Camese2013 14

2013/2014 cames

e co

mpen

diu

m – can

adian

min

ing tec

hn

olo

gy

Your guide to Canadian mining teChnologY on the internet

www.camese.org

Cana

dian P

ublic

ation

s Mail

Agr

eeme

nt #

4003

3359

2013 2014

of canadian mining suppliers

Camese CompeNdium

Your guide to Canadian mining technology

Your Winning Solution

EPCM Technology

SPTANKHOUSETECHNOLOGY

ENGINEERING - EPCM has provided engineering services and technology to the base metals industry for over three decades.

EPCM applies its expertise to developing creative and practical solutions which will enhance their clients’ needs for better operation, lower maintenance costs, higher reliability and productivity. Our experience includes new plant design, expansion/modernization, process optimization, safety and environmental projects.

EPCM has developed its business based on personalized service, design creativity, project management and cost control. Complete turnkey services are offered for project execution and single responsibility including Basic Engineering Studies, Detailed Designs, Procurement, Project Management, Plant Upgrades and Optimization.

TECHNOLOGY - EPCM has participated in projects that today utilize over 800,000 cathodes and produce over 5,000,000 tonnes of copper annually.

Cathodes, Equipment, Engineering Supply & Services

EPCM has more than 20 years of experience in the provision of Stainless Steel Cathodes, Cathode Handling Equipment and Engineering for modernization and new projects for copper electrorefining and electrowinning production plants. The SP cathode and the robotic stripping system with new cathode wash technology makes EPCM your preferred technology!

Cathode Manufacturing

Tecnologias Cobra Limitada, an EPCM company, operates a new cathode manufacturing facility conveniently located in Antofagasta, Chile, the heart of the world copper belt. Cobra was inaugurated in 1998 and provides manufacturing and service to the copper industry. Over 600,000 permanent cathodes have been manufactured in Cobra’s plant with the largest single order being 132,000 for the largest refinery in the world. Cathodes manufactured by Cobra are in service globally.

SERVICE – Client support includes spare OEM parts, on-site machine service, equipment upgrades, cathode maintenance, hydraulic component repair and training.

Taking responsibility for the maintenance of your production equipment is a demanding challenge. Our team of professionals and technicians work hard to keep the equipment under their responsibility operating well. Contract maintenance has been adopted by some major producers.

EPCM2829 Sherwood Heights Drive,Oakville, Ontario, L6J 7R7 Canada

Tel : 1.905.829.1711 • Fax: [email protected] • www.epcm.com

CAMESE 2013/2014

The Meadowbank Mine, Nunavut, Canada, is Agnico Eagle’s first Low Arctic mine and their largest gold producer.

Cover Photo: Graeme Oxby Photography

Welcome Message . . . . . . . . . . . . . . . . 3

Subsectors of the Canadian Mining Supply Industry and Member Companies Serving under Subsectors . . . . . . . . . . . . . . . . . 8

Corporate Profiles of Canadian Mining Suppliers . . . . . . . . 18

Country Interests Service . . . . . . . . . 143

What is CAMESE? . . . . . . . . . . . . . . 146

CAMESE’s People . . . . . . . . . . . . . . 147

CAMESE’s Board of Directors . . . . . 147

Trade Show Calendar . . . . . . . . . . . . 148

CAMESE’s Participation in International Mining Events . . . . . . 149

Additional CAMESE Members . . . . . 150

Index of CAMESE Members . . . . . . 153

Masthead . . . . . . . . . . . . . . . . . . . . . . 158

Dear Reader,This 18th annual issue of the CAMESE Compendium of Canadian Mining Suppliers presents our association’s corporate members, which are Canadian mining suppliers looking to market their products and services to the mining industry across Canada and around the world.

With nearly 10,000 exploration, development and mining operations worldwide, half of which are outside our country, the Canadian mining industry has become renowned for providing highly productive, safe and environmentally sound performance. The success our miners enjoy is largely due to our suppliers, who

offer highly advanced technology at competitive costs. To ease your search to find the suppliers best suited to help you run successful, modern mining operations here and abroad, you need to look no further than among these pages.

Our association was founded by a small group of Canadian business people, who had an idea during a trade mission to Chile and Peru in 1981. Their concept was that by banding together they could accomplish more than they could as individual companies. This common ground still exists for CAMESE today, even though the membership has grown from a handful of organizations to more than 300.

CAMESE’s mission is to assist Canadian mining supply firms to be successful in marketing to the world. We hope you agree this Compendium showcases our industry in a manner that will encourage you to want to do more business with Canadian firms.

In addition to the Compendium, CAMESE provides its members with marketing information and advice, advocacy and a marketing program that includes our website and participation in Canada pavilions at international mining exhibitions.

The book starts off with a subsector index that will help you select groups of firms in which you may have interest. For example, if you are interested in Mineral Processing Equipment & Supplies, you will find 24 firms under that heading. Environmental Equipment & Services has grown into a major specialty with 11 members entered. For each subsector, you will find descriptive and contact information within individual corporate profiles.

Please contact our member firms directly for further information on their products and services, or visit our website at www.camese.org to find out more. If you wish CAMESE’s assistance in sourcing products or services, our staff is always pleased to help you find appropriate business partners.

Bienvenue au Compendium 2013/2014 CAMESE des Fournisseurs Miniers Canadiens. Ce livre n’est publié qu’en anglais. Cependant le site web de CAMESE à www.camese.org est également disponible en français.

Bienvenido al 2013/2014 Compendio de CAMESE de Abastecedores Canadienses para la Mineria. Este libro se publica solamente en inglés, pero la página web de CAMESE en www.camese.org esta disponible en español.

Yours sincerely,

Jon G. Baird, B.Sc., P.Eng. Managing Director

ISSN 1485-8401

Canadian Publications Mail Agreement #40033359

Printed in Canada

Welcome to the 2013/2014 CAMESE Compendium of Canadian Mining Suppliers

Contents

Suite 101, 345 Renfrew Drive o Markham, Ontario, L3R 9S9, Canada o Phone: 1-905-513-0046 Fax: 1-905-513-1834 o Email: [email protected] o Website: www.camese.org

2013/2014 cames

e co

mpen

diu

m – can

adian

min

ing tec

hn

olo

gy

Your guide to Canadian mining teChnologY on the internetwww.camese.org

Cana

dian P

ublic

ation

s Mail

Agr

eeme

nt #

4003

3359

2013 2014


Camese CompeNdium Your Guide to Canadian Mining Technology

POWERTRAIN PARTS FOR MINE TRUCKS,LOADERS&SCOOPTRAMS

L&M Truck Parts Limited 201 Snidercroft Road, Concord, Ontario, Canada L4K 2J9

Telephone: 905-669-2292 Fax: 905-669-6319 Toll-Free in North America: 1-800-387-3765

Email: [email protected]

ll manufacturer’s names, numbers, symbols and descriptions are for reference purposes only, and it is not implied that part is the product

of the manufacturer listed, nor is it intended to imply that L&M Truck Parts Limited is an authorized source for any of the manufacturers

listed in this brochure.

DOWN TIME IS EXPENSIVE.And when you don’t have the parts you need, you’re losing a lot of time andtoo much money. That’s why, atL&M Powertrain Parts, we’redriven to serve you better. Withhigh-quality transmission,torque converter, differentialand planetary axle parts,where and when you needthem.

Axletech • Clark • Dana • Eaton Rockwell • Spicer • Tractech

WWW.LMPOWERTRAINPARTS.COM

ATLAS COPCO DUX EIMCO GHH MTI TAMROCK TORO VOLVO WAGNER

Mining Ad Double- Dovetail:Layout 1 9/24/07 3:59 PM Page 1

POWERTRAIN PARTS FOR MINE TRUCKS,LOADERS&SCOOPTRAMS

L&M Truck Parts Limited 201 Snidercroft Road, Concord, Ontario, Canada L4K 2J9

Telephone: 905-669-2292 Fax: 905-669-6319 Toll-Free in North America: 1-800-387-3765

Email: [email protected]

ll manufacturer’s names, numbers, symbols and descriptions are for reference purposes only, and it is not implied that part is the product

of the manufacturer listed, nor is it intended to imply that L&M Truck Parts Limited is an authorized source for any of the manufacturers

listed in this brochure.

DOWN TIME IS EXPENSIVE.And when you don’t have the parts you need, you’re losing a lot of time andtoo much money. That’s why, atL&M Powertrain Parts, we’redriven to serve you better. Withhigh-quality transmission,torque converter, differentialand planetary axle parts,where and when you needthem.

Axletech • Clark • Dana • Eaton Rockwell • Spicer • Tractech

WWW.LMPOWERTRAINPARTS.COM

ATLAS COPCO DUX EIMCO GHH MTI TAMROCK TORO VOLVO WAGNER

Mining Ad Double- Dovetail:Layout 1 9/24/07 3:59 PM Page 1

6 Camese Compendium of Canadian Mining Suppliers www.camese.org

CAMESE Special Feature

Goodwill ambassador for Canada’s mining suppliers

To those who have worked with Jon Baird at the Canadian Association of Mining Equipment and Services for Export (CAMESE), it was no surprise

when he was awarded the 2013 VALE MEDAL.

“In simple terms, CAMESE is the organization it is today due to the efforts and dedication of Jon Baird,” says Alan French, the 2009-2010 president of CAMESE. “I have known Jon for many years, both before and during his leadership of CAMESE. The citation says it all. Many others have contributed but none as much as Jon.”

Ross Lawrence explains the specific challenge facing Jon when he became managing director of CAMESE in 1993. “The organization was, for all practical purposes, bankrupt. The membership was minimal, and the bank account was close to zero.”

“Jon set as his first priority increasing membership significantly,” says Ross, an honourary member who served the association as its president from 1989 to 2008.

Within a year or so, CAMESE was back on a sustainable track. This was Jon’s major accomplishment – without which there would be no CAMESE today.

During the more than 20 years Jon has been CAMESE’s Managing Director, the association’s membership has risen tenfold. This has significantly impacted the organization’s

On May 6, 2013, the Canadian Institute of Mining (CIM) awarded Jon Baird the VALE MEDAL at its annual conference in Toronto. This honour recognizes the person who has made a meritorious and practical contribution of outstanding importance to the mining and metallurgical industry of Canada. In explaining why Jon was chosen to receive the Vale Medal, the CIM’s Executive Director Jean Vavrek said, “It’s not something we award lightly. Role models, like Jon Baird, are important because sharing their story motivates emerging leaders in what they can also achieve.” (News, CIM Archive)

By Bonnie Toews, Managing Editor for CAMESE’s Web Content and Annual Compendium

ability to provide member support, notes Ross. “Programs have expanded, relations with governments have improved and staff expanded to serve the members.”

What makes this man stand out and how did his life become so entwined with the mining industry? The answer starts at an early age.

As a young man, Jon loved camping in the outdoors and his fascination with rocks grew from his admiration of a family friend whose career was in geology. Shortly after he graduated from the University of Toronto as a geophysicist in 1964, Jon began his mining career working for Scintrex Limited, a Toronto-based consultant and manufacturer of instrumentation used in mineral

exploration and other applications. It was here he discovered his talent for communication and achieving consensus when he switched to marketing and selling Scintrex’ products and services.

On a 1980’s trip to investigate the Soviet Union’s capabilities in mineral exploration not previously known in the west, Jon learned how effective joint ventures could be. He found available technology and Scintrex assigned him to raise funds from 10 Canadian mining companies to implement the project in Eastern Canada.

“The challenge was getting 10 companies to sign the same contract. Each representative had his own ideas about what the contract should be,” says Jon.

On March 5, 2013, Jon also received the Queen Elizabeth II Diamond Jubilee Medal for his contribution to Canada’s mining industry from the PDAC at its annual convention in the Royal York Hotel . He was presented the medal by his alter twin, The Honourable John Baird, Minister of Foreign Affairs .

Camese Compendium of Canadian Mining Suppliers www.camese.org 7

CAMESE Special Feature

Consulting engineering

specializing in mining

solutions, backfill, and

tailings management.

Worldwide expertise

705-523-1040 | www.koviteng.comFOR CAREER OPPORTUNITIES

visit our website

powering

INNOVATIVEPRACTICAL SOLUTIONS

THOUGHT

This experience shaped his vision for CAMESE and the association’s role in Canada’s mining community. If CAMESE could develop a collective marketing strategy for Canadian mining suppliers, Jon reasoned, they could create top demand for their products, professional expertise and services on world markets.

“We needed a collective approach to getting Research and Development to create the innovation necessary. I have always believed CAMESE’s best contribution is in the commercialization of the innovation achieved,” he says.

To do this effectively, Jon allied CAMESE with other mining associations – CIM, the Mining Association of Canada (MAC) and the Prospectors and Developers Association of Canada (PDAC). He wrote a column for the CIM magazine – for and about the supply side of the mining industry – that emphasized the need for a collective approach to marketing.

Continually reaching out to the mining community, Jon became a founding member of the Canadian Mining Innovation Council (CMIC) and served as its treasurer and made significant contributions to the development of CMIC by-laws and government policies. A faithful board member of the PDAC since 1995, he has also held the position of the organization’s president from 2008 to 2010. In these roles, he has promoted knowledge sharing – the

natural partnering opportunities linking the mining industry – and informed the public about the benefits of the mining industry and its job opportunities to decision makers.

Since the start, Jon’s mission has been to get the mining industry to understand the mutual benefits of working together both at home and abroad. His career has taken him to 71 countries and helped him add five languages (French, German, Swiss-German, Spanish and Russian) to his repertoire.

CAMESE’s current president, Derek Lawrence, says the association is proud to recognize Jon Baird’s service to the mining world.

“As managing director of CAMESE, Jon’s vast and encyclopedic networking, his powers of personal persuasion and encouragement have helped firms across Canada, large and small, to realize their potential in supplying goods and services to the global mining industry. Jon is a champion of the Canadian mining industry in general and CAMESE in particular.”

In accepting both the Vale Medal and the Queen Elizabeth II Diamond Jubilee Medal awards, Jon acknowledges that his accomplishments in his 20 years at CAMESE have only been possible because of loyal support from the association’s staff, board members, member firms, government and his wife, Martha.


CAMESE 2013/2014 Subsector Index

ANALYTICAL LABORATORIES & SUPPLIESGeochemical, ore, process and environmental sample analysis; umpire assay services; laboratory equipment; density measurements; conductivity measurements; susceptibility; IP/resistivity .

18 Accurassay Laboratories Exceptional service. Expert analysis

18 Activation Laboratories Ltd. High quality innovative geochemistry for

mineral research and exploration

19 GENEQ Inc. Canadian supplier of mining laboratory equipment,

GPS/GNSS systems and environmental equipment

19 Laval Lab Inc. Leading supplier of laboratory and pilot plant

equipment for the mining industry

19 Sight Power Inc. Leading provider of underground data-modeling

systems and technology solutions

ASSET LIQUIDATION CONSULTANTSAsset evaluations for pricing, surplus asset sales, mine closure equipment liquidations, used equipment sales .

20 CDC Export Asset appraisals and purchase whole asset;

dismantling for mine closure and transport

20 The Mackwood Group of Companies Ltd. Asset appraisals, mine closure liquidations and equipment sales

ASSOCIATIONSActivities of national, provincial and regional trade associations for the Canadian mining industry .

21 Canadian Institute of Mining, Metallurgy and Petroleum (CIM)

Leading technical society of professionals in the Canadian minerals, metals and energy industries

22 Greater Sudbury Development Corporation Building economic development partnerships for

the City of Greater Sudbury mining community

22 Mining Association of Canada (MAC) National association of the mining industry

23 Mining Suppliers’ Association of B.C. (MSABC)

Advocacy group representing the mining industry’s economic contribution to B.C.

23 Prospectors and Developers Association of Canada (PDAC)

National association representing the interests of the mineral exploration and development industry in Canada and abroad

This index is a compilation of profiles describing all CAMESE members’ activities and capabilities. For ease of reference, members’ profiles are organized under the mining industry subsectors they supply or serve.

AUTOMATION & COMMUNICATIONSExpertise, equipment and technology for process and machinery automation; business intelligence tools; robotics; underground and surface communications; vehicle automation, monitoring and safety .

26 Festo Inc. A worldwide leader in pneumatic and electrical automation technology

24 Hepburn Engineering Inc. Complete hoisting systems, electrical controls, software and automation –

Hoist rebuilds, controls upgrades, inspections and service for all hoists

25 HARD-LINE Provides industrial robotic control systems and

mine-wide tracking communications

25 Laird Technologies A world leader in underground communications and radio

remote control systems and related products for underground mining

27 Northern Light Technologies Inc. (NLT) Best-in-class communications and lighting solutions that

set the standard for optimum safety and productivity

26 Penguin Automated Systems Inc. Committed to the development and commercialization

of tele-operation and mine-automation solutions

27 PBE – Pyott Boone Electronics Canada Limited (formerly MRS)

Formerly Mine Radio Systems (MRS)

28 Rockwell Automation Automated solutions to advance process control,

safety systems and energy management

28 SNL Metals Economics Group Making smarter decisions with greater in-depth data and research online

28 SolidCAD Solutions Leveraging information technology to revolutionize workflow

29 Wainbee Limited One of Canada’s leading providers of technical and supply-chain solutions

for automation and control

BLASTING EQUIPMENT & SERvICES Explosives manufacturing systems, blast-monitoring analysis equipment and consulting; blast-hole bits .

31 Instantel The world’s most trusted vibration and

overpressure monitoring equipment



BUILDINGS, PORTABLETurnkey camp rental, structures for housing, storage and many other applications .

29 BriteSpan Building Systems Inc. Providing fabric building solutions since 1995

31 Future Buildings Prefabricated steel buildings that are compliant with Canadian Welding

Bureau and CAN/CSA A660 certification guidelines to guarantee you quality workmanship at factory-direct prices

30 Norseman Structures Providing alternative building solutions for mining operations

30 Sprung Instant Structures Ltd. High-performance fabric structures

31 Weatherhaven Proven expertise in re-deployable shelter systems

BULk MATERIAL HANDLING EQUIPMENT, SYSTEMS & ENGINEERING SERvICESComponents, equipment, engineering design and consulting services for moving bulk materials including fabricators of skips, cages, loaders, unloaders, mine-cars, rock breakers, samplers, conveyor systems, rollers, idlers, pulleys, vulcanizers, mixers, filters, speed reducers, gear-motors; stackers, reclaimers, grizzlies, chutes, chute loading systems, slusher hoists, tramp-metal detectors, belt-rip detection systems, drive-control systems, abrasion-resistant piping, castings and gears .

33 Aran International Ltd. Master supplier of high-performance mixing

plants for mining projects around the world

32 B.I.D. Bulk Material Handling Systems Custom bulk material handling solutions and equipment since 1981

34 BTI (Breaker Technology Ltd.) Specialists in custom-engineered mining equipment

33 Canadian Wear Technologies Wear solutions for critical and severe

applications in material handling systems

35 Conveyors Plus Manufacturer of most cost-effective Sure Align

Tracker belt conveyor alignment system

35 Falco Technologies Inc. Your one-stop for process engineering/stainless

steel and specialty alloys equipment

36 Hazeland Manufacturing Inc. Your best choice for equipment solutions

that include parts and service support

34 Industrial Equipment Manufacturing Ltd. Bulk materials handling equipment experts since 1953

36 Luff Industries Ltd. Conveying performance

37 Mecanicad Inc. Plastic specialists servicing the mining industry

37 Multicrete Systems Inc. Your one-stop source for shotcrete-concrete-grout-equipment solutions

38 Shaw Almex Industries Limited World leader in conveyor-belt vulcanizing and repair equipment

38 Standard Machine Precision solutions

35 StonCor Group Single source for all your flooring, coating, lining, fireproofing,

fiberglass (FRP) grating and structural system requirements

37 veyance Technologies Canada, Inc. International supplier of Goodyear Engineered

Products’ complete family of products

CAMERA SYSTEMS, MOBILEThermal night vision cameras, no-drill laptop mounts, remote-control floodlights, side-view cameras, back-up cameras, video accident recorders; truck video products; digital incident/accident recording systems; rear-view video systems; submersible lamps; emergency lighting, warning lights, D .O .T . lighting, back-up cameras, reversing aids .

39 Motion Metrics International Corp. Advanced monitoring systems for open-pit mining

39 PROvIX Inc. (Division of Winsted Group Inc.) Supplier of vision enhancement solutions to mines around the world

CAMP MANAGEMENT SERvICES AND SUPPLIESRemote site catering and camp management services; materials handling, facilities and systems management; liquid logistics, remote-site storage tanks for water and fuel .

40 Black Diamond Group Limited Fastest growing modular building, remote

lodging and energy-services company in North America

COMPRESSORS, AIRScrew and reciprocating compressor packages .

40 Airworks Compressors Corp. Makers of the next generation of mobile air compressor systems

CONSULTING GEOLOGISTS & ENGINEERSServices in geology, project development, ore reserve estimation, feasibility studies; due diligence, project monitoring, failure analysis, engineering for mining, metallurgy, mechanical, civil, electrical, geotechnical; turnkey contracting, research and development .

42 A.C.A. Howe International Limited Geological and mining consulting services

for exploration and development around the world

42 Centre for Excellence in Mining Innovation (CEMI)

Poised to be the world’s leading mining research centre

42 DRA Americas Inc. International leaders in the design and

construction of mineral processing plants

43 Golder Associates Ltd. Globally integrated company providing consulting, design, and

construction services in earth, environmental and related areas of energy

43 kovit Engineering Making mining better with simple innovative solutions that work



41 Lassing Dibben Consulting Engineers Ltd. Providers of innovative engineering solutions

for bulk material handling systems worldwide

44 Met-Chem Canada Inc. Internationally renowned consulting engineering

company with a full range of technical services

44 Norwest Corporation Employee-owned energy, mining and environmental consulting company

45 Piteau Associates Meeting your geotechnical, hydrogeological and environmental

engineering challenges worldwide for more than 35 years

45 Snowden Mining Industry Consultants Inc. Professional services from internationally renowned experts

CORPORATE SOCIAL RESPONSIBILITYCompanies have a responsibility to provide principles and performance guidelines that respect all stakeholders equally within the corporate framework including employees, customers, local communities and shareholders .

46 Cowater International Inc. CSR-related services in developing countries

46 PDAC – e3Plus: A Framework for Responsible Exploration

A CSR Initiative of the PDAC

DIESEL ENGINES & ACCESSORIES Exhaust insulation .

47 Firwin Corp. Covering your exhaust insulation needs

DOORSDoors for mining and plant applications .

47 TNR Industrial Doors Canadian-based manufacturer of special

high-performance and rubber doors

DRILLING CONTRACT SERvICES Diamond core, rotary, reverse circulation, raising, surface and underground contract drilling services .

48 Energold Drilling Group Environmentally sensitive innovations in specialized drilling

48 Major Drilling Group International Inc. One of the world’s largest drilling service companies,

focusing on quality, relationships and results

DRILLING EQUIPMENT & SUPPLIES Drilling underground and surface: hydraulic, pneumatic, reverse circulation, in-the-hole drills, jumbos, raise-boring equipment; auger drilling rods, drill steel and parts, hammers, diamond and button bits, drill fluids, pump systems, carbide bit re-furbishing, seals, wire-line accessories .

50 Atlas Copco Exploration Products Manufactures diamond-core drilling equipment

and develops mineral exploration solutions

49 BBS Exploration, a division of THE PRITCHARD GROUP

Your complete solution provider for all your exploration requirements

50 Canun International Pneumatic rock drills by Canun where product quality equals productivity

51 Control Chemical (1989) Corporation MATEX: Leader in environmentally safe drilling fluids and lubricants

51 Dimatec Inc. Diamond drilling tools and precision machining

52 Foremost Manufacturer of mining and mineral

exploration drills, tooling and accessories

53 Hayden Diamond Bit Industries Ltd. Designs and manufactures diamond impregnated

drill and coring bits for the mining industry

56 Mansour Mining Technologies International Inc.

Market-leading manufacturer of integrated mining supply products

53 MAXIDRILL Inc. Manufacturers of customized and unique

drill rigs made today for tomorrow

50 Mincon Mining Equipment Inc. Major manufacturer of pneumatic and hydraulic rock

drills and supplier of high-quality replacement parts for drills

54 Mining Technologies International Inc. (MTI) Manufactures and supplies advanced and custom-made

mining equipment for surface and underground operations

52 MPX Drilling Systems A division of Talos Steel Ltd.

55 Multi-Power Products Ltd. Providing high-performance, high-quality

and high-value drilling equipment

54 Parts HeadQuarters Inc. One-site shopping for pneumatic and gasoline-driven

diamond drills, percussion rock drills, and replacement parts

56 PRINOTH Ltd. The world’s leading supplier of low-ground pressure track vehicles

57 Safari Diamond Bits Ltd. Specialists in customized drill-bit production

57 Western Drilling Tools Inc. Drilling tools, supplies, machining and repair to meet your mining needs



ELECTRIC POWER EQUIPMENT Electrical components and management tools, power resistors, power cables, power-cable couplers, ground-fault protection systems, electric drive raise climbers, ruggedized equipment, starters, high voltage equipment, switchgear, electric generators, batteries .

59 Arkbro Industries Raise climbers and other equipment for raise mining,

horizontal drifts and tunnels, and inclined and vertical shafts

59 ECS Electrical Cable Supply Ltd. Hooking you up to the best wire and cable solutions

58 Mine Cable Services Corporation Designers and manufacturers of high voltage cable connection

systems, cable-repair equipment and cable handling systems

59 Patton & Cooke Co. Medium-voltage cable couplers and power distribution

systems: customer-designed, quality built and globally supported

60 Staticon Ltd. Established provider of DC and AC power supply solutions . . . by design

60 Unit Electrical Engineering Ltd. Produces custom-designed power cable coupling systems and complete

modular electrical rooms

ENGINEERING CONTRACTORSEngineering, procurement, construction and management services .

60 EDC Mining Ltd. Providing engineering solutions and

professional supervision to ensure success

ENvIRONMENTAL EQUIPMENT & SERvICESInformation, professional services and technologies covering environmental science, planning and engineering for mines and processing; treatment of sewage and acid mine effluents; mine closure services, engine emissions control, water treatment equipment and services; wastewater treatment, environmentally sound exploration practices; portable storage systems; liquid logistics; on-site storage tanks for water and fuel; pest control; secondary containment for hazardous fluids re: military and commercial .

62 BIODISk Corporation Packaged wastewater treatment solutions worldwide

63 BluMetric Environmental (formerly Seprotech Systems)

Manufacturer of packaged wastewater treatment plants for mining camps around the world

61 Canada North Environmental Services (CanNorth)

High-quality, cost-effective environmental services for mining developments

62 Cypher Environmental Ltd. Certified and proven environmental mining solutions

that solve dust and haul-road construction problems

66 GENEQ Inc. Canadian supplier of mining laboratory equipment,

GPS/GNSS systems and environmental equipment

64 Hazeland Manufacturing Inc. Your best choice for equipment solutions that

include parts and service support

65 IC Controls Water Analysis Equipment – Specializing in rugged

pH sensors for the mining environment

65 SEI Industries Ltd. Engineers remote-site liquid logistics and environmental solutions

64 Simpson Environmental Corp. Systems integrator for water treatment technologies

66 Solmax International Inc. Manufacturing environmental solutions for

containment and fluid transport

66 STT Stanco Engineered dry bulk chemical and lime slurry

systems for mining processes and water treatment

EQUIPMENT MAINTENANCE & REPAIR Solutions to unique maintenance and repair problems, filtration, rebuilds, portable align-boring machines, abrasion-resistant steel, blades, wear studs, plastic components, abrasion- and corrosion-resistant coatings, rewinds and repairs to motors, repairs and replacements for bushings, wear-plate impact pads and lining materials, jacks, welding supplies, ground engaging tools, tires .

68 A.L. Sims & Son Ltd. Equipment sales, rentals, parts and repair

68 Global Inspections-NDT, Inc. Leader in advanced NDT techniques

68 Moventas Ltd. Worldwide wind and industrial gear manufacturer and service provider

67 Normac Adhesive Products Inc. Protecting the future today with

high-performance urethane coating systems

69 Rector Machine Works Ltd. Customized solutions for your competitive advantage

69 valley Blades Limited Using computer-assisted technology, manufactures

replacement wearing edges for earth and snow-removal equipment

FINANCE CONSULTANTS & SERvICES Services including financing, banking, tariffs, overseas fees, e-commerce trade, international investments and loans, taxes, accounting or tax preparation software, contract support and customs documentation .

70 Export Development Canada (EDC) Government export credit agency to help

Canadian mining suppliers develop international business

70 Mercantile Exchange World’s most trusted and reliable global currency specialists



FUEL TRANSPORTATION & STORAGE EQUIPMENTFuel and liquid-handling equipment and services .

71 Greatario Engineered Storage Systems Market leader for liquid storage tanks and covers in eastern Canada

71 SEI Industries Ltd. Engineers remote-site liquid logistics and environmental solutions

GEOPHYSICAL INSTRUMENTATIONAirborne, surface and borehole instrumentation for mineral exploration and other applications, including electromagnetics, magnetics, magnetotellurics, induced polarization, seismic, surveying .

72 AGCOS Inc. Supplier of multifunction geophysical ground and

marine EM data acquisition systems and accessories

72 Crone Geophysics & Exploration Ltd. Explore deeper and smarter with 3D Pulse EM

73 GEM Systems Inc. Advancing Overhauser, Potassium and Proton Precession

magnetometer technologies for more than a Quarter Century

73 Geonics Limited The world leader in electromagnetic geophysical

instrumentation for exploration and the environment

72 IFG Corporation Quality geophysical Instrumentation since 1979

74 Instrumentation GDD Inc. A reliable manufacturer of leading-edge instrumentation for IP and EM

surveys, IP resistivity meters for core samples, conductivity and magnetic susceptibility meters and leveling systems for gravity

74 Phoenix Geophysics Ltd. Save money – Focus your drilling with geophysics

GEOPHYSICAL SURvEYS & CONSULTING Ground, airborne and borehole geophysical survey contractors and consultants for mineral exploration and mapping; compilation, processing, enhancement and interpretation of data; software for geophysical interpretation .

76 Abitibi Geophysics Inc. Let Abitibi help you find a mine

76 AGCOS Inc. Supplier of multifunction geophysical ground and

marine EM data acquisition systems and accessories

75 Crone Geophysics & Exploration Ltd. Explore deeper and smarter with 3D Pulse EM

75 Sander Geophysics Ltd. (SGL) High-resolution airborne surveys

GROUND CONTROL EQUIPMENT & SUPPLIESEquipment, supplies and applicators for grouting, shotcrete, abrasion-resistant piping, paste backfill, rock bolting, seismic monitoring and geotechnical instrumentation .

77 ConMICO Inc. Ground support systems you can build on

77 Mansour Mining Technolgies Inc. Market-leading manufacturer of integrated mining supply products

77 Multiurethanes Grouting professionals – water control for underground mines

HOISTING EQUIPMENT & ACCESSORIES Services for the design, supply, upgrading and refurbishment of mine hoists, rack and pinion hoists, winches, tuggers, sheaves, slushers, wire rope and wire-rope testing equipment .

78 Hepburn Engineering Inc. Complete hoisting systems, electrical controls, software and automation –

Hoist rebuilds, controls upgrades, inspections and service for all hoists

78 Horne Conveyance Safety Ltd. Cost-effective engineering solutions for the safe

use of conveyance systems underground

79 Rotesco Inc. World leader in the non-destructive testing of steel wire ropes

HYDRAULIC COMPONENTS & ACCESSORIESFluid and filtration products .

80 Lynch Fluid Controls Inc. Customized solutions for hydraulic motion-control manifolds and

integrated hydraulic systems

80 Parker Canada Division World’s leading diversified manufacturer of motion and control technologies

INFORMATION & MARkETING SERvICES Services including advertising, e-commerce, mining sector information, marketing, corporate image development, print and electronic publishing, and trade show exhibitions .

81 Canadian Mining Journal Providing quality editorial and in-depth coverage

on topics that matter for more than 130 years

81 InfoMine Worldwide mining portal site and business centre on the Internet

82 Signature Group Inc. Creative solutions for your brand image

82 The Northern Miner The “Bible” of the mining industry

INSURANCE CONSULTANTS AND SERvICES Services including life, group and business insurance, classes of executive and business risk insurance, product and cargo risk management, specialized solutions peculiar to mining industry needs .

83 Hallmark Insurance Brokers Ltd. Comprehensive solutions to manage your total cost of risk



LIQUID HEATINGSubmerged combustion liquid-heating systems; mineral processing liquid-heating systems .

79 Inproheat Industries Ltd./SubCom Offers SubCom, the ultimate solution for heating or

evaporating difficult-to-heat liquids with maximal energy efficiency and minimal maintenance and supervision

MANAGEMENT CONSULTING SERvICES Consultation on social aspects of mining development; mineral policy and mining legislation; mineral resource data management; human resource management; employee search and selection; intellectual property protection, representation services .

84 C.J. Stafford & Associates International search/recruitment specialists to the mining, metals and

minerals industries with ‘Alliance’ partners in Australia, Chile, Peru, South Africa, U.K. and U.S.A.

84 EDC Mining Ltd. Providing engineering solutions and professional

supervision to ensure success

84 Global Partner Solutions Mining and Industries Inc.

Proven Project Procurement Management Service

85 Praetorian Construction Management Specialists in construction management with expertise in large-scale

earthworks, mining and multi-discipline heavy industrial projects

MAPPING SERvICESDigital topographic and orthophoto mapping; geomatics; land surveying; GPS surveying, satellite image .

86 Eagle Mapping Ltd. Globally delivering customized, high-quality

LiDAR data, digital mapping and imagery

86 Effigis Geo-Solutions Inc. (vIASAT) Experts in geospatial solutions for the mining industry

MINE MAINTENANCE, REPAIR & OPERATION TOOLS OR SUPPLIESAny sort of mechanical, plumbing or electrical device that if out of order or broken requires fixing with the applicable tools or supplies .

83 Checkfluid Inc. First step in oil analysis sampling



MINE SITE CONSTRUCTIONVarious equipment and components, including wood, steel and high-density polyethylene construction products, corrugated metal construction, land surveying .

87 AIL MINING Advanced engineering solutions in corrugated metal

87 Aran International Ltd. Master supplier of high-performance mixing

plants for mining projects around the world

88 Armtec Limited Partnership Manufacturer and distributor of steel and high-density polyethylene

construction products for use in the civil engineering market

89 Praetorian Construction Management Specialists in construction management with expertise in large-scale

earthworks, mining and multi-discipline heavy industrial projects

MINERAL PROCESSING EQUIPMENT & SUPPLIES Crushers and parts, grinders, ore-processing plants, electrical motors, grinding rod, mill liners, process heating equipment, centrifugal concentrators, wet and dry process filtration, electrolytic cells, process control samplers, retorts, grizzlies, screens, pumps, pump parts, castings and assemblies, clarifiers, samplers, mixers, dryers, filters, agglomerators, cyclones, gears, ceramic corrosion-resistant lining systems, rubber products such as abrasion-resistant liners, corrosion-control coatings, pinch valves, hoses and expansion joints, rubber components, fibreglass reinforced parts such as pipe, grating and solvent-extraction systems, abrasion-resistant piping, remanufactured and used equipment .

93 Abresist kalenborn Inc. Intelligent solutions for all types of wear problems

92 American Biltrite Premium abrasion-resistant rubber for total protection

92 Bradken Mill Liners Providing premium grinding mill liners and mill-liner systems

91 Canadian Wear Technologies Wear solutions for critical and severe applications

in material handling systems

93 Fabrithane Industrial Products Inc. Manufacturer of cast-urethane wear parts

91 Fournier Industries Inc. A leader in mining industry from design and

detailed engineering to field installation

94 Hayward Gordon Ltd. A leader in the manufacture of process solutions since 1952

90 Heath & Sherwood Provides a complete line of standard and custom-designed sampling systems,

together with a complete package of on-line XRF analysis you can trust

95 kPM Ltd. Abrasive pumping at half the cost

95 Major Wire Industries Limited Innovative screen media solutions to maximize production

96 McCloskey International Ltd. Manufacturers of portable crushers, screeners and conveyors


96 Megatraction Equipment Inc. Specialized production equipment to reduce your operation costs

93 Montreal Tractor Inc. Produces MONTRAC crushing systems

94 NovaFlex Group Offers ultimate hose and connector solutions for piping failures

97 Polycorp Ltd. Engineered rubber liners for all grinding mill applications

98 Precisioneering Ltd. Precision-engineered, long-lasting, corrosion-proof

fibreglass products for mineral processing

97 PR Engineering Limited Your crusher specialist (new and reconditioned) since 1965

98 Rahnmet, The Crusher Specialists Sole North American manufacturer of both steel

components and bronze-wear parts


99 Tega Industries Canada Inc. Total solution provider to your problems of

wear and abrasion when separating ores

100 Titan Process Equipment Ltd. From laboratory to production, get the equipment you need

98 Tramac Equipment Ltd. Supplier of stationary rock breaker systems and hydraulic attachments

100 Westpro Machinery Inc. Produces quality machinery parts for any

destination in the world on time and cost effectively

MINERAL PROCESSING – PUMPS, PIPES & vALvESAbrasion resistant pipe, high density polyethylene pipe and fittings .

101 kPM Ltd. Abrasive pumping at half the cost

101 Technosub The fastest way to effective mining pumps and dewatering solutions

MINERAL PROCESSING SERvICESProcess engineering; mineral processing, hydrometallurgical, pyrometallurgical and refining design and testing; crusher refurbishment; flow sheet development; pilot plants; new, remanufactured and custom-designed equipment for mineral processing .

102 COREM Research consortium of mining companies

for the optimization of mineral-dressing processes

103 DRA Americas Inc. International leaders in the design and

construction of mineral processing plants

103 MineSense™ Technologies Ltd. Mine-Mill Integration: making hard-rock mines more profitable

103 Pultrusion Technique Inc. Innovative solutions in composite engineering



MINING ENGINEERING & CONTRACTING Contract services for shaft sinking, raise boring, mine development and mining; engineering services, including mining, metallurgical, mechanical, civil, electrical and geotechnical; turnkey contracting; ground control; construction services; surveying .

104 DMC Mining Services Premier supplier of services and solutions to the mining industry

104 Hatch One of the world’s largest engineering, procurement and construction

management firms – serving global organizations in the mining, metals, energy and infrastructure sectors

MINING INSTRUMENTATIONControl and monitoring instrumentation, airflow monitoring; laser alignment, cavity monitoring, tramp metal detection, drill-hole surveying, gas and environmental monitoring, geotechnical monitoring .

106 Geosight Inc. Cavity monitoring and scanning systems

105 Marland Enterprises Inc. Fast payback alignment lasers for underground mining and tunneling

107 Optech Incorporated World leader in advanced lidar and camera instruments

106 Rapiscan Systems More than 40 years’ experience in metal

detection and measuring magnetic components

107 RST Instruments Ltd. Offers high-quality geotechnical instruments, at a reasonable cost

108 Sight Power Inc. Leading provider of underground data-modeling

systems and technology solutions

PACkAGING SERvICESServices including design and manufacturing of packaging, crating export packaging, tracking, vacuum sealing cargo, packaging dangerous goods, loading containers, as well as project management and warehousing .

109 Emballage Montreal Express Inc. Crating and export packaging specialists for oversized or heavy-lift cargo

108 North American Crating Inc. Custom crating by people who care for your business

109 Topax Export Packaging Systems Protecting your assets from the hazards of transportation

and long-term storage

RADIO FREQUENCY IDENTIFICATION Wireless communications technologies for successful RFID (radio frequency identification) chip applications .

110 PBE (Pyott Boone Electronics Canada Ltd.) Formerly Mine Radio Systems (MRS)

SAFETY & HEALTHHealth and safety supplies, footwear, cap lamps, communications and charging systems, protection systems integration, warning systems, worker-protection systems and components; health risk management and environmental disease detection .

111 Alliance Mercantile (1958) Inc. Wear “Viking” gear with its 100% waterproof

guarantee for all your safety needs

111 International SOS World’s leading provider of international medical assistance, healthcare

and security services

111 L.P. Royer Inc. Safety footwear protection since 1934

112 Northern Light Technologies Inc. (NLT) Best-in-class communications and lighting solutions that set the standard

for optimum safety and productivity

SMELTING & REFINING EQUIPMENT & SERvICESProcess consultants; copper electro-winning equipment; material handling equipment; automation services; insulators for hydrometallurgical refining industry, Tuyere punchers; insulators .

112 EPCM Services Ltd. Dominant global supplier of cathode manufacturing and

tankhouse handling equipment for the electrorefining and electrowinning of copper and other base metals

113 Heath & Sherwood Tuyere Line management products...Your smelter’s

path to increased copper/nickel production

113 kubes Steel Inc. Where metal takes shape


SOFTWAREManagement, processing, analysis, display and presentation of exploration, mining, geomechanics, process and environmental data; ore reserve calculations; mine-wide information systems, process control and optimization; mine planning, GIS; training; laboratory information systems; hardware and business software, information technology systems .

116 AssayNet Canada Inc. Solutions for automated information systems

115 COGEP Inc. Experts in maintenance management solutions featuring

their flagship software Guide Ti

116 Dassault Systèmes GEOvIA Inc. Mining software and solutions

116 Geosoft Inc. World leader in software and solutions for earth exploration

117 ThreeDify Inc. Providing robust, scalable and easy-to-use

geological and mining software solutions



TRANSPORTATION & LOGISTICS SERvICE PROvIDERSServices including customs documentation, shipping, materials handling, document preparation and cargo tracking, logistics software, export packaging, logistics, transportation, supply chain management, freight forwarding, third-party contract charters for air/sea, transportation management, risk management and heavy lift .

127 Axxess International Inc. Best solutions for your importing and exporting

needs anywhere in the world

126 Bellville Rodair International (BRI) Specialists in handling and transporting heavy-lift cargo to and from

mining projects around the world

128 Branson International Incorporated International air and ocean specialists in exporting and importing mining

project cargo worldwide

127 Cole International Inc. Provides customs brokerage, transportation/warehousing, consulting

128 DHL Global Forwarding (Canada) Inc. The Logistics company for the world

129 ITN Logistics Group Creating unique transportation and logistics solutions for the mining

industry worldwide

129 Manitoulin Group of Companies Strengthen your supply chain with the Manitoulin network

TRANSPORTATION EQUIPMENT, ACCESSORIES & SERvICES Rail car covers, flat cars, highway trailers, tracked vehicles, intermodal equipment and containers, trucking and intermodal haulage, bulk handling .

130 Ecofab Maintenance Ltd. Provides worldwide railcar cover solutions


SURFACE MOBILE EQUIPMENT & COMPONENTSNew and used surface mining machinery, dumpers, pins and bushings, engine cooling fans, climate control systems, haulers, hydraulic seals, pistons, pumps and bearings, wheels, rims, tires, tire handlers and manipulators, machinery parts and attachments, braking resistors, brake systems, clutch systems, cable reelers, dozer blades, buckets; gears; used and reconditioned equipment .

118 ARGO Ontario Drive & Gear Ltd. Extreme off-road performance

119 CWS Industries (Mfg.) Corp. World leader in attachments for the mining industry

120 Gridcom Enterprises Ltd. Supplier of braking resistors and parts for

off-road electric trucks and loaders

120 Hazeland Manufacturing Inc. Your best choice for equipment solutions

that include parts and service support/

121 Hercules Equipment Ltd. Built tough and designed to perform

119 Mobile Parts Inc. Your parts and brake specialist for Tamrock, Wagner, Toyota,

Getman, Minejack, Eimco, Jarvis, Clark, Toro, JCI and others

121 Morgan Industrial Supply Ltd. Complete selection of industrial brake and

clutch components for mining equipment

122 ORO Design & Manufacturing Ltd. Mobile service equipment

123 Polar Mobility Research Ltd. Specialists in heavy-duty HVAC systems for mining

operations in extreme climates and hazardous environments


122 Reliable Wheel Products Ltd. Providing you with the products you need to make

maintenance of heavy equipment easy and safe

124 Rimex Supply Ltd. Building better wheels

124 valley Blades Limited Using computer-assisted technology, manufactures replacement

wearing edges for earth and snow removal equipment

124 veyance Technologies Canada, Inc. International supplier of Goodyear Engineered

Product’s complete family of products

125 vintech Ltd. Supplier of mining shovel parts, brake assemblies, flocculants and

environmentally friendly mineral-flotation and coal-preparation reagents

CAMESE 2013/2014



138 Nelmaco Eastern Ltd. Canadian-owned manufacturer of

JOY (OEM) air and electric slusher units

138 Nordic Minesteel Technologies (NMT) Excellence that goes Deeper

139 Polar Mobility Research Ltd. Specialists in heavy-duty HVAC systems for mining

operations in extreme climates and hazardous environments

137 RDH Mining Equipment OEM Underground mining and tunneling equipment specialists

139 Wabi Iron & Steel Corp. Custom fabrication and casting solutions for the mining industry

vENTILATION EQUIPMENT & COMPONENTSVentilation fans; flexible ducting and accessories; airflow metering systems, gas sensors, venting systems .

140 ABC ventilation Systems Customized ISO 9001 quality assured

ventilation systems to fit your underground needs

140 Accutron Instruments Inc. Mine/industrial ventilation monitoring, improving

air quality and lowering costs with vent-on-demand

142 Maestro Mine ventilation Top quality underground ventilation systems that

save lives, increase production and conserve energy



141 Rocvent Inc. Engineered ventilation ducting of all types

WATER TREATMENT EQUIPMENT & SERvICESTechnologies for acid mine drainage treatment, water purification, waste water treatment . .

142 IC Controls Water Analysis Equipment – Specializing in

rugged pH sensors for the mining environment

UNDERGROUND vEHICLES, EQUIPMENT & COMPONENTSNew and used underground mining equipment; diesel engines, wheels, rims, tires, tire manipulators, rack and pinion hoists, machinery parts and attachments, including power train components, buckets, tanks, hydraulic seals, gears, castings, braking system, wear products, electrical and automation systems, mobile service equipment .

