Upload
moshe-elkobi
View
142
Download
1
Embed Size (px)
Citation preview
A-2200
Carrier Ethernet Edge Switch
Nokia Siemens Networks A-2200 Carrier Ethernet Edge Switch is part of the complete NSN end-to-end packet transport solution the comprises access, aggregation core and management.
A-2200 support a diverse selection of services and applications which include: Enterprise, Mobile Backhaul and Converged networks.
A-2200 is a ,modular multi-service switch, supporting both Ethernet and legacy TDM applications.
This 1.5U MEF-certified device is equipped with two redundant hot-swappable AC or DC power supplies, redundant fans and Dry Contact alarm interface for alarm management.
A-2200 is full managed by the ASPEN management system offering end-to-end management solution and enables efficient point & click configuration, SLA measurement, traffic engineering and network resource allocation.
Features:
• Carrier-class features such as
redundant power supplies, N+1 fan
redundancy and dry contact
• Multi-service enabled, including E-
Line, E-LAN, E-Tree, and CES
services, on a single device
• CES support including E1/T1, DS3,
OC3/STM-1 with 1+1 APS protection
• High Bandwidth & Capacity – 4x1G
uplink and up to 20x1G access ports
• Support for Hard QoS such as CIR,
EIR, H-QoS, Shaping and WRR
• Support for 50ms carrier-class
protection, Multi failure protection
and In-Service-SW-Upgrade (ISSU).
• High performance and very low
delay and jitter
• Standard OAM mechanism and
protocol support (IEEE802.1ag,
Y.1731)
With the rapid increase in the need
for high bandwidth, and the equally
impressive increase in the
performance of Ethernet within the
LAN environment, the demand for
metro network performance has
never been greater.
The biggest challenge for service
providers of all types is to deliver
not only cost-effective and scalable
performance, but also, and more
importantly, a Carrier Ethernet
solution that facilitates new
services, rapid and easy
provisioning and dramatically
reduced operational costs.
Rev 2.0
• Hard QoS supporting CIR, EIR
and priority with 64Kbps and
1Mbps granularity
• Traffic Shaping and
Connection Admission Control
(CAC), ensuring end-to-end
bandwidth guarantee
• SONET-like 50ms protection
using Fast Reroute protocol that
is much faster and more
scalable than Spanning Tree or
Rapid Spanning Tree protocol
• Strong and comprehensive
OAM functions including fast
and pinpoint fault detection,
alarm-service correlation,
Ethernet loop-backs, as well as
round-trip delay, jitter and
packet loss measurement
• Wire-speed performance
• Very low delay and jitter
• Flexible and intelligent
customer traffic mapping
mechanisms that allows multi-
services on one access
interface
• Up to 2,000 protected
connections per device
• Advanced synchronization
including ACR (Adaptive Clock
Recovery), Synchronous
Ethernet and IEEE1588V2
• Strong management
capability
Functions
Product Overview
Nokia Siemens Networks A-2200 complements the A-2000 series product line by adding extended switching
capacity for the most mission critical applications and for providing Ethernet services from Carrier Central Offices, PoPs and Collocation Cages. It is a one and half rack-unit high, compact Carrier
Ethernet Edge Switch that
delivers cost-effective 10/100 Ethernet, Gigabit Ethernet and CES/TDM access interfaces for end customers. All the access modules are hot swappable. It
has four Gigabit Ethernet SFP/SSF-pluggable ports for connectivity to the Carrier Ethernet core network. Redundant load-sharing AC and DC power are also hot swappable and field
Replaceable Fan Units.
The A-2200 can be deployed as high-end CPE working with the Nokia Siemens Networks A-4000 and A-8000 series of Carrier Ethernet Core
Switches and Nokia Siemens Networks’ASPEN management system. In addition, the A-2200 can be used as an aggregation switch working together with the A-210 or A-1180 demarcation
device to provide a very cost-effective access solution. The A-2200 will also be part of the NSN CET Next-Generation solution and fully
interoperate with CET NG switches. Using these products in conjunction, carriers and service providers can construct a powerful Metro infrastructure with high performance
and efficiency, designed to quickly deliver profitable communication services.
