Catalog Construction

7/30/2019 Catalog Construction

http://slidepdf.com/reader/full/catalog-construction 1/48

Products for the Construction Indust

f a l l p r o t e c t i o n e x p e r t s

U S A 6 5 1 . 3 8 8 . 8 2 8 2 w w w . d b i s a l a . c o m C a n a d a 9 0 5 . 7 9 5 . 9 3 3 3



Two Brands : One Goal

DBI/SALA and Protecta have recently joinedforces, resulting in the most complete line of fallprotection products manufactured anywhere.

While both brands operate with a similar commit-ment to safety and quality, each brand has its ownbrand promise. DBI/SALA which represents the ul-timate in fall protection for any work environmentis supported by a commitment to Excellence, In-novation and Broad Range. Protecta representsfundamental fall protection at an exceptionalvalue and is supported by a commitment to Reli-ability, Quality and Economy. The combination of the two brands now provides our customers withaccess to two great brands that serve the fullest

range of product and value requirements.

DBI/SALA and Protecta are committed to providingthe best training, the most comprehensive techni-cal support, customer service and the safest, mostcomfortable equipment available. In fall protec-tion, there is no margin for error - that’s why webuild our equipment to exceed both national andinternational standards, including OSHA, ANSI,CSA, and CE. Using and representing the bestdelivers the absolute condence you need in yourfall protection program.

ExoFit™ & ExoFit XP Full Body Harnesses 5 - 6Delta™II Full Body Harnesses & Accessories 7 - 10Shock Absorbing Lanyards 11 - 13Positioning Devices 14Self Retracting Lifelines 15 - 16Anchorage Devices/Roof Anchors/Concrete Anchors 17 - 19Rope Grabs/Lifelines/Vertical Systems 20Horizontal Lifeline Systems 21 - 24

Perimeter Debris Net System 25 - 26Portable Guard Rail™ System 26Vertical Net System 27Adjust-A-Net™ System 28Conned Space Equipment 29 - 30Protecta Compliance in a Can™ 31 - 32Protecta Full Body Harnesses 33 - 34Protecta Shock Absorbing Lanyards & Positioning Devices 35Protecta Fall Arrestors (SRL’s/Rope Grabs/Lifelines) 36Protecta Anchorage Devices 37Protecta Conned Space Equipment 38Training and Consulting Services 39 - 40Onsite Demonstrations and Training Tools 41 - 42Other Important Considerations/OSHA & ANSI Regulations 43 - 46

1

TABLE OF CONTENTS


http://slidepdf.com/reader/full/catalog-construction 3/48U S A 6 5 1 . 3 8 8 . 8 2 8 2 w w w . d b i s a l a . c o m C a n a d a 9 0 5 . 7 9 5 . 9 3 3 3

Safety is never optional !

Every day, thousands of construction workers around the world don hard hats, safety boots aglasses, then head out to do their job. These items won’t save their lives when they fall from wor

ing at height. Framers, steel erectors, roofers, plumbers, steam-fitters – almost anyone who woin construction - at some point will have to work at height. Even foundation workers are exposto potentially fatal falls!

At DBI/SALA & Protecta, we know all about the risks that construction workers take. We have hea “It won’t happen to me…” or “It’ll only take a second…” many times before. Lip service is free. Loof life, income, insurance premiums and lawsuits carry a very high price. For decades, we have beproudly engineering, manufacturing and distributing the finest fall protection equipment availabl

Why take a chance when the preventis so easy?

This catalog has been created excl sively for the construction industry. Uof it will make the appropriate selectof equipment a breeze! The products cotained in its pages offer dependable adurable solutions to almost any fall ptection danger at a site.

From the minute the ground is broken the day they cut the ribbon to open tbuilding, you can trust the DBI/SALA

Protecta names to protect the workethat make it all possible.

DBI/SALA & Protecta : Complete Fall Protection Solutio

Innovation at Wo

Our ISO 9001-2000 certification dri

superior engineering, quality manufac

ing and unparalleled customer serv

This supported by our open respons

ness to industry concerns has long bee

hallmark of our company. With the pu

cation of this brochure, we are pleased

further service the construction indu

by making it easier and quicker to sou

and specify the products that are spe

cally meant for the industry.

D B I / S A L A & P r o t e c t a : A b s o l u t e C o n f i d e n c e i n F a l l P r o t e c t i



< Welding Work

DBI/SALA• 1105475 Delta™ IIKevlar Harness (pg 9)

• 1220558 EZ-STOP® IIKevlar Lanyard (pg 11)

Protecta• AA7059A Hot Work™ Kit

(pg 33)• AA7060A Hot Work™ Kit

(pg 33)

< Steel Work

DBI/SALA• 1102000 Delta™ II

Harness (pg 7)• 1220006 EZ-STOP® II

Lanyard (pg 11)• 7602060 Sayfline™

Horizontal Lifeline System(pg 24)

• 108406 Fixed BeamAnchor (pg 17)

< Steel Erection

DBI/SALA• 1110532 ExoFit™

Harness (pg 6)• 1225006 Force2™

Lanyard (pg 13)• 2110808 Glyder™

Beam Anchor (pg 17)

PROTECTA• AB104A20 Construction

Harness (pg 33)• AJ704A BeamDog (pg 37

< Rebar Work


Harness (pg 9)• 5900050 Chain

Rebar Assembly(pg 14)

PROTECTA• AB104A20

ConstructionHarness (pg 33)

• AF77710 ChainRebar Assembly(pg 35)

< Wall-Form Work


Harness (pg 9)• 5904350 Wall Form

Hook (pg 14)

< Steel Tie-Back Work


Harness (pg 6)• 1221901 WrapBax™

Lanyard (pg 13)

PROTECTA• AB104A20 Construction

Harness (pg 33)• CE542AW1-518

Tie-Back Lanyard (pg 35)

We know that while on the job you need comfort, mobility and safety! We’ve designed each component of our safety systems to be fully customizable, ready to fit any size or shape. And because every safety systemprovides flexibility and full mobility, we make it easier to keep working productively while remaining fully pro-tected. With our total safety systems approach, we take fall protection to a new level. And to make sureyou have total protection, each one of our systems typically contains four safety components: an anchorageconnector, a body support, connecting component, and descent and rescue equipment.



Worksite Solutions & System Selectio

Specialized Safety Systems designed for the way you wo

< Commercial Roofing

DBI/SALA• 1102000 Delta™ II Harness

(pg 7)• 2103675 Standing Seam

Roof Anchor (pg 19)• Ultra-Lok® Self Retracting

Lifeline (pg 15)

< Bridge Construction

DBI/SALA• 1110152 ExoFit™ XP

Harness (pg 6)• 1221460 EZ-STOP®

Retrax™ Lanyard (pg 13)• SecuraSpan® Horizontal

Lifeline System (pg 21)

PROTECTA• AB101A PRO Harness

(pg 34)• AE560A6 Pro-Stop

Lanyard (pg 35)

< Steel Erection DBI/SALA• 1101655 Delta™ II

Harness (pg 9)• 1003000 Tie-Off

Adaptor (pg 17)• 3504430 Ultra-Lok®

SRL (pg 15)

PROTECTA• AB101A20 Construct

Harness (pg 33)• AJ450A Tie-Off Adap

(pg 37)• AD212AG JRG SRL

(pg 36)

< Concrete BridgeConstruction

DBI/SALA• 1107404 Delta™ II Hi-Vis

WorkVest Harness (pg 10)• 1224306 ShockWave2™

Lanyard (pg12)• Concrete Horizontal

Lifeline System (pg21)

PROTECTA• AB101A PRO Harness

(pg34)• AE560A6 Pro-Stop

Lanyard (pg35)

< Concrete & LeadEdge Work


Harness (pg6)• 1224006 EZ-STOP® I

Lanyard (pg 12)• 2104560 Concrete D-r

Anchor (pg 18)-------------------------• 2105500 Leading Edg

Anchor (pg 18)• 3504500 Leading Edg

SRL (pg 18)

< Residential Roo

DBI/SALA• 2104168 Roofer’s Kit(pg 19)

PROTECTA• AA7051 Compliance

in a Can™ Roofer’s Kit(pg 31)

A-AnchorageAnchorage con-nectors provide ameans of attach-ing the system toan anchorage.

B-Body SupportFull body harnessesprovide a connectionpoint on the workerfor the personal fallarrest system.

C-ConnectorsConnecting devicesare used to connectthe worker’s fullbody harness to theAnchor system.

D-Descent& RescueRescue and retriof a fallen worker necessary compoof any fall protecprogram.

The ABCD’s of the Personal Fall Arrest System :



The ExoFit and ExoFit XP are superior solutions to ‘stretch’ harnesses that can create dangerous con-ditions in a fall. ExoFit harnesses are based on theconcept of a single piece of material constructed inthe shape of an “X ” that wraps around you for theultimate in no-tangle donning and comfortable secu-rity. From the moment you put it on, it will exceedanything you’ve ever worn in a fall protection har-ness. The materials are soft and light-weight, yetextremely durable. The shoulder, hip and leg paddingincorporates a breathable lining and soft edging thatguarantees you’ll stay dry and comfortable everyday. Reflective piping enhances visibility in low-lightconditions. Color-coded quick-connect buckles, easygrip end tabs and strap keepers make adjustmentfast, efficient and totally secure! Built with qualityyou can trust, these harnesses exceed industry stan-

dards including OSHA, and ANSI Z359.1. CSA and CEcompliant models are also available.

Additional ExoFit Features:• Fixed D-ring and sized harnesses provide a perfect fit• Sewn-in padding so they can’t slip or slide off • Anti-tear, abrasion-resistant ballistic nylon ensures

strength and durability

Additional ExoFit XP Features:• The industry’s first “truly washable” harness with

removable padding• Unique spring-loaded “stand-up” dorsal D-ring with

impact indicator ensures safe and easy connection

• Integral lanyard keepers provide a connection point foryour lanyard when not in use, and for added safety itwill snap-free upon “snagging” eliminating trip-fall hazards.

ExoFit™ & ExoFit™ XP Harnesses

quick-connect buckles

5

ExoFit XP Harness 1110103

stand-up D-ring removable padding impact indicator lanyard keeper

< 1110103 ExoFit XP Harness• Stand-up back D-ring with impact indicator• Removable shoulder, back, and leg padding• Breathable 3-D mesh lining with soft edging for comfort• Quick-connect buckles• Loops for body belt



Full Body Harness

All ExoFit™ and ExoFit™ XP harnesses feature a wrap around, no-tangle design that slips on like a vest, mait quicker and easier to put on while providing ventilation, comfort, padding and security.

• Stand-up back D-ring withimpact indicator

• Tongue buckle body beltwith back pad and sideD-rings

• Removable shoulder, back,and leg padding

• 3-D mesh lining with softedging for comfort

• Quick-connect buckles• Loops for body belt

1110152 ExoFit XP

Construction Harness

1109802 ExoFit XP

Crossover Harness

1110175 ExoFit XP


1108502 ExoFit Construction Harness

1107977 ExoFit Standard Harness

1100532 ExoFit

Iron Worker Harness

• Back D-ring• Tongue buckle body belt

with back pad and sideD-rings

• Built-in shoulder, back, legand hip padding

• Breathable lining with softedging for comfort

• Quick-connect buckles• Loops for body belt

• Stand-up back D-ring withimpact indicator

• Cross-over style designwith front D-ring

• Removable shoulder, back,and leg padding

• Breathable 3-D meshlining with soft edging for

comfort• Quick-connect buckles• Loops for body belt• Cross-Chest design ideal

for female workers

• Stand-up back D-rimpact indicator

• Tongue buckle bodwith back pad andD-rings

• Removable shouldeand leg padding

• Breathable 3-D me

lining with soft edgcomfort

• Quick-connect chebuckle and tonguelegs

• Loops for body bel

• Back D-ring• Built-in shoulder, back, leg

and hip padding• Breathable lining with soft

edging for comfort• Quick-connect buckles• Loops for body belt

• Back D-ring• Reinforced leg and

straps for added d• Tongue buckle bod

with back pad andD-rings

• Built-in shoulder, band hip padding

• Breathable lining wedging for comfort

• Quick-connect chebuckle and tonguelegs

• Loops for body bel

m o d e l & s i z e t y p e D - r i n g s b u c k l e t y p e h i p p a d / b e l t b e l t l o o p s s t y l e

S M L XL

1110100 (01)(02)(03) ExoFit XP Back Quick Connect No Yes Vest

1110225 (26)(27)(28) ExoFit XP Back, Side Quick Connect No Yes Vest

1110125 (26)(27)(28) ExoFit XP Back Tongue Buckle No Yes Vest

1110150 (51)(52)(53) ExoFit XP Back, Side Quick Connect Yes Yes Vest

1110175 (76)(77)(78) ExoFit XP Back, Side Tongue Buckle Yes Yes Vest

1109800 (01)(02)(03) ExoFit XP Back, Front Quick Connect No Yes Crossover

1107975 (76)(77)(81) ExoFit Back Quick Connect No Yes Vest

1108575 (76)(77)(81) ExoFit Back, Side Quick Connect No Yes Vest

1109356 (55)(57)(58) ExoFit Back Tongue Buckle No Yes Vest

1108500 (01)(02)(07) ExoFit Back, Side Quick Connect Yes Yes Vest

1110475 (76)(77)(78) ExoFit Back, Side Tongue Buckle Yes Yes Vest

1100530 (31)(32)(33) ExoFit Back, Side Tongue Buckle Yes Yes Vest



The Delta™ II Harness : The Most Popular Harness on the Market Just Got Better

All Delta II harnesses now

come standard with a spring-

loaded “stand-up” back d-ring

that ensures quick and easyconnection to your fall arrest

device. Also available with

quick-connect buckles.

Every Delta harness combines

comfort, freedom of movement

and ease of use without sacricing safety. All are

designed to securely retain you in case of a fall

and distribute the impact forces throughout your

body. Our exclusive Delta No-Tangle® design holds

the shape of the harness, making it easier to put

on. This added comfort and ease in donning has

greatly improved worker acceptance and reduced

the probability of improper usage.

Delta II harnesses are built with light-weight

polyester webbing for added durability and

plated forged alloy steel hardware for strength

and corrosion resistance. It incorporates 5-point

adjustment for fast and easy donning, including

a non-slip, pass-thru buckle chest strap. Delta II

harnesses come in a variety of options and sizes to

meet your job site needs. Built with quality you can

trust, these harnesses meet or exceed all applicable

industry standards including OSHA, and ANSIZ359.1. CSA & CE compliant models also available.

