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
172.00 (189.20) 2.0 2.5 4.147 210.00 (231.00) 1.8 2.2 3.8
54.20 (59.60) 3.5 4.5 8.322 126.00 (138.60) 2.3 2.9 6.0
16.10 (17.71) 6.4 8.2 13.36.8 39.30 (43.20) 4.1 5.2 10.0
*3 *4 *5
10.7 20.0
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2
Standard Parts
PCC-M0645M[6.5×6.0×4.5(mm)]
Series
PCC-M0630M[6.5×6.0×3.0(mm)]
±10
9.8 12.0 24.00.68
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K △L=–30%
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
1.0
3.3
10
33
±20
6.30 (6.90)7.90 (8.70) 8.8
2.2 10.40 (11.44) 8.0 10.2 14.4
[ ETQP3MR68YFN ] [ ETQP3M1R0YFN ]
[ ETQP4M3R3YFN ] [ ETQP4M6R8YFN ] [ ETQP4M100YFN ]
[ ETQP4M220YFN ] [ ETQP4M330YFN ] [ ETQP4M470YFN ]
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
0.0
0.4
0.6
0.2
0.0
0.4
1.0
0.2
0
4
3
1
2
0
8
6
2
4
0
4
2
0
10
20
30
0
10
20
30
0
10
20
30
0.8
0.6
8
6
12
10
40
40
50
0 4 128 16 20 24 0 10 205 15
0 4 128 16 20 0 2 64 8 10 0 2 64 8
0 2 64 8 10 12 0 2 31 4 5 0 2 31 4 5
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
0.1
0.3
0.5
0.7
5
15
25
3
1
5
7
31 5 7 92 6 10 14 18 31 5 7 9
0.5 1.5 2.5 3.5 4.5 0.5 1.5 2.5 3.5 4.5
Indu
ctor
s(μ
H)
DC Bias (A)
0
3
1
2
0 10 205 15
[ ETQP4M2R2YFN ]
4
Power Inductors
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP3MR68YFN ] [ ETQP3M1R0YFN]
[ ETQP4M3R3YFN ] [ ETQP4M6R8YFN ] [ ETQP4M100YFN ]
[ ETQP4M220YFN ] [ ETQP4M330YFN ] [ ETQP4M470YFN ]
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 4 8 12 16 0 4 8 12 16
0 4 8 12 0 2 4 6 0 1 32 4 5 6
0 1 32 4 0 1 32 0 1 32
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
0
20
40
80
60
2 6 2 6
2 6
10 14 18 10 14 18
10 1 3 5 7
0.5 1.5 2.5 0.5 1.5 2.5
[ ETQP4M2R2YFN ]
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
0
20
40
80
60
0 4 8 12 162 6 10 14
5
Power Inductors
3. Series PCC-M0754M/PCC-M750M (ETQP5M□□□YFM/ETQP5M□□□YGM)
ETQP5M3R3YFM 1ETQP5M4R7YFM 1ETQP5M6R8YFM 1ETQP5M100YFM 1ETQP5M220YFM 1ETQP5M330YFM 1ETQP5M470YFM 1ETQP5M680YFM 1
ETQP5M101YGM 3
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant is approx. 31 K/W measured on 7.5×7.0×5.4 mm case size and approx. 29 K/W measured on 7.5×7.0×5.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
95 348.00 (382.80) 1.4 1.9 3.1
2.9 4.166 251.00 (276.10) 1.8 2.3 3.9
22 92.00 (102.00) 3.0 3.7 5.810 37.60 (41.30) 4.7 5.7 10.6
±20
11.90 (13.09)
±10
8.34.7 20.40 (22.50) 6.36.8 26.70 (29.40) 5.5
33 120.00 (132.00) 2.648 156.00 (172.00) 2.3
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K △L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
Standard Parts
Series
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
PCC-M0750M[7.5×7.0×5.0(mm)]
3.3 10.48.06.9
14.413.112.1
3.3 4.8
PCC-M0754M[7.5×7.0×5.4(mm)]
[ ETQP5M6R8YFM]
[ ETQP5M220YFM ] [ ETQP5M330YFM ]
[ ETQP5M470YFM ] [ ETQP5M101YGM ]
[ ETQP5M100YFM ]
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
0
4
3
1
2
6
5
0 10 205 15
0
10
20
25
5
15
0 2 64 8 100
10
20
30
40
0 2 64 8
0
10
20
30
40
50
60
0 2 31 4 5 60
20
40
80
60
100
0 2 31 4 5
0
8
6
2
4
0 84 12 16
3
1
5
7
2 6 10 14
0
4
2
8
6
12
10
0 84 12 162 6 10 14
[ ETQP5M4R7YFM ][ ETQP5M3R3YFM ]
[ ETQP5M680YFM ]
Indu
ctor
s(μ
H)
DC Bias (A)
0
4
3
1
2
0 10 205 15
Indu
ctor
s(μ
H)
DC Bias (A)
0
20
40
80
60
0 2 64 831 5 7
6
Power Inductors
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP5M4R7YFM ] [ ETQP5M6R8YFM]
[ ETQP5M220YFM ] [ ETQP5M330YFM ]
[ ETQP5M470YFM ]
[ ETQP5M100YFM ]
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A)
0
20
40
80
60
0 2 4 6 8 100
20
40
80
60
0 2 4 6 8 10
0
20
40
80
60
0 2 4 6 80
20
40
80
60
0 1 32 4 50
20
40
80
60
0 1 32 4 5
0
20
40
80
60
0 1 32 4
[ ETQP5M101YGM ]
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
0
20
40
80
60
0 1 320.5 1.5 2.5
DC Bias (A) DC Bias (A)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP5M680YFM ]
[ ETQP5M3R3YFM ]
0
20
40
80
60
0
20
40
80
60
0 2 4 6 8 10 12 14
0 1 32 4
7
Power Inductors
4. Series PCC-M0854M/PCC-M0850M (ETQP5M□□□YFK/ETQP5M□□□YGK)
ETQP5M2R5YFK 1ETQP5M3R3YFK 1ETQP5M100YFK 1ETQP5M150YFK 1ETQP5M220YFK 1ETQP5M470YFK 1
ETQP5M101YGK 3
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 8.5×8.0×5.4 mm case size and approx.
29 K/W measured on 8.5×8.0×5.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
48 125.00 (138.00) 2.9 3.4 5.4
48.20 (53.10) 4.7 5.5 7.26.9
*5
2.5
±20
7.60 (8.40)
±10
11.9 14.0 20.13.3 9.50 (10.45) 10.7 12.5 17.910 13.015
△L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4
Standard Parts
SeriesPart No.
PCC-M0854M[8.5×8.0×5.4(mm)]
33.40 (36.80) 5.7 6.7
22 63.00 (70.00) 4.1 4.8
Inductance *1 DCR (at 20 ℃)(mΩ)
Rated Current (Typ. : A) MSLLevel△T=40K
Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
PCC-M0850M[8.5×8.0×5.0(mm)]
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
100 302.00 (333.00) 1.7 2.1 3.0
[ ETQP5M2R5YFK ] [ ETQP5M100YFK ]
[ ETQP5M150YFK ] [ ETQP5M220YFK ] [ ETQ5M470YFK ]
[ ETQP5M101YGK ]
[ ETQP5M3R3YFK ]
Indu
ctor
s (μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
DC Bias (A) DC Bias (A) DC Bias (A)
0
10
20
25
5
15
0 2 64 8 10010
203040
5060
0 2 64 8
40
020
80
60
100120
0 2 31 4 5
DC Bias (A)
0 10 20 300.0
1.0
2.5
1.5
0.5
2.0
3.0
5 15 25 0
4
2
8
6
1210
0 84 12 162 6 10 14
0 84 120
10
20
5
15
2 6 10
DC Bias (A) DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
Indu
ctor
s(μ
H)
0 10 20 305 15 250
4
3
1
2
8
Power Inductors
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP5M2R5YFK ] [ ETQP5M100YFK ]
[ ETQP5M150YFK ] [ ETQP5M220YFK ] [ ETQ5M470YFK ]
[ ETQP5M101YGK ]
DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
0
20
40
80
60
0 2 4 6 8 10
0
20
40
80
60
0 4 8 12 16 20
0
20
40
80
60
0 1 32 4 5 6 70
20
40
80
60
0 1 32 4 5
0
20
40
80
60
1.50.5 1.0 2.0 2.5 3.00
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0 2 64 81 3 5 7DC Bias (A) DC Bias (A)
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
0
20
40
80
60
0 63 9 12 15 18
[ ETQP5M3R3YFK ]
9
Power Inductors
5. Series PCC-M1054M/PCC-M1050M (ETQP5M□□□YFC/ETQP5M□□□YGC)
ETQP5M1R5YFC 1ETQP5M2R5YFC 1ETQP5M3R3YFC 1ETQP5M4R7YFC 1ETQP5M100YFC 1ETQP5M150YFC 1ETQP5M220YFC 1ETQP5M330YFC 1ETQP5M470YFC 1ETQP5M680YFC 1ETQP5M3R3YGC 3
ETQP5M101YGC 3
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.7×10.0×5.4 mm case size and approx.
26 K/W measured on 10.7×10.0×5.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
208.00 (229.00) 2.2 2.7 3.0
4.93.3 7.10 (7.81) 11.8 14.7 23.4
4.2 6.832.5 68.50 ( 75.40) 4.2 5.0
6.2 8.815 35.60 (39.16)
7.6
1.45
±20
3.80 (4.20)
±10
17.9
3.3 7.10 (7.90) 13.14.7
22 45.00 (50.00) 5.2
47 99.00 (108.90) 3.5
97
2.5 5.30 (5.90) 15.1 18.1 27.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
PCC-M1050M[10.7×10.0×5.0(mm)]
66 136.00 (149.60) 3.0 3.6
PCC-M1054M[10.7×10.0×5.4(mm)]
10.20 (11.30) 10.910 23.80 (26.20) 7.1
21.4 35.1
8.5 10.75.8 7.0
15.7 22.713.1 20.0
12.0
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K Series△L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
[ ETQP5M4R7YFC ]
[ ETQP5M470YFC ][ ETQP5M330YFC ]
[ ETQP5M100YFC ] [ ETQP5M150YFC ]
[ ETQP5M220YFC ]
0 10 20 30 40 0 10 20 30 40 0 10 20 30
0 10 205 15 0 84 12 16 0 84 122 6 1410
0 842 6 10 0 842 6 10 0 842 6 10
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
0.4
1.2
0.8
1.6
1.0
2.5
1.5
0.5
2.0
3.0
0
4
3
1
2
0
43
12
6
5
0
4
2
86
1210
0
10
20
5
15
0
10
20
25
5
15
0102030
405060
0
10
20
30
40
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
0.0 0.0 5 15 25
2 6 10 14
[ ETQP5M1R5YFC ] [ ETQP5M2R5YFC ] [ ETQP5M3R3YFC ]
NEW
10
Power Inductors
Performance Characteristics (Reference 1)
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP5M1R5YFC ] [ ETQP5M2R5YFC]
[ ETQP5M4R7YFC ]
[ ETQP5M470YFC ][ ETQP5M330YFC ]
[ ETQP5M680YFC ]
[ ETQP5M3R3YFC ]
[ ETQP5M100YFC ] [ ETQP5M150YFC ]
[ ETQP5M220YFC ]
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 4 8 12 16 20 0 2 4 6 8100 2 64 8
0 4 128 16 20 240 10 205 15 25 30 0 10 205 15 25
1012
100 2 64 8 0 1 32 4 5 6 7
0 1 32 4 5 6
[ ETQP5M101YGC ]
DC Bias (A)
0
20
40
80
60
0 1 32 4 5
0 2 31 4
[ ETQP5M680YFC ]
0 2 4 61 3 5 8 9
DC Bias (A)
0
20
40
80
60
Indu
ctor
s(μ
H)
7
[ ETQP5M101YGC ]
DC Bias (A)
02040
80
60
100120
Indu
ctor
s(μ
H)
2 4 61 3 70 5DC Bias (A)
0
4
3
1
2
0 10 205 15 25 30 35
Indu
ctor
s(μ
H)
[ ETQP5M3R3YGC ]
0
20
40
80
60
0 10 205 15
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
Tem
pera
ture
ris
e ΔT
(K)[ ETQP5M3R3YGC ]
11
Power Inductors
6. Series PCC-M1050ML/PCC-M1060ML (ETQP5M□□□YLC/ETQP6M□□□YLC)
ETQP5MR33YLC 1ETQP5MR68YLC 1ETQP5M1R0YLC 1ETQP5M2R0YLC 1ETQP6M1R5YLC 1ETQP6M2R5YLC 1ETQP6M3R3YLC 1ETQP6M4R7YLC 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.9×10.0×5.0 mm case size and approx.
