Cat Prisma G MG

Prisma Plus LV Switchboards Devised to save time

Catalogue System G

General contents

Index General presentation

2 8

System G Pack

10

System GGeneral presentation Installation and connection of units in the switchboard Installation and connection of units in the duct Choice of enclosure Distribution, connection, accessories

17

Dimensions

133

Characteristics

145

1

Index

Cat. no Designation

Pages

0300003001 03002 03003 03004 03005 03008 03010 03011 03030 03031 03032 Modular device rail Adjustable modular device rail 45, 48, 52, 53 35, 37, 39, 43, 45, 48, 54, 117 Recessed modular device rail 39, 49, 54 Rear modular device rail 13, 48, 49, 54, 117 45 DIN rail support 117, 119 13 Modular device rail for NSA in Pack enclosure Modular device rail, L=250mm 62, 64, 66 59, 61, 62, 64, Adjustable modular device rail, L=250mm 65, 66 Mounting plate for horizontal fixed NS-INS250 with 34, 38 toggle Mounting plate for horizontal fixed NS250 with 36 rotary handle Mounting plate for horizontal fixed NS250 with 34, 36, 39 motor mechanism or horizontal plug-in NS250 with toggle Mounting plate for horizontal fixed Vigi NS250 with 34 toggle Mounting plate for vertical fixed NS250 with toggle 35, 39 Mounting plate for vertical fixed NS250 with rotary 37 handle Mounting plate for NS-INS250 source changeover 40, 41 system with rotary handles Mounting plate for vertical fixed NS-INS250 with 58, 60 toggle, W=250mm Mounting plate for vertical fixed NS-INS250 with 58 rotary handle, W=250mm Mounting plate for horizontal fixed NS630 with 32, 38 toggle Mounting plate for vertical fixed NS-INS630 with 33, 39 toggle Mounting plate for vertical fixed NS630 with rotary 33 handle Mounting plate for vertical fixed NS-INS630 with 58, 60 toggle, W=250mm Mounting plate for vertical fixed NS-630 with rotary 58 handle, W=250mm Mounting plate for INF32/40 42, 43 42, 43 Mounting plate for INF63-160 20 M4 clip-nuts for DIN rails 55, 67 20 M5 clip-nuts for DIN rails 55, 67 20 M6 clip-nuts for DIN rails 55, 67 49 Mounting plate for Tego Power Slotted mounting plate, 4 modules, for wall-mount 54 or floor-standing enclosure Recessed slotted mounting plate, 4 modules, for 49, 54 wall-mount or floor-standing enclosure Recessed slotted mounting plate, 6 modules, for 13, 49, 54 wall-mount or floor-standing enclosure Recessed slotted mounting plate, 9 modules, for 54 wall-mount or floor-standing enclosure Slotted mounting plate, 4 modules, W=250mm 65, 66 66 Recessed slotted mounting plate, 4 modules, W=250mm Recessed slotted mounting plate, 6 modules, 66 W=250mm Recessed slotted mounting plate, 9 modules, 66 W=250mm 20 M4 clip-nuts for slotted mounting plates 55, 67 55, 67 20 M5 clip-nuts for slotted mounting plates 20 M6 clip-nuts for slotted mounting plates 55, 67 55, 67 20 M5 self-tapping screws for functional unit mounting 4 M5 hexagonal spacers, H=9mm 55, 67 55, 67 4 M5 hexagonal spacers, H=23mm 4 M5 hexagonal spacers, H=55mm 55, 67 20 captive nuts for M6 hexagonal spacers 55, 67, 124 4 M6 hexagonal spacers, H=9mm 55, 67, 117, 119

Cat. no 03196 03197 03198 03199 03202 03203 03204 03205 03213 03214 03220 03221 03230 03231 03232 03233 03234 03235 03236 03237 03238 03241 03243 03244 03245 03247 03248 03249 03250 03251 03252 03253 03270 03271 03273 03274 03275 03276 03277 03280 03281 03282 03283 03312 03313 03314 03315 03342 03343 03344

03033 03040 03041 03043 03050 03051 03070 03073 03074 03080 03081 03113 03114 03164 03165 03166 03168 03170 03171 03172 03173 03175 03176 03177 03178 03180 03181 03182 03183 03185 03186 03187 03194 03195

Designation 4 M6 hexagonal spacers, H=23mm 4 M6 hexagonal spacers, H=55mm 4 M6 hexagonal spacers, H=25mm 4 M8 hexagonal spacers, H=40+10mm Modular front plate, 2 modules Modular front plate, 3 modules Modular front plate, 4 modules Modular front plate, 5 modules Modular front plate, 3 modules, W=250mm Modular front plate, 4 modules, W=250mm Blanking strip, L=1000mm 4 divisible blanking plates, W=90mm Front plate for horizontal fixed NS250 with toggle Front plate for horizontal INS250 Front plate for horizontal fixed NS250 with rotary handle Front plate for horizontal plug-in NS250 with toggle Front plate for horizontal fixed NS250 with motor mechanism Front plate for INS250 source changeover system with rotary handles Front plate for horizontal fixed NS250 with toggle + ammeter Front plate for horizontal fixed Vigi NS250 with rotary handle Front plate for horizontal fixed Vigi NS250 with toggle Front plate for 3-4 vertical Vigi NS250 devices with toggles Front plate for 3-4 vertical NS250 devices Front plate for 3-4 vertical Vigi NS250 devices with rotary handles or motor mechanisms Front plate for vertical NS250 source changeover system with rotary handles Front plate for INS250 complete source changeover assembly Front plate for vertical INS250 Blanking plate for vertical NS-INS250 Front plate for vertical fixed NS250 with toggle, W=250mm Front plate for vertical fixed INS250 with toggle, W=250mm Front plate for vertical fixed Vigi NS250 with toggle, W=250mm Front plate for vertical fixed NS250 with rotary handle, W=250mm Front plate for horizontal fixed NS630 with toggle Front plate for horizontal INS630 Front plate for vertical NS630 with toggle Front plate for vertical INS630 Front plate for vertical NS630 with rotary handle or motor mechanism Front plate for vertical Vigi NS630 with toggle Front plate for vertical Vigi NS630 with rotary handle or motor mechanism Front plate for vertical fixed NS630 with toggle, W=250mm Front plate for vertical fixed INS630 with toggle, W=250mm Front plate for fixed Vigi NS630 with toggle, W=250mm Front plate for vertical NS630 with rotary handle or motor mechanism, W=250mm Front plate for vertical INF32/40, 3P Front plate for INF32/40, 4P and horizontal 3P Front plate for INF63-160, 3P and vertical INV63, 3P Front plate for vertical INF63, 4P and vertical INF160 Transparent front plate, 4 modules Transparent front plate, 6 modules Transparent front plate, 9 modules

Pages 55, 67, 117, 119 55, 67, 117, 119 55, 67 55, 67 53 45, 48, 52, 53 45 13, 45, 48 62, 64 62 15, 47, 128 15, 47, 128 34 38 36 34 36 41 34 36 34 35 35, 37 37 40 41 39 128 58 60 58 58 32 38 33 39 33 33 33 58 60 58 58 43 42, 43 42, 43 43 13, 48, 56 49, 56 56

2

Index

Cat. no 03345 03352 03353 03354 03358 03801

Designation Transparent front plate, 12 modules Transparent front plate, 4 modules,W=250mm Transparent front plate, 6 modules,W=250mm Transparent front plate, 9 modules,W=250mm 4 lead-sealable front plate screws Plain front plate, 1 module

03802

03803 03804 03805 03806 03807 03808 03811 03812 03813 03814 03815 03816 03817 03890 03891 03895 03900 03901 03902 03903 03904 03907 03908 03910 03911 03912 03914 03928 03934

Pages 56 56, 64, 68 56, 68 56, 68 128 13, 33, 34, 35, 37, 38, 39, 48, 49, 56 33, 34, 35, 36, Plain front plate, 2 modules 37, 39, 40, 41, 42, 43, 56 Plain front plate, 3 modules 13, 32, 33, 38, 40, 48, 56, 117 Plain front plate, 4 modules 33, 49, 56 Plain front plate, 5 modules 49, 56, 117 39, 49, 56, 117 Plain front plate, 6 modules Plain front plate, 9 modules 56 56 Plain front plate, 12 modules Plain front plate, 1 module, W=250mm 58, 62, 64, 68 Plain front plate, 2 modules, W=250mm 58, 60, 68 Plain front plate, 3 modules, W=250mm 64, 68 65, 68 Plain front plate, 4 modules, W=250mm Plain front plate, 5 modules, W=250mm 68 68 Plain front plate, 6 modules, W=250mm Plain front plate, 9 modules, W=250mm 68 Front plate for fan or grill 130 IP30 ventilated front plate, 1 module 131 131 IP30 ventilated front plate, 3 modules Plain mounting plate for 72x72mm meter 50 50 Plain mounting plate for 96x96mm meter Mounting plate with cut-out for 72x72mm meter 50 Mounting plate with cut-out for 96x96mm meter 50 Front plate with cut-outs for meter mounting plates 50 51 Blanking plate, 72x72mm Blanking plate, 96x96mm, for meters 51 51 Front plate with cut-outs for 72x72mm meters Front plate with cut-outs for 96x96mm meters 51, 52 51 Front plate with cut-outs for 144x144mm + 4 72x72mm meters Front plate with holes for 22mm dia. pushbuttons 51 and lamps Visor for human/switchboard interface (HSI) 50 Front plate for Vigilohm TR22A+6 72x72mm 52 meters

Cat. no 04054 04055 04060 04061

Designation Multi-stage distribution block, 4P, 400A Multi-stage distribution block, 4P, 630A Power supply block for horizontal NS250 Universal power supply block, 250A

04062 04064 04065 04066 04067 04070 04071 04073 04074 04075 04076 04103 04104 04107 04108 04111 04112 04113 04114 04116 04117 04118 04119 04121 04122 04123 04124 04126 04127 04128 04129 04145 04146 04146 04150 04151 04152 04155 04156 04158 04161 04162 04163 04171 04172 04173 04174 04190 04191 04192 04194 04195 04197 04198

