Upload
shark3
View
189
Download
4
Tags:
Embed Size (px)
DESCRIPTION
card model - Modelart Scale 1 32 GER Dornier DO17 P v GER 1
Citation preview
C 2001 E. ZARKOV MADE IN BULGARIA
Transparent canopyDetailed interiorRotatable propellers
DORNIER
Do-17 P
The proposed Dornier Do-17 P model is designedas a classic paper kit and is relatively easy to bebuild. Despite its relative simplicity, a specialattention and precision in the assembly procedure isrequired for achieving excellent results. Studycarefully the illustrative drawings, cutouts andpresent instruction before starting the work on themodel. Try to imagine the separate assemblyphases and the purpose of each detail.
After the acquaintance with the model, you may start the assemblage. Follow thesequence given in the instruction. Cut the necessary details shortly before usingthem in order to avoid possible mistakes. Score all fold lines before cutting thedetails. The places of scoring are marked with small thin lines on the continuation offold lines outside the parts.
Do not be in a hurry with gluing - carefully checkand shape the details until obtain the exact andcorrect fit. Before starting the work get hold ofthe necessary tools:
If you are happy enough with your finished model, why don’t you take few pictures of it and share them with ModelArt? You can contactus on the following email address: [email protected]
MASTERING Dornier Do-17 P
C 2001 E. ZARKOV
scissors, sharp modeling knife,blunt knife for scoring the fold lines,prickle, ruler, nippers
You can find detailed description of the model’sbuilding sequence in the assembly instructionsupplied with this kit
1/32 Scale Dornier Do-17 P
ASSEMBLY INSTRUCTION
The proposed Ju-Do-17 P model is comparatively complicated and with high level of similarity to the prototype. Thus, a special attention and precision in the assembly procedure is required.
Study carefully the illustrative drawings, cutouts and present instruction before starting the work on the model. Try to imagine the separate assembly phases and the purpose of each detail.
After the acquaintance with the model, you may start the assemblage. Follow the sequence given in the instruction. Cut the necessary details shortly before using them in order to avoid possible mistakes. Score all fold lines before cutting the details. The places of scoring are marked with small thin lines on the continuation of fold lines outside the parts. The scissors markings show where to make cuts on some details.
Do not be in a hurry with gluing - carefully check and shape the details until obtain the exact and correct fit. Before starting the work get hold of the necessary tools: scissors, sharp modeling knife, blunt knife for scoring the fold lines, prickle, ruler, nippers and grinding paper. Additional materials necessary for the assemblage are: 3 sheets of cardboard with thickness approximately 0.5 mm, a piece of wire with diameter 0.5 - 0.8 mm or pins, transparent foil for the canopy. Supply with proper glue. BISON Clear Adhesive, UHU or similar are recommended as the most appropriate ones. Waterbased glue is not recommended. The model can be built in two variants � with detailed interior and transparent canopy or with paper canopy. You must choose the variant before starting the work on the model. The details that are needed for paper nontransparent canopy are marked with italic style numbers.
Preparation for assembling includes gluing the pages that contain the formers and strengthening elements on 0.5 mm cardboard.
Start with the nose section. Carefully form parts 1 and 1d as it is shown on view A of the instruction. Add to the obtained fuselage segment the formers 1b, 1c, 1g and 1h. Then carefully shape part 2, and don�t forget to cut marked with a scissor symbol lines that as you�ll convince yourself later are vital for obtaining correct shape and precise joint with the canopy.
Now you can focus your attention to the interior. Assembly and glue on their places the pilots and gunner�s seats, controls and instrument boxes as it is shown on view E and complete the nose section.
Assembly all reinforcing elements of the central fuselage section, wings and tail. Then switch again to the small details mode and assemble the machine guns and cockpit glassing. Glue the central section and pilots cockpit to the fuselage nose as it is shown on view K. Switch back to macro
details mode, but with the same accuracy assembly the tail sections of fuselage, wings and the joynt cowlings between them. Finish view M execution with gluing the tail.
Prepare the engines gondolas /view N/ and again switch to precise parts mode.
Assembly the undercarriage. Note that two main wheels construction is equal and is not mirror symmetrical. After gluing the disks 56 � 56f to each other leave some time for drying the glue and then form the shape of the wheel tires by using sandpaper and then paint them in black, In a same way make the tail wheel 67.