23 K/W measured on 10.9×10.0×6.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
17.0 26.34.7 8.70 (9.57) 11.8 14.1 22.53.3 6.00 (6.60) 14.2
23.3 32.02.5 4.55 (5.00) 16.3 19.6 25.8
±10
33.20.68 1.75 (1.93) 26.31.0 2.30 (2.53) 23.02.0 4.60 (5.06) 16.21.5 3.20 (3.52) 19.5
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K Series△L=–30%
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
19.4 31.3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
PCC-M1060ML[10.9×10.0×6.0(mm)]
PCC-M1050ML[10.9×10.0×5.0(mm)]
39.7 56.731.5 40.027.5 37.8
0.33
±20
1.10 (1.21)
[ ETQP5MR33YLC ] [ ETQP5MR68YLC ]
[ ETQP5M1R0YLC ]
[ ETQP6M2R5YLC ]
[ ETQP5M2R0YLC ]
[ ETQP6M1R5YLC ]
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60
0 10 20 30 40 50 60
0 10 20 30 40
0 10 205 15 25 30 40 5035 45
0 10 205 15 25 30 40 5035 45
0.1
0.3
0.2
0.4
0.0
0.60.7
0.2
0.4
0.00.1
0.3
0.5
0.0
0.4
1.0
0.2
0.80.6
1.2
0.0
1.0
2.5
1.5
0.5
2.0
3.0
0.0
1.0
2.5
1.5
0.5
2.0
0.0
1.0
1.5
0.5
2.0
DC Bias (A)DC Bias (A)
DC Bias (A)DC Bias (A)
DC Bias (A)DC Bias (A)
12
Power Inductors
Performance Characteristics (Reference 1)
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP5MR33YLC ] [ ETQP5MR68YLC ]
[ ETQP5M1R0YLC ]
[ ETQP6M2R5YLC ]
[ ETQP6M3R3YLC ]
[ ETQP5M2R0YLC ]
[ ETQP6M1R5YLC ]
[ ETQP6M4R7YLC ]
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)DC Bias (A)
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 10 20 30 40 50 60 0 10 205 15 25 30 4035 45
0 10 205 15 25 30 35 0 10 205 15 25 30
0 10 205 15 25 30 35
0 10 205 15 25 0 10 205 15
DC Bias (A)DC Bias (A)
DC Bias (A)DC Bias (A)
DC Bias (A)DC Bias (A)
0 8 164 12 20 24 28
[ ETQP6M3R3YLC ]
Indu
ctor
s(μ
H)
DC Bias (A)
[ ETQP6M4R7YLC ]
Indu
ctor
s(μ
H)
DC Bias (A)0 10 205 15 25 30 4035 0 10 205 15 25 30 4035
0.0
1.0
2.5
1.5
0.5
2.0
3.03.5
0
4
3
1
2
5
13
Power Inductors
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
3.0 max.4.0 max.
M0850M 5.0 max.
(ETQP5M□□□YFC/YGC) (ETQP5M□□□YLC/ETQP6M□□□YLC)
Series PCC-M0754M Series PCC-M0854M
Series PCC-M1054M Series PCC-M1050MLSeries PCC-M1050M Series PCC-M1060ML
Series HM0754M 5.4 max.
Series HM0630M 3.0 max.M0645M 4.5 max.
SeriesM0530MM0540M
Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
(ETQP5M□□□YFM/YGM)Series PCC-M0750M
(ETQP5M□□□YFK/YGK)Series PCC-M0850M
H
Series HM0854M 5.4 max.
Series PCC-M0530M
(ETQP3M□□□YFP/ETQP4M□□□YFP)
Series PCC-M0630M
(ETQP3M□□□YFN/ETQP4M□□□YFN)Series PCC-M0540M Series PCC-M0645M
M0750M 5.0 max.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
M1050M 5.0 max.
Series HM1050ML 5.0 max.M1060ML 6.0 max.
Series HM1054M 5.4 max.
3.0±
0.3
1.2 1.2
H
SuffixInductance5.5±0.4
5.0±
0.4
PolarityDate Code
0.05
min
.
SuffixInductance
PolarityDate Code
3.0±
0.3
1.5 1.5
6.5±0.4
6.0±
0.4
H0.
05m
in.
SuffixInductance SuffixInductance
SuffixInductance SuffixInductance
PolarityDate CodePolarityDate Code
PolarityDate Code PolarityDate Code
3.0±
0.3
2.0 2.0
H
7.5±0.4
7.0±
0.4
0.1m
in.
3.0±
0.3
2.0
H8.5±0.4
8.0±
0.4
4.2±
0.3
10.7±0.5
10.0
±0.
4
7.3±
0.3
1.8 1.8
H
0.15
min
.
2.0
0.1m
in.
2.0 2.0
10.9±0.6
10.0
±0.
4
H0.
1min
.
14
Power Inductors
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
※Don't wire on the pattern on shaded portion the PWB.
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
Series PCC-M0854M Series PCC-M0850M
(ETQP5M□□□YFK/YGK)
Series PCC-M1050ML Series PCC-M1060ML
(ETQP5M□□□YLC/ETQP6M□□□YLC)
Series PCC-M1054MSeries PCC-M1050M
(ETQP5M□□□YFC/YGC)
Series PCC-M0540M Series PCC-M0750M Series PCC-M0530M Series PCC-M0630M
(ETQP3M□□□YFN/ETQP4M□□□YFN)Series PCC-M0645M
(ETQP3M□□□YFP/ETQP4M□□□YFP)
Series PCC-M0754M
(ETQP5M□□□YFM/YGM)
6.0
3.6
6.1
2.27.2
7.0
3.6
7.1
2.88.8
9.0
4.0
9.4
3.812.4
11.0
4.8
11.7
6.113.7
7.9
11.9
6.513.9
3.6
8.4
2.810.0
8.0
11.0
15
Power Inductors
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
PCC-M0530M PCC-M0540M PCC-M0630M PCC-M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1050ML/M1060ML
● Taping Reel Dimensions in mm (not to scale)
PCC-M0530M/M0540M PCC-M0630M/M0645M PCC-M0754M/M0750M PCC-M0854M/M0850M PCC-M1054M/M1050M PCC-M1050ML/M1060ML
Component Placement (Taping)
Standard Packing Quantity/Reel
1,000 pcs PCC-M0540M ETQP4M◻◻◻YFP PCC-M0630M ETQP3M◻◻◻YFN PCC-M0645M ETQP4M◻◻◻YFN
1,000 pcs / box(2 reel) 500 pcs
PCC-M0754M ETQP5M◻◻◻YFM PCC-M0750M ETQP5M◻◻◻YGM PCC-M0854M ETQP5M◻◻◻YFK PCC-M0850M ETQP5M◻◻◻YGK
SeriseM0630M/M0645MM0754M/M0750MM0854M/M0850M
SeriseM0530M/M0540MM1054M/M1050MM1050ML/M1060ML
PCC-M1050ML ETQP5M◻◻◻YLC PCC-M1060ML ETQP6M◻◻◻YLC
PCC-M0530M ETQP3M◻◻◻YFP2,000 pcs / box(2 reel)
Series
A
A
5.6
16.01.75
7.52.0
0.4
3.34.3
7.1 3.35.0
8.1 6.09.1
10.65 11.5 0.5
B
8.67.6
W E F P1 P2
11.75
6.6
6.1
Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
C D E WB
100 13 221
PCC-M1054M ETQP5M◻◻◻YFC PCC-M1050M ETQP5M◻◻◻YGC
33017.5
25.5
Serise
Serise Part No. Minimum Quantity/ Packing Unit Quantity per reel
P0 φD0 t1 t2
24.0
12.0
6.35
1.54.0
16.0
E
W
t1
t2P2 P0
P1
A
Tape running direction
F
A
E
DW
B
C
Terminal
B
Term
inal
16
Power Inductors
Power Choke Coil (Automotive Grade)Series : PCC-M0854MS
PCC-M1050MS
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 18 (Registered 10/Pending 8)
●The vibration-resistant structure achieves a vibration acceleration-resistance of 50 G or higher in 150 ºC environments●Reduce core loss in high frequency band (More than 2 MHz)●High heat resistance : Operation up to 150 °C including self-heating●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction;
under severe reliability conditions of automotive and other strenuousapplications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : New metal composite core technology●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ●ECU placed in the engine itself, mechanical-electrical-integrated ECU●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 1,000 pcs/box (2 reel)
Explanation of Part Numbers
Temperature rating
Features
R68 → Code SizeK
0.68 μH□ 8 mm
C □ 10 mm
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Operating temperature range Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P M Y SProduct Code Height Winding Inductance Suffix SizeCoreClassification
17
Power Inductors
ETQP5M2R5YSK 1
ETQP5MR68YSC 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 30 K/W measured on 8.5×8.0×5.4 mm case size and approx.
20 K/W measured on 10.9×10.0×5.0 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference)● Inductance vs DC Current
● Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K △L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
21.7
0.68 1.66 (1.83) 27.0 32.3 40.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Series
PCC-M0854MS[8.5×8.0×5.4(mm)]
PCC-M1050MS[10.9×10.0×5.0(mm)]
Series PCC-M0854MS(ETQP5M□□□YSK)
Series PCC-M1050MS(ETQP5M□□□YSC)
2.45±20
7.40 (8.14)±10
12.0 14.1
[ ETQP5M2R5YSK ] [ ETQP5MR68YSC ]
[ ETQP5M2R5YSK ] [ ETQP5MR68YSC ]
DC Bias (A) DC Bias (A)
Tem
pera
ture
ris
eΔT
(K)
DC Bias (A)
Tem
pera
ture
ris
eΔT
(K)
DC Bias (A)
Indu
ctor
s(μ
H)
Indu
ctor
s (μ
H)
0 10 205 15 30250.0
1.0
2.5
1.5
0.5
2.0
3.00.60.7
0.2
0.4
0.00.1
0.3
0.5
0 10 20 30 40 50
0
20
40
80
60
0
20
40
80
60
0 10 205 15 25 30 35 40 45100 2 64 8 12 14 16 18 20
5.08
±0.
3
1.3 1.3
8.5±0.4
8.0±
0.4
0.1
min
.
5.4
max
.
10.9±0.6
7.3±
0.3
1.8 1.8
10.0
±0.
40.
15 m
in.
5.0
max
.