7

Delta II Harness 1102000

< 1102000 Delta II All-Purpose Harness• Vest style with back “stand up” D-ring• Tongue buckle leg straps for fast and easy donning

(also available with pass thru & parachute buckleleg straps)

• Size Universal (additional sizes available)

1 2 3

Delta II

Harness Accessories

1 Delta Comfort Back Pad 9501207

2 Tongue Buckle Body Belt 1000054

3 Pouch with Snap Closure 5900892

4 18” D-Ring Extension 1201117

5 Hip Pad & Back Support 9508035

6 Foam Shoulder Pad 9504097

7 Accessory Strap 9504374



Delta™ II Full Body Harness

Delta II Quick-ConnectThe most popular Delta harnessnow comes with color-coded Quick-Connect buckles. This enablesquick and easy donning. Available

in a wide variety of congurations,this harness is ideal for all generalpurpose applications.

Delta II ConstructionWith the addition of belt loops, useyour own body belt or try one of ours for added back support andtool-carrying options. This harness

is ideal for general constructionapplications where fall protectionand positioning is needed.

4 5 6 7

• Vest style with back “standup” D-ring

• Quick-Connect buckles for fastand easy donning

• Also available with side andshoulder D-rings

• Size Universal (additional sizesavailable)


• Built-in belt loops to support atool or support belt

• Side positioning D-rings• Pass-thru buckle leg straps• Size Universal (additional sizes

available)

Delta II Cross-overThe cross-over harness is ideal general construction and mainnance applications, with a frontring it’s perfect for attachment t

ladder safety system. The patencross-chest design is also suitafor female workers, positionshoulder straps accross the chfor increased comfort and t.

• Cross-over style with back“stand up” D-ring

• Back, front and side D-rings• Pass-thru buckle leg straps• Size Universal (additional size

available)

1103270 Delta II Cross-over Harness

1103512 Delta II Construction Harness

1110600 Delta II Quick-Connect Harness

Back View Back View Back Vie



Delta HarnessLeg Strap Options

A • Tongue BuckleB • Pass-ThruC • Parachute BuckleD • Quick-Connect

ee the chart on page 10or specic information.

Delta II Nomex®/Kevlar®

This lightweight and easy to donharness is constructed with ame-resistant Nomex/Kevlar web withPVC coated hardware for the ulti-mate protection from heat. It isavailable in all sizes to meet yourneeds.

• Vest style with back D-ring• Pass-thru leg straps for

fast and easy donning• Constructed of ame-resistant

Nomex/Kevlar webbing• Non-conductive, non-sparking

PVC coated hardware• Built-in belt loops to support

a tool or support belt• Size Universal (additional sizes

available)

1105475 Delta II

Nomex/Kevlar Harness

Back View

Delta II ConstructionWith the addition of a body belt andpad with side D-rings, this harnessis ideal for general construction ap-plications where fall protection andpositioning is needed. It providesadded versatility for carrying toolsand pouches, and provides addi-tional back support and comfort.


• Tongue buckle leg straps forfast & easy donning

• Sewn-in hip pad and shoulderpads for the ultimate incomfort.

• Tongue buckle belt and sideD-rings for added comfortand additional support andversatility.

• Size Large (XS-3XL available)

1101655 Delta II


Back View

Delta II Iron WorkerIron worker harness designed foradded comfort, versatility and wearlayer webbing on the seat for ad-ditional durability. Sewn-in hip padand shoulder pads provide comfortand support. Adjustable belt strapsprovide extra support while carry-ing tools and accessory clips pro-vide for easy lanyard storage.


• Reinforced leg and seat strapsfor added durability

• Tongue buckle body belt withback pad and side D-rings

• Sewn-in hip and shoulder pads• Clips for lanyard storage• Adjustable belt straps with

support clips• Size is Large (XS-3XL

available)

1106450 Delta II

Iron Worker Harness

Back View

A CB D



Delta™ II Full Body Harness

D e l t a I I h a r n e s s e s

m o d e l & s i z e D - r i n g s b u c k l e t y p e h i p p a d / b e l t b e l t l o o p s s t y l e a d d i t i o n a l

1102000 (U) Back Tongue Buckle No No Vest No

1103321 (U) Back Pass-Thru No No Vest No

1102001 (U) Back Parachute No No Vest No

1110600 (U) Back Quick-Connect No No Vest No

1102008 (U) Back, Side Tongue Buckle No No Vest No

1103875 (U) Back, Side Pass-Thru No No Vest No

1102526 (U) Back Tongue Buckle No Yes Vest No

1103513 (U) Back Pass-Thru No Yes Vest No

1105475 (U) Back Pass-Thru No Yes Vest Kevlar Webbing/PVC Hardw

1102025 (U) Back, Side Tongue Buckle No Yes Vest No

1103512 (U) Back, Side Pass-Thru No Yes Vest No

1107404 (L) Back Tongue Buckle No No Vest Hi-Vis Vest

1102950 (U) Back & Front Tongue Buckle No No Cross-over No

1102010 (U) Back & Front Pass-Thru No No Cross-over No

1103375 (U) Back, Front, & Side Tongue Buckle No No Cross-over No

1103270 (U) Back, Front, & Side Pass-Thru No No Cross-over No

1102201 (S) Back, Side Tongue Buckle Yes Yes Vest No

1101654 (M) Back, Side Tongue Buckle Yes Yes Vest No

1101655 (L) Back, Side Tongue Buckle Yes Yes Vest No

1101656 (XL) Back, Side Tongue Buckle Yes Yes Vest No

1110577 (L) Back, Side Quick-Connect Yes Yes Vest No

1106405 (L) Back, Side Tongue Buckle Yes Yes Vest Reinforced seat straps

1106450 (L) Back, Side Pass-Thru Yes Yes Vest Reinforced seat straps

1107404 Delta II Hi-Vis

Workvest & Harness

• Constructed from certiedHi-Vis fabric & reectivetape, meets Class 1 & 2high visibility requirementsof ANSI/ISEA 107-1999

• Padded shoulders and neckliner enhance comfort & mobility

• Velcro tool fastener supportsfor accessory attachment

• Two chest pockets, one witha snap closure, one withslot for pens/pencils for

plenty of on-board storage• Tongue buckle leg straps for

fast & easy donning• Size = Large Vest &

Universal Harness. Othersizes available

Delta II Work VestDBI/SALA’s Delta II Work Vest and Harness is for useday or night when visibility and protection counts.The WorkVests incorporate a sleeveless waist lengthvest. Chest, shoulder and leg buckles are visible.

9501403 SuspensionTrauma Safety Strap

Suspension Trauma Safety StrapThe industry’s most effective safety despecically designed to help relieve negative effects of suspension trauma aa fall.

• Allows worker who is suspended to stup in their harness to relieve pressur• A safety accessory that can be attach

to most harness brands/styles right ithe eld

• Installation to your harness is fast anefcient – just choke off tstrap and it’s ready to go

• Extremely compact andlightweight design stays oof the worker’s way

• Deployment and operatiofool-proof – simply unzip

hook straps together• Continuous loop design

allows for either one or twfoot suspension relief without pinching



EZ Stop Lanyards are available in multiple congurations with a variety of anchorage hooks :From left to right : 1 • Standard DBI/SALA patented snaphook with 3/4” (19mm) gate opening

2 • Aluminum rebar hook with 2-1/4” (57mm) gate opening3 • Flat steel rebar hook with 2-1/4” (57mm) gate opening

Lanyards & Shock Absorbing Lanyards

Our EZ Stop® II shock absorbinglanyards are designed for versa-tility and are available in many

variations. There is certain to be amodel that will meet your fall ar-rest requirements. All EZ Stop® IIlanyards utilize a controlled tearingaction when subjected to fall arrestforces, limiting arresting forces tono more than 900 lbs. (4 kN)

EZ Stop Lanyards feature :• 1” (25mm) polyester webbing for

durability and longevity• Easy to use self locking snap hooks• 6 ft. (1.8m) in length (other

lengths available)• Available with 1” (25mm)

polyurethane coated webbing forabrasion resistance (#1220850)

• Available in Kevlar (#1220558)

Double-Leg 100% Tie-Off Tie-Back 1221206

1

Single-Leg 1220006

1 2 3

Every DBI/SALA lanyard com-bines super strength and ease of use without sacricing safety. Alllanyard hardware is proof testedto industry standards, and ourpatented, user-friendly self lock-ing snap hooks are standard onall DBI/SALA lanyards. They allowyou to open and close the hookeven with gloves on without get-ting your thumb or ngers in theway, they’re industry preferred! Alllanyards exceed industry standardsincluding OSHA and ANSI Z359.1.CSA & CE approved models also

available.

Double-Leg 100% Tie-Off 1220406

Kevlar Web1220558One-handed, easy

connections -even with gloves on !



Lanyards & Shock Absorbing Lanyar

• Expands to 6 ft. (1.8m) and contracts to 4-1/2 ft. (1.4m)

• Reduces dragging and snagging for more freedom of movement• Twin-leg 100% tie-off style helps you remain connected at all tim• Variety of hook options to meet your worksite needs• Impact indicator allows user to visually inspect unit for a fall

Our ShockWave2™ shock absorbing lanyards are stretchable for complete freedom of movement. They expto 6 feet (1.8m) and contract to 4-1/2 feet (1.4m) in reaction to your movements, reducing trip hazards, dging, and snagging. The ShockWave2 incorporates a unique inner core that immediately begins to extend absorb energy during a fall, limiting arresting forces to no more than 900 lbs. (4 kN)

Twin-Leg 100% Tie-Off withFlat Steel Hook Ends1224412

Single-Leg withStandard Hook Ends1224306

Super StrengthPolyester webbing with tensilestrengths of up to 9,800 lbs.(39 kN) won’t give out, evenwhen you do.

Many CongurationsWe have shock absorbinglanyards for every industry inmultiple congurations - seepage 14 for more details.

Always Under 900 lbs.As vital components of a fall arrest system, our standard lanyards limit arresting forces tono more than 900 lbs (4 kN).

EZ Stop® III Shock Absorbing Lanyard1224006

• 1-3/8” (35mm) tubular web jacket and polyestercore for durability and longevity

• Easy to use self locking snap hooks at both ends• Soft cover shock absorber for extra durability• 6 ft. (1.8m) in length (other lengths available)• Limits arresting forces to 900 lbs. (4kN) or less

Our EZ Stop® III shock absorbing lanyards are lightweight and compact; their simple design ingrates the shock absorber for reduced weight and bulk.

The basic design of the EZ Stop has proven to not only be safe and effective but very popular within the cstruction market. There is certain to be a model that will meet your fall arrest requirements from this prodline. All EZ Stop® III lanyards utilize a stretching action (instead of a tearing action) when subjected to fall arforces, limiting arresting forces to no more than 900 lbs (4 kN).



The Retrax retractable shock absorbing lanyard stays close to the body reducing trip fall hazards, snagging onequipment and dragging.

Unique spring technology retracts an expands from 2-1/2 to 6 feet (0.8m to 1.8m)Compact, lightweight device weighs only 2 lbs (0.9kg)Smooth retraction without irritating lock-upsAdjustable retraction length allows user to limit retraction at any interval between 2-1/2 and 6 ft (0.8 to 1.8m)

EZ Stop® Retrax™ Single-Leg 1221460

The EZ Stop® Retrax™ shock absorbing retractable lanyard is another DBI/SALA innovation - for safety’s sake!The EZ STOP Retrax is the rst shock absorbing lanyard that retracts automatically to t the working area. Its a unique alternative to elasticized lanyards. Using a specialized retraction technology, it retracts and expandsmoothly and consistently from 2-1/2 to 6 feet (.8m - 1.8m).

• 5,000 lb. (2,268 kg) hook capacity fromevery direction

• Heavy-duty 13,000 lb. (52 kN) webbingprovides 5X more abrasion resistance

• Ergonomic pistol grip design is perfectlyformed to t a gloved or non-gloved hand.

• Built-in web guide directs the webbing intothe open hook for simple and quickconnection and use

Traditional hook designs are not intended for tying back, however, many workers mistakenly use their standardhooks to tie-back. Should the worker fall with a standard hook tied back, the forces may inadvertently end upon the gate, face or side which are not intended for load-bearing, causing it to fail open and injure the workerThe WrapBax™ hook offers a unique look to easily differentiate from standard hooks and provides 360 degreeprotection - 5,000 lbs. (2,268 kg) in any direction. The pistol grip and trigger action makes WrapBax™ easy tooperate and convenient for the worker.

WrapBax™ Tie-Back Single LegShock Absorbing Lanyard1221901

3

The Force2™ shock absorbing lanyard is used when there is no overhead anchor-ge and your only option is to tie off at your feet - often faced by iron workers.t can be used for up to a 12 foot free fall (3.7m) and limits the arresting forces

below OSHA’s limits.

• Used for tying off at your feet

• Soft shock absorber cover for comfort• 6 ft (1.8 m) total length (other lengths available)• Limits arresting forces to under 1800 lbs (8 kN)

Force2™ Shock Absorbing Lanyard1225006



Lanyards & Shock Absorbing Lanyar

• 1” (25mm) polyester constructed webbing foradded durability

• Easy to use self locking snap hooks at both ends• 6 ft. (1.8m) in length

• Web lanyards are available in many congurations,including xed or adjustable lengths with varioushook choices

Our lanyards are ideal for restraint or positioning applications, for fall arrest check out our EZ STOP® orShockWave™ shock absorbing lanyards.

Web Lanyard1201106

• Twisted link chain• Self locking snap hooks at leg ends• Swiveling at steel hook with 2-1/4”

opening (57mm)• 22” (56cm) in length

Our chain rebar lanyards are designed for versatility and are available in many variations with unique hoto provide safe and compatible connection to many types of structures. Use these positioning and restrlanyards while performing such tasks as rebar tying or construction of wall-forms. They should only be useapplications that limit the free fall to two feet or less.