Connection between vertical NS-INS250 and universal power supply block Connection between vertical NS-INS250 in duct and universal power supply block Connection between vertical NS-INS250 in duct and busbars Incoming connection block for NS-INS250 supplied via the top Incoming connection block for NS-INS250 supplied via the bottom Power supply block for horizontal NS400 Power supply block for horizontal NS630 Connection between vertical NS-INS400-630 in duct and universal power supply block Universal power supply block, 400-630A Connection between vertical NS-INS630 in duct and busbars In-duct incoming connection block for NS630 Powerclip busbars, 125A, 3P, L=450mm Powerclip busbars, 125A, 4P, L=450mm Powerclip busbars, 125A, 3P, L=750mm Powerclip busbars, 125A, 4P, L=750mm Powerclip busbars, 160A, 3P, L=1000mm Powerclip busbars, 250A, 3P, L=1000mm Powerclip busbars, 400A, 3P, L=1000mm Powerclip busbars, 630A, 3P, L=1000mm Powerclip busbars, 160A, 3P, L=1400mm Powerclip busbars, 250A, 3P, L=1400mm Powerclip busbars, 400A, 3P, L=1400mm Powerclip busbars, 630A, 3P, L=1400mm Powerclip busbars, 160A, 4P, L=1000mm Powerclip busbars, 250A, 4P, L=1000mm Powerclip busbars, 400A, 4P, L=1000mm Powerclip busbars, 630A, 4P, L=1000mm Powerclip busbars, 160A, 4P, L=1400mm Powerclip busbars, 250A, 4P, L=1400mm Powerclip busbars, 400A, 4P, L=1400mm Powerclip busbars, 630A, 4P, L=1400mm 4 connections, 125A 4 connections 160 A 4 connections, 160A 8 IPxxB covers for Powerclip busbars 12 Powerclip tap-off blocks with 6mm + 10mm terminals 12 Powerclip tap-off blocks with 16mm terminals Additional 35mm block, 3P Additional 35mm block, 4P 20 screws for Powerclip busbars 4 bars with threaded holes, 160A, L=1000mm 4 bars with threaded holes, 250A, L=1000mm 4 bars with threaded holes, 400A, L=1000mm 4 bars with threaded holes, 160A, L=1400mm 4 bars with threaded holes, 250A, L=1400mm 4 bars with threaded holes, 400A, L=1400mm 4 bars with threaded holes, 630A, L=1400mm 4 copper angle brackets, 250A Rear busbar support Multi-stage bar support for duct 20 M6x20mm bolts for 5mm bars 40 M6x16mm screws for bars with threaded holes, less than 630A Busbar power supply barrier, 630A Rear busbar barrier

Pages 112 112 34, 38, 99 35, 36, 37, 39, 59, 61, 99 35, 37, 39, 99 59, 61, 99 59, 61 34, 38 34, 38 32, 38, 99 32, 38, 99 59, 61, 99 33, 39, 59, 61, 99 59, 61 32 12, 98 12, 98 12, 98 12, 98 12, 99 99 99 99 12, 99 99 99 99 12, 99 99 99 99 12, 99 99 99 99 12, 98, 101 101 12, 99 12, 99 12, 99 12, 99 99, 111 99, 111 12, 99 101, 103 101, 103 101, 103 101, 103 101, 103 101, 103 103 101 101 103 101, 103 101, 103 103 101

0400004004 04008 04012 04013 04014 04018 04021 04024 04029 04031 04033 Multiclip distribution block, 4P, 80A, 1 row Multiclip distribution block, 4P, 63A, 1/2 row Multiclip distribution block, 2P, 200A, 1 row Multiclip distribution block, 3P, 200A, 1 row Multiclip distribution block, 4P, 200A, 1 row Multiclip distribution block, 4P, 160A, 1/2 row Powerclip busbar connection for 200A Multiclip distribution block Duct busbar connection for 200A Multiclip distribution block Rear busbar connection for 200A Multiclip distribution block Polybloc distribution block, 1P, 160A Polybloc distribution block, 3P, 250A 14, 47, 114 14, 47, 114 47, 115 47, 115 47, 115 47, 115 47, 99, 115 103, 115 101, 115 12, 111 34, 35, 36, 37, 38, 39, 43, 59, 61, 110 34, 35, 36, 37, 38, 39, 43, 59, 61, 110 39 12, 47, 108 12, 47, 108 109 112 112

04034

Polybloc distribution block, 4P, 250A

04037 04045 04046 04047 04052 04053

4 Cu spacers for Polybloc 250A distribution block Distribloc 125 Distribloc 160+connections 4 NG-INS125 connections for Distribloc Multi-stage distribution block, 4P, 160A Multi-stage distribution block, 4P, 250A

3

Index

Cat. no Designation 04200 04201 04202 04205 04206 04207 04208 04210 04214 04215 04220 04223 04224 04226 04228 04233 04234 04235 04239 04243 04255 04257 04263 04264 04265 04267 04330 04331 04332 04390 04742 04743 04746 04751 04752 04753 Earth bar, 24 modules Earth bar for direct earth blocks, 12x3mm 2 earth bars, 12 modules 2 supports for earth bar on DIN rail Fixing brackets for vertical earth bar in wall-mount or floor-standing enclosure, H=15mm Fixing brackets for vertical earth bar in wall-mount or floor-standing enclosure, H=45mm Fixing brackets for vertical earth bar in wall-mount or floor-standing enclosure, H=80mm Kit for neutral bar 4 earth blocks with 12x4mm spring terminals 4 earth blocks with 3x16mm spring terminals Mounting plate for terminal block and earth bar in duct Mounting plate with 4 vertical DIN rails for terminal blocks 5 Practic raisers Modular device rail, L=1600mm Terminal block for auxiliaries Trunking for door, L=2000mm 10 grommets for wiring through front Flexible trunking for wiring to door 12 horizontal cable straps 4 covers for horizontal cable straps 12 horizontal trunking supports 4 horizontal trunking sections, L=450mm, + supports 2 covers for vertical cable straps, L=1000mm 12 vertical cable straps, System G 12 vertical trunking supports Vertical trunking, L=2000mm Vertical partition Horizontal partition for wall-mount or floor-standing enclosure Horizontal partition for duct Rf 04390 dans fichier 100F22200.rtf pas trouv dans indexe Insulated flexible bar 20x2mm, L=1800mm Insulated flexible bar 20x3mm, L=1800mm Insulated flexible bar 24x5mm, L=1800mm Insulated flexible bar 32x5mm, L=1800mm Insulated flexible bar 32x6mm, L=1800mm Insulated flexible bar 32x8mm, L=1800mm

Pages 14, 118 14, 118 118 119 14, 117, 119, 120 117, 119, 120 117, 119, 120 121 14, 118 14, 118 116, 120 117, 120 55, 67 54, 66, 116 53, 127 53, 127 53, 127 53, 127 14, 47, 126 14, 47, 126 14, 47, 126 14, 47, 127 47, 126 47, 126 47, 126 47, 127 95 94 94 123 104 104 104 104 104 104

Cat. no 08102 08103 08104 08105 08106 08107 08108 08109 08122 08123 08124 08125 08126 08127 08128 08132 08133 08134 08135 08136 08137 08138 08172 08173 08174 08175 08176 08177 08178 08179 08182 08183 08184 08185 08186 08187 08188 08197 08198 08202 08203 08204 08212 08213 08214 08222 08223 08224

0800008002 08003 08004 08005 08006 08082 08083 08084 08085 08086 08092 08093 08094 08095 08096 Surface-mount Pack enclosure, W=550mm, 2 rows Surface-mount Pack enclosure, W=550mm, 3 rows Surface-mount Pack enclosure, W=550mm, 4 rows Surface-mount Pack enclosure, W=550mm, 5 rows Surface-mount Pack enclosure, W=550mm, 6 rows Plain door for Pack enclosure, W=550mm, 2 rows Plain door for Pack enclosure, W=550mm, 3 rows Plain door for Pack enclosure, W=550mm, 4 rows Plain door for Pack enclosure, W=550mm, 5 rows Plain door for Pack enclosure, W=550mm, 6 rows Transparent door for Pack enclosure, W=550mm, 2 rows Transparent door for Pack enclosure, W=550mm, 3 rows Transparent door for Pack enclosure, W=550mm, 4 rows Transparent door for Pack enclosure, W=550mm, 5 rows Transparent door for Pack enclosure, W=550mm, 6 rows 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

Designation Wall-mount enclosure, W=600mm, 6 modules Wall-mount enclosure, W=600mm, 9 modules Wall-mount enclosure, W=600mm, 12 modules Wall-mount enclosure, W=600mm, 15 modules Wall-mount enclosure, W=600mm, 18 modules Wall-mount enclosure, W=600mm, 21 modules Wall-mount enclosure, W=600mm, 24 modules Wall-mount enclosure, W=600mm, 27 modules Plain door for wall-mount enclosure, 6 modules Plain door for wall-mount enclosure, 9 modules Plain door for wall-mount enclosure, 12 modules Plain door for wall-mount enclosure, 15 modules Plain door for wall-mount enclosure, 18 modules Plain door for wall-mount enclosure, 21 modules Plain door for wall-mount enclosure, 24 modules Transparent door for wall-mount enclosure, 6 modules Transparent door for wall-mount enclosure, 9 modules Transparent door for wall-mount enclosure, 12 modules Transparent door for wall-mount enclosure, 15 modules Transparent door for wall-mount enclosure, 18 modules Transparent door for wall-mount enclosure, 21 modules Transparent door for wall-mount enclosure, 24 modules Duct for wall-mount enclosure, W=300mm, 6 modules Duct for wall-mount enclosure, W=300mm, 9 modules Duct for wall-mount enclosure, W=300mm, 12 modules Duct for wall-mount enclosure, W=300mm, 15 modules Duct for wall-mount enclosure, W=300mm, 18 modules Duct for wall-mount enclosure, W=300mm, 21 modules Duct for wall-mount enclosure, W=300mm, 24 modules Duct for wall-mount enclosure, W=300mm, 27 modules Door for wall-mount enclosure duct, 6 modules Door for wall-mount enclosure duct, 9 modules Door for wall-mount enclosure duct, 12 modules Door for wall-mount enclosure duct, 15 modules Door for wall-mount enclosure duct, 18 modules Door for wall-mount enclosure duct, 21 modules Door for wall-mount enclosure duct, 24 modules Transparent door for wall-mount enclosure duct, 21 modules Transparent door for wall-mount enclosure duct, 24 modules Floor-standing enclosure, W=600mm, 27 modules Floor-standing enclosure, W=600mm, 30 modules Floor-standing enclosure, W=600mm, 33 modules Floor-standing enclosure extension, W=600mm, 27 modules Floor-standing enclosure extension, W=600mm, 30 modules Floor-standing enclosure extension, W=600mm, 33 modules Plain door for wall-mount and floor-standing enclosure, 27 modules Plain door for floor-standing enclosure, 30 modules Plain door for floor-standing enclosure, 33 modules

Pages 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 74 76 76 76 76 76 76 74, 76 76 76

