Embed Size (px)
Citation preview
Carnival RunnerDesigned by Helle-May Designs
Featuring Grand Illusion by Katia Hoffmansize: 14” x 46”
windhamfabrics.com06.01.19
FREEPROJECT
please note: before making your project, check for any pattern updates at windhamfabrics.com’s free projects section.
e: [email protected] p: 201-659-0444 • f: 201-659-9719
this is a digital representation of the quilt top, fabric may vary.
Carnival Runner
1
windhamfabrics.com
KEY FABRIC SKU YD CUTTING INSTRUCTIONS
A 51219M-X Multiincludes binding 1 (4) 2½” x WOF strips for binding.
Save remaining fabric for fussy-cutting in Step 2.
B 51224M-1 Black ⅝
(3) 1½” x WOF strips. Subcut into:__(4) 1½” x 7½” rectangles,__(4) 1½” squares and__(24) 1½” x 2½” rectangles. (1) 2” x WOF strip. Subcut into:__(2) 2” x 10½” rectangles for Border 1.(2) 2” x 39½” strips for Border 1.(3) 1½” x WOF strips for Border 3.
C 51222M-2 Purple¼ or 1 FQ
(7) 1½” x 2½” rectangles for Border 2.
D 51222M-3 Teal¼ or 1 FQ
(7) 1½” x 2½” rectangles for Border 2.
E 51222M-4 Crimson¼ or 1 FQ
(7) 1½” x 2½” rectangles for Border 2.
F 51222M-6 Gold¼ or 1 FQ
(7) 1½” x 2½” rectangles for Border 2.
Backing (your choice) ¾ 18” x 50” piece of batting.
Cutting Notes: Mark and store your cutting pieces according to the block they have been assigned to, as this will make it much easier when you start piecing. Be sure to read the entire pattern before you begin.
WOF = Width of Fabric
Fussy-Cutting Instructions
1. Iron fabric carefully to remove all creases without distorting the print.
2. Fussy-cut five (5) 7½” Fabric A square blocks centered on the Medallions as shown in Diagram 1 below.
DIAGRAM 1
Carnival Runner
2
windhamfabrics.com
WOF = Width of Fabric
Runner Assembly
3. Sew the (5) Fussy-cut Medallion Blocks together with (4) 1½” x 7½” Fabric B rectangles. Press toward Fabric B, as shown in Diagram 2.
4. Sew a 2” x 39½” Fabric B strip to each side for Border 1. Press toward Fabric B, as shown in Diagram 3.
5. Sew a 2” x 10½” Fabric B rectangle to each end to complete Border 1. Press toward Fabric B, as shown in Diagram 3.
6. Using Diagram 4 as a color placement guide, sew together two short end sections of the “Multi-Color Border” (Border 2) using the 1½” Fabric B squares and the 1½” x 2½” rectangles from Fabrics B, C, D, E and F. Press toward Fabric B.
7. Using Diagram 5 as a color placement guide, sew together two long side sections of the “Multi-Color Border” (Border 2) using the remaining 1½” x 2½” rectangles from Fabrics B, C, D, E and F. Press toward Fabric B.
DIAGRAM 2
DIAGRAM 3
DIAGRAM 4
DIAGRAM 5
C
C
D
F
D
E
E
E
F
D
F
C
C
D
F
E
E
D
F
D
C
C
C
D
F
F
E
E
Carnival Runner
3
windhamfabrics.com
WOF = Width of Fabric
8. Sew a long section of the “Multi-Color Border” (Border 2) to each side. Press toward Fabric B Border, as shown in Diagram 6.
9. Sew a short section of the “Multi-Color Border” (Border 2) to each end to complete Border 2. Press toward Fabric B Border, as shown in Diagram 6.
10. Using bias seams, sew the (3) 1½” x WOF Fabric B strips together for Border 3.
11. From the long strip made in Step 10, sub-cut the following:
(2) 1½” x 14½” strips and
(2) 1½” x 44½” strips
12. Sew a 44½” strip to each side for Border 3. Press toward Fabric B, as shown in Diagram 7.
13. Sew a 14½” strip to each end to complete Border 3. Press toward Fabric B, as shown in Diagram 7.
Finishing
14. With the backing fabric laying taut, place batting and then quilt top to form quilt sandwich.
15. Baste sandwich. Quilt as desired.
16. Using bias seams, sew the four 2½” x WOF Fabric A strips together to make the binding. Attach the binding using your preferred method to finish quilt project.
DIAGRAM 6
DIAGRAM 7
Carnival Runner
4
windhamfabrics.com
RUNNER DIAGRAM