132 Arkbro Industries Raise climbers and other equipment for raise mining,

horizontal drifts and tunnels and inclined and vertical shafts

133 BPT Components & Parts Inc. Clark parts and components for underground mining equipment

131 BTI (Breaker Technology Ltd.) Specialists in custom-engineered mining equipment

132 Dux Machinery Corporation Underground mining equipment worldwide

134 Gladiator Equipment Inc. Providing mining equipment solutions, sales,

service, parts and components

134 Hazeland Manufacturing Inc. Your best choice for equipment solutions that

include parts and service support

135 Industrial Fabrication Inc. Multi-purpose utility vehicles that improve your safety and productivity

132 L&M Powertrain Parts Powertrain parts, the drive to serve you better

136 MacLean Engineering A world-class manufacturer of mobile underground

mining equipment and product support services

135 Marcotte Mining Machinery Services Inc. Innovative, low-cost, long-life, engineered vehicle solutions


137 Miller Technology Inc. Renowned for innovative design and production of custom utility vehicles

for underground mining

136 Mobile Parts Inc. Your parts and brake specialist for Tamrock, Wagner, Toyota,

Getman, Minejack, Eimco, Jarvis, Clark, Toro, JCI and others

18 Camese CompendiumofCanadianMiningSuppliers www.camese.org

Accurassay Laboratories, through its focus on operational excellence, provides industry-leading turnaround time and service reliability to the mining and mineral exploration industry. Their newest division, Accurassay OnSite, is designed to provide customized lab operations right at the customer site. Accurassay Laboratories has designed its processes to quickly prep and analyze soil, whole rock and core samples for gold and platinum-grade metals, base metals, iron, chromite and other resource elements. Accurassay’s main lab in Thunder Bay, Ontario, processes 3000-plus samples per day using reliable and ISO/EIC17025-accredited methods including fire assay, ICP and XRF. Accurassay’s current commercial

operations cover Ontario, Quebec, Newfoundland, the Maritimes and Western Canada. The newest addition is a full prep facility in Medellin, Colombia. Features of Accurassay’s service include management of

shipping logistics, all-inclusive pricing, production of CRMs, thorough QA/QC programs, and access to online sample status information through Acculink. For fast, accredited test results at competitive pricing, look to Accurassay as your service partner.

Contact:Brad McBain VP Sales & Marketing Email: [email protected] Address: Suite 126 4026 Meadowbrook Drive London, Ontario N6L 1C7, Canada Phone: 1-519-266-4643 Fax: 1-519-652-8638 Email: [email protected] Website: www.accurassay.com

Analytical Laboratories & Supplies

laCCurassay Laboratories

Activation Laboratories Ltd. is a global contract laboratory with 29 labs in 12 countries. Most locations are full-service labs performing high-quality analysis with fast turnaround times. The labs are accredited to the ISO/IEC 17025 Quality System for specific registered tests or ISO 9001:2008 certified. Actlabs is one of the world’s best-equipped contract labs for solving any problem with its wide range of techniques and services: INAA (neutron activation), ICP/MS, High-Resolution ICP/MS, Laser Ablation HR-ICP/MS, ICP-OES, XRF, Atomic Absorption, Fire Assay, Isotopic ratios, and Age Dating. Actlabs’ Geometallurgy and

Metallurgy department, with state-of-the art FEG MLA (mineral liberation analyzer) and FEG-QEMSCAN, can help improve recovery of metals and optimize your exploration program. Actlabs uses several unique technologies to discover blind mineral deposits like SGH, Enzyme Leach, and Bioleach, while also offering many other innovative packages like hydrogeochemistry, biogeochemistry

and lithogeochemistry to aide in the discovery of new deposits. You can always count on Actlabs to provide all required analyses for high-quality environmental baseline studies.

See Country Interests Section for Worldwide.

Contact: Dr. Eric Hoffman Address: 1336 Sandhill Drive Ancaster, Ontario L9G 4V5, Canada Phone: 1-905-648-9611 Fax: 1-905-648-9613 Email: [email protected] Website: www.actlabs.com

laCtivation Laboratories Ltd. (aCtLabs)

www.camese.orgyour guide to Canadian mining technology on the internet.

Camese CompendiumofCanadianMiningSuppliers www.camese.org 19

Analytical Laboratories & Supplies

GENEQ Inc. is a Canadian supplier of laboratory equipment. GENEQ’s product line includes sample preparation products like crushers, grinders, pulverizers and mills as well as particle-size analysis tools such as sieve shakers, sieves and sample dividers. GENEQ also has a Geomatics department that sells its SXBlue GPS/GNSS high accuracy GIS receiver as well as an Environmental department that sells

water, air and soil instruments for sampling, measuring and monitoring. All products can be seen in GENEQ’s website catalog at www.geneq.com. GENEQ sells and ships worldwide!

Contact: René Parisé VP Sales and Marketing Address: 10700 rue Secant Montreal, Quebec H1J 1S5, Canada Phone: 1-514-354-2511 Toll Free: 1-800-463-4363 Fax: 1-514-354-6948 Email: [email protected] Website: www.geneq.com

lgeneq inC.

S c i e n t i f i c I n s t r u m e n t s

Laval Lab Inc. is the leading Canadian supplier of laboratory equipment. Laval Lab’s easy-to-use website displays the company’s complete line available for delivery around the world. Product lines include sample preparation (crushers, grinders, pulverizers), particle-size analysis (sieve shakers, particle-size analyzers, sieves), zeta potential, sample division, XRF-sample preparation, fluxers, platinum labware, borate fluxes and elemental analysis

(LIBS) spectrometers. Highly experienced staff takes pride in generating creative solutions to help clients increase efficiency and accuracy in laboratory analyses. For a wide range of high-quality products at a great price, visit Laval Lab online at www.lavallab.com.

Contact: Olivier Palun Address: 2567 boulevard Chomedey Laval, Québec H7T 2R2, Canada Phone: 1-450-681-3883 Fax: 1-450-681-9939 Email: [email protected]: www.lavallab.com

lLavaL Lab inC.

lsight power inC. Sight Power Inc. is a leading provider of data-modeling systems and technology solutions for the mining as well as oil and gas industries. The company specializes in the design, assembly and application of unique computer and information technology (C&I) equipment based on both static and mobile laser-scanning technology. The flagship product – Mobile Shaft Scanning System (MS3) – is designed for the automated inspection and monitoring of operational shafts. MS3 can bring immediate benefits to underground mining operations such as increased hoisting time, improved quality of shaft inspection, decreased time spent by mine personnel in

dangerous conditions, and real-time information for management decisions. Sight Power has best-in-class, data-mining technology for spatial data, which allows effective indexing and compression, spatial object recognition and spatial scene reconstruction. Other areas of expertise include the transformation of raw visual data (e.g. points clouds, video and photo images) into CAD models (vectorized 3D-objects) as well as information support for mine-shaft design, sinking and equipping.

Contact: Dr. Borys Vorobyov CEO and CTO Address: 3049 Apple Hill Drive Ottawa, Ontario K1T 3Y8, Canada Phone: 1-613-793-5010 Fax: 1-613-739-9062 Email: [email protected] Website: www.sight-power.com


Asset Liquidation Consultants

Founded in 2001, CDC Export is a company with an extensive and solid experience in purchasing, disassembling, reassembling and resale of industrial equipment of all sizes, as well as the purchase, dismantling of mining sites and reassembling of related equipment. Throughout the world, CDC meets the needs of companies from all sectors, particularly natural resources. Whether heavy equipment or entire facilities, the CDC team conducts the disassembly and reassembly in accordance with the rules of art, while undertaking a thorough mechanical inspection and, if necessary, conducting repairs or complete certified rebuilds. In addition to this unique service, CDC Export

stands by the quality of its universal network. The company has also been accredited by the Iron Ore Company of Canada (IOC). CDC Export’s clients could provide testimonials of their professionalism. Among various other projects, CDC Export has been mandated to close an important open-pit gold and copper mine in

northwestern Québec. This undertaking includes the purchasing of the necessary equipment, dismantling, container packing and finally, transporting to the buyer located in Mexico. CDC Export’s services reach far beyond its Canadian headquarters, as it offers its services around the world. You can trust CDC Export.

Contact: Melanie Trottier, PresidentAddress: 551, rue Notre-Dame Berthierville, Québec, J0K 1A0, CanadaPhone: 1-450-836-0002Cell: 1-450-944-2552Fax: 1-450-836-1146Email: [email protected] Website: www.cdcexport.com

lCdC export

CDCisregisteredCOGNIBOX

The Mackwood Group of Companies Ltd. is a world leader in equipment appraisals, surplus equipment sales, mine closure liquidations, marketing and mine equipment sales. The Mackwood Group has been contracted to market and manage numerous such projects from around the world. They have a proven track record and maintain an impressive list of client references. If you have surplus equipment you are interested to sell or are faced with a mine closure, contact The Mackwood Group and take advantage of the thousands of potential buyers and end users they communicate with on a daily basis. Also, if you are in need of equipment, The Mackwood Group

welcomes the opportunity to quote your needs and can supply almost anything you require for surface mining, mill processing, hoisting, underground track and trackless or construction related projects. Call The Mackwood Group of Companies Ltd. for all your equipment requirements or surplus equipment sales.


Contact:Michael P. Mackwood President Address: 44 Oak Road Blind River, Ontario P0R 1B0, Canada Phone: 1-705-849-3249 Fax: 1-705-356-0183 Email: [email protected]: www.themackwoodgroup.com

lthe maCkwood group of Companies Ltd.

Services at “little or no cost,

no liability with immediate results.”

Relationshipsarecriticalwhendoingbusinessoverseas.Gothereandbuildnewbridgeswith Camese’s trade show team.Seepage149.

Camese Compendium ofCanadianMiningSuppliers www.camese.org 21

Associations

Graeme Oxby Photography

These statues in Timmins, Ontario, Canada, have been erected in commemoration of prospectors Jack Wilson, Sandy McIntyre, and Benny Hollinger, whose discoveries not only launched the largest

gold rush in Canadian history, but also led to the founding of Timmins in 1912.

The Canadian Institute of Mining, Metallurgy and Petroleum (CIM) is the leading technical society of professionals in the Canadian mining, minerals, metals and energy industries. With more than 14,000 individual members, over 200 corporate members, 10 technical interest groups and over 35 branches, it serves as the foremost voice for leading industry expertise. Through its technical meetings, world-class events, award winning CIM Magazine, and quarterly peer-reviewed CIM Journal, CIM is a valuable portal for knowledge sharing and acquiring the latest information on industry developments, innovations, projects and best practices. Its technical leadership in the area of standards definitions has been highly acclaimed.

Members also gain access to an extensive and influential network through the annual CIM Convention, a growing number of specialized and

international conferences, as well as at hundreds of cross-country meetings, events and lectures. Extend your network and help shape the future of the mining industry by becoming part of this valuable community of decision-makers. Join now at www.cim.org.

Contact:Angela Hamlyln Director of Communications and Media Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Address: Suite 1250 3500 de Maisonneuve Blvd. West Montreal, Québec, H3Z 3C1, Canada Phone: 1-514-939-2710, ext. 1303 Fax: 1-514-939-2714 Email: [email protected] Website: www.cim.org

lCanadian institute of mining, metaLLurgy and petroLeum (Cim)


Associations

lgreater sudbury deveLopment Corporation

Over 300 mining products and services companies

are located within the City of Greater Sudbury.

Greater Sudbury Development Corporation: The City of Greater Sudbury is home to North America’s highest concentration of mining expertise. From capital equipment to consumables, engineering to mine construction and contracting, from mapping to automation and communications – its companies are innovators. More than 300 mining products and services companies are located within the City of Greater Sudbury. At the Greater Sudbury Development Corporation, it’s their job to make the connections that

count – whether it’s making introductions to local companies, providing market intelligence or providing investment and exporting

information. So, if you’re looking for the latest in mining technology – or thinking of establishing a presence in the industry – you should be looking to the City of Greater Sudbury.

Contact: Paul Reid Address: Tom Davies Square 200 Brady Street Sudbury, Ontario, P3E 5K3, CanadaPhone: 1-705-674-4455, ext. 4608Fax: 1-705-671-6767Email: [email protected] Website: www.sudbury.ca

lmining assoCiation of Canada (maC)

The Mining Association of Canada (MAC), located in Ottawa, is the national association of the Canadian mining industry. It comprises companies engaged in mineral exploration, mining, smelting, and refining. Member companies account for the majority of Canada’s output of metals and major industrial materials. The association’s mission is to promote, through the collective action of members, the growth and development of Canada’s mining and mineral processing industry for the benefit of all Canadians. An important function is to work closely with the federal government to improve the business

climate in Canada. The government, public and the association’s diverse group of stakeholders recognize MAC as a source of reliable information and valuable consultation on matters concerning the industry and its place in Canadian society. In 2004, MAC launched Towards Sustainable Mining, a stewardship initiative focused on improving the mining industry’s social, environmental and economic

performance. The Globe Foundation honoured MAC as its 2005 recipient of the Globe Industry Association Award for Environmental Performance.

Contact:Pierre Gratton Address: Suite 1105 350 Sparks Street Ottawa, Ontario K1R 7S8 Canada Phone: 1- 613-233-9391 Fax: 1-613-233-8897 Email: [email protected] Website: www.mining.ca

why join Camese?LocatedinMarkham,Ontario,CAMESEisatradeassociationexistingtosupportCanadianfirmsinexportingtotheworldwideminingindustryandtoassistforeignbuyerswantingtofindsourcesforminingsuppliersinCanada.

www.camese.org


Associations

lmining suppLiers assoCiation of b.C. (msabC)

The Mining Suppliers Association of B.C. (MSABC) was formed in 1986 and comprises suppliers, contractors and consultants to the B.C. mining industry. MSABC advocates the importance of mining to the economic well-being of the province and is committed to promoting the development of a sustainable mining industry in B.C. It is an effective lobbying force on behalf of the mining industry. In addition to advocacy, benefits include networking (several major events with the MABC and Western Mine Maintenance

Association); weekly activity reports of B.C.-registered mining companies (local and offshore); a personnel list (senior staff at operating mines and head offices); and regular email updates on “Projects under Study” for B.C. and the Yukon. MSABC is affiliated with the Mining Association of British Columbia (MABC); its Chairperson is a full voting member of the MABC Board and the Director of MSABC Relations enhances cooperation between mining companies and MSABC member companies.

Contact: Terry Mulligan, President & CEOAddress: Suite 900, 808 West Hastings Street Vancouver, British ColumbiaV6C 2X4, CanadaPhone: 1-604-681-4321, ext. 111Fax: 1-604-681-5305Email: [email protected] Website 1: www.miningsuppliersbc.ca Website 2: twitter.com/#!/minesuppliersbc

lpdaC – prospeCtors & deveLopers assoCiation of Canada

The Prospectors & Developers Association of Canada (PDAC) is a national association representing the mineral exploration and development industry. The PDAC has more than 10,000 individual and corporate members and encourages the highest standards of technical, environmental, safety and social practices in Canada and around the world. Areas covered by the association’s wide range of advocacy work include Aboriginal affairs, corporate social responsibility (CSR), finance and taxation, geosciences, human resources, education, business

insurance, land access, and securities regulations. The PDAC also hosts the mineral industry’s largest annual convention in downtown Toronto. The 2013 convention attracted more than 30,000 attendees, including 7,500 international delegates from 126 countries. The 2014 convention will take place March 2-5 at the Metro Toronto Convention Centre.

Contact:Prospectors and Developers Association of Canada Address: 135 King Street East Toronto, Ontario M5C 1G6, Canada Phone: 1-416-362-1969 Fax: 1-416-362-0101 Email: [email protected] Website: www.pdac.caTwitter @the_PDAC

Canadian Mining Facts

did you know Canada’s mining industry…

•Employs320,000Canadiansandcontributes$35.6billiontotheGDP?

•Pays$9billiontogovernmentsintaxesandroyalties?

•Providesamarketto3,200suppliersofmininggoodsandservices?

•IsthelargestprivateemployerofAboriginalCanadians?Source: FACTS & FIGURES 2012, The Mining Association of Canada



The mill control room at Detour Gold’s Detour Lake Gold Project, north of Cochrane, Ontario, Canada.

Automation & Communications

Hepburn Engineering Inc. (HEI) designs and supplies complete mine hoisting systems with fully integrated electrical controls, digital drives, digital safety monitors, PLC-based operating systems and hoist management software for automated hoisting. The Hepburn Hoist Manager is the most advanced, comprehensive and user-friendly hoist-operating and management system available today. It incorporates advanced fault logging and diagnostics and can be configured to control hoists from a remote location. The new Hepburn Hoist Reporter software provides mine management with detailed, real-time production reporting, hoist status and searchable fault history using standard web browsers. Through Hepburn Hoist Care, Hepburn engineers can remotely access the hoist controllers and perform remote diagnostics to solve problems quickly. Hepburn electrical controls and Hoist Manager can be retrofitted to existing hoisting plants,

lhepburn engineering inC.

HEPBuRNHoistManagerDisplay

ControlRoomforHEPBuRNShaftSinkingHoistsandWinches

as well as incorporated in new hoists, to improve automation, performance, productivity, safety and maintenance. See the Hepburn company profile under Hoisting Equipment.

See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, North America and Worldwide.

Contact: John Hepburn, President Address: 73 Six Point Road Toronto, OntarioM8Z 2X3, CanadaPhone: 1-416-638-4425Fax: 1-416-638-2070Email: [email protected] Website: www.hepeng.com



Hard-Line is a leading supplier and manufacturer of radio remote and tele-operated control systems to the mining industry. From LHD’s to Rockbreakers to excavators, Hard-Line can remote control essentially

any piece of industrial machinery. Hard-Line develops new and innovative products that save lives while increasing production in the global mining market. Its products are developed and manufactured by the company including electronics, electrical design, and mechanical design. Based in Northern Ontario, Hard-Line has offices in Chile and Peru as well as distribution around the globe. With ground-breaking products constantly being designed and perfected, research and development is crucial to the company’s growth. Hard-Line is also

a provider of shaft guides and has developed two specialty vehicles – the LP401 (low profile loader) and the CX4800 (compact exploratory vehicle). This creative innovation allows Hard-Line to raise the efficiency of mines all over the world. When the mining industry has a problem, Hard-Line solves it.

Contact: Ryan Siggelkow Vice President Email: rsiggelkow@hard-line comAddress: 53 Main Street P.O. Box 908 Dowling, Ontario P0M 1R0, Canada Phone: 1-705-855-1310 Fax: 1-705-855-9463 Email: [email protected] Website: www.hard-line.com

lhard-Line

Laird Technologies is dedicated to improving safety, efficiency and productivity for its customers worldwide. Laird Technologies’ Wireless Automation and Control Solutions (WACS), formerly Cattron, is an industry leader in the design, manufacturing, installation and service of mining industry solutions, delivering a full line of cost-effective, reliable and rugged communication and remote control products. The CattonControl™ family of remote controls offers flexibility, safety and streamlined workflows while CattronConnect™ software increases productivity and profit through custom reports and monitoring. In addition to the Cattron brand products, Laird Technologies offers SIAMnet Communications, which provides a safe and more efficient mining environment by combining

conventional two-way radio technology with high-speed data transmission. Laird Technologies is also an industry leader in the design and manufacturing of electromagnetic interference (EMI) shielding, telematics, thermal management and antenna solutions with 46 locations across 16 countries, including the U.S., Canada, U.K. Germany, Africa, Brazil and Asia.

Contact: Eric Brouillette VP Sales & Marketing – Mining Email: [email protected]: 3850 Griffith Saint-Laurent, Québec H4T 1A7, Canada Phone: 1-514-908-1659 Fax: 1-514-908-1674 Email: [email protected] Website: www.lairdtech.com

lLaird teChnoLogies



Festo is a global player and an independent, family-run business based in Esslingen, Germany, that supplies pneumatic and electric automation technology to 300,000 factory and process automation customers in over 200 sectors. Festo applies more than 50 years of experience in automation technology to process automation within the field of metal and mineral processing. Festo

offers complete automation solutions that are individually tailored to the requirements of plant operators. To learn more, visit www.festo.ca/mining.

Contact: John Lamb Industry Segment Manager Natural Resources Address: 5300 Explorer Drive Mississauga, Ontario L4W 5G4, Canada Phone: 1-877-GO-FESTO Fax: 1-877-FX-FESTO Email: [email protected] Website: www.festo.ca

lfesto inC.

Penguin Automated Systems Inc. (ASI) is a leading research, development and prototyping company providing professional and comprehensive robotic and automation solutions for underground, underwater, in-space and on-surface applications. Daily operations focus on expanding and inventing new technologies in order to provide its clients with the most advanced and impressive products

on the market. The combination of Penguin ASI’s expert knowledge and skilled resources maximizes efficiencies and provides cost-effective solutions. With a suite of products that include underwater and free-space optical networking, underground positioning systems and inertial navigation and positioning, Penguin ASI is fast-developing as a leading innovator in the field of robotics and automation;

providing solutions from concept and design to finished commercial products by applying specialty communications. The software and intelligent systems, unique electronics, tele-autonomy and mobile mechatronics that Penguin ASI produces enable its specialists to provide complete services to meet the mining industry’s expanding range of needs.

Contact: Mykel Rocca Communications ManagerEmail: [email protected]: 1755 Regional Road 55 Naughton, Ontario, P0M 2M0, CanadaPhone: 1-705-692-8748 ext. 201Fax: 1-705-692-8799Email: [email protected] Website: www.penguinasi.com

robomap: robotic mapping & surveying systemAtTelecommand Central,therobotaccuratelymapstunnels,terrainsandother

complexspaces,transferringthedatacollectedintopopularengineeringCADsystems.

lpenguin automated systems inC.


lnorthern Light teChnoLogies inC. (nLt)

Northern Light Technologies Inc. (NLT), founded in 1994, designs and manufactures underground lighting and communications solutions for the mining and tunneling industries. NLT Mining Networks™ offer a holistic approach to underground communications. Based on open standards, NLT uses Wi-Fi protocol and wireless communication technologies to enable a fully connected mine that is safer and more efficient. With manufacturing/assembly locations in Canada, Australia and Chile, the NLT network offers a rich suite of applications including personnel and equipment tracking, two-way voice and text communication, traffic management, atmospheric monitoring, real-time data acquisition and controls for

pumps, fans and other devices. NLT’s offering also includes a Wi-Fi VolP enabled telestrating video camera. Northern Light® cap lamp systems are designed for maximum durability and comfort while offering power take-off, RFID and Wi-Fi tracking options. Included in their lineup are the award-winning Polaris (Mining Magazine “Underground Mining Soft Rock” winner), the lightweight corded Eclipse, and now the new cordless and

tag-enabled Genesis. Specialties: Mining cap lamps, mining networks, voice-over Wi-Fi handset with PTT, Wireless Input Output Device (WIOD), RFID and Wi-Fi tracking, traffic management, environmental monitoring, two-way text messaging in cap lamps, telestrating video with VoIP, and custom software.

Contact: Nataly Carbone Marketing Specialist Email: [email protected]: 33 Laird Drive Toronto, Ontario, M4G 3S8, Canada Phone: 1-905-287-3552 Fax: 1-416-425-5960 Fax: 1-905-829-2919 Email: [email protected] Website: www.nltinc.com

Established in 1971, the mission of the PBE Group has always been to design and build reliable technology solutions for mines, tunnels and quarries to improve safety and productivity. PBE’s philosophy of quality, research and practical industry knowledge remain the key ingredients to the continued success of the company. The PBE MineBoss™ centralized monitoring system is currently operating at more than 300 sites. In addition, products from PBE’s conveyor monitoring and controls, underground-communication infrastructure, surface-communication solutions, fixed-gas monitoring, atmospheric monitoring, fire deluge, dust suppression and paging telephone lines are also installed in over 1000 operations worldwide. In

lpbe (pyott boone eLeCtroniCs Canada Ltd.)

Formerly Mine Radio Systems (MRS)

April 2012, PBE acquired Minecom, an Australian manufacturer of underground communications equipment, followed by the acquisition of Mine Radio Systems (MRS) in January 2013. This provides PBE with the most extensive product portfolio in communications and safety systems globally.

See Country Interests Section for Asia-Pacific, Europe, Latin America and the Caribbean, Middle East and North Africa, North America, Sub-Saharan Africa and Worldwide.

Contact: Cindy Chesney General Manager, Latin AmericaEmail: [email protected] Mirza Kozarcanin, Vice President SalesEmail: [email protected] Mary Whitt, Marketing Coordinator Email: [email protected] Address: 394 Highway 47 Goodwood, Ontario, L0C 1A0, Canada Phone: 1-905-640-1839 Fax: 1-905-640-1649 Email: [email protected] Website: www.pbegrp.com



Automation &Communications

Rockwell Automation helps manufacturers grow and succeed with industrial automation control and information solutions designed to offer a competitive advantage. From standalone, industrial components to enterprise-wide integrated systems, solutions from Rockwell Automation have proven themselves across a wide range of industries and in some of the most demanding manufacturing environments. Rockwell Automation offers open-pit and underground mining operations a complete process automation solution plus plant-wide control featuring advanced process

control, process safety systems and power and energy management solutions – all designed to maximize your operations and minimize downtime.

Contact: Andrew BagleyIndustry Marketing Lead Mining, Minerals, Cement Address: 360 Holiday Inn Drive Cambridge, Ontario, N3C 3Z9, Canada Phone: 1-519-244-5321 Fax: 1-519-244-3629 Email: [email protected] Website: www.rockwellautomation.com

lroCkweLL automation

SNL Metals Economics Group (SNL MEG) provides the highest quality comprehensive mining industry information and analysis. Clients including mining companies, financial institutions, service and equipment providers, government organizations and consulting firms are able to make smarter decisions more quickly with SNL MEG’s in-depth data and expert research, available in a single online platform. Three decades of experience in the industry, 24/7 support and point-and-click tools to manipulate data are just a few of the

advantages. SNL MEG’s integrated database and Excel add-in tool allow clients to quickly populate spreadsheets with continuously updating project data for custom reporting. New features include interactive project mapping, daily news, M&A analysis and more. SNL has offices around the world including London, Hong Kong, New York and Halifax, Canada.

Contact: Bakes Mitchell Senior Sales ExecutiveAddress: Suite 3001718 Argyle StreetHalifax, Nova ScotiaB3J 3N6, Canada Phone: 1-902-442-7915Email: [email protected] Website: www.SNLMetalsEconomics.com

lsnL metaLs eConomiCs group

SolidCAD Solutions utilizes technology to optimize the project workflow across every department in your organization: exploration, site work, development, operation, closure/environmental, milling, processing, smelting, waste water management and plant design. This results in increased project productivity and efficiency, reduced

costs, improved collaboration and accessible data from a variety of locations. If you want to improve your workflow, call Syed Rizvi at 1-887-438-2231, ext. 242.

Contact: Linda HainesMarketing Manager Address: Suite 240 2300 Steeles Ave. West Vaughan, Ontario L4K 5X6, Canada Phone: 1-905-474-1499, ext. 240 Email: [email protected] Website: www.solidcad.ca

lsoLidCad soLutions



Wainbee Limited was established in 1957 as a manufacturer’s agent and industrial distributor. The company has since grown to become one of Canada’s leading providers of technical and supply-chain solutions for automation and control. Wainbee’s ability to integrate hydraulic, pneumatic, electromechanical, control and filtration technologies has allowed it to offer smart systems for many mining and geological applications across Canada. As an incorporated company with more

than 220 employees in 15 Canadian locations, Wainbee has distinguished itself as employee-owned and is controlled by principal employee-shareholders who are active in the daily operations as the company’s management team. The company is also ISO 9001:2008 registered. Since Wainbee is not limited to one or two technologies, you can be assured that its innovative design solutions have high-performance parameters, are cost-effective and will meet your production challenges.

Contact: Sorina Casolteanu, P.Eng., PMP Marketing Specialist Address: 5789 Coopers Avenue Mississauga, Ontario L4Z 3S6, Canada Toll Free: 1-888-924-6233 Fax: 1-905-568-0083 Email: [email protected] Website: www.wainbee.com

lwainbee Limited

lbritespan buiLding systems inC.

BRITESPAN Building Systems Inc. is a leading provider of Hot Dip galvanized steel-framed, fabric-covered buildings for the mining industry. With more than 17 years’ experience in the industry, BRITESPAN Building Systems engineer its structures to each site’s load conditions. All trusses are fully fabricated, and then sent to the galvanizing tanks to get coated “inside

and out” after fabrication. No welding on the trusses after galvanizing – this is what separates BRITESPAN buildings from its competitors. Most other manufacturers use pre-galvanized steel, weld the trusses together, and then coat only the outside visual part with re-galvanizing spay. This leaves the inside of the truss with its protection burnt off without protection against rusting.

BRITESPAN Building Systems provides pre-engineered buildings from 19-ft. to 160-ft. wide in approximately 10-ft. wide increments. Call BRITESPAN Building Systems for your next building requirement and let its team build to your requirements.

Contact: Ben Hogervorst Kelly Thomson, Marketing ManagerAddress: 37651 Amberley Road Lucknow, OntarioN0G 2H0, CanadaPhone: 1-519-528-2922Toll Free Phone: 1-800-407-5846Fax: 1-519-528-2890Email: [email protected] Website: www.britespanbuildings.com

Buildings, Portable


Buildings, Portable

lnorseman struCtures

Norseman Structures provides a strong alternative building solution for mining engineers, project developers and site and process

managers. The clear-span interior of Norseman’s buildings provides flexibility to design maximum storage space and easily maneuver large equipment. The unique building design can serve many functions on-site including exploration, staging and warehousing, bulk storage, workshops and garages, and process and packaging operations. The buildings can be built in a fraction of the time needed for traditional structures, are supported by a 10- or 15-year pro rata warranty and can be relocated or extended to meet changing needs. Norseman Structures has a full line of standard products designed to meet or exceed

building codes and the ability to design and manufacture a custom structure to meet unique site and logistic needs. All building designs are reviewed by third-party engineers and rigorously tested to ensure the quality and structural integrity of every building.

Contact: Gerri Masciangelo Address: 3815 Wanuskewin Road Saskatoon, Saskatchewan S7P 1A4, Canada Phone: 1-306-385-2888Toll Free: 1-855-385-2782 Fax: 1-306-249-1889 Email: [email protected] Website: www.norsemanstructures.com

Sprung structures are the ideal solution for mining companies who require immediate infrastructure in any number of challenging conditions. Sprung structures can be erected under rigid construction timelines with flexible cost-saving and foundation-requirement options. An optional fiberglass insulation package provides an energy-efficient building solution that can be utilized for a wide range of personnel applications. Sprung structures are designed to shed snow and engineered to withstand extreme wind loads. Applications include: on-site warehousing and equipment storage, vehicle maintenance facilities, safety meeting rooms, training facilities, on-site dining, dormitory housing, recreational facilities, aircraft hangars, bulk storage, milling operations, remote ore-processing facilities, winter hoarding, winch and hoist housing, environmental remediation, pond enclosures and core-sampling facilities.

Contact: Jim Avery, Vice President Address: P.O. Box 62 Aldersyde, Alberta T0L 0A0, Canada Phone: 1-403-601-2292 Fax: 1-403-601-4833 Email: [email protected] Website: www.sprung.com

lsprung instant struCtures Ltd.

www.camese.orgfeaturing information about more than 300 Canadian mining suppliers.

Instantel, a division of Xmark Corporation and a member of Stanley Black & Decker, Inc., was established in 1982. Instantel’s vibration and overpressure monitors have earned their position as the world’s most trusted monitors for regulated vibration control. Instantel offers the industry’s largest global independent dealer

network, providing equipment sales and rentals, as well as professional consulting and monitoring services for any project. In addition, Instantel offers an international network of factory-authorized calibration and service sites strategically located. To learn more about Instantel, visit www.instantel.com.

Contact: SALES Address: 309 Legget Drive Ottawa, Ontario, K2K 3A3, CanadaPhone: 1-613-592-4642Toll Free: 1-800-267-9111Fax: 1-613-592-4296Email: [email protected] Website: www.instantel.com

linstanteL


Buildings, Portable

Future Buildings has more than 30 years of experience in manufacturing prefabricated steel buildings of every size and complexity. The company has grown to include the foremost engineering, production and customer-service professionals in the industry. It has assisted hundreds of consumers in expanding and improving their businesses by being able to work quickly and efficiently to deliver custom steel-building projects on time and on budget. Future Buildings stands up to the tests of time, wear and

weather in the face of fierce winds, heavy snow loads and extreme storm conditions including hurricanes. When you choose a steel building made by Future Buildings, it is backed with a 30-year rust-perforation warranty. Call Future Buildings for your next steel building project. Please visit www.BuildingsForMining.com, a unique division of Future Buildings developed to provide the mining and exploration industry with both arch-and straight-wall steel building solutions.

Contact: Candice Sheldon, Marketing ManagerAddress: 1405 Denison Street Markham, Ontario, L3R 5V2, CanadaPhone: 1-905-477-1894Fax: 1-905-477-3661Email: [email protected] Website: www.futurebuildings.com Pricing: http://futuresteel.com/future-steel-products/commercial-steel-buildings.html

lfuture buiLdings

Weatherhaven of Burnaby, B.C., is a world leader in the design, manufacturing, transport and installation of rugged, portable, fabric covered structures. These shelters can include sleeping quarters, offices, recreation facilities, wash houses, kitchen/dining facilities, warehouses and shops. Weatherhaven’s design commitment to low shipping weight and volume achieves unparalleled portability while maintaining a high performance product for even the most inclement conditions. The shelters can be packaged, transported and relocated with minimal effort, maximum efficiency and reduced

costs. Weatherhaven also offers full turnkey camp accommodation solutions, which may include electrical, mechanical, water and waste systems. With manufacturing and project management facilities in Peru, Brazil and South Africa, plus sales offices in the United Kingdom and Australia, Weatherhaven accommodates your camp needs no matter where on earth they may be. From one structure to a full turnkey camp, Weatherhaven can deliver a safe and comfortable shelter system.

Contact:Mike Ball Email: [email protected] Address: 8355 Riverbend Court Burnaby, British Columbia V3N 5E7, Canada Phone: 1-604-451-8900, ext. 311 Fax: 1-604-451-8999 Email: [email protected] Website: www.weatherhaven.com

lweatherhaven

Blasting Equipment & Services


Bulk Material Handling Equipment, Systems & Engineering Services


Shown here is the underground conveyor at Agnico Eagle’s flagship mine, LaRonde Mine, Abitibi Region, Québec, Canada.

B.I.D. Bulk Material Handling Systems has designed and manufactured custom bulk material – handling equipment for more than 30 years. B.I.D. supplies belt, tripper, shuttle, chain and screw conveyors, hoppers, chutes and associated galleries, trusses and bents. B.I.D. can supply a single conveyor or complete material-handling system for customer needs in mining, cement,

lb.i.d. buLk materiaL handLing systemssteel, ports, power, biomass, as well as the pulp and paper industries. Its pre-assembled modules permit efficient installation resulting in lower total – installed – cost for the project. B.I.D. combines experience with in – house engineering and manufacturing abilities to get the job done on schedule, on budget and to the customer’s complete satisfaction. Located in Woodstock, New Brunswick, Canada. B.I.D. is positioned close to several major Atlantic seaports that provide efficient access to customers in North America as well as around the world. Look to B.I.D. for top notch conveying quality.

Contact:Derek Lawrence Sales and Estimating Manager Address: 171 Hemlock Street, TCH Exit 191 P.O. Box 9054 Woodstock, New BrunswickE7M 6B5, CanadaPhone: 1-506-328-4381, ext. 510Fax: 1-506-328-3430Email: [email protected] Website: www.bidcanadaltd.com


Bulk Material Handling Equipment, Systems & Engineering ServicesBulk Material Handling Equipment, Systems & Engineering Services

Aran International has garnered a position as a developer of highly mobile and versatile construction equipment. Servicing the mining industry is a core focus of Aran’s activities. Involved with mining operations in Australia, Africa, North and South America, Aran’s experience is broad and varied. Whether it be the supply of a specialized mixer, a processing plant or a complete service solution including specialized equipment and operators, Aran’s

machines are designed to embrace and respect the environment to ensure they leave a small footprint after the

job is complete. Aran makes certain your mining operations are more efficient, safe and environmentally responsible.

Contact: Shane Dunstan, President Address: 55 York Street, Suite 201 Toronto, OntarioM5J 1R7, CanadaPhone: 647-284-3866Email: [email protected] Website: www.aran.com.au

laran internationaL Ltd.

R

Canadian Wear Technologies – “Your chrome white iron specialists” provide wear solutions for oil sands and hard-rock mining. Serving the mining industry since 1985, Canadian Wear Technologies offers a range of products covering basic to advanced wear protection. The Abreco Wear System™ has proven to increase production uptime significantly in primary crushing circuits in hard-rock mining. Products include AbrecoPlate®, AbrecoPipe®, Ultra Wear® Chromium-Carbide Overlay Plate & Pipe, AR Plate, UHMW, ceramic liners and castings in a variety of alloys. Services include custom and co-design, complete fabrication, CAD service and inventory replenishment programs.

The company’s goal is to continue its steady growth by helping its customers reduce operating costs related to wear and by making it easy for them to source replacement materials. AbrecoPlate® is a premium wear material that simply outlasts other materials on the market today; it’s a composite of extremely wear-resistant, high-alloy, high-carbide cast white iron 700+ BHN (64 Rc) that is metallurgically bonded to a mild steel backer plate. The backer plate provides

weld ability and impact resistance. AbrecoPipe® is the world’s first and only centrifugally cast, bimetallic, seamless piping for severe abrasion and erosion that can be formed into long radius elbows, consisting of a chrome white iron inner wear layer metallurgically bonded to a ductile steel outer layer (4-in. to 34-in. OD). Both AbrecoPlate® and AbrecoPipe® outperform chrome carbide overlays by a factor of five.

See Country Interests Section for Europe, Latin America and the Caribbean, and North America.

Contact:Keith HolbrookPresident Email: [email protected]: 1-905-373-9327, ext. 308Bill LeeDirector Sales & MarketingEmail: [email protected]: 1-905-373-9327, ext. 305Nathaniel ElderProduct Engineer Email: [email protected]: 1-905-373-9327, ext. 319Address: 675 Brook Road North Cobourg, Ontario, K9A 4J8, CanadaFax: 1-905-373-4172Email: [email protected] Website: www.canadianweartech.com

lCanadian wear teChnoLogies



BTI (Breaker Technology Ltd.) has been innovating custom-engineered rock-breaking solutions since 1958. Whether it’s for construction, aggregate or mining applications, BTI has developed a system to surpass your needs. BTI is Taking Reach to the eXtreme with its new TRX Series Rockbreaker System, representing its 2,000th Boom System produced – a clear milestone in BTI’s commitment to providing the best in rockbreaking boom system technology. BTI also produces a full line of rugged, low-profile, underground utility vehicles including mobile scalers, scissors lifts, crane trucks, lube trucks, anfo loaders, shotcrete mixers and placers, cassette systems, APV – all purpose vehicles and personnel vehicles. Well recognized as a leader in global mining and quarry markets, BTI offers unparalleled experience and product support through its network of strategically located international distributors. When your jobs become bigger and results become tougher to achieve, rely on BTI to continue to exceed your needs.

Contact:Terry McKague Canadian Director of Sales Phone: 1-519-599-2015 Fax: 1-519-599-6803 Email: [email protected] Website: www.RockBreaker.com

Contact: Jim Brown Vice President of SalesInternational & U.S. Phone: 1- 519-599-2015 Fax: 1-519-599-6803 Email: [email protected] Website: www.RockBreaker.com

Contact: Michael McFarthing Marketing Manager Address: 35 Elgin Street North P.O. Box 130 Thornbury, OntarioN0H 2P0, CanadaPhone: 1-519-599-2015Fax: 1-519-599-6803Email: [email protected]: www.RockBreaker.com

lbti (breaker teChnoLogy Ltd.)

trx – taking reach to the extreme

Industrial Equipment Manufacturing Ltd.( IEM) has engineered and manufactured bulk materials handling equipment for the mining and other heavy-duty industry segments for more than 55 years. At its plant in Surrey, BC, on-site design and manufacturing allows for strict quality and production control through the production process, guaranteeing the highest standard of product quality and reliability. The close proximity of the plant to Pacific seaports allows IEM to readily ship to all parts of the world. IEM equipment and systems convey bulk materials

used in mining, port transfer and loading facilities, pulp and paper mills, sawmills, cement and aggregate plants, grain elevators and similar industries. IEM’s range of products include apron feeders, belt feeders, belt conveyors, ball feeders with distribution conveyors, high-lift conveyors, bucket elevators and specialty pulley and belt cleaners. While standardized product designs allow for fast track availability

and modifications to meet client needs, custom engineering, design and manufacturing are available for your special needs projects.

Contact:Victor SantistebanProject Coordinator/SalesmanAddress: Unit 109 19433 96th Avenue Surrey, British Columbia V4N 4C4, Canada Phone: 1-604-513-5216 Fax: 1-604-513-9905 Email: [email protected]: www.iem.ca

lindustriaL equipment manufaCturing Ltd.

Falco Technologies Inc. is one of the operating divisions for Groupe Berlie-Falco, a Canadian company that offers 360° turnkey solutions to optimize production processes and systems. Falco Technologies specializes in the manufacturing of process equipment made of stainless steel and superior alloys. Its service offering includes customized manufacturing, worksite operations such as sanitary piping installation and erecting, as well as repairing and upgrading industrial equipment on-site. Falco Technologies

Research and Development team collaborate closely with clients and engineering firms in the development, manufacturing and implementation of specialized process equipment. Falco Technologies prides itself on its approach to health and safety issues throughout the design, installation and training in projects. Its emphasis on prevention has resulted in the standard

use of safe-work procedures and the utilization of sensors and self-check systems throughout the production process.

Contact:Stephane Audy Vice-President Sales & Marketing Address: 1245 Industrielle LaPrairie, Québec J5R 2E4, Canada Phone: 1-450-444-0566 Email: [email protected] Website: www.berliefalco.com



Conveyors Plus, located in Timmins Ontario, specializes in the fabrication, assembly and installation of the patented Sure Align Tracker belt conveyor alignment system for the mining, oil and gas, and material handling sectors. Conveyors Plus’ Sure Align Tracker is an affordable and proven system that immediately increases safety, productivity and cost savings. Since its inception in 2004, the company has experienced significant growth by introducing this innovative and highly successful alignment system

in major mines around the world. The company currently has systems installed with Newmont, FMI, Xstrata, BHP, Lafarge, Barrick, Rio Tinto, Vale,

Goldcorp, Detour, Codelco, IOC, Brigus Gold, DeBeers Diamond Mines, Coal mines, CNRL Oil Sands and Potash Corporation.

Contact: Dave Sharp President Address: 1497 Goldmine Road Timmins, Ontario, P4N 7C2, Canada Phone: 1-705-363-6201 Fax: 1-705-268-4498 Email: [email protected] Website: www.conveyorsplus.ca

lConveyors pLus

lfaLCo teChnoLogies inC.

The StonCor Group combines the resources of four leading corrosion control companies – Stonhard, Carboline, Fibergrate and StonCor Construction Products Group. StonCor Group provides a single source for all of your flooring, coating, lining, fireproofing, waterproofing, concrete repair and restoration, and FRP (Fiberglass Reinforced Plastic) grating and structural system requirements. StonCor provides corrosion engineering solutions for metal, concrete and infrastructure. StonCor’s corrosion mapping and audit approach to detecting, monitoring and preventing

corrosion includes professional service with expert consultants and customer-sponsored performance testing programs to investigate specific corrosion issues as well as a full-service corrosion-prevention laboratory. StonCor’s expert staff of materials engineers and corrosion specialists has many years of experience in the fields of corrosion, materials selection, mechanical behaviour and failure analysis. StonCor understands the

challenges and opportunities facing corrosion protection and their single-source service gives you cutting-edge quality in their long-term, cost-effective corrosion-resistant solutions.

Contact: Kathryn Winkelhorst Project Development ManagerAddress: 95 Sunray Street Whitby, OntarioL1N 9C9, CanadaPhone: 1-905-430-3333Fax: 1-905-430-3056Email: [email protected] Website: www.stoncor.ca

lstonCor group



Luff Industries Ltd. manufactures quality conveyor components, including idlers with patented polymer end caps and pulleys with an industry-leading rim thickness, to an international market. Using Luff components, companies have been increasing the performance of their conveyor systems for more than 30 years. Recognized for innovative products, quick turnaround times and industry-leading warranty, Luff conveyor components can be found in a variety of heavy industrial material-handling applications. These industries include aggregate, mining, forestry, OEM (original equipment manufacturers), construction and recycling. Due to these different application requirements, Luff manufactures one of the most complete product lines available. Contact Luff Industries today and increase your “Conveying Performance.”

Contact: Steve Cook, Sales ManagerEmail: [email protected] Address: 235010 Wrangler Road Rocky View (Calgary), Alberta T1X 0K3, Canada Phone: 1-403-279-3555 Toll Free: 1-888-349-LUFF (5833) Fax: 1-403-279-5709 Email: [email protected] Website: www.luffindustries.com

lLuff industries Ltd.

lhazeLand manufaCturing inC.

provide multiple use as well as individual requirements. These units are used in hydro-excavation, visible-locating, spill-cleanup, water-blasting, pressure-washing, debris-vacuuming and sewage-disposal services. With access to a wide range of vacuum blowers and water-pressure pumps along with related components from around the world, Hazeland provides parts and service support as well as refurbishing/rebuild and fabricating services to keep your operations on track. If it can be done, Hazeland will do it.

Contact: Ben BouwmanPresidentAddress: 10 Highlander St. P.O. Box 722 St. George/Brant, OntarioN0E 1N0, CanadaPhone: 1-519-448-1190Fax: 1-519-448-1199Email: [email protected] Website: www.hazeland.com

Hazeland Manufacturing Inc. is a leading Canadian manufacturer of hydro-excavation, pressure-cleaning and vacuum equipment for mining support services. Hazeland takes pride in manufacturing quality, cost-effective equipment solutions. The HYDROSPADE product line ranges from small, compact trailers to large trucks. Hazeland provides standard and custom-tailored units to



Multicrete Systems Inc. offers leading-edge project solutions for the mining industry wherever shotcrete, grouting and concrete programs are required worldwide. Its multi-disciplinary team of more than 100 employees includes engineers, mining professionals and construction specialists who supply you with the technical assistance you need. With its head office located in Winnipeg, MB, Canada, and six other operational branches spanning western Canada, Multicrete has proudly provided solutions for both specialized shotcrete programs and complex projects in logistically difficult terrains

for mining companies such as Goldcorp, VALE, Hudbay Minerals, Rio Tinto, BHP Billiton, CAMECO, Diavik Diamond Mines and De Beers Canada. Multicrete is proud that its high-quality equipment has repeatedly provided cost-effective solutions to meet customer’s needs. This includes

designing and building fully automated batching facilities as well as storage and state-of-the-art bulk transport systems to accommodate Multicrete’s unique packaging system for custom orders of shotcrete, grout and concrete.