4

Index

Cat. no Designation 08232 Transparent door for wall-mount and floor-standing enclosure, 27 modules 08233 Transparent door for floor-standing enclosure, 30 modules 08234 Transparent door for floor-standing enclosure, 33 modules 08272 Duct for floor-standing enclosure, W=300mm, 27 modules 08273 Duct for floor-standing enclosure, W=300mm, 30 modules 08274 Duct for floor-standing enclosure, W=300mm, 33 modules 08282 Door for wall-mount and floor-standing enclosure duct, 27 modules 08283 Door for floor-standing enclosure duct, 30 modules 08284 Door for floor-standing enclosure duct, 33 modules 08292 Transparent door for wall-mount and floor-standing enclosure duct, 27 modules 08293 Transparent door for floor-standing enclosure duct, 30 modules 08294 Transparent door for floor-standing enclosure duct, 33 modules 08302 IP55 enclosure, 7 modules 08303 IP55 enclosure, 11 modules 08304 IP55 enclosure, 15 modules 08305 IP55 enclosure, 19 modules 08306 IP55 enclosure, 23 modules 08307 IP55 enclosure, 27 modules 08309 IP55 enclosure, 33 modules 08312 IP55 enclosure extension, 7 modules 08313 IP55 enclosure extension, 11 modules 08314 IP55 enclosure extension, 15 modules 08315 IP55 enclosure extension, 19 modules 08316 IP55 enclosure extension, 23 modules 08317 IP55 enclosure extension, 27 modules 08319 IP55 enclosure extension, 33 modules 08322 IP55 plain door, 7 modules 08323 IP55 plain door, 11 modules 08324 IP55 plain door, 15 modules 08325 IP55 plain door, 19 modules 08326 IP55 plain door, 23 modules 08327 IP55 plain door, 27 modules 08329 IP55 plain door, 33 modules 08332 IP55 transparent door, 7 modules 08333 IP55 transparent door, 11 modules 08334 IP55 transparent door, 15 modules 08335 IP55 transparent door, 19 modules 08336 IP55 transparent door, 23 modules 08337 IP55 transparent door, 27 modules 08339 IP55 transparent door, 33 modules 08342 IP55 duct, W=300mm, 7 modules 08343 IP55 duct, W=300mm, 11 modules 08344 IP55 duct, W=300mm, 15 modules 08345 IP55 duct, W=300mm, 19 modules 08346 IP55 duct, W=300mm, 23 modules 08347 IP55 duct, W=300mm, 27 modules 08349 IP55 duct, W=300mm, 33 modules 08352 IP55 side panels, 7 modules 08353 IP55 side panels, 11 modules 08354 IP55 side panels, 15 modules 08355 IP55 side panels, 19 modules 08356 IP55 side panels, 23 modules 08357 IP55 side panels, 27 modules 08359 IP55 side panels, 33 modules 08362 IP55 side panels with cut-outs, 7 modules 08363 IP55 side panels with cut-outs, 11 modules 08364 IP55 side panels with cut-outs, 15 modules 08365 IP55 side panels with cut-outs, 19 modules 08366 IP55 side panels with cut-outs, 23 modules

Pages 74, 76 76 76 76 76 76 74, 76 76 76 74, 76 76 76 86 86, 87 86, 87 86 86 86 86 86 86, 87 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86, 87 86 86 86 86 86 86, 87 86 86 86 86 86 88 88 88 88 88

Cat. no 08367 08369 08371 08372 08374 08375 08376 08377 08378 08379 08381 08382 08383 08386 08387 08391 08392 08393 08394 08395 08396 08801 08803 08805 08807 08810 08811 08812 08813 08816 08817 08818 08819 08820 08821 08822 08824 08830 08831 08832 08833 08840 08841 08850 08851

08861 08862 08863 08864

Designation IP55 side panels with cut-outs, 27 modules IP55 side panels with cut-outs, 33 modules Top and bottom plates, W=600mm Top and bottom plates, W=300mm IP55 4-module partial plain door for 11-27 module enclosures IP55 6-module partial plain door for 33-module enclosures IP55 4-module partial door with cut-outs for 11-27 module enclosures IP55 6-module partial door with cut-outs for 33-module enclosures IP55 4-module partial TEGO door for 11-27 module enclosures IP55 6-module partial TEGO door for 33-module enclosures IP55 horizontal/vertical combination kit IP55 L combination kit IP55 square combination kit Canopy for IP55 enclosures, W=600mm Canopy for IP55 duct, W=300mm IP55 mounting upright IP55 plinth gusset IP55 plinth cover panels, W=600mm IP55 plinth cover panels, W=300mm Pole-mount kit for enclosures 2 IP55 lifting rings 2 lifting rings 4 external wall-mount brackets 100mm plinth raiser for floor-standing enclosures 100mm plinth raiser for ducts 2 lifting/reinforcement cross-members for single wall-mount or floor-standing enclosures 2 lifting/reinforcement cross-members for 2 wall-mount or floor-standing enclosures 2 lifting/reinforcement cross-members for single wall-mount or floor-standing enclosure and duct 2 lifting/reinforcement cross-members for two wall-mount or floor-standing enclosures and a duct Combination kit 2 combination uprights Multiple combination kit Flush-mount kit for wall-mount enclosures, 6-18 modules Flush-mount kit for wall-mount enclosures, 21-27 modules Trunking spreader for Pack enclosure Pack flush-mount kit Trunking spreader for wall-mount or floor-standing enclosure IP31 canopy for wall-mount or floor-standing enclosure IP31 canopy for 2 wall-mount or 2 floor-standing enclosures IP31 canopy for single wall-mount or floor-standing enclosure and duct IP31 canopy for 2 wall-mount or 2 floor-standing enclosures and duct IP43 door gasket kit, 6-21 modules IP43 door gasket kit, 24-33 modules 6-module partial door for wall-mount or floor-standing enclosure 6-module partial door with cut-out for human/ switchboard interface (HSI) for wall-mount or floor-standing enclosure Plain mounting plate, 210x150mm Mounting plate with eight 22mm diameter holes Mounting plate with two 70x85mm holes for industrial sockets IP55 mounting plate with 70x85mm and 90x100mm holes for industrial sockets

Pages 88 88 86, 87 86, 87 88 88 88 88 88 88 87 87 87 91 91 87, 90 90 90 90 91 91 80 15, 81 77 77 80 75, 77, 80 75, 77, 80 75, 77, 80 75 75 75 78 78 11 11 80 78 78 78 78 78 78 78 78

89 89 89 89

5

Index

Cat. no Designation 08865 Mounting plate with 90x180mm hole for industrial sockets 08866 Cable tie support adapter 08867 34 08867 2 cable tie supports for wall-mount or floor-standing enclosure 08868 4 cable tie supports for ducts 08870 Plain metal gland plate for wall-mount or floor-standing enclosure 08871 Interface for FL21 gland plate for wall-mount or floor-standing enclosure 08874 Plain metal gland plate for duct 08875 Interface for FL21 gland plate for duct 08878 Plastic gland plate and interface for Pack enclosures 08879 Plain metal gland plate for Pack enclosures 08880 Plastic gland plate and interface for wall-mount or floor-standing enclosure 08881 Plain FL21 gland plate 08884 Plastic gland plate and interface for ducts 08887 Gland plate for floor-standing enclosure plinth 08888 Gland plate for duct plinth 08891 Not yet available 08892 Not yet available 08895 FL21 gland plate with 20x16mm diameter entries 08896 FL21 gland plate with 16/30/47mm diameter entries 08897 FL21 gland plate with 2x66mm diameter entries 08898 FL21 gland plate with 39x7-26mm diameter entries 08899 FL21 IP55 gland plate with 2x33-72mm diameter entries 08900 Switchboard identification plate 08903 12 adhesive label holders, H=24mm, W=432mm 08904 12 adhesive label holders, H=36mm, W=432mm 08905 12 adhesive label holders, H=24mm, W=180mm 08906 12 adhesive label holders, H=36mm, W=180mm 08907 12 adhesive label holders, H=24mm, W=650mm 08908 12 adhesive label holders, H=36mm, W=650mm 08910 Earthing braid, 6mm 08911 Earthing wire, 6mm 08913 12 clip-on labels, 18x35mm 08914 12 engraving plates, 18x35mm 08915 12 clip-on labels, 18x72mm 08916 12 engraving plates, 18x72mm 08917 12 clip-on labels, 25x85mm 08918 12 engraving plates, 25x85mm 08930 Standard handle without insert 08932 EURO handle without insert 08933 ASSA handle without insert 08934 IP55 EURO handle for cylinder 08935 IP55 handle, L=155mm 08936 IP55 door latch with lock and 2 no. 405 keys 08938 Handle padlocking kit 08939 IP55 handle padlocking kit 08940 Barrel lock no. 405 08941 Barrel lock no. 455 08942 Barrel lock no. 1242E 08943 Barrel lock no. 3113A 08944 Barrel lock no. 2433A 08945 DIN double bar insert 08946 Screwdriver slot insert 08947 6.5mm male triangle insert 08948 7mm male triangle insert 08949 8mm male triangle insert 08950 9mm male triangle insert 08951 6mm male square insert 08952 7mm male square insert 08953 8mm male square insert 08955 6mm female square insert

Pages 89 124 15, 34, 124 124 79 79 79 79 11 11 79 79 79 79 79 79 79 79 79 79 91 91 128 15, 129 15, 129 129 129 15, 129 15, 129 15, 129 15, 129 15, 128 15, 128 15, 128 15, 128 15, 128 15, 128 82 82 82 92 92 92 82 93 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82

Cat. no 08961 08962 08963 08964 08987 08988 08989 08990 08992 08993 08994 08998

Designation Touch-up paint brush Touch-up spray paint Adhesive drawing holder Switchboard lighting Fan Grill with filter 5 standard filters 5 fine filters Resistor, 55W Resistor, 90W Resistor, 250W Thermostat

Pages 15, 129 15, 129 15, 129 56 130 130 130 130 131 131 131 131

0900009931 09932 09933 09937 09938 09939 09942 09943 09945 09946 09947 09948 09949 09981 09982 09983 09984 09985 09986 09987 09988 09989 IP55 screwdriver slot insert IP55 3mm double bar insert for handle IP55 barrel + 2 no. 2433A keys IP55 7mm male triangle insert for handle IP55 8mm male triangle insert for handle (CNOMO) IP55 9mm male triangle insert for handle (EDF) IP55 barrel + 2 no. 1242E keys IP55 barrel + 2 no. 3133A keys IP55 barrel + 2 no. 455 keys IP55 6mm female square insert for handle IP55 7mm male square insert for handle IP55 8mm male square insert for handle IP55 6mm male square insert for handle IP55 screwdriver slot insert for door IP55 3mm double bar insert for door IP55 7mm male triangle insert for door IP55 8mm male triangle insert for door (CNOMO) IP55 9mm male triangle insert for door (EDF) IP55 6mm male square insert for door IP55 7mm male square insert for door IP55 8mm male square insert for door IP55 6mm female square insert for door 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92

1300013735 13736 10 self-adhesive label sheets for common symbols 15, 129 10 self-adhesive label sheets for special symbols 15, 129

6

7

General presentationSystem G

Prisma Plus electrical switchboards up to 630 APrisma Plus - a tried and tested modular systemA dependable electrical installation The total compatibility of Schneider devices with the Prisma Plus system is a key advantage in ensuring a high level of installation dependability. System design has been validated by type tests as per standard IEC 60439-1 and benefits from the combined experience of Schneider customers over many years. An upgradeable electrical installation Thanks to modular design, Prisma Plus switchboards can be modified easily to integrate new functions as needed. Maintenance operations, carried out with the switchboard de-energised, are fast and straight-forward due to easy access to devices. Total safety for personnel Work in a Prisma Plus switchboard is risk-free when carried out by qualified persons in compliance with all applicable safety regulations. Devices are installed behind protective front plates and only the operating handles are accessible. Additional internal separations protect against direct contact with live parts. Terminal shields are mandatory for installation of Compact NS and Interpact INS/INV devices in Prisma Plus enclosures.

