CAPABILITY 17/18 - Triaxial Consultingtriaxial.com.au/wp-content/uploads/2018/11/Triaxial-Capability_17-18... · 3. Triaxial is a fresh and dynamic engineering consulting company,

1

C A PA B I L I T Y 1 7 / 1 8

2

3

Triaxial is a fresh and dynamic engineering consulting

company, which delivers client specific, practical

solutions to resolve complex problems, and put our

customers minds’ at peace with better than expected

outcomes.

The firm was established in 2012 and founded on a

cumulative 75 years of industry experience. Since these

humble beginnings, the business has sustained a healthy

organic growth which can be directly attributed to the

prompt, personalised and professional service afforded

to all our clients.

In 2015, Triaxial Consulting was recognised by BRW on

its Fast Starters list, which features the top 100 fastest

growing companies in Australia. The following year

Triaxial Consulting featured in BRW’s fastest growing

companies in Australia, rivalling not only start-up

businesses, but all businesses Australia-wide

The variety of expertise Triaxial Consulting provides the

Property, Construction and Mining Industries includes:

Structural Engineering

Strata & Remedial Services

Civil Engineering

Innovation

Specialist Services

Project Management3

2015

4

O U R V I S I O N

O U R M I S S I O N

O U RVA L U E SO U RC U L T U R E

To be at the forefront of professional consultancies

providing service exceeding client expectation

To be nationally recognised as a leader in quality

consulting

Communication

Trust & Respect

Professionalism

Fairness & Equality

Innovation

To encourage staff to act with honesty and integrity in all

business relationships

To apply technical innovation practically, commercially

and sustainably

To be responsive to client requirements and timeframes

Triaxial Consulting is a fresh & dynamic engineering

consulting company, which delivers client specific,

practical solutions to resolve complex problems, and

put our customers minds’ at peace with better than

expected outcomes.

5

Key Services 6Key Personnel 15Track Record: Structural 30 Industrial 32 Light Industrial 34 Commercial 36 Retail 38 Community 40 Institutional 42 Residential 43 Winery 44 Materials Handling 46Track Record: Strata & Remedial 48 Remedial 50 Rehabilitation 51 Rope Access & Confined Space 52Track Record: Civil 56 Masterplanning 58 Infrastructure 59 Stormwater & Bulk Earthwork 60 Flood Modelling 62Track Record: Project Management 64 Cemeteries 66Track Record: Specialist Services 72 Legal 74 Heritage 76 Forensic Engineering & 78 Emergency Response Insurance 80Track Record: Innovation 82Quality Assurance 88Occupational Health & Safety 89Risk Management 90Environmental Management 91Our Locations & Contact 93

6


Strata & Remedial Services

Civil Engineering

Innovation

Specialist Services

Project Management

Key Services

7

“”

“Our team of professionals possess the requisite analytical

and practical expertise to ensure each and every project

incorporates the most economical, buildable and

sustainable solutions.”

7

8


The Triaxial Consulting Structural team are renowned

for technical innovation and offer structural designs

specifically tailored to achieve project outcomes and

exceed client expectations.

Our professionals are highly qualified and experienced,

and are committed to continuing their professional

development through regular technical training.

Our team of professionals possess high level analytical

and practical expertise to ensure each and every project

incorporates the most economical, buildable and

sustainable solutions..

KEY SERVICES

9

Strata &Remedial Services

The Triaxial Consulting forensic investigation,

rehabilitation, strata and remedial team provide a

full suite of services to the infrastructure, property

management, insurance and legal industries.

Our highly skilled and experienced professionals have an

in-depth knowledge of engineering design, construction

processes and the latest technologies in conjunction

with a comprehensive understanding of a wide variety of

industries and associated legislation. With staff trained in

both confined space and rope access, there is no project

beyond our reach.

Our professionals understand the complexity underlying

aged buildings and modern construction technologies

and utilise this knowledge to provide clients with an

innovative solution which is cost effective yet energy

efficient and environmentally responsible.

Our team work closely with insurance assessors,

project/asset managers, lawyers, strata

managers, unit owners, tenants and

remedial contractors on a daily

basis and strive to ensure correct

communication, minimum

disruption and cost-effective

solutions are achieved on

each project.

KEY SERVICES

10

KEY SERVICES

Civil Engineering

The Triaxial Consulting Civil team represent the

collaboration of knowledge and experience acquired

over decades of engineering consultancy practice, the

result of which is the provision of designs incorporating

the most efficient and sustainable use of land.

Our professionals are highly qualified, experienced,

and employ the use of the latest computer modelling

and design software available to ensure competitive,

practical, sustainable and innovative design solutions.

This minimises our client’s costs whilst being ecologically

sensitive.

Our highly motivated staff are committed to continuing

their professional development through regular technical

training, to keep abreast of the latest industry solutions

and innovations.

Triaxial Consulting provides a full suite of civil engineering

services to a wide range of industries and clients,

Australia wide.

11

KEY SERVICES

The Triaxial Consulting project management team

understand that each project is unique and therefore

requires an innovative tailored project management

solution including resources with the skills and

expertise to ensure project delivery is on time, on

budget and to the highest quality.

Our project management teams set the strategy,

communication lines and a framework of controls

that can be applied to the entire construction process.

While the provision and structure of this service varies

depending on client needs and project requirements, the

quality of our service remains the same.

Our highly experienced and highly qualified professionals

have the ability to manage projects of any size, to a wide

range of clients and almost anywhere in the country.

We draw on our experienced staff to review the big

picture and be able to identify critical paths and ensure

the delivery of projects in a logical sequence and order of

priorities, on time and on budget.

PROJECT MANAGEMENT AT

ROOKWOOD NECROPOLISTriaxial Consulting has been an integral part of the 5 year

capitol works upgrade program ensuring the delivery of

new and upgraded infrastructure to ensure the safe and

viable operation of Rookwood Necropolis as Australia’s

largest and most historical cemetery meeting the

demands of a modern multi-cultural society into the

future.

Working with the cemetery management team, Triaxial

Consulting identified areas within the cemetery that were

in dire need of upgrading or replacement.

Considering the cemetery has been operating continuously

since 1867, there were many areas requiring attention.

Not only roads and drainage, but areas such as compliant

access to the latest NCC requirements and traffic

management had to be upgraded.

Triaxial Consulting has been given the task of a complete

delivery service of such projects from initial design

documentation to completion. Acting as engineering

consultants, project managers and project super

intendents we managed the whole process on behalf

of Rookwood Necropolis and it’s various stakeholders.

Ensuring engineering compliance, probity during

the tender process, economical construction within

timeframes set out by Rookwood Necropolish and project

co-ordination of all other consultants and contractors.

Project Management

12

SpecialistServices

KEY SERVICES

Within the Triaxial Consulting Specialist Services team,

we have a dedicated team of experienced professionals

who service the insurance, legal, heritage, emergency &

disaster response industries.

Our professionals are highly qualified and experienced,

are committed to continuing their professional

development through regular technical training, and are

confined space and rope access qualified.

Our team has successfully completed many complex

specialist services projects, both internationally and

Australia wide.