The A-2200 features 8Gbps non-blocking switching capacity. It offers up to 2,000 protected simultaneous connections supporting point-to-point,
point-to-multipoint and multipoint-to-multipoint services. Customer traffic can be mapped to connections using multiple and flexible rules from layer 1 (port-based) up to layer 3 (IP Address,
Protocol Type and DSCP bits).
End-to-End Carrier Ethernet Solution
ASPEN SERVICE MANAGEMENT
Demarc Edge Aggregation Core
A-2200
MX 480MX 960
A-1180
A-2200
A-2200
A-2200
A-1200
Eth
BTS
NB
E1A-2200
BSC
STM-1
RNC
Eth
A-210
A-210 IP/MPLS
Applications
MEF-Compliant Service Attributes
The A-2200 delivers flexible, affordable Fast Ethernet and Gigabit Ethernet
access interfaces, supporting point-to-point, point-to-multipoint and multipoint-to-multipoint services. Customer traffic can be mapped to connections using any combination of rules from layer 1 to
layer 3.
The A-2200 fully supports SLAs defined
by MEF service definitions including:
• Committed Information Rate (CIR)
• Excess Information Rate (EIR)
• Priority for bounded delay and jitter
• Protection levels (sub-10sec or sub-50ms)
In addition to pure Ethernet connectivity, service providers can migrate legacy TDM traffic onto their
Carrier Ethernet network using Nokia Siemens Networks Circuit Emulation Services modules that provide ITU-T compliant E1/T1, E3/T3 and STM-
1/OC-3 interfaces.
Full Protection and Reliability
The A-2200 has been designed todeliver the SONET-like reliability thatcarriers demand, but with the price,performance and scalability of CarrierEthernet. The protection mechanism of
the A-2200 is similar to MPLS Fast Reroute, and thus can achieve sub-50ms fail-over time.It also offers an end-to-end protectionmechanism that protects against any
types of failure within sub-10seconds,according to service profiles, and in addition, Multi-Failure protection and In-Service-SW-Upgrade
Industry-Leading Service Provisioning
and Management Solution Nokia Siemens Networks Service Provisioning for EthernetNokia Siemens Networks’ ASPENsolution is the industry’s simplest
network management and servicemanagement platform for managingCarrier Ethernet services. ASPEN delivers enhanced service management capabilities for rapid service
provisioning, comprehensive network and element management, performance and fault management, and seamless integration with existing OSS applications. ASPEN software
allows carriers and service providers to reliably and cost-effectively manage all elements of the network to deliver the most reliable, scalable and cost-
effective Ethernet service offerings. Using a multi-layered modular architecture, ASPEN software supports large, dynamic carrier-class networks and is ideal for minimizing hardware
deployment time, service planning, provisioning and monitoring.
Mobile Backhauling applicationsA-2200 can be used as 2G/3G aggregator in tail sites, as tail site
aggregator at Hub sites and as scalable aggregator at MWR Edge sites.
The A-2200 as a MBH solutions offers:•TDM and Ethernet interfaces
supporting 2/3G and future LTE. •Support of E1, T1, DS-3, OC-3/STM-1•Advanced synchronization mechanisms (ACR, SyncE, IEEE1588V2)
•QOS assurances for delay, jitter and loss•Shaping per port•Standard OAM mechanisms and protocols
•APS 1+1 protection of STM-1/OC-3•ASPEN E2E Management
Multi-service CPE with HighService Availability for BusinessCustomers
The A-2200 boasts a broad range of intelligent network services, featuring granular Quality of Service (QoS) and sub-50ms protection that enable service providers to rapidly provision
secure Ethernet access with fully MEF-compliant Service Level Agreements (SLAs).• High revenues from multi-services• Fast trouble-shooting with the help of
strong OAM functions• Flexible customer traffic mapping schemes• Support for single-strand fiber, reducing fiber cost
• Ease of management and service provisioning
Multi-service Aggregator in Central Office (CO)Suitable for CO and street cabinet
deployment with Dry Contact alarm interface, the A-2200 can be used in the CO to aggregate multiple business customers and deliver flexible, affordable E-Line, E-LAN and E-Tree
Ethernet services as well as TDM services.• Rich set of interfaces with high port density allows aggregating many customers of various types
• A complete solution working with A-1180 and A-210 demarcationdevices, providing end-to-end management and OAM functions• Single-strand fiber interfaces,
reducing fiber cost almost by half• Support for TDM grooming functions (T1/E1 to DS3 & OC-3/STM-1), helping keep the existing TDM-based services
unchanged while providing new Ethernet services.
