THE 3D PRINTING SOLUTIONS COMPANY™

CASE STUDY

“Creating a new motorcycle from scratch is a massive, multifaceted undertaking. 3D printing played a crucial role by giving us the ability to formulate new ideas and test them the next day.”

Brian Case / Motus Motorcycles

Completed prototype with 3D printed and painted engine model.

Paving the Way 3 D P R I N T I N G H E L P S S H A P E A M E R I C A’ S F I R S T S P O R T- T O U R I N G B I K E

Motus Motorcycles began in 2008 by Brian Case and Lee Conn, two motorcycle enthusiasts who set out to build the perfect

bike: a modern sportbike that could take a rider far and fast. This type of sport-touring bike had never been built by an

American company before, and their ideal engine didn’t exist yet either. So they decided to build that too.

THE 3D PRINTING SOLUTIONS COMPANY™

Streamlined Design ProcessThe company designed and tested their first two prototypes in 2012, and many significant design changes were needed. All 22 castings in the engine needed to change, as well as the chassis, electrical, exhaust and other systems. Electronic fuel injection, new porting, splayed exhaust valves and other refinements were also needed for improved long-term durability, cooling and oiling.

Redesigning and tooling new engine castings would take about a year, and all of the other changes depended on the new engine design. Instead of waiting a year before moving forward with designing all the new elements, Motus moved forward using a 3D printed engine model.

“If we had waited for the metal engine prototype to begin the detailed design of the rest of the bike, it would have taken us two years to go from our first prototype to production,” Case said. “With 3D printing, we were able to redesign, tool and build the engine, chassis, exhaust and electrical systems, and other components simultaneously in only one year.”

Building the Perfect BikeMotus was already using a uPrint® 3D Printer from Stratasys to print small brackets and bearings for the new bike. But 3D printing larger prototype parts for the engine required a larger system, so Motus Design Director Brian Case used a Fortus® 3D Production System to print accurate models of the castings for the engine exterior.

Each casting was 3D printed as a separate piece and bolted together to test the engine assembly. The assembled engine was then used to design other key components of the bike, including the exhaust system, which was built from steel tubing and tack welded on the 3D model engine.

“Creating a new motorcycle from scratch is a massive, multifaceted undertaking,” Case said. “3D printing played a crucial role by giving us the ability to formulate new ideas and test them the next day.”

Motus’ groundbreaking motorcycle design includes a 6-speed transmission and a custom designed V4 engine, the first V4 ever used in an American motorcycle. Known as the Baby Block V4, its design is based on the same small block engine architecture found in the most cars and trucks.

“When we received the metal prototype engine, we removed the plastic model, and bolted on the metal engine. Everything fit perfectly and we were able to move immediately into production, Case said. “Revenues only started flowing after we started production, so the year we saved was critical to the success of our company.”

Smaller engine parts like brackets and bearings are printed on uPrint 3D Printer.

Larger engine model parts are printed on Fortus 400mc 3D Printer.

3D printed engine model assembled on a bike.

Motus V4 Baby Block engine is the first V4 used on an American motorcycle.

ISO 9001:2008 Certified

© 2016 Stratasys Ltd. All rights reserved. Stratasys, Stratasys signet, uPrint, Fortus and FDM are trademarks or registered trademarks of Stratasys Ltd. and/or its subsidiaries or affiliates and may be registered in certain jurisdictions. All other trademarks belong to their respective owners. Product specifications subject to change without notice. Printed in the USA. CS_FDM_AU_Motus_0716a

E in fo@st ra tasys .com / STR ATASYS.COM

HEADQUARTERS7665 Commerce Way, Eden Prairie, MN 55344+1 800 801 6491 (US Toll Free)+1 952 937-3000 (Intl)+1 952 937-0070 (Fax)

2 Holtzman St., Science Park, PO Box 2496 Rehovot 76124, Israel +972 74 745 4000+972 74 745 5000 (Fax)

The final creations, the Motus MST and MST-R, are the only sport-touring motorcycles in the United States offering riders performance and speed that’s comfortable on long open roads. Recently, an unmodified production Motus MST-R motorcycle shattered two world land speed records at the Bonneville Salt Flats.

Built in small quantities with great attention to detail, this one-of-a-kind motorcycle is a dream come true for Motus founders Case and Conn, a dream realized faster than anticipated thanks to 3D printing.

Motus MST motorcycle is now in production.

TIME TO GET BIKE INTO PRODUCTION FROM FIRST PROTOTYPE

TIME

Traditional manufacturing

2 years

3D printing 1 year

Savings 1 year50%