Our team is always on call, and available to assist when

ever and where ever required.

13

Within the Triaxial Consulting Innovation team, we

have a dedicated team of experienced and highly

qualified professionals who service a wide range

of industries, including once off clients who have a

project or task specific requirement.

We are frequently engaged to provide solutions to

unorthodox, unconventional and complex

projects.

Our Innovation team are widely renown for our innovative

ideas and ability to implement successful solutions and

outcomes by thinking outside the box, whilst providing

economic and buildable solutions.

KEY SERVICES

Innovation

14

Triaxial Consulting are aware and believe that our

people are our best asset. We exist on the premise

“your people are your business” and for this reason we

aim to train, develop and procure the best people the

industry has to offer.

The Triaxial senior management team are no exception

to this rule and offer un-paralleled expertise in their

individual fields.

The following staff represent the Directors and senior

management team.

Key Personnel

15

16

Daniel CullyDirector

[email protected]

0420 394 155

Daniel has gained extensive experience in structural

and civil engineering design and management since

he began his consulting career in Ireland. Prior to

embarking on his consulting career, Daniel worked

as a carpenter, steel fixer, leading hand and project

manager on various pharmaceutical, residential,

commercial and sewerage treatment construction

projects in Ireland.

Upon graduation, Daniel took up a role as a structural

and civil engineer with a mid-tier firm in Ireland before

immigrating to Australia where he accepted a position as

a Structural Design Engineer with a Sydney based post

tensioning firm. Daniel then accepted a role as a

Structural Design Engineer with a mid-tier Sydney based

consulting firm where he built on his already extensive

technical and project management skills through the

execution of structural, remedial and rehabilitation

projects.

Daniel is a chartered structural engineer with experience

including structural design, forensic investigations,

consulting and project management, remedial

investigation and expert witness services, along with the

management and mentoring of junior engineers.

As one of the firms founding directors, Daniel now shares

his knowledge and experience through staff mentoring

and management ensuring all clients receive the quality

of service expected from Triaxial Consulting.

TECHNICAL SKILLSCivil / Structural Design

Structural design of reinforced, and post tensioned

concrete, precast concrete, structural steel, masonry,

and timber structures/ analysis software and AutoCAD

drafting software.

Forensic/ Residential/ Strata /Remedial / Innovation

Innovation, technical investigations, reporting and

expert witness services for the insurance and legal

industries, forensic investigations, diagnostics and

remedial solutions, preparation of repair specifications,

tender documents / construction documents, contract

execution, project supervision, project management and

innovation design

and development.

Confined Space / Rope Access

Structural surveys of building facades / structures and

confined spaces, preparation of condition reports,

remedial specifications, tender documents / construction

documents, contract execution, project management

,anchor certification and anchor system design.

Diploma of Engineering (Civil) - Hons

Bachelor of Engineering (Structural) - Hons

Master of Engineering Studies (Civil & Structural) - Hons

MIEAust CPENG NER RPEQ

Registered Building Practioner - Victoria

Level 1 Rope Access & Confined Space Trained

KEY PERSONNEL

17

Structural Engineering Certificate

AutoCAD Training Certificate

Associate Professional Certificate - Safety in Design

OHS Construction Induction Certificate

RISI Rail Industry Safety Induction

RMS Red Card

Confined Space Trained

Jeffrey KnoxDirector

[email protected]

0403 154 871

Jeff has gained experience in structural and civil

engineering design and management over the last 30

years.

During his extensive career, Jeff has worked with a range

of consultancies from small to multi-national as well as

educating the next generation of young professionals

through his lecturing work with Sydney Institute of TAFE -

Civil Engineering faculty.

The variety of firms in which Jeff has been associated

has afforded him the opportunity to work on an

incredibly diverse range of projects, from the most

basic of domestic construction to some of the world’s

largest infrastructure and high rise projects. Some of

these projects included the bicentennial development

of Sydney’s Darling Harbour, the Sydney Harbour Tunnel

and the 110 storey Bond Tower. Jeff’s international

experience includes the Western Harbour Crossing

Tunnel located in Hong Kong where he worked on

secondment.

Jeff has been involved in the use and development of

CAD systems for over 20 years with particular expertise in

AutoCAD systems and management.

As one of the firms founding directors, Jeff now shares his

knowledge and experience through staff mentoring and

management ensuring all clients receive the quality of

service expected from Triaxial Consulting.

TECHNICAL SKILLSStructural

Reinforced and precast concrete, structural steel, clay and

concrete masonry, timber framing, presentation drawings

for proposals, shop detail checking.

Civil

Stormwater drainage, earthworks, bridges, civil structures,

finished surface profiles, road design (horizontal

alignment, vertical alignment and cross sections).

Document & Project Management

Management of project documentation, management

and review of tenders, contract administration,

management of CAD systems, resource allocation and

staff supervision.

KEY PERSONNEL

18

Drew RobertsDirector

[email protected]

0409 359 016

Drew commenced his structural engineering and

project management career in 2004 when, following

graduation he gained employment with a multi-

national consultancy in their regional Darwin office.

Here Drew’s engineering ‘apprenticeship’ saw him

designing hangars, administration buildings, residential

quarters and simulator buildings for a large defence

project at Robertson Barracks located in Darwin.

Drew further developed his design and project

management skills whilst employed by an Adelaide

based design and construction business where he

mastered the design of Pre-Engineered Buildings (PEB’s),

mining and agricultural structures and storage facilities.

During his tenure with a mid-tier Sydney based

consulting firm Drew took the opportunity to broaden his

skills base adding engineering assessment and reporting

expertise.

As one of the firms founding directors, Drew now shares

his knowledge and experience through staff mentoring

and management ensuring all clients receive the quality

of service expected from Triaxial Consulting.


Design of reinforced and precast concrete, structural

steel, Pre-Engineered Buildings (PEB), clay and concrete

masonry and timber framing.

Structural software including Metal Building Software

(MBS) for the design and detailing of steel framed

structures, Space Gass and Microstran engineering design

analysis software, AutoCAD drafting software, Inducta

Engineering (RC Slabs) reinforced concrete design

software, RAPT concrete design analysis software.

Reporting & Project Management

Procurement and technical specifications (structural

steel), estimating and quoting, D&C projects, contract

administration, forensic investigations, technical

reporting.

Bachelor of Civil and Construction Engineering

MIEAust

Registered Building Practitioner NT

(Certifying Structural Engineer)

KEY PERSONNEL

19

James BlackburnStructural

[email protected]

0408 401 602

Bachelor of Engineering (Civil - Structural)

Master of Engineering Studies (Civil and Structural) Ongoing

GradIEAust

Green Building Council Australia (GBCA)

James began his engineering career with a mid-tier

Sydney based consultancy where he was initially

employed as an undergraduate engineer whilst

completing his degree.

On graduation, James was retained by the firm and

assumed the role of design engineer where he quickly

gained valuable experience in the design and detailing

of structures which complemented his academic major

in concrete-steel composite structures. The diversity

of projects with which he was involved led to James’

exposure to geotechnical design, enabling him to

develop and hone his skills in the design of a wide range

of site retention and retaining structures including large

cantilevered and anchored pile walls.