Contact: Georg Nickel, President & CEO Address: Unit 360-555 Hervo Street Winnipeg, Manitoba R3T 3L6, Canada Phone: 1-204-262-5900 Fax: 1-204-262-5909 Email: [email protected] Website: www.multicretesystems.com

lmuLtiCrete systems inC.

Mecanicad manufactures ventilation ducts, hoppers, chutes, fences and liners out of plastic plates and pipes. Various sizes and types are used depending on their final use. Mecanicad’s development team has leveraged its experience in mine and smelter sites to offer solutions that improve your operation’s efficiency. As a result, Mecanicad has developed a unique way of installing slick plastic linings in hoppers and silos to reduce production downtime with a new type of underground rigid plastic duct system called Mecanivent®. Mecanivent®

reduces transport, handling and repair costs as well as saves thousands of dollars in energy requirements for all installations. Currently, Mecanicad is working on new products to reduce mining-operation costs, which in turn improve your return on investment. Call Mecanicad for more information or visit its website listed at right.

Contact: André Paquet President Email: [email protected] Cristian Paquet Production manager Email: [email protected] Address: 115 rue Jacques-Bibeau Rouyn-Noranda, Québec J9Y 0A3, Canada Phone: 1-819-797-2009 Toll Free: 1-888-797-2009 Fax: 1-819-797-4441 Website: www.mecanicad.ca

lmeCaniCad inC.

lveyanCe teChnoLogies Canada, inC.

Veyance Technologies Canada, Inc. is the exclusive manufacturer of Goodyear Engineered Products. Three of the ways Veyance Technologies can accelerate your business is through good people, innovative technologies, and smart solutions. Together, these strengths drive the development of Goodyear Engineered Products’ complete family of products: industrial and hydraulic hose and fittings,

automotive and commercial truck, conveyor belt, power transmission, home and garden, rubber track and original equipment parts. Backed by Veyance Technologies’ best-in-class distributor network, you benefit from innovative market-driven products that boost efficiency, but also from generations of industry experience that combine to keep your profit potential high and your operating costs low.

Contact: Brad BaberAddress: 237 Brunel Road Mississauga, OntarioL4Z 1X3, CanadaPhone: 1-905-366-2010Email: [email protected] Website: www.goodyearep.com



lstandard maChine

Standard Machine is one of North America’s only complete gear/machine facilities with a wealth of experience in the requirements of the mining industry. Standard Machine provides complete engineering and manufacturing of gear drives for conveyors, take-up winches, crushers and apron feeders. In addition to custom gear drives, Standard Machine manufactures gears up to 37 feet for mill applications as well as provides carburized gearing for every mining need. Standard Machine also manufactures replacement gearing for electric shovels such as crowd pinions, shipper shafts, propel and swing transmissions. Contact Standard Machine and ask for its reverse engineering services, or for its expedited service to reduce downtime along with a comprehensive 24-hour customer service for all your particular requests and needs.

Contact:Standard Machine, Timken Gears & Services – CanadaDelmer UrrozDirector Of Sales – International Address: 868-60th Street East Saskatoon, Saskatchewan S7K 8G8, Canada Office: 1-306-249-9462 Cell: 1-306-371-1571 Phone: 1-306-931-3343 Toll Free: 1-800-329-4327 (GEAR) Fax: 1-306-931-4741 Email: [email protected]: www.standardmachine.ca

Shaw Almex Industries is an industry leader in the design and manufacture of a full range of vulcanizers and presses for splicing all types of belting and stationary presses in the fabrication of flat and profile conveyor belting. Most recent innovations include the permanently mounted BeltGard conveyor scanning systems; ALMEXPAD, a rugged industrial tablet with a wide array of features; and a new line of OTR tire repair vulcanizing presses. Almex offers certified splice training, expert hot-splice troubleshooting and splice consulting through the Almex Institute. The Fusion Systems division of Almex Group provides splicing tools and repair materials to

complement the advanced Almex conveyor-belt vulcanizers. The product lineup includes pulley lagging, CeraTex ceramic lagging, lining, hot and cold bond-splicing cements, repair materials, EZ Fix and one of the largest selections of hand and power tools in the industry.


Contact: Tim Shaw President & CEO Susan Moir Director, Vulcanizer Sales Address: Shaw Almex Drive P.O. Box 430 Parry Sound, Ontario P2A 2X4, Canada Phone: 1-705-746-5884 Toll Free: 1-800-461-4351 Fax: 1-705-746-9484 Email: [email protected] Website: www.almex.com

lshaw aLmex industries


Camera Systems, MobileBulk Material Handling Equipment, Systems & Engineering Services

Motion Metrics International Corp. specializes in providing advanced monitoring solutions designed to improve safety, efficiency, and productivity in the mining industry. Its products are the result of more than 14 years of research and development focused on challenges faced in mining operations all over the

globe. With over 200 systems deployed in more than 45 large-scale open-pit mines, Motion Metrics has established a strong reputation for providing reliable products backed with comprehensive support and services. Its embedded computing systems employ rugged cameras, sensors, and custom-designed

software to address various challenges that often occur in operating mining shovels, loaders, and conveyor belts. Furthermore, Motion Metrics has developed the MetricsManager, which effortlessly connects vital information from the mining equipment systems to the office computers and portable devices used by mine managers, engineers and technicians.

Contact:Joseph Tsang Sales and Support ManagerAddress: Suite 2892366 Main MallVancouver, British ColumbiaV6T 1Z4, CanadaPhone: 1-604-822-5842Fax: 1-604-677-5191Email: [email protected]: [email protected] Website: www.motionmetrics.com

lmotion metriCs internationaL Corp.

PROVIX Inc. manufactures, assembles and installs custom camera systems for all mining applications – from wireless remote video systems and safety cameras for mining equipment to loading pocket, chute, breaker, bin and conveyor monitoring. PROVIX can provide cost-effective analogue or digital camera systems that offer a safer, more productive operating environment through vision enhancement. PROVIX remote video systems are used for scoops, loaders, LHDs and drill rigs. They provide remarkably clear video for mucking, drilling and bolting while allowing operators to remain out of harm’s way. Loading pocket cameras transmit video to haul-truck drivers and control-tower monitors. Remote video systems offer extended runtimes

through integrated battery packs or machine-power connections. Wireless inspection camera systems can include integrated recording capability and enhanced lighting for stope, brow, pass, bin and drift inspection while viewed from the safe operator station. PROVIX also supplies broadband back-up alarms as well as LED and HID equipment lighting from the world’s finest manufacturers. PROVIX distributes RESCOM cabled communication for mining, tunneling and mine rescue. Visit PROVIX.net for additional information.

Contact: Dave WinfieldEmail: [email protected] Address: 6436 Hwy. 89 East Alliston, Ontario L9R 1V2, Canada Phone: 1-705-435-2242 Toll Free: 1-866-542-1343 Email: [email protected] Website 1: www.EquipmentLight.com Website 2: www.provix.netWebsite 3: www.EquipmentLight.com

lprovix inC. (division of winsted group inc.)


lairworks Compressors Corp.

Airworks Compressors Corp. is Canada’s most versatile manufacturer of the lightest, smallest air compressor systems, components and ancillary equipment available in the world, with a present product offering that ranges from 40 to 235 cfm, with optional 240 amp welder and generator packages (from 4 to 6 kw). The most recent product available is the Twister E60 – an up to 60 cfm rotary screw D.C. battery powered air compressor that will revolutionize the air compressor world. Available heli-portable packaging makes Airworks’ products ideal for transport to remote locations. Booster packs, positive air shutdowns, hose reels and APUs are just some of the items on its ancillary equipment list. Emphasis is placed on designing and manufacturing highly versatile, innovative and premium quality air

compressors with multiple options available. Airworks’ experienced team provides integrated solutions tailored to your most demanding specifications. With its commitment to continually improving its products to meet its customers’ ever-changing needs, Airworks explores the latest technologies and incorporates them in equipment that delivers enhanced performance, efficiency and safety. Airworks’ strong ability to listen and understand your product needs fuels its innovative conscience and keeps the team focused on progress, performance and value with a commitment to deliver beyond your expectations.

Contact: Darryl Weflen, President Sheila Stang, VP of Operations Address: 14503-115 Avenue Edmonton, AlbertaT5M 3B8, CanadaPhone: 1-780-454-2263Toll Free: 1-877-454-2263Fax: 1-780-452-9969Email: [email protected] Website: www.airworkscompressors.com

Camp Management Services & Supplies

Compressors, Air

Black Diamond Group Limited is one of the fastest growing modular building, remote lodging and energy services companies in North America. With its corporate head office in Calgary, Alberta, 16 office locations across Australia, Canada and the United States and worldwide strategic alliance partners, Black Diamond provides world-class services to a full spectrum of industries including energy, mining, power, construction, military, government and education. Founded in 2003, Black Diamond Camps rents and sells remote workforce housing and provides associated services; Black Diamond Logistics provides turnkey lodging services, remote-facility management

and supply-chain solutions; BOXX Modular specializes in renting and selling a broad range of modular work-space solutions and Black Diamond Energy Services rents and sells a complement of oilfield equipment and services. Its team of experienced professionals is able to coordinate all aspects of a short or long-term project. Black Diamond provides best-in-class accommodation, surface equipment, portable offices and storage solutions to its domestic and international clientele.

Contact: Guillermo Sordo International Sales Address: Suite 2000 715-5th Avenue SW Calgary, Alberta T2P 2X6, Canada Phone: 1-403-206-4747 Fax: 1-403-264-9281 Email: [email protected] Website: www.blackdiamondlimited.com

lbLaCk diamond group Limited


Consulting Geologists & EngineersCamp Management Services & Supplies


Geologists survey a porphyry zone at Lake Shore Gold Corporation’s Timmins West Complex, Ontario, Canada.

Lassing Dibben is a consulting engineering company located in Canada specializing in the field of bulk material handling with the capacity to handle all aspects of system design. Lassing Dibben’s highly qualified engineers and technicians put their experience and knowledge to work in the mining, marine, energy and process industries. As part of EPCM teams, the firm has an extensive background in conceptual-system design of stock-piling and ship-loading facilities to the detailed design of conveyor systems, stackers, reclaimers and all related structures. From initial feasibility studies to construction and commissioning, Lassing Dibben has successfully completed projects

worldwide and has handled a diverse array of different materials. Lassing Dibben also provides a broad range of general engineering services to producers, manufacturers, consulting engineers, equipment manufacturers, contractors, government agencies, utilities and developers.

Contact:Harold Dibben Gary Lewis Address: P.O. Box 472 149 North Murray Street Trenton, Ontario K8V 5R6, Canada Phone: 1-613-392-9287 Fax: 1-613-394-4173 Email: [email protected] Website: www.lassingdibben.com

lLassing dibben ConsuLting engineers Ltd.

SCOPEOFSERVICES

•MaterialHandlingEquipmentDesignandEngineering

•BulkMaterialStorageSystems

•BulkBinandAdditiveSystems

•Structural/CivilDesignandEngineering

•DetailDesignandEquipmentSpecificationsforNewandRetrofitInstallations

•FeasibilityStudies

•SystemAudit/Evaluation

•CapitalCostEstimates

•ConstructionSupervision

•Start-upandCommissioning

•updateofExistingPlantDocumentation

•SitePlans


Consulting Geologists & Engineers

A.C.A. Howe International Limited is an independent geological and mining consulting firm with more than 30 years of continuous service to its wide range of clients. Services are provided from its offices in Toronto and Halifax (Canada), and London (UK), and include project management; technical due diligence and preparation of National Instrument 43-101 and AIM-compliant reports, including

pre-feasibility and feasibility studies for Canadian and United Kingdom stock exchanges; mineral property valuations; QA/QC management and audits; mineral deposit modeling and resource-reserve estimations.

Contact:Felix Lee, President Address: Suite 501 365 Bay Street Toronto, OntarioM5H 2V1, CanadaPhone: 1-416-368-7041Fax: 1-416-368-2579Email: [email protected] Website: www.acahowe.ca

la.C.a. howe internationaL Limited

lCentre for exCeLLenCe in mining innovation (Cemi)


The Centre for Excellence in Mining Innovation (CEMI) directs and coordinates step-change innovation in the areas of exploration, deep mining, integrated mine engineering, environment and sustainability for the metal mining industry. With a seasoned team of program directors, CEMI identifies, assesses and manages industry-focused applied research and development projects that

extend from geology and engineering to the natural sciences. CEMI recognizes innovation is a three-phase process: research, development and implementation (R & D, I). With implementation, CEMI turns innovative ideas into best practices.

Contact: Douglas Morrison President and CEO Address: 935 Ramsey Lake RoadWillet Green Miller Centre Sudbury, OntarioP3E 2C6, CanadaPhone: 1-705-673-6568Fax: 1-705-671-3878Email: [email protected] Website: www.miningexcellence.ca

DRA Americas Inc. is a subsidiary of an international full-service engineering company that provides services from conceptual studies to mining, mineral processing and infrastructure design and engineering. DRA has a client-centred flexible approach and adapts its services to suit your needs – exactly: the company believes that it is not about DRA, it’s about you. DRA knows that time and money matter to you and that every hour that you are not producing is an hour in which you are not generating profits. DRA is totally focused on project delivery that is high quality, on

time and on budget. It also believes less is more and keeps its teams small and lean but makes sure they are staffed with the best possible people for the job. For your project, you can count on

DRA to dedicate a focused team of experienced engineers who will cost you less and get your product to market faster.

Contact:Wray CarvelasPresident & CEO Address: Suite 30044 Victoria Street, Toronto, OntarioM5C 1Y2, CanadaPhone: 1-416-800-8797Fax: 1-647-977-9065Email: [email protected]: www.draa.ca

ldra ameriCas inC.



lCentre for exCeLLenCe in mining innovation (Cemi)


Golder Associates is an international group of consulting companies specializing in mining, geotechnical engineering, environmental science, water resources engineering and applied geosciences. Employee-owned since its formation in 1960, Golder has grown to include 180 offices located throughout Africa, Asia, Australasia, Europe, North America and South America. Golder employs more than 8,000 employees who have created a unique culture with pride in ownership, resulting in long-term organizational stability. Golder understands the mining business and partners with clients throughout the mine lifecycle to overcome their cultural, environmental, geological and

engineering challenges. Golder offers integrated sustainable solutions that balance the needs of the environment and society from existing to complex projects, extreme weather, and remote locations. With its technical expertise, Golder Associates is committed to finding innovative approaches that serve the global mining industry in the safe, responsible development of mineral resources that support sustainable societies.

Contact: Catharine ShawMining Client Program Manager, CanadaEmail: [email protected]: Suite 1220 141 Adelaide Street West Toronto, OntarioM5H 3L5 Canada Phone: 1-416-366-6999 Cell: 1-647-242-0964 Fax: 1-416-366-6777 Email: [email protected] Website: www.golder.com

lgoLder assoCiates Ltd.

Kovit Engineering provides expertise globally in the areas of mine backfill and application of paste and thickened tailings technology for tailings management across the world. Its unique blend of experienced mining professionals matched with innovative thinkers has built a team that consistently provides simple, yet practical project solutions. Kovit explores all options for your operation to provide a path forward with optimized mining

productivity, plant throughput, improved fill quality, all the while generating long-term value by looking at overall costs of tailings. Each facility has its own site-specific challenges and opportunities, making each project unique in approach and solution. Thus, the solutions Kovit provides for you are designed to maximize value. For practical and valuable improvements, think Kovit Engineering and call for a free consultation.

Contact: Mireille Ulibarri, Office Administrator Address: 311 Harrison Drive Sudbury, Ontario P3N 5E1, Canada Phone: 1-705-523-1040 Fax: 1-705-523-1041 Email: [email protected] Website: www.koviteng.com

lkovit engineering

you can source online for almost any product, service or technology used in mining and supplied by Camese members.

www.camese.org



Met-Chem Canada Inc. is an internationally renowned consulting engineering company established in 1969 that provides services to the mining, mineral processing and metallurgical sectors. Its range of technical services cover the preparation of studies (conceptual, feasibility, bankable feasibility and detailed reports), design engineering, EPCM, process development, mineral resource estimation, 43-101 reports, audits, pit design and mine development, training and operations assistance as well as environmental studies. Met-Chem’s specialists have experience in the iron ore, pelletizing and steel-making, coal, gold, base metals and industrial minerals sectors. Met-Chem has a

strong client approach and has built its reputation on the talent and commitment of its staff to provide solutions to clients, in any stage of the development of their project, by using proven management methods to ensure strict control of cost and schedule. Met-Chem’s dedication to quality and excellence is second to none as shown by its long-term relationships with clients around the world.

Contact:Guy Noiseux, General Manager Corporate DevelopmentEmail: [email protected] Address: 3rd Floor 555 René-Lévesque Blvd. West Montréal, Québec H2Z 1B1, Canada Phone: 1-514-288-5211, ext. 212 Fax: 1-514-288-7937 Email: [email protected] Website: www.met-chem.com

lmet-Chem Canada inC.

Norwest Corporation is an international employee-owned energy, mining and environmental consulting company. Over the past 30 years, Norwest has grown to offer a wide range of services to the energy, minerals and natural resource industries. These include geoscience, engineering and consulting for the evaluation and development of coal, unconventional gas, oil sands, oil shale, industrial minerals as well as base and precious metals projects. In the environmental arena, Norwest brings an integrated approach to environmental assessment and regulatory support, environmental planning and management, and water resources. Norwest’s geoscience and geotechnical engineering expertise comes into play from the initial feasibility study through to operational monitoring, reclamation and environmental remediation. Norwest’s extensive experience in management,

lnorwest Corporation

SERVICES:

• resource evaluations

• geology & hydrogeology

• geostatistics

• simulations

• mine engineering

• geotechnical engineering

• Contaminant remediation

• data management

• environmental management

• reclamation

• project management

• field services

• processing engineering & design

• financial evaluations

• Co2 sequestration

operations, planning, analysis, marketing and government relations enables it to provide a full range of due diligence services, including bankable feasibility studies.


Contact: Steve Cameron President Address: Suite 2700 411-1st Street S.E. Calgary, Alberta T2G 4Y5, Canada Phone: 1-403-237-7763 Fax: 1-403-263-4086 Email: [email protected] Website: www.norwestcorp.com



Piteau Associates offer a comprehensive range of geotechnical, hydrogeological and environmental consulting services to the mining and resources sectors worldwide. Established in 1976, Piteau Associates provides practical, innovative, cost-effective and environmentally responsible solutions that assist clients in meeting their engineering challenges. Areas of specialized practice include rock mechanics, soil mechanics, geotechnical engineering, hydrogeology, engineering geology, structural geology, photogrammetry, terrain mapping and environmental engineering. Projects include open-pit slope design, slope depressurization, mine-water management, waste dumps, underground openings, plant-

site foundations, landslides and geological hazards, route and site selection, roads and pipelines, sedimentation and retention ponds, acid rock drainage and mine-closure planning. With offices in Vancouver (Canada), Santiago (Chile) and Lima (Peru), Piteau Associates has added value to more than 200 mining projects from Alaska to Tasmania, and from Chile to China.

Contact:Mark Hawley, PresidentAddress: Suite 215 260 West Esplanade North Vancouver, British ColumbiaV7M 3G7, CanadaPhone: 1-604-986-8551Fax: 1-604-985-7286Email: [email protected] Website: www.piteau.com

lpiteau assoCiates

Snowden Mining Industry Consultants Inc. has been delivering the highest quality solutions to the mining and related industries since 1987. Snowden’s world renowned specialists provide independent, expert technical advice that spans the mine lifecycle – from exploration and resource evaluation, risk assessments, mine planning and optimization, to mine data management and reconciliation. Snowden enables customers to extract real bottom-line value through the application of expert technical skills and a focused investment in innovation. This

approach combines world-class industry expertise and dedicated technology development resources to deliver practical solutions to customers worldwide. Snowden’s professionals work closely with their clients to develop the solution that will best fit each client’s unique requirements with a focus on efficiency, productivity and profitability. Snowden places considerable importance on developing long-term relationships with each client to realize ongoing value from project opportunities. The knowledge and practical expertise of the Snowden consultants is shared with industry colleagues through an extensive international calendar of technical professional development courses and mentoring. Snowden is committed to the delivery of international best-practice analytical services and products.

Contact: Bob McCarthy General Manager Address: Suite 600 1090 West Pender Street Vancouver, British Columbia V6E 2N7, Canada Phone: 1-604-683-7645 Fax: 1-604-683-7929 Email: [email protected] Website: www.snowdengroup.com

lsnowden mining industry ConsuLtants inC.

Camese Compendium of Canadian Mining Suppliers www.camese.org 47 46 Camese Compendium of Canadian Mining Suppliers www.camese.org

Analytical Laboratories and Supplies Analytical Laboratories and SuppliesCorporate Social Responsibility

Established in 1985, Cowater International Inc. is a private Canadian management consulting firm specializing in international development. Cowater offers services in program and project management that can assist mining companies and governments in developing, managing and implementing their CSR programs for the mutual benefit of all stakeholders. Cowater’s technical and professional expertise is based on four core areas: water, sanitation and environmental management; social development; municipal services and enterprise development; and financial management, audit and accounting.

The firm has extensive cross-cultural experience through its work in more than 70 countries on five continents, working with clients that include international donor agencies, national governments, rural and urban communities and the private sector. Cowater’s diverse team of professionals is able to handle a range of assignments from small studies to multi-million dollar initiatives, from design and planning through

implementation, including monitoring and evaluation, capacity building and training activities. The firm has strong capacity and experience working in English, Spanish, French and Portuguese-speaking countries.

Contact: Norman Looker CSR ServicesAddress: Suite 400411 Roosevelt Avenue Ottawa, Ontario, K2A 3X9, CanadaPhone: 1-613-722-6434Fax: 1-613-722-5893Email: [email protected]: www.cowater.com

lCowater international inC.

lpdaC – e3 plus: a Framework For responsible exploration

PDAC – e3 Plus: A Framework for Responsible Exploration was developed by the Prospectors & Developers Association of Canada (PDAC) and launched in March 2009 to help mineral exploration companies improve their corporate social responsibility practices. The framework was compiled through extensive consultation with industry representatives, NGOs, academia, government and communities. e3 Plus is built around eight principles for

responsible exploration and includes guidance notes and toolkits with comprehensive information on social responsibility, environmental stewardship, as well as health and

safety. e3 Plus is a free information resource accessible through the PDAC website: www.pdac.ca/e3Plus

Contact: PDACAddress: 135 King Street East Toronto, Ontario M5C 1G6, Canada Phone: 1-416-362-1969 Fax: 1-416-362-0101 Email: [email protected] Website: www.pdac.ca

In addition to providing members with information and advice, advocacy and an international marketing program, CAMESE – the Canadian Association of Mining Equipment and Services for Export – is most interested in providing foreign brokers or end-users with reliable sources of all types of goods and services used in the mining industry.

www.camese.org


Analytical Laboratories and Supplies Analytical Laboratories and Supplies

ltnr industrial doors

Diesel Engines and Accessories

Firwin Corp. is a manufacturer of retrofit removable/reusable insulation blankets and permanent insulation systems for complete exhaust systems, including engine exhaust manifolds, turbochargers, piping, silencers or purifiers. Firwin’s products are used in numerous industries, including underground and open-pit mining. Input from leading mining companies to Firwin’s ongoing R & D has resulted in two insulation products designed to meet the challenges of the mining industry: the Minewrap™

product line, a unique, innovative, solution-driven line of removable insulation blankets specially designed for the rugged environment and demanding safety standards in mines; and Firwin HC Hard Coat insulation, a permanent, high-temperature insulation, ideal for limited space applications where the ability to remove the insulation is not required.

MineWrap™ and Firwin HC protect operators from burns, shield fuel lines and cables from heat, reduce ambient heat in confined spaces, reduce the danger of fire when diesel and hydraulic oils spray onto hot piping, and help ensure optimal catalyst pollution burn-off. Choose Minewrap™ and Firwin HC insulation systems as your system of choice in mines where you need proven and superior safety and reliability.

Contact:Paul Herman, PresidentAddress: 1685 Flint Road North York, OntarioM3J 2W8, CanadaPhone: 1-416-745-9389Phone Toll Free: 1-877-FIRWIN7 (347-9467)Fax: 1-416-745-0782Email: [email protected] Website: www.firwin.com

lFirwin Corp.

MineWrap™Removable Insulation Blankets

For your Engine and Exhaust Components

Firwin HC Hard Coat insulation

Doors

TNR Industrial Doors is a Canadian-based company specializing in the manufacturing of high-performance doors. TNR’s leading products are rubber doors. The company’s success is

a result of its “Secret Sauce:” dedicated people working together and having fun. High-performance doors are custom doors and require a knowledgeable workforce and flexible production planning. The combined workforce of TNR provides more than 400 years of experience. Their ability to be flexible and innovative, not only in design but also in problem solving, is one of the strengths of TNR. The company’s products are distributed globally through its dealer network. Its high-performance doors out-perform and cost less to operate than traditional rolling steel doors. Repairs to the doors are inexpensive and, when

impacted, can be back in operation in a very short time. TNR uses continuous improvement philosophy and employs lean management techniques to stay on the leading edge of the industry.

Contact: Wayne Carr National Sales ManagerAddress: 200 Fairview Road Barrie, Ontario, L4N 8X8, CanadaPhone: 1-705-522-8880Toll Free: 1-866-792-9968Fax: 1-705-735-9564Email: [email protected] Website: www.tnrdoors.com

Tough industrial and commercial rubber roll-up doors.


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesDrilling Contract Services

Energold Drilling is a global drilling contractor with the largest fleet of frontier mineral rigs that service the international mining and energy sectors in 24 countries across the Americas, Africa and Asia. Energold explores in innovative ways using portable drilling rigs that can mobilize without infrastructures to minimize environmental impact while also generating maximum social impact by employing locals. An industry-recognized leader in drilling, Energold has won such awards as “Environmental Excellence in Exploration” from the PDAC and

“Exploration – Capital Equipment” from the Mining magazine. Additionally, its Energy division provides oil sands coring, geotechnical drilling and seismic drilling for the oil and gas sector as well as for larger projects, while Energold Manufacturing provides custom-built, multi-purpose mineral and water-well rigs. With industry-leading portable and conventional rigs, expertise and a rigorous HSE (health, safety and environmental) standard, Energold is the drilling contractor of choice to explore and advance your project, no matter where it is in the world.

Contact: Fred DavidsonCEOEmail: [email protected] Jerry HuangManager Investor RelationsEmail: [email protected] Address: Suite 1100 543 Granville Street Vancouver, British Columbia V6C 1X8, Canada Phone: 1-604-681-9501 Fax: 1-604-605-3816 Email: [email protected] Website: www.energold.com

lenergold drilling group

Major Drilling Group International Inc.’s drill fleet is the most varied and versatile in the industry, totaling more than 765 drills, ranging from low-impact, man-portable drills to large deep-hole, multi-purpose machines. Major has branch offices in more than 22 countries around the world and expertise in every aspect of the business, such as surface and underground coring, directional, reverse circulation, multi-purpose, grade control, sonic, geotechnical, environmental, water-well and coal-bed methane as well as shallow gas drilling. Major is always eager to partner with its clients to provide a customized approach to every project.

Major is committed to adhering to the highest health, safety and environmental standards, and its team of safety and environmental personnel has created the most stringent policies and programs in the industry. Major Drilling Group International Inc. is a TSE-listed company (MDI) with operations in Canada, the United States, South and Central America, Australia, Asia and Africa. Visit www.majordrilling.com to find out more.

Contact:Robin Sauve Email: [email protected] Address: Suite 100 111 St. George Street Moncton, New Brunswick E1C 1T7, Canada Phone: 1-506-857-8636 Fax: 1-506-857-9211 Email: [email protected] Website: www.majordrilling.com

lmajor drilling group international inC.

CAMESE was originally founded in 1981 as Ontario Mining Equipment and Services for Export.

www.camese.org




Three drills operate in a drilling program on Pearl Lake in Timmins, Ontario, Canada.

Drilling Equipment & Supplies

When BBS Exploration acquired the manufacturing and marketing rights to the JKS/BBS Boyles line of surface exploration drills from Atlas Copco Exploration Products (North Bay) in 2008, it inherited the legacy of their reputable product lines to manufacture the most relied-upon drilling

lbbs exploration a division of tHe pritCHard group

bbs exploration provides the following products and services:

• BBS 37 and 56 Exploration Drills

• Genuine OEM replacement parts (in stock)

• Genuine replacement assemblies (front ends, hoists, swivel heads)

• Complete drill and assembly refurbishment

• Drill re-power solutions (engines and transmissions)

• Hydraulic system upgrades

• Complete mud pump packages (hydraulic- or diesel-powered)

• BBS Rod Break System (hydraulically actuated breaking system)

equipment today. Now a division of The Pritchard Group, BBS Exploration (Diamond Drill Sales. Parts. Service.) understands the challenging conditions in which you operate and the importance of having minimal downtime. In fact, whenever you deal with BBS Exploration, you can rely on

genuine BBS parts and assemblies to keep your equipment running. As the OEM for the BBS 25, 37 and 56 exploration drills, it is the BBS goal to carry on providing you with quality parts, product safety, innovative solutions and assemblies at competitive prices. For more information on BBS products and services as well as updates on NEW monthly product specials, please contact BBS Exploration or visit its website at www.bbsexploration.com.

Contact: Jon Loewen, Manager Email: [email protected] Seniuk, CSR Email: [email protected] Address: 111 Bannister Road Winnipeg, Manitoba, R2R 0P2, Canada Phone: 1-204-632-0639 Toll Free: 1-800-665-7665 Fax: 1-204-632-0171 Website 1: www.thepritchardgroup.com Website 2: www.bbsexploration.com


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesDrilling Equipment & Supplies

latlas CopCo exploration produCtsAtlas Copco Exploration Products is a company in the Atlas Copco Group, a global industrial company that develops, manufactures and markets products and services to a wide range of customers and end users. Headquartered in North Bay, Ontario, Atlas Copco Exploration Products specializes in products for the mineral exploration industry. It manufactures a complete range of diamond core drilling equipment and distributes its products globally. Exporting Canadian-made products into the major mining areas of the

world is handled through the network of Atlas Copco local customer centers and independent distributors. It's extensive range of products includes everything from the top of the drill rig to the tip of the bit. It's collection of equipment includes well-known products such as Christensen surface

core drills, Diamec underground core drills, In-hole tools, Craelius, Hobic, Excore diamond products and Swellex rock bolts.

Contact:Brenda Hamilton Communication Professional Address: 125 Ferris Drive North Bay, Ontario, P1B 8Z4, Canada Phone: 1-705-472-3320 Fax: 1-705-494-1852 Email: [email protected] Website: www.atlascopcoexploration.com

Canadian-owned Canun International of Val Caron (Sudbury), Ontario, designs and manufactures pneumatic rock drills for the mining, quarrying (granite) and construction industries. Products include Canun Airleg Drills, Stoper Drills, Sinkers, Quarry Drills, Canun Service Parts and the Canun ‘Canpush’ Screen Pusher. Canun products are manufactured in Canada on modern CNC equipment, which performs all milling, turning and drilling operations. Super-precision grinding provides the high-tolerance finishes and accurate fits that are so critical for today’s mining machines. Every part Canun produces is inspected for consistency and

interchangeability. Canun is continually applying new or emerging technology to develop and strengthen its ability to meet market needs. Canun International is ISO 9001:2008 registered.

Contact:Peter Cirelli, President Email: [email protected] Address: 2896 Belisle Drive Val Caron, Ontario, P3N 1B3, Canada Phone: 1-705-897-0400 Toll Free: 1-800-461-6226 Fax: 1-705-897-3250 Email: [email protected] Website: www.canun.com

lCanun international

Pneumatic Rock Drills by Canun

Mincon Mining Equipment Inc., a wholly owned subsidiary of Mincon International Ltd., has been operating in Canada since 1989 as a major manufacturer of rock drills – both pneumatic and hydraulic – and a supplier of high-quality replacement parts for Tamrock, Atlas Copco, and Secoma drills. Mincon provides complete drill and feed packages for all types of jumbo and long-hole drilling rigs. Mincon also runs a rebuilding facility in Vancouver, which specializes in hydraulic jumbo/track drill rebuilds

as well as the restoration of all types of mining equipment. With its main warehouse and rebuild shop in Vancouver, Mincon continues to give customers the best in rock-drill technology at cost-effective prices. Mincon Mining Equipment Inc. stocks a full range of DTH hammers and DTH drill bits, manufactured by its parent company, which is regarded as a world leader in DTH hammer production. For full DTH product and technical specifications, please visit Mincon’s website at www.mincon.com.

Contact:David Browne CANADIAN OFFICE Address: 9669-201 Street Langley, British Columbia V1M 3E7, Canada Phone: 1-604-881-4476 Fax: 1-604-881-4479 Email: [email protected] Website: www.minconmining.com

lminCon mining equipment inC.



Control Chemical (1989) Corporation has been a manufacturer of high-performance drilling fluid systems and proprietary vegetable oil lubricants under the MATEX brand name for 22 years. Starting with a facility of 6,000 square-feet, MATEX products are now

manufactured in a modern plant of 50,000 square-feet. In 2010 and 2011, more than $800,000 was invested in plant upgrades to increase production and manufacturing efficiency, along with Control Chemical’s commitment to plant and employee safety programs. These products include drilling polymers, foams, tool lubricants, blasthole stabilizers, thread compound, rock drill oil, and non-alcoholic anti-freeze fluids. Control Chemical’s unique expertise has been mainly focused on the mining industry for diamond drilling, percussive drilling and blasthole stabilization (underground and surface) using

proprietary fluid technology. The MATEX system is known for increased core recovery, reduced downtime and simplified user-friendly fluid systems. R.D.O. 302 E.S., a vegetable oil rock-drill lubricant, is the industry standard for performance. MATEX products are the choice of major mining companies and internationally known drilling contractors.

Contact: Bob Coak Production Manager LubricantsEmail: [email protected] Address: 7016 30 Street South East Calgary, Alberta, T2C 1N9, Canada Phone: 1-403-720-7044 Toll Free: 1-800-267-6840 Fax: 1-403-720-4951 Email: [email protected] Website: www.matex-ccc.com

lControl CHemiCal (1989) Corporation

Dimatec Inc., since the company’s formation in 1988, has specialized in the manufacturing of impregnated, surface-set, TSP-set and PDC-set core bits as well as other related metal-bond ‘down the hole’ tools that are primarily used by the mineral exploration and geotechnical survey industries. Dimatec uses only the highest quality raw materials and state of the art processing technology to manufacture its products that have been designed for use in all drilling conditions. Dimatec’s objective is to meet and exceed their customer’s requirements for high performance in-hole drilling equipment. This objective is achieved through an experienced workforce and an ongoing commitment to research and development. Dimatec has implemented and maintained a registered quality management system that is compliant with the ISO 9001:2008 standard and the ISO/TS 29001:2010 specification. Dimatec’s

ldimateC inC.quality objective, through continuous improvement and product development, is to maintain their position as the recognized standard of quality, value and service.

Contact:Blayne Farebrother, Pat Chamberlin Technical Sales & Marketing Address: 180 Cree Crescent Winnipeg, Manitoba R3J 3W1, Canada Phone: 1-204-832-2828 Toll Free: 1-866-202-5875 Fax: 1-204-832-4268 Email: [email protected] Website: www.dimatec.com



Foremost designs and manufactures a diverse line of heavy equipment, tooling, consumables and accessories for a variety of applications worldwide. For the mining/mineral exploration sector, Foremost specializes in drilling rigs, reverse circulation drill pipe, semi-automatic, rig-mounted pipe handlers and drilling consumables. These products generate significant cost savings,

reduce maintenance requirements, and improve drilling productivity and equipment life. The Foremost Exploration Series of drilling rigs, either tracked or wheeled, and support vehicles, are designed to minimize ground pressure and to climb extremely steep grades and side slopes. Foremost Floating Cushion Subs and Shock Subs protect and prolong top drive bearings, rotary drive, mast

assemblies and gear life against both torsional and axial vibrations/shock loading in moderate and extreme drilling conditions, while enabling make up and break out of threaded connections. Replacing a friction or non-rotating bushing on the deck of a blast-hole drill without drill modifications, the Foremost Rotary Deck Bushing provides stabilization, reduces drill vibrations and friction to drill string components and permits higher operating speed. Foremost offers a proven successful track record to suit customers’ requirements.

See Country Interest Section forWorldwide.

Contact:Doug Secord, Technical Sales Address: 1225 64th Avenue North East Calgary, Alberta, T2E 8P9, CanadaPhone: 1-403-295-5819Fax: 1-403-295-5810Email: [email protected] Website: www.foremost.ca

lForemost

MPX Drilling Systems is a Canadian manufacturer of unique, high-performance diamond drilling systems

that ensure low impact on the environment. The MP300 is the only man-portable hydraulic core drill on the market, able to achieve 300 meters “B” size core, and set casing in overburden beyond 100 meters. The modular design allows for ease of transport by a variety of methods, without the assistance for heavy equipment, and weighs less than 300 kg fully assembled. It is easily adaptable to the most challenging terrain and enables quick set up and the ability to drill anywhere. This innovative drilling solution is perfect for exploration, prospecting and developing in the mining industry. MPX also offers a wide range of products including drills for surface

and underground applications, pumping units, rods, casing, core barrels, diamond products and accessories. MPX technicians are available for on-site training and personalized support. For further details, please contact MPX Drilling Systems directly.

Contact: Wayne Parnell VP of Operations, Marketing & SalesAddress: 199 Mumford Road Lively, Ontario P3Y 1L2, Canada Phone: 1-705-692-5816 Fax: 1-705-692-9067 Email: [email protected] Website: www.mpxdrillingsystems.ca

lmpx drilling systems A division of Talos Steel Ltd.



lmaxidrill inC.

MAXIDRILL, established in 1992, uses sophisticated 3D engineering software to create new, innovative drill-rig designs. These unique rigs – like the RC Drill Rig MAX-400 RC and the Diamond Drill Rig MAX12M, both with options of 12-ft. and 24-ft. masts – are manufactured at MAXIDRILL’s facilities. MAXIDRILL’s drilling expertise has been the base to develop a new diamond drill rig series that include the MAX10C, MAX18C and MAX30C, all track-mounted with drilling capacities from 2,300 ft. to

5,250 ft. in its factory headquarters. For the geothermal, reverse-circulation and water-well industries, MAXIDRILL supplies the HARDAB series, a one-man operated drill rig with a patented rod-handling system. It handles 600 ft. of 3.5-in. (or 4-in. RC) x 10-ft. rods. MAXIDRILL is proud to offer its reliable units with great efficiency and performance, at the most economic prices in the market. MAXIDRILL has three locations for parts and service: Laval, Québec, Canada; Ft. Lauderdale, Florida, USA; and Lima, Peru.


Contact: Bernard Messier, PresidentAddress: 1319 Bergar Laval, QuébecH7L 4Z7, CanadaPhone: 1-450-669-3332Fax: 1-514-221-2356Email: [email protected] Website: www.maxidrill.com

Hayden Diamond Bit Industries Ltd. is a young and dynamic company founded in 2001. Hayden designs diamond-impregnated drill and coring bits for the mining industry. The combined expertise in designing, engineering and manufacturing places Hayden at the forefront of drill bit technology. Using state-of-the-art furnace techniques and experts in powder metallurgy enables Hayden to manufacture a broad range of matrices to achieve the best possible bonds for everyday drilling demands. Hayden strives to improve its products and to

test new matrices/innovative designs through continued commitment to research and development. Quality control, outstanding customer service and dedicated delivery assures Hayden’s clients receive consistent products, on time, where needed. With clients in Asia, Australia, North America, South America and South Africa, Hayden is capable of designing

and manufacturing diamond-coring bits to fit your specifications within industry standards for worldwide mining exploration.

Contact:Eric Gaunder President Address: 12020 No. 5 Road Richmond, British Columbia V7A 4G1, Canada Phone: 1-604-341-6941 Fax: 1-604-271-6944Email: [email protected] Website: www.haydenbit.com

lHayden diamond bit industries ltd.



lmining teCHnologies international inC. (mti)

Canadian-owned Mining Technologies International Inc. (MTI) operates three modern manufacturing facilities, which produce a wide range of advanced equipment. MTI Mobile offers customers a full range of hydraulic drill jumbos, shaft-drilling jumbos, long-hole jumbos, in-the-hole (ITH) drilling rigs, automated ITH drills, LHD loaders, dump trucks, and rail haulage systems including mine locomotives, rail cars, chutes, and dump stations. With a long history in the drilling industry, MTI Consumables manufactures a full complement of high-quality drill string components for drilling large-diameter raises, blast holes, exploration holes and ITH applications. Serving MTI’s customers for more than 35 years, MTI Cylinders provides the industry with a complete high-quality OEM

and repair solution for pneumatic and hydraulic cylinders. Completing the MTI lineup, MTI Aftermarket ensures that all MTI tools maintain optimum performance throughout their life cycle.

Contact: Erin Newell Marketing Administrator Corporate Headquarters Address: 145 Magill Street Lively Ontario P3Y 1K6, Canada Phone: 1-705-692-3661Toll Free: 1-800-772-3661Email: [email protected] Website: www.mti.ca

PHQ is a global company providing hand-held drills, drifter drills and diamond-coring drills to the mineral resources industry. All machines are assembled in the PHQ facilities in Burlington, Ontario, Canada, and shipped to customers in underground mining, stone quarries, construction and exploration. Hand-held drills include JOY60, PHQ250 and PHQ220 jacklegs, stopers, sinkers, pusher-feed legs, and JOY67 mounted quarry drills, screen pushers and football-type lubricators. PHQ makes complete long-hole set ups: PHQ36-IR and PHQBBC120 drifter drills, screw feeds, centralizers, remote controls and lubricators for blast-hole drilling. PHQ diamond drills include JKS Winkie and

Packsack gasoline-powered surface drills and JKS Bazooka, VEG and VAG pneumatic-powered underground drills. PHQ supplies column bars, column clamps, mine jacks, lifting and lowering tools, high-pressure water pumps, mufflers, as well as bits, rods and accessories for diamond drills. PHQ can ship from stock high-quality parts manufactured in modern facilities, using state-of-

the-art CNC equipment. PHQ has been supplying mining customers since 1985 and is quality-certified to ISO9001-2008. PHQ developed an anti-vibration control handle that reduces transmission of harmful vibration from jackleg drills to drillers by 60 percent and supplies new anti-vibration PHQ250 jackleg drills from stock.

Contact: William Quesnel Address: C2-1175 Appleby Line Burlington, Ontario L7L 5H9, Canada Phone: 1-905-332-3271 Fax: 1-905-332-9497 Email: [email protected] Website: www.partshq.com

lparts Headquarters inC.



lmulti-power produCts ltd.

Multi-Power Products Ltd. is Canada’s most versatile manufacturer of turnkey drill rig systems, components and ancillary equipment with a present product offering that ranges from heli-portable Pioneer auger and Discovery core drills to its large Explorer reverse-circulation track systems. Pressure supply pumps, foot clamps and chucks, heli-portable air/booster compressors, cyclones and drill heads are just some of the items on our ancillary equipment list. While primarily catering to the mineral exploration market, Multi-Power has expanded its product range to service the geotechnical, geothermal, geophysical and

seismic industries worldwide. Aided by sophisticated 3D engineering software and computer simulation, Multi-Power’s experienced team of project managers and engineers provides integrated solutions tailored to your most demanding specifications. With its commitment to continually improving its products to meet its customers’ ever-changing needs, Multi-Power explores the latest technologies and incorporates them in equipment that delivers enhanced performance, efficiency and safety.


Contact: Tom Ulm, Sales and Marketing Address: 975 Crowley Avenue Kelowna, British Columbia, V1Y 9R6, Canada Phone: 1-250-860-6969 Mobile: 1-250-470-8977 Fax: 1-250-860-3340 Email: [email protected] Website: www.multipowerproducts.com



Mansour Mining Technologies Inc. (MMTI) is a market-leading manufacturer of integrated mining supply products including ground support, rock-drilling tools, mine ventilation and smelter, as well as refinery hardware. MMTI offers these integral products in order to keep mining operations safe, efficient and profitable. Innovation, quality and around-the-clock global service represent the core values that encompass Mansour Mining

Technologies Inc. With nearly 40 years in the mining industry, Mansour Mining Technologies Inc. understands that the key to success is to develop close working relationships with customers. MMTI builds these customer relationships from the ground down.

Contact: Roger Coutu VP Global SalesEmail: [email protected] Address: P.O. Box 640 2502 Elm Street Sudbury, Ontario P3E 4P8, Canada Phone: 1-705-682-0671 Fax: 1-705-682-4658 Email: [email protected] Website: www.mansourmining.com

lmansour mining teCHnologies inC.

Whether mud, gravel or snow, PRINOTH’s tracked carriers are reliable tools for extreme use in extreme environments. Thanks to their huge payload, the crawlers can be equipped with specialized attachments of all kinds and are thus suitable for all construction, mining and drilling operations. In short, they offer a wide variety of applications for year-round use in harsh conditions. PRINOTH’s tracked utility vehicles exert very little pressure on the

ground, which is why they can also be used in places where other wheeled vehicles would quickly get stuck. In addition, the vehicles are used to transport personnel, tools and other heavy equipment. Visit PRINOTH’s booth at the PDAC 2014 Trade Show in Toronto.

Contact:Amine Khimjee International Sales Manager Address: 1001 Rue J.-A.- Bombardier Granby, Québec J2J 1E9, Canada Phone: 1-450-531-2140 Fax: 1-450-776-3625 Email: [email protected] Website: www.prinoth.com

lprinotH ltd.



did you know Canada’s mining industry…

• Contributed $35.6 billion to Canada’s GDP in 2011?

• Creates jobs and economic growth in more than 115 Canadian communities?

• Provides the world’s second-largest mining supply sector?

• The value of minerals and metals to Canada’s economy has ranged between 2.7% and 4.5% of the country’s GDP for the past 20 years?

Source: FACTS & FIGURES 2012, The Mining Association of Canada



Western Drilling Tools supplies a comprehensive line of down-hole mining drilling tools and equipment including roller stabilizers, drill pipes, drag bits, discharge heads, reverse-circulation pipe, shock subs and hammer bits. Western Drilling Tools’ experienced team of experts can meet

your drilling needs whether it is for custom machining, production manufacturing, prototyping, break-out service, repairs, welding, fabrication and much more. They are able to identify your needs and design drilling tools that ensure a high rate of penetration and straighter holes at

exceptional value. Most drilling tools supplied to clients are manufactured in-house in a state-of-the-art machine shop. Utilizing the products and services Western Drilling Tools provides will ensure you see a quick turn-around as well as a successful project. Allow Western Drilling Tools to show you how much it cares about your business success. For more information, please visit www.westerndrilling.ca.