SuffixInductance
PolarityDate Code
SuffixInductance
PolarityDate Code
18
Power Inductors
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
PCC-M0854MS PCC-M1050MS
● Taping Reel Dimensions in mm (not to scale)
Standard Reel Dimensions
PCC-M0854MS PCC-M1050MS
Component Placement (Taping)
Standard Packing Quantity/Reel
PCC-M0854MS PCC-M1050MS
6.00.4
330
ETQP5M◻◻◻YSKETQP5M◻◻◻YSC
A
7.5 12.09.1 8.6
Series
16.016.0
2.0 4.0 1.510.65 11.75 24.0
1.7511.5 0.5
E W17.52 25.5
6.35
B C φD
100 13 21
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
500 pcs1,000 pcs / box(2 reel)Serise Part No. Minimum Quantity/ Packing Unit Quantity per reel
Series PCC-M0854MS Series PCC-M1050MS(ETQP5M□□□YSK)
W E F P1 t1 t2
(ETQP5M□□□YSC)
Series BA P2 P0 φD0
A
E
DW
B
C
E
W
t1t2P2 P0
P1
A
Tape running direction
F
B
7.9
11.9
6.513.9
116
9.5
10.5
9
4.826
Serise PCC-M0854MS Serise PCC-M1050MS
Terminal
Term
inal
19
Power Inductors
Power Choke Coil (Automotive Grade)Series : PCC-M1280MF
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 3 (Registered 1/Pending 2)
●High heat resistance : Operation up to 160 °C including self-heating●Large current Power :53 A (R33 type)●High vibration resistance :30 G●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction;
under severe reliability conditions of automotive and other strenuous applications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Recommended Applications ● 500 pcs/box (2 reel)
Explanation of Part Numbers
Temperature rating
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Operating temperature range Tc : -40 ℃ to +160 ℃ (Including self-temperature rise)
Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting
Code Size4R7 → 4.7 μH A
0.68 μH□ 12 mm
Features
R68 →
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P 8 M JProduct Code Height Winding Inductance Suffix SizeCoreClassification
20
Power Inductors
ETQP8MR33JFA 1ETQP8MR68JFA 1ETQP8M1R0JFA 1ETQP8M1R5JFA 1ETQP8M2R5JFA 1ETQP8M3R3JFA 1ETQP8M4R7JFA 1*1: Measured at 100 kHz ▲ETQP8MR33JFA : Under development*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 20 K/W measured. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +160°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1)● Inductance vs DC Current
▲ Under development
4.7 4.90 (5.39) 16.8 20.2 24.7
23.0 27.7 32.13.3 3.60 (3.96) 19.6 23.6 27.6
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A)
△T=40K △L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4
PCC-M1280MF[12.6×13.2×8.0(mm)]
Series
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
1.36 (1.50) 31.8
MSLLevel
*5
38.3 44.41.5 1.80 (1.98) 27.7 33.3 29.92.5 2.60 (2.86)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
±20
0.70 (0.77)
±10
44.4 53.5 84.50.68 1.10 (1.21) 35.4 42.6 56.90.33
1.0
PCC-M1280MF[12.6×13.1×8.0(mm)]
0.1
[ ETQP8MR33JFA ] [ ETQP8MR68JFA ]
[ ETQP8M1R5JFA ] [ ETQP8M2R5JFA ] [ ETQP8M3R3JFA ]
[ ETQP8M4R7JFA ]
Indu
ctor
s (μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s (μ
H)
0.4
0.2
0.0 0.0 0.0
0
0.70.6
0 40 120806020 1400.0
70100 80
0 20
0
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A)
5
30
Indu
ctor
s (μ
H)
DC Bias (A)
0
3
2
0
10 20
[ ETQP8M1R0JFA ]
0.05
4
1.0
1
0.8
1.2
0.00
0.100.150.200.25
0.350.30
0.40
100 160
0.3
0.5
0 20 40 60 80
0.40.2
0.6
0.0
0
50 6030 40
1.0
1.5
0.5
2.0
50 604010
1.0
2.5
1.5
0.5
2.0
3.0
1.0
2.5
1.5
0.5
2.0
3.0
20 30 50 604010
3.5
20 30 504010
20 30 504010
▲
21
Power Inductors
Performance Characteristics (Reference 2)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
▲ Under development
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020
[ ETQP8MR33JFA ] [ ETQP8MR68JFA]
[ ETQP8M1R5JFA ] [ ETQP8M2R5JFA ] [ ETQP8M3R3JFA ]
[ ETQP8M4R7JFA ]
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A)
[ ETQP8M1R0JFA ]
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 0 10 20 30 40 50 60
0 10 20 30 40 50 0 10 205 15 25 30 4035 0 10 205 15 25 30 35
0 10 205 15 25 30
▲
22
Power Inductors
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
●ETQP8MR33JFA ●ETQP8M1R5JFA ●ETQP8M3R3JFA●ETQP8MR68JFA ●ETQP8M2R5JFA ●ETQP8M4R7JFA●ETQP8M1R0JFA
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
●ETQP8MR33JFA ●ETQP8M4R7JFA ●ETQP8M3R3JFA
●ETQP8M2R5JFA ●ETQP8MR68JFA●ETQP8M1R0JFA●ETQP8M1R5JFA
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
ETQP8MR68JFAETQP8M1R0JFA
Part No.
ETQP8M1R5JFAETQP8M2R5JFA
ETQP8MR33JFA
Should a safety concern arise regarding this product, please be sure to contact us immediately.Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
02 Feb. 2020
8.6±0.85
9.0±1.258.8±1.05
ETQP8M4R7JFA2.1±0.4 8.0±1.0 1.25±0.42.1±0.4 8.0±1.02.1±0.4 8.0±1.01.8±0.4
BA B2.25±0.2
APart No.ETQP8M3R3JFA7.3±1.0 1.5±0.4
A
B
20
Inductance12.6±0.5
13.2
±0.
5
0.05
min
.
Inductance
0.05
min
.
12.6±0.5
13.1
±0.
5R68 3R3
Data code Data code
A A
B
A
8.0m
ax.
8.0m
ax.
10 10 10 10 10 10
10 10 10 10
Recommendcopper pad area
14.22.0
5.7
4.35
14.8
5.4
4.0
5.4
20 14.8 20 14.8
20 14.8
20 14.8
5.4
4.0
5.4
5.4
4.0
5.4
5.4
4.0
5.4
5.4
4.0
5.4
13.62.0
7.2
13.82.0
7.0
14.22.0
6.2
14.12.0
6.7
3.2 3.4
3.7 4.0
Recommendcopper pad area
Recommendcopper pad area
Recommendresist opening area
Recommendresist opening area Recommend
resist opening areaDon't wire this portion with PWB. Don't wire this portion with PWB.Don't wire this portion with PWB.
Recommendcopper pad area
Recommendresist opening area
Don't wire this portion with PWB.
Recommendcopper pad area
Recommendresist opening area
Don't wire this portion with PWB.
23
Power Inductors
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
● Component Placement (Taping)
● Taping Reel Dimensions in mm (not to scale)
Standard Reel Dimensions
Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
PCC-M1280MFW
330 (100) 13 21 2 33.5A B C φD ESerise
4±0.22±0.2
A-A’
Sec
tion
1.75
±0.
128
.4±
0.1
32±
0.3
13.3
5±0.
5
1.7+
0.15
A'
9.6±0.50.5A20.0±0.2
1.5+0.1
B
D
12.9±0.5
0
D B-B’ Section
0.05
A
E
φDW
B
C
Tape running direction
Terminal Terminal
24
Power Inductors
Power Choke Coil (Automotive Grade)SeriesPCC-M0530M-LP PCC-M0630M-LPPCC-M0840M-LP PCC-M1040M-LP
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 3 (Registered 2/Pending 1)
Features●High heat resistance : Operation up to 155 °C including self-heating●Low profile : 3mm max. height(PCC-M0530M-LP, PCC-M0630M-LP)
4mm max. height(PCC-M0840M-LP, PCC-M1040M-LP)●SMD type ●High-reliability : High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous applications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material ●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit) ●4,000 pcs/box (2 reel): PCC-M0530M-LP,M0630M-LP●1,000 pcs/box (2 reel): PCC-M0840M-LP,M1040M-LP
Explanation of Part Numbers
Temperature rating
0.68 μH
□ 10 mm
Recommended Applications
After PWB mounting
4.7 μH22 μH
Storage condition
Operating temperature range
Before PWB mounting
→→
4R7220
→R68
Ta : -5 ℃ to +35 ℃ 85%RH max.
Tc : -55 ℃ to +155 ℃ (Including self-temperature rise)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01 Feb. 2020Should a safety concern arise regarding this product, please be sure to contact us immediately.
K
Size□ 5 mm□ 6 mm□ 8 mm
CodePN
C
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P M K VProduct Code Height Winding Inductance Suffix SizeCoreClassification
25
Power Inductors
1. Series PCC-M0530M-LP (ETQP3M□□□KVP)
ETQP3M100KVP 1ETQP3M6R8KVP 1ETQP3M4R7KVP 1ETQP3M3R3KVP 1ETQP3M2R2KVP 1ETQP3M1R5KVP 1ETQP3M1R0KVP 1ETQP3MR68KVP 1ETQP3MR33KVP 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 51 K/W measured on 5.5×5.0×3.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1) ● Inductance vs DC Current
15.90.33 4.85 (5.34) 10.6 12.7 21.8
7.5 9.0 14.11.50 12.00 (13.20)
65.70 (72.27) 2.9 3.5 6.110.00
±20
96.00 (105.60)
±10
2.4
4.70 45.60 (50.16) 3.43.30
12.01.00 9.60 (10.56)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
0.68 7.60 (8.36) 8.4 10.2
PCC-M0530M-LP[5.5×5.0×3.0(mm)]
27.30 (30.03) 4.42.20 20.00 (22.00) 5.2
2.9 4.26.80
6.3 10.16.7 8.1
4.1 6.75.4 8.0
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K Series△L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
Indu
ctor
s(μ
H)
[ ETQP3M100KVP ]
DC Bias (A)0 2 64 8
0
4
8
12
[ ETQP3M3R3KVP ]
[ ETQP3M1R0KVP ]
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
DC Bias (A)
0
1.0
3.0
0 4 128 16
0 10 200
0.4
0.8
1.2
2.0
Indu
ctor
s(μ
H)
[ ETQP3M6R8KVP ]
DC Bias (A)
[ ETQP3M2R2KVP ]
[ ETQP3MR68KVP ]
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
[ ETQP3M4R7KVP ]
DC Bias (A)
[ ETQP3M1R5KVP ]
[ ETQP3MR33KVP ]
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
DC Bias (A)
0 2 64 80
4
8
2
0 2 64 120
4
3
5
6
10
1
2
8 10
0
1.0
2.5
0 4 128 16
2.0
0
1.0
1.5
0 4 128 16
2.0
1.5
0.5 0.5
20
0 10 200
0.4
0.8
0.6
0
0.2
0.3
0.4
0 4 128 16 20
0.2
30
0.1
26
Power Inductors
Performance Characteristics (Reference 2) ● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP3M100KVP ]
0 1 32 40
20
40
80
[ ETQP3M3R3KVP ]
[ ETQP3M1R0KVP ]
0 2 64 8
0 124 8
5
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
0 1 32 4 5 0 1 32 4 5 6
0 2 64 8 0 2 64 8 10 12
0 124 8 16 0 124 8 16
[ ETQP3M6R8KVP ]
[ ETQP3M2R2KVP ]
[ ETQP3MR68KVP ]
[ ETQP3M4R7KVP ]
[ ETQP3M1R5KVP ]
[ ETQP3MR33KVP ]