To follow the growing sustainability trend in the

construction industry, James completed an accredited

qualification through the Green Building Council

Australia and has worked on various developments as a

Green Star consultant which have achieved up to a 5 -

star Green Star rating.

Joining the Triaxial team, James brings with him

knowledge and experience in the structural design and

management of residential, industrial, commercial, retail

and institutional projects which will only be enhanced on

completion of his Masters of Engineering qualification.

TECHNICAL SKILLSStructural Design

Design and detailing of reinforced, post tensioned

and precast concrete, structural steel, concrete-steel

composites, masonry, and timber structures.

Structural modelling and analysis using Microstan,

ANSYS, Inducta (RC Building and Slabs), Visual Basic and

MatLab.

Geotechnical Design

Geotechnical modelling and analysis using Wallap, FEAR

and X-Slope.

Forensic/ Residential/ Strata /Remedial

Technical investigations / reporting and expert witness

services for the insurance and legal industries, forensic

investigations, diagnostics and remedial solutions,

preparation of repair specifications, tender documents

/ construction documents, contract execution, project

supervision, and project management.

KEY PERSONNEL

20

JimDisherCivil

[email protected]

0457 776 512

Jim has gained a wealth of experience in civil and

structural engineering, having undertaken a variety

of roles he regularly works collaboratively with a

wide range of professionals including town planners,

surveyors, architects, environmental scientists, as well

as engineers from all building disciplines.

During his extensive career, Jeff has worked withStarting

as a graduate engineer with a mid-tier consultancy

based in Sydney, Jim developed skills in structural design,

remedial investigation / reporting and rope access

inspections on a wide variety of residential, commercial

and industrial projects. Following this role, Jim accepted

a role as a design engineer in the Local Government

sector where he developed skills in project management,

civil design and traffic engineering whilst working on

a variety of municipal projects. A subsequent move to

Mudgee in central west NSW led to acceptance of a

position with a consulting engineering and surveying

firm. Here Jim was able work on a range of projects

from small residential civil and structural jobs to large

residential and industrial subdivisions.

Joining Triaxial consulting as the Mudgee Office manager

has allowed Jim to offer a high standard of engineering

services to rural clients in central west NSW, as well as

providing ongoing civil engineering services to Triaxial

clients nationwide.

TECHNICAL SKILLSCivil / Structural Design

Civil design from pre-DA stage through to construction

sign-off and certification. Urban and rural road and

pavement design, earthworks, stormwater drainage,

reticulated sewer networks, water quality and

treatment, survey set out, construction supervision and

management, preparation of tender documents and

superintending of civil projects.

Structural design including reinforced concrete,

structural steelwork, masonry and timber framing.

Investigation, Reporting and Project Management

Investigations and reporting including building defect

reports, dilapidation surveys, flood impact reports and

project management.

Traffic Engineering

Traffic engineering analysis and preparation of traffic

impact statements for developments including

residential and industrial subdivisions at Rezoning and

Development Application stage, swept path analysis for

building design, traffic control plans for construction

projects and special events.

KEY PERSONNEL

Bachelor of Engineering (Civil)

Master of Engineering Studies (Civil and Structural)

MIEAust

OHS Construction Induction Certificate

RMS Red Card

Level 1 Rope Access & Confined Space Training

21

Daniel VydenStructural

[email protected]

0488 101 103

Daniel is a Chartered Engineer with over ten years

of experience in Structural Design and five years

as the structural department manager with a mid-

tier Adelaide based consultancy. Daniel has worked

autonomously, as part of a team as well as team leader

on many structural design projects including residential,

industrial, commercial, retail and institutional projects

nationwide.

As a result of his role in a combined engineering and

building design office, Daniel was able to broaden his

knowledge of building development to include the

architectural scope of works, their involvement in the

development process and more importantly, an insight

and experience in the detailing and approval processes

involved in building projects.

Prior to the commencement of his engineering career,

Daniel worked on many residential building sites

providing him with a greater understanding of current

construction methodologies and invaluable experience

working on structures from a ‘real life’ prospective.

Joining Triaxial consulting as the Adelaide Office

manager has allowed Daniel to offer a high standard of

engineering services to South Australian clients, as well

as providing ongoing civil engineering services to Triaxial

clients nationwide.


Strong technical knowledge and experienced in the

structural design of residential, industrial, commercial,

retail and institutional projects.

Design of reinforced, post tensioned and precast

concrete, structural steel, masonry and timber structures.

Civil Design

Strong technical knowledge and experience in the

design of bulk earthworks, pavement and stormwater

drainage.

Engineering Project Management

Management of civil and structural engineering and

building design documentation

Management of engineering teams and document

control processes

Preparation of tender documentation

On-site inspections of structural and civil works

Chartered Member of Engineers Australia

Bachelor of Civil and Water Engineering - Hons

MIEAust

CPENG

NER

RPEQ

KEY PERSONNEL

22

Úna McKennaDesign Engineer

[email protected]

BSC Hons Transportation with Specialisms – Hons

Diploma in industrial Studies

OHS Construction Induction Training Certificate


Úna graduated in 2008 with a Bachelor of Science

degree in Transport with Specialisms from the

University of Ulster in Northern Ireland. Upon

graduation Úna commenced working in a top tier Civil

and Structural consultancy, Mouchel Pty Ltd as a site

engineer on the largest road upgrade in Northern Ireland

in over 40 years. Úna’s role as a site engineer involved

supervising and monitoring all construction activity

on the 27Km long Design, Build, Finance and Operate

Corridor Improvement Project.

In 2010 Úna immigrated to Australia and joined the

team at Structural Systems based in Sydney as a Project

Engineer. Whilst in this role Úna gained invaluable

experience in co-ordinating on-site activities of post

tensioning and structural reinforcement, managing

sub-contractors, dealing with design/scheduling issues,

cost control, ordering and programming relevant site

materials for interstate projects. Úna also developed her

experience in remedial projects with Structural Systems

through project managing various remedial and heritage

projects within Sydney with regard to budget, materials,

labour and critical path analysis. In 2012 Úna joined the

team at a medium sized Civil and Structural Consultancy

based in Sydney. She developed her experience as a

Design Engineer in a wide range of areas including

Civil design and documentation, residential alterations,

building inspections and reporting, legal building defect

reports, insurance reports, technical investigations,

dilapidation surveys and remedial solutions on various

building defects and providing the documentation

required including the preparation of specifications,

tender submissions, contract execution, project

supervision and project management. Since September

2015 Úna has moved onto Triaxial Consulting Pty Ltd to

expand her design, forensic and diagnostic engineering

and project management skills. Her experience to

date will ensure a high level of service to her clients is

provided.


Reinforced concrete (pre-cast and post tensioned),

structural steel, masonry.

Civil Design

Residential and commercial stormwater drainage design,

civil structures.

Strata / Remedial / Insurance Reporting / Diagnostic

and Forensic Engineering / Project Management

Technical investigations and reporting, condition

reports, dilapidation surveys, remedial specifications,

formulating and ,reading of tender and contract

documents, development application preparation,

project and contract management.