Chain Rebar Assembly5900050

Wall Form HookAssembly 5904350

• Twist link chain• Self-locking snap hooks at leg ends• Fits most wedge bolt slots or holes

wall forms• 1/4” (6mm) tapered wall-form

hook nose• 16” (41cm) in length

m o d e l # t y p e s i n g l e l e g d o u b l e l e g t i e - b a c k l e n g t h c o n n e c t o r s a d d i t i o n a l

1220006 EZ Stop II X No 6’ (1.8m) standard N/A

1220256 EZ Stop II X No 6’ (1.8m) adj. standard adjustable length

1220850 EZ Stop II X No 6’ (1.8m) standard coated webbing

1220706 EZ Stop II X No 6’ (1.8m) standard 7/32” (6mm) vinyl coated c

1220558 EZ Stop II X No 6’ (1.8m) standard Kevlar web

1220406 EZ Stop II X No 6’ (1.8m) standard N/A

1220416 EZ Stop II X No 6’ (1.8m) 1 standard/2 aluminum rebar N/A

1221106 EZ Stop II X Yes-D-ring 6’ (1.8m) standard Abrasion resistant tubular wear ja

1221206 EZ Stop II X Yes-D-ring 6’ (1.8m) standard Abrasion resistant tubular wear ja

1221460 Retrax X No 6’ (1.8m) standard N/A

1221481 Retrax X No 6’ (1.8m) 1 standard/2 steel rebar N/A

1225006 Force2 X No 6’ (1.8m) standard N/A

1225056 Force2 X No 6’ (1.8m) standard 7/32” (6mm) vinyl coated c

1221901 WrapBax X Yes 6’ (1.8m) WrapBax hook N/A

1222001 WrapBax X Yes 6’ (1.8m) WrapBax hook N/A

1224006 EZ Stop III X No 6’ (1.8m) standard N/A

1224306 Shockwave2 X No 6’ (1.8m) standard N/A

1224311 Shockwave2 X No 6’ (1.8m) 1 standard/1 aluminum rebar N/A

1224406 Shockwave2 X No 6’ (1.8m) 3 standard N/A

1224412 Shockwave2 X No 6’ (1.8m) 1 standard/2 steel rebar N/A

1224409 Shockwave2 X No 6’ (1.8m) 1 standard/2 aluminum rebar N/A

1201106 Positioning Only X No 6’ (1.8m) standard N/A

1202354 Positioning Only X No 6’ (1.8m) standard 1/2” twisted rope

5900050 Positioning Only X No 22” (56 cm) 2 standard/1 steel rebar rebar assembly

5904350 Positioning Only X No 16” (41 cm) 2 standard/1 wall form hook rebar assembly



Sealed SRL’s incorporate a revolutionary patented concept that separates all dynamic components, includ-ing the motor spring and brake, from foreign elements such as grease, moisture and dirt. All lifelines meetor exceed applicable industry standards including OSHA and ANSI Z359. CSA and CE compliant models are

also available. In addition, all models come with a two year warranty with no recertication required.

Self Retracting Lifelines

Ultra-Lok® Self Retracting Lifeline - 11ft. (3.3m) web3103108

• Stainless steel working components for corrosion resistance• 11 ft. (3.3m) 1” (25mm) nylon web lifeline for reduced weight• Reserve lifeline system maintains safe arresting forces in the event of a

fall when lifeline is fully extended• Self-locking swivel snap hook with impact indicator• Swiveling anchorage loop to prevent twisting of lifeline• Also available in 20’ (6m) length

5

Ultra-Lok® Self Retracting Lifeline

3504430

• Stainless steel working components for corrosion resistance

• 30 ft. (9m) 3/16” (5mm) galvanized wire rope for durability

• Reserve lifeline system maintains safe arresting forces in the

event of a fall when lifeline is fully extended

• Self-locking swivel snap hook with impact indicator

• Swiveling anchorage loop to prevent twisting of lifeline

• Also available in 20’ (6m), 50’ (15m), and 85’ (25m) lengths

Sealed Self Retracting Lifeline - 50 ft (15m) cable3403400

• Stainless steel and cast aluminum housing for corrosion resistance• 50 ft. (15m) 3/16” (5mm) galvanized steel wire rope for durability• Environmentally sealed design for safety, even in harsh environments• Self adjusting disc brake for reliability• Reserve lifeline system maintains safe arresting forces in the event of a fall when

lifeline is fully extended

• Self-locking swivel snap hook with impact indicator• Available in 85’ (25m) & 130’ (39m) lengths• 175’ (53m) non-sealed version also available

Ultra-Lok® SRL’s come with a durable glass-lled polyurethane housing, a 3/16” (5mm)wire rope lifeline and aluminum side plates for maximum durability and minimum weight.For added security, Ultra-Lok systems have an anti-ratcheting twin disc brake system withan audio indicator to let you know it is functioning properly. Ultra-Lok SRL’s come with a2-year warranty, with no annual recertication required.



Self Retracting Lifelin

• Compact, lightweight design• 8 ft. (2.4m) of 1” (25mm) nylon

webbing• All metal braking system for

durability• Quick-connect handle is ideal fordirect attachment to anchorage orharness

• Lifeline impact indicator and self locking swivel snap hook

• Also available in 16’ (4.8m) length

U l t r a - L o k s e l f r e t r a c t i n g l i f e l i n e s

m o d e l # l e n g t h l i n e t y p e c o n n e c

3103107 11’ (3.3m) web standar

3103108 11’ (3.3m) web swivel

3103207 20’ (6m) web standar

3103208 20’ (6m) web swivel

3504430 30’ (9m) galvanized swivel

3504431 30’ (9m) stainless swivel







3504500 30’ (9m) galvanizedenergy abso

with swiv

3504600 55’ (16m) galvanizedenergy abso

with swiv

Ta l o n s e r i e s s e l f r e t r a c t i n g l i f e l i n e s


3101000 8’ (2.4m) 3/4” (19mm) nylon web standar

3101001 8’ (2.4m) 3/4” (19mm) nylon web swivel

3101006 8’ (2.4m) 3/4” (19mm) nylon web rebar ho

3101050 16’ (4.8m) 3/4” (19mm) nylon web standar

3101051 16’ (4.8m) 3/4” (19mm) nylon web swivel

s e a l e d s e l f r e t r a c t i n g l i f e l i n e s








Talon™ 8 ft. (2.4m)Self Retracting Lifeline 3101001

Leading Edge Ultra-Lok® Self Retracting Lifeline3504500

• 30 ft. (9m) 7/32” (5.5mm) galvanized steel wire rope for added durability – it is 35stronger than standard SRL cables & offers 15% more surface area

• The 3504500 mounts into DBI/SALA’s leading edge concrete anchor to form acomplete system, the SRL will swivel and stay aligned with the user preventintwisting and tangles

• Self-locking swivel snap hook with impact indicator• Swiveling anchorage loop to prevent twisting of lifeline• Also available in 55’ (16m) length - #3504600

The Ultra-Lok leading edge self retracting lifeline is a unique SRL that provides adprotection against lifeline wear and damage when working near leading edges. Withover-sized cable lifeline and the external energy absorber, the leading edge SRL lifeis resistant to damage from sharp, abrasive leading edges that are found on many cstruction sites. If a fall over an edge occurs, a standard cable lifeline can be subjeto substantial wear and abrasion. The external energy absorber also helps reducearrest forces for the user.



1 2We manufacture the industry’s widest range of anchor-age connectors, combining ease of use, light weight,and strength (5,000 lb. [22kN] min. tensile strength).

These devices meet or exceed OSHA and ANSI Z359.1;CE and CSA compliant models are also available.

Anchorage Connectors

3

Saok® Carabiners• Self-closing/Self-locking gate for increased

safety and security• Steel construction for durability• User-friendly design for simple operation

even while wearing gloves• High strength construction with a minimum

tensile strength of 5,000 pounds (22kN)• Compatible with most connecting rings 1 • 2000106 @ 1-3/16” (30mm) gate opening2 • 2000108 @ 2” (51mm) gate opening3 • 2000523 @ 3/4” (19mm) gate opening

D-ring & AnchoragePlate 2101630• Bolted or weld on• Two 1/2” (12mm)

attachment holes• Stainless steel

plate, zinc platedD-ring

• 1/4” x 2” x 4-1/4” (6mm X 50mm X108mm)

Similar Models:

2101634: raw steel

2101632: painted

2101636: stainless

Cable Choker5900550• Pass-through design• 7x19 3/8” (9.5mm)

stainless steel cableconstruction

• 4 ft. (1.2m) length• Dual O-ring pass thru• Coated steel

hardware forcorrosion resistance

and strength Similar Models:5900551: 6’ (1.8m) length

Scaffold Choker1201390• 1” (25mm) polyester

strength member• 17” (43cm) length• Fits 3” (76mm)

maximum diameterstructure

• Coated steelhardware forcorrosion resi-

stance and strength

Tie-Off Adaptor1003000• 1-3/4” (44mm)

polyester strap• 3” (76mm) wear

guard• 3’ (.9m) length• Coated steel

hardware Similar Models:

1002103: adjustable1003006: 6’ (1.8m) length1002106: 6’ (1.8m) length

adjustable

Fixed Beam Anchor

2108406

Works horizontally or

vertically

(details below)

Glyder™ Beam Anchor2110808

For complete horizontal

mobility

details below)

The 2108406 Fixed Beam Anchor is a fall arrest anchorage point that can be mounted both horizontallyand vertically. Fits 1-1/2” (38mm) thick flange, 2-1/2 to 12” (63-304mm) wide (larger models available).The 2110808 Glyder is designed for use with the Force2 shock absorbing lanyard when used at foot level.Channel locks, spring-loaded engagement, and a pin retention system ensures smooth operation. Fitsflange 3-1/2 to 12” (89-304mm) wide, up to 1-1/4” (32mm) thick (larger sizes avail.)



Anchorage Devic

• Concrete column anchor eliminates the need to tie-off on the rebarand provides 100% protection while climbing the form

• Replaces ladders or platforms to pour and vibrate concrete• Incorporates built-in self retracting lifeline (SRL) that limits fall

arrest forces to 900 lbs. (4 kN) or less• Built-in adjustable platform for worker stability and satisfaction• Web ratchet device quickly secures anchor to column form• Lightweight aluminum construction (35 lbs. [16 kg]) for ease-of-use

Concrete Anch

web ratchet dev

incorporated S

adjustable platfo

top hook

web roller

DBI/SALA manufactures the industry’s widest range of anchorage con-nectors and fall protection systems, combining ease of use, light weightand high strength. The concrete column anchor provides workers with a

quick, easy and safe anchorage point during form work. In addition toeliminating the need of going unprotected while climbing the concreteform, you no longer have to tie-off to the rebar.

Concrete Column Anchor System2104600

Similar Models:

2104601: 16 ft. (4.8m) Concrete Column Anchor with SRL, 2104602: 12 ft. (3.6m) Concrete Column Anchor with-out SRL, but with D-ring at top for lanyard connection, 2104603: 16 ft. (4.8m) Concrete Column Anchor withoutSRL, but with D-ring at top for lanyard connection, 2100018: Optional Large Top Hook Side Plates Kit – ts 6” to10-1/2” (150 to 266mm) width form, 2100016: 4 ft. (1.2m) Concrete Column Anchor Extension

Concrete Anchor Strap2100050• Provides temporary anchorage on concrete forms• Loop slips over rebar, concrete is poured on top of loop

and wear pad• Once concrete sets, 5,000 lb. (22kN) anchorage point exists• When no longer needed, simply cut strap and discard• Durable 1-3/4” (44mm) polyester webbing construction with

full length outer wear pad for ultimate abrasion resistance• Forged alloy steel D-ring provides compatible connection

point for your lanyard or self retracting lifeline

Leading Edge Concrete Anchor2105500• Developed for work on pre-cast concrete• For use with 3504500 30 ft. (9m) 7/32” (5.5mm) galvanized

cable Leading Edge Ultra-Lok® SRL (order separately)• Can also be used as end anchors for temporary HLL• Fast, easy installation with built-in ratchet securing system• Zinc plated steel provides strength and corrosion resistance

Concrete D-Ring Anchor2104560• Drill hole in set concrete, insert and torque anchor, and you have a

5,000 lb. (22kN) anchor ready for use.• For temporary or permanent applications• Reusable D-ring assembly• Rugged design - no moving or fragile parts• Indicator noties user that anchor is installed properly• Fits 11/16”, 18mm or 3⁄4” holes (standard drill bits)• Connection point swivels 360º for safety and usability

• Also meets ASTM E488 Standard Test Methods for Strength of AnchorsSimilar Models:

2104561: D-ring Assembly with 5 additional bolts

2104562: D-ring Assembly with 11 additional bolts



Removable/Reusable Roof Anchor 2103673• Nail (twelve 16d) or bolt

(six 1/4”x2-1/2” [6x54mm]or longer lag screws) intoroof member

• Designed to be removable,may re-used after inspection

Permanent Roof Anchor2103670• Clamps onto roof member• Complete with ashing to

prevent leakage• Fits up to 2x8 roof truss, joist

or rafter (#2103671 ts2X10’s & 2X12’s)

9

Roof Anchors

When you are out on the roof of a residential or commercial wood frame structure, whether at or sloped,your fall protection system needs specialized components to keep you safe and secure without causingdamage. DBI/SALA’s easy to use, economical roof anchor devices and anchorage components provide theperfect solution and meet the latest OSHA and ANSI standards. No matter what you are connecting to,

DBI/SALA has a connector to get the job done and keep you safe in case of a fall. All roof anchors and ropegrabs meet or exceed OSHA and ANSI Z359.1. CE and CSA compliant models are also available.

Reusable Roof Anchor2103676• Includes 20 16D nails for

single use• Nail into the sheathing and

joist, rafter, etc.

Standing Seam Roof Anchor2103675• 360º swivel• No special tools required

for installation• Portable & reusable on sloped

or at standing seam roofs.• Fits 30 or 50 ft. (9m or 15m)

Ultra-Lok® SRL (not included)• Telescoping adjustment legs

t 24”, 30”, 32”. and 36” (60,75,80,90cm) seam spacing

Portable Roof Anchor2105683• Portable and reusable on

at or sloped wood andmetal decking

• 360º mobility• Fits 30 or 50 ft. (9m or 15m)

Ultra-Lok® SRL (not included)• No special tools required for

installation• Additional D-ring anchor point• Fall arrest rated

Swiveling Roof Anchor & SRL3505694• Removable/reusable after

inspection• Complete with 30’ (9m)

Ultra-Lok® self retracting lifeline• 360º mobility• Nail (twenty-four 16d) or

bolt (twelve 1/4”x2-1/2” [6x54mm] or longer lagscrews) into roof member

9

104169 Roof Kit: 2103676 anchor, 1224005 rope adjuster/lanyard, 1103513 harness, 1203000 lifeline x 50’, 5901583 counterweight, 9511597 bag104168 Roof Kit: 2103673 anchor, 1224005 rope adjuster/lanyard, 1103513 harness, 1203000 lifeline x 50’, 5901583 counterweight, 9511597 bag

• Use the items below with the 3504500 Leading Edge SRL (pg 16) for ultimate protection •



Anchorage Devices/Rope Gra

*Stainless Steel Construction

Rope Gra

This rope adjuster with an attached 3 ft. (.9m) shock absorbing lanyard is ideal for sloproof work or leading edge fall restraint, as the grab stays locked in place once positioneBy compressing the rope adjuster forward, the worker can slide the device along the lifeliuntil he or she has reached their work position. Release the rope adjuster and it locks on

the lifeline providing fall protection to the worker attached.

Rope Adjuster Lanyard 1224005• Static type rope adjuster design stays where you want it and moves when you move it• Permanently attached EZ Stop® III shock absorbing lanyard limits arresting forces• Corrosion resistant construction• 3 ft. (.9m) in length

Automatically follows, giving greater freedom of movement andvirtually hands-free operation. As you climb up and down the scaf-fold or portable ladder, you don’t have to worry about the grabsnagging all the time and hampering your productivity. This grab

runs so smoothly, you’ll forget it’s even there.