Contact: Dennis Burca Email: [email protected] Address: 7179-110th Avenue S.E. Calgary, Alberta, T2C 3B8, Canada Phone: 1-403-203-0826 Fax: 1-403-203-0807 Email: [email protected] Website: www.westerndrilling.ca

Core Drill BitsCasing shoesreaming shellsDiamonD Drill Bits

heaD assemBliesovershotsaDaptorsloCking Couplings

FinD us onlinewww.safaridiamonddrillbits.com

1-888-500-2487 (BITS)

Diamond Drill BitsManufacTureD In canaDa

lwestern drilling tools inC.



Analytical Laboratories and Supplies Analytical Laboratories and SuppliesElectric Power Equipment


Here is a view of the electrical room at Agnico Eagle’s Meadowbank Mine, Nunavut, Canada.

Mine Cable Services Corporation (MCS) designs and manufactures medium voltage cable connection systems, cable repair equipment and cable handling systems. MCS offers a full range of cable couplers including 5kV, 8kV, 15kV, and 25kV. Couplers manufactured by MCS are compatible with all other couplers of N.A. design. MCS junction boxes and cable posi-clamp systems have been designed to meet the rigors of

mine site environments including dust and moisture. MCS’ hydraulic cable vulcanizing system is fully automatic and uses Teflon-coated cable molds to produce flexible and waterproof cable repairs. MCS also provides a complete line of cable repair materials, including Neoprene, Hypalon, and TPU jacketing material. Cable handling and safety equipment consist of cable reelers, cable stands, strain relief clamps, cable safety locks, and cable crossover systems. With facilities in Canada and a network of distributors in Latin America, MCS provides cable connections, cable repair and cable handling solutions to clients worldwide.

Contact: John Parkes, President & CEO Email: [email protected] H. Parkes, Managing Director Address: 7731-16th Street Edmonton, Alberta, T6P 1M1, Canada Phone: 1-780-439-1113 Toll Free: 1-800-663-2889 Fax: 1-780-439-4443 Email: [email protected] Website: www.minecableservices.ca

lmine Cable serviCes Corporation

• CableConnectionSystems

• CableRepairEquipment, materials and training

• CableReelers

• CableHandlingand SafetyEquipment

• MiningCable,2kV-25kV


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesElectric Power Equipment

Arkbro Industries is a manufacturer and supplier of mining equipment for in raise mining, to raise from horizontal drifts and tunnels to inclined and vertical shafts. Arkbro’s proprietary products are Raise Climbers ABI-5E and ABI-5EE. An electric-drive raise climber offers the advantage of faster traveling speeds. Arkbro Industries has designed and manufactured the necessary equipment for new mining methods and believes the endurance, performance, technical and safety

features of its raise climbers surpass all existing machines in the market.

larkbro industries See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, Middle East and North Africa, North America and Sub-Saharan Africa.

Contact:Mohammed Alwazani Address: Suite 1, 889 Pantera Drive Mississauga, Ontario, L4W 2R9, CanadaPhone: 1-905-602-9291, ext. Fax: 1-905-602-9296Email: [email protected] Website: www.arkbro.com

Patton & Cooke has been designing and manufacturing high-voltage equipment for mining and utility industries for more than 50 years. The P&C mining product line features trailing cable couplers, splitter and junction boxes, ground-wire monitoring relays, cable assemblies, and cable handling accessories. The dependable trailing cable-coupler line is available as a fully customizable product or in standard configurations such as American Standard, Navy Standard, and IEC/ISO Standard for

Shore Power applications. Patton & Cooke is recognized as an industry leader in electrical product innovations and the development of design and manufacturing standards. Local product support is available worldwide through an extensive distribution network, and the highly experienced staff of Patton & Cooke ensure the shortest lead times in the industry. From 480 volts to 25,000 volts, anywhere in the world, Patton & Cooke will help you make the connection.

Contact: Dale RomankoBusiness Development Manager Address: Suite 100 , 7795 128th Street Surrey, British Columbia V3W 4E6, Canada Phone: 1-604-591-5374 Toll Free: 1-866-591-5374 Fax: 1-604-591-3505 Email: [email protected] Website: www.pattonandcooke.com

ECS Electrical Cable Supply Ltd. (ECS), established in 1984, is the largest independently owned distributor of wire and cable products and solutions in Canada with a focus on the specialty markets. Offering a diverse product portfolio, technical application solutions and value-added services, ECS attributes its success to understanding the unique needs of its customers. ECS is proud to serve the Canadian market through its coast-to-coast locations and global markets through its hub in the Dubai Free Zone. ECS offers diverse product selection such as aluminum and copper building wire, electronic wire,

marine and oil rig cable, and specialty cable. Seasoned ECS staff has an average tenure of eight years and, along with its wealth of industry experience, has built long-standing client relationships based on personalized service and expert product knowledge.

Regional area warehouses are centrally situated to local client base and are on major service routes to facilitate rapid and efficient supply of cables with required cut lengths, reel configurations and identifications.

Contact:Deborah Wakeham Address: 3135-6900 Graybar Road Richmond, British Columbia V6W 0A5, Canada Phone: 1-604-206-9913 Fax: 1-604-207-1515 Email: [email protected] Website: www.ecswire.com

leCs eleCtriCal Cable supply ltd.

ECS ELECTRICAL CABLE SUPPLY LTD. is proud to be named one of Canada’s best

managed companies for the 2011 and 2012 years.

lpatton & Cooke Co.



ledC mining ltd.

Electric Power Equipment

Since 1964, Staticon Ltd. has designed and manufactured ‘fail-safe’ regulated battery chargers and float charge rectifiers that meet the critical and harsh applications of the mining industry. Staticon has more than 70,000 advanced, durable and field-serviceable motive battery chargers in service, charging all brands of batteries with fail-safe IUa, IUI, IUoU regulation. The heavy-duty Auto 2001 Mine Vehicle Charger featuring drip-proof, low-profile construction is available in ratings up to 168 cells (336 VDC) and

1500 AH. The quick-charge 48-cell LT Opportunity Chargers are rated up to 40A/100AH and can save you installation, interwiring, floor space, and battery-operating and maintenance costs. Other products include float charge rectifiers (24V to 240V, up to 1200 A); DC traction rectifiers for trolleys, cranes and elevators (up to 250 KVA); AC line voltage regulator-conditioners (up to 300 KVA); and ‘no break’ AC UPS, online standby and parallel redundant (up to 300 KVA). All products are made in Canada and meet

the standards of the International Underwriting Association and Canadian Standards Association.

Contact:Don Newman Address: Unit 5 390 Tapscott Road, Scarborough, Ontario M1B 2Y9, Canada Phone: 1-416-291-3723 Cell: 1-416-318-7810 Fax: 1-416-291-3871 Email: [email protected] Website: www.staticon.ca

lstatiCon ltd.

Unit Electrical Engineering Ltd. supplies completely engineered customizable, electrical systems to mines all over the globe. From substations, e-houses, trailing cable couplers, laboratories and pit dewatering feeders, to power analysis, protection studies and on-site service, UEE offers the complete electrical mining solution. UEE medium- and high-voltage quick-connect fittings enable safe, reliable and configurable supply feeds to shovels, drilling rigs, and other open-pit and underground

mining machines. UEE’s CSA-certified low-voltage couplers are perfect for motors, fans, pumps, and other small loads. For intricate, one-of-a-kind projects, UEE maintains a design and manufacturing team of more than 100 skilled engineers, technologists, technicians and trades personnel to meet the exacting demands of mining clients. UEE’s engineers provide custom design of complete electrical packages, while its field service personnel provide site testing and commissioning. You can

count on UEE’s international sales representatives to provide simplified equipment procurement for your complete electrical mining solutions.

Contact: Mark Burleigh, President Address: 1406 Maple Street Okanagan Falls, British ColumbiaV0H 1R2, CanadaPhone: 1-250-497-5254Fax: 1-250-497-6061Email: [email protected] Website: www.uee.com

lunit eleCtriCal engineering ltd.

Engineering Contractors

EDC Mining Ltd. (Engineering, Design and Construction) provides cutting-edge engineering and support services for mines around the globe. Specializing in shaft sinking and utilizing the latest software, EDC provides complete engineering services for whatever your needs may require. Beyond current techniques, EDC is also heavily involved in the development of two entirely new mining methods: 1) Double Post Mining, which will revolutionize the mining of applicable ore bodies, and

2) Narrow Vein Alimak Mining, in which EDC will assist in its development. EDC can provide the experienced supervision required to ensure your projects unfold as planned while offering complete contracting services through its partner Obra Mineras y Tiros Del Centro of Aguascalientes, Mexico. With offices in Toronto, Canada, and Aguascalientes, Mexico, EDC is well-positioned to provide the engineering you need, while ensuring your project is completed on time and on budget.

Contact: Mike Arriagada VP of Mining Address: Suite 903 141 Adelaide Street West Toronto, Ontario, M5H 3L5, Canada Phone: 1-416-368-4448 Fax: 1-416-203-1254 Email: [email protected] Website: www.edcmining.com




An environmental worker downloads information from a weather station at Detour Gold’s Detour Lake Mine, Northeastern Ontario, Canada.

Environmental Equipment & Services

Canada North Environmental Services (CanNorth) provides a full range of environmental services and is 100% owned by the Lac La Ronge Indian Band, Saskatchewan’s largest band. They offer high-quality, cost-effective environmental services with a focus on mining developments. Since 1981 CanNorth has completed more than 1,000 projects for resource developments and their clients include some of the largest Canadian and international mining companies. CanNorth offers the technical skills and knowledge to deliver solutions for managing environmental risk in ways that benefit their clients, satisfy regulatory requirements, and support local communities through

employment, training, and economic benefits. Projects are undertaken using defensible environmental study designs and state-of-the-art technology for analyses, evaluation, and problem-solving while emphasizing local Aboriginal (indigenous) participation. CanNorth also provides specialty services to facilitate communication and relationship building between Aboriginal people, the mining sector,

local communities, and government. CanNorth is ISO 9001:2008 (quality management), ISO 14001:2004 (environmental stewardship and management) and OHSAS 18001: 2007 (occupational health and safety) certified. In addition, they are also registered with ISNetworld.

Contact: Peter Vanriel, M.Sc., P.Biol. General Manager Address: 211 Wheeler Street Saskatoon, Saskatchewan S7P 0A4, Canada Phone: 1-306-652-4432 Fax: 1-306-652-4431 Email: [email protected] Website: www.cannorth.com

lCanada nortH environmental serviCes (CannortH)


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesEnvironmental Equipment & Services

lbiodisk CorporationSewage Treatment Plant Biodisk provides reliable and cost-effective

packaged wastewater treatment plants for mining camps, construction camps, small communities and other remote areas. Biodisk specializes in the design, manufacture, installation and operation of wastewater treatment units though the use of rotating biological contractors (RBCs). More than 2,000 treatment facilities have been installed in Canada and around the world. Shop-assembled and containerized, the Big John and Little John units are “turnkey” sewage treatment plants that require little power consumption, make a small footprint and need less maintenance than other portable solutions. Moreover, Biodisk specializes in solving global commercial and industrial water-quality issues from simple water softeners to a complete, complex high-purity system. This unique approach gives Biodisk the flexibility to custom design systems with standard components that meet a wide range of user water-treatment needs and space requirements.

Contact:Nancy Liao, Marketing ManagerAddress: 426 Royal York Road Toronto, Ontario, M8Y 2R9, Canada Phone: 1-416-503-4100 Fax: 1-416-503-4101 Email: [email protected] Website: www.biodisk.ca

Potable Water Treatment Plant

lCypHer environmental ltd. Cypher Environmental Ltd. has three environmentally friendly, cost-effective products that can be utilized on any mine site. EarthZyme is a non-toxic soil stabilizer used on clay-based soils that reduces road-maintenance costs due to the increased and lasting compaction and strength values that result from the product’s application. Increased densities are produced after the product’s application, which means higher CBR values, higher load-bearing capabilities and reduced permeability, allowing haul roads to be used even during wet weather. Dust Stop is a 100% environmentally friendly dust suppressant that

effectively eliminates unwanted fugitive dust from haul roads. Dust Stop comes in powder form, works on any soil type and is equally effective on stockpiles as it is on haul roads. UltraZyme is a blend of environmentally friendly cultures specifically designed to remediate organic wastes and provide odor control in a variety of water and wastewater treatment-related applications.

Contact:Shawn JamesDirector of EngineeringAddress: 2nd Floor1149 St. Matthews Avenue Winnipeg, ManitobaR3G 0J8, CanadaPhone: 1-204-489-1214Fax: 1-204-489-7372Website 1: www.cypherenvironmental.com Email: [email protected] Website 2: www.cypherltd.com Website 3: www.duststop.ca



WaterProviding turnkey solutions for camp potable water systems. Whether it be from seawater desalination or surface water treatment systems, BluMetric can supply turnkey, modular, transportable systems for your camp of any size.

WastewaterDesign build, turnkey solutions for many of today’s mining challenges: Camp wastewater, Acid Mine Drainage and Arsenic reduction.

Professional ServicesProviding environmental earth sciences and engineering solutions, including permitting and approvals, environmental site assessments and remediation, water management, industrial hygiene, and occupational health and safety to industry and government clients worldwide.

Delivering sustainable solutions to complex mining environmental issues in Canada and abroad.

www.blumetric.ca [email protected]

+= SeprotechWater. Pure and Simple

Contact:Gary Black, Sales Manager 3108 Carp Road, PO Box 430Ottawa, Ontario K0A 1L0Phone: 613-839-3053Email: [email protected]

BlumetricSerpotech.indd 1 9/16/13 2:47 PM



Hazeland Manufacturing Inc. is a leading Canadian manufacturer of hydro-excavation, pressure-cleaning and vacuum equipment for mining support services. Hazeland takes pride in manufacturing quality, cost-

lHazeland manuFaCturing inC.

effective equipment solutions. The HYDROSPADE product line ranges from small, compact trailers to large trucks. Hazeland provides standard and custom-tailored units to provide multiple use as well as individual

requirements. These units are used in hydro-excavation, visible-locating, spill-cleanup, water-blasting, pressure-washing, debris-vacuuming and sewage-disposal services. With access to a wide range of vacuum blowers and water-pressure pumps along with related components from around the world, Hazeland provides parts and service support as well as refurbishing/rebuild and fabricating services to keep your operations on track. If it can be done, Hazeland will do it.


lsimpson environmental Corp.

Simpson Environmental Corporation is a systems integrator in the environmental field providing pre-engineered, packaged, potable water and wastewater/water reuse solutions to the global mining industry. The company’s solutions (SIMPODs) embody customized “treatment trains” for each client requirement, which can include one or more of the following technologies; dewatering, filtration, UF/RO and advanced oxidation processes. SIMPOD non-biological solutions are characterized by their small size, light weight, portability, reliability and price competitiveness. SIMPODs are robust, scalable, require low maintenance, low-energy support from the grid, solar power or on-site generation and are transportable to remote locations.

Simpson provides a full range of services to support its engineered solutions: design and construction, facility management, engineering, laboratory, and mobile pilot testing. Its solutions involve both proprietary patented technology as well as “best of breed” OEM’d water treatment technologies selected to provide clients with the best alternatives available within the global environmental manufacturing sector.


Contact: James Simpson, Vice President Business DevelopmentAddress: Unit A-10 5035 North Service Road Burlington, OntarioL7L 5V2, CanadaPhone: 1-905-332-7669Fax: 1-905-332-7502Email: [email protected] Website: www.senvc.com



IC Controls manufactures quality water-analysis equipment that is used to actively manage risk in mines, mills, metallurgical refineries and wastewater applications producing advanced operating efficiencies as well as improved safety. The Model 642 pH sensor is a proven product and the company’s bestseller. Customers find it easy to install and maintain, and it exceeds their expectations for longevity. IC Controls products are known for performance in floatation, conditioners, gutters, sluiceways, effluent streams and ponds. With a strong customer base in Canada and a growing reputation throughout the world, its product line has evolved to

offer analyzers and configurable sensors in the areas of pH, conductivity, ORP, dissolved oxygen, chlorine, and boiler analysis. As demand for the world’s mineral

resources grows, there’s increasing pressure on the critical habitats vital to food production and freshwater availability. IC Controls provides the necessary water-analysis equipment to maximize the positive effects of mining operations in response to these issues.

Contact:Rosalie FitzpatrickAddress: 29 Centennial Road Orangeville, Ontario L9W 1R1, Canada Phone: 1-519-941-8161 Fax: 1-519-941-8164 Email: [email protected] Website: www.iccontrols.com

liC Controls

SEI Industries Ltd. provides turnkey fuel, water and chemical storage systems for remote sites. As a world leader in the manufacture of collapsible fuel tank “bladders” and secondary containment, SEI offers a trio of Arctic, Desert and Jungle King tanks that are designed specifically for harsh climates anywhere in the world. The Arctic King tank also meets Environment Canada regulations for fuel storage. SEI’s Remote Site division provides custom fuel transferring, metering and filtration equipment, while SEI’s Environmental product group offers berms and spill guards of all sizes for secondary

containment as well as a range of products for hazardous materials management. Its facility in Delta, British Columbia, is certified to ISO 9001:2008 and serves corporate, military and government customers worldwide. Talk to one of SEI’s highly experienced product consultants for a custom solution to fit your liquid logistics and environmental needs.


Contact:Rob FergusonSales Manager Paul ReichardDivisional ManagerAddress: 7400 Wilson Avenue Delta, British ColumbiaV4G 1H3, CanadaPhone: 1-604-946-3131Fax: 1-604-940-9566Email: [email protected] Website: www.sei-ind.com

lsei industries ltd.

scam alertsVigilance is essential with any trade show offers. Be sure to read the fine print before signing solicitations from sources that you do not know. If you have information or expect a scam, please pass it along to CAMESE so we can warn other member firms.



lsolmax international inC.

Solmax is positioned among the top leaders in the manufacturing of PE geomembranes and offers both containment and fluid transportation solutions including HDPE pipes, valves, fittings and accessories. Manufactured in Canada, Malaysia and Chile, its products are sold worldwide and are used by the biggest names in mining, petroleum, waste management, water and civil engineering sectors. Solmax products are vital in protecting soils from

contamination in critical locations like the landfills of the world’s most populated cities and the mines operating in environmentally fragile ecosystems. Its vision: Covering the World. Protecting the Earth.

Contact:Jean-Louis Vangeluwe Vice PresidentGlobal Business DevelopmentAddress: 2801 Marie-Victorin Blvd. Varennes, Québec J3X 1P7, CanadaPhone: 1-450-929-1234, ext. 222Toll Free North America: 1-800-571-3904 Fax: 1-450-929-1277 Email: [email protected]: www.solmax.com

GENEQ Inc. is a Canadian supplier of laboratory equipment. GENEQ’s product line includes sample preparation products like crushers, grinders, pulverizers and mills as well as particle-size analysis tools such as sieve shakers, sieves and sample dividers. GENEQ also has a Geomatics department that sells its SXBlue GPS/GNSS high accuracy GIS receiver as well as an

Environmental department that sells water, air and soil instruments for sampling, measuring and monitoring. All products can be seen in GENEQ’s website catalog at www.geneq.com. GENEQ sells and ships worldwide!

Contact: René Parisé VP Sales and Marketing Address: 10700 rue Secant Montreal, Quebec H1J 1S5, Canada Phone: 1-514-354-2511 Toll Free: 1-800-463-4363 Fax: 1-514-354-6948 Email: [email protected] Website: www.geneq.com

lgeneq inC.

S c i e n t i f i c I n s t r u m e n t s

STT Stanco designs, manufactures and installs custom, bulk chemical storage and handling systems for mining applications. It specializes in lime-slaking systems for pH control applications, mill-water treatment, wastewater treatment and mine tailings. SST Stanco will select the best equipment for the application and has a complete range of slaking equipment including the Metso Minerals VertiMill® slaker and ZMI Portec lime slaker. STT Stanco’s strength is based on world-class engineering support with Representation for installations in major mining districts in Canada, the United States, Mexico, South

America, the Middle East and Asia. STT Stanco offers life cycle support to its customers through preventive maintenance service and parts supply. STT Stanco also helps customers operate their system safely and at optimum performance by carrying out audits of mechanical equipment. In

addition, its system optimization service helps customers reduce their lime consumption by improving process and operation parameters. Call STT Stanco to schedule a site visit or go to its website for more information.

Contact: H. Fraser Bringeland Address: 8485 Parkhill Drive Milton, Ontario L9T 5E9, Canada Phone: 1-604-248-8063Mobile: 1-778-384-2838 Toll Free: 1-800-730-5859 Fax: 1-905-693-9432 Email: [email protected] Website: www.sttstanco.com

lstt stanCo




Fabrication work is repaired in the maintenance shops for Goldcorp’s Porcupine Gold Mine in Timmins, Ontario, Canada.

Equipment Maintenance & Repair

Normac Adhesive Products Inc. is a Canadian manufacturer of abrasion- and corrosion-resistant coatings based on sprayable polyurethanes, sprayable polyureas, room temperature castable polyurethanes, grouts/putties and adhesive/primers. More than 25 years of continuous research and development has enabled Normac to develop and manufacture unique products that have proven themselves worldwide to not only exhibit outstanding wear and tear qualities and longevity, but to also be user friendly and safe to work with. The company manufactures its own primer/adhesive systems for bonding all of its products to a wide variety of substrates. Normac is also well

known for its 900R and 600R room temperature curing adhesives for rubber/urethane, and rubber/urethane to steel requirements. Coupled with a strong commitment to engineered solutions and service, Normac can provide that little extra to ensure complete customer satisfaction.

Contact: George MacGregor, President Email: [email protected]: 1350 Heine Court Burlington, Ontario L7L 6M4, Canada Phone: 1-905-332-6455 Fax: 1-905-332-6880 Email: [email protected] Website: www.normacadhesives.com

lnormaC adHesive produCts inC.


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesEquipment Maintenance & Repair

A.L. Sims & Son Ltd., the flagship of the Sims Group of companies, provides sales, rentals and complete mechanical and welding repairs to all types of mining and construction equipment. A.L. Sims’ experienced staff can also remanufacture your equipment to comply with the latest industry standards. Roktek Services Inc., a Sims Group company, is a mining and civil tunnel specialist with a proven track record in all aspects of

surface and underground excavation and construction. Skeena Power Systems Ltd., another member of the Sims group, specializes in complete power systems from power line and substation construction, to underground electrical, controls and wiring, and communication systems. Whatever your mining requirements, the Sims Group can take them from conception to completion. Call A.L. Sims today to discuss your needs.

Contact: Len Sims Address: 7961 Otway Road Prince George, British ColumbiaV2M 7B4, CanadaPhone: 1-250-564-9011Fax: 1-250-561-1538Email: [email protected] 1: www.alsims.caWebsite 2: www.roktekservices.ca

la.l. sims & son ltd.

Global Inspections provides leading technology for ring gear inspections in the mining and cement sector. Tom Shumka, President of Global Inspections, wrote the ASTM Standard E2905 for Mill Ring Gear Cleaning and Inspection. The Gear-Pro™ method detects all gear and pinion tooth surface discontinuities that are larger than 0.015 of an inch. This practice addresses the need to electronically detect surface-breaking discontinuities and can accurately size surface-breaking cracks on mill

ring gear and pinion teeth in a faster, more effective way than other methods. Cleaning has never been easier. For example, a 10m ring gear can be cleaned in less than an hour and there is no need to wipe down gear flanks after cleaning which reduces person-hours. This method is cleaner, faster and documentable. It covers a larger area in less inspection time than any other traditional, non-destructive testing method that is available for ring gear drives.

Contact: Tom Shumka President Address: 108-1950 Durnin Road Kelowna, British Columbia V1X 7W6, Canada Phone: 1-250-762-5525 Fax: 1-604-648-8645 Email: [email protected] Website: www.global-ndt.ca

lglobalinSpECtionS-ndt,inC.

Moventas Ltd. is a leading global supplier of industrial gears that designs, develops and manufactures modular gear units and application-specific customized drive solutions for heavy-duty industrial use. Serving the mining industry since 1945-first under the brand names Metso Drives, Valmet, Sauerwald and Santasalo and now as Moventas-the company has built a solid reputation for achieving high-performance standards. The

company’s gearboxes have proven to be both durable and reliable with more than 600 gearbox installations in grinding mills alone. Moventas’ standard product range includes helical, bevel-helical and planetary-drive solutions for horizontal and vertical grinding mill applications with all the required accessories. Multi-segmented ring gears and pinion sets for grinding mills compliment the companies offering.

lmoventas ltd.

Contact: Ontario Jordon Barker, General Manager Address: 1615 Bishop Street North Cambridge, Ontario, N1R 8C8, Canada Phone: 1-519-621-6390 Fax: 1-519-621-7660 Email: [email protected] Website: www.moventas.comQuébecDan Godbout, Technical Sales ManagerAddress: 750 Blvd. Pierre-Bertrand S.Québec, Québec, GLM 3L2, CanadaEmail: [email protected]


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesEquipment Maintenance & Repair

Rector Machine Works Ltd. has served Canada and the U.S. for more than 80 years with its quality workmanship and excellent service within the mining, steel, forestry and power-generation industries. Rector’s five divisions cover many services including machining (CNC and manual), welding and fabrication (light, medium, heavy and structural), driveline and balance (manufacture and repair of driveshafts for automotive), offroad (mining), industrial (mills and factories), millwriting (disassemble, rebuild, re-install and commission of any industrial equipment), and hydraulics (manufactures cylinders and rebuilds cylinders, pumps and motors). Rector’s decades of experience give it a competitive advantage in mechanical

manufacturing, installation and repairs. Located in Sault Ste. Marie, Rector Machine Works provides an excellent shipping advantage to and from the United States and across Canada. Rector Machine Works

proudly received the 2010 award for Company of The Year by Northern Ontario Business. With its recent $2 million expansion, Rector Machine Works continues to grow!

Contact: Dave RectorBusiness Development DirectorEmail: [email protected] Herv RectorPresident Email: [email protected] Mark Rector, Operations ManagerEmail: [email protected] Address: 190 Sackville Road Sault Ste. Marie, Ontario P6B 4T6, Canada Phone: 1-705-256-6221 Cell: 1-705-542-9489 Fax: 1-705-256-6503 Website: www.rectormachineworks.com

lreCtor maCHine works ltd.

Valley Blades Limited, ISO 9001:2008 certified, manufactures replacement wearing edges for earth and snow removal equipment including bulldozers, road graders, loaders, scrapers, excavators, and snow plows. These wearing edges are manufactured using computer-assisted technology to rigid specifications that meet or exceed those set by the original equipment manufacturer. Since it began in the early 1960s, Valley Blades Limited has grown into a world supplier of

replacement wearing edges and has built a strong dealer network that supplies competitively priced, quality products and reliable service backed by an extensive inventory. Valley Blades Limited manufactures replacement wearing edges for Caterpillar, Komatsu, Deere, Case, Terex, Volvo and more, and has manufacturing facilities located in Waterloo, Ontario, and Edmonton, Alberta, to serve the mining industry nationwide and customers around the world.

Contact:Randy Sauer, Sales Manager Email: [email protected] Address: 435 Phillip Street Waterloo, Ontario N2J 3Z9, Canada Phone: 1-519-885-5500 Toll Free: 1-800-461-1824 Fax: 1-519-746-2780 Email: [email protected] Website: www.valleyblades.com

lvalley blades limited

www.camese.orgFeaturinginformationaboutmorethan300Canadianminingsuppliers.


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesFinance Consultants & Services

Export Development Canada (EDC) is Canada’s official export credit agency, offering innovative solutions to help Canadian exporters and investors expand their international business. EDC has participated in international mining projects worth more than $7 billion over the past five years. EDC’s country expertise and knowledge of political and commercial risks has enabled it to be a major player in complex mining transactions such as CODELCO (Chile), Industrias Penoles S.A.B. de C.V. (Mexico) and Vale (Brazil). EDC

can provide insurance coverage to ensure you get paid; offer financing to your buyers; protect your investments against political risks; and, work with your bank to provide you with additional cash flow. If you’d like to learn more, please visit www.edc.ca.

Contact: Andrea Gaunt Email: [email protected]: 150 Slater Street Ottawa, OntarioK1A 1K3, CanadaPhone: 1-613-598-3073Toll Free: 1-800-850-9626Fax: 1-613-598-3834Email: [email protected] Website: www.edc.ca

lexport development Canada (edC)

Mercantile Exchange is one of the world’s most trusted and reliable specialists in the Global Foreign Currency Exchange markets. Mercantile strives to offer consistently better currency rates than banks by using technology-based resources to seamlessly deliver corporate payments in all major currencies. Whether you’re looking to reduce exposure to currency volatility or manage costs through hedging with Forward Contracts, Spot Deals or Standing Orders, Mercantile’s FX currency trading team

can accommodate your needs once an international payment solution is determined. A single point of contact provides the personalized and customized service you need. For instance, Mercantile’s currency trader will inform you of any movement in the market based on your currency requirements. When you set up an account with Mercantile, it will buy/sell the funds on your behalf and settle the trade through one of the following methods: Wire-for-Wire, EFT, Direct Debit, or Cheques.

Contact: Patrick O’Neill National Sales ManagerAddress: 14th Floor 25 King Street West Toronto, Ontario M5L 1E8, Canada Phone: 1-416-368-3680 Fax: 1-416-368-8511 Email: [email protected] Website: www.mercfx.com

lmerCantile exCHange


Given the growth projections for China, India and elsewhere, and assuming a positive investment environment, the Canadian mining industry should enjoy strong economic prospects in the coming decades. According to Mike Carney, Canada’s former governor of the Bank of Canada, the Chinese slowdown in investment does not appear to be long-term.



Analytical Laboratories and Supplies Analytical Laboratories and SuppliesFuel Transportation & Storage Equipment

Greatario Engineered Storage Systems prides itself as the market leader for liquid storage tanks and covers in eastern Canada. Aligned with CST Storage and CST Covers, the global leader in storage tanks and covers, Greatario is able to offer a complete line of advanced storage-tank solutions and tank-cover options: the right tank for the right application, with the right coating. Aquastore glass-fused-to-steel tanks, and Hydrotec epoxy-coated tanks and CST/Temcor aluminum domes

and covers are products Greatario offers. Greatario can provide turnkey operations that are efficient and cost-effective. Greatario’s team of professionals is prepared to partner with its customers from design to completion to ensure exceptional quality, and timely construction, within budget. Since 1986, Greatario’s extensive knowledge and technical expertise have allowed it to design build more than 400 tanks and 100 dome covers throughout eastern Canada.

Contact: Pat Logan Address: P.O. Box 399 Innerkip, Ontario N0J 1M0, Canada Phone: 1-519-469-8169 Fax: 1-519-469-8157 Email: [email protected]

lgreatario engineered storage systems

lsei industries ltd.

SEI Industries Ltd. provides turnkey fuel, water and chemical storage systems for remote sites. As a world leader in the manufacture of collapsible fuel tank “bladders” and secondary containment, SEI offers a trio of Arctic, Desert and Jungle King tanks that are designed specifically for harsh climates anywhere in the world. The Arctic King tank also meets Environment Canada regulations for fuel storage. SEI’s Remote Site division provides custom fuel transferring, metering and filtration equipment, while SEI’s Environmental product group offers berms and spill guards of all sizes for secondary

containment as well as a range of products for hazardous materials management. Its facility in Delta, British Columbia, is certified to ISO 9001:2008 and serves corporate, military and government customers worldwide. Talk to one of SEI’s highly experienced product consultants for a custom solution to fit your liquid logistics and environmental needs.


Contact:Rob FergusonSales Manager Paul ReichardDivisional ManagerAddress: 7400 Wilson Avenue Delta, British ColumbiaV4G 1H3, CanadaPhone: 1-604-946-3131Fax: 1-604-940-9566Email: [email protected] Website: www.sei-ind.com


Nearly 3,200 companies provide the goods and services the mining industry needs to function, thus broadening the industry’s economic reach even further. Most of these suppliers are located in Ontario and British Columbia, followed by Alberta, Québec, Saskatchewan and Manitoba.



Analytical Laboratories and Supplies Analytical Laboratories and SuppliesGeophysical Instrumentation

Based in Toronto, Canada, AGCOS (Advanced Geophysical Operations and Services Inc.) specializes in the innovative design and manufacture of reliable, multifunction geophysical EM equipment, instruments, sensors, software and accessories for onshore and offshore geophysical surveys as well as a wide range of exploration, engineering and scientific applications. Know-how technologies include: precision field tripods for induction magnetic sensor installation for any terrain, climate or weather conditions; shallows marine EM technology for

coastal shelf and transition zones; and also environmentally-friendly Magnetovariational Profiling (MVP) technique for mining exploration. AGCOS is the only company in the world that supplies turnkey,

multifunction, high precision EM data acquisition systems for all-known ground EM geophysical techniques and marine EM surveys.

Contact: Igor IngerovPresidentAddress: 162 Oakdale Road North York, Ontario M3N 2S5, Canada Phone: 1-416-747-8800 Fax: 1-416-747-5761 Email: [email protected] Website: www.agcos.ca

lagCos inC.

lCrone geopHysiCs & exploration ltd.Crone Geophysics & Exploration Ltd. designs and manufactures geophysical equipment, including the PULSE EM (or PEM) system – the leading time-domain electromagnetic (TDEM) system for surface and borehole mineral exploration. Crone also provides contract surveys and consulting (see Geophysical Surveys section). Since 1962, Crone has pioneered instrument design and method development. They developed the first commercial TDEM system in the 1970s, and continued to lead the industry with deep borehole logging and fully digital receivers. In 1991,

they were the first to provide three-component TDEM measurements down boreholes. During the 1990s, a step-response data transformation was introduced, using unique features of Crone’s PEM system. Soon after, SQUID and fluxgate magnetometers were first used with Pulse EM and are

now used routinely for deep surface and borehole exploration and in sensor arrays with full-waveform recording. Flexibility and state-of-the-art technology make Pulse EM the ultimate TDEM system.

Contact:Bill Ravenhurst Address: 2135 Meadowpine Blvd. Mississauga, Ontario, L5N 6L5, Canada Phone: 1-905-814-0100 Fax: 1-905-814-8617 Email: [email protected] Website: www.cronegeophysics.com

IFG Corporation is Canadian-owned and has been designing and manufacturing borehole sensors and instrumentation for geophysics since 1979. The sensors have been applied in the field of mining exploration, grade control, environmental geophysics, ground water studies and deep-sea exploration. IFG Corporation is a full-service company that offers sales and leasing along with complete research and development service. This service can accommodate new requirements or

integrate systems and probes from other manufacturers. Specification sheets, technical notes, advice and prices are available at your request. SENSING TECHNOLOGIES: Magnetic Orientation, Gyro orientation, Tilt meter, 3-Component Magnetic, Magnetic Susceptibility, Induced

Polarization, Inductive/Capacitive Conductivity, Spectral Gamma Density, Caliper and Gamma (KUT) Galvanic Resistivity Borehole winches.

Contact: Detlef Blohm, President Address: Unit 2, 26 Bramsteele Road Brampton, Ontario, L6W 1B3, Canada Phone: 1-905-451-5228 Fax: 1-905-459-2877 Email: [email protected] Website: www.ifgcorp.com

liFg Corporation


Analytical Laboratories and Supplies Analytical Laboratories and SuppliesGeophysical Instrumentation

GEM is a world leader in manufacturing the most advanced magnetometers and gradiometers that are accurate, reliable, and easy-to-use. They are used in approximately 140 countries worldwide for mineral and oil exploration, archaeology applications, volcanology, earthquake research and military application. Ground, airborne (fixed-wing and helicopter) and base-station units are available with the highest data quality and specifications in the market. Products include Potassium Vapour, Overhauser, Proton (Models GSMP-35, GSM-19 and GSM-19T respectively), dldD for vector measurement, VLF and AFMAG-EM instruments. All instruments feature built-in, high-

resolution GPS options for accurate positioning and reduced grid surveying costs. GEM backs its instruments with an industry-leading two-year warranty along with knowledgeable technical and sales support. The company’s reputation is based on more than 30 years of continuous research and development, resulting in GEM’s technological innovations in magnetics and electromagnetics.

Contact: Shannon Kadoski Marketing Manager Email: [email protected] Address: 135 Spy Court Markham, Ontario L3R 5H6, Canada Phone: 1-905-752-2202 Fax: 1-905-752-2205 Email: [email protected] Website: www.gemsys.ca

lgem systems inC.

Geonics Limited is the world leader in the research and development of electromagnetic (EM) geophysical instrumentation. Incorporated in 1962, Geonics has an established history in the production of reliable instrumentation for the resource industries. Using its more than 40 years of experience in the design of time-domain electromagnetic (TDEM) systems, Geonics has developed the versatile PROTEM TDEM System. The PROTEM Receiver is combined with any of the five available transmitters to cover a full range of applications, from shallow surface and in-mine investigations to deep, three-component surface and downhole exploration for mineral and

geothermal targets. Recently introduced PROTEM CM and G-TEM consoles offer conveniences in portability and functionality. Applications in resource exploration are further supported by surface and downhole fluxgate magnetometer

sensors. Industry-standard Ground Conductivity Meters address requirements for near-surface site characterization; common applications include the mapping of hydrogeologic structure, brine contamination, acid rock drainage and abandoned mine works.

Contact: Simon BoniwellManager, Marketing & Sales Email: [email protected] Address: 8-1745 Meyerside Drive Mississauga, Ontario L5T 1C6, Canada Phone: 1-905-670-9580 Fax: 1-905-670-9204 Email: [email protected] Website: www.geonics.com

lgeoniCs limited

ifyoudon’tbrag,whowillknow?CAMESE posts your press releases in Member News online.


Geophysical Instrumentation

Since 1976, Instrumentation GDD Inc. has manufactured, sold, rented and developed innovative and reliable instruments for geophysics and mining. GDD is well-known for its excellent, worldwide customer service. For induced polarization or resistivity surveys, use the new 32-channel IP Receiver with Lithium-Ion batteries and the proven 1800W-3600W-5000W/2400V IP Transmitter (up to 10000W/4800V). The new GDD Current Indicator has been developed to enhance field operators’ safety while they manipulate wires and electrodes. At the same time, it provides real current for more accurate resistivity measurement. Try GDD’s new

portable, innovative tool – the Sample Core IP Tester (SCIP) – to measure the electrical properties (IP/Resistivity) of core samples. Use the handheld MPP probe to instantaneously record the conductivity and magnetic susceptibility of your drill cores. Sample inexpensively ground EM conductors using the Beep Mat with GPS to detect and localize sulphides, gossans or floats down to 3 meters below the surface. To increase grades in a mine, use the SSW-EM-Probe to log blast holes to outline the limits of ore before selectively loading explosives. The latest addition, the NordicEM24, a 24-bits/8-channels

EM Receiver was announced after being tested successfully with the LT Squid. Check at www.gdd.ca or call for more details.

Contact: Pierre Gaucher, Eng., MBA President Email: [email protected] Address: Suite 200 860 boulevard de la Chaudière Québec, Québec G1X 4B7, Canada Phone: 1-418-877-4249 Toll Free: 1-877-977-4249 Fax: 1-418-877-4054 Email: [email protected] Website: www.gdd.ca

linstrumentation gdd inC.

Since 1975, Phoenix Geophysics Ltd. of Toronto has provided geophysical instrumentation and services to clients in 75 countries and has carried out surveys for most of the world’s largest mining companies. Phoenix specializes in magnetotellurics (MT), audiofrequency MT (AMT), controlled-source AMT (CSAMT), induced polarization (IP), and EM in time and frequency domain. These techniques identify subsurface anomalies that can signal the presence of base and precious metals and diamond-bearing kimberlites. High-sensitivity phase IP was instrumental in mapping the weak IP anomalies associated with the Hemlo gold

orebody in Ontario, Canada, in the 1980s. In 1992, a Phoenix surface MT survey detected a nickel-copper ore body at a depth of 1,750 m.,

triggering a wave of interest in MT as a deep-looking exploration technique. Recent Phoenix MT, AMT, and CSAMT surveys detected new kimberlites in Arkhangelsk, Russia, and western Africa. Recent surface AMT surveys in Canada mapped known kimberlites at depth.

Contact: Leo Fox, President Address: Unit 3 3781 Victoria Park Avenue Toronto, OntarioM1W 3K5, CanadaPhone: 1-416-491-7340Fax: 1-416-491-7378Email: [email protected] Website: www.phoenix-geophysics.com

lphoenix geophysiCs ltd.

you can source online. go to:

www.camese.org


Geophysical Surveys & Consulting

Crone Geophysics & Exploration Ltd. provides worldwide geophysical surveys and manufactures PULSE EM equipment – the leading time-domain electromagnetic (TDEM) system for surface and borehole mineral exploration (See Geophysical Instrumentation section). With a staff of experienced operators, geophysicists and manufacturing personnel, Crone delivers top-quality survey design, data collection, processing, and interpretation with an unmatched level of support from the people who have built the equipment. Crone’s crews are trained extensively to safely and efficiently collect high-quality data under difficult conditions, anywhere in the world. Since 1962, Crone has had a proud record of detecting and pin-pointing conductors at great distances from boreholes or from surface, and new tools such as SQUID and fluxgate sensors, sensor arrays, and higher

power have added to that success story. Significant cost savings in the exploration for base metals, gold, uranium, diamonds and other minerals can therefore be realized with Crone’s leading-edge geophysical instrumentation and services.

Contact: Bill Ravenhurst Address: 2135 Meadowpine Blvd.Mississauga, Ontario L5N 6L5, Canada Phone: 1-905-814-0100 Fax: 1-905-814-8617 Email: [email protected] Website: www.cronegeophysics.com

lCrone geophysiCs & exploration ltd.

Sander Geophysics Ltd. (SGL) provides worldwide airborne geophysical surveys for petroleum and mineral exploration, and geological and environmental mapping. Founded in 1956, SGL’s services include high-resolution airborne gravity, magnetic, electromagnetic, and radiometric surveys, using fixed-wing aircraft and helicopters. Sander Geophysics offers gravity surveys with AIRGrav, which was designed specifically for the unique characteristics of the airborne environment and is the highest resolution gravimeter available. Immediate data processing is part of SGL’s standard quality control procedure, and provides clients with rapid results for evaluation while a survey is in progress. Sander Geophysics also offers a full range of

data enhancement programs and integrated interpretation services by experienced geoscientists. SGL is a founding member of the International Airborne Geophysics Safety Association (IAGSA), and has developed and implemented a Safety Management System (SMS) and comprehensive Health, Safety and Environment (HSE) policies that govern all aspects of company operations.

Contact: Malcolm ArgyleAddress: 260 Hunt Club Road Ottawa, OntarioK1V 1C1, CanadaPhone: 1-613-521-9626Fax: 1-613-521-0215Email: [email protected] Website: www.sgl.com

lsander geophysiCs ltd. (sgl)


Geophysical Surveys & Consulting

lagCos inC. Based in Toronto, Canada, AGCOS (Advanced Geophysical Operations and Services Inc.) specializes in the innovative design and manufacture of reliable, multifunction geophysical EM equipment, instruments, sensors, software and accessories for onshore and offshore geophysical surveys as well as a wide range of exploration, engineering and scientific applications. Know-how technologies include: precision field tripods for induction magnetic sensor installation for any terrain, climate or weather conditions; shallows marine EM technology for coastal shelf and transition zones; and also environmentally-friendly

Magnetovariational Profiling (MVP) technique for mining exploration. AGCOS is the only company in the world that supplies turnkey, multifunction, high precision EM data acquisition systems for all-known ground EM geophysical techniques and marine EM surveys.

Contact: Igor IngerovPresidentAddress: 162 Oakdale Road North York, Ontario M3N 2S5, Canada Phone: 1-416-747-8800 Fax: 1-416-747-5761 Email: [email protected] Website: www.agcos.ca

Abitibi Geophysics provides the highest quality geophysical data acquisition, processing and interpretation services to help its clients find precious and base metals, diamonds, uranium as well as other mineral resources. Abitibi has earned an international reputation for developing innovative solutions. Abitibi offers

ground and borehole geophysical services worldwide: Time-Domain Electromagnetics featuring the new high sensitivity ARMIT sensor, measuring B-field and dB/dt simultaneously to depths of 1,000 m. IPower 3-D induced polarization/resistivity for best depth penetration through conductive overburden. Borehole IP radius of exploration increased to 500 m. Borehole Gravity uses the Scintrex Gravilog system to estimate mass of deposit and apparent density. Surface surveys conducted with CG-5 and DGPS. Magnetic and Gamma-Ray

Spectrometry. Abitibi’s mission is to help you find a mine through the intelligent application of geophysics. Strategic partnership enquiries are welcome.

Contact: Pierre Bérubé President Address: 1746 Chemin Sullivan Val d’Or, Québec J9P 7H1, Canada Phone: 1-819-874-8800 Fax: 1-819-874-8801 Email: [email protected] Website: www.ageophysics.com

labitibi geophysiCs inC.


According to the Mining Industry Human Resources Council, one out of two current industry workers must be replaced in the next decade. This need affects high-skill areas. For example, 65% of geoscientists will reach retirement age during the next decade. The human resources challenge is greater in mining than in other Sectors because the industry typically attracts fewer females, youth and minorities. Proportionally, Canada is the leading private sector employer of Aboriginal people. Approximately 1,200 Aboriginal communities are located within 200 kilometres of some 180 producing mines and more than 2,500 active exploration properties.



Ground Control Equipment & Supplies

lConmiCo inC. ConMico Inc. of Concord, Ontario, with more than 45 years of experience, has expertise that lies in the application of utilizing high-pressure water systems for mining applications with pressures up to 50,000 psi and up to 1,200 H.P. Applications for jet boring and hydrofracturing of hard rock are very successful. In particular, rock hydrofracturing makes the block-caving process very predictable as well as it increases production. ConMico can custom engineer a solution to fit many needs. Other products include durable, lightweight grouting and cement-injection plants for use in soil

consolidation, grout jetting to 10,000 psi, pile formation, tunnel forming and repairs, forming water curtains, back-filling, roof bolting and grouting of cracks in tunnels and mine shafts. For pump systems, ConMico manufactures high-speed colloidal mixers, double-drum mixers, agitators, as well as long lasting, well-designed packers, valves and certified high-pressure fittings. Wet and dry shot-crete systems and dependable concrete pumps are also available.