Presentation

8


Prisma Plus electrical switchboards up to 630 APack wall-mount enclosures

Presentation

System GPD390665

b Applications: v indoor enclosures containing all modular devices, for distribution switchboards in small and medium-sized commercial buildings (hotels, offices, shops), or for medium-sized and large residential installations (houses) v supplied mounted, with modular rails and front plates (48 modules (9 mm) per row) b rated operational current: 160 A b degree of protection: IP43 (optional) & IP30 with or without door b degree of protection against mechanical impacts: v IK07 (without door) v IK08 (with door) b enclosure thickness: 1.5mm thick EGI sheet steel b enclosure dimensions: v five heights: 480 mm to 1080 mm v width: 555 mm b depth: 157 mm without door v 186 mm with door and handle.

PD390670

IP30/31/43 wall-mount and floor-standing enclosuresb Applications: v indoor wall-mount and floor-standing enclosures for all types of low-voltage switchboards (main, subdistribution and final) in commercial and industrial environments v supplied in kit form, can be combined side-by-side and one on top of another b rated operational current: 630 A b degree of protection: v IP30: with or without door v IP31: with door + canopy (optional) v IP43: with door + canopy (optional) + gasket b degree of protection against mechanical impacts: v IK07 (without door) v IK08 (with door) b enclosure thickness: 1.5mm thick EGI sheet steel b enclosure dimensions: v eleven heights: 330 mm to 1830 mm (including the plinth for floor-standing enclosures) v two widths: 595 mm and 305 mm (duct) v depth: 205 mm without door v 250 mm with door + handle

IP30/31/43 wall-mount and floorstanding enclosures.

IP55 enclosuresb Applications: v indoor enclosures for distribution, protection and process control in commercial and industrial applications v supplied in kit form, can be combined side-by-side and one on top of another b rated operational current: 630 A b degree of protection: IP55 b degree of protection against mechanical impacts: IK10 b enclosure thickness: 1.5mm thick EGI sheet steel b enclosure dimensions: v seven heights: 450 mm to 1750 mm v width: basic enclosure: 600 mm v extensions: 575 and 325 mm (duct) v depth: 260 mm + 30 mm (handle).

IP55 enclosures.

9

EnclosuresSystem G

Pack wall-mount enclosures up to 160 A

Catalogue numbersPD390550 PD390551

PresentationPack electrical-distribution enclosures are specially designed for modular devices up to 160 A. The design, based on the System G wall-mount and floor-standing enclosures, offers a number of advantages: b easy device access and mounting b distribution using 125 and 160 A Powerclip insulated busbars as well as Distribloc and Polybloc distribution blocks b supply of devices using 63/80 A Multiclip distribution blocks or comb busbars b horizontal cable straps and trunking b earth and neutral bars b identification labels b closing accessories including barrel locks and inserts. The optimised depth and extra-thin door ensure perfect integration in all environments. In addition, Pack enclosures are specially equipped for easy on-site installation. Supplied with modular rails and front plates already mounted, they can also be fitted with blanking plates and plastic gland plates. They can be equipped with plain or transparent doors. Characteristics b rated operational current: 160 A b degree of protection: IP43 (optional) & IP30 (with or without door) b degree of protection against mechanical impacts: IK07 (without door), IK08 (with door) b enclosure thickness: 1.5mm thick EGI sheet steel b insulation: class 1 b compliance with standards: IEC 60439-1 b dimensions: v H: see the table on the next page v W: 555 mm v D: 157 mm without door 186 mm without door b Capacity per row: 48 width modules (9 mm each).PD390536

10

EnclosuresSystem G

Pack wall-mount enclosures

Catalogue numbersDD381800 DD381801 DD381802

EnclosuresDD381811

No. of rows2 3 4 5 6

Height of Enclosure enclosure480 630 780 930 1080 08002 08003 08004 08005 08006

Plain door08082 08083 08084 08085 08086

Transparent door08092 08093 08094 08095 08096

Reversible doors (opening to left or right), equipped with a handle (without barrel lock). For barrel locks and inserts, see page 82.

Trunking spreaderDD381814

DesignationTrunking spreader

Cat. no.08821

Flush-mount kitDD381256

DesignationFlush-mount kit

Cat. no.08822

Gasket (IP43)DD381268

When the switchboard is equipped with a gasket for the doors ensures compliance with the degree of protection IP43. For combinations, order one gasket per door. DesignationGasket for one wall-mount encl./one floor-standing encl./one duct 6 to 21 modules (L = 3300 mm)

Cat. no.08840

11

EnclosuresSystem G

Pack wall-mount enclosures Distribution Cable runningAvailable in two lengths (450 and 750 mm) in three and four-pole versions. The busbars can be cut to length every 150 mm. They are supplied with clip-on covers that block off the connected cable lugs and can be cut as needed. Cat. no. selection 125 A Powerclip busbarsThree-pole Four-pole L = 450 mm L = 750 mm L = 450 mm L = 750 mm L = 1000 mm L = 1000 mm

Catalogue numbers

160 A Powerclip busbarssee page 99.DD381815

Cat. no.04103 04107 04104 04108

160 A Powerclip busbarsThree-pole Four-pole

Cat. no.04111 04121 04145

Busbar connectionFour 125 A connections, L = 230 mm (for NG125, NSA and INS equipped with tunnel terminals) A 35 mm ferrule for connection to tunnel terminals is crimped to one end. A 45 ring lug is crimped to the other end. 95 mm tunnel terminals for INS : cat. no. 28947 (set of 3) cat. no. 28948 (set of 4)

Four 160 A connections, L = 250 mm (for NSA160) A 45 mm ferrule for connection to tunnel terminals is crimped to one end. A 45 ring lug is crimped to the other end.

DD381379

04146

DD381816

Powerclip tap-off blocksEach block can be used to connect: b one 6 mm and one 10 mm cable (04151) b one 16 mm cables (04152). Equipped with spring terminals. Designation12 Powerclip tap-off blocks with 6 mm + 10 mm terminals 12 Powerclip tap-off blocks with 16 mm terminals

Cat. no.04151 04152

Connection cover Clip-on covers that block off the connected cable lugs and can be cut as needed. They maintain the IPxxB value for cables from 10 to 25 mm with 90 angle lugs.DD381817

Designation8 IPxxB covers for Powerclip busbars

Cat. no.04150

8.8 class mounting hardwareUsed for electrical connections to the copper bars. DesignationSet of 20 CHC M6 x 12 mm screws for Powerclip busbars

Cat. no.04158

160 A Polybloc distribution blocksee page 110.DD381200

Designation160 A Polybloc distribution block, 1P

Cat. no.04031

Insulation voltage Ui: 750 V AC Nominal current: 160 (40 C) Upstream connection: tunnel terminals up to 70 mm2 Downstream connections: spring loaded terminals up to 6 x 16v flexible or rigid.

rtio

125/160 A Distribloc distribution blocksee page 108.DD381818

Designation125 A Distribloc distribution block 160 A Distribloc distribution block

Cat. no.04045 04046

12

EnclosuresSystem G

Catalogue numbers

Pack wall-mount enclosures Device on a modular rail Device on a slotted plate NSA125/160, NG125 circuit breakerDepth behind front plate (mm) Useful length (mm)

Installation on a modular railDD381806

DesignationRear modular rail 79 432

Cat. no.03004

Installation on a slotted mounting plateDD381807

No. of vertical modules

Useful height Useful width (mm) (mm)

Depth behind front plate

DesignationRecessed slotted mounting plate 6 300 420 112

Cat. no.03172

NG125 circuit breakerDD382565


Modular rail

Modular ront plate

Plain front plate

DesignationNG125 Vigi NG125 6 b 03205 03801

Direct supply via cables. Capacity of modular rail: 48 Multi 9 modules.Width of devices: NG125 3P: 9 modules NG1250 4P: 12 modules 63 A instantaneous or selective 3P: 18 modules 63 A instantaneous or selective 4P: 21 modules 63 A adjustable I/S/R 3P: 20 modules 63 A adjustable I/S/R 4P: 23 modules

NSA125/160 circuit breakerDD382564


Modular rail

Modular front Plain front plate plate

DesignationNSA125/160 circuit breaker Vigi circuit breaker NSA125/160 6 03008 03205 03801

Capacity of modular rail: 48 Multi 9 modules.Note: To mix an NSA125/160 circuit breaker with Multi 9 modular devices, order (with the device) the symmetrical rail + raiser set (28041). Width of devices: NSA125/160 3P: 10 modules NSA125/160 4P: 14 modules Vigi NSA125/160 3P: 24 modules Vigi NSA125/160 4P: 27 modules

Front plateDD382661

Heigh in mm

Plain front plate

Transparent front plate

Designation1 module (H = 50 mm) 50 3 modules (H = 50 mm) 150 4 modules (H = 200 mm) 200 03801 03803 03342 Modular front Plain front plate plate b 03205 03801

INS40/160 switchDD380685

Modular rail

DesignationINS40/160 switch b (installed on a Multi 9 row) INS100/160 switch with b long terminal shields (installed in the place of 2 Multi 9 rows)

Capacity of modular rail: 48 Multi 9 modules.Device width: INS40/100 : 10 modules INS100/160 : 15 modules

13

EnclosuresSystem G

Pack wall-mount enclosures Distribution Cable running

Catalogue numbers

Multiclip distribution blocksee page 114.DD382657

Designation80 A Multiclip, 4P 63 A Multiclip, 4P, 1/2 row

Cat. no.04004 04008

Comb busbarssee page 47.DD382658

Cable runningsee page 126.DD382659

DesignationCable straps 12 horizontal cable straps 4 covers for horizontal cable straps, L = 430 mm Trunking 4 horizontal sections, 60 x 30 mm, L = 450 mm + supports 12 horizontal trunking supports 2 fixing brackets, H = 15 mm (for vertical trunking)

Cat. no.04239 04243 04257 04255 04206

Earth barsee page 118.DD382653

Presentation The earth bar can be: b a bare earth bar, 12 x 3 mm with 330 mm of connection space, equipped with a 35 mm tunnel terminal and on which earth blocks with spring terminals can be clipped b an earth bar (200 or 450 mm long), equipped with clamps with captive screws. Earth bar with spring terminals Cat. no.Bare earth bar, 12 x 3 mm with 330 mm of connection space, equipped with a 35 mm tunnel terminal (for earth blocks with spring terminals) 4 earth blocks with 12 x 4 mm spring terminals (L = 75 mm) 4 earth blocks with 3 x 16 mm spring terminals (L = 37 mm) 2 fixing brackets, H = 15 mm (for vertical earth bar) 04215. 04201 04214 04215 04206

04201.

04214.

Earth bar with clampsDD381516

Cat. no.04200

Earth bar with 40 clamps + one 35 mm terminal (L = 450 mm)

04200.

Neutral barsee page 121.DD382660

A neutral bar is created by inserting insulating spacers behind an earth bar. DesignationKit for neutral bar

Cat. no.04210

14

EnclosuresSystem G

Pack wall-mount enclosures Accessories

Catalogue numbers

Blanking platessee page 128.DD382615

DesignationBlanking strip, H = 46 mm, L = 1 m 4 divisible blanking plates, H = 46 mm, L = 90 mm

Cat. no.03220 03221

Identification labelssee page 128.DD382616

DesignationClip-on labels 12 clip-on labels 18 x 35 18 x 72 25 x 85 18 x 35 18 x 72 25 x 85 H = 24 mm H = 36 mm

Cat. no.08913 08915 08917 08914 08916 08918 08903 08904

12 engraving plates Clip-on labels.DD382617

Adhesive labels 12 adhesive label holders, W = 432 mm

Adhesive labels.