KEY PERSONNEL

23

ScottBentleyDesign Engineer

[email protected]

Scott completed his civil and structural engineering

degree in 2014. He was an outstanding student

achieving distinctions and high distinctions in all

subjects, consequently receiving First Class Honors.

He was employed as a tutor for the University of Adelaide

in Structural Engineering Design and Concrete Analysis.

Scott has previously worked for a mid-tier Adelaide based

consultancy, obtaining experience working on, and

leading a large variety of engineering projects including

residential, industrial, commercial and high-rise projects.

He worked effectively in a diverse team and became

familiar with the Australian Standards and Codes for

design.

Having grown up in his family business, Bentley’s Building

Supplies in regional SA, Scott has had the opportunity to

gain invaluable experience within the building industry in

the form of estimating, administration and the operation

of heavy machinery. During this time Scott was also

exposed to various residential, commercial and industrial

projects along with the construction of residential

dwellings.


Structural design and detailing in steel, concrete-steel

composites, reinforced concrete, masonry and timber.

Experience in industrial, commercial, multistorey

and residential. Experience in project management.

Multistorey modelling and design in ETABS. Modelling,

analysis and design in SpaceGass/Microstran.

Bachelor of Engineering (Civil-Structural) – First Class Hons

Adelaide Young Professionals Committee

Member of the Institute of Engineers (MIEAust)

KEY PERSONNEL

24

SamNajiSenior Engineer

[email protected]

Sam is a senior Structural Engineer with Structural

with over 15 years’ experience in Structural and Civil

design, in Australia, New Zealand.

Sam has been involved in the engineering design,

design co-ordination, construction, supervision and

documentation of a variety of complex multidiscipline

project types including residential, warehousing,

industrial minerals processing, power transmission

and substation, low to mid rise residential, commercial

projects as well as infrastructure’s projects such as water

and waste water treatment plant and pump station

projects.

Sam’s particular expertise is in the design of complex

structural steel structures for which he has extensively

used computer aided design 3-D modelling in addition

to modelling reinforced concrete structures.

TECHNICAL SKILLSCivil / Structural

Extensive experience in structural analysis and design

and good attention to details Hands on approach

has ensured up to date knowledge of design and

construction practices Successfully completed numerous

projects both as designer and design team leader

Reinforced concrete, structural steel, precast, masonry,

and timber structural design. Modelling and analysis in

Microstarn, Strand7, RC Slabs & RC Builgings.

Residential/ Strata /Remedial

Technical investigations / reporting, diagnostics and

remedial solutions, preparation of specifications, tender

documents / construction documents.

BSc (Structural Engineering)

Post Grad. Diploma in Structural engineering

MIE Aust, Chartered Professional Engineer (NER)

Registered Professional Engineer Queensland (RPEQ)

M–IPENZ (The Institution of Professional Engineers New Zealand)

KEY PERSONNEL

25

JasonSearleSenior Civil Designer

[email protected]

Jason is a Senior Civil Designer with more than 9

years of professional experience in the design and

documentation of civil residential, commercial and

infrastructure projects.

He brings a wealth of experience to the Triaxial

Consulting team and has a solid understanding of

the requirements for civil engineering design and

documentation.

A proficient user of AutoCAD, Jason also brings

experience using other civil design software, including

12D Model, Drains and MUSIC. Jason is also a keen

communicator with experience in the liaison with clients,

architects and approving authorities to achieve the best

practical outcome to satisfy the client’s needs.

Responsible for the civil design and detail drafting for

residential, commercial and infrastructure projects,

which includes: Preparation of specifications, tender

documents & construction documents. Design of private

and government projects. Stormwater drainage design

including stormwater harvesting, stormwater detention

and water sensitive urban design. Car park and pavement

design. Bulk earth works and civil site works design. Site

inspections and technical investigations. Negotiate and

gather relevant approvals with governing authorities.

KEY PERSONNEL

Currently studying Bachelor of Engineering (Hons) (Civil)

Diploma of Civil Engineering (Design)

Trade Certificate – Steel Fabrication (Boilermaker/Welder)

Certificate III in Engineering (Heavy Fabrication)

OHS Construction Induction Training Certificate (White Card)

TECHNICAL SKILLSProficient in the use of Microsoft Office – Outlook, Excel,

Word, etc Proficient in the use of AutoDesk AutoCAD –

Release 14 to 2016 Extensive use of 12d Model v11

Certificates Include: Basic Road Design, Basic Ground

Modelling, volumetrics & Tin Analysis, Template Modifiers.

Use with stormwater modelling program Drains,

including training workshop (2 days March 2010) Use

with stormwater quality program MUSIC, including

introductory training course (2 days August 2011)

Extensive use with Transoft solutions AutoTurn Pro©

26

FrankNapoliSenior Draftsman

[email protected]

Frank started his career as an apprentice draftsman

at the beginning of 2001 with a medium sized

consultancy. Frank completed his apprenticeship

and due to his determination and passion for drafting

worked his way up to CAD Team Manager in the

13 years there. Soon after he moved onto Triaxial

Consulting.

During this time, Frank has gained knowledge in

structural and civil engineering design, drafting and

managing. He has had the opportunity to work on a

large variety of projects within the structural engineering

industry ranging from small residential developments,

to shopping centres, and onwards to large commercial

warehouses & food processing plants.

Frank has an extensive knowledge in AutoCAD and an

ongoing knowledge in Revit.


Reinforced concrete, structural steel, precast concrete,

clay and concrete masonry, timber framing, presentation

drawings for proposals, shop detail checking.

Industrial, commercial, residential (domestic and low to

medium rise).

Civil

Stormwater drainage, earthworks, civil structures, finished

surface profiles.

Confined Space/Rope Access

Structural surveys of building facades / structures and

confined spaces, preparation of condition reports.

Diploma in Structural Engineering


Level 1 Rope Access Technician


KEY PERSONNEL

27

JamesHeyligersDraftsman

[email protected]

James has gained extensive experience in structural

and civil engineering drafting since he began his

career, in a medium size consultancy, as an Apprentice

Draftsman at the beginning of 2010. James completed

his apprenticeship 1 year early at the beginning of

2013 due to his fast learning skills and determination.

Soon after his apprenticeship, he moved onto Triaxial

Consulting.

During this time, James has built on his technical

and management skills through a wide variety of

structural and civil projects. His experience includes

structural drafting of residential, commercial, industrial,

retail, winery and institutional buildings, along with

management and mentoring of drafters.

James has been closely involved with a large variety of

structural projects that require liaising with architects,

clients, councils, builders and other disciplines to

produce better than expected outcomes with the

use of clear and accurate documents ensuring design

and drawing quality services expected from Triaxial

Consulting.

James has an in depth knowledge of AutoCAD,

AutoTURN and an ongoing knowledge of Revit.

KEY PERSONNEL

Structural Design Certificate IV




Reinforced concrete, structural steel, precast and post

tensioned concrete, clay and concrete masonry, timber

framing, presentation drawings for proposal, and shop

detail checking.

