Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
P-70B Min. 5/8” Max. 2.75” Capacity
P-100B Min. 3/4” Max. 4” Capacity
P-150B Min. 2-3/4” Max. 6” Capacity
Carbide Circular
Sawing Systems
Carbide Circular Saws
• Servo Driven Automatic Bar Feed
• Hydraulic Vise Clamping (side & vertical vises)
• Floating Bar Feed Vise
• Servo Drive & Precision Ball Screw Feed
• Hydraulic Sorting Chute
• Inverter Control Blade Speeds
• Automatic Loading Table
• Electro-magnetic Blade Brake
• 4 Carbide Blade Guides
• Air Filter
• Automatic Chip Conveyor
• Mist Type Coolant System
• Automatic trim cut separation
Standard Features Include
• Allows for fully automatic
operation
• Can be set for continuous
operation or just one bar
• Material is lifted onto the shuttle
table one by one
• Trim cut is made automatically
• Remnant is ejected
automatically
• Adjustable ramp settings
• Continuous operation increases
productivity
Automatic Loading Table
Loading Table Capacities
Weight Capacity
P-70B 8,200 lbs.
P-100B 8,200 lbs.
P-150B 11,000 lbs.
Shuttle Pulling Capacity
P-70B 1,210 lbs.
P-100B 1,320 lbs.
P-150B 2,750 lbs.
• The saw blade is controlled by a Mitsubishi servo in conjunction with a
precision ball screw.
• Precision blade control provides
• Vibration free cutting
• Optimum cycle time
• Surface finish of 64 RMS
• Minimal burr
• Saw blade is driven through a heavy duty transmission
• Blade speeds are controlled through an inverter
Blade Feed System
P70B P100B & P150B
• The blade drive
transmission is cooled by an
oil bath lubrication system.
• The electro-magnetic
powdered metal blade brake
compensates for
transmission gear backlash
which reduces vibration and
prevents blade damage,
ensuring smoother cuts and
longer blade life
Blade Drive & Brake
• Four carbide blade guides
• Thin body carbide blades
• Minimal kerf loss
• Mist Type Coolant System
• Powered blade brush
• Automatic Chip Removal
System
Carbide Blade Guides
• The Automatic Bar Feed is
powered by an AC servo motor and
precision ball screw
• Hydraulic floating vise jaws
accommodate crooked stock
• Sensors detect the bar end and
signal the automatic loader
• Rollers both support and provide
ease of material movement
• Blade Saver Feature - at the end of
each cut the bar feed vise retracts
the material preventing the blade
from contacting the material as the
head returns
• Remnants can be as Little as 3.4”
Automatic Bar Feed System
• Hydraulically operated
• Clamping the material on
three sides
• Two Machine vise clamps
and one machine vertical
clamp
• The position of the vise
jaws automatically set the
start and return limits of the
blade
P150B shown with optional remnant reducing vise.
Vise Clamping
• User friendly touch screen control.
• Storage for up to 9 different jobs.
• Storage for up to 21 different material types with pre-
programmed blade speeds and cutting rates.
• The self-diagnostic feature monitors 18 separate saw
functions
• Amp meter can be set to automatically stop job when
blade wear is detected.
• From the Touch Screen the Operator Can Set
• Shape and Size of the Work Piece
• Blade Speed in RPM
• Chip load
• Trim Cut Length
• Cut Length
• Job Quantities
Touch Screen Control
The large capacity Air Filter is standard equipment on all models
and filters the vapors from the mist lubrication system keeping
the environment around the saw clean
Air Filter
• Hydraulically controlled sorting chute automatically
separates trims and remnants from finished parts.
Hydraulic Discharge Chute
Optional Roller Chain Loader
Optional Roller Chain Loading Tables
are available in place of the standard
gravity feed loading tables.
These powered loading tables are
used for loading squares, rectangles
and other non-round shapes.
Optional Remnant Reducing Vice
Note: Some covers and guards may have been removed for illustration purposes.
Model P-70B P-100B P-150B
Capacity
Min: .50”
Max: 2.75”
Min: .75”
Max: 4”
Min: 2.75”
Max: 6”
Min: .625”
Max: 2”
Min: .75”
Max: 3.125”
Min: 2.75”
Max: 4.375”
Motor
Blade Drive 10 HP 15HP 20HP
Hydraulic Pump 2HP 3HP 5HP
Saw Blade (T=Kerf t=Thickness) Ø285 x T2.0 x 1.75t
mm
Ø360 x T2.6 x 2.25t mm Ø460 x T2.7 x 2.25t mm
Blade Feed Servo Motor and Ball Screw
Blade Speed 30-150 RPM 30-130 RPM 30-130 RPM
Load Table 47.2” x 204.7
Bar Feed AC Servo Motor and Ball Screw
Automatic Feed Length Single Feed 3/8”-24” / Multiple Feed 118” Single Feed 3/8”-27.5”/Multiple
Feed 118”
Automatic Chip Conveyor Chain Type
Cooling Air Compressed Oil Mist
Tank
Capacity
29”L 32”L 35”L
4L
Machine Weight 5060 lbs. 6160 lbs. 7700lbs.
Floor
Space
(“)
Machine 79” W x 68-1/2” L 114” W x 68-1/2” L 122” W x 82” L
With 5M
Load Table 79” W x 269” L 114” W x 269” L 122” W x 282-1/2” L