Symbol sheets Set of ten adhesive symbol sheets

standard special

13735 13736

Enclosure accessoriessee page 129.DD382618

Designation

Cat. no.

Earthing braid, 6 mm Earthing wire, 6 mm

08910 08911

The braid is equipped with a 4 mm diameter lug at one end and a 6 mm diameter lug on the other. It is used to earth a door or wicket door with devices.DD381338

DD382619

DD382620

DesignationTouch-up spray paint, RAL 9001 Touch-up paint brush, RAL 9001

Cat. no.08962 08961

DD382621

DesignationAdhesive drawing holder

Cat. no.08963

Cable-tie supportsDD382613

Designation2 cable-tie supports

Cat. no.08867

Wall mountingDD382614

Designation4 external wall-mount brackets

Cat. no.08803

15

16

System G contents

General presentationElectrical switchboards up to 630 A Examples of switchboard configurations

1818 20

Cat. no. selectionTypical configuration with catalogue numbers Determining catalogue numbers

2626 30

Functional unitsCompact NS400/630 Compact NS100/250 Interpact INS-INV250/630 Manual source changeover system Fupact INF Modular devices NG125 circuit breakers NSA125/160 circuit breakers INS40/160 switch-disconnectors Industrial control devices Human-switchboard interface Other devices Switchboard lighting Reserve space

3232 34 38 40 42

44 48 50 54 56 56

300 mm wide functional unitsCompact NS100/630 Interpact INS-INV250/630 Modular devices NSA125/160 circuit breakers INS40/160 switch-disconnectors Industrial control devices Other devices Fixing accessories Reserve space

5858 60 62 64 66 67 68

EnclosuresIP30/IP31/IP43 wall-mount enclosures Presentation IP30/IP31/IP43 floor-standing enclosures Presentation IP30/IP31/IP43 wall-mount enclosures IP30/IP31/IP43 floor-standing enclosures IP30/IP31/IP43 enclosures Enclosure accessories IP55 enclosures Presentation IP55 enclosures Enclosure Partitioning

7070 72 74 76 78 82 84 86 94

DistributionMain distribution 630 A Powerclip busbars 400 A rear busbars 630 A multi-stage busbars Insulated flexible bars Overview of distribution blocks Distribloc distribution block Polybloc distribution block 160/630 A multi-stage distribution block Multiclip distribution block Terminal blocks support Earth bars Neutral bars Terminal blocks IP30/31/43/55 enclosures Cable running Front plate accessories Air-conditioning accessories

9696 98 100 102 104 106 108 110 112 114 116 118 121 122 124 126 128 130

17


Electrical switchboards up to 630 A

Presentation

The Prisma Plus functional systemPD39528

The Prisma Plus functional system can be used for all types of low-voltage distribution switchboards up to 630 A, in commercial and industrial environments. Switchboard design is very simple. A functional structure for devices made up of wall-mount and floor-standing enclosures that can be used alone or combined. A distribution system made up of centralised distribution blocks and vertical busbars installed on the side or in the rear of the switchboard. Complete functional units Each device is part of a functional unit comprising: b a dedicated mounting plate for device installation b a front plate to block direct access to live parts b prefabricated busbar connections b systems for on-site connections and running of auxiliary wires. The functional units are modular and are arranged rationally, one on top of another, within the enclosure. The system includes everything required for functional unit mounting, supply and onsite connection. The components of the Prisma Plus system and those of the functional units in particular have been designed and tested taking into account device characteristics. This design approach ensures a high degree of reliability in system operation and optimum safety for personnel.PD390441

Functional units are arranged rationally, one on top of another.

18


Electrical switchboards up to 630 A

Presentation

Prisma Plus enclosuresPD390530

b steel sheet metal b electrophoresis treatment + hot-polymerised polyester epoxy powder, white colour RAL 9001. b enclosure thickness: 1.5mm thick EGI sheet steel b IP30 / 31 / 43 wall-mount enclosures v degree of protection: - IP30: with or without door - IP31: with door + canopy (optional) - IP43: with door + canopy (optional) + IP43 gasket v IK07 (without door), IK08 (with door) v can be dismantled v can be combined side by side and one on top of another v eight heights from 330 to 1380 mm v width: 595 mm v width of duct: 305 mm, can be combined side by side v depth: 250 mm with door (205 mm without door) b IP30 / 31 / 43 floor-standing enclosures v degree of protection: - IP30: with or without door - IP31: with door + canopy (optional) - IP43: with door + canopy (optional) + IP43 gasket v IK07 (without door), IK08 (with door) v can be dismantled v can be combined side by side v three heights: 1530, 1680 and 1830 mm v width: 595 mm v width of duct: 305 mm, can be combined side by side v depth: 250 mm with door (205 mm without door) b IP55 enclosures v IK10 v can be dismantled v can be combined side by side and one on top of another v width: 600 mm v seven heights: 450 to 1750 mm v widths: 325 and 575 mm, can be combined side by side and one on top of another v depth: 260 mm with door + 30 mm (handle).

Advantages of Prisma Plus switchboards

A dependable electrical installation The total compatibility of Schneider devices with the Prisma Plus system is a key advantage in ensuring a high level of installation dependability. System design has been validated by type tests and benefits from the combined experience of Schneider customers over many years. An upgradeable electrical installation Thanks to modular design, Prisma Plus switchboards can be modified easily to integrate new functional units as needed. Maintenance operations, carried out with the switchboard de-energised, are fast and straight-forward due to easy access to devices and the use of standard components. Total safety for personnel Devices are installed behind protective front plates; only the operating handles are accessible. The electrical installation and operating personnel are fully protected. In addition, all distribution components are protected by an IPxxB degree of protection. Terminal shields are mandatory for installation of Compact NS and INS/INV devices in Prisma Plus enclosures. Electrical switchboards built using the Prisma Plus functional system and Schneider recommendations fully comply with international standard IEC 60439-1.

Electrical characteristics

Prisma Plus components comply with standard IEC 60439-1 and have the following electrical characteristics: b rated insulation level of main busbars at rear of enclosure: 1000 V b rated operational current Ie (40C): 630 A b rated peak withstand current Ipk: 53 k b rated short-time withstand current Icw: 25 kA rms / 1 second b frequency: 50/60 Hz.

19


Examples of switchboard configurations

PresentationPD390444 PD390443

IncomerCompact NS250 4P Fixed, front connection Toggle Incoming cables via bottom to incoming connection block

DistributionPolybloc distribution block

Outgoing devicesMulti 9 devices Supply Cable running Connection Motor circuit breakers Supply Cable running Connection 80 A Multiclip Comb busbars Straps + cover Terminal block at top of switchboard Comb busbars Straps + cover Terminal block at top of switchboard

IP30 enclosureWall-mount enclosure, W = 595 mm, H = 930 mm Plain door Partial plain door

20




IncomerInterpact INS160 4P Incoming cables via top

Distribution160 A Powerclip busbars

Outgoing devices80 A Multiclip Comb busbars Cable running Straps + cover Connection Terminal block in duct, W = 300 mm Motor circuit breaker + contactor combinations Supply Cable wiring Cable running Straps + cover Connection Terminal block in duct, W = 300 mm Multi 9 devices Supply

IP30 enclosureWall-mount enclosure, W = 595 mm, H = 1230 mm Transparent door Duct, W = 305 mm, H = 1230 mm Plain door

21




IncomerCompact NS250 Fixed, front connection Toggle Incoming cables via top to incoming connection block

DistributionPowerclip busbars

Outgoing devicesMulti 9 devices Supply Cable running Connection Motor circuit breakers Supply Cable running Connection 80/200 A Multiclip Comb busbars Straps + cover Trunking Terminal block in duct, W = 300 mm Cable wiring Trunking Terminal block in duct, W = 300 mm

IP30 enclosureWall-mount enclosure, Transparent door W = 595 mm, H = 1230 mm Duct, W = 305 mm, Plain door H = 1230 mm

22




IncomerInterpact INS160 Lateral handle Incoming cables via bottom, directly to device

DistributionDistribloc distribution block

Outgoing devicesComb busbars Straps + cover Terminal block at bottom of enclosure Motor control and protection devices Supply Comb busbars Cable running Trunking Connection Terminal block at bottom of enclosure Multi 9 devices Supply Cable running Connection

IP55 enclosureWall-mount enclosure, W = Transparent door 595 mm, H = 1250 mm

23



PresentationPD390449

IncomerCompact NS400 Fixed, front connection Toggle Incoming cables via bottom in duct (W = 300 mm) to incoming connection block

DistributionPowerclip busbars

Outgoing devicesCompact NS250 Fixed, front connection Toggle Supply Multi 9 devices Supply

Powerclip busbars with power supply block Comb busbars 200 A Multiclip

Trunking Vertical terminal block at bottom of floor-standing enclosure Motor control and protection devices Supply 200 A Multiclip Cable running Trunking Connection Vertical terminal block at bottom of floor-standing enclosure

Cable running Connection

IP30 enclosureFloor-standing enclosure, Transparent door W = 595 mm, H = 1830 mm Duct, W = 305 mm, Plain door H = 1830 mm

24




25

Cat. no. selectionSystem G

Typical configuration with catalogue numbers


1 2 3

NS250 functional units Main distribution using Powerclip busbars Modular device functional units

See page 34 See page 99 See page 44

Distribution using 80 A Multiclip distribution blocks See page 114 Horizontal cable running using straps See page 126 See page 44 See page 44 See page 126 See page 44 See page 115 See page 127 See page 48 See page 127 See page 127 See page 116, 122 See page 118

4

Modular device functional units Distribution using comb busbars Horizontal cable running using straps

5

Modular device functional units Distribution using 200 A Multiclip distribution blocks Horizontal cable running using trunking

6

Motor control and protection functional units Horizontal cable running using trunking Vertical cable running using trunking Terminal block Earth bar

7 8 926




1 2 3 4 5

Device compartment Connection compartment Front plate Transparent door Plain door

See page 70 See page 70 See page 70 See page 74 See page 74

27



Catalogue numbersPD390675

1 2 3 4 5 6 7 8 9

Mounting plate for horizontal 03030 See page 34 Compact NS100/250 with toggle Front plate for horizontal 03230 See page 34 Compact NS100/250 with toggle Incoming connection block 04066 See page 34 250 A power supply block Powerclip busbars 250 A, 4P, L=1000 mm Modular rail Modular rail (adjustable) Modular front plate, 3 modules Plain front plate, 4 modules 04060 See page 34 04122 See page 99 03001 See page 45 03002 See page 48 03203 See page 45 03804 See page 56

13 4 covers for horizontal cable

04243 See page 126 04257 See page 127 04265 See page 127 04267 See page 127 04220 See page 116 04226 See page 116 See page 122 04200 See page 118 08108 See page 74 08178 See page 74

straps 14 4 horizontal trunking sections, 60 x 30 mm 15 12 vertical trunking supports

16 Vertical trunking section,

60 x 80 mm Support for terminal block 17 and earth bar Modular rail, L=1600 mm 18

19 Terminal block 20 Earth bar with 40 clamps 21 Wall-mount enclosure,24 modules Duct, 24 modules 22

10 80 A Multiclip distribution block, 04004 See page 1144P 11 200 A Multiclip distribution block, 04014 See page 114 4P 04239 See page 126 12 12 horizontal cable straps

23 Transparent door for wall-mount 08138 See page 74enclosure, 24 modules Plain door for duct, 24 modules 24 08188 See page 74

28

29


Determining catalogue numbers

Presentation

Starting with the electrical diagram: IP30 switchboard

DD381974

Install the incomersee page 34

DD380887

1DD381877

Installation/connection

Device

b order the mounting plates and the front plates b the incoming connection block b the power supply block for the Powerclip busbars.