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
27
Power Inductors
2. Series PCC-M0630M-LP (ETQP3M□□□KVN)
ETQP3M330KVN 1ETQP3M220KVN 1ETQP3M150KVN 1ETQP3M100KVN 1ETQP3M6R8KVN 1ETQP3M4R7KVN 1ETQP3M3R3KVN 1ETQP3M2R2KVN 1ETQP3M1R5KVN 1ETQP3M1R0KVN 1ETQP3MR68KVN 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.4×6.0×3.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1) ● Inductance vs DC Current
9.9 12.1 16.00.68 5.20 (5.72) 10.8 13.2 20.2
6.5 7.9 12.81.50 11.00 (12.10) 7.4 9.1 14.2
4.6 5.6 9.83.30 24.10 (26.51) 5.0 6.1 11.5
5.86.80 45.60 (50.16) 3.6 4.5 8.1
33.00
±20
206.00(226.60)22.00 128.00(140.80)15.00 99.20 (109.12)10.00 71.00 (78.10)
4.70 29.00 (31.90)
2.20 14.50 (15.95)
1.00 6.20 (6.82)
PCC-M0630M-LP[6.4×6.0×3.0(mm)]
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
±10
1.7 2.1 3.02.22.5 3.0 5.12.9 3.6
2.7 4.3
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K Series△L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
Indu
ctor
s(μ
H)
[ ETQP3M330KVN ]
DC Bias (A)0 2 543
0
10
20
30
[ ETQP3M6R8KVN ]
[ ETQP3M1R5KVN ]
0
2
6
0 4 128 16
0 124 80
0.5
1.0
1.5
4
1
8
16 20 24
2.0
Indu
ctor
s (μ
H)
[ ETQP3M220KVN ]
DC Bias (A)0 2 64
0
5
15
20
8
Indu
ctor
s(μ
H)
[ ETQP3M150KVN ]
DC Bias (A)0 642
0
10
15
20In
duct
ors
(μH
)
[ ETQP3M100KVN ]
DC Bias (A)0 6 12108
0
4
8
12
4
25
10
5
8 2
[ ETQP3M4R7KVN ]
0
2
4
0 4 128 16
3
5[ ETQP3M3R3KVN ]
0
2.0
0 4 128 20
1.0
3.0
[ ETQP3M2R2KVN ]
0
1.0
2.0
0 4 128 16
1.5
2.5
20
1 0.5
16 20 24
[ ETQP3M1R0KVN ]
0 10 200
0.4
0.8
30
1.2
[ ETQP3MR68KVN ]
0 100
0.2
0.4
0.6
20 30 40
0.8
Indu
ctor
s(μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s(μ
H)
Indu
ctor
s (μ
H)
Indu
ctor
s(μ
H)
DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
28
Power Inductors
Performance Characteristics (Reference 2) ● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP3M330KVN ]
DC Bias (A)0 1 32
0
20
40
80
[ ETQP3M6R8KVN ]
[ ETQP3M1R5KVN ]
0 2 64
0 124 8
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP3M220KVN ]
DC Bias (A)0 1 32
0
20
40
80
[ ETQP3M4R7KVN ]
[ ETQP3M1R0KVN ]
0 2 64
0 2010 15
60Te
mpe
ratu
re r
ise
ΔT(K
)Te
mpe
ratu
re r
ise
ΔT(K
)
0
20
40
80
60
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP3M150KVN ]
DC Bias (A)0 1 52
0
20
40
80
[ ETQP3M3R3KVN ]
[ ETQP3MR68KVN ]
0 2 64
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP3M100KVN ]
DC Bias (A)0 2 64
0
20
40
80
[ ETQP3M2R2KVN ]
0 4 128
60
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
4 3 4
8 8
5 0 2010 155
DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
29
Power Inductors
3. Series PCC-M0840M-LP (ETQP4M□□□KVK)
ETQP4M330KVK 1ETQP4M220KVK 1ETQP4M150KVK 1ETQP4M100KVK 1ETQP4M6R8KVK 1ETQP4M4R7KVK 1ETQP4M3R3KVK 1ETQP4M2R2KVK 1ETQP4M1R5KVK 1ETQP4M1R0KVK 1ETQP4MR68KVK 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 36 K/W measured on 8.5×8.0×4.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference 1) ● Inductance vs DC Current
0.68 2.92 (3.21) 16.6 19.5 29.01.00 3.70 (4.07) 14.8 17.3 24.4
20.41.50 4.90 (5.39) 12.8 15.1 22.5
15.13.30 14.10 (15.51) 7.6 8.9 17.4
6.80 23.50 (25.85)16.10 (17.71) 7.1 8.3
3.215.00 55.00 (60.50) 3.810.00 41.60 (45.76) 4.4
PCC-M0840M-LP[8.5×8.0×4.0(mm)]
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
2.20 8.50 (9.35) 9.8 11.4
5.9 6.9 11.04.70
4.5 7.65.2 9.1
3.1 4.73.8 6.0
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A)
33.00
±20
118.00 (129.80)
±10
2.622.00 78.40 (86.24)
MSLLevel△T=40K Series△L=–30%
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
Indu
ctor
s(μ
H)
[ ETQP4M330KVK ]
DC Bias (A)0 4 62
0
10
20
30
[ ETQP4M6R8KV ]
[ ETQP4M1R5KVK ]
Indu
ctor
s(μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
DC Bias (A)
0
2
6
0 5 1510 20
0 3010 200
0.5
1.0
1.5
4
8
40
2.0
Indu
ctor
s (μ
H)
[ ETQP4M220KVK ]
DC Bias (A)0 8 1240
10
20
25
[ ETQP4M4R7KVK ]
[ ETQP4M1R0KVK ]
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
0
2
4
0 2010 30
0 3010 200
0.4
0.8
1.2
3
5
40
Indu
ctor
s(μ
H)
[ ETQP4M150KVK ]
DC Bias (A)0 8 124
0
10
15
20
[ ETQP4M3R3KVK ]
[ ETQP4MR68KVK ]
Indu
ctor
s (μ
H)
DC Bias (A)
Indu
ctor
s (μ
H)
DC Bias (A)
0
1.0
3.0
0 2010 30
0 3010 200
0.2
0.4
0.6
2.0
40
0.8
Indu
ctor
s (μ
H)
[ ETQP4M100KVK ]
DC Bias (A)0 8 124
0
4
8
12
[ ETQP4M2R2KVK ]
Indu
ctor
s(μ
H)
DC Bias (A)
0
0.5
1.5
0 10 3020 40
1.0
2.0
8
15
55
16
1
2.5
50
30
Power Inductors
Performance Characteristics (Reference 2) ● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP4M330KVK ]
DC Bias (A)0 1 32
0
20
40
80
[ ETQP4M6R8KVK ]
[ ETQP4M1R5KVK ]
DC Bias (A)
DC Bias (A)
0 2 64
60
Tem
pera
ture
ris
e Δ
T(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
4 5
8 10
[ ETQP4M220KVK ]
[ ETQP4M4R7KVK ]
[ ETQP4M1R0KVK ]
[ ETQP4M150KVK ]
[ ETQP4M3R3KVK ]
[ ETQP4MR68KVK ]
[ ETQP4M100KVK ]
[ ETQP4M2R2KVK ]
Tem
pera
ture
ris
e ΔT
(K)
0 1 320
20
40
80
0 84
0 5 15
60Te
mpe
ratu
re r
ise
ΔT(K
)Te
mpe
ratu
re r
ise
ΔT(K
)
0
20
40
80
60
0
20
40
80
60
4 5
12
Tem
pera
ture
ris
e ΔT
(K)
0 20
20
40
80
0 4
0 10 20
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
4 6
8 12
Tem
pera
ture
ris
e (Δ
TK)
0 420
20
40
80
0 84
60
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
6 8
12 16
6
302520100 5 15 252010
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A) DC Bias (A)
DC Bias (A) DC Bias (A)
31
Power Inductors
4. Series PCC-M1040M-LP (ETQP4M□□□KVC)
ETQP4M470KVC 1ETQP4M330KVC 1ETQP4M220KVC 1ETQP4M150KVC 1ETQP4M100KVC 1ETQP4M6R8KVC 1ETQP4M4R7KVC 1ETQP4M3R3KVC 1ETQP4M2R2KVC 1ETQP4M1R5KVC 1ETQP4M1R0KVC 1*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 10.7×10.0×4.0 mm case size. See also ✽5*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.▲ ETQP4M4R7KVC Under development (Start of mass production: the 2nd half of 2019) Please contact us for customized part no.
Performance Characteristics (Reference 1) ● Inductance vs DC Current
▲ Under development
17.4 25.01.00 2.60 (2.86) 19.6 23.9 34.6
11.2 13.93.30 9.40 (10.34) 10.3 12.6 17.1
7.6 10.86.80 18.50 (20.35) 7.4 8.9 12.1
4.1 5.0 7.415.00 37.00 (40.70) 5.2 6.3 9.2
3.4 4.2 5.647.00
±20
132.00 (145.20)
±10
2.8
22.00 60.00 (66.00)
1.50 4.90 (5.39) 14.3
4.70 11.80 (12.98) 9.2
PCC-M1040M-LP[10.7×10.0×4.0(mm)]
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
2.20 6.80 (7.48) 12.1 14.8 21.0
10.00 25.40 (27.94) 6.3
3.4 4.733.00 84.60 (93.06)
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A) MSL
Level△T=40K Series△L=–30%L0
(μH)Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4 *5
Indu
ctor
s(μ
H)
[ ETQP4M470KVC ]
DC Bias (A)0 4 620
10
20
30
[ ETQP4M100KVC ]
[ ETQP4M2R2KVC ]
Indu
ctor
s(μ
H)
DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
0
12
0 4 128 20
0 3010 200
0.5
1.0
1.5
4
8
40
2.5
50
40
16
2.0
Indu
ctor
s(μ
H)
[ ETQP4M330KVC ]
DC Bias (A)0 6 1020
10
20
30
[ ETQP4M6R8KVC ]
[ ETQP4M1R5KVC ]
Indu
ctor
s(μ
H)
DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
0
8
0 5 1510 25
0 3010 200
0.5
1.0
1.5
4
6
40
20
2.0
Indu
ctor
s(μ
H)
[ ETQP4M220KVC ]
DC Bias (A)0 8 1240
5
10
15
[ ▲ETQP4M4R7KVC ]
[ ETQP4M1R0KVC ]
Indu
ctor
s(μ
H)
DC Bias (A)
Indu
ctor
s(μ
H)
DC Bias (A)
0
5
0 10 30
0 3010 200
0.4
0.8
1.2
2
3
40
25
20
20
Indu
ctor
s(μH
)[ ETQP4M150KVC ]
DC Bias (A)0 12 1680
5
10
[ ETQP4M3R3KVC ]
Indu
ctor
s(μ
H)
DC Bias (A)
0
3.0
0 10 30
2.0
1.0
20
15
20
8 4 8 4
2
4
1
50 50 60
32
Power Inductors
Performance Characteristics (Reference 2) ● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
▲ Under development
Should a safety concern arise regarding this product, please be sure to contact us immediately.Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before
01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
[ ETQP4M470KVC ]
DC Bias (A)0 1 32
0
20
40
80
[ ETQP4M100KVC ]
[ ETQP4M2R2KVC ]
DC Bias (A)
DC Bias (A)
0 2 64
0 10 20
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
4 5
8 10 12
[ ETQP4M330KVC ]
[ ETQP4M6R8KVC ]
[ ETQP4M1R5KVC ]
[ ETQP4M220KVC ]
[ ▲ETQP4M4R7KVC ]
[ ETQP4M1R0KVC ]
[ ETQP4M150KVC ]
[ ETQP4M3R3KVC ]
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)0 1 32
0
20
40
80
DC Bias (A)
DC Bias (A)
0 4
0 10 20
60Te
mpe
ratu
re r
ise
ΔT(K
)Te
mpe
ratu
re r
ise
ΔT(K
)
0
20
40
80
60
0
20
40
80
60
4 5
8 12
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)0 42
0
20
40
80
DC Bias (A)
DC Bias (A)
0 4
0 10 20
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
0
20
40
80
60
6 8
8 12 16
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)0 420
20
40
80
DC Bias (A)0 4
60
Tem
pera
ture
ris
e ΔT
(K)
0
20
40
80
60
6 8
8 12 16
6
30
33
Power Inductors
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before
Series PCC-M0530M-LP Series PCC-M0630M-LP(ETQP3M□□□KVP) (ETQP3M□□□KVN)
(ETQP4M1R0KVC)
Series PCC-M0840M-LP Series PCC-M1040M-LP(ETQP4M□□□KVK) (ETQP4M□□□✽KVC) ✽Exemption 1R0
Series PCC-M1040M-LP
SuffixInductance
PolarityDate Code
5.5±0.4
1.0±0.4 1.0±0.4
2.54
±0.
3
5.0±
0.4
3.0
max
.
0.05 min.
SuffixInductance
PolarityDate Code
6.4±0.4
1.04±0.4 1.04±0.4
3.18
±0.
3
6.0±
0.4
3.0
max
.
0.05 min.
SuffixInductance
PolarityDate Code
8.5±0.4
1.3±0.4 1.3±0.4
5.08
±0.
3
8.0±
0.4
4.0
max
.
0.05 min.
SuffixInductance
PolarityDate Code
10.7±0.4
2.08±0.4 2.08±0.4
3.0±
0.3
10.0
±0.
4
4.0
max
.
0.05 min.
SuffixInductance
PolarityDate Code
10.7±0.4
2.15±0.5 2.15±0.5
4.7±
0.3
10.0
±0.
4
4.0
max
.
0.05 min.