Advanced QoS mechanisms
The A-2200 offers a variety of tools for QoS and SLA:• Hard QoS supporting CIR, EIR and priority • Traffic Shaping and Connection
Admission Control (CAC) • WFQ with Strict priority• Shaper per port and per service• Policing and DiffServ.
Standards
• IETF Standards
• RFC 768 • RFC 1907
• RFC 783 • RFC 2030
• RFC 791 • RFC 2236
• RFC 792 • RFC 2863
• RFC 793 • RFC 2668
• RFC 826 • RFC 2737
• RFC 854 • RFC 2495
• RFC 1157 • RFC 4252
• RFC 1256 • RFC 4253
• IETF Standards:
MIB Support
• IanaifType • RFC 2737
• RFC 2096 • RFC 2863
• RFC 2668 • RFC 2495
• RFC 1213 • RFC 2558
• Metro Ethernet Forum
Standards
• MEF 9 • MEF 8
• MEF 14
• IEEE 802 Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3z
• IEEE 802.3ad
• IEEE 802.1p
• IEEE 802.1D
• IEEE 802.1Q
• IEEE 802.1ad
• IEEE 802.1ag
• IEEE 802.1ah
• IEEE 802.1w/s
All specifications are subject to change.
Gigabit Ethernet 1000Base-X ports, accommodating hot-swappable SFP/SSF transceivers with digital diagnostic monitoring (DDM) support, LC connector:• 1000Base-SX Multi-mode (500m)
• 1000Base-LX Single-mode (10km)• 1000Base-LH Single-mode (70km)• 1000Base-LH Single-mode (120km)• Coarse Wavelength Division Multiplexing (CWDM) interfaces (70km, 100km)
• Fast Ethernet 10/100/1000 Base-TX ports, RJ-45 connectors
Gigabit Ethernet 100/1000Base-X ports, accommodating hot-swappable SFP transceivers, SC connector:
• 1000Base-SX Multi-mode (500m)• 1000Base-LX Single-mode (10km)• 1000Base-LH Single-mode (70km)• Coarse Wavelength Division Multiplexing (CWDM) interfaces (50km, 100km)
• E1/T1 ports, RJ-45 connectors• DS3 ports, mini DIN connectors• STM-1/OC-3 ports, accommodating SFP transceivers, LC
connectors:– STM-1/OC-3 SFP Transceiver, 2km, 1310nm, MMF– STM-1/OC-3 SFP Transceiver, 15km, 1310nm, SMF– STM-1/OC-3 SFP Transceiver, 40km, 1310nm, SM– STM-1/OC-3 SFP Transceiver, 80km, 1550nm, SMF
NEBS LEVEL 3 – In future release
[• GR-1089, GR-63 – in future release]RoHSEMC• USA & Canada: FCC 47 CFR part 15 Subpart B, Class B• Europe: EN 300-386-2, Class B, EN 201 468,
EN 300 132-2, EN 300 132-3• Japan: VCCI, Class B – In future release
• USA: UL 60950
• Europe: EN 60950
• ASPEN• RS-232 Administration Console: Industry-standard Command Line Interface (CLI )• Out-of-band management via 10/100Base-TX port• In-band management of entire network via Gigabit Ethernet
port• Dedicated management VLAN• Supports multiple NMS stations• SNMP
• Telnet, Modem• Security – RADIUS, SSH
A-2200 Specifications
Network Ports
Access ports - Ethernet
Access ports - TDM
Regulatory
Safety
Management
www.nokiasiemensnetworks.comRev 2.0
• 442 X 66.5 X 230 mm (WxHXD)Dimensions
• 10 Port 100/1000Base-FX SFP
• 8 Port 10/100/1000Base-TX copper• 8 port T1/E1 CES• 16 port T1/E1 CES• 4 port DS3 Clear Channel [Future]• 4 port OC-3/STM-1 [Future]
Access modules
• Chassis + Fan Tray – 51.5W
• 10 Port Base-FX SFP – 9.05W• 8 Port Base-TX copper – 9.33W• 16 port T1/E1 CES + TIC – 14W• 4 port DS3 CES – 14W• 4 port OC3 CES – 24W
Power Consumption