Connection block cables Mounting Cut-out Upstream cables via bottom plate front plate front plate via top

DD381888

)L[HG&RPSDFW16

DD381975

2DD381878

Distribution using Powerclip busbars

Device

Power supply block Power supply block

Terminal shields (set of 2) Terminal shields (set of 2)

Powerclip busbars Powerclip busbars

)L[HG&RPSDFW16DQG9LJLFRPSDFW16 )L[HG&RPSDFW16DQG9LJLFRPSDFW16

DD381976

Install the modular devicesOrder the mounting plates and front plates taking into account: b supply to the rows b cable running.DD381888

1DD381879

Multi 9 see page 44

Device


Modular rail

Modular front plate

$OO0XOWLGHYLFHVAll supply systems (comb busbars, Multiclip) with cable straps and trunking sections

0XOWLGHYLFHVSupply via 63/80 A Multiclip or comb busbars with cable straps Supply via 63/80 A Multiclip or comb busbars with cable straps

DD381881

DD381977

Device


Modular rail

Modular front plate

$OO0XOWLGHYLFHVAll supply systems (comb busbars, Multiclip) with cable straps and trunking sections

0XOWLGHYLFHVSupply via 63/80 A Multiclip or comb busbars with cable straps

DD381978

2DD381880

TeSys "U" see page 48

Device


Useful length of rail (mm)

Rear modular rail

Transparent front plate

7H6\V8PRGHOTeSys U model

b Multiclip distribution block see page 114 b cable running see page 126

Determine the size of the switchboardb count the number of occupied modules b determine the corresponding wallmount enclosure b order the additional plain front plate.

19 modules 21 modules

see page 68

30

DD381979

Plain front plate

PPZLGHSODLQIURQWSODWH

&DWQR


Determining catalogue numbers

PresentationDD381980

Plan the distribution systemDD381890 DD381882

Powerclip busbars see page 99

3RZHUFOLSEXVEDUVThree-pole Four-pole

Select the terminal blocks and the earth barDD381883 DD381981

see page 116DD381891

'HVLJQDWLRQMounting plate for terminal block and earth bar Modular rail, L = 1600 mm Bare earth bar, 12 x 3 mm with 330 mm of connection space, equipped with a 35 mm tunnel terminal (for earth blocks with spring terminals) 4 earth blocks with 12 x 4 mm spring terminals (L = 75 mm) 4 earth blocks with 3 x 16 mm spring terminals (L = 37 mm)

&DWQR

Select the enclosuresDD381982

see page 78DD381892

1DD381884

IP wall-mount enclosure


Height of enclosure

Enclosure

Plain door

Transparent door

:DOOPRXQWHQFORVXUH,3

DD381983

2DD381885

Duct, W = 300 mm


Height of duct

Duct, W = 300 mm

Plain door

Transparent door

'XFW,3

DD381985

3 4

Cable tie supports

'HVLJQDWLRQ4 cable-tie supports for 300 mm wide ducts

&DWQR

Accessories for lifting, handling, wall mounting, finishing parts, etc.

31

Functional unitsSystem G

Catalogue numbers

Compact NS400/630 Horizontal Fixed ToggleConnection to the in-duct incoming connection blockDevice No. of vertical modules 9 Mounting plate Cut-out front plate Upstream front plate Incoming connection block 04076

InstallationDD380782

Compact NS installed at top of switchboardNS400/630 (cables via top) NS400/630 (cables via bottom) NS400/630 (cables via bottom) NS400/630 (cables via top) 03070 03270 03803

6

03070

03270

04076

Compact NS installed at bottom of switchboard9 03070 03270 03803 04076

6

03070

03270

04076

Cables via top to in-duct incoming connection block.

DD380781

Cables via bottom to in-duct incoming connection block.

DistributionDD380783

Powerclip insulated busbarsDevice Power supply block 04070 04071 Powerclip insulated busbars see page 99 see page 99

Compact NSNS400 NS630

Powerclip insulated busbars, supplied by 400 A power supply block (04070).

Other distribution solutionsDD380777 DD380761

Rear busbars see page 100.

Multi-stage busbars see page 102.

32


Catalogue numbers

Compact NS400/630 Vertical Fixed Toggle or direct rotary handleToggleDevice No. of Mounting vertical plate modules (1) Cut-out front plate Upstream front plate Downstream frontplate Long terminal shields (set of 2) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P)


Compact NS and Vigicompact NSNS400 NS630 Vigi NS400 Vigi NS630 11 12 13 14 03073 03073 03073 03073 03273 03273 03276 03276 03802 03802 03802 03802 03801 03801

(1) With or without spreaders.

DD380785

Direct rotary handleDevice No. of Mounting vertical plate (1) modules Cut-out front plate Upstream front plate Downstream front plate Long terminal shields (set of 2) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P) 32564 (3P) 32565 (4P)

Compact NS and Vigicompact NSNS400 NS630 Vigi NS400 14 14 17 03074 03074 03074 03275 03275 03277 + 29285 (collar) 03277 + 29285 (collar) 03802 03802 03802 03803 03803 03804

Vigi NS630

17

03074

03802

03804

(1) With or without spreaders.


Powerclip insulated busbarsDevice Power supply block Short terminal shields Powerclip insulated (without connection) (set of 2) busbars 04074 04074 32562 32563 see page 99

Compact NS and Vigicompact NSNS400/630 and Vigi 3P 4P

Powerclip insulated busbars, supplied by power supply block (04074) (supplied without connection).


Rear busbars see page 100.

Multi-stage busbars see page 102.

33


Catalogue numbers

Compact NS100/250 Horizontal Fixed or plug-in ToggleWithout cable duct: with incoming connection blockDevice No. of vertical modules 5 Mounting Cut-out Upstream Connection block plate front plate front plate cables via cables via top bottom 03030 03230 03801 04066 or 04067


Fixed Compact NSNS100/250

Without cable duct: connection directly by cableDevice No. of vertical modules 6 Mounting Cut-out Upstream Long plate front plate front plate terminal shields 03033 03238 03802 Cable tying

Fixed Vigicompact NSVigi NS100/250 29323 (3P) 08867 29324 (4P)

Maximum size of connection cables: 95 mm.Compact circuit breaker with incoming connection block (04066).DD380585

With cable duct: direct connection to the deviceDevice No. of vertical modules 4 4 4 Mounting plate 03030 03033 03033 Cut-out Long terminal front plate shields (set of 2) 03230 03236 03238 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P) 29332 (3P) 29333 (4P)

Fixed Compact NS and Vigicompact NSNS100/250 NS100/250 with ammeter module Vigi NS100/250

Compact NS, plug-inNS100/250 4 03032 03233

Direct connection to the Compact circuit breaker.


PolyblocDevice NS100/250 Vigi NS100/250 3P 4P 3P 4P 3P 4P Polybloc 250 A 04033 04034 04033 04034 04033 04034

Compact NS, Vigicompact NS, Fixed Compact NS and Vigicompact NS

Compact NS, plug-inNS100/250

Distribution using Polybloc (04034).DD380522

Powerclip insulated busbarsDevice Power supply block Terminal shields Powerclip busbars (set of 2) see page 99 see page 99 see page 99

Fixed Compact NS and Vigicompact NSNS100/250 NS100/250 with ammeter module Vigi NS100/250 04060 04060 04060 29321 (3P) 29322 (4P) 29321 (3P) 29322 (4P) 29332 (3P) 29333 (4P)

Compact NS, plug-inNS100/250 04060 + connection must be made see page 99

Distribution via Powerclip insulated busbars and NS250 power supply block (04060).DD380777

Other distribution solutionsDD380761

Rear busbars, see page 100.

Busbars in a duct, see page 102.

34


Compact NS100/250 Vertical FixedToggleDevice No. of devices per row No. of Mounting Cut-out front vert. plate plate mod.(1)

Catalogue numbers

InstallationUpstream Downstream Long front plate front plate terminal shields (set of 2)DD380592

Fixed Compact NS and Vigicompact NSNS100/160 1 7 03040 03243 03802 29323 (3P) 4 x 3P, 3 x 4P 29324 (4P) NS250 1 9 03040 03243 03802 03802 29323 (3P) 4 x 3P, 3 x 4P 29324 (4P) Vigi 1 8 03040 03241 03801 29323 (3P) NS100/160 4 x 3P, 3 x 4P 29324 (4P) Vigi NS250 1 11 03040 03241 03802 03802 29323 (3P) 4 x 3P, 3 x 4P 29324 (4P) (1) With or without spreaders, whatever the distribution solution (Powerclip insulated busbars, Polybloc distribution block, etc.).DD380666

AccessoriesDD381339

Blanking plate for vertical NS100/250 (03249): see page 128.


PolyblocDevice Polybloc 250 A Modular rail (adjustable) 03002 03002 03002 03002

Fixed Compact NS and Vigicompact NSNS100/250 Vigi NS100/250 3P 4P 3P 4P 04033 04034 04033 04034

Distribution using a Polybloc distribution block (04034) on an adjustable modular device rail (03002).DD380593

Powerclip insulated busbarsDevice Univ. power + supply block connection (w/o connection) 04061 04061 + 04062 must be made Short terminal shields (set of 2) 29321 (3P) 29322 (4P) 29321 (3P) 29322 (4P) Powerclip busbars

Fixed Compact NS and Vigicompact NS (1 device centred on mounting plate)NS100/250 Vigi NS100/250 see page 99 see page 99

DD380777


DD380761

Distribution via Powerclip insulated busbars and a 250 A universal power supply block (04061) (without connection) + connection (04062).

Other distribution solutions


35


Catalogue numbers

Compact NS100/250 Horizontal, fixed Direct rotary handle or motor mechanismWithout cable ductDevice No. of Mounting Cut-out Upstream vertical plate front plate front plate modules (1) 03031 03032 03031 03232 03234 03237 + 29285 (collar) 03802 03802 03802 Downstream Long front plate terminal shields 03802 03802 03802 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P)


Fixed Compact NS and Vigicompact NSNS100/250 8 Dir. rotary handle NS100/250 8 Motor mech. Vigi NS100/250 8 Dir. rotary handle

(1) Distribution using Polybloc. Size reduced two modules, lower front plate (03802) not needed.

DD380589

With cable ductDevice No. of Mounting Cut-out Downstream Long terminal shields vertical plate front plate front plate (1) modules 03031 03032 03031 03232 03234 03237 + 29285 (collar) 03802 03802 03802 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P)

Fixed Compact NS and Vigicompact NSNS100/250 6 Dir. rotary handle NS100/250 6 Motor mech. Vigi NS100/250 6 Dir. rotary handle

(1) Distribution using Polybloc. Size reduced two modules, lower front plate (03802) not needed.