Rope Grab 5000335• Revolutionary design is less sensitive to rope variations - works

on worn rope with no nuisance lock-ups• Mobile type, automatically follows worker• Utilizes both inertia and cam locking system for added safety

- preventing “panic-grab” situations• Gravity latch prevents improper installation• Attach or detach anywhere along the lifeline• Corrosion resistant stainless steel and thermoplastic• Fits 5/8” (16mm) diameter rope lifeline• Use with 3 ft. (.9m) EZ Stop® II SAL #1220007

Lad-Saf ® Static Wire Rope Grab 5000338• Static type design that stays where you want it and moves when you move it• Patented wedging action grips and locks onto cable lifeline• Attach/detach anywhere along lifeline for added versatility• Corrosion resistant stainless steel construction• Fits 3/8” (9.5mm) diameter 7x19 galvanized or stainless steel cable

r o p e l i f e l i n e s

m o d e l # l e n g t h r o p e t y p e c o n n e c t o r s

1202753 30’ (9m) 5/8” (16mm) blended polyester/polypropylene snaphooks at both ends

1202754 30’ (9m) 5/8” (16mm) blended polyester/polypropylene snaphook at one end, taped at other end









Portable Horizontal Lifeline System

A simple and versatile horizontal system specifically designed for multiple applications! It connects to rebaron prestressed concrete beams, shear connector studs or directly to steel I-beams with an optional adaptor.The system fits 3/4” (19mm) dia. shear connector studs, most rebar configurations, #3 to #6 rebar and

both 2-1/2” to 12” (6.3 to 30cm) center to center, and I-beams with flange widths of 10” to 25” (25 to 63cm) and 1/2” to 3” (1.25 to 7.6cm) thick. The stanchions are adjust-able from vertical 20 degrees left or right for easy passage, or completely horizontal for

transportation to the jobsite.7003520

• 20 ft. (6m) complete system, stanchions, cable assembly and Zorbit™ energy absorber (last two digits in partnumber designate length–available in 10 ft. (3m) increments up to 60 ft (18m).

• Easily installed with a standard torque wrench• Provides 100% tie-off for two workers per span, four per system, traverse entire system without disconnecting.• Single span systems up to 60 ft. (18m), multi-span systems available to provide unlimited distances.

• Stanchions incorporate single clamp design for fast attachment• Includes 2 stanchions (intermediate stanchions available for multi-span systems).• Unlimited system length provides 100% protection and exibility• Includes Zorbit® energy absorber with turnbuckle• Standard size ts anges up to 12” (30cm) wide, and 2-1/4” (5.7cm) thick(optional base clamps available to t 18”, 24” or 36” [45,60, 91cm] wide beams)

• Custom length systems available in 10’ (3m) increments

Customize Your System:7400001: Stanchion, ts ange width up to 12” wide, 2-1/4” thick (30x5.7cm)7400008: Bypass bracket kit

7400009: Clamp assembly to t up to 18” (45cm) wide ange7400010: Clamp assembly to t up to 24” (60cm) wide ange7400011: Clamp assembly to t up to 36” (91cm) wide ange7403020: 20 ft. (6m) cable assembly w/turnbuckle and Zorbit (last 3 digits in Part # detail length)

SecuraSpan® Horizontal Lifeline System 7400120 (20’ [6m] System)Utilizes extremely lightweight and affordable stanchions that can be congured into acomplete engineered fall protection system for steel erectors. With optional “bypass”

bracket, the system can be congured to run indenitely for ultimate jobsite exibility.Spans between intermediates can be as great as 60 ft. (18m) depending upon yourclearance requirements. Installation is simple, fast and efcient with a single clampanchor on the stanchion base. A worker can move the temporary system from onelocation to another for added productivity.

Horizontal Lifeline Systems

SEE OPPOSITE PAGE FOR SYSTEM SKETCH AND CLEARANCE CHART

S e c u r a s p a n c l e a r a n c e( r e qu i r e d abo v e l o w e r l e v e l o r o b s t r u c t i o n )

s p a nl e n g t h

1-2 users6’ (1.8m) lanyard

1 - 2 u s e r sS R L

0-10’ (3m) 14’-2” (4.3m) 10’-9” (3.2m)

10’-20’ (3-6m) 15’-5” (4.6m) 11’-11” (3.6m)

20’-30’ (6-9m) 16’ (4.8m) 13’-2” (3.9m)

30’-40’ (9-12m) 17’-10” (5.4m) 14’-6” (4.4m)

40’-50’ (12-15m) 19’ (5.7m) 15’-7” (4.7m)

50’-60’ (15-18m) 20’-2” (6.1m) 16’-8” (5m)

Additional Lengths7400130: 30’ (9m) system7400140: 40’ (12m) system7400150: 50’ (15m) system7400160: 60’ (18m) system

Customize Your Own System

7006334: Additional Stanchion7006333: Additional Tie-Back Assembly (must use with stanchion on each end of system)7006335: I-Beam Adaptor Base for Stanchion – Fits 10” to 25” (25 to 63cm) flange width, 1/2” to 3” (1.25 to 7.6cm) thick7006340: I-Beam Tie-Back Assembly



Horizontal & Vertical System

Iron Wing™ Portable Horizontal Lifeline Systems 7003020 (20’ [6m] Syste

The easy to install, fully customizable Iron Wing™ System is ideal for larger beams multi-span lengthy systems and is carefully engineered for continuous fall protection wgiving you freedom of movement. The 3-point claw/contact system offers reliability withtie-back – reducing trip fall hazards.

The all metallic system, designed for durability and safety, includes a 3/8” (9.5mm) 7

galvanized cable lifeline offset from the beam by 12” (30cm) for easy passage and eleva40” (100cm) high for use as a hand rail. Engineered for convenience as well as safety, can purchase a complete turnkey system or custom-design a system to fit your specificrequirements.

Customize Your System

7006606: Stanchion with energy absorber7006608: Stanchion - Intermediate

7006602: Stanchion - Standard7000000: Cable assembly with turnbuckle, 20-100’ (6-30m) lengths available in 10’ (3m) increments, (last 3 digits in part number detail lengt7001000: Cable with swage fitting, 20-100’ (6-30m) lengths available in 10’ (3m) increments, (last 3 digits in part number detail length).7006925: Front extension to fit 12”-18” (30-45cm) flange7006926: Front extension to fit 18”-24” (45-60cm) flange

• Two lightweight Iron Wing™ stanchions• Internal in-line energy absorber• 20’ (6m) cable assembly with turnbuckle• Fastening hardware• Standard size fits flanges 6”-12” (15-30cm)

wide; up to 1-1/4” (3.2cm) thickness• Extensions available to fit 12”-18” (30-

45cm) and 12”-24” (30-60cm) wide flanges

• Instructional video

Additional Lengths7003030: 30’ (9m) system7003040: 40’ (12m) system7003050: 50’ (15m) system7003060: 60’ (18m) system

I r o n W i n g c l e a r a n c e( r e q u i r e d a b o v e l o w e r l e v e l o r o b s t r u c t i o n )

s p a nl e n g t h

1-2 users6’ (1.8m) lanyard

1 - 2 u s e r sS RL

0-10’ (3m) 17’-6” (5.3m) 9’-6” (2.9m)

10’-20’ (3-6m) 18’-4” (5.5m) 10’-4” (3.1m)

20’-30’ (6-9m) 19’-2” (5.8m) 11’-2” (3.4m)

30’-40’ (9-12m) 19’-9” (5.9m) 11’-9” (3.5m)

40’-50’ (12-15m) 20’-7” (6.2m) 12’-7” (3.8m)

50’-60’ (15-18m) 21’-5” (6.4m) 13’-5” (4m)

PLEASE NOTE : Pleasesee product instructionmanual for completeclearance information or different user equipment scenarios.

Rebar & ShearConnector

StudConfigurations

Optional I-BeamBase Adaptor

Part# 7006335

P o r t a b l e H L L c l e a r a n c e( r e q u i r e d a b o v e l o w e r l e v e l

o r o b s t r u c t i o n )

span l e ng t h 1-2 users 6’ (1.8m) lanyard

0-10’ (3m) 17’-11” (5.4m)

10’-15’ (3-4.5m) 18’-7” (5.6m)

15’-20’ (4.5-6m) 19’-2” (5.8m)

20’-25’ (6-7.5m) 19’-11” (6m)

25’-30’ (7.5-9m) 20’-6” (6.2m)

30’-35’ (9-10.5m) 21’-2” (6.4m)

35’-40’ (10.5m-12m) 21’-10” (6.6m)

40’-45’ (12m-13.5m) 22’-6” (6.8m)

45’-50’ (13.5-15m) 23’-1” (7m)

50’-55’ (15-16.5m) 23’-10” (7.2m)

55’-60’ (16.5-18m) 24’-5” (7.4m)

PLEASE NOTE : Pleasesee product instructionmanual for completeclearance information or different user equipment scenarios.



BeamSafe™ Portable Horizontal Lifeline Systems

The BeamSafe™ system gives you an easy-to-install tie-off point before flooring orother fall protection is available. Position the BeamSafe™ system almost anywhere on beam for both fall protection and as a hand-rail for balance-for up to two people.nstallation is quick and easy, requiring just a standard wrench to assemble the two

bolts and a safety strap. Each stanchion, weighing less than 35 lbs. (16kg), mounts at

19 degree angle from the base to keep it out of the way while walking the beam.

Additional Lengths

7400530: 30’ (9m) system7400540: 40’ (12m) system

7400550: 50’ (15m) system7400560: 60’ (18m) system

7400520 Complete BeamSafe™ System

Two BeamSafe™ stanchions (anchors)

Zorbit™ energy absorber with turnbuckle 20 ft. (6m) cable assemblyFastening hardware

Fits flanges 6-1/2” - 24” (16.5-60cm) wide; up to 3/4” (1.9cm) thick Optional adapter fits to 26” (65cm) wide; 2-1/4” (5.7cm) thick Instructional video

B e a m s a f e c l e a r a n c e( r e q u i r e d a b o v e l o w e r l e v e l o r o b s t r u c t i o n )

s p a n le ng t h 2 users 6 ’ (1.8m) lanyard

0-10’ (3m) 17’-8” (5.3m)

10’-20’ (3-6m) 18’-11” (5.7m)

20’-30’ (6-9m) 20’-1” (6m)

30’-40’ (9-12m) 21’-4” (6.4m)

40’-50’ (12-15m) 22’-6” (6.8m)

50’-60’ (15-18m) 23’-8” (7.1m)

PLEASE NOTE : Pleasesee product instructionmanual for completeclearance informationor different user equip-ment scenarios.

Zorbit™ Energy Absorber for Horizontal Lifelines 7401031• Zorbit energy absorber comes complete with two shackles, bolts and nuts

making installation simple and easy• Allows you to customize your own system with added safety• Allows you to use a standard 5,000 lb. (22kN) Rated anchorage connector

such as our tie-off adaptor, xed beam anchor, D-ring anchorage plate, etc.• Meets or exceeds all applicable industry standards including OSHA and ANSI.

Similar Models:7401032: also includes a turnbuckle for tensioning of system7401033: includes turnbuckle for tensioning, thimble and cable clips for attaching cable (just add

your own cable)7401013: Zorbit only

Can you answer the following questions: How much clearance do I need? How will lifeline sag and span distanceffect the safety of my system? What forces will be generated on my end anchors? Do my anchorage connectorsnd support structure have sufcient strength?

Now you can! This revolutionary new shock absorber featured on our BeamSafe™ and cable Sayine™ systemss also available separately. In situations where a competent person understands the requirements needed,Zorbit™ can be attached to your own system to bring added safety to a previously unsafe system.

3

Customize your System7408801: Stanchion7402520: 20’ cable assembly w/ turnbuckle & Zorbit™ (other lengths available in 10’ increments, last 2 digits inpart number detail length)



Horizontal & Vertical System

Sayine™

Horizontal Lifeline System 7600502• Complete with kernmantle rope lifeline assembly

and tensioning device• Includes two tie-off adaptors for anchoring ends• Easily installed with no special tools or equipment• Lightweight, only 12 lbs. (5.4kg)• Rope lifeline assembly with tensioner• Two tie-off adapters• 20’ (6m) long• Carrying/storage bag

The cable Sayine system is highly portable and ideal for use in situations where welding, sparks or harsh envirments are present or where minimal clearance exists. This all-metal system is durable enough to be left in place

long periods and light enough to be moved easily from one job to another.

Sayine™ Horizontal Lifeline Systems : Simple, Reliable, & Safe.

The Sayine horizontal lifeline systems are not only lightweight and easy to install, they are also extremportable. Just disassemble and take to the next job. Engineered with DBI/SALA attention to quality and dethe Sayine systems will work alongside you during maintenance, bridge work, construction and manufactuwith absolute safety and reliability.

System length = 20 ft. (6m). Systems from 30’ to 100’(9m to 30m) are listed below

s y n t h e t i c S a y f l i n e c l e a r a n c e( r e q u i r e d a b o v e l o w e r l e v e l o r o b s t r u c t i o n )

s p a nl e n g t h

1 u s e r6 ’ ( 1 . 8 m )l a n y a r d

2 u s e r s6 ’ ( 1 . 8 m )l a n y a r d

1 u s e rS R L

2 u s e r sS R L

0-10’ (3m) 19’-1” (5.7m) 19’-5” (5.8m) 7’-11” (2.4m) 8’-11” (2.7m)

10’-20’ (3-6m) 19’-5” (5.8m) 21’-5” (6.4m) 8’-5” (2.5m) 10’-3” (3.1m)

20’-30’ (6-9m) 19’-9” (5.9m) 23’-4” (7m) 8’-10” (2.7m) 11’-6” (3.5m)

30’-40’ (9-12m) 21’-3” (6.4m) 25’-9” (7.7m) 9’-4” (2.8m) 12’-9”(3.8m)

40’-50’ (12-15m) 22’-6” (6.8m) 27’-11” (8.4m) 11’-3” (3.4m) 15’-6” (4.7m)

50’-60’ (15-18m) 23’-10” (7.2m) 30’-2” (9.1m) 13’-2” (4m) 18’-3” (5.5m)

System length = 20 ft. (6m). Systems from 30’ to 100’ (9m to 30m) listed below

c a b l e S a y f l i n e c l e a r a n c e( r e q u i r e d a b o v e l o w e r l e v e l o r o b s t r u c t i o n

s p a nl e n g t h

1 - 2 u s e r s6 ’ ( 1 . 8 m ) l a n y a r d

1 - 2 u s e rS R L

0-10’ (3m) 17’-11” (5.4m) 6’-11” (2.1m

10’-20’ (3-6m) 19’-2” (5.8m) 8’-0” (2.4m

20’-30’ (6-9m) 20’-6” (6.2m) 9’-1” (2.7m

30’-40’ (9-12m) 21’-10” (6.6m) 10’-2” (3.1m

40’-50’ (12-15m) 23’-1” (6.9m) 11’-4” (3.4m

50’-60’ (15-18m) 24’-5” (7.3m) 12’-5” (3.7m

7600503: 30’ (9m)system7600504: 40’ (12m) system7600505: 50’ (15m) system7600506: 60’ (18m) system

7600507: 70’ (21m) system7600508: 80’ (24m) system7600509: 90’ (27m) system7600510: 100’ (30m) syste

Additional Lengths

7602030: 30’ (9m) system7602040: 40’ (12m)system7602050: 50’ (15m)system7602060: 60’ (18m)system

7602070: 70’ (21m)system7602080: 80’ (24m)system7602090: 90’ (27m)system7602100: 100’ (30m)system

PLEASE NOTE : Please see product instruction manual for complete clearance information or different user equipment scenarios for both cable and synthetic lifelines.