Industrial, commercial, retail, winery, institutional, and

residential (domestic and low to medium rise).

Civil

Stormwater drainage, earthworks, civil structures, finished

surface profiles.

28

ShawnHandleyBIM Manager

[email protected]

Shawn has gained experience in the Building Industry

over the last 27 years since he began his career as

a Trainee Draftsman in 1989, attending Northern

Territory University and completing in 1991. During his

career, Shawn has worked in many disciplines from

residential, light commercial and remedial works.

Shawn has also gained an extensive knowledge of the

construction industry with many projects that required

liaising with Clients, Contractors, Builders and other

construction disciplines to produce accurate and clear

documents ensuring drawing and design quality services

expected from Triaxial Consulting.

Shawn manages Triaxial Consulting’s BIM department

and has experience in various construction fields through

positions held:

• Structural and Architectural Drafting

• Building Certification Compliance Assessments and

Inspections

• Building Estimation and Purchasing

• Thermal Performance Assessments

• Truss Design and Detailing


Reinforced concrete, structural steel, masonry, and

timber structural drawings of drawing presentation for

and tender and construction.

Document Control & CAD Management

Project Documentation to on-line Portals, Management

in AutoCAD review, CAD systems.

Revit Documentation and Design

Accurate – Thermal Performance Assessments

MultiNail Truss Design

Architectural Design

Experience in small-mid size residential projects.

Residential/ Strata /Remedial

Technical investigations / reporting, diagnostics and

remedial solutions, preparation of specifications, tender

documents / construction documents.

Certificate IV Building Design and Drafting

KEY PERSONNEL

29

ChrisSchmidtEngineer

[email protected]

Chris was initially employed as an undergraduate at

Triaxial Consulting before going on to receive first class

honours at The University of Adelaide.

Working at Triaxial Consulting as a design engineer,

Chris has gained valuable experience in structural design

ranging from small residential development to large

commercial-type warehouses. He has also been exposed

to project management skills and continues to grow

under strong guidance from the Triaxial team.

Upon completion of his degree, Chris was offered a

permanent position as design engineer within the

Adelaide office. Chris has quickly gained valuable

experience in the design and detailing of commercial,

industrial and residential structures, consisting of

concrete, masonry, steel and timber design. Chris has

also been exposed to project management & forensic

investigations.

Chris’ professional attitude and refined communications

skills have enabled him to effectively liaise with clients

and manage projects autonomously. His design

knowledge will continue to flourish under the strong

leadership within the Triaxial team.


Structural design and detailing in steel, concrete-steel

composites, reinforced concrete, masonry and timber.

Experience in industrial, commercial & multi-storey

residential design.

Experience in project management

Modelling, analysis and design in Microstran, Inducta

(Slabs), SLOG

Bachelor of Engineering (Civil-Structural) – First Class Hons

Member of the Institute of Engineers, Australia - (MIEAust)

KEY PERSONNEL

30

Industrial

Light Industrial

Commercial

Retail

Community

Institutional

Residential

Winery

Materials Handling

StructuralTrack Record:

31

“”

“Triaxial Consulting brings a wealth of experience to your

project. We develop a specific Management Plan for

each commission undertaken. The Plan is tailored to the

project to ensure that all of the elements are considered

and planned for adequately.”

31

32

Industrial

TRACK RECORD: STRUCTURAL

Project

Helicopter Hanger,

Darwin, NT

Services


Builder

Ahrens Group

End Client

Bond Helicopters Australia

(Babcock International Group)

Description

To expand its offshore helicopter services, Bond Helicopters Australia developed a new dual helicopter hangar at

Darwin International Airport. The development included a 1500m² hangar with 48m clear span portal frames and

750m² of office and storage.

33

IndustrialProject

Siemens Production

Facility, Clovelly Park, SA

Services


Builder

Commercial & General

End Client

Siemens

Description

Manufacturing heavyweight Siemens commissioned the design of this 2500m² facility to be constructed on the

now government owned Mitsubishi site. The substantial facility, part of the Tonsley Park Industry Hub, has room for

expansion which, when completed, will double the footprint of the current structure.


34

Light Industrial


Project

Light Industrial Warehouse,

Albany, WA

Services


Client

MCB Construction

Description

Structural design of shed, including office framing & mezzanine, workshop framing, precast boundary walls, concrete

pavement, retaining walls and foundations.

35

Light Industrial


Project

Forklift Solutions Building,

Hudson Creek, NT

Services


Description

Structural design and documentation including workshop detailing of the steel-framed building and blockwork

amenities structure.

36

CommercialProject

Commercial Building,

Winnellie, NT

Services

Structural & Civil

Engineering

Builder

Tailor Made Building

Services

Description

2 storey commercial structure incorporating Frankie pile system in poor ground conditions, reinforced concrete slabs,

pre-cast concrete facades and structural steel roof.


37

CommercialProject

Industrial/Commercial

Storage Facility, Berrimah, NT

Services

Structural & Civil

Engineering

Builder

Intergain PTY LTD

Description

Commercial development consisting of 3 light industrial storage facilities with mezzanine offices and 5 two-storey

offices in Darwin’s new Berrimah Business Park. In total, 750m² of storage and 1200m² office, constructed with precast

panels, suspended bondek slabs and structural steel framing.


38

Retail

Major Tenant Facades


Project

Flip Out Building,

Darwin, NT

Services


Builder

Ahrens Group

Description

Adding to Darwin’s new entertainment precinct located in Darwin Airport Central, the commercial development

consisted of 2800m^2 commercial space. The development was of tilt-up panel construction and structural steel

framing to suit the tenant’s clear span requirements.

39

Retail


Project

Harley Davidson

Showroom, Albany, WA

Services

Structural & Civil

Engineering

Builder

MCB Construction

End Client

Great Souther Motorcycles

Description

Design of the 1300sqm fit-for-purpose showroom, workshop and office facility for Great Southern Motorcycles, Albany

WA. A mixture of insulated panels and glazing formed the front façade of the showroom, along with steel-framed

blade awnings creating the look of motorbike handles. Large mezzanines were constructed internally for offices and

storage areas.

40

Community

Description

Commissioned by the Barossa Council and partially funded by the federal government’s Tourism Industry Regional

Development Fund, the cycle hub is located adjacent to the Barossa Visitor Information Centre. The Barossa Cycle Hub

offers hire, sales, accessories and amenities aimed at capitalising on cycling as a growing niche market for the Barossa.

Project Services Builder End Client

Barossa Cycle Hub,

Tanunda, SA

Structural Engineering BGI Building Group Barossa Council


41

Community

Description

Triaxial Consulting were involved in the conceptual design and structural engineering of the new SALT school building

in Cambodia. The building consists of four large classrooms upstairs and two classrooms and a library downstairs. The

structure is raised from floodwaters by utilising suspended slabs and large concrete columns, incorporating timber

framing elsewhere. We were privileged to volunteer our services as part of our ongoing support and sponsorship of

RAW impact.