Contact:Stephen J. Miko Email: [email protected] Dastyar, Engineering ManagerEmail: [email protected]: Unit 11, 140 Bradwick Drive Concord, Ontario, L4K 1K8, CanadaPhone: 1-905-660-7262Fax: 1-905-660-1843Website: www.conmico.com

Ground support systems you can build on.

Mansour Mining Technologies Inc. (MMTI) is a market-leading manufacturer of integrated mining supply products including ground support, rock-drilling tools, mine ventilation and smelter, as well as refinery hardware. MMTI offers these integral products in order to keep mining operations safe, efficient and profitable. Innovation, quality and around-the-clock global service represent the core values that

encompass Mansour Mining Technologies Inc. With nearly 40 years in the mining industry, Mansour Mining Technologies Inc. understands that the key to success is to develop close working relationships with customers. MMTI builds these customer relationships from the ground down.


lmansour mining teChnologies inC.

lmultiurethanes Multiurethanes Grouting Professionals offer unique engineering services to troubleshoot challenging water inflow projects in underground mines. Typical problems resolved by their hands-on engineers include large-volume high-pressure water inflows and construction through broken and water-bearing ground conditions. Recent examples of projects successfully completed using Multiurethanes’ products, equipment and engineering services include shaft-sinking and mine-development projects

in Canada, Mexico, U.S.A., Peru, Indonesia and Finland. Multiurethanes’ expertise is in the application of specific grouting technologies involving chemical and cement grouts, specialized equipment and accessories as required in overcoming difficult underground mining conditions. Multiurethanes Grouting Professionals deliver on-site training and instruction of grouting fundamentals to provide your crew with water-control capabilities. For a summary of grouting services routinely provided to mining

clients, call the Multiurethanes Toll Free number on the right. You can rely on Multiurethanes every time.

Contact: Peter White, P.Eng. General ManagerAddress: 5245 Creekbank Road Mississauga, Ontario, L4W 1N3, CanadaPhone: 1-905-564-7650Toll Free: 1-800-663-6633Fax: 1-905-564-7998Email: [email protected] Website: www.multiurethanes.com


Hoisting Equipment & Accessories

Hepburn Engineering Inc. (HEI) designs and supplies complete mine hoisting systems with fully integrated electrical controls, digital drives, digital safety monitors, PLC-based operating systems and hoist management software for automated hoisting. The Hepburn Hoist Manager is the most advanced, comprehensive and user-friendly hoist-operating and management system available today. It incorporates advanced fault logging and diagnostics and can be configured to control hoists from a remote location. The new Hepburn Hoist Reporter software provides mine management with detailed, real-time production reporting, hoist status and searchable fault history using standard web browsers. Through Hepburn Hoist Care, Hepburn engineers can remotely access the hoist controllers and perform remote diagnostics to solve problems quickly. Hepburn electrical controls and Hoist Manager can be retrofitted to

lhepburn engineering inC.

Hepburn Hoist Manager Display

Control room for Hepburn Shaft Sinking Hoists and Winches

existing hoisting plants, as well as incorporated in new hoists, to improve automation, performance, productivity, safety and maintenance. See the Hepburn company profile under Hoisting Equipment.

See Country Interests Section for Asia-Pacific, Latin American and the Caribbean, North America, Sub-Saharan Africa and Worldwide.

Contact: John Hepburn, President Address: 73 Six Point Road Toronto, Ontario, M8Z 2X3, CanadaPhone: 1-416-638-4425Fax: 1-416-638-2070Email: [email protected] Website: www.hepeng.com

Horne Conveyance Safety Ltd. is a world leader in mine cage and skip chairing, and has extensive experience in impact energy absorption. The company’s Levelok® cage and skip chairing systems, continuously developed and tested for more than 30 years, overcome rope-stretch problems when hoisting heavy materials and ore in underground mines. The Levelok® system can be operated with steel and wooden shaft guides. It can also be used as an Emergency Fall Arrest System (E-FAS®) to provide safe deceleration in the event of an uncontrolled fall of a mine cage. Horne supplies Levelok® to mines in Canada, South Africa, the U.S.A., Australia and South America. Additionally, Horne supplies the Technogrid® system, a

well-engineered solution in a variety of applications, such as safely arresting mine cages in over-wind conditions in a head frame, or for counterweights on conveyor systems, impact absorption for railway rolling stock or potentially on roadway guardrails and other areas where sudden unexpected impact absorption needs to be applied to avoid serious damage or injury.

Contact: Steve Hill, VP Sales Americas Email: [email protected] Ms. Annelea BlignautInternational Sales ExecutiveEmail: [email protected]. Gwenaële MontagnerVP Group MarketingEmail: [email protected] Address: 14 Winstar Road Shanty Bay, Ontario L0L 2L0, Canada Phone: 1-705-487-3007 Toll Free: 1-877-387-3007 Fax: 1-866-441-4007 Website: www.horne-group.com

lhorne ConveyanCe safety ltd.


linproheat industries ltd./ subCom

Hoisting Equipment & Accessories

Liquid Heating

Rotesco Inc. manufactures the Magnetester a dual-functioning, electromagnetic, steel-wire rope testing instrument. The Magnetester simultaneously indicates local faults (deterioration) in the form of broken wires, corrosion pitting, external wear, inter-strand wear and nicking, and rope distortion, while also measuring loss of metallic cross-sectional area caused by corrosion, broken wires, wear and local faults.

The loss of metallic cross-section, combined with the extent and nature of the local fault trace can be used to help determine when a rope has reached the end of its safe working life and should be removed. It can also be used to estimate the loss of breaking strength of a rope. Rotesco has been offering steel-wire rope testing services for more than 30 years and has one of the most extensive testing services in the world.

lrotesCo inC.

See Country Interests Section for Latin America and the Caribbean, and North America.

Contact:Rodney Pryde Address: Unit 25, 150 Milner Avenue Scarborough, Ontario M1S 3R3, Canada Phone: 1-416-291-9821 Fax: 1-416-291-4343 Email: [email protected] Website: www.rotesco.com

SubCom® has been helping mines around the world save money and time, while reducing GHG emissions, since 1972. That’s more than 35 years of research and development experience that has resulted in a deep understanding of the mining sector’s operational processes. Submerged combustion is used to heat or evaporate liquids and slurries, with efficiencies up to 99%.

Contact: Steve Panz, P.Eng. PresidentAddress: 680 Raymur Avenue Vancouver, British ColumbiaV6A 2R1, CanadaPhone: 1-604-254-0461Toll Free: 1-888-684-6776Fax: 1-604-254-6377Email: [email protected] Website 1: www.inproheat.com Website 2: www.subcom.ca

Heating, Evaporation Concentration For Mining Water, Brines, Slurries, Acids, Lixiviants

SubCom®

direct contact liquid heating systems

mining industry• Copper, gold and other heap leach

raffinates and lixiviant

• SX/EW solutions

• Mine decommissioning processes

• Brine solutions for Potash and salt mines

• Iron Ore concentrate slurries

• Calcium Chloride and Copper Sulphate concentration

Wastewater treatment• Sludge pasteurization

• Effluent holding and treatment ponds

produced Water evaporators/Concentrators

flowback Water heating/evaporation

natural gas industry• Produced water (flowback water) evaporation

• LNG and other cryogenic gas vaporization

Inproheat Industries Ltd. designs and manufactures SubCom®


Hydraulic Components & Accessories

Parker Hannifin is the world’s leading diversified manufacturer of motion and control technologies and systems. Parker’s comprehensive range of

connector, electromechanical, filtration, hydraulic, instrumentation, pneumatic and seal products and associated systems are used in all segments of the mining industry. Parker’s application and market specialists can be counted upon to partner with you from mine development to OEM equipment in order to increase your productivity and profitability. Customer-focused services such as Parker Onsite, SafetyWorks Safe Hose Practices, and the Parker Tracking System provide the facilities for immediate hose identification and replacement. State-of-the-art CAN Bus electronic controls communicate with multiple systems and offer powerful built-in

self-diagnostics to keep your equipment running at maximum performance. Whether it’s a single product, sub-assembly or total turnkey system, Parker has the solution that aligns with your needs. Make Parker your first choice to engineer your success.

Contact: Shari ThatcherProgram Manager Address: 160 Chisholm Drive Milton, Ontario L9T 3G9, Canada Phone: 1-905-693-3000 Fax: 1-905-693-4290 Email: [email protected] Website: www.parker.com

lparker Canada division

Lynch Fluid Controls is an ISO 9001 and AS9100 certified company, dedicated to designing and manufacturing hydraulic, motion-control manifolds and integrated systems for the mining industry. Lynch is one of the most automated manifold manufacturing plants in North America and the company has one of the largest dedicated hydraulic manifold design teams on the planet. For more than 26 years, Lynch hydraulic systems have been used successfully by mining OEMs for all types of machinery. Using Lynch manifolds ensures global availability of spare parts. Lynch hydraulic valve manifolds can eliminate up to 60% of

hose and tubing requirements, saving substantial time, material and labor costs. Lynch manifolds are designed for serviceability and allow for ease of maintenance in the field which minimizes downtime and disruption. Complete support includes conceptualization, engineering,

component selection, 3D modeling/design, machining, assembly, documentation and validation. Lynch’s dedication to quality and customer service “will exceed your expectations.” Call to discuss your application today!

Contact: Ken Mah M.A.Sc. P.Eng. Director of Strategic Partnerships Address: 1799 Argentia Road Mississauga, Ontario L5N 3A2, Canada Phone: 1-905-363-2400, ext. 254 Fax: 1-905-363-1191 Email: [email protected] Website: www.lynch.ca

llynCh fluid Controls inC.

there are 50 subsectors listing mining suppliers presented in this Compendium.

www.camese.org


Information & Marketing Services

The Canadian Mining Journal (CMJ) serves the operations segment of Canada's mining industry. It provides its readers with the latest products, methods and technologies used in mining and mineral processing. CMJ is Canada’s first mining magazine, published continuously for over 130 years. With more than 27,000 readers and a long-established reputation for editorial quality and depth on topics that matter, the Canadian Mining Journal is the only non-association and circulation-audited mining publication in Canada. CMJ can deliver your advertising message to

the key decision-makers in Canada’s $32-billion-per-year exploration/mining industry. Professional art direction and the generous use of four-colour graphics ensure an attractive milieu for your advertisement. Published 10 times a year by the Business Information Group, Canada’s largest publisher of trade magazines, this glossy magazine has competitive rates and excellent customer service. The Canadian Mining Journal also publishes an annual Buyers' Guide of suppliers to the industry in November, and the New Mining Technology magazine in August.

lCanadian mining Journal

Contact: Robert Seagraves, Publisher Email: [email protected] Rondeau, SalesEmail: brondeau@ canadianminingjournal.comRussell Noble, EditorEmail: [email protected] Scales, Field EditorEmail: [email protected]: 1-613-270-0213Fax: 1-613-592-6858Address: 80 Valleybrook DriveToronto, Ontario, M3B 2S9, CanadaPhone: 1-416-510-6891Toll Free: 1-800-268-7742, ext. 6891 (Canada)Fax: 1-416-510-5138Toll Free: 1-800-387-0273, ext. 6891 (U.S.A.)Fax Toll Free: 1-800-387-0273 (U.S.A.)Website: www.canadianminingjournal.com

InfoMine is your online mining and mineral exploration community, providing information on worldwide activities and a means to interact with your colleagues via a suite of media sites. Get all the project facts, find out which companies in which to invest, find that perfect job, hire staff, contract a supplier, hire a consultant, buy equipment, expand your knowledge, take courses, evaluate mine costs, download technical papers, attend events . . . it’s all on InfoMine. Delivering multilingual information via a suite of focused

websites to more than a million unique visitors every month, InfoMine is also a great place to get your message out. Put your product, service or investment opportunity in front of InfoMine’s worldwide mining and mineral exploration audience.

Contact: Marcia Mendonca Marketing & Sales ManagerEmail: [email protected] ParkinsonCommunications ManagerEmail: [email protected]: Suite 900, 580 Hornby Street Vancouver, British ColumbiaV6C 3B6, CanadaPhone: 1-604-683-2037Fax: 1-604-681-4166Email: [email protected] Website 1: www.InfoMine.com Website 2: www.MINING.com

linfomine

you never really know a market until you go there and see it for yourself. exhibiting at a trade shoW with Camese is a great way to start!


Information & Marketing Services

Signature Group of Companies: Over time, your image may evolve, but your signature remains the same. It’s unique to you, just as your brand image is your corporate signature in a challenging marketplace. The Signature Group provides an all-inclusive creative solution designed to add consistency, continuity and overall impact to your brand image, marketing and trade show program, including image-assessment review, brand development or re-design, corporate identity and standards,

marketing materials/product literature, client communication, trade-show displays and graphics, advertising, web design and multimedia/animation. It’s time to be prepared. It’s time to get inspired. It’s time to move forward. Engage the Signature Group to make your company the best it can be.

Contact: Tom Hewlett, PresidentAddress: Unit 15 598 Falconbridge Road Sudbury, OntarioP3A 5K6, CanadaToll Free: 1-877-688-1989Email: [email protected] Website: www.signaturegroupinc.com

lsignature group of Companies

The Northern Miner is the world’s foremost weekly mining newspaper covering the global activities of mining companies. Through a weekly newspaper, daily online news service and a weekly digital edition, it provides accurate, timely and authoritative reporting on exploration and mining activity, industry news, property acquisitions, drilling results, mergers and acquisitions, mining and metal markets, and much more. By routinely visiting mine sites and exploration projects, The Northern Miner’s experienced mining journalists

keep their readers up-to-date on the latest developments at home and abroad. Since 1915, The Northern Miner has been “the bible of the mining industry.” It boasts a 100% paid circulation. Its commentaries and editorials examine a wide range of relevant industry issues. Investors are kept informed with timely summaries of mining market activity on North American exchanges and extensive stock table data. The Northern Miner provides advertisers with a cost-effective forum to showcase their properties, products and services.

Contact: Doug Donnelly, PublisherEmail: [email protected] Oliveira, SecretaryEmail: [email protected]: 80 Valleybrook DriveToronto, Ontario, M3B 2S9, CanadaPhone: 1-416-442-2098Fax: 1-416-510-5138Website: www.northernminer.com

lthe northern miner


Can you name what consumer products rely on mining?

• Batteries (nickel, cadmium, lithium, cobalt)

• Circuitry (gold, copper, aluminum, steel, lithium, silver, cobalt, tin, lead, zinc)

• Computer and TV screens (silicon, boron, lead, barium, strontium, phosphorous, indium)

• Energy (coal, uranium, oil sands)

• Musical instruments (copper, silver, steel, nickel, brass, cobalt, copper, iron, aluminum)

• Sports equipment (graphite, aluminum, titanium, calcium carbonate, sulphur)

• Vehicles and tires (steel, copper, zinc, barium, graphite, sulphur, bromine, iodine)



Insurance Consultants & Services

Hallmark Insurance Brokers Ltd. understands mining and the needs of mining equipment and services suppliers. Junior mining and exploration companies, contractors, consultants, equipment manufacturers and servicers as well as geophysical and laboratory services all rely on Hallmark to take care of their insurance needs. Hallmark Insurance provides Property and Liability coverage both above and below ground, and covers airborne and waterborne operations worldwide. From Directors and Officers to Environmental Impairment and from Kidnap & Ransom to Errors and Omissions, Hallmark has the markets and the expertise to provide exactly the coverage you need. Hallmark Insurance has been in business for

more than 60 years and has assembled a dedicated, experienced team to deliver the value-added services that only experience and dedication can provide: Risk Management Consulting, Loss Control, Employee Benefits Integration and Premium Financing.

Contact: Ron Courneya Account Director Quality Specialist Commercial Solutions Address: 10 Konrad Crescent Markham, Ontario L3R 8T7, Canada Phone: 1-905-944-4073 Toll Free: 1-800-492-4070, ext. 299 Fax: 1-905-944-0273 Email: [email protected] Website 1: www.hallmarkins.comWebsite 2: www.hallmarkins.com/business-insurance/mining-insurance-in-canada/

lhallmark insuranCe brokers ltd.

Checkfluid Inc. is the world’s leading supplier of oil sampling valves for pressurized and non-pressurized lubricated mining systems. Checkfluid valves deliver the safest, most representative samples possible. Data-rich samples ensure the accurate reporting needed to make quick, confident decisions on oil and machine conditions. Checkfluid has saved millions of barrels of oil as leading companies around the world learn to optimize their drain intervals. Significant savings have resulted from the earliest detection of pending machine malfunction and the avoidance of catastrophic production losses. Its low-cost sampling valves – most with easy installation options – provide one

of the best returns of any preventative maintenance investment. Checkfluid designs, manufactures and distributes a wide variety of oil sampling hardware products to many of the largest and most advanced companies worldwide. Checkfluid is committed to the highest level of quality and service through its ISO9001:20008 program.

Contact: Bernie HallGeneral Manager Mark HallMarketing & Sales Address: 4070 Eastgate Crescent London, Ontario N6L 1B2, Canada Phone: 1-519-652-6373 Toll Free: 1-866-652-8728 Fax: 1-519-652-0392 Email: [email protected] Website: www.checkfluid.com

lCheCkfluid inC.

Mine Maintenance, Repair and Operation Tools or Supplies


Management Consulting Services

EDC Mining Ltd. (Engineering, Design and Construction) provides cutting-edge engineering and support services for mines around the globe. Specializing in shaft sinking and utilizing the latest software, EDC provides complete engineering services for whatever your needs may require. Beyond current techniques, EDC is also heavily involved in the development of two entirely new mining methods: 1) Double Post Mining, which will revolutionize the mining of applicable ore bodies, and 2) Narrow Vein Alimak Mining, in

which EDC will assist in its development. EDC can provide the experienced supervision required to ensure your projects unfold as planned while offering complete contracting services through its partner Obra Mineras y Tiros Del Centro of Aguascalientes, Mexico. With offices in Toronto, Canada, and Aguascalientes, Mexico, EDC is well-positioned to provide the engineering you need, while ensuring your project is completed on time and on budget.

Contact: Mike Arriagada VP of Mining Address: Suite 903 141 Adelaide Street West Toronto, Ontario M5H 3L5, Canada Phone: 1-416-368-4448 Fax: 1-416-203-1254 Email: [email protected] Website: www.edcmining.com

ledC mining ltd.

C.J. Stafford & Associates is a recognized leader in executive search, recruitment and project staffing for the global mining, metals and minerals industries. Their dedication and active involvement in these industries for more than 30 years provide a competitive advantage when attracting and hiring the industry’s best talent for their clients. Alliances with the most knowledgeable and experienced

search consultants – strategically located in Australia, Canada, Chile, Peru, South Africa, the United Kingdom and U.S.A. – further enhance C.J. Stafford & Associates’ international search and recruitment capabilities. By bringing an in-depth knowledge base of the mining industry to the search process, C.J. Stafford & Associates succeed in matching the needs and wants of their candidates and clients.

Contact:Chris Stafford, President Rick Hutson, Senior ConsultantSteve Petrovic, Senior Consultant Irene Gosende Seeney, Research and Marketing Manager Address: Suite 501 2323 Yonge Street, Toronto, Ontario M4P 2C9, Canada Phone: 1-416-484-1960 Fax: 1-416-484-0626 Email: [email protected] Website: www.cjstafford.com

lC.J. stafford & assoCiates

lglobal partner solutions mining and industries inC.Global Partner Solutions Mining and Industries Inc. (GPSi) provides project procurement management for CAPEX, OPEX, sustainable projects – from prefeasibility through to execution. GPSi will drive engineering deliverables to insure timely deliveries to site of equipment and materials to meet your construction-driven schedules. During your execution phase, GPSi will provide you with early visibility and predictability on your risks and possible impacts to your construction schedule.

Contact: Robert Allard President Address: 1415, 32nd Avenue Lachine, Québec H8T 3J1, Canada Phone 1: 1-514-636-6045 Phone 2: 1-514-894-3237 Fax: 1-514-780-1310 Email: [email protected] Website: www.gpsi-intl.com

Linking it together through efficientproject procurement management


Management Consulting Services

Praetorian Construction Management provides professional project construction management services for Canada’s mining industry that covers both open pit and underground operations. Praetorian serves as its client’s frontline interface for the construction of new and existing mining facilities including pre-job planning and feasibility studies. The company’s construction management expertise encompasses the coordination of all aspects of engineering, mining and contracting associated with mining construction projects. As an independent project management company without ties to engineering and contracting firms, Praetorian provides clients with an unbiased approach to completing projects. This enables its team to recommend the most appropriate engineering firms and other contractors based solely on expertise and suitability for the project at hand. Praetorian takes pride in overseeing projects that are executed safely and completed on schedule and within established budgets.

Contact: Greg Topinka, P.Eng. Vice President – Technical Services Address: Suite 201 10441-178 Street Edmonton, Alberta, T5S 1R5, Canada Phone: 1-780-989-0289 Fax: 1-780-989-0290 Email: [email protected] Website: www.praetoriancm.com

lpraetorian ConstruCtion management

KEY MINING ISSUESCanada’s future? According to recent MAC research, Canada’s mining industry plans to invest $140 billion in projects over the next decade, with multiple billions in each of british Columbia, Alberta, Saskatchewan, Ontario, Quebec, newfoundland and Labrador, nunavut and the northwest Territories. no doubt some of these projects may face obstacles and delays, but the figure does suggest the scale of mining-related jobs, supply contracts and tax revenues that lie ahead for Canada. The future of these projects is shaped by many issues, domestic and global, of which five are particularly relevant.

Source: FACTS & FIGURES 2012 The Mining Association of Canada


Mapping Services

Eagle Mapping Ltd. delivers high-quality LiDAR data, colour digital mapping and imagery tailored to your unique needs. Since 1985, Eagle Mapping has maintained a proven and respected profile of quality mapping accomplishments throughout North and South America, as well as in many other parts of the world. The company utilizes its own LiDAR equipment, digital camera and airplane operated by experienced expert employees. With its experienced surveyors, Eagle Mapping ensures accurate mapping with ground/GPS control. Also included is its in-house expertise, equipment and software to accurately post-process all data and imagery to provide you with quality deliverables. With Eagle Mapping performing all

aspects from acquisition to processing of data and imagery through to the final deliverables, it can guarantee quality and accuracy. Eagle Mapping has the resources to accomplish any project, yet it’s small enough, with service-directed employees, to listen to your requirements and deliver a custom map to fit your specific needs.

Contact:Lloyd Hume, Vice PresidentEmail: [email protected] Glenn Granger, Geomatics ConsultantEmail: [email protected] Address: 201-2071 Kingsway Avenue Port Coquitlam, British ColumbiaV3C 6N2, CanadaToll Free: 1-877-942-5551Fax: 1-604-942-5951Website: www.eaglemapping.com

leagle mapping ltd.

Effigis Geo-Solutions Inc. (formerly VIASAT GeoTechnologies) designs, develops and implements geospatial solutions. The company provides consulting services that harness the power of geotechnologies including stereoscopic satellite imagery, GPS, geographic information systems and location-based services. Effigis’ group of geoscientists offers a unique counter for mining solutions ranging from grassroots exploration to mine-site exploitation. Effigis assists you in getting maximum benefits from all available sources of satellite imagery and geoscience data for your area of interest, regardless of its location. Using state-of-the-art technologies that combine digital-image analysis, DEM generation, data fusion and data modeling, Effigis’ services include alteration mapping, structural mapping, mineral potential

assessment and environmental monitoring. By targeting the most favorable areas for exploration and supporting EIA, related to mine-site operations, Effigis helps you reduce your field investigation costs. Benefits include lower financial risks, faster ore-deposit discovery and support in your SD commitments. Founded in 1991, Effigis is 100% privately owned with a staff of more than 100 professionals and technicians to help you improve your business processes with solutions incorporating geospatial databases.

Contact: Michel Rheault, Vice PresidentBusiness Development in Earth Observation Mining, Oil & Gas SectorAddress: Suite 400, 4101 Molson StreetMontreal, QuebecH1Y 3L1, CanadaPhone: 1-514-495-6500Phone: 1-514-495-6500, ext. 185Fax: 1-514-495-4191Email: [email protected] Website: http://effigis.com

leffigis geo-solutions inC.


Mine Site Construction

AIL MINING, is a world leader in efficient mine infrastructure solutions in structural plate and MSE wall systems for heavy haul road and rail arches, MSE crusher walls and retaining walls, stockpile, conveyor and escape tunnels and portals, bridges and drainage structures. Custom, value-engineered solutions from AIL MINING have been supporting many of the world’s most successful mine sites for more than 40 years. By design, its solutions ship and install easily, making AIL MINING

ideal for remote locations. An award-winning innovator, AIL MINING has taken mine infrastructure to a new dimension with the launch of the world’s strongest structural steel plate: Ultra•Cor® – with spans and cover height capabilities up to 30 m. To ensure your project’s success, AIL MINING’s in-house engineering teams will work with you through the entire project cycle – providing engineering support, interpreting drawings, advising on specifications, and supervising installations. Save time and money on mine site infrastructure. Talk to the mine infrastructure experts at AIL MINING. They’re big on mining!

Contact:Stephen MacKinnon VP International OperationsPhone: 1-506-364-4614Fax: 1-506-364-4609 Email: [email protected]

Peter Mesheau VP Sales and Marketing Address: AIL Group32 York StreetP.O. Box 6161Sackville, New BrunswickE4L 1G6, CanadaPhone: 1-506-364-4603Fax: 1-506-364-4609Email: [email protected] 1: www.ailmining.com Website 2: www.ail.ca

lail mining

Aran International has garnered a position as a developer of highly mobile and versatile mixing equipment. Involved with mining operations in Australia, Africa, North and South America, Aran’s experience is focused on mixing tailings and other mine waste to produce backfill for underground mines. Servicing the mining industry is a core focus of Aran’s activities. From the supply of specialized mixers to processing plants and complete service solutions including

engineering services, specialized equipment and operators, Aran embraces and respects the environment to ensure a small footprint after the job is complete. Aran makes certain your mining operations are more efficient, safe and environmentally responsible.

Contact: Shane Dunstan, President Address: Suite 1004 100 Adelaide St. West Toronto, Ontario M5H 1S3, Canada Phone: 1-647-284-3866 Email: [email protected] Website: www.aran.com.au

laran international ltd.

R

free marketing exposure – Camese posts members’ press releases under member news online and tweets headlines.



Armtec is a leading manufacturer and distributor of steel and high-density polyethylene construction products for the mining, infrastructure, forestry and municipal markets in Canada and around the world. Many Armtec facilities are ISO 9001:2000 certified, which, together with its wide range of products, allows Armtec’s experienced and technically trained sales force and full engineering department to provide its customers with cost-effective and efficient solutions for their project needs. Armtec’s range of solutions is designed to meet the specialized needs of today’s mines. Its products provide engineered solutions for mine development, materials handling and mining operations, including HDPE pipe for mine dewatering, heap leach

collection and drainage; haul road bridges; mine portals; stream crossings; rockfall protection; conveyor covers; tunnel liners for soft ground or drift protection; raisebore liners for vertical shafts; and geotextiles for environmental protection, slope reinforcement and soil stabilization; and more. Since 1908, commitment to superior customer service and product quality has earned Armtec its enduring and steadfast success.

larmteC limited partnership

Contact:Doug Leitch, P.Eng. Manager International Sales Address: P.O. Box 3000 370 Speedvale Avenue West Guelph, OntarioN1H 6P2, CanadaPhone: 1-519-822-0860, ext. 330Fax: 1-519-822-3267Email: [email protected] Website: www.armtec.com


the mining industry’s Contribution to Canada

Despite challenges, the prevailing view is that the Canadian mining sector’s economic prospects will be strong for the long term. Regardless of recent concerns over the growth rates of the BRIC countries (Brazil, Russia, India, China), which have largely been considered the driving force behind global growth, it is widely held that the longer-term fundamentals are solid. This means that growth, even if at a moderately reduced pace, is likely to remain strong over the long term.




Praetorian Construction Management provides professional project construction management services for Canada’s mining industry that covers both open pit and underground operations. Praetorian serves as its client’s frontline interface for the construction of new and existing mining facilities including pre-job planning and feasibility studies. The company’s construction management expertise encompasses the coordination of all aspects of engineering, mining and contracting associated with mining construction projects. As an independent project management company without ties to engineering and contracting firms, Praetorian provides clients with an unbiased approach to completing projects. This enables its team to recommend the most appropriate engineering firms and other contractors based solely on expertise and suitability for the project at hand. Praetorian takes pride in overseeing projects that are executed safely and completed on schedule and within established budgets.

Contact: Greg Topinka, P.Eng. Vice President – Technical Services Address: Suite 201 10441-178 Street Edmonton, Alberta, T5S 1R5, Canada Phone: 1-780-989-0289 Fax: 1-780-989-0290 Email: [email protected] Website: www.praetoriancm.com

lpraetorian ConstruCtion management

buyers benefitAs a mining industry end-user, broker, agent, or distributor, CAMESE will help you discover the broad range of goods and services offered to the mining industry by our member firms. You can broadcast your message or your requirement to our more than 300 members via our “members only business opportunity service.” There is no charge for this service, but you must be a registered user of the website to access this feature. Once you submit a business opportunity, it will be reviewed, and you will be contacted within two to three Canadian business days. If your query is approved, you will be notified when it is released to the members. For more information, contact Spencer Ramshaw, Director – Information and Communications, at [email protected].



This dryer is used in the final stage of the process at IAMGOLD’s Niobec Niobium Mine, Saguenay Region, Québec, Canada.

Mineral Processing Equipment & Supplies

lheath & sherWood

Heath & Sherwood has been a supplier of quality solutions to the mining industry since 1927. The company is known for close contact with its customers and prides itself on client service that adapts the product line to specific customer needs. Heath & Sherwood supplies a complete line of standard and custom-designed samplers for feeding process control analyzers, metallurgical accounting and inventory control requirements. A variety of samplers for pipes (gravity or pressurized flow), high-flow launders, conveyors, chutes and bulk containers is available. When following Good Sampling, profits are protected within the process. Recently added to the Mineral Processing product line is BGRIMM process analyzers for on-stream analysis of metal content and particle size plus other instruments for mineral

processing plants. Headquartered in Kirkland Lake, Ontario, Heath & Sherwood has subsidiary offices in Mississauga, Ontario, and representatives in Brazil, Mexico, Peru, Chile, India, Italy and Australia.

Contact: Phillip A. Cancilla Address: P.O. Box 340 Kirkland Lake, OntarioP2N 3J2, CanadaPhone: 1-905-275-2906, ext. 22Fax: 1-905-275-3357Email: [email protected] Website: www.heathandsherwood64.com

Ask about our NEW on-line XRF Analyzer product line.



Fournier Industries Inc. was founded in 1960 to serve the mining industry and continues to maintain its leadership role. With an experienced team of engineers, draughtsmen, project managers, automation and control technicians as well as pneumatic and hydraulics’ technicians, Fournier Industries successfully executes turnkey projects from conception to start-up through

detailed engineering, drawing, project management, manufacturing, logistics and field installation. The last versions of Autocad, Autocad 3D, Solid Works, HPM Cad and Inventor Pro are used to better meet customer needs.

Contact: Gaston Tanguay Address: 3787 boul. Frontenac Ouest Thetford Mines, Québec G6H 2B5, Canada Phone: 1-418-423-4241 Fax: 1-418-423-7366 Email: [email protected] Website: www.fournierindustries.com

lfournier industries inC.

Canadian Wear Technologies – “Your chrome white iron specialists” provide wear solutions for oil sands and hard-rock mining. Serving the mining industry since 1985, Canadian Wear Technologies offers a range of products covering basic to advanced wear protection. The Abreco Wear System™ has proven to increase production uptime significantly in primary crushing circuits in hard-rock mining. Products include AbrecoPlate®, AbrecoPipe®, Ultra Wear® Chromium-Carbide Overlay Plate & Pipe, AR Plate, UHMW, ceramic liners and castings in a variety of alloys. Services include custom and co-design, complete fabrication, CAD service and inventory replenishment programs.

The company’s goal is to continue its steady growth by helping its customers reduce operating costs related to wear and by making it easy for them to source replacement materials. AbrecoPlate® is a premium wear material that simply outlasts other materials on the market today; it’s a composite of extremely wear-resistant, high-alloy, high-carbide cast white iron 700+ BHN (64 Rc) that is metallurgically bonded to a mild steel backer plate. The backer plate provides

weld ability and impact resistance. AbrecoPipe® is the world’s first and only centrifugally cast, bimetallic, seamless piping for severe abrasion and erosion that can be formed into long radius elbows, consisting of a chrome white iron inner wear layer metallurgically bonded to a ductile steel outer layer (4-in. to 34-in. OD). Both AbrecoPlate® and AbrecoPipe® outperform chrome carbide overlays by a factor of five.

See Country Interests Section for Europe, Latin America and the Caribbean, and North America.

Contact:Keith HolbrookPresident Email: [email protected]: 1-905-373-9327, ext. 308Bill LeeDirector Sales & MarketingEmail: [email protected]: 1-905-373-9327, ext. 305Nathaniel ElderProduct Engineer Email: [email protected]: 1-905-373-9327, ext. 319Address: 675 Brook Road North Cobourg, Ontario, K9A 4J8, CanadaFax: 1-905-373-4172Email: [email protected] Website: www.canadianweartech.com

lCanadian Wear teChnologies



Bradken’s Mineral Processing Division is a market leader in the design, manufacture and supply of differentiated high-quality mill and crusher products and services for the mining and quarrying industries. Bradken focuses on providing its customers with innovative, cost-effective, complete wear-liner solutions for mills and crushers, designed to increase performance and reduce operating costs in grinding and crushing operations. Bradken maintains an extensive regional-based sales and product development workforce located across North America, South America, Australia, Southeast Asia, Africa, and Europe. Bradken’s capabilities in the mineral

processing and quarrying markets include: mill liners and fasteners for SAG/AG mills, ball mills and rod mills; liners for gyratory, cone and jaw crushers; engineered spare parts for mills and crushers; chute liners and apron-feeder pans; Vertimill components; wear monitoring and

reporting; and liner optimization studies, including discrete element modeling (DEM) and 3D scanning. Bradken’s international network of sales and service centers provides you with top-quality products, service and technical support.

Contact: Gabe Larose Sales & Marketing Manager Address: Suite 400 90 Richmond Street East Toronto, Ontario M5C 1P1, Canada Phone: 1-416-975-8251 Fax: 1-416-975-8253 Email: [email protected] Website: www.bradken.com

lbradken mill liners

American Biltrite: For premium equipment protection in the toughest mining application insist on Dura-Shield abrasion-resistant rubber from American Biltrite. The latest addition to the Dura-Shield family, Dura-Shield A+ is a premium lining material that ensures surface protection against corrosion plus abrasion for machinery and equipment and is simply the most abrasion-resistant rubber in heavy-duty equipment in applications where abrasion resistance is critical: linings, skirting, pulley lagging, shaker screens and sandblast curtains. Dura-Shield is available in 40- and 60-durometer versions – most with bonding layers. An adhesive line for cold-bonding rubber is also available.

Contact: Bob Davidson Address: 200 Bank Street Sherbrooke, Québec, J1H 4K3, Canada Phone Toll Free: 1-888-275-7075 Fax Toll Free: 1-877-271-1751 Email: [email protected] Website: www.american-biltrite.com

lameriCan biltrite

prospecting for more export business? Join Camese.Use association leverage to boost your sales power. Find out how to become a member at www.camese.org.



For more than 50 years, Fabrithane Industrial Products Inc. has manufactured cast-urethane wear parts for the mining, construction, forestry, pulp and paper industries. Some of the parts manufactured and

relined by Fabrithane include PUMP AND FLOTATION such as Denver, Flyght, Galigher, Outokumpu, SRL, Wemco; JUMBO DRILL PARTS like centralizer bushings, stinger pads, slide rails, wear pads, hose reels, etc.; CONVEYOR PARTS that include belt scrapers, skirting, guide rollers, cable belt wheels, pulleys, idler wheels, chute liners, cyclone parts, head liners, cover plates, vortex finders and apex liners. With in-house design, tooling and mould manufacturing, Fabrithane can custom manufacture urethane parts to suit all customers’ needs.

Contact: Jean-Guy Perreault President Address: 6, 10th Avenue North P.O Box 68 Earlton, Ontario P0J 1E0, Canada Phone: 1-705-563-2223 Fax: 1-705-563-8201 Email: [email protected] Website: www.fabrithane.com

lfabrithane industrial produCts inC.

Abresist Kalenborn Inc. is a part of the Kalenborn Kalprotect Group, a leading provider of wear protection and slide-promotion solutions around the world for the last 80 years. With the knowledge that one product cannot solve all wear problems, Abresist Kalenborn designs and manufactures its basalts, ceramics, chromium carbide overlay plates and pipes, alloyed castings, rubber and synthetics to meet the customer’s specific abrasion, impact and corrosion problems. The combination of different wear-resistant materials

provides a more intelligent solution to each wear problem. Abresist Kalenborn’s purpose is to keep the solution simple but effective, and then deliver to you the complete package, including field measuring, drafting, manufacturing and installation.

Contact: Sebastian Allard, Territory Manager Address: Head Office Suite 602, 755 St-Jean Blvd. Pointe-Claire, QuébecH9R 5M9, CanadaPhone: 1-514-426-0460Cell: 1-514-893-8461Fax: 1-514-426-0462Email: [email protected] Website: www.abresistkalenborn.ca

labresist kalenborn inC.

Innovators of KALFLEX®, flexible wear protection.

Montreal Tractor Inc. is celebrating its 31st year as a distributor of heavy equipment, components and parts for the construction, mining and forestry industries. Product lines represented are Roadtec, Kawasaki, Sakai and Multi-One. Montrac Crushing Systems, a division of Montreal

lmontreal traCtor inC.

Tractor, distributes Telsmith, Astec Mining, Hazemag, Deister, Polydeck and Thor. Montrac offers clients a full range of services from crusher sales, parts and specialized services including the development of custom plants and turnkey projects. For more details, please contact the member.

Contact: Joseph Amato, PresidentAddress: 21601 Av Clark GrahamBaie D’urfe, Québec, H9X 3T5, CanadaPhone: 1-514-457-8100Toll Free: 1-800-361-2282Fax: 1-514-457-5051Email: [email protected] Website: www.montrealtractor.com






lmeCaniCad inC.

lnovaflex group

NovaFlex is a leading North American manufacturer of quality hand-built

rubber hoses and connectors, custom-made material handling hoses, backfill hoses, expansion joints, pump connectors, pinch valves, bellows and feed spout hoses for ball mills as well as an extensive petro-chemical line. Based on the specifications of the application, NovaFlex is able to design virtually any required feature into a product. Throughout its development, the client is consulted. The process starts with knowledgeable field staff evaluating the application followed by hose designers and experienced hose

craftsmen developing and manufacturing an appropriate hose. With this process, custom solutions for every material-transfer requirement can be provided.

Contact: Sales Department Address: 555 Beck Crescent Ajax, Ontario, L1Z 1C9, Canada Phone: 1-905-731-9411 Fax: 1-905-731-7086 Email: [email protected] Website: www.novaflex.com

Hayward Gordon Ltd., in its more than 60 years of successful mixer installations, has established a reputation for supplying reliable and robust mixing equipment. Hayward Gordon has been actively involved in the selection, design and manufacture of mixers for the mining and mineral process industry. During this time, Hayward Gordon has developed an expertise and installation portfolio second to none as it has moved to the forefront serving many of the largest and most innovative projects in the world. Hayward Gordon’s experience

and expertise in mixing technology combined with leading-edge CFD capability in its in-house mixing lab for slurry sample testing ensure that your process and mechanical expectations of its equipment are exceeded. Examples of successful agitator installations include gold Leach (CIL), cyanide destruction, solvent extraction, autoclave agitators (oxidation/reduction/leach), pipeline

storage, bio-leach, attrition scrubbers and conventional conditioning. To discover how you can extract wealth using Hayward Gordon expertise, visit the company’s website.

Contact:Graham Hicks, Vice President Manufactured Products Address: 5 Brigden Gate Halton Hills, Ontario, L7G 0A3, Canada Phone: 1-905-693-8595 Fax: 1-905-693-1452 Email: [email protected] Website: www.haywardgordon.com

lhayWard gordon ltd.



KPM Ltd. serves the mining industry with superior products that reduce the operating costs for handling abrasive materials. KPM’s ability to supply complete slurry handling and dewatering systems sets it apart. KPM products include rare earth magnetic couplings for torque and speed control, slurry pumps and vertical turbine pumps, long-life ceramic linings, which extend service life and give predictable service cycling, improving reliability and availability. KPM SuperSleeves™ provide shaft protection and Zirmax ceramics provide superior wear for specific sites within pump casings and side plates. Each application is assessed and a suggested solution is backed by performance improvement guarantees. The ability to tailor a solution to your specific problem has made KPM the choice of many of North America’s largest mineral processing plants. KPM-lined pumps, pipes, valves, feed chutes and

elbows significantly reduce maintenance and down-time costs for mineral processors. KPM also offers complete, skid-mounted pump and filtration packages.

See Country Interests Section for Asia-Pacific and North America.

Contact:Eric Dean International Sales Manager Address: 1860 Kelly Douglas Road Kamloops, British ColumbiaV2C 5S5, CanadaPhone: 1-250-828-8708Fax: 1-250-372-9800Email: [email protected] Website: www.pumpwear.com

lkpm ltd.

Abrasive pumping at half the cost

Major Wire manufactures and distributes premium-quality screen media to mining operations. Major Wire’s high-performance screen media not only increases screen capacity and throughput, it also eliminates blinding, pegging and clogging while maximizing wear life and significantly reducing downtime. These innovative solutions include: 1)Flex-Mat® 3 in modular and tensioned versions. Constructed of polyurethane strips that bond

independently vibrating wires, it provides up to 50% more screen capacity than woven wire and polyurethane panels and eliminates common problems for far better screening efficiency. Flex-Mat 3 Double-Wire™ utilizes two side-by-side wires to provide the same benefits in higher impact applications or when larger opening sizes are required. 2) OptimumWire®, the strongest woven wire in the industry, provides up to 40% longer

wear life when compared to traditional woven wire. Double-Weave™ uses two side-by-side, lighter-gauge woven wires that wear longer and handle up to four times more impact than larger single-strand wire.

Contact:Alain Charbonneau Technical Sales Manager, MiningAddress: 225 North Montcalm Blvd. Candiac, QuébecJ5R 3L6, CanadaPhone: 1-450-659-7681Cell: 1-514-475-3415Fax: 1-450-659-5570Email: [email protected] Website: www.majorwire.cc

lmaJor Wire industries limited



Megatraction Equipment Inc. is the Canadian-based company that has brought the very first 100%-safe lifting system designed for the maintenance of large production mining shovels to the mining industry. The company invented and patented this modern method of lifting shovels under the name MEGALIFTER®. Since 1997, this amazing shovel-lifting system has been seen around the world and its third generation (3G MEGALIFTER®) is now available. The MEGALIFTER® meets international safety standards ISO 13849-1 and exceeds competitive offers; thus, it remains the ultimate solution to split shovels safely and efficiently. The system is based on a patented twin-jack, rigid-frame design offering 100% redundancy on the

hydraulics for maximum safety and its configuration can be customized to any specific shovel fleet. Also included is a PLC-based automated operation with laser-level sensors, color touch-screen HMI, storage compartment for hoses, cables, accessories and more. Virtually maintenance-free, the MEGALIFTER® can be rented or purchased as desired.

Contact: Christian Belley, P.Eng.President Address: 346 Simon-Bolivar Québec City, Québec G1C 7G4, Canada Phone: 1-418-951-6679 Email: [email protected] Website: www.megatraction.com

lmegatraCtion equipment inC.

lmcCloskey international ltd.McCloskey International Ltd. leads the screening and crushing industry with a complete line of equipment including crushers, vibrating screeners, trommels and stacking conveyors. Built with power and durability as standards, every product is field-tested before being deployed through a global network of dealers into a wide range of industries, which include mining, quarries, aggregates processing, road building, construction and demolition, waste recycling, compost screening and wood recycling. Since 1985, McCloskey International has stayed ahead of its competition by listening to its customers and this feedback continues to motivate the McCloskey Engineering Team to design and build equipment that exceeds industry standards.

Contact:WORLDWIDE HEADQUARTERS John O’Neill, Vice-President Sales and Marketing Address: 1 McCloskey Road R.R. #7 Peterborough, Ontario K9J 6X8, Canada Phone: 1-705-295-4925 Toll Free: 1-877-876-6635 Fax: 1-705-295-4777 Email: [email protected] Website: www.mccloskeyinternational.com

Contact:EUROPEAN OFFICESeamus DoyleInternational Sales DirectorAddress: 47 Moor Road,Coalisland, Co. TyroneNorthern Ireland, BT7144QBPhone: 01144-28-8774-0926 Fax: 01144-28-8774-7242Email: salesuk @mccloskeyinternational.com

you can source online. go to:

www.camese.org



Polycorp is an ISO 9001 company that manufactures molded rubber mill linings, uncured sheeting and rail seal extrusions for mining and transportation. Polycorp has an impressive track record with quality-engineered products supplied since 1968. In 2011, Polycorp was chosen as one of Canada’s 50 Best Managed Companies. Conveniently located in the industrial heartland of southern Ontario, Polycorp services the mining industry with compound formulations, CAD design and a global sales network. With Polycorp’s unique product mix, you can expect custom solutions for all your rubber needs and mill liner requirements.

Contact: Pramod Kumar, P.Eng.Director Mining Division Address: 33 York Street Elora, Ontario, N0B 1S0, CanadaPhone: 1-519-846-2075, ext. 245Toll Free: 1-800-265-2710Fax: 1-519-846-2372Email: [email protected] Website: www.poly-corp.com

lpolyCorp ltd.

PR ENGINEERING LIMITED: With a solid reputation of providing the mining industry with the manufacturing and rebuild of rugged, dependable jaw crushers for almost 50 years, PR Engineering has taken its proven design technology to a new level… by downsizing! A “mini” version of their industry-leading Birdsboro Buchanan crushers provides the performance of a production crusher in a lab package. The “mini” Birdsboro Buchanan is the only crusher in its class to feature double-toggle action. This means better crushing performance with

a more consistent final product, less effort to crush the same amount of rock and reduced wear on moving parts. Weighing just 2,300 pounds, the “mini” is a portable, robust, 6-ft. x 10-ft. crusher that is ideal for sampling stations, pilot plants, prospecting, exploration, labs and quarries, and for use in adverse conditions where smaller lab crushers would be ineffective. It’s just another in the line of custom-engineered solutions by PR Engineering designed to “solve your crushing problem.” After all, size matters!