Sayine™ Cable Horizontal Lifeline System 7602020• Complete with cable lifeline assembly and turnbuckle tensioner• Unique Wedge-Grip termination makes adjustment fast and easy - it

maintains constant pre-tension by eliminating cable slippage• Zorbit™ shock absorber allows for use of standard 5,000 lb. (22kN) rated anchorconnectors (tie-off adaptor, xed beam anchor, D-ring anchor plate, etc.)

• Tandem pulley #8800024 available as attachment point for SRL



Perimeter Debris Net SystemSingle Floor, Light Duty Net System

New from DBI/SALA : A Perimeter Debris Net System offering a complete system for rigging nets aroundthe perimeter of new, concrete buildings. The system utilizes a single floor attachment system, allowingcloser protection for the pour level.

Perimeter Net System Features : Starter and add-on kits include a 25’ (7.5m) wide net, oor clamps, 10’ (3m) arms, cables, shackles, strapsand related hardware

Nets are 10’ (3m) deep by 25’ (7.5m) wide with 1/8” (3.2mm) debris liner attached Non-destructive oor clamps are attached to concrete slabs 6” to 12” (15-30cm) thick, every 25’ (7.5m)Nets extend 10’ (3m) out from the edge of the oor on arms attached to the oor clamps, meeting standardsfor fall distance of up to 5’ (1.5m) ie: a fall from the working surface of the oor to which it is mounted

4” (10cm) nylon mesh nets provided with 1/8” (3.2mm) debris liners for debris such as tools, brick, andbuilding materials

Materials are re-usable and easily re-rigged. Less costly than other alternatives Component design and weight reduces installation time

Anchoring Points: Floor clamps are included in the starter and add-on kits which can be installed to concretelabs from 6” to 12” (15-30cm) thick. The arm is extended off the clamp supporting the cable and net system

Perimeter Net System Uses:• To contain jobsite debris from construction activities

including items at the pour level and during installationand removal of tables or forms

• To catch common items such as bricks, concrete blocks,hand tools, and general construction debris

• Provides protection to the public and adjacent propertiesbelow work areas

• Meets ANSI and OSHA standards by providing fallprotection from the working surface of the floor to

which it is mounted• For continuous protection, entire system can be movedup to the next floor level as construction progresses

• Provides visibility and ventilation• Security & safety for workers, the public, and equipment• Saves equipment from loss, destruction, or damage• Easily installed from one level without the use of a crane

or equipment

5



Netting System

Please Note:System not designed for :• Steel beam construction• When shape and design of building do not allow for standard installation of a net system

Starter Kit Contents:1 ea. net 10’ X 25’ (3 X 7.5m), 4” (10cm) mesh with 1/8” (3.2mm)debris liner & snap hooks2 ea. oor clamps2 ea. 10’ (3m) arms2 ea. 1/2” (12.7mm) shackles

8 ea. bolts6 ea. cable assemblies2 ea. straps with cam buckles

p e r i m e t e r d e b r i s n e t t i n g s y s t e m

m o d e l # d e s c r i p t i o n c o l o r

4100006 starter kit black

4100007 add-on kit black

4100005 corner kit black

Please Note: It is the user’responsibility to furnish andinstall cable according tofederal, state, and loca

regulations.

Add-On Kit Contents:1 ea. net 10’ X 25’ (3 X 7.5m), 4” (10cm) mesh with 1/8” (3.2mm)debris liner & snap hooks1 ea. oor clamp1 ea. 10’ arm (3m)1 ea. 1/2” shackle

4 ea. bolts3 ea. cable assemblies1 ea. strap with cam buckle

Corner Kit Contents:1 ea. net 10’ X 10’ X 15’ (3 X 3 X 4.5m), 4” (10cm) mesh with 1/8” (3.2mm) debris liner and snap hooks1 ea. cable assembly

Portable Guard Rail™ System A totally free standing, portable fall prevention system that requires nosurface attachment. Meets applicable OSHA and ANSI requirements.• Versatile, affordable fall protection - does not require engineered

anchor points• Skid resistant bases are light enough for one worker to move

• Bases incorporate built-in directional changes for rail, offeringcontinuous protection• Fast, easy installation - simply insert railing into base tting and tighten• UV resistant nish on all components, available in 6, 8 & 10’ (1.8, 2.4, &

3m) lengths

Portable Guard Rail™ Components and Systems:7900000: 6’ (1.8m) Guard Rail Section, 42” (106cm) high, one base7900001: 8’ (2.4m) Guard Rail Section, 42” (106cm) high, one base7900002: 10’ (3m) Guard Rail Section, 42” (106cm) high, one base7900004: Base Assembly with guardrail ttings7900010: 6’ (1.8m) Guard Rail Only7900011: 8’ (2.4m) Guard Rail Only7900012: 10’ (3m) Guard Rail Only7900005: Splice Kit for Guard Rail



The DBI/SALA Vertical Net Debris ContainmentSystem, when properly installed, is a completeperimeter net barrier designed for use on the open

loor construction areas of high-rise buildings as auardrail and toe board system. Hung along the

edge of the open floor areas, the Vertical Net Systemtops falling construction debris at the source.

lease Note: It is the user’s responsibility to furnish and install cable according to federal, state, and local regulations.

Vertical Net Uses: Eliminates need for mid-rail and toe board Contains debris using a tight mesh Acts as a wind barrier Provides a visual safety barrier using a brightorange color

Provides protection to the public and adjacentproperties below work areas

Vertical NetDebris Containment SystemPatent 4,875,549 and 4,815,562)

Vertical Net Features: Debris containment Edge protection When properly installed, system meets requirements of OSHA 1926.500 and 1926.502 Subpart M Meets requirements specied by NFPA 701 Made of polyethylene mesh Hardware option includes 55 EZ Clips and 22 Tie Down Plates Re-usable if properly removed and stored

Can easily be folded for storage or relocationAvailable in 100’ (30m) lengths and in 48” (1.2m) and 66” (1.7m) heights Signicant savings over wood or cable with toe boards

Easy Installation Works with traditional safety cable (not included) at top andfastened to floor at bottom

Top of net is attached with EZ clips 2’ (60cm) on center Bottom of net is secured with Tie-Down Plates 5’ (1.5m) oncenter using Power Actuated Fasteners

East to remove and relocate

v e r t i c a l n e t s y s t e m


4100200 48” (1.2m) H X 100’ (30m) L - no hardware orange

4100201 66” (1.7m) H X 100’ (30m) L - no hardware orange

4100300 48” (1.2m) H X 100’ (30m) L - with hardware orange

4100301 66” (1.7m) H X 100’ (30m) L - with hardware orange

4100003 Hardware Kit - 55 EZ-Clips, 22 Tie-Down Plates

7



Netting System

Adjust-A-Net uses:• To catch workers in areas left un-decked

during construction, across atriums, shaftsstairwells and skylights, during bridge con-struction, restoration projects and more

• To contain materials and other debris from workconstruction activities and decaying structures

• To provide protection to the public andadjacent properties below work areas

• To cover various size areas by joining multiplenets together with provided snap hooks

• When additional protection is needed fromlight weight debris such as tools, brick, andbuilding materials, 1/8” (3.2mm) debris linerscan be attached to the personnel net

Adjust-A-Net features• Four base sizes availablewith or without debris liner, each reduces innitely to t any application eliminat

need for numerous sizes• Staggered spacing of snap hooks on all sides allows any size net to be easily connected together• Snap hooks provide easy attachment to cable• Web-straps provided on two perpendicular sides to reduce net size for compact areas in minutes by

gathering the net on one or two sides• After thorough inspection, reuse Adjust-A-Net in a variety of applications as described

• Treated for UV protection and resistance to abrasion• Complies with ANSI A10.11/ANSI A10.37 and OSHA 1926.105/OSHA 1926.500 regulations• Personnel net made of nylon 3-1/2” (8.9cm) diamond, nylon mesh proven to withstand impact of 17,500

(70kN) foot-pounds

Anchoring points: Adjust-A-Net can be installed to steel or concrete using cable with related hardware (not included)

* When choosing net size, select the next largest net panel greater than area being covered. Consider larger size panels for future use and greater flexib

Adjust-A-Net™

Adjustable Personnel Net System(Patent 6,068,085)

Adjust-A-Net is a one-of-a-kind personnel net sys-tem that is specially designed to be easily adjustable,thereby fitting most workspaces where personnel

fall protection or debris containment is required.

a d j u s t - a - n e t


4100400 15’ X 30’ (4.5 X 9m) with 1/8” (3.2mm) liner black

4100401 20’ X 40’ (6 X 12m) with 1/8” (3.2mm) liner black

4100402 25’ X 50’ (7.5 X 15m) with 1/8” (3.2mm) liner black

4100403 30’ X 60’ (9 X 18m) with 1/8” (3.2mm) liner black

4100100 15’ X 30’ (4.5 X 9m) without liner black

4100101 20’ X 40’ (6 X 12m) without liner black

4100102 25’ X 50’ (7.5 X 15m) without liner black

4100103 30’ X 60’ (9 X 18m) without liner black

snaphooks and webstraps included



Modular Davit Arm Rescue System

Readily accessible and easy to use, the DBI/SALA Davit Arm is a modular system that fits completely into twobags. No piece is longer than 4 feet (1.2m) , allowing for easy storage in a vehicle locker. The bags are lightenough for two men to carry to the entry hole and assemble in less than 5 minutes.

The Davit Rescue System is constructed of anodized aluminum, zinc-coated steel and stainless to maximizestrength, minimize weight and resist corrosion. Computer-aided design and analysis eliminates unnecessarybulk by taking advantage of the newest manufacturing techniques.

The system is widely adaptable. The mast and boom readily adapt to interchangeable bases, providing anefficient mix-and-match system. The arm rotates 120º and locks into place allowing for easier access andremoval of personnel. The arm’s reach can be adjusted to 12, 18, or 24” (30, 45, or 60cm) to keep the lifelinecentered over the opening and for additional clearance.

Side by side pulleys withlock-down pins provideproper cable routing andsmooth operation whenlifting loads.

Reflective labeling onarm and legs improvesvisibility in low-lightconditions.

Portable base’s width can be adjusted to48, 54 or 60” (1.2, 1.4, or 1.5m) to fitvarious hole/entrance sizes.

Four independentleveling feet adjustup to 9” (23cm)for rough uneventerrain.

Stainless steel detent pinslock all components in placemaking assembly/ disassemblyquick and easy tool-free.

Two SALA Quick-Connect brack-

ets provide primary and back-upmounting points for mechanicaldevices. Each will accommodate apersonnel winch, materials hoist or3-way self retracting lifeline.

Integrated anchor ringprovides yet anotherauxiliary or back-upconnection point for aself retracting lifelineor rope grab system.

Built-in Level Indicator

Built-in lock-down screwallows the user to fixthe mast pole into placeeliminating rotation whenusing with fixed bases.

Complete user labelingincludes, identification,warnings, and set-upinstructions.

8000500 - Modular davit arm / mast and portable base8000055 - Modular davit arm / mast

8000056 - Modular Portable Base9500552 - Carry bag for Modular arm/mast and

portable base ( 2 bags required)8101000 - Winch, 60’ (18m), 1/4” (6.4mm) galv. cable,

bag mounting bracket3400115 - SRL with Retrieval, 50 ’ (15m) galv.,

bag, mounting bracket

8004031

Permanent Basefor Steel

8004032

Permanent Basefor Concrete

8004274Wall Mount Base(Bolt-On)

8004235Wall Mount Base(Weld-On)

8004392Post Mount Base

8000060Barrel Mount Base

8000059Flush Mount Basefor Concrete

8000057Hitch Mount Base

*Most bases available in

stainless steel

8003773Shelf Mount Base(use with 8004031)

Shown above : 8000500, 8101000, 3400115



Confined Space Equipme

Front & Rear of High Speed Unitswith Guide Trolley and Connection Hardware

Model 3303015 (Left) &Model 3303016 (Right)

pictured.

SALALIFT® Heavy-Duty Work Support & Rescue Winch 8101000

• Two independent centrifugal

brakes, one dead man type

brake

• Two-speed input: primary

6.6:1; secondary 3.3:1

• Steel gears within oil bath• Ball bearing type construction

• Heat treated cast aluminum

housing

• Load limiting input handle

• Level wind cable device

• 60’ (18m) long - 1/4” 6.4mm)

galvanized cable

• Quick-mount bracket

• Winch bag

• 6:1 gear ratio with avg. lifting

speed of 12.75 ft. (3.9m)/min.

• Lightweight (36 lbs. [16kg])

• Quick-mount bracket

• Free-wheel mode for operator

maneuverability

• Overload clutch

• Polyethylene housing cover

• Superior corrosion resistance

• Safety hook with impact indi-

cator

• Reserve lifeline• 60’ (18m) - 1/4” (6.4mm)

galvanized cable

• Winch bag

Sealed 3-Way SRL3400115

• Input handle with primary brake

• Overload device in winch drive

• Fall arrest capabilities in retrieval m

• Heat treated alloy steel gears, allo

steel shafting and sealed ball bear

• 50’ (15m) of 3/16” (5mm) galvansteel cable

• Steel indicating swivel hook

• Quick-mount bracket 3401065 and

carrying bag 9503515

SALALIFT® II Winch Lightweight WorkSupport & Rescue Device 8102001

Similar Models:

8102003: 60’ (18m) - 1/4” (6.4mm) stainless cable8102009: 90’ (27m) - 3/16” (5mm) galvanized cable8102011: 90’ (27m) - 3/16” (5mm) stainless cable8102005: 120’ (36m) - 3/16” (5mm) galvanized cable8102007: 120’ (36m) - 3/16” (5mm) stainless cable

Similar Models:

8101002: 60’ (18m) - 1/4” (6.4mm) stainless cable8101004: 120’ (36m) - 1/4” (6.4mm) galvanized cable8101006: 120’ (36m) - 1/4” (6.4mm) stainless cable

Similar Models:

3400108: with stainless steel ca3400311: 85’ (26m) galv. cable3400309: 85’ (26m) stainless3400509: 130’ (39m) galv. cable3400508: 130’ (39m) stainless st

Tripod & Accessor

Boatswain’s Chair 1001140

• 12”X24”X1” Seat board(30X60X2.5cm)

• 1-3/4” (4.4cm) wide latextreated polyester webbing• Cadmium plated alloy steel

hardware• #1001134: with belt (sized)

XX-Small : 24”-32” (60-80cm) waistX-Small : 28”-36” (70-90cm) waistSmall : 32”-40” (80-100cm) waistMedium : 36”-44” (90-110cm) waistLarge : 40”-48” (100-120cm) waistX-Large : 44”-52” (110-130cm) waistXX-Large : 48”-56” (120-140cm) waist

Salalift® II & Tripod Rescue System 8300030• UL classied 7’ (2.1m) aluminum tripod• Designed for durability and light weight; easy to set up and transp• Complete with quick mount bracket for Salalift® II winch attachme• Rated working load is 350 lbs. (157kg) for work support, 310 lbs.