Project Services End Client

SALT School, Cambodia Concept Design &


RAW Impact


42

InstitutionalProject Services Architect End Client

Description

The project is a two storey classroom/admin building and bus shelters. The Structure consists of reinfored concrete

slabs and columns, steel façade framing, reinforced block walls and steel roof framing. The first floor concrete slab had

to be designed and waterproofed to allow the construction of the upper floor to be delayed by 12 months while still

allowing the ground floor to be fully functional and occupied.


Livingstone College,

Ormeau, QLD

Structural Engineering Alpha Architects Livingstone College

43

Residential

Description

The project consisted a large ground floor and second storey addition to an exisitng masonry building. The second

storey addition extended past and cantilevered over the exisitng lower level. The new second level needed to be

supported, in large load point areas, on new steel columns that had to be hidden into the exisnting walls.

Project Services Architect Owner

Private Residence,

Stirling, SA

Structural Engineering John Adam Architect Private Residence


44

WineryProject Services Builder End Client

Description

Reincarnated from the rubble, the cellar door and function centre seamlessly integrates the old with the new

providing for a challenging structural design.


Meshach Cellar,

Rowland Flats, SA

Structural and Civil

Engineering

Underwood Carpentry and

Building

Grant Barge Winery

45


Description

Structural design of the new cellar door. The project involved converting old stables into a new cellar door, retaining

stone walls and utilising second-hand timbers.

Pindarie Winery,

Gomersal, SA

Structural Engineering Pindarie Wines

Winery


46

MaterialsHandlingProject Services Client End Client

Description

Structural design of silo bases, conveyor/walkway gantries, trestles, elevator towers, platforms, warehouse, and

foundations.


Mill Structure and

Production Facility,

Wasleys, SA

Structural Engineering Ahrens Group Ridleys Premix & Liquid

Store

47

Description

Engineering design of new conveyor system, including foundations, stacker shaft, conveyors, trestles and access

structures.

Project Services Client End Client

Stacker Conveyer,

Ottoway, SA

Structural Engineering Barossa Engineering

Services

Rocla Quarry Products

MaterialsHandling

TRACK RECORD: MATERIALS HANDLING

48

Remedial

Rehabilitation

Rope Access & Confined Space

Strata & RemedialTrack Record:

49

“”

“Triaxial is a fresh and dynamic engineering consulting

company, which delivers client specific, practical solutions

to resolve complex problems, and put our customers

minds’ at peace with better than expected outcomes.”

49

50

TRACK RECORD: STRATA & REMEDIAL

RemedialProject Services Description

Building Rehabilitation,

Cremorne Point, NSW

Initial Investigations,

Scope of Works, Tender &

Contract Preparation and

Project Management.

Before After

Design and documentation of substantial building and

façade upgrade to a prominent marquee building on

the Sydney Harbour Foreshore. Scope of works included

replacement of deteriorated window lintels, installation

of masonry wall ties, utilising the Westox Cocoon System

to remove excessive salts from the masonry bricks and

tuck-pointing of the entire building to reinstate the

integrity of the mortar joints and restore the building to

its original appearance.

During After

51


RehabilitationProject

Description

Investigations, structural design, scope of works, tender and project management of rehabilitation works including

structural concrete repairs and waterproofing works.

Structural Concrete

Repairs & Waterproofing,

Mosman, NSW

52

Rope Access &Confined Space



Description

Rope access façade inspection and assessment, direction of makesafe works structural and remedial engineering

design and documentation, structural assessment, design and documentation of temporary access, design and

documentation and overseeing structural rectification works

Structural Façade Repairs,

Sydney CBD, NSW

Rope Access / Remedial /


Building Owner

53

Access Shaft Construction,

Manly Vale, NSW

Structural Engineering Monadelphous Water

Infrastructure

Sydney Water



Description

Structural design and documentation for temporary works, rehabilitating final structures.


54



Project Services Client

Description



documentation, preparation of scope of works and overseeing structural rectification works.

Façade Inspection,

North Sydney, NSW

Rope Access / Remedial /


Building owner

55

5656

Masterplanning

Infrastructure

Flood Modelling

Stormwater & Bulk Earthwork

Cemeteries

CivilTrack Record:

57

“ ”We have sustained a healthy organic growth which can

be directly attributed to the prompt, personalised and

professional service afforded to all our clients

57

58


Description

Broadview Estate comprises 68 large lots of minimum 2000m². Design challenges such as Water Sensitive Urban

Design features modelled in MUSIC software and extensive modelling of sewer and water infrastructure extensions

from the existing Council network were undertaken to ensure the subdivision exceeded requirements and provided

for future development of previously unserviceable land.

Broadview Estate

Residential Subdivision,

Mudgee, NSW

Civil Engineering

including; Masterplanning,

Roads, Services and WSUD

A1 Earthworx Deleki Pty Ltd and

Resiland Pty Ltd Joint

Venture

Masterplanning

TRACK RECORD: CIVIL

59

TRACK RECORD: CIVIL

InfrastructureProject Services End Client

Description

Superintendence of construction of Stage 1 including providing certification of progress claims to St George Bank and

preparation of works as executed drawings. Civil design of Stage 2 including roads, sewer, stormwater, water supply

and water sensitive urban design features. Preliminary civil design and servicing plans of Development Application

Modification for future stages circa 400 lots and civil infrastructure advice and planning for future masterplanned

staged release of up to 2000 lots.

Caerleon Residential

Subdivision, Mudgee, NSW

Civil Design and

Construction

Superintendence

Caerleon Mudgee Pty Ltd

60

TRACK RECORD: CIVIL

Stormwater & Bulk EarthworkProject Services Builder End Client

Description

Proposed residential block of units. Triaxial Consulting was engaged to carry out the structural engineering for the both

the permanent reinforced structure and temporary shoring support of the basement excavation which was extended

hard up against the boundary to a depth of approx. 10m. Adjacent structures on 2 sides had to be supported during

the basement excavation and ensure no movement of the surrounding ground. The use of solider piers and temporary

ground anchors were progressively installed as the depth of the excavation progressed. A dilapidation survey of all

adjacent structures were carried out prior to commencement of construction to ensure a comprehensive record of

their condition was recorded. The structural design was tailored to suit construction cycles and simplify the formwork

and speed up construction.

Residential Apartment

Development,

Homebush, NSW

Structural Engineering Alpine Projects Alpine Projects

61

TRACK RECORD: CIVIL

Stormwater & Bulk EarthworkProject

Description

Civil design of the creek crossing required to access vineyard by winery trucks and machinery, for Barossa Valley Estate.

Krondorf Creek Crossing,

Krondorf, SA

62

Flood ModellingProject Services Landscape Architect End Client

Description

As part of a team of design consultants commissioned to draft a Cemetery Landscape Masterplan, Triaxial Consulting

provided flood modelling and designs for a series of stormwater on-site detention basins. This design took into account

all stormwater control measures caused by increased runoff future development within the cemetery. All future

developments will not be required to address downstream flooding as the infrastructure will be in place to service a

fully developed cemetery.

Wollongong Cemetery

Catchment Analysis,

Kembla Grange, NSW

Flood and On-Site

Detention modelling

of Wollongong Lawn

Cemetery

Florence Jaquet Wollongong City Council

TRACK RECORD: CIVIL

63

64

Track Record:ProjectManagement

65

“ ”“The Triaxial Consulting team represent the collaboration

of knowledge and experience acquired over decades of

engineering consultancy practice.”