Contact:Linda Grieco, President Address: 249 Toronto Avenue Oshawa, Ontario L1H 3C2, Canada Phone: 1-905-579-9721 Fax: 1-905-434-6878 Email: [email protected] Website: www.prengineering.com

lpr engineering limited

premac #1 Mobile access Crusher



Precisioneering Ltd. designs and manufactures corrosion-resistant, engineered fibreglass equipment. Standard products include fibreglass pollution-control scrubbers, ventilation systems (fans, ducting and stacks), tanks, brine makers, grating, platforms, walkways and ladders. Customers continually challenge Precisioneering with their most difficult process-engineering problems because they have learned that Precisioneering’s results are innovative, cost-effective and long-lasting. They also find the company

to be flexible, responsive, and highly reliable in meeting deadlines. Precisioneering has successfully supplied the mining industry in North America since 1964. On staff, the company’s five engineers have more than 100 years of combined engineering experience in the mining industry. A dedicated quality control manager maintains tightly controlled, documented, quality systems, while a stable, long-term workforce ensures high-quality fabrication. Precisioneering is now part of Group DKG. Group DKG is

a rapidly growing global fibreglass equipment manufacturer with plants in the U.S.A. and Canada.

Contact:David WolfVice President Sales and MarketingAddress: 303 Nantucket Boulevard Scarborough, OntarioM1P 2P2, CanadaPhone: 1-416-751-9200Fax: 1-416-751-9382Email: [email protected] Website: www.groupdkg.com

lpreCisioneering ltd.

lrahnmet, the Crusher speCialists Rahnmet, The Crusher Specialists, are located in the heart of the North American mining industry. Rahnmet manufactures bronze wear parts and steel components for popular cone and jaw crushers, such as Symons™, Gyradisc™, Omnicone™, HP™, Sandvik™, Allis Chalmers™, Svedala™, Traylor™, and Telsmith™. The total crusher knowledge of Rahnmet specialists enables them to completely

remanufacture a crusher to the specifications of the original equipment manufacturer and offer a new crusher warranty. In addition to a 100,000-sq.ft. machine shop, Rahnmet operates a non-ferrous foundry capable of casting bronze wear parts weighing in excess of 15,000 lbs. Rahnmet, the only crusher parts manufacturer in North America, is completely independent

of any original equipment manufacturer.

Contact: Sharon LacasseAddress: 141 Regina Street P1A 1A1, CanadaPhone: 1-705-474-0410Fax: 1-705-476-6790Email: [email protected] Website: www.rahnmet.com

Tramac Equipment Ltd. has manufactured rock breaker boom systems for the crushed stone and mining industries for more than 30 years. Used in large dump pockets, the rock breaker systems have high-capacity gyratory crushers, carrying hammers up to 15,000 lbs., and horizontal reach measurements exceeding 20 meters. Tramac has models that are either off the shelf or customized through complex assembly creating modern options and accessories for diverse applications including telescoping booms, wheel loader scoop booms and unique hydraulic

articulating arm systems. Tramac Equipment also supplies boom lengths from 12 feet to 67 feet. Its TR series booms are custom-made to individual site requirements. For many applications, mounting towers and platforms are necessary. Such towers are available from Tramac and are designed and built to the individual needs of the user. For your next project, contact Tramac Equipment for personalized service.

Contact:Mike Pietroniro, President & COO Address: 3421 Industriel Boulevard Laval, Québec H7L 4S3, Canada Phone: 1-450-663-8122 Fax: 1-450-663-6797 Email: [email protected] Website: www.tramac.com

ltramaC equipment ltd.



Rector Machine Works Ltd. has served Canada and the U.S. for more than 80 years with its quality workmanship and excellent service within the mining, steel, forestry and power-generation industries. Rector’s five divisions cover many services including machining (CNC and manual), welding and fabrication (light, medium, heavy and structural), driveline and balance (manufacture and repair of driveshafts for automotive), offroad (mining), industrial (mills and factories), millwriting (disassemble, rebuild, re-install and commission of any industrial equipment), and hydraulics (manufactures cylinders and rebuilds cylinders, pumps and motors). Rector’s decades of experience give it a competitive advantage in mechanical manufacturing, installation and repairs. Located in Sault Ste. Marie, Rector Machine Works provides an

excellent shipping advantage to and from the United States and across Canada. Rector Machine Works proudly received the 2010 award for Company of The Year by Northern Ontario Business. With its recent $2 million expansion, Rector Machine Works continues to grow!

Contact: Dave Rector Business Development DirectorEmail: [email protected] Herv RectorPresident Email: [email protected] Mark Rector, Operations ManagerEmail: [email protected] Address: 190 Sackville Road Sault Ste. Marie, Ontario P6B 4T6, Canada Phone: 1-705-256-6221 Cell: 1-705-542-9489 Fax: 1-705-256-6503 Website: www.rectormachineworks.com

lreCtor maChine Works ltd.

ltega industries Canada inC.

Tega Industries Canada Inc., an ISO 9002 certified company, specializes in designing, manufacturing, and supplying solutions for wear and separation of ores in the mining, mineral processing, material handling and aggregate industries. Tega is a total solution provider for wear and abrasion problems. The products include Rubber/PM mill linings for AG, SAG, primary, secondary, rod, ball and pebble grind mills; screen media made of rubber and polyurethane; wear pads for chutes, bins, hoppers and other transfer and loading points; spillage control systems for conveyors; wear components for conveyors like slider bars and beds, pulley lagging, belt scrapers, idlers and pulleys; and hydrocyclones for mineral separation.

Tega’s expertise lies in assessing the problem, designing an effective system, recommending a solution and monitoring performance to improve the efficiency of its installed products. Tega has its products installed in more than 60 countries with sales offices in 12 of them.

Contact: Vinay Grover, General Manager Canada and Latin America Address: Unit 11305 Kelly Lake Road Sudbury, OntarioP3E 5P5 CanadaPhone: 1-705-523-4158Toll Free: 1-866-864-8342Fax: 1-705-523-8647Fax Toll Free: 1-877-923-8647Email: [email protected] Website: www.tegaindustries.com



Titan Process Equipment Ltd. has been providing quality new and reconditioned equipment to the mining industry since 1999. Titan’s management team has more than 35 years of experience in the manufacturing, refurbishing and designing of mineral processing equipment. It supports a team for customer service, not just sales. Titan’s engineering/management

team devotes a high percentage of time and personal attention to orders and to engineering equipment to meet clients' specific applications rather than selling standardized products, which may or may not be suitable for each customer. Through its close affiliation with other manufacturers, Titan is able to offer a complete line of equipment from laboratory to production. Titan’s

services include new equipment, remanufactured equipment, custom equipment, modular mills and portable equipment. Titan is a customer-oriented company, committed to being a reliable supplier of quality equipment and to building close, long-term relationships with all its clients.

Contact: Brian Burrows, President Email: [email protected]: Suite 401 2186 Mountain Grove Avenue Burlington, OntarioL7P 4X4 CanadaPhone: 1-905-331-2910Fax: 1-905-331-2895Email: [email protected] Website: www.titanprocess.com

ltitan proCess equipment ltd.

lWestpro maChinery inC.

Westpro Machinery – technology delivered for more than 28 years. Its ongoing research and development allow for customers from around the world to benefit from the latest technology in every customized product. Its highly skilled engineering department, consisting of engineers in mineral processing, mechanical, electrical and structural, has developed a complete line of mineral processing machinery such as agglomerators, attrition scrubbers, clarifiers, flotation

machines, grinding mills, lime-slaking systems, rotary dryers, thickeners, and turnkey systems. Its products have been installed globally in countries such as Spain, Bolivia, Peru, Guyana, Chile, Mexico, Guatemala, Africa, Nigeria, Siberia, Indonesia, Philippines, Canada, and the United States. Westpro’s commitment to excellence has established it as a leading name in the mining and aggregate industry allowing its multilingual sales team and engineers to facilitate customer

satisfaction and offer exceptional service every time. Contáctenos, para nosotros será un placer servirle.

Contact: John AtkinsonPresident James BoklaVP OperationsPhone: 1-905-795-8577Email: [email protected] Address: P.O. Box 726 Vernon, British Columbia V1T 6N6, Canada Phone: 1-250-549-6710 Fax: 1-250-549-6735 Email: [email protected] Website: www.westpromachinery.com


Mineral Processing – Pumps, Pipes and Valves

KPM Ltd. serves the mining industry with superior products that reduce the operating costs for handling abrasive materials. KPM’s ability to supply complete slurry handling and dewatering systems sets it apart. KPM products include rare earth magnetic couplings for torque and speed control, slurry pumps and vertical turbine pumps, long-life ceramic linings, which extend service life and give predictable service cycling, improving reliability and availability. KPM SuperSleeves™ provide shaft protection and Zirmax ceramics provide superior wear for specific sites within pump casings and side plates. Each application is assessed and a suggested solution is backed by performance improvement guarantees. The ability to tailor a solution to your specific problem has made KPM the choice of many of North America’s largest mineral processing plants. KPM-lined pumps, pipes, valves, feed chutes and elbows significantly reduce maintenance and down-time costs for

lkpm ltd.

Abrasive pumping at half the cost

Technosub: There are many pump companies, but very few understand the mining industry and the many challenges facing a mine when it comes to pumping applications. Delivery delays are also one of the most important factors a mine will take into consideration. Technosub understands these needs. Over the past 30 years, more than 70% of all mining companies in Canada have put their trust in Technosub because they know they can rely on its expertise to cope with the challenges that arise from dewatering. It’s how Technosub has made its name, by providing reliable engineering dewatering solutions and “turn-key”

projects to the mines. As the sole Canadian distributor for the famous Tsurumi submersible pumps, Technosub manufactures Technojet high-pressure multistage pumps and VT-SS vertical turbine pumps along with its complete selection of pumps specifically made for the mining industry. In addition to offering effective mining pumps and dewatering solutions, Technosub provides the fastest repair service and equipment delivery in the industry.

Contact:Eric Beaupre, Sales ManagerAddress: 1156, av. Lariviere Rouyn-Noranda, QuébecJ9X 4K8, CanadaPhone: 1-819-797-3300Toll Free: 1-866-797-3300Fax: 1-819-797-3060Email: [email protected] Website: www.technosub.net

lteChnosub

mineral processors. KPM also offers complete, skid-mounted pump and filtration packages.

See Country Interests Section for Asia-Pacific and North America.

Contact:Eric Dean International Sales Manager Address: 1860 Kelly Douglas Road Kamloops, British ColumbiaV2C 5S5, CanadaPhone: 1-250-828-8708Fax: 1-250-372-9800Email: [email protected] Website: www.pumpwear.com


Mineral Processing Services

COREM is the largest organization in Canada totally devoted to mineral processing Research and Development. Recognized as a world-class organization, COREM provides a wide range of mineral processing and analytical services to companies that explore and develop ore bodies, transform or recycle mineral substances. Its highly qualified staff of more than 140 employees is able to carry out the most complex research projects, complete flow-sheet development, pilot testing and ore characterization for its members and all mining companies worldwide. Fields of expertise include comminution, physical separation, flotation, extractive metallurgy,

pelletizing, thermal processes and mineralogy. COREM’s pilot plant is unique in Canada for its size and diversity of equipment. Its analysis and characterization laboratories have an impressive range of instruments (MLA, ICP, XRD, XRF, SEM, etc.). COREM is also an international leader in the development of iron-ore products and processes including beneficiation, pelletizing and characterization. Please check COREM’s website for more details.

Contact: Patrick Bernier Address: 1180, rue de la Minéralogie Québec, Québec G1N 1X7, Canada Phone: 1-418-527-8211, ext. 247 Fax: 1-418-527-4818 Email: [email protected] Website: www.corem.qc.ca

lCoremResearch center with unequalled expertise in ore beneficiation processes


The process plant at Detour Gold’s Detour Lake Mine, near Cochrane, Ontario, Canada, will be amongst the largest gold mining operations in North America.


Mineral Processing Services

MineSense™ Technologies is a technology development and marketing company for the mining industry that offers a ground-breaking range of real-time online mineral telemetry and ore upgrading solutions. These items are complemented by a growing range of resource business optimization software products including PreCalulatOre™ and VIASIM®. Its technologies include high-frequency electromagnetics (HFEMS) for nickel-copper sulphides as well as high-speed X-ray fluorescence (HSXRF) and laser-induced breakdown spectroscopy (LIBS) for other ores such as nickel laterites and porphyries. Products like

ShovelSense™, BeltSense™ and SortOre are integrated with material handling elements such as shovels, scoops and belt conveyors to form a high-capacity, mineral-sensing and ore-upgrading solution for large-scale, low-grade mines. Implementation of the MineSense™ solution improves

ore/waste classification and overall metal recovery while simultaneously reducing energy consumption and operating costs. MineSense™ can help make deposits profitable, extend mine life and increase revenues, while improving environmental performance.

Contact: Andrew Bamber, CEO Email: [email protected]: 202-930 Harbourside Drive North Vancouver, British Columbia V7P 3S7, Canada Phone: 1-604-987-9999 Fax: 1-604-738-9050 Email: [email protected] Website: www.minesense.com

Pultrusion Technique Inc.’s bus-bar insulators have a reputation that is unmatched in hydrometallurgy and its latest patents make it possible to operate entire electrowinning or electrorefining processing plants without short circuits. Research in the design of capping boards and contact system calculations has been integrated and synchronized to create entire sections of refineries that are devoid of even the possibility of short

circuits. Pultrusion’s insulators are the perfect choice for metal refining due to the quality of materials, structural design, chemical composition and the low-maintenance use. Pultrusion Technique Inc. is an industry leader in innovation and product safety. Pultrusion is committed to delivering expected results in a timely manner, and its track record shows the company is reliable, flexible, and adaptable to new situations.

Contact: Robert Dufresne President Christine Anctil Administrative Assistant Address: 1830 Marie-Victorin St-Bruno, Québec J3V 6B9, Canada Phone: 1-450-653-1731 Fax: 1-450-653-8478 Email: [email protected] Website: www.pultrusiontech.com

lpultrusion teChnique inC.

DRA Americas Inc. is a subsidiary of an international full-service engineering company that provides services from conceptual studies to mining, mineral processing and infrastructure design and engineering. DRA has a client-centred flexible approach and adapts its services to suit your needs – exactly: the company believes that it is not about DRA, it’s about you. DRA knows that time and money matter to you and that every hour that you are not producing is an hour in which you are not generating profits. DRA is totally focused on project delivery that is high quality, on

time and on budget. It also believes less is more and keeps its teams small and lean but makes sure they are staffed with the best possible people for the job. For your project, you can count on

DRA to dedicate a focused team of experienced engineers who will cost you less and get your product to market faster.

Contact:Wray CarvelasPresident & CEO Address: Suite 30044 Victoria Street, Toronto, OntarioM5C 1Y2, CanadaPhone: 1-416-800-8797Fax: 1-647-977-9065Email: [email protected]: www.draa.ca

ldra ameriCas inC.

lminesense™ teChnologies ltd.


Mining Engineering & Contracting

DMC Mining Services is one of North America’s premier mining contractors. With one of the lowest incident/accident frequency rates in the industry, DMC has been called upon by many leading mining companies to fill critical roles in their success. For more than 30 years, the company has delivered a comprehensive list of mining services, ranging from shaft sinking and raise boring to full mine development and operation. DMC’s extensive mining services have been successfully applied

at large-scale mining sites for gold, nickel, copper, potash, zinc and other metals and minerals. DMC’s dedicated team of professional engineers, miners and support staff is ready to tackle your challenges.

Contact:John Marrington Senior VP & General Manager Address: Suite 200 9555 Yonge Street Richmond Hill, OntarioL4C 9M5, CanadaPhone: 1-905-780-1980, ext. 366Toll Free: 1-800-892-8293Email: [email protected] Website: www.dmcmining.com

ldmC mining serviCes

Hatch is an employee-owned, multidisciplinary professional services firm that delivers a comprehensive array of technical and strategic services, including consulting, information technology, engineering, process development, and project and construction management to the mining, metallurgical, energy, and infrastructure sectors. Hatch has served clients for more than 80 years and has project experience in over 150 countries around the world. With more than 11,000 people in over 65 offices, the firm has more than $35 billion in projects currently under management. Clients recognize Hatch for its ability to bridge the gaps

between research and innovative technologies, and between engineering and reliable operations. Hatch is particularly known for working with senior client management to develop business strategies; managing and optimizing production; executing projects that involve the scale-up of process technologies; and managing startups, commissioning and ramp-ups. Hatch delivers unprecedented business results for its clients through a commitment to quality, lower operating costs, more efficient

utilization of capital assets, higher standards for safety and risk management, faster startups and continuous performance improvements in all projects and programs.

Contact: Eugene Iacob Phone: 1-905-403-3837 Email: [email protected] KwakPhone: 1-905-491-7005Email: [email protected] Address: 2800 Speakman Drive Mississauga, Ontario L5K 2R7, Canada Website: www.hatch.ca

lhatCh


tax policy

The Canadian mining industry supports the federal government’s reduction of the federal corporate tax rate to 15%. A recent report from the University of Calgary School of Public Policy suggests that Canada has the lowest corporate tax rates in the G7, thus increasing Canada’s global attractiveness as a business destination.




Mining Instrumentation

After a blast a geologist at Detour Gold’s Detour Lake Mine, Ontario, Canada, uses a detector to find the blast movement monitors that were installed in dedicated holes. They transmit data back to the detector for interpretation of the blast results.

Since 1979, Marland Enterprises Inc. of Ladner, B.C., has designed and manufactured fast payback visible alignment lasers and related instruments for world underground hard rock mining, tunneling and machine alignment applications. Its product line includes rugged, versatile “mine-lasers” (for long

distance tunnel alignment, including raises – spot diameter 16 cm. at 1,000 m.); “drill-lasers” (dual diode lasers for short distance machine alignment for all makes of diamond drills and ITH/longhole-blasthole drills); “layout-lasers” (dual diode lasers on a 360º adjustable protractor with 1º increments for fast, accurate

marking of diamond drill holes and blast hole rings on stope walls); and “sharp-survey” system (swivel hanger and rod prism). Additional surveying tools and instruments are in the conceptual stage. Solve your alignment problems with Marland Alignment Lasers.


Contact:Chris ArmstrongPresident Address: P.O. Box 100, Station Main Ladner, British Columbia V4K 3N5, Canada Phone: 1-604-946-5890 Fax: 1-604-940-3377 Email: [email protected]: www.marlandlasers.com

lmarland enterprises inC.



Geosight Inc. offers cavity monitoring systems to help you scan, monitor, and map inaccessible areas. Geosight’s CMS are the first that are truly wireless. Its robust design is sealed against water and dust and operates from -30C to +60C. Included is easy-to-use software compatible with Windows XP, 7 or Windows Mobile. Users can set the Laser for either dusty or humid conditions. Two- or three-point resection will correctly reference your CMS in local space. A reliable design allows users to calibrate their own CMS, and users can connect using WiFi or cable. Geosight CMS work with Ore Pass Monitoring, Shaft Monitoring and, of course, Stope and

Void Monitoring applications. What’s more, GeoSight CMS can be lowered down a pass more than 500 m vertically (using the cable) or, with the buggy system, down inclines. GeoSight is proud of its high level of service and support. For more information, please contact Geosight Inc.

Contact: John Lupton, President Address: 452 Simcoe Street North Oshawa, Ontario L1G 4T6, Canada Phone: 1-905-436-6528 Fax: 1-905-436-6247 Email: [email protected] Website: www.geosight.ca

lgeosight inC.

Rapiscan Systems is a manufacturer and supplier of a conveyor tramp metal detector Metcorr 117C and the Satmagan 135 magnetic analyzer. The Metcorr 117C metal detector is able to detect both ferrous and non-ferrous metals over a wide spectrum of applications from mines to wood-chip conveyors. The two-channel method employed by the Metcorr 117C ensures a uniform response from rod- or bar-shaped objects irrespective of their orientation. The Metcorr 117C can also be used on conveyors with steel corded belts. The Satmagan 135 magnetic

analyzer is an ideal instrument for analyzing mixtures of magnetic and non-magnetic components. Accurate analysis of ferro-magnetic compounds of iron such as magnetite is extremely difficult and time-consuming by chemical methods. The measuring time of the Satmagan 135 is roughly one minute with an accuracy of 0.4% (can be as good as 0.1%).

Contact:Robert Hamilton, Sales DirectorAddress: 16 Rocklea Drive Port Melbourne Victoria 3207, AustraliaPhone: +61 3 9929 4600Fax: +61 3 9929 6455Email: [email protected] Website: www.rapiscansystems.com/en/products/industrial_mining

lrapisCan systems

you can source online for almost any product, service or technology used in mining and supplied by Camese members.

www.camese.org



Optech is widely recognized in the mining and exploration communities for its technological depth in terrestrial lidar and related technologies including recent advances in automated landslide detection. Optech’s tripod-mounted ILRIS Terrestrial Laser Scanner, with a 10-kHz data acquisition rate and a range of more than 3km, is especially useful in open-pit mines where accurate ranging, robust field performance and portability are crucial. Developed for underground mining environments, Optech’s Cavity Monitoring System (CMS) quickly collects thousands of accurately located points that are used to determine a cavity’s size,

orientation and volume, and to create detailed 3D CAD drawings. Optech’s Lynx Mobile Solutions have also proven effective in mining applications. Mounted on a moving vehicle, it collects geo-referenced data sets in a fraction of the time required by traditional surveying methods. Optech’s hardware delivers dense, accurate, and geo-referenced spatial data that will exceed your expectations – backed by industry-leading global 24/7 support.

Contact: Ray Charron Regional Sales ManagerProcess Products Eastern North America and Europe Address: 300 Interchange Way Vaughan, Ontario L4K 5Z8, Canada Phone: 1-905-660-0808 Fax: 1-905-660-0829 Email: [email protected] Website: www.optech.com

lopteCh inCorporated

RST Instruments Ltd. offers a wide range of instruments for the geotechnical, mining and environmental engineering fields on a global scale. These instruments are generally related to the measurement and monitoring of soil, rock, and/or groundwater. RST’s products include borehole packers, inclinometer systems and inclinometer casing, extensometers, tilt meters, strain gauges, pressure cells, load cells, data loggers, groundwater monitoring systems and other specialized instruments. RST takes much pride in its ability to provide custom-engineered solutions to site-specific problems. Committed to quality and satisfaction, the RST Instruments Ltd. management system is certified ISO 9001. In business since 1977,

RST has a proven track record for quality, long-term stability and product reliability, and its 40,000 sq.-ft. modern facility incorporates CAD, CAM, and CNC manufacturing techniques. Such techniques assure high quality at a reasonable cost, with timely delivery. RST Instruments Ltd. is dedicated to offering exceptional geotechnical instruments with unmatched technical support and engineering experience.

Contact:Pierre Choquet Vice President Sales Email: [email protected] Address: 11545 Kingston Street Maple Ridge, British Columbia V2X 0Z5, Canada Phone: 1-604-540-1100 Fax: 1-604-540-1005 Email: [email protected] Website: www.rstinstruments.com

lrst instruments ltd.

go online for updates to Camese’s trade shoW Calendar.

www.camese.org


Established in 2010, North American Crating Inc. brings together an experienced and qualified team to serve any packaging and crating requisite for the safe transport of your products. Whether overweight

or delicate, out-of-gauge or small, North American Crating can handle all types of cargo by using a vast range of preservation packaging options that best suit your needs and budget. The company’s facility is set

up for all types of containerization including loading, blocking of flat racks as well as standard sea containers. Its mobile pack crews are also equipped to work at any off-site facility of your choosing. In addition, North American Crating offers project management of large project packaging including inventory, warehousing, computer-load plans and manifests. North American Crating is here to serve you 24/7 and looks forward to earning your trust and confidence.

Contact: Edward Perdue Address: Unit 2, 3983 Nashua Drive Mississauga, Ontario L4V 1P3, Canada Phone: 1-905-405-8885 Fax: 1-905-405-8866 Email: [email protected] Website: www.nacicanada.com

lnorth ameriCan Crating inC.


Sight Power Inc. is a leading provider of data-modeling systems and technology solutions for the mining as well as oil and gas industries. The company specializes in the design, assembly and application of unique computer and information technology (C&I) equipment based on both static and mobile laser-scanning technology. The flagship product - Mobile Shaft Scanning System (MS3) – is designed for the automated inspection and monitoring of operational shafts. MS3 can bring immediate benefits to underground mining operations such as

increased hoisting time, improved quality of shaft inspection, decreased time spent by mine personnel in dangerous conditions, and real-time information for management decisions. Sight Power has best-in-class, data-mining technology for spatial data, which allows effective indexing and compression, spatial object recognition and spatial scene reconstruction. Other areas of expertise include the transformation of raw visual data (e.g.

points clouds, video and photo images) into CAD models (vectorized 3D-objects) as well as information support for mine-shaft design, sinking and equipping.

Contact: Dr. Borys Vorobyov CEO and CTO Address: 3049 Apple Hill Drive Ottawa, Ontario, K1T 3Y8, Canada Phone: 1-613-793-5010 Fax: 1-613-739-9062 Email: [email protected] Website: www.sight-power.com

lsight poWer inC.

Packaging Services


Packaging Services

Emballages Montreal Express Inc. (E.M.E.) specializes in export packaging, flatbed transport and storage. Serving Montreal and Québec, E.M.E.’s facility has a 40-ton overhead crane and several forklift trucks with lifting capacity up to 33,000 lbs. This allows E.M.E to handle heavy weight and/or over-dimensional cargo. In particular, E.M.E. fabricates custom-built crates from the relatively small up to break-bulk crates the size of a modest house. Its services can include vacuum packing with dessicants for anti-rust

control as well as shrink wrapping, blocking and bracing of various types of ocean containers including flatracks and open-tops in addition to the standard 20-ft. and 40-ft. containers. In Montreal, customers can rent space in E.M.E.’s 35,000-sq.ft. warehouse for project work and warehousing of high-value product or they have the option to use sections of its 150,000-sq.ft. outdoor storage yard. For easy turnkey solutions, you can rely on E.M.E.’s experience, knowledge and training to meet and surpass your requirements.

Contact: Carl McManus PresidentEmail: [email protected] Kathleen Lemarche Packaging ConsultantEmail: [email protected]: 135 rue. Belanger Chateauguay, Québec J6J 4Z2, Canada Phone: 1-450-691-4600 Fax: 1-450-691-1290 Website: www.emeinc.ca

lemballage montreal express inC.

Established in 1981, Topax Export Packaging Systems is the professional choice for export packaging and asset preservation for long-term storage. The company’s Protektite brand carries a full line of VCI anti-corrosion products, MIL-PRF-131K sealable, foil-film and reusable fastener systems. VCI products preserve machinery for

future use and ensure it is ready for operation effectively eliminating downtime. Protektite foil-film has superior sealing properties and produces less waste. The company’s high-quality reusable fasteners and foil film are proudly made in North America. Topax manufactures a wide range of custom boxes, crates, cases, saddles, cribbing and dunnage for all modes of transport, and all products are available with full service. Trained professionals provide custom design, logistics, containerization as well as a full range of export packaging and asset preservation. The work can be done in Topax’s heavy-lift factory or at the customer’s facility. Customers trust Topax with high quality packaging and asset preservation products and services. The Topax motto is, “If you can build it, we can pack it.”

Contact: Bruce Hill Email: [email protected] Simon Trillwood Email: [email protected] Address: 380 Spinnaker Way Concord, Ontario L4K 4W1, Canada Phone: 1-905-669-6464 Fax: 1-905-669-6366 Website: www.topax.comEmail: [email protected] Email: [email protected] Website: www.topax.com

ltopax export paCkaging systems

www.camese.orgfeaturing information about more than 300 Canadian mining suppliers.


Radio Frequency Identification

INNOVATING SAFETY. POWERING PRODUCTIVITY.

IS NOWPART OF

PB00

5

lpbe (pyott boone eleCtroniCs Canada ltd.)

Formerly Mine Radio Systems (MRS)Established in 1971, the mission of the PBE Group has always been to design and build reliable technology solutions for mines, tunnels and quarries to improve safety and productivity. PBE’s philosophy of quality, research and practical industry knowledge remain the key ingredients to the continued success of the company. The PBE MineBoss™ centralized monitoring system is currently operating at more than 300 sites. In addition, products from PBE’s conveyor monitoring and controls, underground-communication infrastructure, surface-communication solutions, fixed-gas monitoring, atmospheric monitoring, fire deluge, dust suppression and paging telephone lines are also installed in over 1,000

operations worldwide. In April 2012, PBE acquired Minecom, an Australian manufacturer of underground communications equipment, followed by the acquisition of Mine Radio Systems (MRS) in January 2013. This provides PBE with the most extensive product portfolio in communications and safety systems globally.

See Country Interests Section for Asia-Pacific, Europe, Latin America and the Caribbean, Middle East and North Africa, North America, Sub-Saharan Africa and Worldwide.

Contact: Cindy Chesney General Manager, Latin AmericaEmail: [email protected] Mirza Kozarcanin, Vice President SalesEmail: [email protected] Mary Whitt, Marketing Coordinator Email: [email protected] Address: 394 Highway 47 Goodwood, Ontario, L0C 1A0, Canada Phone: 1-905-640-1839 Fax: 1-905-640-1649 Email: [email protected] Website: www.pbegrp.com


The value of Canada’s mineral production rose sharply in 2011 (by 21%), reaching $50.3 billion.



Safety & Health

Alliance Mercantile (1958) Inc., a leader in rubber safety footwear, 100% waterproof outerwear and work gloves, markets under its Viking trade name throughout North America. Viking ’49er’ Mining Boots are handmade of natural rubber that meet or exceed CSA, ANSI and CE standards. Formulated to resist ozone, heat, oil, chemicals and the effect of abrasive environments, the ’49ers’ feature metatarsal protection, steel plate and toes, Omega ESR, and nitrile chemical-resistant soles.

Viking’s 100% waterproof outerwear now includes a comprehensive line of Hi-Vis CSA/ANSI certified vests, and suits. All Viking garments offer liberal fit, durability, and large-size ranges. Viking’s industrial glove category has been expanded with nitrile- and Neoprene-supported gloves up to 18 inches in length in addition to Alliance rubber/synthetic seamless knit gloves, and natural rubber and nitrile palm coatings that provide superior fit, dexterity and breathability.

Contact:Stacey Guo Email: [email protected] HEAD OFFICE Address: 3451 Wayburne Drive Burnaby, British Columbia V5G 3L1, Canada Phone: 1-604-299-3566 Toll Free: 1-800-663-0664 Fax: 1-604-299-3569 Email: [email protected] Website: www.alliancemercantile.com

lallianCe merCantile (1958) inC.

linternational sos

International SOS is the world’s leading provider of medical assistance, international healthcare, security services and outsourced customer care. With more than 20 years of experience, this organization has been helping its clients manage the health and safety risks facing international travelers, expatriates and the global workforce. This includes setting up and managing operations on its clients’ behalf in remote locations. By providing access to its global network of alarm centers and the expertise of its multilingual

staff, International SOS offers potential clients professional, outsourced customer care and value-added services. With more than 12,000 professionals operating in over 70 countries, International SOS serves clients and members across every sector. This organization works in partnership with businesses, governments, not-for-profit organizations and individuals, and currently provides key services to 82% of the Fortune Global 100 companies and 63% of the Fortune Global 500 companies.

Contact: Alex ElsonPresident Address: Suite 700 80 Tiverton Court Markham, OntarioL3R 0G4, CanadaPhone: 1-905-940-5522Fax: 1-905-940-3551Email: [email protected]: www.internationalsos.com

ll.p. royer inC.

L.P. Royer is the “one-stop” supplier for specialized and innovative safety footwear for workers in the mining industry. L.P. Royer is promoting the XPAN sole made of dual density rubber. It is oil and slip-resistant. The XPAN rubber sole protects your feet from heat and extreme cold and offers superior traction and durability. Whether you do open-pit mining or work underground, at the concentrator or the foundry, L.P.

Royer’s mining, Utech chemical-resistant or smelter boots are highly insulated and designed for ultimate performance in the multiple environments of your industry. With L.P. Royer’s wide range of adapted safety footwear protection including internal and external metatarsal protection, you will find the best style for you. L.P. Royer products meet CSA and ASTM quality standards and are certified ISO and C-TPAT.

Contact: Jerry Hould Email: [email protected]: 712, rue Principale Lac-Drolet, QuébecG0Y 1C0, CanadaPhone: 1-819-549-2100Fax: 1-819-549-2584Email: [email protected]: www.lproyer.com


Safety & Health

lnorthern light teChnologies inC. (nlt)Northern Light Technologies Inc. (NLT), founded in 1994, designs and manufactures underground lighting and communications solutions for the mining and tunneling industries. NLT Mining Networks™ offer a holistic approach to underground communications. Based on open standards, NLT uses Wi-Fi protocol and wireless communication technologies to enable a fully connected mine that is safer and more efficient. With manufacturing/assembly locations in Canada, Australia and Chile, the NLT network offers a rich suite of applications including personnel and equipment tracking, two-way voice and text communication, traffic management, atmospheric monitoring, real-time data acquisition

and controls for pumps, fans and other devices. NLT’s offering also includes a Wi-Fi VolP enabled telestrating video camera. Northern Light® cap lamp systems are designed for maximum durability and comfort while offering power take-off, RFID and Wi-Fi tracking options. Included in their lineup are the award-winning Polaris (Mining Magazine “Underground Mining Soft Rock” winner), the lightweight corded Eclipse, and now the new cordless and tag-enabled Genesis. Specialties:

Mining cap lamps, mining networks, voice-over Wi-Fi handset with PTT, Wireless Input Output Device (WIOD), RFID and Wi-Fi tracking, traffic management, environmental monitoring, two-way text messaging in cap lamps, telestrating video with VoIP, and custom software.

Contact: Nataly Carbone Marketing Specialist Email: [email protected]: 33 Laird Drive Toronto, Ontario M4G 3S8, Canada Phone: 1-905-287-3552 Fax: 1-416-425-5960 Fax: 1-905-829-2919 Email: [email protected] Website: www.nltinc.com

Smelting & Refining Equipment & Services

EPCM Services Ltd. has more than 20 years of service in the provision of permanent cathode technology: cathode manufacturing; cathode washing and stripping systems; and robotic

tankhouse handling equipment for modernization and new projects for electrorefining and electrowinning plants. These installations utilize more than 1,000,000 cathodes and produce more than five million tons of copper annually. In 2003, EPCM Services Ltd. inaugurated Tecnologias Cobra S.A., a modern cathode manufacturing facility conveniently located in Antofagasta, Chile, in the heart of the South American copper belt. The plant has manufactured more than

800,000 permanent cathodes for 35 copper producers in over 15 countries. The largest single order was 130,000 for one of the world’s largest refineries.

EPCM’s Technology Group is committed to creating leading-edge designs that complement the mining industry’s objectives for improved quality for less cost. The SP and SPU cathode designs and the robotic stripping system with new cathode wash technology make EPCM your best choice for tankhouse technology.


Contact: John Jickling, Gord Iverson or Robert S. Jickling Address: 2829 Sherwood Heights Drive Oakville, Ontario, L6J 7R7, Canada Phone: 1-905-829-1711 Fax: 1-905-829-1717 Email: [email protected] Website: www.epcm.com

lepCm serviCes ltd.

Your Winning Solution



lheath & sherWood

Heath & Sherwood has been a supplier of quality solutions to the mining industry since 1927. The company is known for close contact with its customers and prides itself on client service that adapts the product line to specific customer needs. Heath & Sherwood supplies the Gaspé Tuyere Puncher, patented Gaspé Tuyere Automation Systems, Tuyere Silencers, patented Tuyere Pyrometer and Tuyere Line Refractory Drill. Used in most copper and nickel smelters, Heath & Sherwood’s smelting equipment helps customers maximize their smelter process with quick payback. These benefits include extended campaign life, increased blowing capacity, enhanced process uniformity and improved working conditions. Headquartered in Kirkland Lake, Ontario, Heath & Sherwood has subsidiary offices in Mississauga, Ontario, and representatives in Brazil, Mexico, Peru, Chile, India, Italy, South Africa and Australia.

Contact:Peter Marinigh Address: P.O. Box 340, Kirkland Lake, OntarioP2N 3J2, CanadaPhone: 1-705-567-5313, ext. 101Toll Free: 1-888-467-2675 1-888-GOSAMPL(E)Fax: 1-705-568-8545Email: [email protected] Email: [email protected] Website: www.heathandsherwood64.com

Kubes Steel Inc. – where metal takes shape. For this company, the tagline says it all. Kubes Steel’s is internationally renowned for its rolling, forming and bending services, depth of experience, infinite capacity for complex fabrications and personal service. Its cooperative relationships with more fabricators and manufacturers than any other fabricator in Canada make it the “Fabricator’s Fabricator.” In 2014, Kubes Steel will celebrate 40 years of service and its 15th anniversary as an ISO quality-registered company. Located in Hamilton, a major steel port and the heart of Canadian steelmaking, Kubes

Steel is 35 minutes from the U.S. border with ready access to highways and rail transport. Kubes Steel works in partnership with Export Development Canada to simplify the process of exporting to anywhere in the world. Kubes Steel offers experienced service, fabrication space in excess of 100,000 sq.ft., bay sizes up to 55' x 600', 80-ton lifting capacity, unparalleled forming capabilities and in-house machining.

Contact: John Rogers Manager, Business Development Address: 930 Arvin AvenueStoney Creek, Ontario L8E 5Y8, Canada Phone: 1-905-643-1229 Fax: 1-905-643-4003 Email: [email protected] Website: www.kubesteel.com

lkubes steel inC.






lmansour mining teChnologies inC.

Website home page tour

With new language capabilities and value-added electronic newsletters, CAMESE provides full comprehensive online services to help you source products or services used in mining today.


Software

For more than 20 years, COGEP has set the benchmark for Computerized Maintenance Management Systems in the mining industry thanks to its powerful, world-class CMMS/EAM and procurement management

software. Guide Ti helps maintenance staff plan and facilitate rapid interventions that prevents equipment failures and downtime. It also aides in organizing and controlling maintenance activities for strategic assets such as mills, mobile and stationary. Guide Ti increases production and equipment reliability, optimizes inventory, shortens delivery periods for parts and lowers transportation costs for remote sites. COGEP’s tools integrate easily into all ERPs (SAP, JD Edwards, Microsoft Dynamics GP, AX and NAV, Oracle, Baan, SAGE/ACCPAC, among others). COGEP’s clients: Alexis Minerals, Aurizon Mines, BlackRock Metals, Canadian Royalties/Jien Canada, Iamgold,

Inmet Mining, Metanor Resources, Mine Arnaud Inc., Metso, Nyrstar (Breakwater Resources Ltd), Osisko Mining, Quinsam Coal, Polaris Minerals, Semafo, ROBEX Resources Inc., Richmont Mines, Forage Orbit Garant, G4 drilling, Procon Mining & Tunnelling and Luna Logistics.

Contact: Eric Van Hove Business Development Address: Suite 400 825 Lebourgneuf Blvd. Québec, Québec, G2J 0B9, Canada Phone: 1-418-626-2503, ext.144 Fax: 1-418-626-3373 Email: [email protected]: www.cogep.com

lCogep inC.


Operators monitor bank of computer screens in the mill control room at North American Palladium’s operation, located in Thunder Bay District, Ontario, Canada.


Software

AssayNet is an information technology company specializing in LIMS (Laboratory Information Management Systems) for minesite labs. AssayNet’s development team has leveraged its experience in mining and minesite assay labs to offer a total solution for managing lab data. AssayNet has built its success on a thorough knowledge of the industry, a high degree of professionalism, and a strong commitment to its clients. AssayNet LIMS is AssayNet’s flagship system. Using server-centric architecture, AssayNet LIMS is robust, scalable, and easy to use. The program offers high-

end features for assay labs such as web access, barcoded sample tracking and integrated QA/QC. AssayNet LIMS offers immediate benefits to laboratories: a centralized system with rapid access to validate data for clients, increased efficiency of lab personnel, the easy-to-use QA/QC program, real-time information to support management decisions, reduced turnaround time and finally, labor-cost savings. AssayNet’s

products and services are multilingual in English, Spanish and French, and programs can be used in different languages concurrently.

Contact:Tania Orduz Marketing & Sales Email: [email protected]: Suite 330 384 Bank Street, Ottawa, Ontario K2P 1Y4, Canada Phone: 1-613-231-8444 Fax: 1-613-231-5552 Email: [email protected] Website: www.assaynet.com

lassaynet Canada inC.

ldassault systèmes geovia inc.GEOVIA, known as Gemcom Software prior to its acquisition in 2012, is now a part of Dassault Systèmes, the 3DEXPERIENCE Company. Dassault Systèmes provides business and people with virtual universes to imagine sustainable innovations. With world-leading solutions that transform the way people work, the group brings value to over 170,000 customers of

all sizes, in all industries, in more than 140 countries. As part of Dassault Systèmes, GEOVIA leads the way in delivering tomorrow’s innovations in modelling and simulation for mining and is home to world-renowned solutions including Surpac, GEMS, Minex, Whittle, MineSched, PCBC, Hub and InSite. For more information, visit www.3ds.com/GEOVIA.

Contact:Patricia Ceron, Marketing ManagerEmail: [email protected]: Suite 1100 1066 West Hastings Street Vancouver, British ColumbiaV6E 3X1, CanadaPhone: 1-604-684-6550, ext. 404457Phone: 1-604-684-6550, ext. 404520Fax: 1-604-602-1201Email: [email protected] Website: www.3ds.com/GEOVIA

Geosoft, founded by geoscientists in 1986, is now a world leader in software and solutions for earth exploration. Geosoft is ranked among Canada’s top 150 technology companies, with more than 5,000 customers in over 100 countries worldwide. By harnessing the power of information for exploration, Geosoft simplifies the life of today’s earth explorer by providing access to data and a powerful set of mapping and analysis tools within a dynamic 3D environment. Process, map, QA and interpret all your data with Geosoft’s advanced earth-mapping software-Oasis montaj.

Visualize and manage your drilling projects with Target. Map and analyze your data within Esri ArcGIS with Geosoft’s Target for ArcGIS and Geochemistry for ArcGIS extensions. Generate 3D models using geophysical inversion techniques with cloud-powered VOXI Earth Modeling. Find, manage and deliver all your historical and active exploration data, and GIS data with Dap server technology.

Contact: Lorraine Godwin Regional Business Director, North America Address: Suite 810, PO Box 131 Queens Quay Terminal 207 Queens Quay West Toronto, Ontario M5J 1A7, Canada Phone: 1-416-369-0111 Fax: 1-416-369-9599 Email: [email protected] Website: www.geosoft.com

lgeosoft inC.


Software

lthreedify inC.

ThreeDify Inc. is an innovative mining software company developing leading-edge 3D software solutions for drill-hole data visualization, geological modelling, and strategic mine planning, which includes open-pit optimization and underground stope optimization. The company is built on a foundation of expertise in the mining industry combined with advanced knowledge of 3D computer graphics, exceptional after services and professional training. ThreeDify’s mission is to empower its clients with the competitive edge for making reliable forecasts and increasing productivity. Complementary to its powerful geological modeling tool (GeoModeler) and highly efficient pit

optimization tool (FlowPit), ThreeDify’s creative Microsoft Excel add-on tool (CoreBlock) features an easy-to-use 3D drill-hole data visualizer and automated ore resource estimator within the Excel interface. This eliminates the need for exporting data to a third party geological modeling package for 3D visualization and preliminary deposit estimation. To learn more about ThreeDify’s products and services, please visit www.threedify.com.

Contact: Nancy Liu VP Operations Address: Suite 1130 2720 Queensview Drive Ottawa, Ontario K2B 1A5, Canada Phone: 1-613-454-5327 Fax: 1-613-691-1503 Email: [email protected] Website: www.threedify.com

The Power of Scalability and Flexibility

®


need for infrastructure investment

The mining industry is the largest customer of Canada’s transportation sector. It is therefore important that the sector move products to market efficiently, at competitive prices and on modern infrastructure such as ports, highways and railways. The federal government’s commitment to enact a rail-freight shipper’s right to a service level agreement (and a commercial dispute resolution mechanism should negotiations break down) is a good example of forward thinking in this regard. Capital spending opens up new regions for development by enhancing the economic viability of a host of projects. The ongoing extension of the Highway 37 transmission line in northeast British Columbia is a good example of long-term strategic infrastructure investment. Notably, this capital cost of $400 million will enhance the economics of an estimated $15 billion in mineral projects.




A tailings dam is being constructed at AuRico Gold’s Young-Davidson Mine located near Matachewan, Ontario, Canada.

Surface Mobile Equipment & Components

ARGO Ontario Drive & Gear Ltd.: Your work demands that you get to remote sites through challenging terrain with your equipment and crew. Performance and time are crucial factors in the success of your operation. Designed for reliability in the toughest conditions imaginable, the amphibious ARGO 8x8 travels through flooded areas, deep mud, across water and over rocks, deep snow and ice. The all-season ARGO 8x8 transports up to six passengers and has the load capacity of up to

2,000 lbs. Designed for surveying, resource exploration, utility maintenance, forestry and the public sector, the versatile ARGO 8x8 can be equipped with optional accessories such as high-performance rubber tracks, a convertible top or a power winch with receiver option. The extreme terrain, top-of-the-line ARGO 8x8 Centaur or XTI/XTD features a quick change platform to mount a flatbed, cargo or utility box, a crane or drill. A heavy duty 8x8 trailer can be added to carry additional equipment such power

packs, tools, compressors and welding equipment. Optional coatings to protect against rust and acids are available. Engineered and produced since 1967, every ARGO is backed by decades of unrivaled experience in the design and manufacturing of off-road vehicles. Today, ARGO is the world’s leading manufacturer of extreme terrain vehicle solutions and innovative off-road platforms.

Contact: Bob Hunter Director International/Canada Sales Address: 220 Bergey Court New Hamburg, Ontario N3A 2J5, Canada Phone: 1-519-662-2840, ext. 211 Toll Free: 1-877-274-6288 Fax: 1-519-662-2421 Email: [email protected] Website: www.argoutv.com

largo ontario drive & gear ltd.



lCWs industries (mfg) Corp.