(140kg) for fall arrest• Winch is designed for raising, lowering, work support or rescue• Anodized aluminum side plates, zinc plated gears and shafts, stain

steel springs and aluminum drum for superior corrosion resistanc• Overload clutch reduces chance of injury to entangled worker• Winch features 60’ (18m) of galvanized 1⁄4” (6.4mm) steel cable

Similar Models:8300032 : Tripod & winch with 90’ (27m) of 3/16” (5mm) galv. cab8300034 : Tripod & winch with 120’ (36m) of 3/16” (5mm) galv. ca8000000 : 7 ft. (2.1m) tripod only8102001 : Winch, 60’ (18m) of 1/4” (6.4mm) galv. cable, bag, mounting 8301000 : Tripod, 50’ (15m) SRL w/ retrieval, bag for SRL8304010 : Tripod, Salalift winch with 60’ (18m) of 1/4” (6.4mm) ga

cable, 50’ (15m) SRL w/ retrieval , leg mount pulley , bfor SRL and winch



FIRST™ Compliance in a Can

Protecta pioneered the creation of a com-plete fall protection system available in aconvenient container.

The success of the original Compliancein a Can spawned the creation of severaladditional congurations; each availablewith a different anchorage or decelerationdevice. All congurations are available assingle units, some are also available on a1/4 pallet of 16 units. Meets or exceedsOSHA and ANSI requirements; CE andCSA models also available.

m o d e l # h a r n e s s a n c h o r t y p er o p e a n dr o p e g r a b

s r l

AA7050A 3 point Roof Yes No

AA7051A 5 point Roof Yes No

AA7052A 3 point Concrete Yes No

AA7054A 3 point Wire Rope Sling Yes No

AA7056A 3 point Webstrap Sling Yes No

AA7057A 5 point Webstrap Sling No 11’ (3.4m) web

AA7058A 5 point Roof No 30’ (9m) cable

AA7061A 3 point Temporary HLL/Wire Rope Sling No No

AA7062A 3 point Temporary HLL/Wire Rope Sling No No

All Compliance in a Can versions are con-gured from a combination of the following

items :

• 3 or 5 point ‘Compliance’ harness• 50’ (15m) twisted rope lifeline• Rope Grab with attached shock

absorber • Reusable roof anchor • Concrete anchor & bolts• Wire rope sling anchor • Webstrap sling anchor • 11’ (3.4m) web self retracting lifeline• 30’ (9m) cable self retracting lifeline• 30’ (9m) or 60’ (18m) horizontal lifeline

system with wire rope sling anchors

AA700 Series Compliance in a Can™

1



Compliance in a Can™ Components (see table on opposite page for configurations)

Compliance in a Can Light

AJ720A Concrete Anchor & Bolts

AJ47410 Webstrap Anchor Sling

AJ47406 Wire Rope Sling

AC27350 50’ X .5” dia. Lifeline & Snaph AB17510 3-Point AB17530 5-Point AC27900 Rope Grab/SAL

AJ730A Roof Anchor

The AA7010AS Compliance in a CanLight adds a simpler choice to the se-lection of compliance products. Eachcontainer includes one AB17530harness and one AE57610 shock ab-sorbing lanyard

AD111A 11’ Web SRL AD212AG 30’ Cable S

Compliance Produc

AA7010AS Single Can



FIRST Harnesses

3

AB17510 3-Point Harness AB17530 5-Point Harness AB17560 5-Point Harness

AB101A20 Construction Model

Back View

AB104A20 Contractor Model

Back View

AA7060 Hot Work ™ Kit

• Vest style with back D-ring• Tongue buckle leg straps• Loops for body belt• 5 point adjustment• Size Universal (other sizes available)

• Vest style with back and side D-rings• Hip support pad with tongue

buckle belt• Shoulder pads and loops for belt• Tongue buckle leg straps• 5 point adjustment• Size Universal (other sizes available)

AB104A13 : Pass-thru buckle belt/legs

• AB101AK Nomex®/Kevlar® Harness• AJ47406 Wire Rope Sling, 6’ x 1/4”

galvanized coated cable• AD211B Rebel™ CT Self Retracting

Lifeline, 11’ x 3/16” galv. cable• AK061 Storage Bag

AA7059A: with AE554A Cable Shock Absorbing Lanyard instead of AD211B

The Protecta name has beenin the forefront of fall pro-tection for over 50 years. Itrepresents the best in fun-

damental fall protection atan exceptional value. It issupported by a commitmentto reliability, quality andeconomy. The Protecta brandof products serve as an excel-lent choice for turnarounds,scaffold erection and generalfacility maintenance. All har-nesses meet OSHA and ANSIrequirements; CE and CSAapproved models are alsoavailable.

The FIRST line from Protectaserve as an excellent choicefor turnarounds, scaffolderection and general facilitymaintenance.

• Vest style with backD-ring

• Pass-thru leg strapfor fast and easydonning

• 3 point adjustment• Size Universal

• Vest style with backD-ring

• Pass-thru leg strapfor fast and easydonning


• Vest style with backand side D-rings

• Tongue buckle legstraps for quickadjustment


PRO Construction Harnesses Hot Work™ Kits



Compliance Produc

Back View Back View Back Vi

AB101A Industrial Model AB2001A Industrial Model AB2004A13 Contractor Model

• Vest style with back D-ring (side Drings available on AB101A1)

• Pass-thru buckle leg straps• Loops for body belt• 5 point adjustment

• Size Universal (other sizes available)

• Vest style with back D-rings• Built-in back, shoulder and leg

padding• Quick-connect buckle chest/leg straps• Loops for body belt

• Integral lanyard keepers• 5 point adjustment• Size Universal (other sizes available)

• Vest style with back D-rings• Quick-connect body belt with hip pad

and side D-rings• Built-in back, shoulder, leg & hip paddin• Quick-connect buckle chest/leg straps

• Loops for body belt• Integral lanyard keepers• 5 point adjustment• Size Universal (other sizes available)

Silverback full body harnesses incorporate built-in shoulder, back leg padding for extra comfort. The integral lanyard keepers help seclanyards when not in use. Incorporates loops for optional body belt. Aeasy to use quick connect buckles makes donning fast and easy.

m o d e l n u m b e r t y p e D - r i n g s b u c k l e t y p e h i p p a d / b e l t b e l t / l o o p s a d j u s t m e

AB17510 First back pass-thru no no 3-point

AB17520 First back, side pass-thru no no 3-point

AB17530 First back pass-thru no no 5-point

AB17540 First back, side pass-thru no no 5-point

AB17550 First back tongue buckle no no 5-point

AB17560 First back, side tongue buckle no no 5-point

AB101A20 Construction back, side tongue buckle no no 5-point

AB104A13 Construction back, side pass-thru yes yes 5-point

AB104A20 Construction back tongue buckle yes yes 5-point

AB101A PRO back, side pass-thru no no 5-point

AB101A1 PRO back, side pass-thru no no 5-point

AB2001A Silverback back quick-connect no no 5-point

AB2001A1 Silverback back, side quick-connect no no 5-point

AB2004A13 Silverback back, side quick-connect yes yes 5-point

Pro full-body harnesses utilizeforged d-rings, built in toolbelt loops, and sewn-in impactindicators. 5-point adjustmentand a variety of sizes and options

help meet your worker’s needs.

PRO Harnesses Silverback™ Harnesses



Shock Absorbing Lanyards

Positioning lanyards are used to maintaina working position at height or to restrictmovement and avoid placement in a haz-ardous position. There are a number of different hook and length options avail-able. Rebar assemblies are designed to help position workers who are tying rebar in concrete forms orother similar activities. Connecting devices are designed to fit existing holes in most concrete forms.

Positioning Devices

Protecta manufactures a variety of shock absorbing lanyards, designed to reduce the impact forces placedon a body in the event of a fall. Double-leg shock absorbing lanyards offer the same protection and mobilityafforded by a single-leg lanyard, but by their design offer an added measure of security, by permitting theuser to be tied off 100% of the time during traverse. This, combined with a variety of anchorage options,ensures safety and reliability in your work environment. These products meet OSHA and ANSI standards; CEand CSA approved models also available.

AF77710 Rebar Assembly AL305A6 6’ X 1/2” Rope AL305AW16 - 6’ X 1” Web

AE550AW1

AE550AW2T AE549AW2 AE57620 AE57610

AE542AW1 CE550AW1-SN Pro-Stop AE560A6

m o d e l # t y p e m a t e r i a l single leg double leg t i e - b a c k l e n g t h c o n n e c t o r ( s )

AE542AW1 PRO 1” (25mm) Nylon Web X no 6’ (1.8m) 2 standard

AE550AW1 PRO 1” (25mm) Nylon Web X no 6’ (1.8m) 3 standard

AE549AW1 PRO 1” (25mm) Nylon Web X no 6’ (1.8m) 1 standard, 2 rebar

AE542AW2 PRO 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 2 standard

AE542AW2T PRO 1-3/4” (44mm) Polyester Web X yes-D-ring 6’ (1.8m) 2 standard

AE550AW2 PRO 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 3 standard

AE549AW2 PRO 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 1 standard, 2 rebar

AE550AW2T PRO 1-3/4” (44mm) Polyester Web X yes-D-ring 6’ (1.8m) 3 standard

CE542AW1-518 PRO 1” (25mm) 78k lb. Nylon Web X yes-carabiner 6’ (1.8m) 1 standard, 1 tie-back 5k lb. (22 kN)

CE550AW1-SN PRO 1” (25mm) 78k lb. Nylon Web X yes-carabiner 6’ (1.8m) 1 standard, 2 tie-back 5k lb. (22 kN)

AE560A6 PRO 1” (25mm) Tubular Nylon Web X no 6’ (1.8m) 2 standard

AE57610 FIRST 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 2 standard FIRST hooks

AE57620 FIRST 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 1 standard FIRST, 1 rebar

AE57630 FIRST 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 3 standard FIRST hooks

AE57640 FIRST 1-3/4” (44mm) Polyester Web X no 6’ (1.8m) 1 standard FIRST, 2 rebar

AL305AW16 Positioning 1” (25mm) Nylon Web X no 6’ (1.8m) 2 standard

AL305A6 Positioning 1/2” (13mm) Twisted Rope X no 6’ (1.8m) 2 standard

AF77710 Positioning Rebar Chain X no 20” (51cm) 2 standard FIRST, 1 rebar

5

For Tie-Back Use



Fall Arrest

m o d e l # l e n g t h l i n e t y p e connector h o u s i n g

AD111A 11’ (3.3m) web standard aluminum

AD111AR 11’ (3.3m) web standard aluminum w/swivel

AD111B 11’ (3.3m) web swivel aluminum

AD111BR 11’ (3.3m) web swivel aluminum w/swivel

AD111E 11’ (3.3m) web rebar hook aluminum

AD111ER 11’ (3.3m) web rebar hook aluminum w/swivel

AD211B 11’ (3.3m) galvanized cable swivel aluminum

AD107AP 20’ (6m) polyester web standard thermoplastic

AD210AS 30’ (9m) stainless cable standard thermoplastic

AD212AG 30’ (9m) galvanized cable standard thermoplastic


AD222AG 66’ (20m) galvanized cable standard thermoplastic


AD515AG 50’ (15m) galvanized cable twist-lock aluminum

AD211B 11’ Cable AD111A 11’ Web AD107AP 20’ Web AD212AG 30’ Cable AD515AG 50’ Cabl

Protecta self retracting lifelines aavailable with a wide variety lengths, cable types, and housingensuring that your needs are met regardless of your work environmenProtecta lifelines utilize stainless steor anti-corrosion coated parts, houings made from aluminum, impact-resistant thermoplastic, or painted steeand lightweight materials. Each modincludes a carabiner for attachment

your anchorage point.

These products meet OSHA and ANSstandards; CE and CSA approved models are also available. In addition, amodels come with a two year warranwith no recertication required.

AC202D Cobra® Rope Grab AC2000 Series Rope Lifelines

• High impact resistant steel

• 1.75 lbs. (.8kg) total weight• Automatic or manual mode• Accommodates 9/16”, 5/8”, or 3/4”

[14,16,19mm] rope (manual mode)• Can be used on approved

horizontal rope systems• Can be removed and reattached to

rope at any point during traverse• Complies with OSHA and ANSI

Z359; CE & CSA models available• Designed for use with nylon or

polyester rope

• 5/8” (16mm) twisted nylon ro• Standard snaphook• Standard lengths :

*Retrieval Mode

25’ (7.6m) : AC210A50’ (15m) : AC215A75’ (23m) : AC225A100’ (30m): AC230A125’ (38m): AC240A150’ (45m): AC245A175’ (53m): AC260A

Compliance Produc



Anchorage Devices

AJ730A Roof Anchor

• Forged alloy D-Ring• Zinc plated steel• Includes 20 16D

nails for single use• Reusable after

inspection with

new hardware• 3 lbs. (1.4kg)

total weight

AJ408AG Cable Sling Anchor

• 6’ X 1/4” (1.8m X 6.4mm) dia.coated wire rope

• Galvanized nish• One standard snap hook, one 3”

(7.6cm) diameter pass-thru ring

• Also available in stainless steel

AJ704A BeamDog Beam Anchor

• Light weight and easy to transport• May be used on top or below an

I-beam• Nylon rollers provide easy beam

traverses• Fully adjustable to accommodate

beams with anges 4” to 14.75” (10 to 37.5cm) wide and up to

1.5” (3.8cm) thick

AJ593A Twist Lock Carabiner

• 5,000 lb. (22kN) anchor• 2” (5cm) dia. opening• Carbon steel construction• Zinc plated• Captive-eye option• 1.4 lbs. (.63kg)

AJ514A Twist Lock Carabiner

• 5,000 lb. anchor• 3/4” (1.9cm) dia. opening• Forged steel construction• Galvanized nish• Twist lock closure• .4 lbs. (.18kg) total weight

AJ301A Handgrip

• 2” (5cm) capacity• 1/4” (6.4mm) diameter 302

stainless steel construction• One-hand operationSimilar Models :AJ302A - 3” (7.6cm) capacityAJ303A - 4” (10cm) capacity

AJ450A Web Sling Anchor

• 1-3/4” (4.4cm)wide nylonwebstrap

• 3” (7.5cm) scuff guard

• 2” & 3” (5 & 7.6cm)pass-thru D-rings

• Standard lengthsare 3’ & 6’ (.9 & 1.8m) for AJ450A6

• Custom lengthsavailable

AJ201A Builder’s Grip I-Beam Anchor

• Drop-forged eyebolt• Fits holes with

diameter of 3/4” to7/8” (19-22mm)

• Accommodatesthicknesses of 1-3/8” to 1-9/16” (35 to 39mm)

• Works verticallyor horizontally (withshock absorber)

• Available withattached shockabsorber and D-ring(AJ201AS2)

Protecta anchorage devices are designed to be adaptable to virtually any circumstance where connectionof a fall protection system to a suitable anchorage point is necessary. Each of these devices is rated at aminimum of 5,000 lbs. (22kN), and conforms to OSHA and ANSI Z359.1 standards for anchorage devices.