65

66


Description

Rookwood Cemetery, located near the Sydney suburb of Lidcombe, is the largest cemetery in the Southern

Hemisphere. Whilst embracing the rich heritage and historical significance of Rookwood, the capital works program

will provide much-needed new roads and infrastructure to the cemetery, established in 1860.

TRACK RECORD: PROJECT MANAGEMENT

Rookwood Cemetery

– 5 Year Capital Works

Program

Structural and Civil

Engineering, Project

Management and Contract

Administration

Various Rookwood Necropolis

Trust

Cemeteries

67

Project End Client

Description

As part of our involvement with cemeteries, Triaxial Consulting has been involved with a number of different aspects

of cemetery operations and their environmental impact and sustainability. Listed below is a brief summary of some of

these projects.

• Modern burial systems. Departing from the conventional burial process, Triaxial Consulting reviewed the ground

water movements and drainage repercussions of constructing a burial space from placing precast concrete (egg

crate type arrangement) units together and back filling over them. Triaxial investigated and designed a drainage

system that complimented the decomposition process with the need to remove stagnate water inside the grave

voids.

• Triaxial has been involved with the design of stormwater systems that use bio-swales to capture surface runoff and

through the use of soakage medium to capture excessive nutrients etc. to ensure a water sensitive urban design

and improvement of discharge into the local stormwater system which ultimately drained into Sydney harbour.

• Rookwood’s Risk Management Plan and Bush Fire Management Plan. Triaxial was commissioned to draw up both

the RMP and BFMP for Rookwood Necropolis. The largest cemetery in the southern hemisphere and the largest

Victorian cemetery in the world. Triaxial Consulting had to scrutinise and audit Rookwood’s procedures, assets and

operations to be able to an adequate understanding of the cemetery to be able formalise their WHS procedures

and emergency plans.


Cemetery Sustainability Rookwood Necropolis

Trust

Cemeteries

68


Rope Access & Confined SpaceProject Services Client

Description



documentation and overseeing structural rectification works

Structural Façade Repairs,

Sydney CBD, NSW

Rope Access / Remedial

/ Structural Engineering/

Project Management

The Metro Hotel

69

RehabilitationProject Services Description

Sea Wall Rehabilitation Structural Engineering,

Scope, Tender & Contract

Preparation, Project

Management

Structural design, documentation and project

management of the rehabilitation of a severely

deteriorated Sydney Harbour sea wall.


70

Before After

Before After

Remedial

Description

Structural Engineering Services and Project Management, including structural design and preparation of detailed

repair specifications, supervision of the works on site, and the provision of structural engineering site instructions as

required throughout the duration of the works.


Strutural Rectification,

Waverton, NSW

Forensic Investigations,

Scope of Works, Structural

Design, Tender, Contract &

Project Management

Real Property Services


71

7272

Legal

Heritage

Forensic Engineering & Emergency Response

Insurance

Specialist ServicesTrack Record:

73

“ ”We aim to apply technical innovation practically,

commercially and sustainably.

73

74

TRACK RECORD: SPECIALIST SERVICES


Description

Forensic site investigations, building movement monitoring, and structural analysis of structural damage to building as

a result of defective building construction. We provided expert witness services for litigation.

Building Construction

Defects, Silverwater, NSW

Structural and forensic

engineering and expert

witness services

Building Owners

Legal

75



Description

Forensic site investigations, and structural analysis / review of claimed implications of tree root damage to an adjacent

property. We provided expert witness services for litigation.

Tree Root Damage From

Adjacent Lot,

Strathfield, NSW

Structural and forensic

engineering, and expert

witness services.

Building Owners

Legal

76


Project Services Landscape Architect End Client

Description

As part of a Rookwood Cemetery 5 Year Capitol Works Plan, Triaxial Consulting was engaged as the Project managers,

project superintendent and civil engineers. The upgrade of Rookwood’s aging infrastructure is an ongoing 5 year

capitol works program which entails NSW Heritage listed areas of the cemetery. All works in this are required

archaeological investigations to ensure all new works were in keeping with the original architectural intent of the

original cemetery. Specific areas of the cemetery were identified as historically significant. Archaeological excavations

were carried out, recorded and the subsequent civil engineering designs took into account the original architecture of

the cemetery.

Archaeological

Investigations,

Rookwood, NSW

Civil Engineering, project

management and project

superintendent.

DEM Rookwood Necropolis

Trust

Heritage

77



Description

Triaxial Consulting was engaged to review and provide comment on a heritage listed cottage that had been identified

as of concern by the local council. Triaxial Consulting attended site and immediately declared the structure as

unsafe and at risk of immediate collapse. A short-term solution of supporting the structure from outwards collapse

was designed and erected. The design was mindful of not loading the existing structure and at the same time not

damaging the structure any further bearing in mind the limitation imposed on heritage listed buildings. All works

were in accordance with strict council conditions, Heritage Council of NSW and the Burra Charter requirements.

The long term plans for the building are yet to be determined.

Varrowville Cottage

Structural Stabilisation,

Varrowville, NSW

Structural Engineering –

Stabilisation of heritage

listed cottage

Catholic Cemeteries Board

Heritage

78

Project Client

Description

Forensic investigations, structural design and documentation, project management of the reconstruction of a

residential bridge.

Flooding Damage,

Gordon, NSW

Westpac General Insurance

/ Cunningham Lindsay

Australia

Forensic Engineering &Emergency Response


79


Description

Structural engineering services and direction of temporary building stabilization / protection works following storm

surge damage to ocean front properties.

Storm Surge Damage,

Collaroy, NSW

Structural Engineering Property owners

Forensic Engineering &Emergency Response


80



Description

Forensic site investigations, structural analysis and modelling of structural damage to industrial production facility,

resulting from Cyclone Winston.

Cyclone Damage, Ra, Fiji Structural and forensic

engineering services

Crawford and Company

Insurance

81

Insurance



Description

Post road construction analysis of damage to residential building, incorporating post construction vibration analysis.

Post Construction Vibration

Investigation and Analysis,

Duffys Forest, NSW

Structural and Forensic

Engineering services

Cunningham Lindsey

82

Track Record:Innovation

83

“ ”“We have a proven, extensive track record of innovation.

We aim to be nationally recognised as a leader in quality

consulting.”

83

84

TRACK RECORD: INNOVATION


Description

Concept, structural design and documentation of live flow sewer silt removal system.

Desilting Technology,

Manly Vale, NSW

Structural Enginerring Monadelphous Water

Infrastructure

Sydney Water

DesiltingTechnology

85



Description

Concept, structural design and documentation for demolition, removal, earthquake retrofit strengthening and

reconstruction of heritage sandstone fountain structure.

Rehabilitation and Seismic

Retrofit, Frazer Fountain,

Hyde Park, NSW

Structural Engineering HBS City of Sydney

Frazer Fountain

86


Shaft ConstructionProject Services Client End Client

Description

Concept, structural design and documentation of retro fit man hole construction and reception portal penetration,

stabilization and strengthening.