GLobAL dEMANdS, SMARt SoLutIoNS

Cable reeler systems tire manipulators dozer blades buckets

CWS is an innovator in designing, manufacturing, and commissioning attachments for heavy equipment. Since 1956, global distributors, customers, and OEMs have demanded CWS solutions for rugged applications in the Agriculture, Construction, Forestry, Material Handling, Mining, and Oil & Gas industries. CWS specializes in integrating customer needs with engineered solutions supported with exceptional product support and industry-leading warranty programs. CWS heavy equipment attachments and solutions include tire manipulators, cable reeler systems,

dozer blades, and buckets for excavators and wheel loaders. CWS is a division of the IES family of companies which employs more than 2,800 people and operates 18 manufacturing facilities, serving a wide range of global markets.


Contact: CWS Industries Mfg Corp19490-92nd AvenueSurrey, British Columbia V4N 4G7, CanadaPhone: 1-604-888-9008Toll Free: 1-888-661-9008Fax: 1-604-888-9006Email: [email protected]: www.cwsindustries.com

Division of

lmobile parts inC.

MPI Mobile Parts Inc. has been supplying parts to nearly 30 countries worldwide for more than 30 years. As well as exporting parts globally, MPI has become an innovator in the mining industry. Proudly located in Sudbury, Ontario, the nickel capital of the world, MPI has produced special purpose vehicles – some of the best in the industry. It offers several third-brake options for use on the Toyota Land Cruiser as well as

dozens of inventive ways to extend the life of the unit in harsh underground conditions. As well, MPI has an advanced driveline manufacturing shop that allows it to manufacture custom drive lines and a cutting-edge machine shop for custom parts to meet clients’ needs. MPI’s comprehensive database delivers the part you are looking for, the first time. MPI prides itself on delivering exemplary service and support to all its customers. When

looking for fast and easy service, remember MPI.

Contact:Bob Morin, General ManagerAddress: P.O. Box 327 2472 Evans Road Val Caron, OntarioP3N 1P5, CanadaPhone: 1-705-897-4955Fax: 1-705-897-6209Email: [email protected] Website: www.mobileparts.com



Gridcom Enterprises Ltd. concentrates on building the most complete range of braking resistors for off-road diesel electric mining trucks and LeTourneau electric loaders. Completed braking resistors are always in stock: D model, B model (Poly-Zi), H model, C Model and the newest 33D model. Besides new units, Gridcom also repairs most failed resistors. Qualified technicians test all resistors to meet all OEM requirements. Gridcom also provides individual after-market parts (e.g.

plates, barriers, hardware and resistor elements) for all makes of off-road diesel electric mining trucks, including Euclid, Komatsu (Wabco, Dresser), Unit Rig and others. It is Gridcom’s aim to provide you with the best service and produce high quality products. The Gridcom team closely monitors customers’ requirements and always provides

effective solutions fitting your specific needs, according to your requests regarding technical, financial and qualitative standards.

Contact:Vlasta H. (Steve) Marsik, President Address: Unit B4, 19323 94 Avenue Surrey, British Columbia V4N 4E6, Canada Phone: 1-604-888-1532 Fax: 1-604-888-6066 Email: [email protected] Website: www.gridcom-mining.com

lgridCom enterprises ltd.

Hazeland Manufacturing Inc. is a leading Canadian manufacturer of hydro-excavation, pressure-cleaning and vacuum equipment for mining support services. Hazeland takes pride in manufacturing quality, cost-

lhazeland manufaCturing inC.

effective equipment solutions. The HYDROSPADE product line ranges from small, compact trailers to large trucks. Hazeland provides standard and custom-tailored units to provide multiple use as well as individual

requirements. These units are used in hydro-excavation, visible-locating, spill-cleanup, water-blasting, pressure-washing, debris-vacuuming and sewage-disposal services. With access to a wide range of vacuum blowers and water-pressure pumps along with related components from around the world, Hazeland provides parts and service support as well as refurbishing/rebuild and fabricating services to keep your operations on track. If it can be done, Hazeland will do it.


For the latest developments in mining, review member news online.

www.camese.org



Morgan Industrial Supply Ltd. has been the leading supplier of industrial brakes for the mining and forestry industries in western Canada for more than 70 years. Today, the company is part of the HE PARTS International group of companies and has expanded operations in the oil and gas sector, has opened a location in Texas and expanded to seven locations in the Republic of Chile to service the mining and industrial sectors. Its product offerings have also expanded to include most components from haul trucks and shovels to brake assemblies, clutch assemblies, friction materials, hydraulic pumps and motors, air systems, drive systems and seating. Morgan’s specialty includes rebuild and exchange services for caliber and wet brakes, drive systems,

front and rear suspensions and hydraulics on large-haul trucks and mining shovels. Morgan also has developed unique expertise in the braking systems of this equipment and represents major product lines in brakes, clutches, hydraulics, industrial seating and air systems.

See Country Interests Section for Latin America and the Caribbean.

Contact:Alan Lund Address: 1700 Savage Road Richmond, British Columbia V6V 3A9, Canada Phone: 1-604-249-1120 Fax: 1-604-247-0039 Email: [email protected] Website: www.morgan.ca

lmorgan industrial supply ltd.

Now an HE PARTS company!

Hercules Equipment Ltd., based in Greater Vancouver, British Columbia, has long been internationally recognized as a leader in engineering heavy equipment due to its innovative designs and superb craftsmanship. Hercules Equipment Ltd. is also renowned for tailoring its quality equipment to suit every customer’s needs. The company specializes in tow truck attachments for recovering disabled haulage vehicles and low-bed

mining trailers for transporting drills, shovels, loaders and dozers. Other mining products include cable reel handlers, water trucks, rock spreaders, tire handlers and dump trailers. Backed with quality assurance, customer service and an engineering staff with more than 20 years of experience, Hercules Equipment Ltd. has acquired clientele from across the globe ranging from North America, South America, Asia, and Southeast Asia.

Contact:Peter So, President Address: Unit 201 8988 Fraserton Court Burnaby, British ColumbiaV5J 5H8, CanadaPhone: 1-604-988-9328Fax: 1-604-988-3239Email: [email protected] Website: http://hercules-equipment.com

lherCules equipment ltd.



ORO Design & Manufacturing Ltd. is a Canadian manufacturer specializing in medium- and heavy-duty service trucks engineered to withstand harsh mining and construction applications. ORO offers a full range of field-support equipment including lubrication and fuel vehicles, mechanics and crane trucks, and tire service bodies. ORO’s dedicated engineering staff also allows it to custom build equipment for unique applications in the field. ORO Design prides itself on an unwavering commitment to quality and after-sale service, one that its customers say is

unsurpassed in the industry. Give ORO’s technical sales staff a call today to discuss your service equipment needs and let them help you optimize your service fleet investment.

Contact: Barry Smith, Technical Sales Address: 3 Small Crescent, RR#1 Hawkestone, OntarioL0L 1T0, CanadaPhone: 1-705-327-1567Fax: 1-705-327-1506Email: [email protected]: www.orodesign.ca

loro design & manufaCturing ltd.

Reliable Wheel Products Ltd. provides products used in the maintenance of heavy equipment. SuperLift Jacks are air/hydraulic and electric/hydraulic. All SuperLift Jacks are power-driven and available in 50 to 350 ton models for underground or surface mining equipment. ManLift Work Platforms raise workers to a safe height for installing, cleaning, torquing or removing large diameter tires and wheels. They are equipped with air/impact and air/hydraulic torque guns, high-speed cleaning tools as well as foot controls for easy access to the work area. SuperPress Tire Press Centres are electric/hydraulic presses for OTR tires and will complete any large tire shop’s work center. JackStands support equipment from 50 through 250 tons. With their unique transporter, these designed support stands can be easily placed beneath any piece of heavy mobile equipment. Reliable Wheel Products offers specialized, severe-service wheels and rims from 25-in. to 63-in. diameter

for extreme applications. Torque application and testing equipment as well as used tire-handling equipment are also available.


Contact: Ronald Prior Vice President/SalesEmail: [email protected] Julio Guzman, Sales Manager Mexico and Latin America Email: [email protected] Monte Amyott, VP Cameron Prior Director of Business Development Email: [email protected] Address: HEAD OFFICE Suite 5, 19299 94th Avenue Surrey, British Columbia V4N 4E6, Canada Phone: 1-604-882-8994 Fax: 1-604-357-5100 Email: [email protected] Website: www.reliablewheel.com

lreliable Wheel produCts ltd.



Polar manufactures a diverse selection of HVAC systems for use in the mining industry. Engineered for incredible performance in extreme conditions and built to handle vibration, corrosive atmospheres, dusty work areas, hazardous environments, Polar manufactured products are designed to give the greatest operator comfort and reliability for your environment even if you require an intrinsically safe or explosion-proof system. Polar systems are suitable for all equipment and uses including shovels, dozers, drills, LHD’s, cranes, refuge stations, haul

trucks or excavators. No matter what your application, call Polar or check out Polar’s mining A/C systems at www.polarmobility.com.

Contact: Ian Duiven General Sales Manager Email: [email protected] Address: Bay 11 4041 74th Avenue South East Calgary, Alberta T2C 2H9, Canada Phone: 1-403-279-3633 Toll Free: 1-800-309-8155 Fax: 1-403-236-2759 Email: [email protected] Website: www.polarmobility.com

lpolar mobility researCh ltd.

Rector Machine Works Ltd. has served Canada and the U.S. for more than 80 years with its quality workmanship and excellent service within the mining, steel, forestry and power-generation industries. Rector’s five divisions cover many services including machining (CNC and manual), welding and fabrication (light, medium, heavy and structural), driveline and balance (manufacture and repair of driveshafts for automotive), offroad (mining), industrial (mills and factories), millwriting (disassemble, rebuild, re-install and commission of any industrial equipment), and hydraulics (manufactures cylinders and rebuilds cylinders, pumps and motors). Rector’s decades of experience give it a competitive

advantage in mechanical manufacturing, installation and repairs. Located in Sault Ste. Marie, Rector Machine Works provides an excellent shipping advantage to and from the United States and across Canada. Rector Machine Works proudly received the 2010 award for

Company of The Year by Northern Ontario Business. With its recent $2 million expansion, Rector Machine Works continues to grow!

Contact: Dave Rector Business Development DirectorEmail: [email protected] Herv RectorPresident Email: [email protected] Mark Rector, Operations ManagerEmail: [email protected] Address: 190 Sackville Road Sault Ste. Marie, Ontario P6B 4T6, Canada Phone: 1-705-256-6221 Cell: 1-705-542-9489 Fax: 1-705-256-6503 Website: www.rectormachineworks.com

lreCtor maChine Works ltd.


oil sands

Oil sands investment will generate $2.1 trillion in economic activity across Canada over the next 25 years (2010 to 2035).




RIMEX is the world’s leading custom manufacturer of wheels and rims for all mining and industrial applications. Renowned in the industry for developing the Machined Extreme Service (MES) and Taper Secure Radial (TSR) series of wheels, RIMEX products are machined for true roundness and have more than 100% more steel in critical areas across the rim for extended service life. The DGS and IGLR are position-sensitive wheels that allow for easy tire removal from all wheel

positions on a truck or loader. This results in dramatic time and cost savings, as well as improved safety for site personnel. In addition to wheels and rims, RIMEX offers a full range of complementary products that help save time and money while improving worksite safety: ◆ TyreSense – industry leading tire pressure monitoring system (www.tyresense.com); ◆

Mobile Press – portable tire press; ◆

Beadbreakers – safest in the industry; and ◆ Defuzer Valve – RIMEX-designed air-pressure relief valve.

Contact: Tyler JamesEmail: [email protected] Address: 9726 186th Street Surrey, British Columbia V4N 3N7, Canada Phone: 1-604-888-0025 Fax: 1-604-888-7642 Email: [email protected] Website: www.rimex.com

lrimex supply ltd.

Valley Blades Limited, ISO 9001:2008 certified, manufactures replacement wearing edges for earth and snow removal equipment including bulldozers, road graders, loaders, scrapers, excavators, and snow plows. These wearing edges are manufactured using computer-assisted technology to rigid specifications that meet or exceed those set by the original equipment manufacturer. Since it began in the early 1960s, Valley Blades Limited has grown into a world supplier of

replacement wearing edges and has built a strong dealer network that supplies competitively priced, quality products and reliable service backed by an extensive inventory. Valley Blades Limited manufactures replacement wearing edges for Caterpillar, Komatsu, Deere, Case, Terex, Volvo and more, and has manufacturing facilities located in Waterloo, Ontario, and Edmonton, Alberta, to serve the mining industry nationwide and customers around the world.

Contact:Randy Sauer, Sales Manager Email: [email protected] Address: 435 Phillip Street Waterloo, Ontario N2J 3Z9, Canada Phone: 1-519-885-5500 Toll Free: 1-800-461-1824 Fax: 1-519-746-2780 Email: [email protected] Website: www.valleyblades.com

lvalley blades limited

lveyanCe teChnologies Canada, inC.

Veyance Technologies Canada, Inc. is the exclusive manufacturer of Goodyear Engineered Products. Three of the ways Veyance Technologies can accelerate your business is through good people, innovative technologies, and smart solutions. Together, these strengths drive the development of Goodyear Engineered Products’ complete family of products: industrial and hydraulic hose and fittings,

automotive and commercial truck, conveyor belt, power transmission, home and garden, rubber track and original equipment parts. Backed by Veyance Technologies’ best-in-class distributor network, you benefit from innovative market-driven products that boost efficiency, but also from generations of industry experience that combine to keep your profit potential high and your operating costs low.

Contact: Brad BaberAddress: 237 Brunel Road Mississauga, OntarioL4Z 1X3, CanadaPhone: 1-905-366-2010Email: [email protected] Website:www.goodyearep.com



Vintech Ltd. is an ISO 9001 certified company that provides products and services to the mining industry. It supplies parts for heavy surface-mining equipment, mineral processing reagents, flocculants and QA/QC services. Vintech Ltd.’s products include brake assemblies, shafts, pinions, snubbers, rollers, carbon brushes, hydraulic valves as well as additional parts for mining shovels, drills, dozers and excavators. Vintech’s disc-brake assemblies, hubs, clutches, snubbers and linings for various mining shovels and haul trucks meet or exceed OEM specifications, are competitively priced and supplied within short lead

times. Vintech offers custom-made flotation reagents for bauxite, iron, zinc and other mineral ores for the removal of silica, phosphate, alumina, sulphur and other impurities. All of Vintech’s flotation reagents are tailor-made for specific customer applications to ensure optimal mineral recovery. Vintech provides

professional QA/QC services including expediting and third-party inspections to clients worldwide.


Contact: Sheldon Perry Address: Unit 2 20 Regan Road Brampton, Ontario L7A 1C3, Canada Phone: 1-905-840-3482 Fax: 1-905-840-0852 Email: [email protected] Website: www.vintechltd.com

lvinteCh ltd.


nuclear energy projections

Canada, notably Saskatchewan, is a major player in the world uranium industry. The McArthur River mine in Northern Saskatchewan is the world’s largest and highest-grade uranium deposit, with an average ore grade of 21% and annual production of around 8,200 tonnes of uranium oxide. A positive outlook in world uranium demand is reinforced by concern over air pollution, greenhouse gas emissions associated with fossil-fuel combustion, and energy security – this bodes well for Canada’s prominence in this mining sector.




A Hercules aircraft is unloaded at Agnico Eagle’s Meadowbank Mine airport, located 70 kilometers north of Baker Lake, Nunavut, Canada.

Transportation & Logistics Service Providers

Bellville Rodair International (BRI) is a Canadian-owned, international freight forwarder with 22 offices in 12 countries that is focused on delivering specialized services worldwide. Its project offices across North America specialize in handling out-of-gauge, heavyweight cargo between major

mining sites as well as oil and gas fields. Over the years, building reliability has driven the company’s success. By implementing best practices in communications and services, BRI goes beyond the traditional movement of goods from A to B. Instead, BRI learns the

complete business of its customers so it can offer innovative logistics solutions that are tailored to give them a competitive edge. With this partnership attitude, the company builds reliability into all that it does for its customers, suppliers and employees.

lBellville RodaiR inteRnational (BRi)

Contact: Bellville Rodair International VancouverJeff Haley Regional Manager – Western Canada Address: Unit 228 21300 Gordon Way Richmond, British Columbia V6Y 1M2, CanadaPhone: 1-604-244-5940Fax: 1-604-277-2301Email: [email protected]: www.bellvillerodair.com

Contact: Bellville Rodair International Head OfficeRobert Kwiatkowski Director Business Development Mining Address: 350 Pendant Drive Mississauga, Ontario, L5T 2W6, CanadaMobile: 1-647- 282-3097Phone: 1-905-671-4655 Toll Free: 1-888-206-4406 Fax: 1-905-671-4414Email: [email protected]: www.bellvillerodair.com



Cole International Inc. (CII) is one of Canada’s largest, privately-owned international freight forwarding, customs brokerage and logistics service providers. Headquartered in Calgary-the centre of Canada’s oil and gas region-and with several offices across the country, CII has a long history of meeting and exceeding the requirements of the resource-based industrial sector. CII recognizes the rigorous demands of delivering critical components to remote locations while navigating through complex foreign customs regulations. CII’s experts have the technical knowledge, the language

skills and the business tools to ensure that your exports are handled smoothly, efficiently and accurately every time. As a Canadian company successfully competing in the global marketplace, CII understands many of the obstacles faced by CAMESE members. CII is uniquely equipped to provide you with the specialized logistics solutions that will help you compete more successfully to achieve your goals.

Contact:Derrick Sones, Director – Freight Email: [email protected] Address: 3033-34th Avenue Calgary, Alberta T1Y 6X2, Canada Phone: 1-403-262-2771 Direct: 1-403-219-2261 Cell: 1-403-512-9211 Toll Free: 1-800-268-2965 Fax: 1-403-262-7301 Website: www.cole.ca

lCole inteRnational inC.

eastContact:Mario Mastropasqua Branch Manager – Freight Address: Suite 201 670 Orly Avenue, Dorval, QuébecH9P 1E9, CanadaPhone: 1-514-631-2653Fax: 1-514-631-6116

CentRalContact:Atul RoyBranch Manager – FreightAddress: Suite 223, The Airway Centre5955 Airport Road, Mississauga, OntarioL4V 1R9, CanadaPhone: 1-905-672-6255Fax: 1-905-672-0244

WestContact:Dan ForanBranch Manager – FreightAddress: Suite 116, 5000 Miller RoadRichmond, British ColumbiaV7B 1K6, Canada Phone: 1-604-273-5161Fax: 1-604-273-2053

Axxess International Inc. is an international freight forwarder and customs broker. With emerging markets and increased worldwide demand for mineral resources, Axxess International has set up the best practices and the most reliable partnerships to meet your transportation mining logistics requirements. This includes reliable, cost-effective solutions for transportation of site materials and uniquely shaped mining equipment including heavy-lift and oversized cargo, police escort arrangements or liaisons with public works and other authorities. The company offers all its clients personalized service according to the criteria you set. For Axxess, any

remote location is AXXESSIBLE. Its team of logistics professionals respects your schedules and projected costs while managing and supervising the whole process of transporting mining cargo to your jobsites. With no multiple hub transfers, Axxess further achieve timely, efficient delivery of your cargo by participating in the C-TPAT (Custom-Trade Partnership

Against Terrorism), ACE (Automated Commercial Environment) and FAST (Free and secure trade at the border). For more specific information about their unique services, visit the company’s website below.

Contact: Vagn Greve Danielsen Address: Suite 725 276 St-Jacques Ouest Montreal, Québec H2Y 1N3, Canada Phone: 1-514-849-9377 Fax: 1-514-849-9428 Email: [email protected] Website: www.axxessintl.com

laxxess inteRnational inC.



Branson International Incorporated is a Canadian – owned International Freight Forwarder providing specialized supply-chain solutions and logistics. Be it a small package or heavy, out-of-gauge cargo, Branson has a solution for any piece regardless of weight or size. Branson is an independent international forwarder that offers customers flexible transportation solutions for time-sensitive project cargo and international shipping for the mining industry. With its 24/7, personalized service and hands-on local support, Branson gives you that competitive edge to ACT LOCAL AND SHIP GLOBAL. Its

highly motivated team of International Specialists provides start-to-finish support when shipping air, ocean and/or locally. Branson prides itself in understanding your needs and offers the best possible options to give you a competitive advantage in the marketplace. When it comes to shipping, choose Branson and you can trust the job will get done!

Contact: Rod Morgan Sales Manager Address: 3133 Orlando Drive Mississauga, Ontario L4V 1C5, Canada Phone: 1-905-672-1000 Mobile 1-647-280-2295 Toll Free: 1-866-291-2585 Fax: 1-905-672-6000 Email: [email protected] Website: www.shipbranson.com

lBRanson inteRnational inCoRpoRated

DHL is the global market leader in the logistics industry and “The logistics company for the world.” DHL commits its expertise in international express, air and ocean freight, road and rail transportation, contract logistics and international mail services to its customers. A global network composed of more than 220 countries and territories and about 275,000 employees worldwide offers customers superior service quality and local knowledge to satisfy their supply chain requirements.

DHL accepts its social responsibility by supporting climate protection, disaster management and education. DHL is part of Deutsche Post DHL. The group generated revenue of more than €51 billion in 2010. For more information: www.dhl-dgf.com.

Contact: Tina Tassone Address: 555 Montee de Liesse St-Laurent, QuébecH4T 1P5, CanadaPhone: 1-514-734-4518Fax: 1-514-344-4516Email: [email protected] Website: www.dhl-dgf.com/about/canada_profile.html

ldHl GloBal FoRWaRdinG (Canada) inC.


transportation of mining products

Canada’s logistics supply chain is critical to the flow of mined and refined products to both domestic and international markets. By some measures, the mining industry is the largest customer by industry for Canada’s transportation sector, providing it with considerable tonnage, especially in select bulk commodities such as iron ore, coal, potash and sulphur.




ITN Logistics Group is Canadian-based provider of export and import transportation and logistics with worldwide connections and a unique focus on the mining industry. With more than 160 experienced personnel in Canada, ITN coordinates shipments of mining equipment between Canada and more than 100 countries some of which are in the most remote regions of the world. ITN is designed to fit the unique needs of the mining industry and offers a complete array of transportation solutions including: airfreight, LCL, FCL, RO-RO and break-bulk sea freight, export packing, heavy lifts, over-dimensional transportation, vessel and aircraft charter, insurance and customs

clearance. ITN also operates more than 150,000 sq.ft. of warehouse space and dedicates greater than 50,000 sq.ft. of specially equipped storage space to 3PL management of mining equipment inventory for the domestic and international markets. ITN is large enough to handle all your global logistics needs and small enough to care about every single shipment.

Contact:Mark Marot VP Sales and Marketing Email: [email protected] Basel Soujah Project ManagerEmail: [email protected]: Toronto International HQ 6975 Pacific Circle Mississauga, Ontario L5T 2H3, Canada Phone: 1-905-362-1111Fax: 1-905-362-1110 Website: www.itn-logistics.com

litn loGistiCs GRoup

The Manitoulin Group of Companies is Canada’s leading transportation and logistics solutions provider, with more than 44 years in the mining industry. As a single-source provider, Manitoulin offers a wide array of global services that includes: expedited LTL/TL, intermodal, logistics, international freight forwarding, warehousing, customs brokerage and supply-chain management. Manitoulin leverages from its extensive network to deliver these services to major rural and urban areas. In North America alone, Manitoulin’s distribution coverage consists of more than 60 Canadian

terminals and 250 U.S. Service Centres. From small to large logistics programs, rest assured that Manitoulin has the right locations, right resources and the right knowledge to fulfill your shipping requirements. For more information, visit www.manitoulingroup.com.


Contact:Terry Daly, Director of SalesAddress: 7035 Ordan Drive Mississauga, OntarioL5T 1T1, CanadaPhone: 1-905-670-8990Customer Service: 1-800-265-1485Fax: 1-905-670-8960Email: [email protected] Website: www.manitoulingroup.com

lmanitoulin GRoup oF Companies

prospecting for more export Business? Join Camese.Use association leverage to boost your sales power. Find out how to become a member at www.camese.org.


Transportation Equipment, Accessories & Services

Ecofab Maintenance Ltd. designs, manufactures and services fiberglass railcar covers to contain and protect bulk commodities shipped in open-top railcars. Rigid, easily removable Ecofab railcar covers convert open-top gondolas or hoppers into wind and moisture-proof containers. As a service contractor protecting bulk commodities in transit, Ecofab offers a comprehensive service package including railcar covers, cover maintenance, cover handling, cover safety and fleet management in order to maximize efficiency in the movement of bulk materials. Servicing

the mining industry for nearly 40 years by protecting bulk materials in transit, and currently logging millions of covered railcar miles every month, the Ecofab Railcar Cover System has

a proven record of reliability and safety. Secure your concentrates from losses and/or deterioration with Ecofab’s efficient, cost-effective system.

Contact: Doug BockEmail: [email protected]: 1645 Lonsdale Avenue North Vancouver, British Columbia V7M 2J5, Canada Toll Free: 1-800-222-3130 Fax: 1-604-903-2025 Email: [email protected] Website: www.ecofab.com

leCoFaB maintenanCe ltd.




lmeCaniCad inC.


transportation of mining products

As the largest shipper by both freight revenue and volume shipped, the mining industry is the Canadian rail system’s most significant customer. In 2011, shipments of coal and processed minerals represented 54% of total Canadian rail-freight revenue.



Underground Vehicles, Equipment & Components


A miner is drilling at the face at IAMGOLD’s Chester Lake Property near Gogama, Ontario, Canada.

BTI (Breaker Technology Ltd.) has been innovating custom-engineered rock-breaking solutions since 1958. Whether it’s for construction, aggregate or mining applications, BTI has developed a system to surpass your needs. BTI is Taking Reach to the eXtreme with its new TRX Series Rockbreaker System, representing its 2,000th Boom System produced – a clear milestone in BTI’s commitment to providing the best in rockbreaking boom system technology. BTI also produces a full line of rugged, low-profile, underground utility vehicles including mobile scalers, scissors lifts, crane trucks, lube trucks, anfo loaders, shotcrete mixers and placers, cassette systems, APV – all purpose vehicles and personnel vehicles. Well recognized as a leader in global mining and quarry markets, BTI offers unparalleled experience and product support through its network of strategically located international distributors. When your jobs become bigger and results become tougher to achieve, rely on BTI to continue to exceed your needs.

Contact:Terry McKague Canadian Director of Sales Phone: 1-519-599-2015 Fax: 1-519-599-6803 Email: [email protected] Website: www.RockBreaker.com

Contact: Jim Brown Vice President of Sales, International & U.S. Phone: 1- 519-599-2015 Fax: 1-519-599-6803 Email: [email protected] Website: www.RockBreaker.com

Contact: Michael McFarthing Marketing Manager Address: 35 Elgin Street North P.O. Box 130 Thornbury, OntarioN0H 2P0, CanadaPhone: 1-519-599-2015Fax: 1-519-599-6803Email: [email protected]: www.RockBreaker.com

lBti (BReakeR teCHnoloGy ltd.)

tRx – taking Reach to the extreme



Arkbro Industries has been servicing world markets since 1967 and is a leading designer, manufacturer and supplier of pneumatic (ABI-5A/AA), electric (ABI-5E/EE) and diesel-driven (ABI-5D/DD) raise climbers. Raise climbers are used for underground horizontal drift and tunnels, vertical- and inclined-shaft drilling to enlarge pilot raises for ventilation shafts, transport shafts and production mining (long-hole drilling) of narrow ore veins or wide ore bodies. Arkbro Industries acquired the raise climber business and raising methods produced by Sweden’s Alimak Hek

Group. Having Alimak’s systems and know-how propels Arkbro to the top of world-class manufacturing technologies and produces solutions that will improve your working conditions, safety, speed and accuracy in raise mining at any site anywhere in the world.

See Country Interests Section for Asia-Pacific, Latin America and the Caribbean, Middle East and North Africa, North America and Sub-Saharan Africa.

Contact:Mohammed Alwazani Address: Suite 1 889 Pantera Drive Mississauga, Ontario L4W 2R9, Canada Phone: 1-905-602-9291, ext. 1 Fax: 1-905-602-9296Email: [email protected] Website: www.arkbro.com

laRkBRo industRies

DUX Machinery Corporation is a privately owned Canadian manufacturer and supplier of heavy-duty underground equipment designed

ldux maCHineRy CoRpoRation

DUX SI – SL6000 Scissor Lift Truck

to meet the needs of mining and tunneling projects worldwide. With more than 40 years’ experience, DUX offers a full range of products including articulated haulage trucks (dump, teledump and ejector), LHDs, scalers, remix trucks, multi-purpose cassette systems, boom trucks and scissor lifts. All DUX products come with on-site commissioning by

factory technicians, intensive training for operators and maintenance personnel, as well as fast parts service and technical backup through a worldwide network of distributors.

Contact: Hermann BumuellerPresident Address: 615, rue Lavoisier Repentigny, Québec, J6A 7N2, CanadaPhone: 1-450-581-8341Fax: 1-450-581-5138Email: [email protected] Website: www.duxmachinery.com

Since 1959, L&M Powertrain Parts has set the standard for performance and quality in powertrain parts and components for off-road vehicles and has become one of the leading suppliers to the mining industry worldwide. L&M specializes in supplying transmission, torque converter, differential and planetary axle parts for dealers, distributors

and re-builders servicing machines such as Atlas Copco, Dux, Eimco, Jarvis-Clark, GHH, JCI, MTI, Sandvik, Tamrock, Toro, Volvo and Wagner.

Contact:Tony Mainelli Address: 201 Snidercroft Road Concord, OntarioL4K 2J9, CanadaPhone: 1-905-669-2292Toll Free: 1-800-387-3765Fax: 1-905-669-6319Email: [email protected]: www.lmpowertrainparts.com

ll&m poWeRtRain paRts



BPT Components & Parts Inc. is a leader in the Clark Powertrain market. With a state-of-the-art dyno-test machine to ensure its products meet or exceed OEM standards, BPT inventories more than $5 million in Clark/Dana Powertrain components and replacement parts for the mining, logging and construction industries. BPT is also a Carraro warehouse distributor. Now BPT can provide you with more lines to help keep your machines running with OEM parts at

competitive prices. BPT will keep equipment operating with the highest quality parts and components at exceptional savings for the customer.

Contact:Tim Edwards Address: 430 Westmount Avenue P.O. Bag 4100 Sudbury, Ontario P3A 5Y9, Canada Phone: 1-705-524-8400 Fax: 1-705-524-8422 Email: [email protected] Website: www.bpt.on.ca

lBpt Components & paRts inC.

Relationships are critical when doing business overseas. Go there and build new bridges with Camese’s help!



Gladiator Equipment Inc. is a privately owned Canadian company that provides underground mining equipment and services as well as a full range of heavy equipment and support services for surface, open-pit mines and the Alberta Oil Sands. Gladiator also sells and services additional equipment required for pipeline, oilfield and general construction. Gladiator’s team of professionals specializes in providing exceptional service and high-quality equipment, parts and components. Gladiator Equipment Inc. prides itself on the importance of industry

knowledge and experience. It offers a full range of products and services that provide solutions to the rigorous mining applications commonly encountered in the Canadian mining industry. Having built this company on a foundation of hard work and first-class service, Gladiator’s team of professionals looks forward to meeting the ever-changing challenges that continue to present themselves throughout the mining industry.

Contact: Stephen McNeilPresidentAddress: 6603 44 Street Leduc, AlbertaT9E 7E5, CanadaPhone: 1-780-980-7555Fax: 1-780-986-7051Email: [email protected] Website: www.gladiatorequipment.com

lGladiatoR equipment inC.

Hazeland Manufacturing Inc. is a leading Canadian manufacturer of hydro-excavation, pressure-cleaning and vacuum equipment for mining support services. Hazeland takes

lHazeland manuFaCtuRinG inC.

pride in manufacturing quality, cost-effective equipment solutions. The HYDROSPADE product line ranges from small, compact trailers to large trucks. Hazeland provides standard

and custom-tailored units to provide multiple use as well as individual requirements. These units are used in hydro-excavation, visible-locating, spill-cleanup, water-blasting, pressure-washing, debris-vacuuming and sewage-disposal services. With access to a wide range of vacuum blowers and water-pressure pumps along with related components from around the world, Hazeland provides parts and service support as well as refurbishing/rebuild and fabricating services to keep your operations on track. If it can be done, Hazeland will do it.




Marcotte Mining Machinery Services Inc. is the OEM of the original Minejack® Carrier-the base design used by most utility equipment suppliers. Marcotte’s 4,000-lb. and 6,000-lb. scissor lifts are the longest lasting units in the market today with the lowest operating cost per hour. Units are fully tested and certified to all load,

stability, safety and industry requirements. Marcotte Mining Machinery Services knows the harsh environments that their units are expected to perform in and designs them to meet these conditions. With 34 years of supply and service experience in the mining industry, Marcotte is confident they are manufacturing the strongest, most

reliable carrier and offers a 10-YEAR WARRANTY on frame weldments. Your input for specific applications is a welcome challenge for Marcotte to design, develop and deliver new products. Marcotte’s ability to create well-designed, one-of-a-kind units puts them at the forefront of today’s mining industry.

Contact:Dennis Rienguette General Manager Email: [email protected]: 2291 Lasalle Boulevard Sudbury, Ontario P3A 2A9, Canada Phone: 1-705-566-5030 Toll Free: 1-800-461-5955 Fax: 1-705-566-5657For information on our equipment line Email: [email protected]: www.marcottemining.com

lmaRCotte mininG maCHineRy seRviCes inC.

Industrial Fabrication Inc. designs and manufactures multipurpose utility vehicles that will improve safety and productivity while also reducing operating costs. With a modular frame and heavy-duty industrial components, the MINECAT UT99 is built with the same design philosophy that makes the MINECAT MC100 a popular vehicle in underground mines. The MINECAT UT 99C truck is built using the same design philosophy

that makes the MINECAT MC 100 tractor a popular vehicle in underground mines thanks to its modular frame design fitted with heavy-duty industrial components. MINECAT purpose-built utility vehicles are designed to be completely configurable to your particular needs. When moving people or materials underground, let the MINECAT line of utility vehicles move you. Whether its service vehicles, forklifts, emulsion loaders, anfo loaders, shotcreters, scissor lifts, utility trucks, personnel

carriers, aerial booms or any other configuration you may require, Industrial Fabrication has the product. Industrial Fabrication continues to grow by helping miners find innovative solutions to their specific problems through the use of cost-effective utility vehicles. For more information, visit www.minecat.com or email [email protected].

Contact: Marcel Demers Sales ManagerAddress: 240 Fielding RoadLively, Ontario P3Y 1L6, Canada Phone: 1-705-523-1621 Fax: 1-705-523-0565 Email: [email protected] Website: www.minecat.com

lindustRial FaBRiCation inC.



MacLean Engineering is engaged in the design and manufacture of specialized underground mobile mining equipment. Mining Division head office and primary manufacturing facilities are in Collingwood, Ontario, Canada. The company provides its customers with practical and innovative solutions for underground tunneling and mining operations through a comprehensive line of mobile support and service vehicles. MacLean Engineering’s equipment line-up includes: Ground Support (platform and utility bolters, shotcrete sprayers and transmixers); Mine-Mate™ Utility Vehicles (scissor lifts, boom trucks, ANFO/emulsion chargers, personnel carriers, fuel/lube/tanker trucks, cassette systems); Mine-Mate™ EWP attachments (fan and pipe handlers, cable reeler, service drill, grout pump, ANFO charger);

Ore Flow Control systems to reduce oversize material in stopes, draw points and ore passes (remote operated drills, mobile rock breakers and water canons). A major focus of the company is in after-market support and service. MacLean Engineering has established a network of sales and support locations throughout Canada and in the United States, Australia, South Africa and Latin America.

Contact: MacLean Engineering Equipment Sales & Product Support Address: 1067 Kelly Lake Road Sudbury, Ontario P3E 5P5, Canada Toll Free: 1-866-856-3626 Email: [email protected] Website: www.macleanengineering.com

lmaClean enGineeRinG

MPI Mobile Parts Inc. has been supplying parts to nearly 30 countries worldwide for more than 30 years. As well as exporting parts globally, MPI has become an innovator in the mining industry. Proudly located in Sudbury, Ontario, the nickel capital of the world, MPI has produced special purpose vehicles – some of the best in the industry. It offers several third-brake options for use on the Toyota Land Cruiser as well as dozens of inventive ways to extend

the life of the unit in harsh underground conditions. As well, MPI has an advanced driveline manufacturing shop that allows it to manufacture custom drive lines and a cutting-edge machine shop for custom parts to meet clients’ needs. MPI’s comprehensive database delivers the part you are looking for, the first time. MPI prides itself on delivering exemplary service and support to all its customers. When looking for fast and easy service, remember MPI.

Contact:Bob Morin, General ManagerAddress: P.O. Box 327 2472 Evans Road Val Caron, OntarioP3N 1P5, CanadaPhone: 1-705-897-4955Fax: 1-705-897-6209Email: [email protected] Website: www.mobileparts.com

lmoBile paRts inC.



Miller Technology Inc. is a family-owned and operated business since 1979. The Miller team designs and manufactures mobile equipment that supports the specific safety and productivity goals of clients as demanding as the global mining industry. Working closely with the end user to select available options and/or develop specific solutions to meet end-user requirements, Miller Technology offers products that are designed and built for underground applications including the Toyota Landcruiser personnel carrier; the Miller Truck personnel carrier; Triple 4ce multi-functional utility carrier, scissorlift, aerial boom, work platform;

Cable reel handling; Compact road grader; Anfo loader, forklift, tele-handler; and Cable/Anfo hose inserter and torque test bench. The mission of Miller Technology is to develop product that meets your increasing needs for improved safety, productivity and utilization while at the same time lowering your total operating costs through your global base of mining operations.

Contact: Chad Miller, VP Operations Address: 175 Eloy Road North Bay, Ontario P1B 9T9, Canada Phone: 1-705-476-4500 Fax: 1-705-476-8811 Email: [email protected] Website: www.millertechnology.com

lmilleR teCHnoloGy inC.

RDH Mining Equipment has been providing quality underground mobile mining and tunneling equipment for more than 28 years. Its product line includes, but is not limited to, jumbo drill rigs, LHD’s underground loaders, scissor lifts, flatbed boom trucks, fuel and lube trucks, bolting jumbos, underground trucks, narrow-vein and custom equipment, used equipment, and parts. From specifically designed pieces to remanufactured equipment, RDH in-house engineers keep their product at the cutting edge of the industry. Each unit is built for its individual clients and their working environments – custom concepts and solutions meet their exact needs. The

RDH Philosophy: “Whether you own a single machine or a fleet of our equipment, the complete satisfaction of each and every customer is our goal.” RDH currently has dealers in Africa, Chile, Costa Rica, Mexico, Peru and Russia CIS and is always looking for other competent regional dealers.

Contact: Kevin Fitzsimmons, President Address: 904 Hwy 64 Alban, Ontario P0M 1A0, Canada Phone: 1-705-857-2154 Fax: 1-705-857-3285 Email: [email protected] Website: www.rdhminingequipment.com

lRdH mininG equipment

Camese connects buyers to sellers in your global marketplace at

www.camese.org



Nelmaco Eastern Ltd. is the OEM (Original Equipment Manufacturer) of all JOY Canadian air and electric slusher scrapers. Nelmaco also manufactures parts for both Canadian and American made JOY slushers. All JOY units and parts are made to JOY’s original specifications. Nelmaco provides all the accessories required to work with JOY units. These items include scrapers, air motors, throttle valves, sheave blocks and non-rotating wire rope. Nelmaco also specializes in repairing, rebuilding and servicing all makes and models of slushers, tuggers, hoists and winches. Rentals of slusher units are available. Nelmaco stocks full-sized portable toilets and hand carry units, along with many

sanitation supplies. In addition, Nelmaco provides maintenance for mine ventilation fans and supplies parts for these units. Nelmaco continues to expand their capabilities in rebuilding and repairing smaller mining equipment, giving better serviceability and the best quality to their customers. Nelmaco provides their services on a global scale.

Contact: Fred Delabbio, P.Eng. Address: 2355 Lasalle Blvd Sudbury, Ontario P3A 2A9, Canada Phone: 1-705-560-3705 Fax: 1-705-560-6983 Email: [email protected]: www.nelmaco.com

lnelmaCo easteRn ltd.

Nordic Minesteel Technologies (NMT) brings together the combined innovative solutions of both Nordic Mine Technology Inc. and Minesteel Fabricators Limited. Both Nordic and Minesteel have been ISO 9001 certified. Together, NMT has extensive experience in the design and manufacture of mining related equipment and structures. Consequently, NMT products are designed and built to meet the specific needs of each client as well as all industry standards. Its highly skilled team incorporates the latest technology and innovative designs into all products resulting in long-

term value for clients. Worldwide clientele have also relied on NMT to provide lasting, cost-effective solutions for their mining-related requirements in equipment, service and consulting. NMT’s capabilities include in-house design, engineering, fabrication and installation of continuous loading and unloading rail-haulage systems, loading chutes, unloading stations,

head frames and structures, shaft steel, loading pockets, conveyances, consulting services and more.

Contact: Ronald P. ElliottPresident Barry HoganInside Sales Address: 4530 Highway 11 North R.R. #2, Box 6670 North Bay, Ontario P1B 8G3, Canada Phone: 1-705-474-8037 Fax: 1-705-474-5083 Email: [email protected] Website: www.nordicminesteel.com

lnoRdiC minesteel teCHnoloGies (nmt) Excellence that goes Deeper

prospecting for more export Business? Join Camese. Find out how to become a member at

www.camese.org.



Polar manufactures a diverse selection of HVAC systems for use in the mining industry. Engineered for incredible performance in extreme conditions and built to handle vibration, corrosive atmospheres, dusty work areas, hazardous environments, Polar manufactured products are designed to give the greatest operator comfort and reliability for your environment even if you require an intrinsically safe or explosion-proof system. Polar systems are suitable for all equipment and uses including shovels, dozers, drills, LHD’s, cranes, refuge stations, haul

trucks or excavators. No matter what your application, call Polar or check out Polar’s mining A/C systems at www.polarmobility.com.

Contact: Ian Duiven General Sales Manager Email: [email protected] Address: Bay 11 4041 74th Avenue South East Calgary, Alberta T2C 2H9, Canada Phone: 1-403-279-3633 Toll Free: 1-800-309-8155 Fax: 1-403-236-2759 Email: [email protected] Website: www.polarmobility.com

lpolaR moBility ReseaRCH ltd.

Wabi Iron & Steel – Mine Equipment Division: Specializes in underground mining conveyance and loading systems. Wabi custom-designs, engineers and manufactures a wide range of equipment specifically developed for the mining industry.

lWaBi iRon & steel CoRp.

Mecanicad manufactures ventilation ducts, hoppers, chutes, fences and liners out of plastic plates and pipes. Various sizes and types are used depending on their final use. Mecanicad’s development team has leveraged its experience in mine and smelter sites to offer solutions that improve your operation’s efficiency. As a result, Mecanicad has developed a unique way of installing slick plastic linings in hoppers and silos to reduce production downtime with a new type of underground rigid plastic duct system

called Mecanivent®. Mecanivent® reduces transport, handling and repair costs as well as saves thousands of dollars in energy requirements for all installations. Currently, Mecanicad is working on new products to reduce mining-operation costs, which in turn improve your return on investment. Call Mecanicad for more information or visit its website listed at right.


lmeCaniCad inC.

ContactJeremy Birnie General Manager Address: 330 Broadwood Avenue P.O. Box 1510New Liskeard, Ontario, P0J 1P0, Canada Phone: 1-705-647-4383 Mobile: 1-416-427-7556 Fax: 1-705-647-6954 Email: [email protected] Website: www.wabicorp.com

Foundry Division: Specializes in heat, corrosion and abrasion-resistant iron and steel castings, using a mix of alloys including Ni-Hard, high-chromium iron, manganese steel, grey and ductile iron, carbon steel, low-alloy steel and stainless steel.


Analytical Laboratories and SuppliesVentilation Equipment & Components

ABC Ventilation Systems has been the world’s leading supplier of flexible ventilation ducting to underground mining and tunneling customers for more than 36 years. ABC’s manufacturing process is registered to the ISO 9001 Quality Assurance standard. ABC tests and documents its manufacturing process from the production of coated fabrics to the high-frequency welding of ducting. ABC maintains control of raw materials and finished products in its state-of-the-art facility. ABC offers high-strength, cost-effective, positive MineVent flexible ventilation ducting in sizes ranging from 300 mm to 3,000 mm and section lengths up to 500 m. ABC also offers spiral wire-reinforced MineDuct for negative

pressure applications and oval TwinDuct, which allows for 20% more head room over equivalent round diameters. ABC has a complete ventilation system including ducting, fans, cassettes and ventilation design. ABC’s engineers can customize ventilation systems to fit your needs. With reference projects in more than 30 countries, ABC has the experience, quality, and expertise needed in the most demanding of environments.

Contact: Gary ThorinsonSales Manager Address: 1802 Quebec Avenue Saskatoon, Saskatchewan S7K 1W2, Canada Phone: 1-306-653-4303 Fax: 1-306-653-3890 Email: [email protected] Website: www.abcventilation.com

laBC ventilation systems

Accutron Instruments Inc. was established in 1994 and is now a leading manufacturer of mine and industrial ventilation monitoring technology. Its cutting-edge ultrasonic technology has proven to be the most effective and reliable method of continuously monitoring airflow in difficult mining and industrial applications. Using specific designs for mine drifts/tunnels, mine surface fans, mine booster fans and many industrial applications, Accutron covers all your airflow monitoring needs. These non-obstructive, virtually maintenance-free monitors are the basis for today’s ‘Vent-on-Demand’ solutions and save millions of dollars annually in mines around the world. Accutron also offers complete air-quality monitoring solutions. The MAQS (Mine Air Quality Station) is an inexpensive, plug-and-play

monitoring station with customized process variables (gas, temp, humidity, etc.) and multiple communication options. Other products include industrial laser rangefinders and recently ‘Intrinsically Safe-Approved’ airflow monitors. Accutron’s continued commitment to research and development ensures innovative products for today’s growing mining and industrial markets.

Contact: Derek Cummings Technical Services Manager Jamie R. Valade Sales Manager Address: Unit B 11 Mary Street Sudbury, Ontario P3C 1B4, Canada Phone: 1-705-682-0814 Fax: 1-705-682-2215 Email: [email protected] Website: www.accutroninstruments.com

laCCutRon instRuments inC.