34
Power Inductors
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Series PCC-M0530M-LP Series PCC-M0630M-LP Series PCC-M0840M-LP (ETQP3M□□□KVP) (ETQP3M□□□KVN) (ETQP4M□□□KVK)
Series PCC-M1040M-LP Series PCC-M1040M-LP (ETQP4M□□□✽KVC)✽Exemption 1R0 (ETQP4M1R0KVC)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
7.06.0
9.0
11.0
5.33
4
3.25
4
4.95
3
11.0
2.79
6.5
2.946
6.756
7.4
3.429
8.255
9.5
4.826
9.652
11.711.7
5.842
12.192
5.187
12.065
3.42
9
35
Power Inductors
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
● Taping Reel Dimensions in mm (not to scale)
Component Placement (Taping)
Standard Packing Quantity/Reel
Series A B W E t2
PCC-M0530M-LP 5.6 6.1 16 1.75 7.5 8 2 4F P1 P2 P0 φD0 t1
1.5 0.3
0.41.5 0.51.5
6.35
3.3PCC-M0630M-LP 6.5 7.1 16 1.75 7.5 8 2 4 1.5 0.3 3.3
16 2
W
17.5PCC-M0630M-LPPCC-M0840M-LP
PCC-M0840M-LP 8.63 9.1 16 1.75 6.0PCC-M1040M-LP 10.65 11.75 24 1.75 11.5 4
7.5 12 2 4
2
Series A B C D EPCC-M0530M-LP
330 (100) 13 21
4,000 pcs / box(2 reel)
1,000 pcs / box(2 reel)
2,000 pcs
500 pcs
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
PCC-M1040M-LP 25.5
Part No. Quantity per reelMinimum Quantity / Packing UnitSeriesPCC-M0530M-LPPCC-M0630M-LPPCC-M0840M-LPPCC-M1040M-LP
ETQP3M□□□KVPETQP3M□□□KVNETQP4M□□□KVKETQP4M□□□KVC
F
φD0 E
W
t1t2P2 P0
P1
A
B
A
E
D
W
B
C
Term
inal
Tape running direction
36
Power Inductors
Power Choke Coil (Automotive Grade)Series : PCC-M0648M-LE
PCC-M0748M-LE
High heat resistance and high reliability using metal composite core (MC)
Industrial Property : patents 3 (Registered 2/Pending 1)
●Low loss (Low DC resistance)●High heat resistance : Operation up to 150 °C including self-heating●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous applications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 1,000 pcs/box (2 reel)
Explanation of Part Numbers
Temperature rating Operating temperature range
Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
4R7220
4.7 μH22 μH
Features
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01 Feb. 2020Should a safety concern arise regarding this product, please be sure to contact us immediately.
Size□ 6 mm□ 7 mm
CodeNM
→→
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P M K FProduct Code Height Winding Inductance Suffix SizeCoreClassification
37
Power Inductors
1. Series PCC-M0648M-LE (ETQP4M□□□KFN)
ETQP4M3R3KFN 1ETQP4M4R7KFN 1ETQP4M100KFN 1ETQP4M150KFN 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 30 K/W measured on 6.4×6.0×4.8 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference①)● Inductance vs DC Current
MSLLevel△T=40K
PCC-M0648M-LE[6.4×6.0×4.8(mm)]
Series△L=–30%
*5
9.2 12.07.3 9.3
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A)
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
4.1 5.2 8.115.00 63.80 (70.18) 3.3 4.2 6.7
3.30
±20
13.10 (14.41)
±10
7.24.70 20.70 (22.77) 5.710.00 40.40 (44.44)
Indu
ctor
s(μ
H)
[ ETQP4M3R3KFN ]
2 64 80
[ ETQP4M100KFN ]
Indu
ctor
s(μ
H)
DC Bias (A)
1 3
14
5
16
Indu
ctor
s(μ
H)
[ ETQP4M4R7KFN ]
[ ETQP4M150KFN ]
Indu
ctor
s(μ
H)
DC Bias (A)
0 2 64 8
120
4
3
10
1
2
10
7 9
DC Bias (A) DC Bias (A)
0
86
24
1210
0
43
1
2
56
0
4
20
12
8
16
2 64 80 14 161210
2 64 80 14 161210
38
Power Inductors
Performance Characteristics (Reference②)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
eΔT
(K)
DC Bias (A)
0
20
40
80
DC Bias (A)
60
Tem
pera
ture
ris
eΔT
(K)
Tem
pera
ture
ris
eΔT
(K)
Tem
pera
ture
ris
eΔT
(K)
DC Bias (A)
71 3 2 45 6
DC Bias (A)
[ ETQP4M3R3KFN ]
[ ETQP4M100KFN ]
[ ETQP4M4R7KFN ]
[ ETQP4M150KFN ]
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 2 64 8
0 2 64 8 10 12 14 0 2 64 8 10 12
1 3 50
39
Power Inductors
2. Series PCC-M0748M-LE (ETQP4M□□□KFM)
ETQP4M4R7KFM 1ETQP4M100KFM 1ETQP4M220KFM 1ETQP4M470KFM 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 30 K/W measured on 7.4×7.0×4.8 mm case size. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference①)● Inductance vs DC Current
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)Rated Current (Typ. : A)
Series△T=40K △L=–30%
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%) *2 *3 *4
MSLLevel
*5
10.7PCC-M0748M-LE
[7.4×7.0×4.8(mm)]10.00 36.00(39.60) 4.5 6.0 9.622.00 84.10(92.51) 2.9
4.70
±20
16.80(18.48)
±10
6.5 8.8
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
4.647.00 148.60(163.46) 2.2 2.9 3.7
3.9
Indu
ctor
s(μ
H)
[ ETQP4M4R7KFM ]
2 64 80
[ ETQP4M220KFM ]
Indu
ctor
s(μ
H)
DC Bias (A)
1 3
14
5
16
Indu
ctor
s(μ
H)
[ ETQP4M100KFM ]
Indu
ctor
s(μ
H)
DC Bias (A)
0 2 64 8
120
4
3
12
10
7
DC Bias (A) DC Bias (A)
05
15
10
0
8
6
2
4
1012
0
2 64 80 14 161210
56
1 3 50 2 4
25
20
30
10
20
30
40
50[ ETQP4M470KFM ]
40
Power Inductors
Performance Characteristics (Reference②)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
0
20
40
80
DC Bias (A)
60
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
71 3 2 45 6
DC Bias (A)
[ ETQP4M4R7KFM ]
[ ETQP4M220KFM ]
[ ETQP4M100KFM ]
[ ETQP4M470KFM ]
0
20
40
80
60
0
20
40
80
60
0
20
40
80
60
0 2 64 8
0 2 64 8 10 12 14 0 2 64 8 10 12
1 3 50 7
41
Power Inductors
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
(ETQP4M□□□KFN) (ETQP4M□□□KFM)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Series PCC-M0648M-LE Series PCC-M0748M-LE (ETQP4M□□□KFN) (ETQP4M□□□KFM)
Series PCC-M0648M-LE
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Series PCC-M0748M-LE
6.4±0.4
1.6±0.4
2.0±
0.2
6.0±
0.4
4.8
max
.
2.0±
0.2
7.0±
0.4
7.4±0.4
1.6±0.4 1.6±0.4 1.6±0.4
4.8
max
.
0.05
min
.
0.05
min
.
7.4 8.4
2.2
2.2
7.0
8.0
7.42.0
8.43.0
SuffixInductance
PolarityDate Code PolarityDate Code
SuffixInductance
42
Power Inductors
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
● Taping Reel Dimensions in mm (not to scale)
Component Placement (Taping)
Standard Packing Quantity/Reel
5.0t2
PCC-M0648M-LE 6.6 7.1 16 1.75 7.5 12 2 4F P1 P2 P0 φD0 t1
7.5 12 2 41.5 0.4
Series A B W E
PCC-M0748M-LE 7.6 8.1 16 1.75
E W
1.5 0.4 6.0
Series A B C D
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
PCC-M0748M-LE2 17.5
Quantity per reel
PCC-M0648M-LE330 (100) 13 21
Serise Part No. Minimum Quantity/ Packing Unit
500 pcsPCC-M0648M-LEPCC-M0748M-LE
ETQP4M□□□KFNETQP4M□□□KFM
1,000 pcs / box(2 reel)
F
φD0 E
W
t1t2P2 P0
P1
A
B
A
E
φDW
B
C
Tape running direction
Term
inal
43
Power Inductors
Power Choke Coil (Automotive Grade)Series : PCC-M0530M-H
PCC-M0630M-H
High heat resistance and high reliability using metal composite core (MC)
●Reduce core loss in high frequency band (More than 2 MHz)●High heat resistance : Operation up to 150 °C including self-heating●Low profile : 3mm max. height●SMD type●High-reliability : High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous applications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material●Temp. stability : Excellent inductance stability over broad temp. range●Low audible (buzz) noise : A gapless structure achieved with metal composite core●High efficiency : Low DC resistance of winding and low eddy-current loss of the core●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ●Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability●Boost-Converter, Buck-Converter DC/DC
Standard Packing Quantity (Minimum Quantity/Packing Unit) ● 2,000 pcs/box (2 reel)
Explanation of Part Numbers
Temperature rating
Features
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01 Feb. 2020Should a safety concern arise regarding this product, please be sure to contact us immediately.
Size□ 5 mm□ 6 mm
CodePN
2.2 μH10 μH
→→
Operating temperature range
2R2100
Ta : -5 ℃ to +35 ℃ 85%RH max.Storage condition After PWB mountingBefore PWB mounting
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P M H FProduct Code Height Winding Inductance Suffix SizeCoreClassification
44
Power Inductors
Series PCC-M0530M-H/PCC-M0630M-H (ETQP3M□□□HFP/ETQP3M□□□HFN)
ETQP3M2R2HFP 1
ETQP3M100HFN 1ETQP3M220HFN 1
*1: Measured at 100 kHz*2: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. See also ✽5
*3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 20 K/W measured. See also (✽5)*4: Saturation rated current : DC current which causes L(0) drop –30 %.*5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used.*6: Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C
should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Performance Characteristics (Reference①)● Inductance vs DC Current
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
4.03.0 3.7
[6.5×6.0×3.0(mm)]2.1 2.568.0 (74.8)
144.0 (158.4)
±20PCC-M0630M-H
5.2 6.3 PCC-M0530M-H[5.5×5.0×3.0(mm)]
Standard Parts
Part No.Inductance *1 DCR (at 20 ℃)
(mΩ)
L0(μH)
Tolerance
(%) Typ. (max.) Tolerance
(%)
22.0
±20
*2 *3Series
Rated Current (Typ. : A) MSLLevel△T=40K △L=–30%
*4 *5
9.0
5.5
19.5 (21.45)2.2
10.0
Indu
ctor
s(μ
H)
[ ETQP3M2R2HFP ]
2 64 80
Indu
ctor
s(μ
H)
DC Bias (A)
14
Indu
ctor
s (μ
H)
[ ETQP3M100HFN ]
DC Bias (A)
120
8
6
10
12
2
4
10
DC Bias (A)
1 3 50 2 64 87 9
1 3 50 2 64 87
0.5
0
10
15
0
5
20
25
1.5
1.0
2.5
2.0
[ ETQP3M220HFN ]
45
Power Inductors
Performance Characteristics (Reference②)● Case Temperature vs DC Current
PWB condition A : Four-layer PWB (1.6 mm FR4), See also ✽2PWB condition B : Multilayer PWB with high heat dissipation performance. See also ✽3
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Tem
pera
ture
ris
e ΔT
(K)
DC Bias (A)
DC Bias (A)
0
20
40
80
60
Tem
pera
ture
ris
e Δ
T(K)
0
20
40
80
60
Tem
pera
ture
ris
e Δ
T(K)
DC Bias (A)1 3 50 2 64 8
[ ETQP3M2R2HFP ]
[ ETQP3M22HFN ]
[ ETQP3M100HFN ]
0
20
40
80
60
7 1 3 50 2 64
1 30 2 4
46
Power Inductors
Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±0.5
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
※Don't wire on the pattern on shaded portion the PWB.
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
(ETQP3M□□□HFP) (ETQP3M□□□HFN)
Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Series PCC-M0530M-H Series PCC-M0630M-H (ETQP3M□□□HFP) (ETQP3M□□□HFN)
Series PCC-M0530M-H
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Series PCC-M0630M-H
5.5±0.4 6.5±0.4
5.0±
0.4
6.0±
0.4
1.2±0.4 1.2±0.4
3.0±
0.3
3.0
max
.