One of the most pleasant works on the model is assembling the engines, as it is shown on view P. Just follow the part numbering sequence in the instruction.
When the engines are ready assembly their cowlings. Glue the parts 76b and 77b inside on the rear side of cowlings 76 and 77 to achieve correct positioning of the engines P inside them. Form carefully and glue the cowlings front sections 78 � 85.
Then assembly the propellers. They must be capable to rotate free in their bearings 92, 93.
When the preparation of all these subassemblies is over, glue the engine gondolas, undercarriage and propellers to the model.
Finish the model, placing the rear gunner glassing, Pitot tube and antennas.
Now your model is ready. You can switch to enjoy mode.
20
20e
18
17
16 19
3
8
7
7a
8a
66a
3a
9
12
9a11
5
19
10
13
15
144
2
1
1/32 scale Do-17 P page 1
C 2001 E. ZARKOV
20
20e
18
17
16 19
3
8
7
7a
8a
66a
3a
9
12
9a11
5
19
10
13
15
144
2
1
1/32 scale Do-17 P page 1
C 2001 E. ZARKOV
32
31
1d
25
26
24
96a
96b96
97a 9730
29
23
22
21
1/32 scale Do-17 P page 2
C 2001 E. ZARKOV
98
33
34
99 99a
28a
28
36
68b68
67d
94a
94
94b
35
69
1/32 scale Do-17 P page 3
C 2001 E. ZARKOV
33
34
99 99a
28a
28
36
68b68
67d
94a
94
94b
35
69
1/32 scale Do-17 P page 3
C 2001 E. ZARKOV
1/32 scale Do-17 P page 4
C 2001 E. ZARKOV
100
46
47
50
51
1/32 scale Do-17 P page 4
C 2001 E. ZARKOV
100
46
47
50
51
1/32 scale Do-17 P page 4
C 2001 E. ZARKOV
100
46
47
50
51
1/32 scale Do-17 P page 5
C 2001 E. ZARKOV
For spare parts
For spare parts
41
42
1/32 scale Do-17 P page 5
C 2001 E. ZARKOV
For spare parts
For spare parts
41
42
43b
43
40
1/32 scale Do-17 P page 6
C 2001 E. ZARKOV
43b
43
40
1/32 scale Do-17 P page 6
C 2001 E. ZARKOV
1/32 scale Do-17 P page 7
C 2001 E. ZARKOV
39
44b
44
95
95a
1/32 scale Do-17 P page 7
C 2001 E. ZARKOV
39
44b
44
95
95a
1/32 scale Do-17 P page 8
C 2001 E. ZARKOV
75
76
93
76d
75e
53c
71a
52
89
90
91
77
77b
71
81
8283
85
53
74
1/32 scale Do-17 P page 8
C 2001 E. ZARKOV
75
76
93
76d
75e
53c
71a
52
89
90
91
77
77b
71
81
8283
85
53
74
1/32 scale Do-17 P page 9
C 2001 E. ZARKOV
54
70
72
73
92
73d
72e
55c
55
86
87
8876b
78
79
80
84
70a
76
74
1/32 scale Do-17 P page 9
C 2001 E. ZARKOV
54
70
72
73
92
73d
72e
55c
55
86
87
8876b
78
79
80
84
70a
76
74
1/32 scale Do-17 P page 10
C 2001 E. ZARKOV
65d
66d
59 60
59a
57a
59b
57b
59c
57c
59d
57d
60a
58a
60b
58b
60c
58c
60d
58d
64a
64b
64c
64d
66
56g
62a
62b
62c
62d
65
64
63
62
61
56g
76c 76d
77c 77d
72d
72d
75d
75d
101101a 102103 103a
1/32 scale Do-17 P page 11
C 2001 E. ZARKOV
56 56 56 56
56a 56a 56a 56a
56b56b 56b 56b
56c 56c
56c
56c
56d 56d
56d
56d