Analytical Laboratories and SuppliesVentilation Equipment & Components

Rocvent Inc. is a global manufacturer/supplier of ventilation ducts and fans, with a full line of accessories. Rocvent has been serving the industry for more than 30 years. A full line of ventilation ducting (both positive and negative pressure types), fans and silencers (20-in. to 120-in. diameter) for 50 and 60 Hz system-design capabilities based on supplied parameters are also available. The ducting is especially designed for rough, hostile underground mining

lRoCvent inC.



Contact: Roger Coutu VP Global SalesEmail: [email protected] Address: P.O. Box 640 2502 Elm StreetSudbury, Ontario P3E 4P8, Canada Phone: 1-705-682-0671 Fax: 1-705-682-4658 Email: [email protected] Website: www.mansourmining.com

lmansouR mininG teCHnoloGies inC.

and tunneling environments as well as for the use of advanced radio-frequency welding techniques (RF) to ensure consistently strong welds on tubes in diameters from 1 to 10 feet (0.3 m to 3.1 m) custom lengths in addition to special ‘inhouse-designed’ suspension and Snap-Roc couplings, or zipper joint, velcro connections. Rocvent also manufactures inflatable head covers. This safety product has protected miners from loose, falling ore in passes and raises for nearly 20

years. The Rocvent team has earned its reputation as “manufacturers of the highest quality products at competitive prices.”

Contact: Bernt Ivarsson Address: P.O. Box 1120 Copper Cliff, Ontario, P0M 1N0, Canada Phone: 1-705-692-5854 Fax: 1-705-692-9044 Email: [email protected] Website: www.rocvent.com




lmeCaniCad inC.


Ventilation Equipment & Components

Water Treatment Equipment & Services

Maestro Mine Ventilation provides ventilation solutions to improve underground work environments and extend miners’ lives while also allowing companies to increase production, conserve energy and reduce greenhouse gases. Maestro has collaborated with some of the largest global mining companies and mine research centers to understand the key requirements for this specialized field. Maestro is a benefit to people responsible for mine ventilation, management and automation who are concerned with worker health and safety, productivity and energy savings. Maestro’s vision is to become the

main facilitator of automated mine ventilation systems by providing advanced instrumentation for measurement and control. If you want to reduce your power consumption and costs for top quality air systems in your mining operations, you need to contact Maestro Mine Ventilation.

Contact: Michael Gribbons VP, Sales & Marketing Address: 1305 Kelly Lake Road Sudbury, OntarioP3E 5P5, CanadaPhone: 1-705-805-6918Fax: 1-705-222-6290Email: [email protected]: www.maestroventilation.com

lmaestRo mine ventilation

IC Controls manufactures quality water-analysis equipment that is used to actively manage risk in mines, mills, metallurgical refineries and wastewater applications producing advanced operating efficiencies as well as improved safety. The Model 642 pH sensor is a proven product and the company’s bestseller. Customers find it easy to install and maintain, and it exceeds their expectations for longevity. IC Controls products are known for performance in floatation, conditioners, gutters, sluiceways, effluent streams and ponds. With a strong customer base in Canada and a growing reputation throughout the world, its product line has evolved to offer analyzers and configurable sensors in the areas of pH, conductivity, ORP, dissolved oxygen, chlorine, and boiler analysis. As demand for the world’s mineral

resources grows, there’s increasing pressure on the critical habitats vital to food production and freshwater availability. IC Controls provides the necessary water-analysis equipment to maximize the positive effects of mining operations in response to these issues.

Contact:Rosalie Fitzpatrick Address: 29 Centennial Road Orangeville, Ontario L9W 1R1, Canada Phone: 1-519-941-8161 Fax: 1-519-941-8164 Email: [email protected] Website: www.iccontrols.com

liC ContRols


CAMESE’s Country Interests ServiceVentilation Equipment & Components

CAMESE’s Country Interests

main World trading Regions in alphabetical orderTo find CAMESE members, who have representation in other parts of the world, please

browse through the following World Trading Regions and go to the page where their profile is listed. Some members have elected to present blocks of information, while a

few have gone with one or two lines under their company name and page number.

ASIA-PACIfICPBE (was Mine Radio Systems) . . . . . 27, 110

for information on services in this region for the PBE Group, please go to:www.pbegrp.com

laustraliaKPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 101

PBE (was Mine Radio Systems) . . . . . 27, 110for information on services in this regionfor the PBE Group, please go to:www.pbegrp.com

lBangladesh

lBrunei darussalam

lCambodia

lChinaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lHong kong, saR Arkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lindiaHepburn Engineering Inc. . . . . . . . . . . . . 24, 78

lindonesiaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

Hepburn Engineering Inc. . . . . . . . . . . . . 24, 78

lJapan

lkorea, RepublicHepburn Engineering Inc. . . . . . . . . . . . . 24, 78

lmalaysia

lnew zealand

lpakistanArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lphilippinesArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lsingapore

lsri lanka

ltaiwanHepburn Engineering Inc. . . . . . . . . . . . . 24, 78

lthailand

lvietnam

EUroPEPBE (was Mine Radio Systems) . . . . . 27, 110

for information on services in this regionfor the PBE Group, please go to:www.pbegrp.com

laustria

lBelgium

lBulgaria

lCroatia

lCyprus

lCzech Republic

ldenmark

lFinland

lFrance

lGermany

lGreece

lHungary

liceland

lireland

litaly

lkazakhstan

llatvia

lnetherlands

lnorway

lpolandCanadian Wear Technologies Ltd. . . . . 33, 91

lportugal

lRomania

lRussia

lserbia

lslovak Republic

lspain

lsweden

lswitzerland

lturkey

lukraine

lunited kingdom

LATIn AMErICA AnD ThE CArIBBEAnPBE (was Mine Radio Systems) . . . . . 27, 110


largentinaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

Canadian Wear Technologies Ltd . . . . . 33, 91

Hepburn Engineering Inc. . . . . . . . . . . . 24, 78

lBarbados

lBrazilCanadian Wear Technologies Ltd . . . . . 33, 91


Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

lChileArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

Canadian Wear Technologies Ltd. . . . . 33, 91


Morgan Industrial Supply Ltd. . . . . . . . . . . .121Contact: Alfonso TeplizkyAddress: Cobija 372, Barrio IndustrialP.o. Box 360, Antofogasta, ChilePhone: +1-56-55-234803fax: +1-56-55-290512Email: [email protected]: Supplies industrial brakes

Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

lColombia

lCosta Rica

lCuba

ldominican Republic

lecuador

lel salvador

lGuatemala

lGuyana

lHaiti

lJamaica

lpanama


CAMESE’s Country Interests Service

LATIn AMErICA AnD ThE CArIBBEAn (continued)lperuArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132



Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

ltrinidad and tobago

luruguay

lvenezuela

MIDDLE EAST AnD norTh AfrICAPBE (was Mine Radio Systems) . . . . . 27, 110


lalgeria

legypt

liranArkbro Industries . . . . . . . . . . . . . . . . . . 59, 132

lisrael

lJordan

lkuwait

llebanon

llibya

lmoroccoArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lsaudi arabia

lsyria

ltunisia

lunited arab emiratesabu dhabidubai

lWest Bank and Gaza strip

norTh AMErICAPBE (was Mine Radio Systems) . . . . . 27, 110


lmexicoArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132



Rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

lunited statesArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132



KPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 101

SUB-SAhArAn AfrICAPBE (was Mine Radio Systems) . . . . . 27, 110


lBurkina Faso

lCameroon

lCôte d’ivoire

lethiopia

lGhanaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lkenya

lmali

lmozambique

lnigeria

lsenegal

lsouth africaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

ltanzaniaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lzambiaArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

lzimbabweArkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

PLUS GEnErAL CATEGorYlWorldwideActivation Labs . . . . . . . . . . . . . . . . . . . . . . . . . .18

Actlabs has full service labs in Perth,Australia; Georgetown, Guyana; Coquimbo, Chile; Zacatecas, Mexico; nuuk, Greenland; Tumeremo, Venezuela; Medellin, Columbia; Windhoek, namibia; ougadougu, Burkina faso and Ulaan Baatar, Mongolia. Sample preparation is also available in Antofagasta, Chile and Chihuahua, Mexico.

Arkbro Industries . . . . . . . . . . . . . . . . . . . 59, 132

CWS Industries (Mfg.) Corp . . . . . . . . . . . .119

EPCM Services Limited . . . . . . . . . . . . IFC, 112representative: John Jickling, VPPhone: 1-905-829-1711, ext. 202fax: 1-905-829-1717Email: [email protected]: Supplies base metal refining equipment and technology

Foremost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Email: [email protected]: Exploration drills, mining tools


Manitoulin Group of Companies . . . . . . . . 129Services: Manitoulin completes your globalsupply-chain requirements

Marland Enterprises Inc. . . . . . . . . . . . . . . . 105Ships to all parts of the world

MAXIDRILL Inc. . . . . . . . . . . . . . . . . . . . . . . . . .53

Multi-Power Products Ltd. . . . . . . . . . . . . . . .55representative: Tom UlmSeeking representation worldwidePhone: 1-250-869-6969fax: 1-250-860-3340Email: [email protected]: Exploration Drilling EquipmentManufacturer

Norwest Corporation . . . . . . . . . . . . . . . . . . . .44Seeks representation worldwide

PBE (was Mine Radio Systems) . . . . . 27, 110for information on services in this regionfor the PBE Group, please go to:www.pbegrp.com

Reliable Wheel Products Ltd. . . . . . . . . . . 122representative: ronald Prior, VP SalesAddress: Suite 108, 18935 96 AvenueSurrey, British Columbia, V4n 3P3, CanadaPhone: 1-604-882-8994fax: 1-604-357-5100Email: [email protected]: helps maintain heavy equipment

SEI Industries Ltd. . . . . . . . . . . . . . . . . . . 65, 71Address: 7400 Wilson AvenueDelta, British Columbia, V4G 1h3Phone: 1-604-946-3131fax: 1-604-940-9566Email: [email protected]: remote site liquid logistics andenvironmental solutions

Shaw Almex Industries . . . . . . . . . . . . . . . . . .38

Simpson Environmental Corp. . . . . . . . . . . .64Email: [email protected] Services: for your best alternative in water treatment technology anywhere in the world

The Mackwood Group of Companies . . . . .20The Mackwood Group also services markets In north America

Vintech Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

PROTECT YOUR PROFIT MARGIN.INSURE YOUR EXPORT SALES.

Get EDC’s credit insurance … and get paid.

Expanding your sales to customers outside of Canada is a great way to increase your profi ts. But no matter who your customers are, there’s always the risk of not getting paid. With EDC’s credit insurance, you’re covered for up to 90% of your loss if your customer doesn’t pay. Think about it; you wouldn’t run your business without property insurance, so why export without credit insurance? If your company’s biggest asset is your accounts receivable, then it only makes good business sense to ensure they are properly insured.

Learn more about EDC’s credit insurance. edc.ca/creditinsurance


Founded in 1981, CAMESE has become the national voice for Canada’s mining technology, equipment and service exporters. This association provides its members with cost-effective information and international marketing support complementary to members’ own marketing and selling efforts. It is also the only organization collectively representing suppliers in advocating for a strengthened mining industry in Canada.

Camese’s memBeR seRviCes and aCtivities:

iExposure in this annual Compendium of Canadian mining suppliers that is printed in 20,000 copies and distributed worldwide.

iPrompt, organized key information about market conditions, trade shows, trade missions, marketing tips and association news through CAMESE’s Electronic Bulletin. Export sales opportunities are relayed to members through CAMESE’s website-based MinBOS Mining Business Opportunities System.

iadvice and analysis on mining markets worldwide.

iseminars, workshops and advice on how to effectively use trade shows, missions, publications, advertising brochures, public relations, direct mail, Internet and other marketing tools for successful selling to the international mining sector.

iadvocacy of the mining supply sector to the Canadian public and governments.

iCAMESE-led participation with booths and/ or posters in international mining exhibitions.

inetworking with other firms and marketing to the mining sector.

iinternet exposure in English, Spanish and French on the association’s comprehensive website at www.camese.org.

CAMESE provides foreign brokers, agents, distributors and end-users with reliable sources of all types of goods and services used in the mining industry.

Make your inquiries to CAMESE at: Phone: 1-905-513-0046 Fax: 1-905-513-1834 or Email: [email protected]

Those interested in further information about the benefits of membership in CAMESE are invited to contact:

Roy Jakola, Director – Business Development CAMESE Address: Suite 101 345 Renfrew Drive Markham, Ontario, L3R 9S9, Canada Phone: 1-905-513-0046, ext. 303 Fax: 1-905-513-1834 Email: [email protected] Website: www.camese.org

Located in Markham, Ontario, the Canadian Association of

Mining Equipment and Services for Export (CAMESE) is a

trade association made up of more than 300 Canadian

member companies offering products, technologies and

services to the worldwide mining industry. CAMESE also

helps foreign buyers source Canadian mining suppliers.

What is CAMESE?


CAMESE’S People

PrESIDEnTDerek Lawrence, Sales ManagerB.I.D. Canada Ltd.Email: [email protected]

fIrST VICE PrESIDEnTCatharine Shaw, Global Mining Sector LeaderGolder AssociatesEmail: [email protected]

SEConD VICE PrESIDEnTLinda Grieco, DirectorP.R.Engineering, Email: [email protected]

TrEASUrErMichael Gribbons, Vice President, Sales and MarketingMaestro Mine VentilationEmail:[email protected]

PAST PrESIDEnTDerek Keddie PresidentNational Compressed AirEmail: [email protected]

DIrECTorSEric Brouillette, Vice President Sales – Global MiningLaird TechnologiesEmail: [email protected]

Cindy Chesney, General ManagerPyott-Boone Electronics CanadaEmail: [email protected]

Jean-Guy Coulombe, PresidentMansour Mining TechnologiesEmail: [email protected]

Eugene Iacob, Hub Procurement DirectorHatch Management ConsultingEmail: [email protected]

Robert McCarthy, General Manager-AmericasSnowden Mining Industry ConsultantsEmail: [email protected]

Robin Luke Webster, Vice President Business DevelopmentJVX Ltd.Email: [email protected]

CAMESE’s Board of Directors

LEFT TO RIGHT: Bonnie Toews, Managing Editor of CAMESE’s annual Compendium and Website Content; Spencer Ramshaw, Director-Information and Communications; Linda Collins, Office Manager; Roy Jakola, Director-Business Development; Dolores Wharton, Exhibition Manager; Barb Fletcher, Office Assistant; and Jon Baird, Managing Director of CAMESE.

all Camese staff can be reached at [email protected]

(As of the association’s Annual General Meeting held June 4, 2013)


CAMESE Trade Show Calendar 2014

The best way to reach the world at large is to attend international mining exhibitions with CAMESE where you can meet key mining developers and procurement chain partners. Explore new opportunities to export your services, products and technologies to growing mining and mineral markets around the world.

MINING ARABIA RiyadhJanuary 20–23

SME Salt Lake City february 23–26

PDAC Toronto March 2–5

MINING VIETNAM Hanoi March 11–14

CuBA EARTH SCIENCESHavana April 1–4

MINING WoRLD RuSSIA MoscowApril 9–11

EXPoMIN Santiago, ChileApril 21–25

CIM AGM Vancouver May 4–7

EuRo MINING Skelleftia, Sweden June 10–12

LATAM, LATIN AMERICAN MINING Orlando, Florida August 13–15

MINING WoRLD Central Asia September

MINING WoRLD Uzbekistan, Tashkent october

ELECTRA MINING Africa September 15–19

CHINA MINING Beijing September

ARGENTINA MINING Salta, ArgentinaSeptember

MoNGoLIA MINING, Ulaan Baatar, Mongolia September

CoLoMBIA MINING Medellin, Colombia September

MEXICo MINING Mexico october

MINING TuRkEy Ankara, Turkey november

2014


Analytical Laboratories and Supplies

For more detailed information on the services provided by Camese and any trade shows listed online at www.camese.org, please contact:

Roy Jakola, Director – Business Development Phone: 1-905-513-0046, ext.303Fax: 1-905-513-1834Email: [email protected]

Dolores Wharton, Exhibition ManagerPhone: 1-905-513-0046, ext.305Fax:1-905-513-1834Email: [email protected]

Each year, CAMESE monitors information on mining events that take place around the world including conventions, conferences, symposia and exhibitions. After an initial evaluation based on market size, mining activities, potential business opportunities and/or previous editions of the events, we make a selection for presentation to the association’s membership to determine the interest of

individual member companies. On average, 10 to 12 events are chosen annually by CAMESE for participation and organization of a Canadian contingent. CAMESE also partakes in the initiation and organization of other events such as small conferences, workshops, teleconferences and mining trade missions in cooperation with Canadian government institutions.

Depending on the importance of the event and the number of participants, CAMESE provides a broad range of services to the participants. These are:

iprime locations for Canadian exhibit areas at trade shows.

iCompetitive booth prices for CAMESE members in Canada Pavilions.

iassistance to exhibitors on logistics related to the trade show.

iFully equipped individual or shared booths of various sizes.

iCanada pavilion with custom-designed decoration, common areas for meetings, business services, on-site storage area, and booth assistance staff.

isupervised poster display combined with related literature distribution and sales leads generation for CAMESE members without a booth.

idistribution of the CAMESE Compendium of Canadian Mining Suppliers to visitors in the CAMESE poster booth.

CAMESE’s Participation in International Mining Events

neW! an interactive Camese member media Booth. CAMESE is evolving the traditional poster booth to include many more interactive media products. Member companies who cannot personally attend an exhibit offer their marketing messaging in the CAMESE booth through a powerful multi-screen presentation. Member participants provide Power Point slides, a short Video about their products and services and Brochures to be distributed. This media content will be projected onto a series of screens in the poster booth. Visitors will also receive a USB key with all of your content so that they can view your message and other information on their desktop in their office. All sales leads collected in the CAMESE Member Media Booth are sent to media booth participants, along with a comprehensive report on the mining industry represented by the show mission.


Additional CAMESE Members

For those profiles not presented in this Compendium, you can view these members on their member web pages at the Camese website:

www.camese.orgnew members, who joined after August 15 2013, are not listed.

iAble Translations Ltd.

iAecometric Corporation

iAG Mining Equipment Inc.

iAlexa Translations

iAggreko Canada Inc.

iAnchor Danly Fabrications

iArrow Speed Controls

iARVA Industries Inc.

iAspermont Limited

iATTAkRoC Inc.

iBanco BASE Representative office

iBESTECH

iBioteQ Environmental Technologies Inc.

iBoundary Equipment

iBull Powertrain

iBusiness Beyond

iByG Wear Parts Canada (2000) Inc.

iCanadian Diamond Drilling Association

iCanTech Global Distribution Inc.

iCentury Services Inc.

iCk Logistics

iClarida Construction

iCME Blasting and Mining Equipment Ltd.

iConception D. Bedard Inc.

iConspec Controls Ltd.

iConveyor Belt Technology Corp.

iCorrigan Instruments

iCubex Limited

iDemenagement Montreal Express Inc.

iDESSAu

iDEVTRA Inc. “The Checker”

iDynamat Inc.

iDynapro Equipment Ltd.

iEecol Electric Corp.

iEnduride Canada uSA Inc.

iEuro Gear Inc.

iExport Québec

iFedNor International Business Centre



iFilterboxx Packaged Water Solutions

iFondel Chemicals Ltd.

iFordia

i48e Nord International

iFrost Fighter

iGeotec/Plus ultra

iGeotemps International

iGlobal Growth

iGlobal Hydration Water Treatment Systems Inc.

iGowling Lafleur Henderson LLP

iGray Tools Canada Inc.

iGreenfield Energy Solutions

iGT Container Services Inc.

iHardrock Mining Products (Augercorp Div.)

iHelicopters.cl SpA

iHigh Strength Plates & Profiles Inc.

iIcefield Tools Corporation

iI-GARD Corp.

iIndutech Canada LP

iIntierra RMG

iIronPlanet

iJannatec Technologies

iJelka Seals Limited (JSL)

iJetco Heavy Duty Lighting

iJVX Ltd.

iLandry Filtration Products Inc.

iLDL Pneumatique and Hydraulique Inc.

iLubri-Lab Inc.

iMachines Roger International

iMAGNA IV Sudamerica SpA

iMaple Trade Finance

iMaptek™

iMARAC Enterprises Inc.

iMcDowell Group of Companies

iMcElhanney Consulting Services Ltd.

iMedia Environments Inc.

iMetropolitain Valve Inc.

iMicroMentis™ Inc.

iMicromine Canada

iMinepro Personnel Inc.

iMineRP

iMorgan Schaffer Inc.

iMWG Apparel Corp.

iNational Compressed Air

iNCS Technology Inc.

iNewterra

iNewtrax Technologies




As a follow-up to the 2008 legislative changes to the Canada Transportation Act, the federal government recently reviewed rail service by CN and CP, aiming to identify problems, examine best practices and recommend commercial, regulatory or other remedies to improve service. MAC was pleased with the review panel’s recommendations and the federal government’s commitment to enact a shipper’s right to a service-level agreement and a commercial dispute-resolution mechanism (should negotiations break down). MAC will continue to advocate for these changes throughout the legislative process.


iNorFab Metal and Machine

iPacific Bit of Canada Inc.

iPneuma-Tool Inc.

iProcess Research oRTECH Inc.

iRampart Detection Systems

iRaymac Enviromental Services

iRohde & Liesenfeld Canada Inc.

iSantana Advisor (9269-1955 Quebec Inc.)

iSaskatchewan Research Council

iScan-Link Technologies Inc.

iSea Cargo Air Cargo Logistics Inc.

iSea Projects Alliance Inc.

iSenett Control Co. Ltd.

iSkywave Mobile Communications

iSNC-Lavalin Inc.

iSodel Ltd.

iSpray on Plastics Ltd.

iSRk Consulting

iSTC Footwear Inc.

iSystemgroup Consulting Inc.

iTeledyne VariSystems

iTerraquest Ltd.

iTetra Tech (Wardrop)

iTRANS-F-AIR

iTRE Canada Inc.

iTWI Group Inc.

iultra Seat Corporation

iuTC overseas Canada, Inc.

iVancouver Gear Works Ltd.

iVuLCAN-VuLCAP Industries Inc.

iWalden Equipment

iWenco International Mining Systems Ltd.

iWire Rope Industries


Index of CAMESE MembersAdditional CAMESE Members

AA.C.A. howe International Limited . . . . . . . . . . . . . 42

A.L. Sims & Son Ltd. . . . . . . . . . . . . . . . . . . . . . . . . 68

ABC Ventilation Systems . . . . . . . . . . . . . . . . . . . 140

Abitibi Geophysics Inc. . . . . . . . . . . . . . . . . . . . . . . 76

Able Translations Ltd. . . . . . . . . . . . . . . . . . . . . . . 150

Abresist Kalenborn Inc. (Protec Epoxies) . . . . . . . . 93

Accurassay Laboratories . . . . . . . . . . . . . . . . . . . . . 18

Accutron Instruments Inc. . . . . . . . . . . . . . . . . . . . 140

Activation Laboratories Ltd. . . . . . . . . . . . . . . . . . . 18

Aecometric Corporation . . . . . . . . . . . . . . . . . . . . 150

AG Mining Equipment Inc. . . . . . . . . . . . . . . . . . . 150

AGCoS Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Aggreko Canada Inc. . . . . . . . . . . . . . . . . . . . . . . . 150

AIL MInInG (Atlantic Industries Limited). . . . . . . . 87

Airworks Compressors Corp. . . . . . . . . . . . . . . . . . 40

Alexa Translations . . . . . . . . . . . . . . . . . . . . . . . . . 150

Alliance Mercantile (1958) Inc. . . . . . . . . . . . . . . 111

Amelunxen Mineral Processing Ltd. . . . . . . . . . . . 150

American Biltrite . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Anchor Danly fabrications . . . . . . . . . . . . . . . . . . 150

Aran International Ltd. . . . . . . . . . . . . . . . . . . . .33, 87

ArGo ontario Drive & Gear Ltd. . . . . . . . . . . . . . 118

Arkbro Industries . . . . . . . . . . . . . . . . . . . . . . 59, 132

Armtec Limited Partnership . . . . . . . . . . . . . . . . . . 88

Arrow Speed Controls . . . . . . . . . . . . . . . . . . . . . 150

ArVA Industries Inc. . . . . . . . . . . . . . . . . . . . . . . . 150

Aspermont Limited . . . . . . . . . . . . . . . . . . . . . . . . . 150

Assaynet Canada Inc. . . . . . . . . . . . . . . . . . . . . . . 116

Atlas Copco Exploration Products . . . . . . . . . . . . . 50

ATTAKroC Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Axxess International Inc. . . . . . . . . . . . . . . . . . . . . . 127

BB.I.D. Bulk Material handling Systems . . . . . . . . . 32

Banco BASE representative office . . . . . . . . . . 150

BBS Exploration, a division of ThE PrITChArD GroUP . . . . . . . . . . . . . . . . . . 49

Bellville rodair International (BrI) . . . . . . . . . . . . 126

BESTECh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

BIoDISK Corporation . . . . . . . . . . . . . . . . . . . . . . . 62

BioteQ Environmental Technologies Inc. . . . . . . . 150

Black Diamond Group Limited . . . . . . . . . . . . . . . . 40

BluMetric Environmental (Seprotech Systems) . . 63

Boundary Equipment Co. Ltd. . . . . . . . . . . . . . . . 150

BPT Components & Parts Inc. . . . . . . . . . . . . . . . 133

Bradken Mill Liners (norcast Wear) . . . . . . . . . . . . 92

Branson International Incorporated . . . . . . . . . . . 128

BriteSpan Building Systems Inc. . . . . . . . . . . . . . . 29

BTI (Breaker Technology Ltd.) . . . . . . . . . . . . . . . . 34

Bull Powertrain . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Business Beyond . . . . . . . . . . . . . . . . . . . . . . . . . . 150

BYG Wear Parts Canada (2000) Inc. . . . . . . . . . 150

CC.J. Stafford & Associates . . . . . . . . . . . . . . . . . . . 84

Canada north Environmental Services (Cannorth) . . . . . . . . . . . . . . . . . . . . . . . . 61

Canadian Diamond Drilling Association . . . . . . . 150

Canadian Institute of Mining, Metallurgy and Petroleum (CIM) . . . . . . . . . . . . . . 21

Canadian Mining Journal . . . . . . . . . . . . . . . . . . . . . 81

Canadian Wear Technologies . . . . . . . . . . . . .33, 91

CanTech Global Distribution Inc. . . . . . . . . . . . . . 150

Canun International . . . . . . . . . . . . . . . . . . . . . . . . . 50

CDC Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20


Index of CAMESE Members

Centre for Excellence in Mining Innovation (CEMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Century Services Inc. . . . . . . . . . . . . . . . . . . . . . . . 150

Checkfluid Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

CK Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Clarida Group of Companies . . . . . . . . . . . . . . . . 150

CME Blasting and Mining Equipment Ltd. . . . . . 150

CoGEP Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Cole International Inc. . . . . . . . . . . . . . . . . . . . . . . 127

Conception D. Bedard Inc. . . . . . . . . . . . . . . . . . . 150

ConMICo Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Conspec Controls Ltd. . . . . . . . . . . . . . . . . . . . . . 150

Control Chemical (1989) Corporation . . . . . . . . . 51

Conveyor Belt Technology Corp. . . . . . . . . . . . . . 150

Conveyors Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

CorEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Corrigan Instruments . . . . . . . . . . . . . . . . . . . . . . . 150

Cowater International Inc. . . . . . . . . . . . . . . . . . . . . 46

Crone Geophysics & Exploration Ltd. . . . . . . .72, 75

Cubex Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

CWS Industries (Mfg.) Corp. . . . . . . . . . . . . . . . . 119

Cypher Environmental Ltd. . . . . . . . . . . . . . . . . . . . 62

DDassault Systèmes GEoVIA Inc. . . . . . . . . . . . . . 116

Demenagement Montreal Express Inc. . . . . . . . . 150

DESSAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

DEVTrA Inc – The “ChECKEr” . . . . . . . . . . . . . 150

DhL Global forwarding (Canada) Inc. . . . . . . . . 128

Dimatec Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

DMC Mining Services . . . . . . . . . . . . . . . . . . . . . . 104

DrA Americas Inc. . . . . . . . . . . . . . . . . . . . . 42, 103

Dux Machinery Corporation . . . . . . . . . . . . . . . . . 132

Dynamat Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

DYnAPro Equipment Ltd. . . . . . . . . . . . . . . . . . . 150

EEagle Mapping Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . 86

Ecofab Maintenance Ltd. . . . . . . . . . . . . . . . . . . . 130

ECS Electrical Cable Supply Ltd. . . . . . . . . . . . . . . 59

EDC Mining Ltd. . . . . . . . . . . . . . . . . . . . . . . . .60, 84

EECoL Electric Corp. . . . . . . . . . . . . . . . . . . . . . 150

Effigis Geo-Solutions Inc. (VIASAT) . . . . . . . . . . . . 86

Emballage Montreal Express Inc. . . . . . . . . . . . . . 109

Enduride Canada USA Inc. . . . . . . . . . . . . . . . . . . 150

Energold Drilling Group . . . . . . . . . . . . . . . . . . . . . 48

EPCM Services Ltd. . . . . . . . . . . . . . . . . . . . IfC, 112

Euro Gear Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Export Development Canada . . . . . . . . . . . . .70, 145

Export Québec . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

ffabrithane Industrial Products Inc. . . . . . . . . . . . . . 93

falco Technologies Inc. . . . . . . . . . . . . . . . . . . . . . . 35

fednor International Business Centre . . . . . . . . . 151

festo Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

filterboxx Packaged Water Solutions . . . . . . . . . 151

firwin Corp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

fondel Chemicals Ltd. . . . . . . . . . . . . . . . . . . . . . . 151

fordia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

foremost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

48e nord International . . . . . . . . . . . . . . . . . . . . . . 150

fournier Industries Inc. . . . . . . . . . . . . . . . . . . . . . . 91

frost fighter Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 151

future Buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31



GGEM Systems Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 73

GEnEQ Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . .19, 66

Geonics Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Geosight Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Geosoft Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Geotec/Plus Ultra . . . . . . . . . . . . . . . . . . . . . . . . . 151

Geotemps International . . . . . . . . . . . . . . . . . . . . . 151

Gladiator Equipment Inc. . . . . . . . . . . . . . . . . . . . 134

Global Growth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Global hydration Water Treatment Systems Inc. . .151

Global Inspections-nDT, Inc. . . . . . . . . . . . . . . . . . 68

Global Partner Solutions Mining and Industries Inc. . . . . . . . . . . . . . . . . . . . . 84

Golder Associates Ltd. . . . . . . . . . . . . . . . . . . . . . . 43

Gowling Lafleur henderson LLP . . . . . . . . . . . . . 151

Gray Tools Canada Inc. . . . . . . . . . . . . . . . . . . . . . 151

Greatario Engineered Storage Systems . . . . . . . . 71

Greater Sudbury Development Corporation . .13, 22

Greenfield Energy Solutions . . . . . . . . . . . . . . . . . 151

Gridcom Enterprises Ltd. . . . . . . . . . . . . . . . . . . . 120

GT Container Services Inc. . . . . . . . . . . . . . . . . . . 151

hhallmark Insurance Brokers Ltd. . . . . . . . . . . . . . . 83

hard-Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, IBC

hardrock Mining Products Ltd. . . . . . . . . . . . . . . 151

hatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

hayden Diamond Bit Industries Ltd. . . . . . . . . . . . 53

hayward Gordon Ltd. . . . . . . . . . . . . . . . . . . . . . . . 94

hazeland Manufacturing Inc. . . . . .36, 64, 120, 134

heath & Sherwood . . . . . . . . . . . . . . . . . . . . 90, 113

helicopters.cl SpA . . . . . . . . . . . . . . . . . . . . . . . . . 151

hepburn Engineering Inc. . . . . . . . . . . . . . . . .24, 78

hercules Equipment Ltd. . . . . . . . . . . . . . . . . . . . 121

high Strength Plates & Profiles Inc. . . . . . . . . . . . 151

horne Conveyance Safety Ltd. . . . . . . . . . . . . . . . 78

II-GArD Corp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

IC Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 142

Icefield Tools Corporation . . . . . . . . . . . . . . . . . . . 151

IfG Corporation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Industrial Equipment Manufacturing Ltd. . . . . . . . . 34

Industrial fabrication Inc. . . . . . . . . . . . . . . . . . .1351

InfoMine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Inproheat Industries Ltd./SubCom . . . . . . . . . . . . . 79

Instantel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Instrumentation GDD Inc. . . . . . . . . . . . . . . . . . . . . 72

International SoS . . . . . . . . . . . . . . . . . . . . . . . . . 111

Intierra rMG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

IronPlanet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

ITn Logistics Group . . . . . . . . . . . . . . . . . . . . . . . 129

JJannatec Technologies . . . . . . . . . . . . . . . . . . . . . 151

Jelka Seals Limited (JSL) . . . . . . . . . . . . . . . . . . . 151

Jetco heavy Duty Lighting . . . . . . . . . . . . . . . . . . 151

JVX Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

KKovit Engineering . . . . . . . . . . . . . . . . . . . . . . . . . 7, 43

KPM Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95, 101

Kubes Steel Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

LL&M Powertrain Parts . . . . . . . . . . . . . . . . . . 4,5, 132

L. P. royer Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Laird Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Landry filtration Products Inc. . . . . . . . . . . . . . . . 151

Lassing Dibben Consulting Engineers Ltd. . . . . . . 41

Laval Lab Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

LDL Pneumatique hydraulique Inc. . . . . . . . . . . . 151

Lubri-Lab Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Luff Industries Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Lynch fluid Controls Inc. . . . . . . . . . . . . . . . . . . . . . 80



MMaccaferri Canada Ltd. . . . . . . . . . . . . . . . . . . . . . 151

Machines roger International Inc. . . . . . . . . . . . . 151

MacLean Engineering . . . . . . . . . . . . . . . . . . . . . . 136

Maestro Mine Ventilation . . . . . . . . . . . . . . . . . . . . 142

MAGnA IV Sudamerica SpA . . . . . . . . . . . . . . . . 151

Major Drilling Group International Inc. . . . . . . . . . . 48

Major Wire Industries Limited . . . . . . . . . . . . . . . . . 95

Manitoulin Group of Companies . . . . . . . . . . . . . . 129

Mansour Mining Technolgies Inc. . . 56, 77, 114, 141

Manufacture Adria Inc. . . . . . . . . . . . . . . . . . . . . . 151

Maple Trade finance Inc. . . . . . . . . . . . . . . . . . . . 151

Maptek™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

MArAC Enterprises Inc. . . . . . . . . . . . . . . . . . . . . 151

Marcotte Mining Machinery Services Inc.. . . . . . . 135

Marland Enterprises Inc. . . . . . . . . . . . . . . . . . . . . 105

MAXIDrILL Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

McCloskey International Ltd. . . . . . . . . . . . . . . . . . 96

McDowell Group of Companies . . . . . . . . . . . . . . 151

McElhanney Consulting Services Ltd. . . . . . . . . . 151

Mecanicad Inc. . . . . . . . . . . . . 37, 94, 130, 139, 141

Media Environmental Inc. . . . . . . . . . . . . . . . . . . . 151

Megaresistors Corp. . . . . . . . . . . . . . . . . . . . . . . 151

Megatraction Equipment Inc. . . . . . . . . . . . . . . . . . 96

Mercantile Exchange . . . . . . . . . . . . . . . . . . . . . . . . 70

Met-Chem Canada Inc. . . . . . . . . . . . . . . . . . . . . . . 44

Metropolitain Valve Inc. . . . . . . . . . . . . . . . . . . . . . 151

MicroMentis™ Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 151

Micromine Canada . . . . . . . . . . . . . . . . . . . . . . . . 151

Miller Technology Inc. . . . . . . . . . . . . . . . . . . . . . . . 137

Mincon Mining Equipment Inc. . . . . . . . . . . . . . . . . 50

Mine Cable Services Corp. . . . . . . . . . . . . . . . . . . . 58

MinePros Personnel Inc. . . . . . . . . . . . . . . . . . . . . 151

MinerP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

MineSense™ Technologies Ltd. . . . . . . . . . . . . . . 103

Mining Association of Canada (MAC) . . . . . . . . . . 22

Mining Suppliers’ Association of B. C. . . . . . . . . . 23

Mining Technologies International Inc. . . . . . . . . . . 54

Mobile Parts Inc. . . . . . . . . . . . . . . . . . . . . . 119, 136

Montreal Tractor Inc. . . . . . . . . . . . . . . . . . . . . . . . . 93

Morgan Industrial Supply Ltd. . . . . . . . . . . . . . . . . 121

Morgan Schaffer Inc. . . . . . . . . . . . . . . . . . . . . . . . 151

Motion Metrics International Corp. . . . . . . . . . . . . . 39

Moventas Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

MPX Drilling Systems . . . . . . . . . . . . . . . . . . . . . . . 52

Multi-Power Products Ltd. . . . . . . . . . . . . . . . . . . . 55

Multicrete Systems Inc. . . . . . . . . . . . . . . . . . . . . . . 37

Multiurethanes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

MWG Apparel Corp. . . . . . . . . . . . . . . . . . . . . . .1512

nnational Compressed Air . . . . . . . . . . . . . . . . . . . 151

nCS Technology Inc. . . . . . . . . . . . . . . . . . . . . . . . 151

nelmaco Eastern Ltd. . . . . . . . . . . . . . . . . . . . . . . 138

newterra Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

newtrax Technologies Inc. . . . . . . . . . . . . . . . . . . 152

nordic Minesteel Technologies (nMT) . . . . . . . . . 138

norfab Metal and Machine . . . . . . . . . . . . . . . . . . 152

normac Adhesive Products Inc. . . . . . . . . . . . . . . . 67

norseman Structures . . . . . . . . . . . . . . . . . . . . . . . 30

north American Crating Inc. . . . . . . . . . . . . . . . . . 108

northern Light Technologies Inc. (nLT) . . . . . 27, 112

norwest Corporation . . . . . . . . . . . . . . . . . . . . . . . . 44

novaflex Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

ooptech Incorporated . . . . . . . . . . . . . . . . . . . . . . . 107

oro Design & Manufacturing Ltd. . . . . . . . . . . . 122


Analytical Laboratories and SuppliesIndex of CAMESE Members

PPacific Bit of Canada Inc. . . . . . . . . . . . . . . . . . . . 152

Parker Canada Division . . . . . . . . . . . . . . . . . . . . . . 80

Parts headQuarters Inc. . . . . . . . . . . . . . . . . . . . . . 54

Patton & Cooke Co. . . . . . . . . . . . . . . . . . . . . . . . . 59

PBE – Pyott Boone Electronics Canada Limited ( MrS) . . . . . . . . . . . . . . . . . 27, 110

PDAC – e3Plus: A framework for responsible Exploration . . . . . . . . . . . . . . . . . . . . . 46

PDAC – Prospectors and Developers Association of Canada . . . . . . . . . . . . . . . . . . . . . . 23

Penguin Automated Systems Inc. . . . . . . . . . . . . . . 26

Phoenix Geophysics Ltd. . . . . . . . . . . . . . . . . . . . . 74

Piteau Associates . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Pneuma-Tool Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Polar Mobility research Ltd. . . . . . . . . . . . . 123, 139

Polycorp Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Pr Engineering Limited . . . . . . . . . . . . . . . . . . . . . . 97

Praetorian Construction Management . . . . . . .85, 89

Precisioneering Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . 98

PrInoTh Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Process research orTECh Inc. . . . . . . . . . . . . . 152

ProVIX Inc. (Division of Winsted Group) . . . . . . . 39

Pultrusion Technique Inc. . . . . . . . . . . . . . . . . . . . 103

rrahnmet, The Crusher Specialists . . . . . . . . . . . . . 98

rampart Detection Systems . . . . . . . . . . . . . . . . . 152

rapiscan Systems . . . . . . . . . . . . . . . . . . . . . . . . . 106

raymac Environmental Services . . . . . . . . . . . . . 151

rDh Mining Equipment . . . . . . . . . . . . . . . . . . . . 137

rector Machine Works Ltd. . . . . . . . . . . 69, 99, 123

reliable Wheel Products Ltd. . . . . . . . . . . . . . . . . 122

rimex Supply Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . 124

rockwell Automation . . . . . . . . . . . . . . . . . . . . . . . . 28

rocvent Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

rohde & Liesenfeld Canada Inc. . . . . . . . . . . . . . 152

rotesco Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

rST Instruments Ltd. . . . . . . . . . . . . . . . . . . . . . . . 107

SSafari Diamond Bits Ltd. . . . . . . . . . . . . . . . . . . . . . 57

Sander Geophysics Ltd. (SGL) . . . . . . . . . . . . . . . 75

Santana Advisor (9269-1955 Quebec Inc.) . . . . 152

Saskatchewan research Council . . . . . . . . . . . . 152

Scan-Link Technologies Inc. . . . . . . . . . . . . . . . . . 152

Sea Cargo Air Cargo Logistics Inc. . . . . . . . . . . . 152

Sea Projects Alliance Inc. . . . . . . . . . . . . . . . . . . . 152

SEI Industries Ltd. . . . . . . . . . . . . . . . . . . . . . . .65, 71

Senett Control Co. Ltd. . . . . . . . . . . . . . . . . . . . . . 152

Shaw Almex Industries . . . . . . . . . . . . . . . . . . . . . . 38

Sight Power Inc. . . . . . . . . . . . . . . . . . . . . . . . 19, 108

Signature Group of Companies . . . . . . . . . . . . . . . 82

Simpson Environmental Corp. . . . . . . . . . . . . . . . . . 64

Skywave Mobile Communications . . . . . . . . . . . . 152

SnC-Lavalin Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 152

SnL Metals Economics Group . . . . . . . . . . . . . . . 28

Snowden Mining Industry Consultants Inc. . . . . . . 45

Sodel Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

SolidCAD Solutions . . . . . . . . . . . . . . . . . . . . . . . . 28

Solmax International Inc. . . . . . . . . . . . . . . . . . . . . . 66

Spray on Plastics Ltd. . . . . . . . . . . . . . . . . . . . . . 152

Sprung Instant Structures Ltd. . . . . . . . . . . . . . . . . 30

SrK Consulting (Canada) Inc. . . . . . . . . . . . . . . . 152

Stage2Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Standard Machine . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Staticon Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

STC footwear Inc. . . . . . . . . . . . . . . . . . . . . . . . . . 152

StonCor Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

STT Stanco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Systemgroup Consulting Inc. . . . . . . . . . . . . . . . . 152


TTechnosub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Tega Industries Canada Inc. . . . . . . . . . . . . . . . . . . 99

Teledyne VariSystems . . . . . . . . . . . . . . . . . . . . . . 152

Terraquest Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Tetra Tech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

The Mackwood Group of Companies Ltd. . . . . . . 20

The northern Miner . . . . . . . . . . . . . . . . . . . . . . . . . 82

ThreeDify Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Titan Process Equipment Ltd. . . . . . . . . . . . . . . . 100

Tnr Industrial Doors . . . . . . . . . . . . . . . . . . . . . . . . 47

Topax Export Packaging Systems . . . . . . . . . . . . . 109

Tramac Equipment Ltd. . . . . . . . . . . . . . . . . . . . . . . 98

TrAnS-f-AIr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

TrE Canada Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . 152

TWI Group Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

UUltra Seat Corporation . . . . . . . . . . . . . . . . . . . . . 152

Unit Electrical Engineering Ltd. . . . . . . . . . . . . . . . 60

UTC overseas, Inc. . . . . . . . . . . . . . . . . . . . . . . . . 152

VValley Blades Limited . . . . . . . . . . . . . . . . . . . 69, 124

Vancouver Gear Works Ltd. . . . . . . . . . . . . . . . . . 152

Veyance Technologies Canada, Inc. . . . . . . . . 37, 124

Vintech Ltd. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

VULCAn-VULCAP Industries Inc. . . . . . . . . . . . . 152

WWabi Iron & Steel Corp. . . . . . . . . . . . . . . . . . . . . 139

Wainbee Limited . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Walden Equipment . . . . . . . . . . . . . . . . . . . . . . . . 152

Weatherhaven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Wenco International Mining Systems Ltd. . . . . . . 152

Western Drilling Tools Inc. . . . . . . . . . . . . . . . . . . . 57

Westpro Machinery Inc. . . . . . . . . . . . . . . . . . . . . 100

Wire rope Industries . . . . . . . . . . . . . . . . . . . . . . . 152

diReCtoR – inFoRmation and CommuniCationsR. Spencer RamshawPhone: 1-905-513-0046, ext. 304Email: [email protected]

manaGinG editoRBonnie ToewsPhone: 1-905-697-7991Email: [email protected]

Copy editoRLindsay GrummettPhone: 1-905-886-6641, ext. 315Email: [email protected]

CReative diReCtoRSharon MacIntoshPhone: 1-905-886-6641, ext. 311Email: [email protected]

sales manaGeRBeth KukkonenPhone: 1-905-886-6641. Ext. 306Email: [email protected]

sales assoCiateKim CristiniPhone: 1-905-886-6641, ext. 319Email: [email protected]

oFFiCe manaGeRLinda CollinsPhone: 1-905-513-0046, ext. 306Email: [email protected]

oFFiCe assistantBarb FletcherPhone: 1-905-683-0696Email: [email protected]

pHotoGRapHeRGraeme OxbyCover photography and subsector introductionsPhone/fax: 1-705-268-0932Email: [email protected]: 155 Graye CrescentTimmins, ontario, P4n 8K8, Canada

pRepRess and pRintinGDovetail Communications Inc.President: Susan A. BrownePhone: 1-905-886-6641, ext. 314Email: [email protected]

pRoduCtion manaGeRCrystal HimesPhone: 1-905-886-6641, ext. 331Email: [email protected]

pRoduCtion Co-oRdinatoRJoanna ForbesPhone: 1-905-886-6641, ext. 318Email: [email protected]

ISSn 1485-8401


puBlisHeR/CameseManaging Director: Jon BairdAddress: Suite 101, 345 renfrew DriveMarkham, ontario, L3r 9S9, CanadaPhone: 1-905-513-0046, ext. 302fax: 1-905-513-1834Email: [email protected]: www.camese.org

Printed in Canada. All rights reserved.Canadian Publications Mail Agreement no.40033359

2013/2014 cames

e co

mpen

diu

m – can

adian

min

ing tec

hn

olo

gy

Your guide to Canadian mining teChnologY on the internet

www.camese.org

Cana

dian P

ublic

ation

s Mail

Agr

eeme

nt #

4003

3359

2013 2014


Camese CompeNdium

Your guide to Canadian mining technology

Documents

Camese2013 14