PolyblocDevice NS100/250 Vigi NS100/250 3P 4P 3P 4P Polybloc 250 A 04033 04034 04033 04034

Fixed Compact NS and Vigicompact NS

Distribution using Polybloc (04034).DD380591

Powerclip insulated busbarsDevice Univ. power supply block (w/o connection) 04061 04061 Short terminal shields Powerclip busbars (set of 2)

Fixed Compact NS and Vigicompact NSNS100/250 Vigi NS100/250 29321 (3P) 29322 (4P) 29321 (3P) 29322 (4P) see page 99 see page 99

Other distribution solutionsDD380777 DD380761 DD380761

Distribution via Powerclip insulated busbars and a 250 A universal power supply block (04061) (supplied without connection).



36


Compact NS100/250 Vertical FixedDirect rotary handleDevice No. of devices per row No. of Mounting Cut-out vert. plate front mod. (1) plate 03041 03041 03041 03243 03243 03802 Upstream Downstream Long front plate front plate terminal shields 03802 03802 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P) 29323 (3P) 29324 (4P)

Catalogue numbers


Fixed Compact NS and Vigicompact NSNS100/ 160 NS250 Vigi NS100/ 160 Vigi NS250 1 7 4 x 3P, 3 x 4P 1 9 4 x 3P, 3 x 4P 1 8 4 x 3P, 3 x 4P

03244 + 03801 29285 (collar) 1 11 03041 03244 + 03802 03802 29323 (3P) 4 x 3P, 3 x 4P 29285 29324 (4P) (collar) (1) With or without spreaders,whatever the distribution solution (Powerclip insulated busbars, Polybloc distribution block, etc.).

AccessoriesDD380788 DD381339

Blanking plate for vertical NS100/250 (03249): see page 128.


PolyblocDevice Polybloc 250 A 3P 4P 3P 4P 04033 04034 04033 04034 Modular rail (adjustable) 03002 03002 03002 03002

Fixed Compact NS and Vigicompact NSNS100/250 Vigi NS100/250

Distribution using a Polybloc distribution block (04034) on an adjustable modular device rail (03002).DD382304

Powerclip insulated busbarsDevice Univ. power supply block (w/o connection) 04061 04061 connection Short terminal Powerclip busbars shields (set of 2)

Fixed Compact NS and Vigicompact NS (1 device centred on mounting plate)NS100/250 Vigi NS100/250 + 04062 must be made 29321 (3P) 29322 (4P) 29321 (3P) 29322 (4P) see page 99 see page 99

DD380777


DD380761

Distribution via Powerclip insulated busbars and a 250 A universal power supply block (04061) (supplied without connection) + connection (04062).

Other distribution solutions


37


Interpact INS-INV250/630 Horizontal Direct front handleWithout cable duct: with connection blockDevice No. of vertical modules Mounting plate Cut-out front Upstream plate front plate Connection block cables via cables top via bottom 04066 or 04067

Catalogue numbers


Interpact INS-INVINS-INV250 5 03030 03231 03801

Interpact INS-INV250 with incoming connection block (04066).DD380670

With cable duct: direct connection to the deviceDevice No. of vertical modules 4 9 6 Mounting plate Cut-out front Upstream Long terminal plate front plate shields (set of 2) 03231 03271 03271 29324 32565 32565

Interpact INS-INVINS-INV250 INS-INV320/630 cables via top INS-INV320/630 cables via bottom 03030 03070 03070 03803

Direct connection to Interpact INS-INV250.


PolyblocDevice Polybloc 250 A 04033 04034

Interpact INS-INVINS-INV250 3P 4P

Distribution using Polybloc (4P).DD381349

Powerclip insulated busbarsDevice Power supply block 04060 04070 04071 Powerclip busbars see page 99 see page 99 see page 99

Interpact INS-INVINS-INV250 INS-INV320/400 INS-INV500/630


Distribution via Powerclip insulated busbars and NS250 power supply block (04060).


Multi-stage busbars, see page 102.

38


Catalogue numbers

Interpact INS-INV250/630 Vertical Direct front handle Lateral handleDevice Mounting Cut-out Upstream Downstream No. of plate front plate front plate front plate vertical modules (1) Long terminal shield (set of 2) 29324 29324 32565 03802 32565


Interpact INS-INVINS-INV250 front 8 handle INS-INV250 lateral 8 handle INS-INV320/400 front 10 handle INS-INV500/630 front 12 handle (1) With or without spreaders. 03040 03032 03073 03073 03274 03274 03248 03801 03806 03802 03802


PolyblocDevice Polybloc 250 A 3P 4P 3P 4P 04033 04034 04033 + 04037 04034 + 04037 Modular rail adjustable 03002 03002 03003 03003

Interpact INS-INVINS-INV250 front handle INS-INV250 lateral handle 04037: copper spacer.

Distribution using a Polybloc distribution block (04034) on an adjustable modular device rail (03002).

DD381348

Powerclip insulated busbarsDevice Power supply + connection block (w/o connection) 04061 04074 Short terminal Powerclip busbars shield (set of 2)

Interpact INS-INVINS-INV250 INS-INV320/630 + 04062 29322 must be made 32563 see page 99 see page 99

Distribution via Powerclip insulated busbars and a 250 A universal power supply block (04061) (without connection) + connection (04062).



Multi-stage busbars, see page 102.

39


Catalogue numbers

Manual source changeover system Fixed NS100/250, front connection Direct rotary handleDevice No. of vertical modules 10 Mounting plate Cut-out front plate Upstream front plate Downstream front plate

Source changeover system with mechanical interlockingDD380535

Compact NS with direct rotary handleNS100/250 03043 03245 03802 03803

ON I

reset

O OFF

O

Designation Cat. no. Interlock 29369 Coupling accessory 29358 (for 3P device) 29359 (for 4P device) Long terminal 29323 (3P) shields (set of 2) 29324 (4P)

40


Manual source changeover system INS-INV250Front direct rotary handleDevice No. of vertical modules 9 Mounting plate Cut-out front plate Upstream front plate Downstream front plate

Catalogue numbers

Source changeover system with mechanical interlockingDD380536

Source changeover system with mechanical interlockingINS-INV250 changeover system Designation Mechanical interlock Coupling accessory 03043 + 31064 x 2 03235 03802 03802

I ON

I ON

OFF O

Cat. no. 31073 29358 (for 3P device) 29359 (for 4P device) Long terminal shields 29324 (set of 2)

Complete source changeover assemblyDD380537

Device

No. of vertical modules 9 Rating

Mounting plate

Cut-out front plate

Upstream front plate

Downstream front plate

Complete source changeover assemblyINS-INV250 changeover system Designation 03043 For 3P device 31140 31144 31142 31146 03247 For 4P device 31141 31145 31143 31147 03802 03802

Complete source 100 A changeover assembly 160 A 200 A 250 A Designation Coupling accessory

Cat. no. 29358 (for 3P device) 29359 (for 4P device) Long terminal shields 29324 (set of 2)

41


Fupact INF HorizontalDirect front rotary handle

Catalogue numbers


Device

No. of devices per row


Mounting plate

Cut-out front plate

Downstream Long terminal front plate shields (qty per device)

Switch-disconnector fusesINF32/40 INF63 1x3/4P 3 03113 03313 1x3P 5 03114 03314 1x4P 5 03114 03314 INF100/160 (1) 1x3P 7 03114 03314 03802 1x4P 7 03114 03314 03802 (1) For direct distribution, downstream front plate (03802) not needed. 49658 49658 x 2 49659 x 6 49659 x 8

INF32/40.DD382475

INF100/160.


Multi-stage busbars in a ductDevice INF32/40 INF63 INF100/160 Connection must be made must be made must be made Multi-stage busbars see page 102 see page 102 see page 102

Switch-disconnector fuses

Powerclip busbars (1)Device Additional 35mm2 block + connection Powerclip busbars

Switch-disconnector fusesINF100/160 INF100/160 3P 4P 04155 04156 + must be made + must be made see see page 102

(1) incoming device; the distribution system is installed under the functional units

Other distribution solutionsD380777

Rear busbars(1) see page 102

42


Fupact INF VerticalDirect front rotary handle

Catalogue numbers


Device

No. of devices per row


Mounting plate

Cut-out front plate

Downstream Long terminal front plate shields (qty per device)

Switch-disconnector fuses4 x 3P 3 03113 03312 3 x 4P 3 03113 03313 INF63 3 x 3P 5 03114 03314 2 x 4P 5 03114 03315 INF100/160 (1) 2 x 3P 7 03114 03315 03802 2 x 4P 7 03114 03315 03802 (1) For direct distribution, downstream front plate (03802) not needed. INF32/40.DD382478

INF32/40

49658 49658 x 2 49659 x 6 49659 x 8

INF100/160.


Polybloc distribution blockDevice INF100/160 3P 4P Polybloc 04031 x 3 04031 x 4 Adjustable modular device rail 03002 03002

Switch-disconnector fuses

Powerclip usbars(1)Device Universal power supply block + connection Powerclip busbars

Switch-disconnector fusesINF100/160 04061 + must be made see page 102 (1) incoming device; the distribution system is installed under the functional units

Other distribution solutionsDD380761

Rear busbars(1) see page 102

Multi-stage busbars in a duct, see page 102.

43


Catalogue numbers

Modular devices NG125 circuit breakers NSA125/160 circuit breakers INS40/160 switch-disconnectorsGeneralA rigid modular rail Made using an aluminium alloy, the rail design is extremely rigid. The rail supports are crimp mounted. Fast mounting The pre-mounted rail supports have positioning studs to guide the rail at the rear of the enclosure. Only two mounting screws are required. Multiple functions A number of devices clip directly onto the rear of the rails, including 80 A and 200 A Multiclip distribution blocks, all horizontal cable-running accessories such as cable straps and trunking supports, as well as the supports for earth bars. Supply from all directions Supply to the rows, using comb busbars or Multiclip distribution blocks, can be via: b a Polybloc distribution block installed on the incoming device b Powerclip insulated busbars installed behind the devices b multi-stage busbars installed in a lateral duct b flat busbars installed at the rear of the enclosure.


Distribution using Powerclip busbars: see page 99.PD390543

Distribution blocksMulticlip distribution blocks Fast and secure front connection using spring terminals. Particularly reliable connections, will not loosen over time, insensitive to vibrations and thermal variations. All types of modular devices can be mixed. Easy balancing of phases. Interchangeable devices. Easy installation upgrades. Fully insulated. Comb busbars Direct connection to device terminals or via a connector. Fully insulated. Can be cut to length.

Cable runningCable straps Easy and fast to install. Low cost. Trunking Perfectly integrated cable running. Attractive.

Distribution using Distribloc in a Pack wall-mount enclosure: see page 108.

