Upload
hynek-bures
View
221
Download
0
Embed Size (px)
Citation preview
8/12/2019 CanonLegriaHFS200 Quick Guide
1/9
1
PUB. DIE-0346-001
HD Camcorder
Instruction Manual
Y
A Quick
Introduction
Guide
Within 10 Minutesyou will be able to shoot video with this camcorder!
Y
Introduction: p. 2
01 Charge Your Battery: p. 4
02 Adjust Camera Settings: p. 4
03 Insert Memory Card: p. 5
04 Select Video Quality: p. 6
05 Record: p. 6
06 Zoom: p. 7
07 Steady Shot: p. 8
08 Attach Microphone: p. 8
09 Play Back: p. 9
8/12/2019 CanonLegriaHFS200 Quick Guide
2/9
2
PLEASE NOTE: THIS IS A VERY SHORT INTRODUCTION ENABLING YOU TO USE THECAMERA QUICKLY. It has been put together from the original Canon HFS200 instruc-tion manual. FOR MORE DETAILED INFORMATION CONSULT THE FULL INSTRUCTIONMANUAL.
The camera functions with a touch screen: Toucha menu item to select it. Swipeyournger up or down, left or right to navigate within the menu.Whenever you need to use the touch screen, this manual will indicate aThe navigation within the menu and sub-menues is indicated with a
THIS QUICK GUIDE EXPLAINS THE FUNC-TIONS OF THE CAMERA IN THE Dual ShotMODE: . This mode lets you record videoand take photos easily, letting the camcordertake care of all the settings.
BUT FIRST:IN ORDER TO CHANGE CAMERA SETTINGS(such as choosing the recording format)YOU NEED TO SWITCH TO:
Introduction
This spot indicates inwhich mode the camera is:
Camera Mode
Photo Mode
Dual Shot Mode
8/12/2019 CanonLegriaHFS200 Quick Guide
3/9
3
The menu is structured as follows:
1 Turn on the camcorder.
2 Make sure you are in Camera Mode.
2 Select [FUNC.]
3 Select [MENU]
4 The LCD will display:
5 Tab to select one of the 3 sub-
menus.
6 Swipe your nger up and down
to navigate within the sub-
menu. When the desired menu
item is in the organe selection
bar tap the frame on the right.
8/12/2019 CanonLegriaHFS200 Quick Guide
4/9
4
01 - Charge Your Battery
02 - Adjust Camera Settings
SET THE MODE SWITCH TO:
To adjust a few basic settings before starting to lm.
8/12/2019 CanonLegriaHFS200 Quick Guide
5/9
5
03 - Insert Memory Card
THIS CAMERA RECORDS VIDEO ON SD CARDS ONLY!
To erase earlier recordings on the SD card, giving you maximum re-cording capacity, format/Initialize the memory card.
1 Turn on the camcorder.
2 Use the touch screen:
Power ON/OFF
8/12/2019 CanonLegriaHFS200 Quick Guide
6/9
6
04 - Select the Video Quality (Recording Mode)
The camcorder offers 5 recording modes. Changing the recordingmode will change the recording time available on the memory card.
1 Turn on the camcorder into the operating mode.
2 Use the touch screen:
3 Set recording mode to SP.
05 - Record
1 Set the mode switch to .
2 Turn the camcorder on.
To record video
Press to begin recording.
Press again to pause
the recording.
To take photos
1 Press halfway.
Once the focus is automatically adjusted, will turn green and
one or more AF frames will appear.
2 Press fully.
The ACCESS indicator will ash as the photo is being recorded.
8/12/2019 CanonLegriaHFS200 Quick Guide
7/9
7
06 - Zoom
1
2
The zoom speed can be altered:
* If you push the lever a little bit to the right the camera will zoom
slowly.* If you push the lever all the way to the right the camera zooms
rapidly.
8/12/2019 CanonLegriaHFS200 Quick Guide
8/9
8
07 - Steady Shot / Image Stabilisation
The camcorder stabilises the image automatically, so that you can producesteady images even when holding the camera in your hands, or when walk-ing while lming. - You can make image stabilisation even more powerful
by using the button. Powered IS is most effective when you arestationary and zooming in on far subjects.
1 Hold the LCD panel with your left hand to add stability.
2 Press and hold as long as you want to activate Powered IS.
appears in yellow, while
Powered IS is activated.
08 - Attach an External Microphone
You can use external microphones for optimal audio recording, such as re-cording interviews in a noisy environment.
1 Connect the external microphone to
the MIC terminal. 2 Hand the microphone to the person in front of the camera.
8/12/2019 CanonLegriaHFS200 Quick Guide
9/9
9
09 - Play Back your Recordings
You can play back your videos in the camera, making sure you have record-ed what you wanted.
1 Press . 2 Open the [Original] index screen,
if it is not displayed. 3 Look for the scene you want to
play back. 4 Use the sreen buttons to navigate.
Hynek Bures, 2011, [email protected]