GLUE THIS PAGE ON 0.5 MM CARD
1g
16d
27d
2b
4c33b
34b35c
35d
27b
27c
5a1h
1b
1c
29b 30b
1/32 scale Do-17 P page 12
C 2001 E. ZARKOV GLUE THIS PAGE ON 0.5 MM CARD
4538
38d 37d37
27
38a38b
38c
45a
45b 45c
27a
37a
37b 37c
38e 38f 37f 37e
48
48a 49
49a
GLUE THIS PAGE ON 0.5 MM CARD
56e
56e
56e
56e
67c
67c
67b
67b
67a
67a
67
67
56f
56f
54e
54f 54h
54g
55b72f
73e
93d
73b 73c 93c 86h
72b 72c 93h
86c87b
52g52h
52f 52e
75f53b
90b 89c
92b
76b 76c
92c 75b 75c
92d
75e
1/32 scale Do-17 P page 13
C 2001 E. ZARKOV
20b
29d
20c
43a
44a
41b
42b
33a
34a
1a
36a 35a
35b
4b
4a
16a 16b
16c
24c
24b
1e
1f
26a
25a
22a
21a
30a
32a 31a
29a
23a
24a
2a
1/32 scale Do-17 P page 14
C 2001 E. ZARKOV
14a
1/32 scale Do-17 P page 15
C 2001 E. ZARKOV
40b
39b
54b89a
90a
91a
54d54c
54a77a
52d
80a 79a78a
55a 75a
76a
93a53a
74a
81a
82a 83a 88a
87a
86a
52c
52d
72a
73a
92a
52b
52a76a
42a
40a
51a
50a
47a46a
46b41a
39a
68a
65a
66a
65b
66b
65c
66c
1/32 scale Do-17 P page 16
1/32 scale Do-17 P page 16
1/32 scale Do-17 P page 16
1/32 scale Do-17 P page 16
C 2001 E. ZARKOV
C 2001 E. ZARKOV
C 2001 E. ZARKOV
C 2001 E. ZARKOV
16ta 16ta
16ta16ta
16t 16t
16t16t
28t 28t
28t28t
15t 15t
15t15t
14t 14t
14t14t
4t 4t
4t4t
18t 18t
18t18t
24t 24t
24t24t
1t 1t
1t1t
19t 19t
19t19t
17t 17t
17t17t
C 2001 E. ZARKOV
1/32 scale Do-17 P Assembly Instruction page 1
A
CB
D
E
F
1
1a
1e
1t
1d
1f
2b 2a 2
1h A 1b
1c 1g
4c 4t 4 - 4b 5 B
101a 101 103a 103 101a
102
28 28t
8a
6
6a
13
11 12 10 7 7a 3 3a
8 9a 9
E 15t 15 14t 14, 14a C
1/32 scale Do-17 P Assembly Instruction page 2
C 2001 E. ZARKOV
G H
K
I
J
27a 27b 27 27c48 48a 45c 45a 45 45b 49a 49
38c 38 38d 38b 38a 37a 37 37b 37d 37c
18 18t 17 17t 19 19t
D
D 16ta 16t 16 - 16c 16d
J 22a 22 23 23a
21 21a 17d G
F
24b
24
24a
26a 26
25a 25 24c
C 2001 E. ZARKOV
1/32 scale Do-17 P Assembly Instruction page 3
M
L
32 32a 30b
F 30 30a 29 29a 31 31a 37e 37f I
I 38e 38f 33 33a 33b 34a 34 34b
35a 68 68a 35 35b
35d 35c 36a 36
29b
51, 51a
46, 46a, 46b 47, 47a 50, 50a
69
43 - 43b 42 - 42b 40 - 40b
L
39 - 39b 41 - 41b 44 - 44b
C 2001 E. ZARKOV
1/32 scale Do-17 P Assembly Instruction page 4
N
O
P
R
Q
55c 55 - 55b 71, 71a 54 - 54h
53b 53c 53, 53a 52e 52g 70 70a
52h
52f
52, 52b52a
59 - 59d 63 60 - 60d 64 - 64d
57a615757b57c57d65-65c65dpin
58-58c
58d pin
56-56j
68b67-67d
76-76e 74 75-75f
73e 73d 74 72e
73b 73,73a 73c 72b 72,72a
72d 72c 72f
76-76d78,78a79,79a80,80a84,84a
E
85 85a 83, 83a
82a 82 81a 81 77a 77,77b
77c77b
E
94-94b89-89c90-90b91,91a
93-93d pin
88,88a 87b 87a 87 86b 86
86a 94b
94,94a
86c pin 92c
92a 92 92b
92d
C2001
E.Z
AR
KO
V
1/3
2scale
Do-1
7P
Assem
bly
Instru
ctio
npage
5
S
97 J 96a 96b 96
100
98
R Q O N 95a 95 L
91 91a