0.05
min
.
1.5 1.5
3.0±
0.3
3.0
max
.
0.05
min
.
SuffixInductance
PolarityDate Code
SuffixInductance
PolarityDate Code
6.1
3.6
6.0
7.2
2.2
7.13.
6
7.0
8.8
2.8
47
Power Inductors
Packaging Methods (Taping) ● Embossed Carrier Tape Dimensions in mm (not to scale)
● Taping Reel Dimensions in mm (not to scale)
Component Placement (Taping)
Standard Packing Quantity/Reel
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
1,000 pcs
Quantity per reelMinimum Quantity/ Packing UnitPCC-M0530M-H PCC-M0630M-H
ETQP3M□□□HFPETQP3M□□□HFN
2,000 pcs / box(2 reel)
Serise Part No.
2 17.5
Series A B C D E WPCC-M0530M-H
330 (100) 13 21PCC-M0630M-H
3.3PCC-M0630M-H 7.1 6.6 16 1.75
Series A B W E t1
7.5 12 2 41.5 0.41.5 0.4
3.3t2
PCC-M0530M-H 5.6 6.1 16 1.75 7.5 12 2 4F P1 P2 P0 φD0
F
φD0 E
W
t1t2P2 P0
P1
A
B
Series PCC-M0530M-H SeriesPCC-M0630M-H
A
E
φDW
B
Tape running direction
Term
inal
C
48
Power Inductors
Power Choke Coil (Automotive Grade)Series : PCC-D1413H(DUST)
Realize high heat resistance, low loss and high reliability with dust core (DUST)
Industrial Property:patents 5 (Pending)
●High heat resistance : Operation up to 150 °C including self-heating●SMD and small package : L 14.7×W 13.2×H 13.1 mm●High-reliability : High vibration resistance as result of newly developed integral construction ;
under severe reliability conditions of automotive and other strenuous applications
●High bias current : Excellent inductance stability using ferrous alloy magnetic material●High Vibration proof : 5 Hz to 2 kHz/30 G●High efficiency : Achieve by Low loss Dust core and Edgewise coil with rectangular wire●Shielded construction●AEC-Q200 compliant●RoHS compliant
Recommended Applications ● Driver circuits of fuel injection systems in automotive, driver circuits of diesel common rail injection,
step-up power supplies for motor driver-circuits
● 600 pcs /10 tray
Explanation of Part Numbers
Temperature rating
✽1: Measured at 100 kHz.✽2: Reference Only.✽3: DC current which causes temperature rise of 40K. Parts are soldered by reflow on four-layer PWB(1.6 mm FR4) and measured at room temperature. ※ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.01 Feb. 2020Should a safety concern arise regarding this product, please be sure to contact us immediately.
Standard Parts
Tc : -40 ℃ to +150 ℃ (Including self-temperature rise)Operating temperature range
Ta : -5 ℃ to +35 ℃ 85%RH max.
△T=40K (A)L0 at 0A (μH) L1 at 10A (μH)
Inductance✽1
Features
Standard Packing Quantity
Storage condition After PWB mountingBefore PWB mounting
6.9ETQPDH240DTV 36.0±30 % (24.0) ✽2 25.8 typ. 50.0 typ.
DCR ACR Rated Current ✽3
Part No. at 20 °C (mΩ) at 20 kHz (mΩ)
1 2 3 4 5 6 7 8 9 10 11 12
E T Q P H DProduct Code Height Winding Inductance Suffix SizeCoreClassification
49
Power Inductors
Performance Characteristics (Reference)● Inductance vs DC Current ● Case Temperature vs DC Current
Dimensions in mm (not to scale) ConnectionDimensional tolerance unless noted : ±0.5
✽None polar character
Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±0.5
RecommendResist opening area
✽ Due to bigger part, Thermal Capacity is large and may occure PWB temperature differences during reflow process.Recommended land pattern (Heat absorb) should
Recommend be designed with reflow mountablity.copper pad area
■ As for Soldering Conditions and Safety Precautions (Power Choke Coils (Automotive Grade)),Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
1.9
4.4
10.3510.35
20.6
5 8.
4
Indu
ctor
s(μ
H)
[ ETQPDH240DTV ]
2 64 80
DC Bias (A)1 314 516 0 2 64 812
0 010
510
10 7 9
Tem
pera
ture
ris
eΔT
(K)
[ ETQPDH240DTV ]
P2
P1
P1
P2
15
20
25
3035
40
4550
10
20
3040
50
60
7080
90100
2018
13.2±0.6
14.7
13.1
6.7
min
.
10.53
10.53 2.45
2.45
5.9
DC Bias (A)
SuffixInductance
Date Code
12.6
50
Power Inductors
● Blister Tray (mm) 60 pcs
● Blister Tray Dimention
ETQPDH240DTV
Standard Packing Quantity/Tray
15.1 19 18A B GFE
Component Placement (Tray)
Packaging Methods (Tray)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Quantity
Part No.152 262
ETQPDH240DTVPart No.
600 pcs /10 Tray (60 pcs / 1 Tray )
DC23 14.8
F
D
C
EB G
A
51
Power Inductors
Soldering Conditions
● Pb free solder recommended temperature profile Power Choke Coils (Automotive Grade)
ETQP3M◻◻◻HFNETQPDH◻◻◻DTV
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2020
Reflow soldering conditions
Time ofReflow
ETQP3M◻◻◻KVN ETQP4M◻◻◻KVK ETQP4M◻◻◻KVC
2 times max.
ETQP4M◻◻◻YFP ETQP3M◻◻◻YFN ETQP4M◻◻◻YFN ETQP5M◻◻◻YFM ETQP5M◻◻◻YGM ETQP5M◻◻◻YFKETQP5M◻◻◻YGK ETQP5M◻◻◻YFCETQP5M◻◻◻YGC
T3
ETQP4M◻◻◻KFN ETQP4M◻◻◻KFM ETQP3M◻◻◻HFP
ETQP5M◻◻◻YLC ETQP6M◻◻◻YLC ETQP5M◻◻◻YSK ETQP5M◻◻◻YSC ETQP8M◻◻◻JFA ETQP3M◻◻◻KVP
T3 LimitETQP3M◻◻◻YFP
150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s
Part No. Preheat Soldering Peak TemperatureT1 [°C] t1 [s] T2 [°C] t2 [s]
t1 t2
T1
T2T3
0
Tem
pera
ture
(°C
)
Time
52
Power Inductors
Safety Precautions(Common precautions for Power Choke Coils (Automotive Grade) : Series DUST, Series MC)
・ When using our products, no matter what sort of equipment they might be used for, be sure to make a writtenagreement on the specifications with us in advance. The design and specifications in this catalog are subject tochange without prior notice.
・ Do not use the products beyond the specifications described in this catalog.・ This catalog explains the quality and performance of the products as individual components. Be fore use, check and
evaluate their operations when installed in your products.・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other significant damage, such as damage tovehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingappliances, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
✽ Systems equipped with a protection circuit and a protection device.✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
■Precautions for use1. Provision to abnormal condition
This power choke coil itself does not have any protective function in abnormal condition such as overload,short-circuit and open-circuit conditions, etc.Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstandvoltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuitin the end product.
2. Temperature riseTemperature rise of power choke coil depends on the installation condition in end products. It shall be confirmedin the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.
3. Dielectric strengthDielectric withstanding test with higher voltage than specific value will damage Insulating material and shortenits life.
4. WaterThis Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation
5. PottingIf this power choke coil is potted in some compound, coating material of magnet wire might be occasionallydamaged. Please ask us if you intend to pot this power choke coil.
6. ModelWhen this power choke coil is used in a similar or new product to the original one, it might be unable to satisfyhe specifications due to difference of condition of usage.Please ask us if you use this power choke coil in the manner such as above.
7. DropIf the power choke coil receives mechanical stress such as drop, characteristics may become poor (due todamage on coil bobbin, etc.). Never use such stressed power choke coil.
8. Buzz NoiseWhen this coil is used in the frequency band of the audible range (≒ 20 Hz to 20 kHz), or, when using inburst mode, depending on the operating conditions (conditions of the energized waveform) sounds (buzz noise)may occur. Depending on the circuit / board installation environment it may be heard as abnormal sounds,so please check in advance.
9. Solvent (Series MC)If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylenesystem, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this powerchoke coil.
10. Static electricity measures (Series MC)① Circuit designPlease set up the ESD measures parts such as capacitors in the former steps of this power choke coil for staticelectricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.Moreover, please consult our company about such a case once.
01. Oct. 2019
strength becomes very low in such condition.
53
Power Inductors
② Treatment with singleTake countermeasures against static electricity when using single power choke coil. (process and equipment)There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to thispower choke coil. Please handle 200 V or less.
11. Printed circuit board design① Land pattern and Via which exceed Operating Voltage, should not be placed top layer PWB under the products
for keeping isolation between inside coil and surface of PWB. (Series DUST)② To the opposing part in this power choke coil bottom please install neither pattern nor the beer, etc. (Series MC)
③ Parts arranged around this power choke coil donot touch the surface of this power choke coil(Top side and side). (Series MC)
④ This power choke coil is different from the ferrite core-type that installs general concentration GAP.It has the leakage magnetic bunch distribution of the choke coil to the vertical direction. Please be cautiouswhen using parts and circuit compositions which are easily affected by the leakage flux.
12. Other using emviromentThis power choke coil is not designed for the use in the following, special environment.Therefore, please do not use it in the following special environment.
• Use in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.• Use in place where out-of-door exposure and direct sunshine strike.
13. Core Chipping and Core CrackThis choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stressfrom outside, and might have initially a partial chipping and/or cracks that do not affect the quality.
14. Keeping environmentIf this power choke coil is kept under following environment and condition, there is a possibility that theperformance and soldering decreases greatly.
• Keep in place where a lot of causticity gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox exist.• Keep in place where out-of-door exposure and direct sunshine strike.
■AEC-Q200 CompliantThe products are tested based on all or part of the test conditions and methods defined in AEC-Q200.Please consult with Panasonic for the details of the product specification and specific evaluation test results,etc., and please review and approve Panasonic's product specification before ordering.
<Package markings>Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.
01. Oct. 2019
(PWB)
The opposing part in the choke coil bottom
Side Top side
Side
The opposing part in the choke coil bottom
8.4
2.810
3.8 8
54
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
E
1 2
Q
3
P 3 L
4 5 6 7 8 9
Product Code InductanceClassification
10 11 12
SuffixPackagingCoreWindingSize
T
Explanation of Part Numbers
Features
Recommended Applications
● Small type (8.7×7.0×H3.0 mm)● High power (22 A)● Low loss (RDC :1.12 mΩ)● Tighter DCR tolerance (±7 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant
● Notebook PC power supply modules● Servers, Routers, DC/DC converters for driving CPUs
● 3,000 pcs./box (2 reel)
Power Choke Coil
Series : PCC-M0730L (MC)
Small mounting size for multi-phase DC/DC converter circuits
Standard Parts
Standard Packing Quantity (Minimum Quantity/Packing Unit)
(✽1) Inductance is measured at 1.0 MHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),
Method B (high heat dissipation measurement) is different from Method A by the measurement methods.In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition.
Part No.
Inductance (at 20 °C)✽1
Rated current
(A)✽2
Rated current
(ref)
(A)✽3
DC resistance
(at 20 °C)
(mΩ)
L0 at 0A L1 ✽4
(μH) (μH)
Measurement
current
(A)
ETQP3LR24CFM 0.24±20 % (0.19) 22 22 35 1.12±7 %
May. 201502
55
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
P2
P1
8.7 max.
3.0 max.
0.01 min.