CE and CSA compliant models are also available.

7



Confined Space EquipmeProtecta Conned Space Equipment is suitable for entry into both vertical and non-vertical type spaces. It p

vides a means of controlled ascent and descent as well as protection from falls, should the depth of the sp

require it. All equipment shown meets OSHA and ANSI requirements for their specic equipment type.

s y s t e m n u m b e r t r i p o d w i n c h l e n g t h s r l p u l l e y h a r n e s s b a g

AA803AG AK105A AK203AG 30’ (9m) AD210AS 30’ (9m) Yes Yes No

AA803AG2 AK105A AK203AG 30’ (9m) AD210AS 30’ (9m) Yes Yes Yes

AA805AG AK105A AK205AG 50’ (15m) AD215AS 50’ (15m) Yes Yes No

AA815AG AK105A No N/A AD515AG 50’ (15m) Yes No No

AA805AG1 AK105A AK205AG 50’ (15m) AD215AS 50’ (15m) Yes No No

AA807AG2 AK105A AK207AG 75’ (23m) AD225AS 75’ (23m) Yes Yes Yes

AK105A Tripod

AK110AG Davit Arm

AA805AG2 Confined Space System

• Four eye-bolt anchors• 39 lbs. (17.5kg)• Leg position lock in head• Max. eye height 7’6” (2.3m)• One-man setup• Adjustable to eight different

heights• 65” (1.6m) overall height

when fully retracted• Anodized/cast aluminum

construction• Reective safety tape• Single anchorage point

rated at 5000 lbs. (22kN)• Skid-proof tread plate feet

• Man-rated at 310 lbs. (140kg)• 40’ (12m) winch cable• Collapsible and portable• Winch utilizes galvanized or

stainless steel cable• Permanent mount base• One-man setup• Anchorage point for self

retracting lifeline• 360º swivelling arm• Corrosion-resistant nish• Winch operates at 4:1 ratio

@ 20 fpm (6mpm)• Steel plate and tube

construction

• Cable tracking guide

Complete System Include

• AK105A tripod• AK205AG winch: 50’ (1• AD215AS SRL: 50’ (15m• AK020A1 Pulley• AB101A Harness• AK067A Tripod Carry ba

Please note : This is our popular system. Additsystem lengths are aable with or without harand tripod carry bag. the chart below or coDBI/SALA Protecta for information.

AK205AG 50’ Winch

• Man-rated at 310 lbs. (14• Available in 30’, 40’,

50’, 60’, 75’, and 110’ (9,12,15,18,23,33m) len

• Attaches to tripod with locking safety pins

• Utilizes galvanized orstainless steel cable

• Detachable handle• Installable on any tripo• Oil impregnated bearin• Manual safety lock• Corrosion-resistant ni• 4:1 ratio @ 20 fpm (6m• Four disc brakes

• 16 lb. (7kg) without ca

AD515AG SRL/Winch AK020A1 Pulley

• Operates in either fallarrest or retrieval mode

• 50’ (15m) working length• Utilizes 3/16” (5mm)

galvanized cable• Heavy-duty Zinc-coated

steel casing• One-step winch reversal• Must be used with separate

primary winch• Must be used with separate

attachment bracket (AK055A)• 21.6 lbs. (10kg)

• High strength aluminumalloy construction

• Sintered bronze bearing• Anodized gold nish• Includes AJ514A self-

locking carabiner• Total Weight with the

AJ514A is 1.2 lbs. (.54• Minimum breaking load

10,000 lbs. (45kN)• Accommodates rope &

cable sizes up to 1/2” (13m• Pivoting sheave pulley gu• Model AK020A - no carab

Compliance Produc



Training & Consulting Anytime, Anywhere... Our Site, or Yours!

When it comes to fall protection, there is nomargin for error. Every day, workers risktheir lives to acomplish elevated tasks thatare essential to the development and opera-tion of our world. From 1992-2000 therewere over 3,400 deaths due to falls fromheights.

DBI/SALA & Protecta recognize that ourcommitment to the life-and-death field offall protection means that every product weproduce must meet or exceed the tougheststandards. But we also know that even thebest equipment must be used correctly. Thisis why we have established our training divi-sion with the same care and attention that iscritical in our manufacturing process.

The key to effective fall protection training ispractical, hands-on experience. We offer afull range of fall protection and industrial res-cue courses on-site or at one of our state-of-the-art training centers located throughoutNorth America.

Courses on-site apply professional training tospecific daily work activities. Courses at ouinstitutes provide controlled environmentsuniquely designed to offer practical experi-ence with scaffolding, fixed ladders, tow-

ers, sloped roofs, rebar and climbing wallselevated catwalks, I-beams and confinedspaces.

Knowing your destination is only half the battle.

When preparing for a new project site or an existing one, ouronsulting services provides early identification of fall protection

hazards, solutions to minimize the risks and programs to imple-ment training and inspection.

Examples of our consulting services include;

• Site Surveys• Fall Protection Program Development• Manual and Training Development• Equipment Inspection

9



Training & Consulting Servic

DBI/SALA & Protecta Comprehensive Training Progra

Custom Courses

Some clients are in particular situations where they do not appear to fit thegeneric courses offered by any of the training organizations. Often whatthey really need is a combination or parts of several courses. Through our

consulting services, DBI/SALA & Protecta offer course customization wherecourses are developed for specific client site requirements.

In addition, we have specialty courses that are designed for a particu-lar trade or industry’s work requirements. Examples of specialty coursesinclude: Confined Space entry and retrieval, Oilfield Rig Workers aware-ness, Rig Rescue, Tower Climbing/Rescue and more. For more details oncustomized site specific training and specialty courses please contact us.

course duration audience benetopen

enrollmentsite

spec

Awareness 4 hours Workers who are seldom at heightProvides general awareness, inter-est and support

no ye

System Specific 4 hoursWorkers who use a single pre-engi-neered and pre-installed fall protec-tion system

Provides the skills and theory nec-essary for that single system

no ye

Fundamentals 1 dayWorkers who use a number of pre-determined systems with estab-lished anchorages

Establishes an understanding of the systems available on-site andwhere they are to be used

no ye

Competent Skills 2 days

Workers who are at a variety of locations, often skilled trades (main-tenance, electricians, etc.) usingpersonal judgment in the selection,setup and use of fall protectionincluding temporary anchorages

Develops a “toolbox” of skills andknowledge to work safely whenthere isn’t a predetermined systemor anchorage

yes ye

Competent Person 4 days

Individuals charged with the devel-opment, implementation and /ormaintenance of a site fall protectionprogram

Creates the necessary skill andknowledge base to meet therequirements for a competent per-son as defined by OSHA

yes ye

Qualified Person 5 daysEngineers charged with the designand setup of engineered fall protec-tion systems

Details the technical requirementsto design engineered systems

yes ye

EquipmentInspection

4 hoursSafety personnel, tool crib operatorsor anyone who is required to com-plete formal equipment inspections

Provides the skills and knowledgenecessary to complete a formalinspection

yes ye

Competent Trainer 5 days Established site trainersBuilds the techniques, theory andmaterials to teach the four hourawareness course

yes ye

Competent TowerClimber

2 daysWorkers who are required to climband work on towers both for erec-tion and maintenance

Skills to properly protect oneself when working on the tower andwhile performing a rescue on thetowers

no ye

Industrial Rescuecustom to siterequirements

Site rescue teams and/or peer res-cue training

Provides the skills to safely retrievea fallen worker

no ye



On-Site Demonstration Vehicles

Workers from all over the world enjoy the experience of our hands-onemonstrations of DBI/SALA & Protecta fall arrest, restraint and rescue

equipment. Our Mobile Demonstration Vehicles show drop-tests andorce measuring instruments to demonstrate arresting forces workerswould experience during a fall.

With our total safety systems approach, the four basic components of apersonal fall arrest system will be discussed. The ABCD’s as we call it,

nclude the anchorage, body support, connectors and descent/rescue.The presentation provides an excellent introduction to fall protectionequipment.

B • Body SupportFull body harnesses provide a connection point on the worker for the personal fall arrest system. Depending upon the application, they can be used as part of a system to protect theworker from falling and to limit the extent of potential injury in case of a fall.

Fall protection is a complicatedissue and one of the most impor-tant faced by an employer or work-site supervisor. With over 100,000reported incidents per year, falls

from heights almost always resultin serious injury. In the construc-tion industry, falls are the numberone cause of worker death. DBI/SALA and Protecta understandsthese issues and offers its exper-tise on-site with specialized dem-onstration vehicles.

A • AnchorageAnchorage means a secure point of attachment (structure) for the fall arrest system. The type ofanchorage varies with the industry, the job being performed, the type of installation and most impor-tantly the structure available. Anchorage connectors provide a means of attaching the system to theanchorage. DBI/SALA & Protecta offer a wide line of anchorage connectors for all applications.

THE ABCD’s of Fall Arrest

OSHA says…

[1926.502(d)(15)(i)-(ii)]: “Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 lb. (22kN) per employee attached, or shall be designed, installed and used as follows: …as part of a complete personal fall arrest system which maintains a safety factor of at least two; …under the supervision of a qualified person.”

OSHA says…[1926.502(d)(16)(iii), (iv), (v)]: “Personal Fall Arrest Systems, when stopping a fall, shall limit maximum arrestingforce on an employee to 1,800 lbs.(8 kN) when used with a body harness; be rigged such that an employee canneither free-fall more than 6-feet (1.8 M), not contact any lower level.”

1

Call today for an on-site demo !



On-Site Demonstrations & Training Too

Training To

OSHA says…[1926.502(e)(3)]: “Connectors shall be drop forged, pressed or formed steel or made of equivalent materia

[1926.502(e)(5)]: Connecting assemblies shall have a minimum tensile strength of 5,000 lbs. (22 kN).”

As part of an ongoing DBI/SALA and Protecta commitment to improving on-the-job safety, we have together a booklet and video giving an overview of the fall protection basics that serve as the foundation oeffective fall protection program.

The 20 page “Thinking About Fall Protection” booklet includes:

• Fall Protection Terminology• Fall Prevention and Types• Fall Arrest Systems• Calculating Fall Clearance• Swing Fall Hazards• Equipment Inspection and Maintenance• 8-Step Fall Protection Plan• Understanding Fall Protection Applications• Harness Sizing and Donning

• Compatibility of Connectors• Training, Regulations and Standards

The 20 minute “Thinking About Fall Protection” video includes many of the same topics as thebooklet in addition to an in-depth review of the ABCD’s.

Order “Thinking About Fall Protection” Today!• Booklet - English (part# 9700041)• Booklet - Spanish (part# 9700068)

• Video - VHS (part# 9700070)• Video - DVD (part# 9700071)

C • ConnectorsConnectors are devices used to connect the worker’s full body harness to the Anchor systConnectors include lanyards, snap-hooks, carabiners, deceleration devices and specialty tems such as self-retracting lifelines, ladder climbing systems, vertical lifelines and rope gas well as horizontal lifeline.

D • Descent & RescueRescue, the retrieval of a fallen worker or the self-rescue of workers, is a necessary componof any fall protection program. OSHA requires that where a worker is exposed to the risk fall, a rescue plan must be in place for the self-rescue or retrieval of that fallen worker.

Remember, these components individually will not provide protection from a fall. They must be uin conjuction with each other, and used properly. Together, they form a complete personal fall arsystem providing maximum worker protection.

OSHA says…[1926.502(d)(20)]: “The employer shall provide for prompt rescue of employees in the event of a falshall assure that employees are able to rescue themselves.”



Calculating Fall Clearance

Swing-Fall Hazard

LL = LANYARD LENGTH

DD = ENERGY ABSORBER DECELERATION

DISTANCE (3 1/2 FEET TOTAL)

HH = HEIGHT OF THE HARNESS DORSAL D-RING

FROM THE WORKER’S FEET

C = CLEARANCE TO OBSTRUCTION DURING FALL

ARREST (1 1/2 FET REQUIRED PLUS 1 FOOT

FOR D-RING MOVEMENT AND SYSTEM

MATERIALS STRETCH = 2 1/2 FEET TOTAL)

RD = REQUIRED DISTANCE BELOW WORKING

SURFACE TO NEAREST OBSTRUCTION

RD = LL + DD + HH + C

LL

C

DD

RD

HH

NEAREST OBSTRUCTION

Lanyard Fall Clearance

When setting up and using a personal fall arrest sys-em, fall clearance and swing fall hazards are criticalssues. Should a fall occur, there must be sufficientlearance below the user to arrest the fall before the

user strikes the ground or any other object. The user

of the equipment must determine if the system willrrest the fall within the available clearance. Someactors that affect this determination include anchor-ge location, type and length of connecting systemlanyard, self-retracting lifelines, rope grab), decel-

eration distance (the elongation of the deceleratingevice when deployed -- allow 3.5’), worker height,

movement of harness attachment element (allow aafety factor of 2.5 ft.).

For lanyard type connecting systems, see the illus-ration for estimating fall clearance distances. For

SRLs, a minimum of 6’ of clearance from the work-

ng level to the lower level is recommended.

See user instructions supplied with each product for com-plete details on fall clearances.

D = Distance person can move (horizontally)

Example: If the worker is 40 feet directly below theSRL, the recommened work zone is 18 feet in anydirection.

H

=

H e i g

h t o f t h e

S R L

( o v

e r h e a d )

80’

70’

60’

50’

40’

30’

20’

10’

0’

0’ 10’ 20’ 30’ 40’

Working Distance From Anchorage

Swing FallHazard

WorkingLevel

SRL Swingfall

H

D

Swing falls occur when the anchor-

age point is not directly above the

point where a fall occurs. The force

of striking an object while swinging

(horizontal speed of the user due to

pendulum effect) may cause seri-

ous injury. In a swing fall, the total

vertical fall distance will be greater

than if the user had fallen when

directly below the anchorage point.

The user must therefore account for an

ncrease in the total free fall distance.

SRLs provide greater horizontal and

vertical mobility than lanyards, increas-ng the opportunity for swing falls. See

the adjoining chart for recommended

horizontal working distances for SRLs.

Minimize swing falls by working as

close to directly below the anchorage

point as possible.

See user instructions supplied with eachproduct for complete details on swing fall.

