2
MCL Cantilever Gate Magnetic Automation Pty Ltd www.magnetic-access.com.au Safety Devices Standard safety devices include PE beams, light curtains, inductive loop detectors and signage for use on automatic gate systems. A variety of other safety enhancements are available. Drive System A typical motor drive supplied by Magnetic is the MSL 20 MCE but the gate system allows a variety of motors and controllers to be used. Accessories A variety of accessories are available such as climb protection spikes, barbed wire and pressed spears etc. Bi- parting gates can also be applied to wide roadways. The MCL sliding gate is ideal for light commercial and warehousing applications where speed and efficiency is of high importance. The modern design eliminates the need for ground tracks and overhead rails. The cantilever system and customised options allow for a variety of motors and controllers to be installed dependent on the duty cycle of the gate. The gate is constructed from pre-galvanised steel and is powder coated to individual colour requirement. All rollers are supplied with sealed ball bearings which are designed to exceed gate loads and are capable of 100% duty cycle. > Light Weight > Maximum Gate Opening 6 metres > Opening speeds up to 500mm/sec > Constructed from pre-galvanised steel Construction The gates are constructed from pre- galvanised steel and are powder coated to individual colour requirements. The MCL Sliding gate allows for single leaf spans of up to 6 metres. CANTILEVER SWING TRACK

Cantilever Gate · parting gates can also be applied to wide roadways. The MCL sliding gate is ideal for light commercial and warehousing applications where speed and efficiency is

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Cantilever Gate · parting gates can also be applied to wide roadways. The MCL sliding gate is ideal for light commercial and warehousing applications where speed and efficiency is

MCLCantilever Gate

Magnetic Automation Pty Ltdwww.magnetic-access.com.au

Safety Devices

Standard safety devices include PE beams, light curtains, inductive loop detectors and signage for use on automatic gate systems. A variety of other safety enhancements are available.

Drive System

A typical motor drive supplied by Magnetic is the MSL 20 MCE but the gate system allows a variety of motors and controllers to be used.

Accessories

A variety of accessories are available such as climb protection – spikes, barbed wire and pressed spears etc. Bi-parting gates can also be applied to wide roadways.

The MCL sliding gate is ideal for light commercial and warehousing applications where speed and efficiency is of high importance. The modern design eliminates the need for ground tracks and overhead rails. The cantilever system and customised options allow for a variety of motors and controllers to be installed dependent on the duty cycle of the gate. The gate is constructed from pre-galvanised steel and is powder coated to individual colour requirement. All rollers are supplied with sealed ball bearings which are designed to exceed gate loads and are capable of 100% duty cycle.

> Light Weight > Maximum Gate Opening 6 metres > Opening speeds up to 500mm/sec > Constructed from pre-galvanised steel

Construction

The gates are constructed from pre-galvanised steel and are powder coated to individual colour requirements. The MCL Sliding gate allows for single leaf spans of up to 6 metres.

CANTILEVER SWING TRACK

Page 2: Cantilever Gate · parting gates can also be applied to wide roadways. The MCL sliding gate is ideal for light commercial and warehousing applications where speed and efficiency is

MC

L,00

1_E

N_0

5/03

.201

9

Diagram provided for information purpose only

Magnetic Automation Pty Ltdwww.magnetic-access.com.au

National Sales & ServicePhone 1300 364 864

SydneyPhone +61 2 9421 8800E-mail [email protected]

Melbourne Head OfficePhone +61 3 9339 2900E-mail [email protected]

BrisbanePhone +61 7 3801 2100E-mail [email protected]

PerthPhone +61 8 9205 9900E-mail [email protected]

EnvironmentISO 14001

Health & SafetyOHSAS 18001

Quality ISO 9001

Magnetic stands for pioneering products - in every way. Our access control systems for vehicles or pedestrians clear the way for thousands of people every day - at car parks, toll gates, stations, airports and buildings. Our technology is also pioneering, however: with innovations drives, intelligent control systems and well thought-out details it provides maximum safety and longevity. Are you also on the path to Magnetic?

Access toProgress

Technical Data MCL Cantilever Gate

Maximum Gate Opening Length 6,000 mm

Standard Gate Height (custom heights available) 1,800 or 2,100 mm

Warranty 1 Year

Member of