7.0
±0.3
2.0
2.0
±0.3
P1 P2
2.8 3.6 2.8
2.6
0.00
0.05
0.10
0.15
0.20
0.30
0.25
0.35
0.40
0.45
0 5 10 15 20 25 30
(A)
(uH) ETQP3LR24CFM
0
10
20
30
40
50
60
70
80
90
100
0 5 10 2015 25 30
Idc (A)
Te
mp
. rise
(K
)
ETQP3LR24CFM
Connection
■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files
Recommended land patterns in mm (not to scale)
Performance Characteristics (Reference)
Dimensions in mm (not to scale)
Inductance vs DC Current Case Temperature vs DC Current (Method A)
May. 201502
56
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
E
1 2
Q
3
P 4 L
4 5 6 7 8 9
Product Code InductanceClassification
10 11 12
SuffixPackagingCoreWindingSize
T
Explanation of Part Numbers
Features
Recommended Applications
● Small type (8.7×7.0×H4.0 mm)● High power (17 A to 24 A)● Low loss (RDC :1.0 to 1.5 mΩ)● Tighter DCR tolerance (±7 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant
● Notebook PC power supply modules● Servers, Routers, DC/DC converters for driving CPUs
● 3,000 pcs./box (2 reel)
Power Choke Coil
Series : PCC-M0740L (MC) Low DCR Type
Small mounting size for multi-phase DC/DC converter circuits
Standard Parts
Standard Packing Quantity (Minimum Quantity/Packing Unit)
(✽1) Inductance is measured at 1.0 MHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),
Method B (high heat dissipation measurement) is different from Method A by the measurement methods.In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition.
Part No.
Inductance (at 20 °C)✽1
Rated current
(A)✽2
Rated current
(ref)
(A)✽3
DC resistance
(at 20 °C)
(mΩ)
L0 at 0A L1 ✽4
(μH) (μH)
Measurement
current
(A)
ETQP4LR24AFM 0.24±20 % (0.20) 24 24 35.5 1.00±7 %
ETQP4LR36AFM 0.36±20 % (0.30) 20 20 31.0 1.35±7 %
ETQP4LR42AFM 0.42±20 % (0.35) 17 17 28.5 1.50±7 %
May. 201504
57
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
P2
P1
8.7 max.
4.0 max.
0.01 min.
7.0
±0.3
2.0
A
P1 P2
2.8 3.6 2.8
B
0.00
0.05
0.10
0.15
0.20
0.30
0.25
0.35
0.40
0.45
0 5 10 15 20 25 30
(A)
(uH)ETQP4LR36AFMETQP4LR24AFM
0
10
20
30
40
50
60
70
80
90
100
0 5 10 2015 25 30
Idc (A)
Tem
p. rise
(K
)
ETQP4LR42AFMETQP4LR36AFMETQP4LR24AFM
ETQP4LR42AFM
Connection
■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files
Recommended land patterns in mm (not to scale)
Performance Characteristics (Reference)
Dimensions in mm (not to scale)
Inductance vs DC Current Case Temperature vs DC Current (Method A)
Part No. A
ETQP4LR24AFM 3.0±0.3
ETQP4LR36AFM2.0±0.3
ETQP4LR42AFM
Part No. B
ETQP4LR24AFM 3.6
ETQP4LR36AFM2.6
ETQP4LR42AFM
May. 201504
58
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
E
1 2
Q
3
P 4 L
4 5 6 7 8 9
Product Code InductanceClassification
10 11 12
SuffixPackagingCoreWindingSize
T
Explanation of Part Numbers
Features
Recommended Applications
● Small type (11.5×10.0×H4.0 mm)● High power (21 A to 28 A)● Low loss (RDC :0.7 to 1.56 mΩ)● Tighter DCR tolerance (±5 % to ±10 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant
● Servers, Routers, DC/DC converters for driving CPUs● Notebook PC power supply modules
● 2,000 pcs./box (2 reel) : ETQP4LR36WFC, ETQP4LR56WFC, ETQP4LR45XFC● 1,000 pcs./box (2 reel) : ETQP4LR19WFC
Power Choke Coil
Series : PCC-M1040L (MC)
Small mounting size for multi-phase DC/DC converter circuits
Standard Parts
Standard Packing Quantity (Minimum Quantity/Packing Unit)
(✽1) Inductance is measured at 100 kHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),
Method B (high heat dissipation measurement) is different from Method A by the measurement methods.In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition.
Part No.
Inductance (at 20 °C)✽1
Rated current(A)✽2
Rated current
(ref)(A)✽3
DC resistance(at 20 °C)
(mΩ)
L0 at 0A L1 L2 (Reference)✽4
(μH) (μH)Measurement
current(A)
(μH)Measurement
current(A)
ETQP4LR19WFC (0.20) 0.19±20 % 21 (0.17) 30 28 38 0.70±10 %
ETQP4LR36WFC (0.37) 0.36±20 % 17 (0.34) 24 24 33 1.10± 5 %
ETQP4LR56WFC (0.60) 0.56±20 % 15 (0.53) 21 21 28 1.56± 5 %
ETQP4LR45XFC 0.45+20% — — (0.38) 25 25 33 1.10± 5 %–25%
May. 201505
59
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
P2
P1
11.5 max.
4.0 max.
0.01 min.
10.0
±0.3
2.5
4.0
±0.2
P1 P2
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
(A)
(uH)
ETQP4LR56WFCETQP4LR36WFCETQP4LR19WFCETQP4LR45XFC
0
10
20
30
40
50
60
70
80
90
100
0 5 10 15 20 25 30
Idc (A)
Tem
p. rise
(K
)
ETQP4LR56WFC
ETQP4LR36WFC / ETQP4LR45XFC
ETQP4LR19WFC
3.8 6.0 3.8
4.6
Connection
■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files
Performance Characteristics (Reference)
Dimensions in mm (not to scale)
Inductance vs DC Current Case Temperature vs DC Current (Method A)
Recommended land patterns in mm (not to scale)
May. 201506
60
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
E
1 2
Q
3
P 4 L
4 5 6 7 8 9
Product Code InductanceClassification
10 11 12
SuffixPackagingCoreWindingSize
T
Explanation of Part Numbers
Features
Recommended Applications
● Small type (11.7×10.0×H4.0 mm)● High power (21 A to 30 A)● Low loss (RDC :0.76 to 1.58 mΩ)● Tighter DCR tolerance (±5 %)● Suitable for high frequency circuit (up to 1 MHz)● Low buzz noise due to its gap-less structure● Shielded construction
● RoHS compliant
● Notebook PC power supply modules● Servers, Routers, DC/DC converters for driving CPUs
● 2,000 pcs./box (2 reel)
Power Choke Coil
Series : PCC-M1040L (MC) Low DCR Type
Small mounting size for multi-phase DC/DC converter circuits
Standard Parts
Standard Packing Quantity (Minimum Quantity/Packing Unit)
(✽1) Inductance is measured at 1.0 MHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method A)(✽3) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K. (Method B)(✽4) Reference only(✽5) Method A (PANASONIC's standard measurement conditions),
Method B (high heat dissipation measurement) is different from Method A by the measurement methods.In normal application condition, the part's temperature depends on circuit design and heat dissipation condition. This condition shall be verified by the worst operational condition.
Part No.
Inductance (at 20 °C)✽1
Rated current
(A)✽2
Rated current
(ref)
(A)✽3
DC resistance
(at 20 °C)
(mΩ)
L0 at 0A L1 ✽4
(μH) (μH)
Measurement
current
(A)
ETQP4LR36AFC 0.36±20 % (0.29) 30 30 40 0.76±5 %
ETQP4LR68XFC 0.68±20 % (0.59) 21 21 28 1.58±5 %
Dec. 201705
61
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
P2
P1
11.7 max.
4.0 max.
0.01 min.
10.0
±0.3
2.5
4.0
±0.3
P1 P2
3.8 6.0 3.8
4.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 5 10 15 20 25 30 35 40
(A)
(uH)ETQP4LR36AFCETQP4LR68XFC
0
10
20
30
40
50
60
70
80
90
100
0 5 10 2015 25 30 35 40
Idc (A)
Tem
p. rise
(K
)
ETQP4LR36AFCETQP4LR68XFC
Connection
■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files
Performance Characteristics (Reference)
Dimensions in mm (not to scale)
Recommended land patterns in mm (not to scale)
Inductance vs DC Current Case Temperature vs DC Current (Method A)
Dec. 201705
62
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
E
1 2
Q
3
P 5 L
4 5 6 7 8 9
Product Code InductanceClassification
10 11 12
SuffixPackagingCoreWindingSize
T
Explanation of Part Numbers
Features
Recommended Applications
● High power (25 A to 30 A)● Low loss (RDC :0.8 to 1.1 mΩ)● Narrow RDC tolerance (±5 % to ±7 %)● Low profi le (14.5×12.5×H5.0 mm)● High frequency (up to 1 MHz)● Low buzz noise due to its gap-less structure● RoHS compliant
● Servers, Routers, DC/DC converters for driving CPUs● Notebook PC power supply modules
● 1,000 pcs./box (2 reel)
Power Choke Coil
Series : PCC-M1250L (MC)
High power, Low loss, Low-profi le
Standard Parts
Standard Packing Quantity (Minimum Quantity/Packing Unit)
Part No.
Inductance (at 20 °C)✽1
Rated current(A)
✽2
DC resistance(at 20 °C)
(mΩ)
L1 L2 (Reference)
(μH)Measurement
current(A)
(μH)Measurement
current(A)
ETQP5LR50XFA 0.50±20 % 30 (0.46) 42 30 0.80±7 %
ETQP5LR60XFA 0.60±20 % 30 (0.54) 42 27 1.10±5 %
(✽1) Inductance is measured at 100 kHz.(✽2) Rated current defines actual value of DC current, when temperature rise of coil becomes 40 K.
Oct. 201403
63
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
ETQP5LR50XFA
ETQP5LR60XFA
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0 5 10 15 20 25 30 35 40
IDC (A)
(uH)
ETQP5LR60XFA
ETQP5LR50XFA
0
10
20
30
40
50
60
70
80
90
100
0 5 10 15 20 25 30 35 40 45IDC (A)
Tem
p. rise
(K
)
P2P1
14.5 max.
5.0 max. (2.5)
0.01 min.
12.5
±0.3
4.0
±0.2
3.8
4.6
8.73.8
P2
P1
Connection
■ As for Packaging Methods, Soldering Conditions and Safety Precautions(Power Choke Coils for Consumer use),Please see Data Files
Performance Characteristics (Reference)
Dimensions in mm (not to scale)
Recommended land patterns in mm (not to scale)
Inductance vs DC Current Case Temperature vs DC Current
Oct. 201403
64
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
t1t2P0
A
P2fD0
P1
FE
W
B
Tape running direction
EC
D
A
B
W
Series M0730L/M0740L/M1040L/
M1250L
Power Choke Coils for consumer use
● Taping Reel Dimensions in mm (not to scale)
● Embossed Carrier Tape Dimensions in mm (not to scale)
Series A B W E F P1 P2 P0 fD0 t1 t2
PCC-M0730L 7.6 8.916.0
1.75
7.5 12.0
2.0 4.0 1.5 0.4
4.2
PCC-M0740L 7.6 8.9 4.3
PCC-M1040L 10.6 11.824.0 11.5 16.0
5.2
PCC-M1250L 13.1 14.8 5.3
Series A B C D E WPCC-M0730L/M0740L
380 80 13 21 2
17.5PCC-M1040L
25.4PCC- M1250L
Series Part No. Minimum Quantity / Packing Unit Quantity per reel
PCC-M0730L ETQP3L◻◻◻CFM3,000 pcs. / box (2 reel) 1,500 pcs.
PCC-M0740L ETQP4L◻◻◻AFM
PCC-M1040L
ETQP4L◻◻◻WFC
ETQP4L◻◻◻XFC
ETQP4L◻◻◻AFC
2,000 pcs. / box (2 reel) 1,000 pcs.
PCC-M1040L ETQP4LR19WFC1,000 pcs. / box (2 reel) 500 pcs.
PCC-M1250L ETQP5L◻◻◻XFA
Power Choke Coils for consumer use
● Power Choke Coils for consumer use
● Power Choke Coils for consumer use
Packaging Methods (Taping)
Standard Packing Quantity/Reel
Standard Packing Quantity/Reel
Dec. 201710
65
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Power Inductors
t2
Tem
pe
ratu
re (
°C)
Time
T3
T2
T1
t1
0
Soldering Conditions
● Pb free solder recommended temperature profi le
Power Choke Coils for consumer use
Refl ow soldering conditions
SeriesPreheat Soldering Peak Temperature Time of
Refl owT1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit
PCC-M0730LPCC-M0740LPCC-M1040LPCC-M1250L
150 to 170 60 to 120 230 °C 30 to 40 250 °C, 5 s 260 °C, 10 s 2 times max.