44


Catalogue numbers

Modular devices NG125 circuit breakers NSA125/160 circuit breakers INS40/160 switch-disconnectorsDevice No. of vertical modules Modular rail Modular front plate

Multi 9 devicesDD380678

All Multi 9 devicesAll supply systems (comb busbars, Multiclip) with cable straps and trunking sections 4 03001 03204

Multi 9 devices y 40 ASupply via 63/80 A Multiclip or comb 3 03001 03203 busbars with cable straps Capacity of modular rail: 48 Multi 9 modules. Note: For a modular row with a 160 A (half row) and 200 A Multiclip distribution block positioned directly below a non-modular mounting plate (Compact, Interpact, etc.), or at the top of a switchboard, add one vertical module (i.e. 4 + 1) and a plain upstream front plate (03801). Supply: 80 A Multiclip. Cable running: cable straps. Mounting requires 3 vertical modules.

NG125 circuit breakerDD382417

Device

No. of vertical modules 5

Modular rail

Modular front plate 03205

NG125 circuit breakerNG125, Vigi NG125 03001

Direct supply via cables. Capacity of modular rail: 48 Multi 9 modules.Width of NG125 circuit breakers: NG125 3P : 9 Multi 9 modules NG125 4P : 12 Multi 9 modules Vigi NG125 3P : 18 Multi 9 modules Vigi NG125 4P : 21 Multi 9 modules

NSA125/160 circuit breakerDD380686

Device


Modular rail (adjustable) 03002

Modular front plate 03205

NSA125/160 circuit breakerNSA125/160 Vigi NSA125/160

Direct supply via cables. Capacity of modular rail: 48 Multi 9 modules.Note: To mix an NSA125/160 circuit breaker with Multi 9 modular devices, order (with the device) the symmetrical rail + raiser set(28041). Width of devices: NSA125/160 3P: 10 Multi 9 modules NSA125/160 4P: 14 Multi 9 modules Vigi NSA125/160 3P: 24 Multi 9 modules Vigi NSA125/160 4P: 27 Multi 9 modules

INS switch-disconnectorDD380685

Device

No. of vertical modules 4 5

Modular rail

Modular front plate 03204 03205

INS40/160INS40/160 INS100/160 with long terminal shields 03001 03001

Direct supply via cables. Capacity of modular rail: 48 Multi 9 modules.Width of devices: INS40/80: width 10 Multi 9 modules INS100/160: width 15 Multi 9 modules

45


Catalogue numbers

Modular devices NG125 circuit breakers NSA125/160 circuit breakers INS40/160 switch-disconnectorsBusbar selectionsee page 99.DD380679 DD380674

Powerclip insulated busbarsDD381212

Tap-off blocks for insulated busbars (04151).

Supply to a 200 A Multiclip distribution block (04021).

DD381610

Connection 04145.

Cover for connection 04150.

Rear busbarsDD381213 DD381214

Busbar selectionsee page 100.DD381215

200 A Multiclip connection (04029).

125 A connection to a comb busbar (04145).

Busbars in a ductDD381216 DD381397

Busbar selectionsee page 102.

Supply to a 200 A Multiclip distribution block (04024).

46


Catalogue numbers

Modular devices NG125 circuit breakers NSA125/160 circuit breakers INS40/160 switch-disconnectorsDesignation125 A Distribloc distribution block 160 A Distribloc distribution block see page 108

Distribloc distribution blockDD381308

Cat. no.04045 04046

Multiclip distribution blocksDD380675

DesignationMulticlip, 80 A, 4P Multiclip, 63 A, 4P, 1/2 row Multiclip, 200 A, 2P Multiclip, 200 A, 3P Multiclip, 200 A, 4P Multiclip, 160 A, 4P, 1/2 row Connection between 200 A Multiclip and Powerclip insulated busbars see page 114

Cat. no.04004 04008 04012 04013 04014 04018 04021

Comb busbarsDD380755

For C60 circuit breakers Designation1P 2P 3P 4P 24-module comb busbar (9 mm modules) Two 48-module comb busbars (9 mm modules) 24-module comb busbar (9 mm modules) Two 48-module comb busbars (9 mm modules) 24-module comb busbar (9 mm modules) Two 48-module comb busbars (9 mm modules) 24-module comb busbar (9 mm modules) Two 48-module comb busbars (9 mm modules)

Cat. no.14481 14891 14482 14892 14483 14893 14484 14894

For C120 and NG125 circuit breakers Designation1P 2P 3P (W = 430 mm, 16 poles) (W = 430 mm, 16 poles) (W = 430 mm, 16 poles) (W = 430 mm, 16 poles)

Cat. no.14811 14812 14813 14814 14818

4P

Thoot caps (set of 20)

Cable runningDD380812

DesignationCable straps 12 vertical cable straps 2 covers, 1-meter long, for vertical cable straps 12 horizontal cable straps 4 covers, 430 mm long, for horizontal cable straps Trunking 4 horizontal sections, 60 x 30 mm, L = 450 mm Vertical section, 80 x 60 mm, L = 2 m 12 horizontal trunking supports 12 vertical trunking supports see page 126

Cat. no.04264 04263 04239 04243 04257 04267 04255 04265

Blanking platesDD380805

DesignationBlanking strip, H = 46 mm, L = 1 m 4 divisible blanking plates, H = 46 mm, L = 90 mm see page 128

Cat. no.03220 03221

47


Industrial control devices

Catalogue numbers

Series D and K contactorsDD381613

Device


Useful rail length (mm)

Rear modular Plain front plate rail

Series D and K contactorsSeries D and K contactors y 40 A 432 03004 03803

GV2/GV3 circuit breakersDD381317

Device

No. of vertical modules 3 5

Useful length of rail (mm) 432 432

Modular rail

Cut-out front plate

GV2/GV3 circuit breakersGV2 GV3 03001 03002 03203 03205

Width of devices without lateral auxiliaries: 45 mm. AccessoriesDD381426

Modular blanking plates: see page 128.

GV2 + contactor combinationDD381318

Device


Useful length of rail (mm) 432

Rear modular Transparent rail front plate

Plain front plate

GV2 + contactor combinationGV2 + Series D or K contactor y 40 A 03004 03342 03801

Width of devices without lateral auxiliaries: 45 mm.

TeSys U modelDD381319

Device


Useful length of rail (mm) 432

Rear modular Transparent rail front plate

TeSys U modelTeSys U model 03004 03342

Width of devices without lateral auxiliaries: 45 mm.

48


Industrial control devices

Catalogue numbers

LH4 soft startersDD382601

Device

Plain front No. of vertical Useful length Rear modular rail plate modules of rail (mm) 4 432 03004 03804

LH4 soft startersLH4 N1 LH4 N2

Width of devices: LH4 N1: 45 mm. LH4 N2: 90 mm.

Tego PowerDD382602

Device

No. of vertical Mounting modules plate

Transparent Upstream front plate front plate

Downstream front plate

Tego PowerTego Power 2 to 8 feeders 8 03168 03343 03801 03801

ATS01 soft startersDD382603

Device

No. of vertical Useful length Modular rail Plain front modules of rail plate (mm) 4 5 5 6 5 5 5 432 432 432 432 432 432 432 03004 03003 03003 03003 03003 03003 03003 03804 03805 03805 03806 03805 03805 03805

Modular railATS01N103/106FT ATS01N109/112FT ATS01N206 to 212 ATS01N222 to 232 ATS01N230LY ATS01N244LY ATS01N244Q

No. of vertical Recessed slotted modules mounting plateDD382604

Plain front plate 03806 03806 03806 03806

Slotted mounting plateATS012N272LY ATS012N285LY ATS012N272Q ATS012N285Q 6 6 6 6 03172 03172 03172 03172

Width of devices: ATS01N103/106FT: 22,5 mm ATS01N109/112FT: 45 mm ATS01N206 to 212: 45 mm ATS01N222 to 232: 45 mm ATS01N230LY: 180 mm

ATS01N244LY: 180 mm ATS01N244Q: 180 mm ATS012N272LY: 180 mm ATS012N285LY: 180 mm ATS012N272Q: 180 mm ATS012N285Q: 180 mm

LV/LV transformerDD382605

Device

No. of vertical Recessed slotted modules mounting plate

Plain front plate

LV/LV transformerABL6-TS/TD up to 630 VA ABL6-RF up to 120 W 4 4 03171 03171 03804 03804

49


Human-switchboard interface

Catalogue numbers

Measurement devices with interface and plastic mounting platesDD381705

Front plate with cut-outs, four mounting plates and one plain mounting plate for 72 x 72 mm devices.DD381684

Presentation The interface for 72 x 72 and 96 x 96 mm measurement devices is made up of: b a special front plate with cut-outs (03904) for plastic mounting plates b plastic mounting plates for the 72 x 72 or 96 x 96 mm devices. The front plate can be equipped with: b five mounting plates with cut-outs for 72 x 72 mm devices b four mounting plates with cut-outs for 96 x 96 mm devices. It can also be equipped with plain plastic mounting plates to blank off any unused positions. The plain mounting plates can be easily cut out for lamps, pushbuttons or 72 x 72 mm devices. Each mounting plate has a cable-running system for auxiliary wires and can be identified by a label. Installation The interface for 72 x 72 and 96 x 96 mm devices is installed similar to a front plate: b in the device zone of enclosures b on a partial door with cut-outs in wall-mount and floor-standing enclosures (except IP55). The degree of protection for installed devices is IP30. Cat. no. selection DesignationFront plate (3 modules) for five 72 x 72 mm or four 96 x 96 mm devices Mounting plate for 72 x 72 mm with cut-outs device plain Mounting plate for 96 x 96 mm with cut-outs device plain Doors with cut-outs for the measurement-device interface Partial door 6 modules IP30/31/43 enclosures (08851) see page 78

60 40 10 0

Cat. no.03904 03902 03900 03903 03901

A

60 40 10 0

A

60 40 10 0

A

60 40 10 0

A

Mounting on a cubicle door cut-out (System P).DD381685

DD381687

60 40 60 40 60 40 10 0 10 0 10 0

A

A

A60

40 10 0

A

The mounting plates have guides for auxiliary wires.

DD381688

Mounting plates can be identified by a label (not supplied).

Note: For degree of protection IP55, devices must be installed behind a transparent door. If they are installed on the door, use the mounting plates intended for IP55 enclosures (see page 86). Mounting in the device zone of an enclosure (System G).

DD380862

Visor for measurement devicesPresentation The interface with the plastic mounting plates for 72 x 72 mm and 96 x 96 mm devices can be mounted on a visor. The visor can be installed on 300 and 400 mm wide doors with cut-outs in cubicles or on partial doors in wall-mount and floor-standing enclosures. It is supplied with a drilling diagram for mounting on a plain door.60 40 10 060 40 10 0

A

A

Cat. no. selection DesignationVisor for measurement devicesDD381686

Cat. no.03928

60 40 10 0

A

60 40 10 0

A

60 40 10 0

A

60

Visor mounted on a cubicle door cut-out.60 40 10 0

40 60 40 10 0

A

A

10 0

A

Visor mounted on the partial door of an enclosure.

50


Human-switchboard interface

Catalogue numbers

Measurement devices on a metal front plate

Installation The 72 x 72 mm or 96 x 96 mm measurement devices are installed directly on a front plate with cut-outs, H = 150 mm (3 modules): b in the device zone of enclosures b on a

Documents

Cat Prisma G MG