3



Other Important Consideratio

Fall Protection Regulations and StandaSELECTED OSHA FALL REGULATIONS

Fall Protection Requirements for Steel Erection(OSHA Subpart R1926.760)

(a) General requirements. (1) Except as provided by paragraph (a) (3)of this section, each employee engaged in a steel erection activity whois on a walking/working surface with an unprotected side or edge morethan 15 feet (4.6m) above a lower level shall be protected from fallhazards by guardrail systems, safety net systems, personal fall arrestsystems, positioning device systems or fall restraint systems.

Safety Standards for Fall Protection in the Construction Industry (OSHA 1926.501 - Duty to have fall protection)

(a) General. (1) This section sets forth requirements for employers toprovide fall protection systems. All fall protection required by this sec-tion shall conform to the criteria set forth in 1926.502 of this subpart.

(b)(1) Unprotected sides and edges. Each employee on a walking/working surface (horizontal and vertical surface) with an unprotectedside or edge which is 6 feet (1.8m) or more above a lower level shall beprotected from falling by the use of guardrail systems, safety net sys-tems, or personal fall arrest systems.

Editors Note: The requirements stated in (b)(1) are similar for: leadingedges, hoist area, holes, formwork and reinforcing steel, ramps, run-

ways and other walkways, excavations, dangerous equipment, overheadbricklaying and related work, roofing work on low-slope roofs, steeproofs, precast concrete erection, residential construction and wall open-ings.

(OSHA 1926.502 - Fall protection system criteria and practices)

(a) General. (1) Fall protection systems required by this part shall com-ply with the applicable provisions of this section.

(2) Employers shall provide and install all fall protection systemsrequired by this support for an employee, and shall comply with all otherpertinent requirements of this subpart before that employee begins thework that necessitates the fall protection.

(d) Personal fall arrest systems. Personal fall arrest systems and theiruse shall comply with the provisions set forth below. Effective January1, 1998, body belts are not acceptable as part of a personal fall arrest

system. Note: The use of a body belt in a positioning device system isacceptable and is regulated under paragraph (e) of this section.

(5) Snaphooks shall be sized to be compatible with the member towhich they are connected to prevent unintentional disengagement of thesnaphook by depression of the snaphook keeper by the connected mem-ber, or shall be a locking type snaphook designed and used to preventdisengagement of the snaphook by the contact of the snaphook keeperby the connected member. Effective January 1, 1998, only locking typesnaphooks shall be used.

(15) Anchorages used for attachment of personal fall arrest equipmentshall be independent of any anchorage being used to support or suspendplatforms and capable of supporting at least 5,000 pounds (22.2 kN) peremployee attached, or shall be designed, installed, and used as follows:(i) as part of a complete personal fall arrest system which maintains asafety factor of at least two; and(ii) under the supervision of a qualified person.

(16) Personal fall arrest systems, when stopping a fall, shall:(i) limit maximum arresting force on an employee to 900 pounds (4 kN)when used with a body belt;(ii) limit maximum arresting force on an employee to 1,800 pounds (8kN) when used with a body harness;(iii) be rigged such that an employee can neither free fall more than 6feet (1.8m), nor contact any lower level;(iv) bring an employee to a complete stop and limit maximum decelera-tion distance an employee travels to 3.5 feet (1.07m); and,(v) have sufficient strength to withstand twice the potential impact ener-gy of an employee free falling a distance of 6 feet (1.8m), or the freefall distance permitted by the system, whichever is less.

(e) Positioning device system. Positioning device systems and their useshall conform to the following provisions:(1) Positioning devices shall be rigged such that an employee cannotfree fall more than 2 feet (.9m).

(2) Positioning devices shall be secured to an anchorage capable of sporting at least twice the potential impact load of an employee’s fall 3,000 pounds (13.3 kN), whichever is greater.

(OSHA 1926.503 - Training requirements)

(a) Training Program. (1) The employer shall provide a training progrfor each employee who might be exposed to fall hazards.The programshall enable each employee to recognize the hazards of falling and shtrain each employee in the procedures to be followed in order to minmize these hazards.

Fixed Ladders (OSHA 1910.27)

(d.5) Ladder safety devices may be used on tower, water tank and chney ladders over 20 feet in unbroken length in place of cage protectiNo landing platform is required. All ladder safety devices, such as thothat incorporate life belts, friction brakes, and sliding attachments, mmeet the design requirements of the ladders they serve.

Powered Platforms For Building Maintenance (OSHA 1910.66)

(j) Personal Fall Protection. Employers must provide personal fall arresystems meeting the requirements outlined. Requirements include thfollowing:

Anchorages to which personal fall arrest equipment is attached shall capable of supporting at least 5,000 pounds (22.2 kN) per employeeattached, or shall be designed, installed and used as part of a complpersonal fall arrest system which maintains a safety factor of at leasttwo, under the supervision of a qualified person.

Personal fall arrest systems shall, when stopping a fall: 1) limit maximum arresting force on an employee to 900 pounds (4 kN) when usewith a body belt; and 2) limit maximum arresting force on an emploto 1,800 pounds (8 kN) when used with a body harness.

Personal fall arrest systems shall be rigged such that an employee caneither free fall more than 6 feet (1.8m), nor contact any lower leve

Personal fall arrest systems or components subjected to impact loadishall be immediately removed from service and shall not be used agafor employee protection unless inspected and determined by a competent person to be undamaged and suitable for reuse.

Before using a personal fall arrest system, and after any component system is changed, employees shall be trained in accordance with threquirements of paragraph 1910.66(i)(1), in the safe use of the syst

Personal fall arrest systems shall be inspected prior to each use for mdew, wear, damage and other deterioration. Defective components shbe removed from service if their strength or function may be adverseaffected.

Permit-Required Confined Spaces (OSHA 1910.146)

(a) Scope and application.This section contains requirements for practices and procedures to protect employees in general industry from thazards of entry into permit-required confined spaces.

(k)(3) To facilitate non-entry rescue, retrieval systems or methods shbe used whenever an authorized entrant enters a permit space, unlethe retrieval equipment would increase the overall risk of entry or wonot contribute to the rescue of the entrant. Retrieval systems shall mthe following requirements:(i) Each authorized entrant shall use a chest or full body harness, wiretrieval line attached at the center of the entrant’s back near shouldlevel, above the entrant’s head, or at another point which the employcan establish presents a profile small enough for the successful remoof the entrant. Wristlets may be used in lieu of the chest or full bodyharness if the employer can demonstrate that the use of a chest or fbody harness is infeasible or creates a greater hazard and that the uof wristlets is the safest and most effective alternative.(ii) The other end of the retrieval line shall be attached to a mechanical device or fixed point outside the permit space in such a manner trescue can begin as soon as the rescuer becomes aware that rescue necessary. A mechanical device shall be available to retrieve personnfrom vertical type permit spaces more than 5 feet deep.



Fall Protection Regulations and Standards (continued)

SELECTED ANSI STANDARDS

Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components

(ANSI Z359.1-1992)

1.1 Scope - This standard establishes requirements for the performance,design, marking, qualification, instruction, training, inspection, use,maintenance and removal from service of connectors, full body har-nesses, lanyards, energy absorbers, anchorage connectors, fall arresters,vertical lifelines, and self retracting lanyards comprising personal fallarrest systems for users within the capacity range of 130 to 310 lbs. (59to 140 kg.).

1.2.1 This standard addresses only personal fall arrest systems (PFAS)incorporating full body harnesses. Whenever the term “system” is usedin the standard it refers to a personal fall arrest system.

3.1.2 When subjected to tests contained in 4.2, a personal fall arrestsystem in which a full body harness is used shall produce a maximumarrest force (MAF) of not more than 1,800 pounds (8.0kN) and shallbring the fall to a complete stop with a deceleration distance of not morethan 42 inches (1,067 mm). In suspension, after the fall is arrested, theangle at rest which the vertical center line of the test torso makes withthe vertical shall not exceed 30 degrees.

3.2.1.4 Snaphooks and carabiners shall be self closing and self-lockingand shall be capable of being opened only by at least two consecutivedeliberate actions.

3.2.2.4 The harness shall provide support for the body across the lowerchest, over the shoulders and around the thighs when a tensile loadis applied to the fall arrest attachment elements. The harness, whenproperly fitted and used, shall prevent fall-out.The fall arrest attachmentshall be located at the back (dorsal) position.

3.2.4.7 When energy absorbers are dynamically tested in accordancewith 4.3.5.2, the maximum arrest force shall not exceed 900 lbs. (4 kN).

3.2.8.7 Static Strength - When tested in accordance with 4.3.7.3, theSRL shall withstand a tensile load of 3,000 pounds (13.3 kN) staticallyapplied directly to the point of SRL line connection to the SRL drum.

3.2.8.9 Dynamic Performance - When tested in accordance with 4.3.7.1,

the SRL shall lock and remain locked until released.The arrest distanceshall not exceed 54 inches (1,372 mm). Maximum arrest force shall notexceed 1,800 pounds (8 kN).

5.1.2 The legibility and attachment of required markings shall endure forthe life of the component, subsystem, or system being marked.

5.3.1 Instructions shall be provided to the user, printed in English, andaffixed to the equipment at the time of shipment from the manufacturer.

Ladder Safety Devices (ANSI A14.3-2002)

7.1.3 The ladder safety system shall be designed to absorb the impact of a solid object weighing at least 500 pounds in a free fall of 18 inches.

7.1.4 Design and installation of mountings shall not reduce the strengthof the fixed ladder.

7.3.1 The safety sleeve shall be a type which can be operated entirelyby the person using the ladder safety system. It shall permit the personusing the ladder safety system to ascend or descend without having tocontinually manipulate the safety sleeve.

7.3.3 The maximum length of the connection between the centerline of the carrier and the point of attachment to the full body harness shall notexceed 9 inches.

SELECTED CSA FALL PROTECTION STANDARDSSafety Belts and Lanyards (CSA Z259.1-95)

1.1 Scope - This standard covers safety belts of tongue buckle type andlanyards. It may be applied to an assembly consisting of a belt with anattached lanyard, or to a belt alone, or to a lanyard alone.

4.1 Belts covered by this standard should be used for travel restrictionand work positioning only, and should not be used as body support in a

fall arrest system due to the possibility of death or injury from the fol-lowing causes” a) fallout from the belt; b) effects of extended static sus-pension in a belt; or c) abdominal injuries.

6.2.1.1... the attachment hardware shall have a minimum breakingstrength of 22kN.

Fall Arresters, Vertical Lifelines, and Rails (CSA Z259.2. 1-98)

1.1 Scope - This standard provides design and performance require-ments for manufactured fall-arresting devices, vertical lifelines, and rigidsections, including mounting components.

3.1 Classifications- Fall arresters shall be classified as follows: Class AD-(automatic-dorsal). Class AS- (automatic- sternal). Class ADP - (auto-matic - dorsal - panic hardware). Class MDP - (manual - dorsal - panichardware).

4.2.5 Class AD fall arresters shall have an integral connecting linkage of 0.6m or less.

4.2.6.1 Class AS fall arresters shall be used with a connecting linkage of 0.2m or less.

Full Body Harnesses (CSA Z259.10-M90)

1.1 Scope - This standard covers full body harnesses intended for useas body supports in personal fall arrest systems and in other work situa-tions that involve the risk of falling.

3.1 General Classification - Full body harnesses shall be classified as fol-lows: A - Fall Arresting, D - Controlled Descent, E - Confined Entry andExit (raising and lowering), L -Ladder Climbing (frontal attachment), P- Work Positioning.

4.2.2.1.1 When tested to destruction, the attachment hardware shallhave a minimum breaking strength of 22 kN.

7.2 Special Marking - Special marking shall be required to indicate theonly attachment point for a fall arresting application.

Shock Absorbers for Personal Fall Arrest Systems(CSA Z259.11-M92)

1.1 Scope - This standard outlines the requirements for testing the per-formance and strength for shock absorbers that absorb and dissipatekinetic energy when used as a componentof a personal fall arrest system (FAS).

5.3 Dynamic Drop Test - ....a shock absorber shall limit the maximumarrest force to 4.0kN .

5.4 Final Static Resistance Test - ....a shock absorber must be capable of supporting a load of 22 kN for a period of 5 min.

Self-Retracting Devices for Personal Fall-Arrest Systems (CSA-Z259.2.2-98)

1.1 Scope - This standard specifies the requirements for all self-retract-ing devices (SRDs) used as connecting components in personal fall-arrest systems. SRDs are further classified in this Standard according tomethod of use and effective length.

3.1 Classification - Self-retracting devices (SRDs) shall be classified bytype as follows: a) Type 1 (SRL) A Type 1 device shall be classified asa self-retracting lanyard (SRL). A SRL shall have a working length of between 1.5 and 3.0m. b) Type 2 (SRL) A Type 2 device shall be classi-fied as a self-retracting lanyard (SRL). A Type 2 SRL shall generally havea working length of more than 3.0m. c) Type 3 (RSRL) A Type 3 deviceshall be classified as a self-retracting lanyard with retrieval function(RSRL). A RSRL shall have a working length of more than 3.0m and befitted with a retrieval device.

5.2.1 Dynamic Performance - When tested... the Type 1 SRL shall suc-cessfully arrest the fall.The arrest distance shall not exceed 1.0m.

5.3.1 Dynamic Performance - When tested...the Type 2 SRL/Type3 RSRLshall remain locked until released.When released the Type 2 SRL/Type3RSRL shall exhibit normal operation. The arrest distance measuredwhen the test weight comes to reat shall not exceed 1.4m Themaximum arrest force (MAF) measured by the load cell shall not exceed

8kN.

5



Other Important Consideratio

No



f a l l p r o t e c t i o n e x p e r t s

DBI/SALA & PROTECTA3965 Pepin Avenue • Red Wing, MN 55066-1837

Phone : 651.388.8282 • Fax : 651.388.5065

Toll-Free (US) : 800.328.6146e-Mail : [email protected]

See us on the web at :www.dbisala.com - or- www.protecta.com

CSG Canada Ltd.260 Export Blvd. • Mississauga, Ontario L5S 1Y9 Canada

Phone : 905.795.9333 • Fax : 905.795.8777Toll-Free : 800.387.7484

e-Mail : [email protected]

CSG EMEA (France)ZI - BP 15 • 06517 Carros Cedex • Nice, France

Phone : +33 (497) 102100 • Fax : +33 (492) 080338

e-Mail : [email protected]

CSG Australia Ltd.20 Fariola Street • SliverwaterSydney, NSW 2128 • Australia

Phone : +61 (2) 9748 0335 • Fax : +61 (2) 9748 0336M il l @ it l f t

CSG Northern Europe Ltd.7 Christleton Ct. • Stuart Rd. • Manor Park. • Runcorn

Chesire WA7 1ST • United KingdomPhone : +44 (1928) 532010 • Fax : +44 (1928) 571325

M il i f @ k

Documents

Catalog Construction