Dec. 201710
66
Power Inductors
Safety Precautions(Common precautions for Power Choke Coils for consumer use)・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject tochange without prior notice.
・ Do not use the products beyond the specifications described in this catalog.・ This catalog explains the quality and performance of the products as individual components. Be fore use, check and
evaluate their operations when installed in your products.・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other significant damage, such as damage tovehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingappliances, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
✽ Systems equipped with a protection circuit and a protection device.✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault.
Precautions for use1. Provision to abnormal condition
This power choke coil itself does not have any protective function in abnormal condition such as overload,short-circuit and open-circuit conditions, etc.Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstandvoltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuitin the end product.
2. Temperature riseTemperature rise of power choke coil depends on the installation condition in end products. It shall be confirmedin the actual end product that temperature rise of power choke coil is in the limit of specified temperature class.
3. Dielectric strengthDielectric withstanding test with higher voltage than specific value will damage Insulating material and shortenits life.
4. WaterThis Power choke coil must not be used in wet condition by water, coffee or any liquid because insulationstrength becomes very low in such condition.
5. PottingIf this power choke coil is potted in some compound, coating material of magnet wire might be occasionallydamaged. Please ask us if you intend to pot this power choke coil.
6. SolventIf this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylenesystem, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this powerchoke coil.
7. Static electricity measures① Circuit designPlease set up the ESD measures parts such as capacitors in the former steps of this power choke coil for staticelectricity when there is a possibility that static electricity is impressed to the choke coil on the circuit.Moreover, please consult our company about such a case once.② Treatment with singleTake countermeasures against static electricity when using single power choke coil. (process and equipment)There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to thispower choke coil. Please handle 200 V or less.
01. Oct. 2019
67
Power Inductors
8. Core Chipping and Core CrackThis choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stressfrom outside, and might have initially a partial chipping and/or cracks that do not affect the quality.
9. Storage temperature-5 °C to +35 °C
10. Operating temperatureMinimum temperature: ‒40 °C(Ambient temperature of the power choke coil)Maximum temperature: 130 °C(Ambient temperature of the power choke coil plus the temperature rise)
100 °C(Only series : PCC‒F126F(N6))
11. ModelWhen this power choke coil is used in a similar or new product to the original one, it might be unable to satisfyhe specifications due to difference of condition of usage.Please ask us if you use this power choke coil in the manner such as above.
7. DropIf the power choke coil receives mechanical stress such as drop, characteristics may become poor (due todamage on coil bobbin, etc.). Never use such stressed power choke coil.
<Package markings>Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.
01. Oct. 2019
68
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Voltage Step-up Coils
(3.1) 1.2±0.1
5.5±0.2
1.5±
0.1
0.18
±0.
05
3.3
±0.2
1.2
±0
.1
3.3±0.1
0.6±
0.1
0.85
±0.
10
1
2
3
4
5
(3.3) 1.1±0.2
5.5±0.2
1.65
±0.
20
0.18
±0.
05
0.25
±0.
05
3.3
±0.2
3.3±0.1
0.6±
0.1
0.85
±0.
10
1
2
3
4
5
1.2
±0
.1
(3.3) 1.1±0.2
5.5±0.2
1.4±
0.2
0.18
±0.
05
0.12
5±0.
050
3.3
±0.2
1.2
±0
.1
3.3±0.1
0.6±
0.1
0.85
±0.
10
1
2
3
4
5
(3.1) 1.2±0.1
5.5±0.2
2.0
±0.2
0.18
±0.
05
3.3
±0.2
1.2
±0
.1
3.3±0.1
0.6±
0.1
0.85
±0.
10
1
2
3
4
5
(3.1)4.5±0.2
3.3±0.1
f3.1
±0.2
0.1
0±
0.0
5
3.1
±0.2
1.4
max
.1.2
±0.1 0.8
±0.1
1
2
3
4
5
E
1
L
2
T
3
3
4
K
5
N
6
0
7
0
8
4
9
B
C
f180 Reel
f370 Reel
Product Code Outer size Construction Design No. Packaging
C
10
1.1±
0.1
0.1
0±
0.0
5
3.1
±0.2
2.5
±0.1
1.2
±0.1 0
.8±
0.1
4.5±0.23.3±0.1
2.73±0.10
1
6
4
5
2
Explanation of Part Numbers
Features
Recommended Applications
Standard Packing Quantity
Dimensions in mm (not to scale)
● Small and thin● High inductance● RoHS compliant
● Piezoelectric buzzer, Booster circuit for EL backlight (Watch, Electric thermometer, Portable device)● HAC inductor (Smartphone, Cellular phone)
● 1,000 or 5,000 pcs./reel
Voltage Step-up Coils
Series : ChipType : 3KN
ELT3KN
Part Name: 1 Core 2 Terminal 3Ring 4 Coil 5 Terminal board 6 Adhesive
● Type 3KN
A
B
C
D
E
H
High inductance Voltage Step-up coil chip series forpiezoelectric buzzers and DC/DC circuitry of EL panels
Oct. 201403
69
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Voltage Step-up Coils
Standard Parts
“□” shows the packaging specifications.
Part No.Inductance R. D. C I.D.C
(mA) max.Dimensions
MagneticComposition(mH) Tolerance(%) (Ω) Tolerance(%)
ELT3KN004□ 14.00±40
125±10
1.7
A
Permalloy ringELT3KN007□ 20.00 170 1.4
ELT3KN113□ 1.00
±10
34
±15
25.0
Brass ringELT3KN126□ 1.50 49 29.0
ELT3KN142□ 0.82 24 30.0
ELT3KN019□ 14.00 ±40 125 ±10 1.7
B
Permalloy ring
ELT3KN109□ 3.80±10
115 ±20 15.0Brass ring
ELT3KN114□ 2.50 83±15
15.0
ELT3KN014□ 30.00±40
150 1.9
C
Permalloy ringELT3KN018□ 35.00 235 ±10 1.9
ELT3KN028□ 50.00 ±35 250±15
1.4
ELT3KN032□ 25.00 ±40 185 10.0
ELT3KN101□ 10.00
±10
285 ±10 1.4
Brass ring
ELT3KN104□ 1.00 35
±15
30.0
ELT3KN118□ 2.50 64 20.0
ELT3KN121□ 1.00 22.5 40.0
ELT3KN122□ 2.00 44 20.0
ELT3KN123□ 1.00 25 30.0
ELT3KN124□ 4.00 85 15.0
ELT3KN127□ 0.47 14 50.0
ELT3KN128□ 0.56 15 45.0
ELT3KN129□ 0.68 17 34.0
ELT3KN130□ 2.30 51 23.0
ELT3KN131□ 2.00 44 20.0
ELT3KN020□ 30.00 ±30 150 2.5
D
Permalloy ring
ELT3KN111□ 7.50±10
177 10.0Brass ring
ELT3KN125□ 4.00 85 15.0
ELT3KN041□ 14.00
±40
125
±10
1.7
E
Permalloy ringELT3KN042□ 20.00 175 1.4
ELT3KN043□ 12.00 117 1.7
ELT3KN139□ 0.68
±10
19
±15
40.0
Brass ring
ELT3KN140□ 0.82 22 30.0
ELT3KN135□ 1.10 32 30.0
ELT3KN136□ 2.00 55 20.0
ELT3KN137□ 4.00 117 ±10 15.0
ELT3KN149□ 0.33 11
±15
60.0
ELT3KN151□ 0.56 17 50.0
ELT3KN152□ 0.47 14 50.0
ELT3KN155□ 1.10 38 25.0 H Ring less
ELT3KN162□ 4.00 117 ±10 15.0E Brass ring
ELT3KN163□ 1.10 32 ±15 30.0
Oct. 201403
70
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Voltage Step-up Coils
t1
t2Chip component P1 P3
Chip pocket
Tape running direction
EF
W
Sprocket hole
A
B
fD0
P2
T
C
E
D
B
W tA
200 min. 50 min.
Leader part
Tape end
50 min.
Vacant position
Vacant position
Vi
Vi
SC Vo
Vo
+1.5 V
For buzzer
Vi
ViV1 V2
SC
V1
V2
+3.0 V
Load
For EL DC/DC
Packaging Methods
Applied Diagram Examples
● Standard Packing Quantity ● Embossed Carrier Tape Dimensions in mm (not to scale)
● Reel Dimensions in mm (not to scale)
● Leader Part, Vacant Position
Packaging ELT3KN Kind of Taping
B 1,000 pcs. Embossed Carrier
TapingC 5,000 pcs.
Part No. A B W F E P1
ELT3KN 3.7 6.4 12.0 5.5 1.75 8.0
Part No. P2 P3 0D0 t1 t2
ELT3KN 2.0 4.0 1.5 0.3 2.6
Packaging A B C D E W t T
B 180 60 13 21 2 13 1.1 15.2
C 370 60 13 21 2 14 2.0 18
Oct. 201402
71
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Voltage Step-up Coils
t2
Tem
pe
ratu
re (
°C)
Time
T3
T2
T1
t1
0
Refl ow soldering conditions
Soldering Conditions
● Pb free solder recommended temperature profi le
Part No.Preheat Soldering Peak Temperature
Time of
Refl owT1 [°C] t1 [s] T2 [°C] t2 [s] T3 T3 Limit
ELT3KN 150 to 170 60 to 120 230 °C 30 max. 245 °C, 10 s 260 °C, 10 s 2 times max.
Oct. 201402
72
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Voltage Step-up Coils
Don’t Press
Wiring Tab
Precautions for use
1. Operation range and environments1 These products are designed and manufactured for general and stan dard use in general elec tron ic
equipment (e.g. AV equipment, home electric ap pli anc es, office equipment, information and com mu ni ca tionequipment)
2 These products are not designed for the use in the following special conditions. Be fore using the products, care ful ly check the effects on their quality and performance, and determine whether or not they can be used.• In liquid, such as water, oil, chemicals, or organic solvent• In direct sunlight, outdoors, or in dust• In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
• In an environment where these products cause dew condensation
2. Handling1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can
change the inductance value.2 Do not apply strong mechanical shocks by either dropping or collision with other parts.
Excessive schock can damage the part.
3. Resoldering with a soldering iron1 Resoldering should be done within 3 seconds by soldering iron, the temperature with 350 °C or less and should be cooling
down after ward. Both side of terminals shall be fixed closely to PWB. And terminals shall not be pressed in heating.
Safety Precautions(Common precautions for Voltage Step-up Coils)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a writtenagreement on the specifications with us in advance. The design and specifications in this catalog are subjectto change without prior notice.
• Do not use the products beyond the specifications described in this catalog.• This catalog explains the quality and performance of the products as individual components. Be fore use, check
and evaluate their operations when installed in your products.• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other significant damage, such as damageto vehicles (au to mo bile, train, vessel), traffic lights, medical equipment, aerospace equipment, elec tric heatingap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
✽ Systems equipped with a protection circuit and a protection device✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
<Package markings>Package markings include the product number, quantity, and country of origin.In principle, the country of origin should be indicated in English.
2 The wiring tab shall not be held by sharp-edged tool.
3 Iron shall not be put to the component itself.
4. Mounting side
1 External force must be less than 4.9N while mounting.2 The wiring tab is expose the terminal, so please be careful when you design PWB pattern of coil
circumference.
5. CleaningIf you clean the inductor, please use own your ultrasonic cleaning to check specified conditions.
6. Storage conditionsNormal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight andharmful gases and care should be taken so as not to cause dew.
Oct. 201402
73
Please contact Factory
CAUTION AND WARNING
The information in this catalog is valid as of March 2020.
Device Solutions Business DivisionIndustrial Solutions Company
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office equipment, information equipment,communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aerospace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative corporation.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and or applications and is not intended to make any warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Industrial Systems Company, Panasonic Corporation.