Access Shaft Construction,

Manly Vale, NSW

Structural Engineering Monadelphous Water

Infrastructure

Sydney Water

87


Project Services Builder Client

Description

Surface modelling and manipulation. A 3D surface model was created for a 3km radius from the tip site. A reference

point was then nominated which matched the proposed future maximum height of the refuse pile at the tip. This

point was then projected out on to the surrounding surface to determine if the future height of the tip would be visible

in the surrounding 3km radius so that Council could argue no visual impact would be introduced by the new refuse

height. We prepared a series of colour maps (in the email out folder) that showed the impact at the different RL’s.

Green areas were those that could be seen and red where it was unable to be seen. We also modelled the reduced

impact by introducing a 10m high earth bund around the tip – this was done by manipulating the surface and re-

running the model.

Proposed Landfill

Development,

Mudgee, NSW

Modelling the visual impact

of the proposed land fill

heap at the Mudgee Waste

Disposal Centre (tip)

Mid Western Regional

Council

Mid Western Regional

Council

Waste Disposal

88

QualityAssuranceTriaxial Consulting is committed to the delivery of

quality projects and operates a Quality System which

meets all the requirements of AS/NZS ISO 9001:2000

Quality Management Systems.

Triaxial Consulting develops a specific Management Plan

for each commission undertaken. The Plan is tailored

to the project to ensure that all of the elements are

considered and planned for adequately. These include

the following elements to the right.

We undertake a consultative approach in the

development of all elements of Quality Planning,

involving the client where appropriate to ensure the

Plan meets the needs of the project and the client’s

expectations prior to commencement.

Our assigned Quality Manager will be our ‘single point of

contact’ for the completion of the Plan and the delivery

of the project in accordance with the Plan. The focus on

quality management, systems and results provides the

foundation for the Triaxial Consulting service delivery

model.

TIMEdetailed programme of works and resource allocation

COSTfinancial milestones and rates detailed

QUALITYKPIs nominated and appropriate checklists and forms

set out

OHSEKPIs nominated and thorough risk assessment

completed

EMPKPIs nominated and site specific EMP developed and

adhered to

89

Occupational Health Safety &RehabilitationTriaxial Consulting consider OHS&R a priority from

project inception to hand-over and as such have

implemented an OHS&R Management System. We work

proactively with our staff & sub-contractors to provide advice

and support in managing OHS&R matters.

Triaxial Consulting Managers are responsible for the safe

performance of activities within their area of responsibility

& must accept that all safety incidents & their impact on

health are preventable and continually aspire towards this.

All employees are responsible for performing their duties in a

manner which ensures their own safety and that of others.

To achieve the above we will:

Ensure that all health & safety instructions are to be

applied in conjunction with relevant

legislation, codes of practice etc.

Assess health & safety in all stages of planning, design

& construction.

Incorporate hazard control systems.

Commit sufficient resources to ensure effective

implementation of safety management systems.

Ensure all employees & sub-consultants are trained,

skilled, informed & equipped to carry out all work in a

safe manner.

Provide a program of continuous education & learning

to enhance safety awareness & skill level.

Promote consultation with health & safety

representatives & employees.

Implement & maintain client health and safety

requirements.

Provide a review system for all health and safety

management systems to ensure continued

compliance and to provide improvements.

We ensure all sites are managed through a process of:

OH&S Compliance Audits & Risk Assessments

If applicable – JSA, SWMS, Site Inductions & Ongoing

Site Inspections

Investigate, Report & Promptly Rectify OH&S Matters.

We take our OH&S responsibilities, as Managing

Consultant, very seriously and ensure that we are

aware and comply with all relevant legislation & client

requirements.

90

ManagementRisk

Triaxial Consulting maintains the following risk

management procedures that are compliant with AS/

NZ 4360 – 1995:

Risk Management:

RM01 Risk Management Procedure

RM02 Behavioural Science Procedure

RM03 Risk Assessment Procedure

RM04 OHS & Environmental Threat Identification

Procedure

RM05 Global Environmental Threats Register

The standard procedure for adopting a risk management

approach is;

STEP 1 Identify the hazards (i.e. source) if there is a regulation,

advisory standard, code of practice or any other guidance

material identified, the as a minimum follow the

information contained in this material.

STEP 2Assess the risk (i.e. frequency, duration and outcome of

the consequences).

STEP 3Determine what control measures to take (i.e. evaluate

methods of removing, reducing or controlling the risks).

Note: Legislative requirements must be implemented as

a minimum requirement.

STEP 4Implement the control measures.

STEP 5Evaluate and review the actions taken to ensure that they

have been effective.

91

ManagementEnvironmental

Triaxial Consulting recognise that development

activities have an impact on the environment, and that

the challenge is to ensure that impact is a positive and

well-managed one.

Protecting and enhancing the environment both by

preventing pollution events occurring and by designing

and managing processes to prevent near miss occasions

are integral to our business operations. It is our policy

to invest and operate in a way to ensure this is not

compromised.

The requirements of the Environmental Management

System, as it will relate to ou`r commissions, are typically

expected to be:

All legislative requirements will be met, and

appropriate auditing and compliance established to

ensure standards are consistently met.

Community relations are an integral part of Triaxial

Consulting’s business. Our staff are drawn from

construction, technical and customer service

backgrounds with key awareness of the high

standards of information and understanding

required for public works.

Additionally, the aim is always to ensure that information

is provided and the works made clear so that there

is minimal need for any complaints from the public.

Complaints management is unfortunately necessary as

a consequence of works undertaken. Our specialist staff

handle this in a sensitive, confidential and professional

manner, drawing on their experience in private industry,

local and state government roles.

Triaxial Consulting have implemented an Environmental

Management System that has been developed to

achieve the following:

ISO AS/NZ 14001:2004 compliance, to ensure continual

improvement in environmental performance.

Ensure compliance with stated objectives and targets

for improved environmental performance.

Achieve continual improvement in environmental

performance through regular audits and management

reviews.

Comply with relevant environmental legislation, codes

of practice and other regulatory requirements.

92

““Our mission is to be at the forefront of professional

consultancies providing services exceeding client

expectations, and in doing so, we aim to create lifetime

customers.”

92

93

OurLocations

SYDNEYSuite 12, Level 14, 327 Pitt St

Sydney NSW 2000

ADELAIDELevel 2, 1 King William Rd

Unley SA 5061

BAROSSAUnit 1, 86D Murray Street

Tanunda SA 5352

DARWINUnit 1, 31 Jessop Crescent

Berrimah NT 0828

MUDGEE46 Market Street

Mudgee NSW 2850

1300 874 294TRIAXIAL.COM.AU

94

S Y D N E Y | A D E L A I D E | B A R O S S A | D A R W I N | M U D G E E

triaxial.com.au

Documents

CAPABILITY 17/18 - Triaxial Consultingtriaxial.com.au/wp-content/uploads/2018/11/Triaxial-Capability_17-18... · 3. Triaxial is a fresh and dynamic engineering consulting company,